Skip to contentSkip to conversation

Add support for Gen 11 pipe color features

PATCH In review Uma Shankar 4 participants 12 messages Feb 11, 2019 – Feb 13, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v9 cover Add support for Gen 11 pipe color features

This patch series adds support for Gen11 pipe degamma, CSC and gamma hardware blocks.

CRC checks are not working for 10bit gamma but works for 8bit pallete modes which seems to be due to some rounding errors in pipe. Also there is a corner case where Lut precision is increased to 3.16, hence its not possible to accurately represent 1.0 which will require 17 bits. Support for extending the ABI is already in discussion in below series:
https://patchwork.freedesktop.org/patch/249771/

ToDo: Support for Multi Segmented Gamma will be added later.

v2: Addressed Maarten's review comments and re-ordered the patch series.

v3: Addressed Matt's review comments. Removed rmw patterns as suggested by Matt.

v4: Addressed Matt's review comments.

v5: Addressed Matt's, Ville and Jani Nikula's review comments.

v6: Addressed Matt and Ville's review comments. Extended GLK degamma function and merged ICL degamma support to that. Handled pipe output csc separately along with regular pipe csc. Dropped gamma_mode removal patch as Ville is using that to refactor the gamma handling. This series may need a rebase on top of Ville's below series:
https://patchwork.freedesktop.org/series/55081/.

v7: Rebased the series on top of Ville's color management cleanup and state refactoring series. Addressed Matt's review comments and aligned state handling as per atomic design.

v8: Fixed macro alignment and some checkpatch warnings.

v9: Fix Maarten's review comments and added his RB tag.

Uma Shankar (5):
drm/i915/glk: Fix degamma lut programming drm/i915/icl: Add icl pipe degamma and gamma support drm/i915/icl: Enable ICL Pipe CSC block drm/i915/icl: Enable pipe output csc drm/i915/icl: Add degamma and gamma lut size to gen11 caps

 drivers/gpu/drm/i915/i915_pci.c    |   5 +-
 drivers/gpu/drm/i915/i915_reg.h    |  86 ++++++++++++++++++--
 drivers/gpu/drm/i915/intel_color.c | 155 ++++++++++++++++++++++++++-----------
 drivers/gpu/drm/i915/intel_drv.h   |   3 +
 4 files changed, 194 insertions(+), 55 deletions(-)
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v9 1/5 drm/i915/glk: Fix degamma lut programming

Fixed the glk degamma lut programming which currently was hard coding a linear lut all the time, making degamma block of glk basically a pass through.

Currently degamma lut for glk is assigned as 0 in platform configuration. Updated the same to 33 as per the hardware capability. IGT tests for degamma were getting skipped due to this, spotted by Swati.

ToDo: The current gamma/degamm lut ABI has just 16bit for each color component. This is not enough for GLK+, since input precision is increased to 3.16 which will need 19bit entries.

v2: Added Matt's RB.

v3: Changed uint32_t to u32.

v4: Fixed Maarten's review comment

Credits-to: Swati Sharma <[email protected]>

---
 drivers/gpu/drm/i915/i915_pci.c    |  2 +-
 drivers/gpu/drm/i915/intel_color.c | 62 +++++++++++++++++++++-----------------
 2 files changed, 35 insertions(+), 29 deletions(-)
drivers/gpu/drm/i915/i915_pci.c +1 -1
index 66f82f3..2a4d25c 100644
@@ -75,7 +75,7 @@
 		   .gamma_lut_tests = DRM_COLOR_LUT_NON_DECREASING, \
 	}
 #define GLK_COLORS \
-	.color = { .degamma_lut_size = 0, .gamma_lut_size = 1024, \
+	.color = { .degamma_lut_size = 33, .gamma_lut_size = 1024, \
 		   .degamma_lut_tests = DRM_COLOR_LUT_NON_DECREASING | \
 					DRM_COLOR_LUT_EQUAL_CHANNELS, \
 	}
drivers/gpu/drm/i915/intel_color.c +34 -28

103 lines not on this page · raw message

Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH v9 2/5 drm/i915/icl: Add icl pipe degamma and gamma support

In reply to Uma Shankar

Add support for icl pipe degamma and gamma.

v2: Removed a POSTING_READ and corrected the Bit Definition as per Maarten's comments.

v3: Addressed Matt's review comments. Removed rmw patterns as suggested by Matt.

v4: Fixed Matt's review comments.

v5: Corrected macro alignment as per Jani Nikula's comments. Addressed Ville and Matt's review comments.

v6: Merged ICL degamma handling with GLK and dropped ICL degamma function as per Ville and Matt's comments.

v7: updated gamma_mode state with pre csc gammma and post gamma enabling in intel_color_check to align with atomic.

v8: Addressed Maarten's review comments.

---
 drivers/gpu/drm/i915/i915_reg.h    | 12 +++++++-----
 drivers/gpu/drm/i915/intel_color.c | 21 +++++++++++++++++++--
 2 files changed, 26 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +7 -5
index 11bf60d..13a207a 100644
@@ -7111,11 +7111,13 @@ enum {
 #define _GAMMA_MODE_A		0x4a480
 #define _GAMMA_MODE_B		0x4ac80
 #define GAMMA_MODE(pipe) _MMIO_PIPE(pipe, _GAMMA_MODE_A, _GAMMA_MODE_B)
-#define GAMMA_MODE_MODE_MASK	(3 << 0)
-#define GAMMA_MODE_MODE_8BIT	(0 << 0)
-#define GAMMA_MODE_MODE_10BIT	(1 << 0)
-#define GAMMA_MODE_MODE_12BIT	(2 << 0)
-#define GAMMA_MODE_MODE_SPLIT	(3 << 0)
+#define  PRE_CSC_GAMMA_ENABLE	(1 << 31)
+#define  POST_CSC_GAMMA_ENABLE	(1 << 30)
+#define  GAMMA_MODE_MODE_MASK	(3 << 0)
+#define  GAMMA_MODE_MODE_8BIT	(0 << 0)
+#define  GAMMA_MODE_MODE_10BIT	(1 << 0)
+#define  GAMMA_MODE_MODE_12BIT	(2 << 0)
+#define  GAMMA_MODE_MODE_SPLIT	(3 << 0)
 
