Skip to contentSkip to conversation

RISC-V S-mode support

PATCH Superseded Anup Patel 1 participant 4 messages Nov 30, 2018 RISC-V

v6 of 7 Superseded Latest is v7 →

lore
Share & tools
lore

Anup Patel

author
#0 lore raw

v6 cover RISC-V S-mode support

This patchset allows us runing u-boot in S-mode which is useful on platforms where M-mode runtime firmware is an independent firmware and u-boot is used as last stage OS bootloader.

The patchset based upon git://git.denx.de/u-boot-riscv.git
and is tested on QEMU in both M-mode and S-mode.

For S-mode testing, we have used u-boot.bin as payload of latest BBL (at commit 6ebd0f2a46255d0c76dad3c05b16c1d154795d26) applied with following changes:

machine/emulation.c +6 -0
index 132e977..def75e1 100644
@@ -162,6 +162,12 @@ static inline int emulate_read_csr(int num, uintptr_t mstatus, uintptr_t* result
 
   switch (num)
   {
+    case CSR_MISA:
+      *result = read_csr(misa);
+      return 0;
+    case CSR_MHARTID:
+      *result = read_csr(mhartid);
+      return 0;
     case CSR_CYCLE:
       if (!((counteren >> (CSR_CYCLE - CSR_CYCLE)) & 1))
         return -1;

Changes since v5:
- Dropped PATCH4 to remove redundant a2 store on DRAM base in start.S because it will taken care by Rick as separate patch
- Added MODE_PREFIX() macro to generate mode specific CSR names

Changes since v4:
- Rebased series based on commit 52923c6db7f00e0197ec894c8c1bb8a7681974bb of git://git.denx.de/u-boot-riscv.git
- Added a patch to remove redundant a2 store on DRAM base. This store was creating problem booting U-Boot in S-mode using BBL.

Changes since v3:
- Replaced 'u-boot' with 'U-Boot' in commit message
- Dropped 'an' in RISCV_SMODE kconfig option help message
- Added appropriate #ifdef in arch/riscv/lib/interrupts.c

Changes since v2:
- Dropped 'default n" from RISCV_SMODE kconfig option
- Replaced '-smode_' in defconfig names with '_smode_'

Changes since v1:
- Rebased upon latest git://git.denx.de/u-boot-riscv.git
- Add details in cover letter for running u-boot in S-mode using BBL

Anup Patel (3):
riscv: Add kconfig option to run U-Boot in S-mode
riscv: qemu: Use different SYS_TEXT_BASE for S-mode
riscv: Add S-mode defconfigs for QEMU virt machine

 arch/riscv/Kconfig                     |  5 +++++
 arch/riscv/cpu/start.S                 | 23 ++++++++++++-------
 arch/riscv/include/asm/encoding.h      |  6 +++++
 arch/riscv/lib/interrupts.c            | 31 ++++++++++++++++++--------
 board/emulation/qemu-riscv/Kconfig     |  3 ++-
 board/emulation/qemu-riscv/MAINTAINERS |  2 ++
 configs/qemu-riscv32_smode_defconfig   | 10 +++++++++
 configs/qemu-riscv64_smode_defconfig   | 11 +++++++++
 8 files changed, 73 insertions(+), 18 deletions(-)
 create mode 100644 configs/qemu-riscv32_smode_defconfig
 create mode 100644 configs/qemu-riscv64_smode_defconfig
Signature · 1 line
2.17.1
author
#1 lore raw

PATCH v6 1/3 riscv: Add kconfig option to run U-Boot in S-mode

This patch adds kconfig option RISCV_SMODE to run U-Boot in S-mode. When this opition is enabled we use s<xyz> CSRs instead of m<xyz> CSRs.

It is important to note that there is no equivalent S-mode CSR for misa and mhartid CSRs so we expect M-mode runtime firmware (BBL or equivalent) to emulate misa and mhartid CSR read.

In-future, we will have more patches to avoid accessing misa and mhartid CSRs from S-mode.

