Skip to contentSkip to conversation

dt-bindings: misc: aspeed-p2a-ctrl: add support

PATCH Superseded Patrick Venture 2 participants 3 messages Apr 4, 2019 – Apr 8, 2019

Subsystems (2)

v9 of 10 Superseded Latest is v10 →

lore
Share & tools
lore
#0 lore raw

PATCH v9 1/2 dt-bindings: misc: aspeed-p2a-ctrl: add support

Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.

---
Changes for v9:
- Added missing details about syscon parent
Changes for v8:
- None
Changes for v7:
- Moved node under the syscon node it requires
Changes for v6:
- None
Changes for v5:
- None
Changes for v4:
- None
Changes for v3:
- None
Changes for v2:
- Added comment about syscon required parameter.

---
 .../bindings/misc/aspeed-p2a-ctrl.txt         | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +56 -0
new file mode 100644
index 0000000000000..05ed654848b60
@@ -0,0 +1,56 @@
+======================================================================
+Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver
+======================================================================
+
+The bridge is available on platforms with the VGA enabled on the Aspeed device.
+In this case, the host has access to a 64KiB window into all of the BMC's
+memory.  The BMC can disable this bridge.  If the bridge is enabled, the host
+has read access to all the regions of memory, however the host only has read
+and write access depending on a register controlled by the BMC.
+
+Required properties:
+===================
+
+ - compatible: must be one of:
+	- "aspeed,ast2400-p2a-ctrl"
+	- "aspeed,ast2500-p2a-ctrl"
+
+Optional properties:
+===================
+
+- memory-region: A phandle to a reserved_memory region to be used for the PCI
+		to AHB mapping
+
+The p2a-control node should be the child of a syscon node with the required
+property:
+
+- compatible : Should be one of the following:
+		"aspeed,ast2400-scu", "syscon", "simple-mfd"
+		"aspeed,g4-scu", "syscon", "simple-mfd"
+		"aspeed,ast2500-scu", "syscon", "simple-mfd"
+		"aspeed,g5-scu", "syscon", "simple-mfd"
+
+The aspeed-p2a-ctrl node should be the child of a syscon node with the required
+property:
+
+- compatible : Should be one of the following:
+		"aspeed,ast2400-scu", "syscon", "simple-mfd"
+		"aspeed,g4-scu", "syscon", "simple-mfd"
+		"aspeed,ast2500-scu", "syscon", "simple-mfd"
+		"aspeed,g5-scu", "syscon", "simple-mfd"
+
+Example
+===================
+
+g4 Example
+----------
+
+syscon: scu at 1e6e2000 {
+	compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+	reg = <0x1e6e2000 0x1a8>;
+
+	p2a: p2a-control {
+		compatible = "aspeed,ast2400-p2a-ctrl";
+		memory-region = <&reserved_memory>;
+	};
+};
Signature · 1 line
2.21.0.392.gf8f6787159e-goog
#1 lore raw
Quoted 74 lines · Patrick Venture

Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.

---
Changes for v9:
- Added missing details about syscon parent
Changes for v8:
- None
Changes for v7:
- Moved node under the syscon node it requires
Changes for v6:
- None
Changes for v5:
- None
Changes for v4:
- None
Changes for v3:
- None
Changes for v2:
- Added comment about syscon required parameter.

---
 .../bindings/misc/aspeed-p2a-ctrl.txt         | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +2 -0
new file mode 100644
index 0000000000000..05ed654848b60
@@ -0,0 +1,56 @@
+======================================================================
+Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge 

Control Driver
+======================================================================

Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +2 -0
+
+The bridge is available on platforms with the VGA enabled on the 

Aspeed device.
+In this case, the host has access to a 64KiB window into all of the BMC's
+memory. The BMC can disable this bridge. If the bridge is enabled, the host
+has read access to all the regions of memory, however the host only has read

Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +13 -0
+and write access depending on a register controlled by the BMC.
+
+Required properties:
+===================
+
+ - compatible: must be one of:
+	- "aspeed,ast2400-p2a-ctrl"
+	- "aspeed,ast2500-p2a-ctrl"
+
+Optional properties:
+===================
+
+- memory-region: A phandle to a reserved_memory region to be used for 

the PCI

Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +3 -0
+		to AHB mapping
+
+The p2a-control node should be the child of a syscon node with the 

required

Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +9 -0
+property:
+
+- compatible : Should be one of the following:
+		"aspeed,ast2400-scu", "syscon", "simple-mfd"
+		"aspeed,g4-scu", "syscon", "simple-mfd"
+		"aspeed,ast2500-scu", "syscon", "simple-mfd"
+		"aspeed,g5-scu", "syscon", "simple-mfd"
+
+The aspeed-p2a-ctrl node should be the child of a syscon node with the 

required

Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt line 31

Quoted 7 lines
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +7 -0
+property:
+
+- compatible : Should be one of the following:
+		"aspeed,ast2400-scu", "syscon", "simple-mfd"
+		"aspeed,g4-scu", "syscon", "simple-mfd"
+		"aspeed,ast2500-scu", "syscon", "simple-mfd"
+		"aspeed,g5-scu", "syscon", "simple-mfd"

Agh, now the info's here twice!

Next time, surely :D

Unless Greg or Rob want to chop one out as they apply it? It looks good to me otherwise.

Andrew

Quoted 20 lines
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +16 -0
+
+Example
+===================
+
+g4 Example
+----------
+
+syscon: scu at 1e6e2000 {
+	compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+	reg = <0x1e6e2000 0x1a8>;
+
+	p2a: p2a-control {
+		compatible = "aspeed,ast2400-p2a-ctrl";
+		memory-region = <&reserved_memory>;
+	};
+};
Signature · 1 line
2.21.0.392.gf8f6787159e-goog
#2 lore raw
Quoted 79 lines · Andrew Jeffery
Quoted 75 lines · Patrick Venture

Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.

---
Changes for v9:
- Added missing details about syscon parent
Changes for v8:
- None
Changes for v7:
- Moved node under the syscon node it requires
Changes for v6:
- None
Changes for v5:
- None
Changes for v4:
- None
Changes for v3:
- None
Changes for v2:
- Added comment about syscon required parameter.

---
 .../bindings/misc/aspeed-p2a-ctrl.txt         | 56 +++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +2 -0
new file mode 100644
index 0000000000000..05ed654848b60
@@ -0,0 +1,56 @@
+======================================================================
+Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge

Control Driver
+======================================================================

Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +2 -0
+
+The bridge is available on platforms with the VGA enabled on the

Aspeed device.
+In this case, the host has access to a 64KiB window into all of the BMC's
+memory. The BMC can disable this bridge. If the bridge is enabled, the host
+has read access to all the regions of memory, however the host only has read

Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +13 -0
+and write access depending on a register controlled by the BMC.
+
+Required properties:
+===================
+
+ - compatible: must be one of:
+     - "aspeed,ast2400-p2a-ctrl"
+     - "aspeed,ast2500-p2a-ctrl"
+
+Optional properties:
+===================
+
+- memory-region: A phandle to a reserved_memory region to be used for

the PCI

Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +3 -0
+             to AHB mapping
+
+The p2a-control node should be the child of a syscon node with the

required

Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +9 -0
+property:
+
+- compatible : Should be one of the following:
+             "aspeed,ast2400-scu", "syscon", "simple-mfd"
+             "aspeed,g4-scu", "syscon", "simple-mfd"
+             "aspeed,ast2500-scu", "syscon", "simple-mfd"
+             "aspeed,g5-scu", "syscon", "simple-mfd"
+
+The aspeed-p2a-ctrl node should be the child of a syscon node with the

required
+property:

Quoted 8 lines

Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt line 31

Quoted 6 lines
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +6 -0
+
+- compatible : Should be one of the following:
+             "aspeed,ast2400-scu", "syscon", "simple-mfd"
+             "aspeed,g4-scu", "syscon", "simple-mfd"
+             "aspeed,ast2500-scu", "syscon", "simple-mfd"
+             "aspeed,g5-scu", "syscon", "simple-mfd"

Agh, now the info's here twice!

Agh! I don't even know how that happened. Perhaps I was overzealous in my pasting! I can fix it.

Quoted 28 lines

Next time, surely :D

Unless Greg or Rob want to chop one out as they apply it? It looks good to me otherwise.

Andrew

Quoted 20 lines
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +16 -1
+
+Example
+===================
+
+g4 Example
+----------
+
+syscon: scu at 1e6e2000 {
+     compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+     reg = <0x1e6e2000 0x1a8>;
+
+     p2a: p2a-control {
+             compatible = "aspeed,ast2400-p2a-ctrl";
+             memory-region = <&reserved_memory>;
+     };
+};
--

2.21.0.392.gf8f6787159e-goog