 /* DMC/CSR */
 #define CSR_PROGRAM(i)		_MMIO(0x80000 + (i) * 4)
drivers/gpu/drm/i915/intel_color.c +19 -2
index e391899..c5bd0f9 100644
@@ -571,6 +571,17 @@ static void glk_load_luts(const struct intel_crtc_state *crtc_state)
 		bdw_load_gamma_lut(crtc_state, 0);
 }
 
+static void icl_load_luts(const struct intel_crtc_state *crtc_state)
+{
+	glk_load_degamma_lut(crtc_state);
+
+	if (crtc_state_is_legacy_gamma(crtc_state))
+		i9xx_load_luts(crtc_state);
+	else
+		/* ToDo: Add support for multi segment gamma LUT */
+		bdw_load_gamma_lut(crtc_state, 0);
+}
+
 static void cherryview_load_luts(const struct intel_crtc_state *crtc_state)
 {
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
@@ -760,7 +771,11 @@ int intel_color_check(struct intel_crtc_state *crtc_state)
 	    drm_color_lut_check(gamma_lut, gamma_tests))
 		return -EINVAL;
 
-	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
+	if (INTEL_GEN(dev_priv) >= 11)
+		crtc_state->gamma_mode = GAMMA_MODE_MODE_10BIT |
+					 PRE_CSC_GAMMA_ENABLE |
+					 POST_CSC_GAMMA_ENABLE;
+	else if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
 		crtc_state->gamma_mode = GAMMA_MODE_MODE_10BIT;
 	else if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
 		crtc_state->gamma_mode = GAMMA_MODE_MODE_SPLIT;
@@ -784,7 +799,9 @@ void intel_color_init(struct intel_crtc *crtc)
 
 		dev_priv->display.color_commit = i9xx_color_commit;
 	} else {
-		if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
+		if (IS_ICELAKE(dev_priv))
+			dev_priv->display.load_luts = icl_load_luts;
+		else if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
 			dev_priv->display.load_luts = glk_load_luts;
 		else if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
 			dev_priv->display.load_luts = broadwell_load_luts;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH v9 3/5 drm/i915/icl: Enable ICL Pipe CSC block

In reply to Uma Shankar

Enable ICL pipe csc hardware. CSC block is enabled in CSC_MODE register instead of PLANE_COLOR_CTL.

ToDO: Extend the ABI to accept 32 bit coefficient values instead of 16bit for future platforms.

v2: Addressed Maarten's review comments.

v3: Addressed Matt's review comments. Removed rmw patterns as suggested by Matt.

v4: Addressed Matt's review comments.

v5: Addressed Ville's review comments.

v6: Separated pipe output csc programming from regular csc.

v7: Rebase

---
 drivers/gpu/drm/i915/i915_reg.h    | 9 ++++++---
 drivers/gpu/drm/i915/intel_color.c | 5 ++++-
 2 files changed, 10 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +6 -3
index 13a207a..4cb0013 100644
@@ -9885,10 +9885,13 @@ enum skl_power_gate {
 #define _PIPE_A_CSC_COEFF_BU	0x4901c
 #define _PIPE_A_CSC_COEFF_RV_GV	0x49020
 #define _PIPE_A_CSC_COEFF_BV	0x49024
+
 #define _PIPE_A_CSC_MODE	0x49028
-#define   CSC_BLACK_SCREEN_OFFSET	(1 << 2)
-#define   CSC_POSITION_BEFORE_GAMMA	(1 << 1)
-#define   CSC_MODE_YUV_TO_RGB		(1 << 0)
+#define  ICL_CSC_ENABLE			(1 << 31)
+#define  CSC_BLACK_SCREEN_OFFSET	(1 << 2)
+#define  CSC_POSITION_BEFORE_GAMMA	(1 << 1)
+#define  CSC_MODE_YUV_TO_RGB		(1 << 0)
+
 #define _PIPE_A_CSC_PREOFF_HI	0x49030
 #define _PIPE_A_CSC_PREOFF_ME	0x49034
 #define _PIPE_A_CSC_PREOFF_LO	0x49038
drivers/gpu/drm/i915/intel_color.c +4 -1
index c5bd0f9..395b475 100644
@@ -243,7 +243,10 @@ static void ilk_load_csc_matrix(const struct intel_crtc_state *crtc_state)
 		I915_WRITE(PIPE_CSC_POSTOFF_ME(pipe), postoff);
 		I915_WRITE(PIPE_CSC_POSTOFF_LO(pipe), postoff);
 
-		I915_WRITE(PIPE_CSC_MODE(pipe), 0);
+		if (INTEL_GEN(dev_priv) >= 11)
+			I915_WRITE(PIPE_CSC_MODE(pipe), ICL_CSC_ENABLE);
+		else
+			I915_WRITE(PIPE_CSC_MODE(pipe), 0);
 	} else {
 		u32 mode = CSC_MODE_YUV_TO_RGB;
 
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH v9 4/5 drm/i915/icl: Enable pipe output csc

In reply to Uma Shankar

GEN11+ onwards an output csc hardware block has been added. This is after the pipe gamma block and is in addition to the legacy pipe CSC block. Primary use case for this block is to convert RGB to YUV in case sink supports YUV.
This patch adds supports for the same.

v2: This is added after splitting the existing ICL pipe CSC handling. As per Matt's suggestion, made this to co-exist with existing pipe CSC, wherein both can be enabled if a certain usecase arises.

v3: Fixed an issue with co-existence of output csc and normal pipe csc, spotted by Matt. Put the csc mode flag enabling to color_check to align with atomic.

v4: Fixed macro alignment and checkpatch complaints wrt line over 100 characters limit.