---
 arch/riscv/Kconfig                |  5 +++++
 arch/riscv/cpu/start.S            | 23 +++++++++++++++--------
 arch/riscv/include/asm/encoding.h |  6 ++++++
 arch/riscv/lib/interrupts.c       | 31 ++++++++++++++++++++++---------
 4 files changed, 48 insertions(+), 17 deletions(-)
arch/riscv/Kconfig +5 -0
index 3e0af55e71..732a357a99 100644
@@ -55,6 +55,11 @@ config RISCV_ISA_C
 config RISCV_ISA_A
 	def_bool y
 
+config RISCV_SMODE
+	bool "Run in S-Mode"
+	help
+	  Enable this option to build U-Boot for RISC-V S-Mode
+
 config 32BIT
 	bool
 
arch/riscv/cpu/start.S +15 -8
index 15e1b8199a..3f055bdb7e 100644
@@ -41,10 +41,10 @@ _start:
 	li	t0, CONFIG_SYS_SDRAM_BASE
 	SREG	a2, 0(t0)
 	la	t0, trap_entry
-	csrw	mtvec, t0
+	csrw	MODE_PREFIX(tvec), t0
 
 	/* mask all interrupts */
-	csrw	mie, zero
+	csrw	MODE_PREFIX(ie), zero
 
 	/* Enable cache */
 	jal	icache_enable
@@ -166,7 +166,7 @@ fix_rela_dyn:
 */
 	la	t0, trap_entry
 	add	t0, t0, t6
-	csrw	mtvec, t0
+	csrw	MODE_PREFIX(tvec), t0
 
 clear_bss:
 	la	t0, __bss_start		/* t0 <- rel __bss_start in FLASH */
@@ -238,17 +238,24 @@ trap_entry:
 	SREG	x29, 29*REGBYTES(sp)
 	SREG	x30, 30*REGBYTES(sp)
 	SREG	x31, 31*REGBYTES(sp)
-	csrr	a0, mcause
-	csrr	a1, mepc
+	csrr	a0, MODE_PREFIX(cause)
+	csrr	a1, MODE_PREFIX(epc)
 	mv	a2, sp
 	jal	handle_trap
-	csrw	mepc, a0
+	csrw	MODE_PREFIX(epc), a0
 
+#ifdef CONFIG_RISCV_SMODE
+/*
+ * Remain in S-mode after sret
+ */
+	li	t0, SSTATUS_SPP
+#else
 /*
  * Remain in M-mode after mret
  */
 	li	t0, MSTATUS_MPP
-	csrs	mstatus, t0
+#endif
+	csrs	MODE_PREFIX(status), t0
 	LREG	x1, 1*REGBYTES(sp)
 	LREG	x2, 2*REGBYTES(sp)
 	LREG	x3, 3*REGBYTES(sp)
@@ -281,4 +288,4 @@ trap_entry:
 	LREG	x30, 30*REGBYTES(sp)
 	LREG	x31, 31*REGBYTES(sp)
 	addi	sp, sp, 32*REGBYTES
-	mret
+	MODE_PREFIX(ret)
arch/riscv/include/asm/encoding.h +6 -0
index 9ea50ce640..97cf906aa6 100644
@@ -7,6 +7,12 @@
 #ifndef RISCV_CSR_ENCODING_H
 #define RISCV_CSR_ENCODING_H
 
+#ifdef CONFIG_RISCV_SMODE
+#define MODE_PREFIX(__suffix)	s##__suffix
+#else
+#define MODE_PREFIX(__suffix)	m##__suffix
+#endif
+
 #define MSTATUS_UIE	0x00000001
 #define MSTATUS_SIE	0x00000002
 #define MSTATUS_HIE	0x00000004
arch/riscv/lib/interrupts.c +22 -9
index 903a1c4cd5..3aff006977 100644
@@ -34,17 +34,30 @@ int disable_interrupts(void)
 	return 0;
 }
 
-ulong handle_trap(ulong mcause, ulong epc, struct pt_regs *regs)
+ulong handle_trap(ulong cause, ulong epc, struct pt_regs *regs)
 {
-	ulong is_int;
+	ulong is_irq, irq;
 
