Skip to contentSkip to conversation

arm64: dts: lx2160a: add sata node support

PATCH Superseded Peng Ma 2 participants 2 messages Jan 17, 2019 – Jan 22, 2019

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Peng Ma

author
#0 lore raw

PATCH v3 1/1 arm64: dts: lx2160a: add sata node support

Add SATA device nodes for fsl-lx2160a and enable support for QDS and RDB boards.

---
changed for V3:
- updated the commit log

 arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts |   16 +++++++
 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts |   16 +++++++
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi    |   44 +++++++++++++++++++++
 3 files changed, 76 insertions(+), 0 deletions(-)
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +16 -0
index 99a22ab..1a5acf6 100644
@@ -95,6 +95,22 @@
 	};
 };
 
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +16 -0
index 6481e5f..5b6799e 100644
@@ -102,6 +102,22 @@
 	};
 };
 
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +44 -0

50 lines not on this page · raw message

Signature · 1 line
1.7.1
#1 lore raw
Quoted 72 lines · Peng Ma

Add SATA device nodes for fsl-lx2160a and enable support for QDS and RDB boards.

---
changed for V3:
- updated the commit log

 arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts |   16 +++++++
 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts |   16 +++++++
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi    |   44 +++++++++++++++++++++
 3 files changed, 76 insertions(+), 0 deletions(-)
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +16 -0
index 99a22ab..1a5acf6 100644
@@ -95,6 +95,22 @@
 	};
 };
 
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +16 -0
index 6481e5f..5b6799e 100644
@@ -102,6 +102,22 @@
 	};
 };
 
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +0 -0
index a79f5c1..592034b 100644

arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi line 675

Quoted 5 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +2 -0
@@ -671,6 +671,50 @@
 			status = "disabled";
 		};
 
+		sata0: sata@3200000 {
+			compatible = "fsl,lx2160a-ahci";

I can not find this compatible in any bindings doc.

Shawn

Quoted 48 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +42 -0
+			reg = <0x0 0x3200000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata1: sata@3210000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3210000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata2: sata@3220000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3220000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata3: sata@3230000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3230000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>;
+			dma-coherent;
+			status = "disabled";
+		};
+
 		smmu: iommu@5000000 {
 			compatible = "arm,mmu-500";
 			reg = <0 0x5000000 0 0x800000>;
Signature · 1 line
1.7.1