---
 drivers/gpu/drm/i915/i915_reg.h    | 65 ++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/intel_color.c | 77 ++++++++++++++++++++++++++++----------
 drivers/gpu/drm/i915/intel_drv.h   |  3 ++
 3 files changed, 126 insertions(+), 19 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +65 -0
index 4cb0013..668e862 100644
@@ -9888,6 +9888,7 @@ enum skl_power_gate {
 
 #define _PIPE_A_CSC_MODE	0x49028
 #define  ICL_CSC_ENABLE			(1 << 31)
+#define  ICL_OUTPUT_CSC_ENABLE		(1 << 30)
 #define  CSC_BLACK_SCREEN_OFFSET	(1 << 2)
 #define  CSC_POSITION_BEFORE_GAMMA	(1 << 1)
 #define  CSC_MODE_YUV_TO_RGB		(1 << 0)
@@ -9927,6 +9928,70 @@ enum skl_power_gate {
 #define PIPE_CSC_POSTOFF_ME(pipe)	_MMIO_PIPE(pipe, _PIPE_A_CSC_POSTOFF_ME, _PIPE_B_CSC_POSTOFF_ME)
 #define PIPE_CSC_POSTOFF_LO(pipe)	_MMIO_PIPE(pipe, _PIPE_A_CSC_POSTOFF_LO, _PIPE_B_CSC_POSTOFF_LO)
 
+/* Pipe Output CSC */
+#define _PIPE_A_OUTPUT_CSC_COEFF_RY_GY	0x49050
+#define _PIPE_A_OUTPUT_CSC_COEFF_BY	0x49054
+#define _PIPE_A_OUTPUT_CSC_COEFF_RU_GU	0x49058
+#define _PIPE_A_OUTPUT_CSC_COEFF_BU	0x4905c
+#define _PIPE_A_OUTPUT_CSC_COEFF_RV_GV	0x49060
+#define _PIPE_A_OUTPUT_CSC_COEFF_BV	0x49064
+#define _PIPE_A_OUTPUT_CSC_PREOFF_HI	0x49068
+#define _PIPE_A_OUTPUT_CSC_PREOFF_ME	0x4906c
+#define _PIPE_A_OUTPUT_CSC_PREOFF_LO	0x49070
+#define _PIPE_A_OUTPUT_CSC_POSTOFF_HI	0x49074
+#define _PIPE_A_OUTPUT_CSC_POSTOFF_ME	0x49078
+#define _PIPE_A_OUTPUT_CSC_POSTOFF_LO	0x4907c
+
+#define _PIPE_B_OUTPUT_CSC_COEFF_RY_GY	0x49150
+#define _PIPE_B_OUTPUT_CSC_COEFF_BY	0x49154
+#define _PIPE_B_OUTPUT_CSC_COEFF_RU_GU	0x49158
+#define _PIPE_B_OUTPUT_CSC_COEFF_BU	0x4915c
+#define _PIPE_B_OUTPUT_CSC_COEFF_RV_GV	0x49160
+#define _PIPE_B_OUTPUT_CSC_COEFF_BV	0x49164
+#define _PIPE_B_OUTPUT_CSC_PREOFF_HI	0x49168
+#define _PIPE_B_OUTPUT_CSC_PREOFF_ME	0x4916c
+#define _PIPE_B_OUTPUT_CSC_PREOFF_LO	0x49170
+#define _PIPE_B_OUTPUT_CSC_POSTOFF_HI	0x49174
+#define _PIPE_B_OUTPUT_CSC_POSTOFF_ME	0x49178
+#define _PIPE_B_OUTPUT_CSC_POSTOFF_LO	0x4917c
+
+#define PIPE_CSC_OUTPUT_COEFF_RY_GY(pipe)	_MMIO_PIPE(pipe,\
+							   _PIPE_A_OUTPUT_CSC_COEFF_RY_GY,\
+							   _PIPE_B_OUTPUT_CSC_COEFF_RY_GY)
+#define PIPE_CSC_OUTPUT_COEFF_BY(pipe)		_MMIO_PIPE(pipe, \
+							   _PIPE_A_OUTPUT_CSC_COEFF_BY, \
+							   _PIPE_B_OUTPUT_CSC_COEFF_BY)
+#define PIPE_CSC_OUTPUT_COEFF_RU_GU(pipe)	_MMIO_PIPE(pipe, \
+							   _PIPE_A_OUTPUT_CSC_COEFF_RU_GU, \
+							   _PIPE_B_OUTPUT_CSC_COEFF_RU_GU)
+#define PIPE_CSC_OUTPUT_COEFF_BU(pipe)		_MMIO_PIPE(pipe, \
+							   _PIPE_A_OUTPUT_CSC_COEFF_BU, \
+							   _PIPE_B_OUTPUT_CSC_COEFF_BU)
+#define PIPE_CSC_OUTPUT_COEFF_RV_GV(pipe)	_MMIO_PIPE(pipe, \
+							   _PIPE_A_OUTPUT_CSC_COEFF_RV_GV, \
+							   _PIPE_B_OUTPUT_CSC_COEFF_RV_GV)
+#define PIPE_CSC_OUTPUT_COEFF_BV(pipe)		_MMIO_PIPE(pipe, \
+							   _PIPE_A_OUTPUT_CSC_COEFF_BV, \
+							   _PIPE_B_OUTPUT_CSC_COEFF_BV)
+#define PIPE_CSC_OUTPUT_PREOFF_HI(pipe)		_MMIO_PIPE(pipe, \
+							   _PIPE_A_OUTPUT_CSC_PREOFF_HI, \
+							   _PIPE_B_OUTPUT_CSC_PREOFF_HI)
+#define PIPE_CSC_OUTPUT_PREOFF_ME(pipe)		_MMIO_PIPE(pipe, \
+							   _PIPE_A_OUTPUT_CSC_PREOFF_ME, \
+							   _PIPE_B_OUTPUT_CSC_PREOFF_ME)
+#define PIPE_CSC_OUTPUT_PREOFF_LO(pipe)		_MMIO_PIPE(pipe, \
+							   _PIPE_A_OUTPUT_CSC_PREOFF_LO, \
+							   _PIPE_B_OUTPUT_CSC_PREOFF_LO)
+#define PIPE_CSC_OUTPUT_POSTOFF_HI(pipe)	_MMIO_PIPE(pipe, \
+							   _PIPE_A_OUTPUT_CSC_POSTOFF_HI, \
+							   _PIPE_B_OUTPUT_CSC_POSTOFF_HI)
+#define PIPE_CSC_OUTPUT_POSTOFF_ME(pipe)	_MMIO_PIPE(pipe, \
+							   _PIPE_A_OUTPUT_CSC_POSTOFF_ME, \
+							   _PIPE_B_OUTPUT_CSC_POSTOFF_ME)
+#define PIPE_CSC_OUTPUT_POSTOFF_LO(pipe)	_MMIO_PIPE(pipe, \
+							   _PIPE_A_OUTPUT_CSC_POSTOFF_LO, \
+							   _PIPE_B_OUTPUT_CSC_POSTOFF_LO)
+
 /* pipe degamma/gamma LUTs on IVB+ */
 #define _PAL_PREC_INDEX_A	0x4A400
 #define _PAL_PREC_INDEX_B	0x4AC00
drivers/gpu/drm/i915/intel_color.c +58 -19