-	is_int = (mcause & MCAUSE_INT);
-	if ((is_int) && ((mcause & MCAUSE_CAUSE)  == IRQ_M_EXT))
-		external_interrupt(0);	/* handle_m_ext_interrupt */
-	else if ((is_int) && ((mcause & MCAUSE_CAUSE)  == IRQ_M_TIMER))
-		timer_interrupt(0);	/* handle_m_timer_interrupt */
-	else
-		_exit_trap(mcause, epc, regs);
+	is_irq = (cause & MCAUSE_INT);
+	irq = (cause & ~MCAUSE_INT);
+
+	if (is_irq) {
+		switch (irq) {
+		case IRQ_M_EXT:
+		case IRQ_S_EXT:
+			external_interrupt(0);	/* handle external interrupt */
+			break;
+		case IRQ_M_TIMER:
+		case IRQ_S_TIMER:
+			timer_interrupt(0);	/* handle timer interrupt */
+			break;
+		default:
+			_exit_trap(cause, epc, regs);
+			break;
+		};
+	} else {
+		_exit_trap(cause, epc, regs);
+	}
 
 	return epc;
 }
Signature · 1 line
2.17.1
author
#2 lore raw

PATCH v6 2/3 riscv: qemu: Use different SYS_TEXT_BASE for S-mode

In reply to Anup Patel

When u-boot runs in S-mode, the M-mode runtime firmware (BBL or equivalent) uses memory range in 0x80000000 to 0x80200000. Due to this, we cannot use 0x80000000 as SYS_TEXT_BASE when running in S-mode. Instead for S-mode, we use 0x80200000 as SYS_TEXT_BASE.

Even Linux RISC-V kernel ignores/reserves memory range 0x80000000 to 0x80200000 because it runs in S-mode.

---
 board/emulation/qemu-riscv/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
board/emulation/qemu-riscv/Kconfig +2 -1
index 33ca253432..56bb5337d4 100644
@@ -13,7 +13,8 @@ config SYS_CONFIG_NAME
 	default "qemu-riscv"
 
 config SYS_TEXT_BASE
-	default 0x80000000
+	default 0x80000000 if !RISCV_SMODE
+	default 0x80200000 if RISCV_SMODE
 
 config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
Signature · 1 line
2.17.1
author
#3 lore raw

PATCH v6 3/3 riscv: Add S-mode defconfigs for QEMU virt machine

In reply to Anup Patel

This patch adds S-mode defconfigs for QEMU virt machine so that we can run u-boot in S-mode on QEMU using M-mode runtime firmware (BBL or equivalent).

---
 board/emulation/qemu-riscv/MAINTAINERS |  2 ++
 configs/qemu-riscv32_smode_defconfig   | 10 ++++++++++
 configs/qemu-riscv64_smode_defconfig   | 11 +++++++++++
 3 files changed, 23 insertions(+)
 create mode 100644 configs/qemu-riscv32_smode_defconfig
 create mode 100644 configs/qemu-riscv64_smode_defconfig
board/emulation/qemu-riscv/MAINTAINERS +2 -0
index 3c6eb4f844..c701c83d77 100644
@@ -4,4 +4,6 @@ S:	Maintained
 F:	board/emulation/qemu-riscv/
 F:	include/configs/qemu-riscv.h
 F:	configs/qemu-riscv32_defconfig
+F:	configs/qemu-riscv32_smode_defconfig
 F:	configs/qemu-riscv64_defconfig
+F:	configs/qemu-riscv64_smode_defconfig
configs/qemu-riscv32_smode_defconfig new file +10 -0
new file mode 100644
index 0000000000..0a84ec1874
@@ -0,0 +1,10 @@
+CONFIG_RISCV=y
+CONFIG_TARGET_QEMU_VIRT=y
+CONFIG_RISCV_SMODE=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_FIT=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_DISPLAY_BOARDINFO=y
+# CONFIG_CMD_MII is not set
+CONFIG_OF_PRIOR_STAGE=y
configs/qemu-riscv64_smode_defconfig new file +11 -0
new file mode 100644
index 0000000000..b012443370
@@ -0,0 +1,11 @@
+CONFIG_RISCV=y
+CONFIG_TARGET_QEMU_VIRT=y
+CONFIG_ARCH_RV64I=y
+CONFIG_RISCV_SMODE=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_FIT=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_DISPLAY_BOARDINFO=y
+# CONFIG_CMD_MII is not set
+CONFIG_OF_PRIOR_STAGE=y
Signature · 1 line
2.17.1