105 lines not on this page · raw message

drivers/gpu/drm/i915/intel_drv.h +3 -0
index 5eb0b66..765c2ff 100644
@@ -942,6 +942,9 @@ struct intel_crtc_state {
 	/* Gamma mode programmed on the pipe */
 	u32 gamma_mode;
 
+	/* CSC mode programmed on the pipe */
+	u32 csc_mode;
+
 	/* bitmask of visible planes (enum plane_id) */
 	u8 active_planes;
 	u8 nv12_planes;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

PATCH v9 5/5 drm/i915/icl: Add degamma and gamma lut size to gen11 caps

In reply to Uma Shankar

Add the degamma and gamma lut sizes to gen11 capability structure.

Note: Currently this doesn't account for the extended range gamma entries and this will be addressed with new segmented gamma ABI in a future patch.

v2: Reorder the patch as per Maarten's suggestion.

v3: Rebase

v4: Updated commit message with a note as per Matt's suggestion.

v5: No Change.

---
 drivers/gpu/drm/i915/i915_pci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_pci.c +2 -1
index 2a4d25c..c4d6b8d 100644
@@ -648,7 +648,8 @@
 	}, \
 	GEN(11), \
 	.ddb_size = 2048, \
-	.has_logical_ring_elsq = 1
+	.has_logical_ring_elsq = 1, \
+	.color = { .degamma_lut_size = 33, .gamma_lut_size = 1024 }
 
 static const struct intel_device_info intel_icelake_11_info = {
 	GEN11_FEATURES,
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

Re: [v9 5/5] drm/i915/icl: Add degamma and gamma lut size to gen11 caps

Op 11-02-2019 om 14:50 schreef Uma Shankar:

Quoted 27 lines

Add the degamma and gamma lut sizes to gen11 capability structure.

Note: Currently this doesn't account for the extended range gamma entries and this will be addressed with new segmented gamma ABI in a future patch.

v2: Reorder the patch as per Maarten's suggestion.

v3: Rebase

v4: Updated commit message with a note as per Matt's suggestion.

v5: No Change.

---
 drivers/gpu/drm/i915/i915_pci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_pci.c +0 -0
index 2a4d25c..c4d6b8d 100644

drivers/gpu/drm/i915/i915_pci.c line 655

Quoted 9 lines
drivers/gpu/drm/i915/i915_pci.c +2 -1
@@ -648,7 +648,8 @@
 	}, \
 	GEN(11), \
 	.ddb_size = 2048, \
-	.has_logical_ring_elsq = 1
+	.has_logical_ring_elsq = 1, \
+	.color = { .degamma_lut_size = 33, .gamma_lut_size = 1024 }
 
 static const struct intel_device_info intel_icelake_11_info = {
 	GEN11_FEATURES,

Thanks, pushed. :)

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#7 lore raw

✓ Fi.CI.BAT: success for Add support for Gen 11 pipe color features (rev9)

In reply to Uma Shankar
== Series Details ==

== Series Details ==

Series: Add support for Gen 11 pipe color features (rev9)
URL : https://patchwork.freedesktop.org/series/51408/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_5588 -> Patchwork_12192
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://patchwork.freedesktop.org/api/1.0/series/51408/revisions/9/mbox/

Known issues
------------

Here are the changes found in Patchwork_12192 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_exec_suspend@basic-s4-devices:
- fi-blb-e6850: PASS -> INCOMPLETE [fdo#107718]

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- fi-byt-clapper: PASS -> FAIL [fdo#103191] / [fdo#107362]

* igt@pm_rpm@basic-rte:
- fi-byt-j1900: PASS -> FAIL [fdo#108800]

#### Possible fixes ####

* igt@i915_selftest@live_execlists:
- fi-apl-guc: INCOMPLETE [fdo#103927] -> PASS

* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a-frame-sequence:
- fi-byt-clapper: FAIL [fdo#103191] / [fdo#107362] -> PASS

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#108800]: https://bugs.freedesktop.org/show_bug.cgi?id=108800
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109567]: https://bugs.freedesktop.org/show_bug.cgi?id=109567

Participating hosts (48 -> 42)
------------------------------

Additional (1): fi-glk-j4005
Missing (7): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-bdw-samus

Build changes
-------------

* Linux: CI_DRM_5588 -> Patchwork_12192

CI_DRM_5588: 133ed6b29f62713f2edd95eac6ccc2ae1d6e4d6e @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4816: f62577c85c9ef0539d468d6fad105b706a15139c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12192: a781ee195597d269666195f2709e7bb404446d55 @ git://anongit.freedesktop.org/gfx-ci/linux

== Linux commits ==

a781ee195597 drm/i915/icl: Add degamma and gamma lut size to gen11 caps 36f26128dafc drm/i915/icl: Enable pipe output csc 843b26b1c649 drm/i915/icl: Enable ICL Pipe CSC block 1b7082b9015e drm/i915/icl: Add icl pipe degamma and gamma support 4656551a2aca drm/i915/glk: Fix degamma lut programming

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12192/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

✓ Fi.CI.IGT: success for Add support for Gen 11 pipe color features (rev9)

In reply to Uma Shankar
== Series Details ==

== Series Details ==

Series: Add support for Gen 11 pipe color features (rev9)
URL : https://patchwork.freedesktop.org/series/51408/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_5588_full -> Patchwork_12192_full
====================================================

Summary
-------

**WARNING**

Minor unknown changes coming with Patchwork_12192_full need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_12192_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in Patchwork_12192_full:

### IGT changes ###

#### Warnings ####

* igt@kms_color@pipe-c-degamma:
- shard-glk: {SKIP} [fdo#109271] -> FAIL +4

Known issues
------------

Here are the changes found in Patchwork_12192_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-b:
- shard-hsw: PASS -> DMESG-WARN [fdo#107956]

* igt@kms_color@pipe-c-ctm-max:
- shard-apl: PASS -> FAIL [fdo#108147]

* igt@kms_cursor_crc@cursor-128x128-suspend:
- shard-hsw: PASS -> INCOMPLETE [fdo#103540]

* igt@kms_cursor_crc@cursor-256x85-sliding:
- shard-apl: PASS -> FAIL [fdo#103232]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-onoff:
- shard-apl: PASS -> FAIL [fdo#103167] +1

* igt@kms_plane@pixel-format-pipe-b-planes-source-clamping:
- shard-apl: PASS -> FAIL [fdo#108948]

* igt@kms_plane@plane-position-covered-pipe-a-planes:
- shard-glk: PASS -> FAIL [fdo#103166]

* igt@kms_plane_multiple@atomic-pipe-c-tiling-yf:
- shard-apl: PASS -> FAIL [fdo#103166] +1

* igt@kms_setmode@basic:
- shard-kbl: PASS -> FAIL [fdo#99912]

#### Possible fixes ####

* igt@gem_eio@unwedge-stress:
- shard-snb: FAIL [fdo#107799] -> PASS

* igt@i915_suspend@fence-restore-untiled:
- shard-snb: INCOMPLETE [fdo#105411] -> PASS

* igt@kms_ccs@pipe-a-crc-sprite-planes-basic:
- shard-glk: FAIL [fdo#108145] -> PASS

* igt@kms_color@pipe-b-ctm-green-to-red:
- shard-glk: {SKIP} [fdo#109271] -> PASS +29

* igt@kms_cursor_legacy@all-pipes-torture-move:
- shard-hsw: DMESG-WARN [fdo#107122] -> PASS

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- shard-glk: FAIL [fdo#103167] -> PASS +1

* igt@kms_plane_multiple@atomic-pipe-a-tiling-x:
- shard-apl: FAIL [fdo#103166] -> PASS +2

#### Warnings ####

* igt@i915_suspend@shrink:
- shard-apl: DMESG-WARN [fdo#107886] / [fdo#109244] -> INCOMPLETE [fdo#103927] / [fdo#106886]
- shard-glk: INCOMPLETE [fdo#103359] / [fdo#106886] / [k.org#198133] -> DMESG-WARN [fdo#109244]

* igt@kms_color@pipe-a-degamma:
- shard-glk: {SKIP} [fdo#109271] -> FAIL [fdo#108145]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#106886]: https://bugs.freedesktop.org/show_bug.cgi?id=106886
[fdo#107122]: https://bugs.freedesktop.org/show_bug.cgi?id=107122
[fdo#107799]: https://bugs.freedesktop.org/show_bug.cgi?id=107799
[fdo#107886]: https://bugs.freedesktop.org/show_bug.cgi?id=107886
[fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
[fdo#108948]: https://bugs.freedesktop.org/show_bug.cgi?id=108948
[fdo#109244]: https://bugs.freedesktop.org/show_bug.cgi?id=109244
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133

Participating hosts (7 -> 5)
------------------------------

Missing (2): shard-skl shard-iclb

Build changes
-------------

* Linux: CI_DRM_5588 -> Patchwork_12192

CI_DRM_5588: 133ed6b29f62713f2edd95eac6ccc2ae1d6e4d6e @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4816: f62577c85c9ef0539d468d6fad105b706a15139c @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12192: a781ee195597d269666195f2709e7bb404446d55 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12192/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#9 lore raw

Re: ✓ Fi.CI.IGT: success for Add support for Gen 11 pipe color features (rev9)

Quoted 40 lines

-----Original Message-----
From: Patchwork [mailto:[email protected]]
Sent: Monday, February 11, 2019 11:16 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]
Subject: ✓ Fi.CI.IGT: success for Add support for Gen 11 pipe color features (rev9)

== Series Details ==

Series: Add support for Gen 11 pipe color features (rev9)
URL : https://patchwork.freedesktop.org/series/51408/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_5588_full -> Patchwork_12192_full
====================================================

Summary
-------

**WARNING**

Minor unknown changes coming with Patchwork_12192_full need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_12192_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in
Patchwork_12192_full:

Quoted 6 lines

### IGT changes ###

#### Warnings ####

* igt@kms_color@pipe-c-degamma:
- shard-glk: {SKIP} [fdo#109271] -> FAIL +4

This is due to CRC mismatch which happens due to rounding issues in pipe. So, crc may not match exactly. These tests rely on crc to match which may not happen here.

We are extending and re-using code from GLK. Currently GLK has all this disabled in driver and hence tests were skipped. But ideally it should not, since its working fine just the crc mismatch are there. It is same for ICL.

Pipe output however is correct and I have verified on simulation that we get exact bit wise match. This is what even we are facing on some of the planar format testing.

For this series, I believe we can mark these tests as known issues with how current hardware behaves. We can create a separate task and work within team to come up with different ideas to test these in CI.

Regards,
Uma Shankar

Quoted 118 lines

Known issues
------------

Here are the changes found in Patchwork_12192_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-b:
- shard-hsw: PASS -> DMESG-WARN [fdo#107956]

* igt@kms_color@pipe-c-ctm-max:
- shard-apl: PASS -> FAIL [fdo#108147]

* igt@kms_cursor_crc@cursor-128x128-suspend:
- shard-hsw: PASS -> INCOMPLETE [fdo#103540]

* igt@kms_cursor_crc@cursor-256x85-sliding:
- shard-apl: PASS -> FAIL [fdo#103232]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-onoff:
- shard-apl: PASS -> FAIL [fdo#103167] +1

* igt@kms_plane@pixel-format-pipe-b-planes-source-clamping:
- shard-apl: PASS -> FAIL [fdo#108948]

* igt@kms_plane@plane-position-covered-pipe-a-planes:
- shard-glk: PASS -> FAIL [fdo#103166]

* igt@kms_plane_multiple@atomic-pipe-c-tiling-yf:
- shard-apl: PASS -> FAIL [fdo#103166] +1

* igt@kms_setmode@basic:
- shard-kbl: PASS -> FAIL [fdo#99912]

#### Possible fixes ####

* igt@gem_eio@unwedge-stress:
- shard-snb: FAIL [fdo#107799] -> PASS

* igt@i915_suspend@fence-restore-untiled:
- shard-snb: INCOMPLETE [fdo#105411] -> PASS

* igt@kms_ccs@pipe-a-crc-sprite-planes-basic:
- shard-glk: FAIL [fdo#108145] -> PASS

* igt@kms_color@pipe-b-ctm-green-to-red:
- shard-glk: {SKIP} [fdo#109271] -> PASS +29

* igt@kms_cursor_legacy@all-pipes-torture-move:
- shard-hsw: DMESG-WARN [fdo#107122] -> PASS

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- shard-glk: FAIL [fdo#103167] -> PASS +1

* igt@kms_plane_multiple@atomic-pipe-a-tiling-x:
- shard-apl: FAIL [fdo#103166] -> PASS +2

#### Warnings ####

* igt@i915_suspend@shrink:
- shard-apl: DMESG-WARN [fdo#107886] / [fdo#109244] -> INCOMPLETE
[fdo#103927] / [fdo#106886]
- shard-glk: INCOMPLETE [fdo#103359] / [fdo#106886] / [k.org#198133] ->
DMESG-WARN [fdo#109244]

* igt@kms_color@pipe-a-degamma:
- shard-glk: {SKIP} [fdo#109271] -> FAIL [fdo#108145]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#106886]: https://bugs.freedesktop.org/show_bug.cgi?id=106886
[fdo#107122]: https://bugs.freedesktop.org/show_bug.cgi?id=107122
[fdo#107799]: https://bugs.freedesktop.org/show_bug.cgi?id=107799
[fdo#107886]: https://bugs.freedesktop.org/show_bug.cgi?id=107886
[fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
[fdo#108948]: https://bugs.freedesktop.org/show_bug.cgi?id=108948
[fdo#109244]: https://bugs.freedesktop.org/show_bug.cgi?id=109244
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133

Participating hosts (7 -> 5)
------------------------------

Missing (2): shard-skl shard-iclb

Build changes
-------------

* Linux: CI_DRM_5588 -> Patchwork_12192

CI_DRM_5588: 133ed6b29f62713f2edd95eac6ccc2ae1d6e4d6e @
git://anongit.freedesktop.org/gfx-ci/linux
IGT_4816: f62577c85c9ef0539d468d6fad105b706a15139c @
git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12192: a781ee195597d269666195f2709e7bb404446d55 @
git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @
git://anongit.freedesktop.org/piglit

Quoted 3 lines

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12192/

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#10 lore raw

Re: ✓ Fi.CI.IGT: success for Add support for Gen 11 pipe color features (rev9)

Quoted 54 lines · Uma
Quoted 40 lines

-----Original Message-----
From: Patchwork [mailto:[email protected]]
Sent: Monday, February 11, 2019 11:16 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]
Subject: ✓ Fi.CI.IGT: success for Add support for Gen 11 pipe color features (rev9)

== Series Details ==

Series: Add support for Gen 11 pipe color features (rev9)
URL : https://patchwork.freedesktop.org/series/51408/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_5588_full -> Patchwork_12192_full
====================================================

Summary
-------

**WARNING**

Minor unknown changes coming with Patchwork_12192_full need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in Patchwork_12192_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in
Patchwork_12192_full:

Quoted 6 lines

### IGT changes ###

#### Warnings ####

* igt@kms_color@pipe-c-degamma:
- shard-glk: {SKIP} [fdo#109271] -> FAIL +4

This is due to CRC mismatch which happens due to rounding issues in pipe. So, crc may not match exactly. These tests rely on crc to match which may not happen here.

We are extending and re-using code from GLK. Currently GLK has all this disabled in driver and hence tests were skipped. But ideally it should not, since its working fine just the crc mismatch are there. It is same for ICL.

Quoted 6 lines

Pipe output however is correct and I have verified on simulation that we get exact bit wise match. This is what even we are facing on some of the planar format testing.

For this series, I believe we can mark these tests as known issues with how current hardware behaves. We can create a separate task and work within team to come up with different ideas to test these in CI.

At least one problem is that the uapi doesn't allow us to say 1.0 which is what we need for all the interpolated gamma modes. Not sure if the test is calculating the other entries correctly either for these interpolated modes.

But not sure if this has anything to do with the crc mismatches.

Anyways series looks all right to me:

A few things we probably would want to do as a followup:
- abstract the output csc vs. pipe csc a bit to avoid the code duplication. Maybe parametrize the registers, or just add a function for each that takes in the coeffs as a parameter.
- readout seems to be missing for the new crtc state stuff

Quoted 129 lines

Regards,
Uma Shankar

Quoted 118 lines

Known issues
------------

Here are the changes found in Patchwork_12192_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-b:
- shard-hsw: PASS -> DMESG-WARN [fdo#107956]

* igt@kms_color@pipe-c-ctm-max:
- shard-apl: PASS -> FAIL [fdo#108147]

* igt@kms_cursor_crc@cursor-128x128-suspend:
- shard-hsw: PASS -> INCOMPLETE [fdo#103540]

* igt@kms_cursor_crc@cursor-256x85-sliding:
- shard-apl: PASS -> FAIL [fdo#103232]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-onoff:
- shard-apl: PASS -> FAIL [fdo#103167] +1

* igt@kms_plane@pixel-format-pipe-b-planes-source-clamping:
- shard-apl: PASS -> FAIL [fdo#108948]

* igt@kms_plane@plane-position-covered-pipe-a-planes:
- shard-glk: PASS -> FAIL [fdo#103166]

* igt@kms_plane_multiple@atomic-pipe-c-tiling-yf:
- shard-apl: PASS -> FAIL [fdo#103166] +1

* igt@kms_setmode@basic:
- shard-kbl: PASS -> FAIL [fdo#99912]

#### Possible fixes ####

* igt@gem_eio@unwedge-stress:
- shard-snb: FAIL [fdo#107799] -> PASS

* igt@i915_suspend@fence-restore-untiled:
- shard-snb: INCOMPLETE [fdo#105411] -> PASS

* igt@kms_ccs@pipe-a-crc-sprite-planes-basic:
- shard-glk: FAIL [fdo#108145] -> PASS

* igt@kms_color@pipe-b-ctm-green-to-red:
- shard-glk: {SKIP} [fdo#109271] -> PASS +29

* igt@kms_cursor_legacy@all-pipes-torture-move:
- shard-hsw: DMESG-WARN [fdo#107122] -> PASS

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- shard-glk: FAIL [fdo#103167] -> PASS +1

* igt@kms_plane_multiple@atomic-pipe-a-tiling-x:
- shard-apl: FAIL [fdo#103166] -> PASS +2

#### Warnings ####

* igt@i915_suspend@shrink:
- shard-apl: DMESG-WARN [fdo#107886] / [fdo#109244] -> INCOMPLETE
[fdo#103927] / [fdo#106886]
- shard-glk: INCOMPLETE [fdo#103359] / [fdo#106886] / [k.org#198133] ->
DMESG-WARN [fdo#109244]

* igt@kms_color@pipe-a-degamma:
- shard-glk: {SKIP} [fdo#109271] -> FAIL [fdo#108145]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#106886]: https://bugs.freedesktop.org/show_bug.cgi?id=106886
[fdo#107122]: https://bugs.freedesktop.org/show_bug.cgi?id=107122
[fdo#107799]: https://bugs.freedesktop.org/show_bug.cgi?id=107799
[fdo#107886]: https://bugs.freedesktop.org/show_bug.cgi?id=107886
[fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
[fdo#108948]: https://bugs.freedesktop.org/show_bug.cgi?id=108948
[fdo#109244]: https://bugs.freedesktop.org/show_bug.cgi?id=109244
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133

Participating hosts (7 -> 5)
------------------------------

Missing (2): shard-skl shard-iclb

Build changes
-------------

* Linux: CI_DRM_5588 -> Patchwork_12192

CI_DRM_5588: 133ed6b29f62713f2edd95eac6ccc2ae1d6e4d6e @
git://anongit.freedesktop.org/gfx-ci/linux
IGT_4816: f62577c85c9ef0539d468d6fad105b706a15139c @
git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12192: a781ee195597d269666195f2709e7bb404446d55 @
git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @
git://anongit.freedesktop.org/piglit

Quoted 3 lines

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12192/

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Signature · 6 lines
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#11 lore raw

Re: ✓ Fi.CI.IGT: success for Add support for Gen 11 pipe color features (rev9)

Quoted 73 lines

-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Tuesday, February 12, 2019 9:56 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] ✓ Fi.CI.IGT: success for Add support for Gen 11 pipe color features (rev9)

Quoted 24 lines · Uma
Quoted 24 lines

-----Original Message-----
From: Patchwork [mailto:[email protected]]
Sent: Monday, February 11, 2019 11:16 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]
Subject: ✓ Fi.CI.IGT: success for Add support for Gen 11 pipe color features (rev9)

== Series Details ==

Series: Add support for Gen 11 pipe color features (rev9)
URL : https://patchwork.freedesktop.org/series/51408/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_5588_full -> Patchwork_12192_full
====================================================

Summary
-------

Quoted 8 lines
Quoted 8 lines

**WARNING**

Minor unknown changes coming with Patchwork_12192_full need to be
verified manually.

If you think the reported changes have nothing to do with the
changes introduced in Patchwork_12192_full, please notify your bug team to allow them to document this new failure mode, which will reduce false

positives in CI.

Quoted 11 lines
Quoted 11 lines

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in
Patchwork_12192_full:

### IGT changes ###

Quoted 7 lines
Quoted 4 lines

#### Warnings ####

* igt@kms_color@pipe-c-degamma:
- shard-glk: {SKIP} [fdo#109271] -> FAIL +4

This is due to CRC mismatch which happens due to rounding issues in pipe. So, crc may not match exactly. These tests rely on crc to match which may not

happen here.

Quoted 3 lines

We are extending and re-using code from GLK. Currently GLK has all
this disabled in driver and hence tests were skipped. But ideally it should not, since

its working fine just the crc mismatch are there.

Quoted 3 lines

It is same for ICL.

Pipe output however is correct and I have verified on simulation that we get exact

bit wise match.

Quoted 2 lines

This is what even we are facing on some of the planar format testing.

Quoted 7 lines
Quoted 3 lines

For this series, I believe we can mark these tests as known issues with how current hardware behaves. We can create a separate task and work within team to come up with different ideas to test these in CI.

At least one problem is that the uapi doesn't allow us to say 1.0 which is what we need for all the interpolated gamma modes. Not sure if the test is calculating the other entries correctly either for these interpolated modes.

Yes I added as part of plane color series to extend the ABI. This definitely will be needed not just for 1.0 but even for 3.0 and 7.0 stuff. But lack of userspace support stalled that. I believe the test is getting values right (except for 1.0) since bmp output is matching on simulation.

Quoted 1 line

But not sure if this has anything to do with the crc mismatches.

I tried to experiment hardcoding inside driver just to confirm this part, but doesn't seem to help.

Quoted 9 lines

Anyways series looks all right to me:

A few things we probably would want to do as a followup:
- abstract the output csc vs. pipe csc a bit to avoid the code duplication. Maybe parametrize the registers, or just add a function for each that takes in the coeffs as a parameter.
- readout seems to be missing for the new crtc state stuff

Sure, will create some internal task to track these and work on it.

Thanks Ville for review and the ack.

Regards,
Uma Shankar

Quoted 123 lines
Quoted 4 lines
Quoted 4 lines

Known issues
------------

Here are the changes found in Patchwork_12192_full that come from known

issues:

Quoted 118 lines
Quoted 118 lines

### IGT changes ###

#### Issues hit ####

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-b:
- shard-hsw: PASS -> DMESG-WARN [fdo#107956]

* igt@kms_color@pipe-c-ctm-max:
- shard-apl: PASS -> FAIL [fdo#108147]

* igt@kms_cursor_crc@cursor-128x128-suspend:
- shard-hsw: PASS -> INCOMPLETE [fdo#103540]

* igt@kms_cursor_crc@cursor-256x85-sliding:
- shard-apl: PASS -> FAIL [fdo#103232]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-onoff:
- shard-apl: PASS -> FAIL [fdo#103167] +1

* igt@kms_plane@pixel-format-pipe-b-planes-source-clamping:
- shard-apl: PASS -> FAIL [fdo#108948]

* igt@kms_plane@plane-position-covered-pipe-a-planes:
- shard-glk: PASS -> FAIL [fdo#103166]

* igt@kms_plane_multiple@atomic-pipe-c-tiling-yf:
- shard-apl: PASS -> FAIL [fdo#103166] +1

* igt@kms_setmode@basic:
- shard-kbl: PASS -> FAIL [fdo#99912]

#### Possible fixes ####

* igt@gem_eio@unwedge-stress:
- shard-snb: FAIL [fdo#107799] -> PASS

* igt@i915_suspend@fence-restore-untiled:
- shard-snb: INCOMPLETE [fdo#105411] -> PASS

* igt@kms_ccs@pipe-a-crc-sprite-planes-basic:
- shard-glk: FAIL [fdo#108145] -> PASS

* igt@kms_color@pipe-b-ctm-green-to-red:
- shard-glk: {SKIP} [fdo#109271] -> PASS +29

* igt@kms_cursor_legacy@all-pipes-torture-move:
- shard-hsw: DMESG-WARN [fdo#107122] -> PASS

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- shard-glk: FAIL [fdo#103167] -> PASS +1

* igt@kms_plane_multiple@atomic-pipe-a-tiling-x:
- shard-apl: FAIL [fdo#103166] -> PASS +2

#### Warnings ####

* igt@i915_suspend@shrink:
- shard-apl: DMESG-WARN [fdo#107886] / [fdo#109244] -> INCOMPLETE
[fdo#103927] / [fdo#106886]
- shard-glk: INCOMPLETE [fdo#103359] / [fdo#106886] / [k.org#198133] ->
DMESG-WARN [fdo#109244]

* igt@kms_color@pipe-a-degamma:
- shard-glk: {SKIP} [fdo#109271] -> FAIL [fdo#108145]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#106886]: https://bugs.freedesktop.org/show_bug.cgi?id=106886
[fdo#107122]: https://bugs.freedesktop.org/show_bug.cgi?id=107122
[fdo#107799]: https://bugs.freedesktop.org/show_bug.cgi?id=107799
[fdo#107886]: https://bugs.freedesktop.org/show_bug.cgi?id=107886
[fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
[fdo#108948]: https://bugs.freedesktop.org/show_bug.cgi?id=108948
[fdo#109244]: https://bugs.freedesktop.org/show_bug.cgi?id=109244
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133

Participating hosts (7 -> 5)
------------------------------

Missing (2): shard-skl shard-iclb

Build changes
-------------

* Linux: CI_DRM_5588 -> Patchwork_12192

CI_DRM_5588: 133ed6b29f62713f2edd95eac6ccc2ae1d6e4d6e @
git://anongit.freedesktop.org/gfx-ci/linux
IGT_4816: f62577c85c9ef0539d468d6fad105b706a15139c @
git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12192: a781ee195597d269666195f2709e7bb404446d55 @
git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @
git://anongit.freedesktop.org/piglit

== Logs ==

For more details see:
https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12192/

Quoted 8 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

--
Ville Syrjälä
Intel

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx