dt-bindings: misc: aspeed-p2a-ctrl: add support
Subsystems (2)
PATCH v10 1/2 dt-bindings: misc: aspeed-p2a-ctrl: add support
Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.
---
Changes for v10:
- Chopped out nearly identical information.
Changes for v9:
- Added missing details about syscon parent
Changes for v8:
- None
Changes for v7:
- Moved node under the syscon node it requires
Changes for v6:
- None
Changes for v5:
- None
Changes for v4:
- None
Changes for v3:
- None
Changes for v2:
- Added comment about syscon required parameter.
--- .../bindings/misc/aspeed-p2a-ctrl.txt | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +47 -0
@@ -0,0 +1,47 @@ +====================================================================== +Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver +====================================================================== + +The bridge is available on platforms with the VGA enabled on the Aspeed device. +In this case, the host has access to a 64KiB window into all of the BMC's +memory. The BMC can disable this bridge. If the bridge is enabled, the host +has read access to all the regions of memory, however the host only has read +and write access depending on a register controlled by the BMC. + +Required properties: +=================== + + - compatible: must be one of: + - "aspeed,ast2400-p2a-ctrl" + - "aspeed,ast2500-p2a-ctrl" + +Optional properties: +=================== + +- memory-region: A phandle to a reserved_memory region to be used for the PCI + to AHB mapping + +The p2a-control node should be the child of a syscon node with the required +property: + +- compatible : Should be one of the following: + "aspeed,ast2400-scu", "syscon", "simple-mfd" + "aspeed,g4-scu", "syscon", "simple-mfd" + "aspeed,ast2500-scu", "syscon", "simple-mfd" + "aspeed,g5-scu", "syscon", "simple-mfd" + +Example +=================== + +g4 Example +---------- + +syscon: scu at 1e6e2000 { + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + p2a: p2a-control { + compatible = "aspeed,ast2400-p2a-ctrl"; + memory-region = <&reserved_memory>; + }; +};
Signature · 1 line
2.21.0.392.gf8f6787159e-goog
Quoted 4 lines · Patrick Venture
Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.
Signed-off-by Patrick Venture <[email protected]>Reviewed-by Rob Herring <[email protected]>
Quoted 89 lines
---
Changes for v10:
- Chopped out nearly identical information.
Changes for v9:
- Added missing details about syscon parent
Changes for v8:
- None
Changes for v7:
- Moved node under the syscon node it requires
Changes for v6:
- None
Changes for v5:
- None
Changes for v4:
- None
Changes for v3:
- None
Changes for v2:
- Added comment about syscon required parameter.--- .../bindings/misc/aspeed-p2a-ctrl.txt | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txtDocumentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +2
-0@@ -0,0 +1,47 @@ +====================================================================== +Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB BridgeControl Driver
+======================================================================Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +2
-0+ +The bridge is available on platforms with the VGA enabled on theAspeed device.
+In this case, the host has access to a 64KiB window into all of the BMC's
+memory. The BMC can disable this bridge. If the bridge is enabled, the host
+has read access to all the regions of memory, however the host only has readDocumentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +13
-0+and write access depending on a register controlled by the BMC. + +Required properties: +=================== + + - compatible: must be one of: + - "aspeed,ast2400-p2a-ctrl" + - "aspeed,ast2500-p2a-ctrl" + +Optional properties: +=================== + +- memory-region: A phandle to a reserved_memory region to be used forthe PCI
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +3
-0+ to AHB mapping + +The p2a-control node should be the child of a syscon node with therequired
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +23
-0+property: + +- compatible : Should be one of the following: + "aspeed,ast2400-scu", "syscon", "simple-mfd" + "aspeed,g4-scu", "syscon", "simple-mfd" + "aspeed,ast2500-scu", "syscon", "simple-mfd" + "aspeed,g5-scu", "syscon", "simple-mfd" + +Example +=================== + +g4 Example +---------- + +syscon: scu at 1e6e2000 { + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + p2a: p2a-control { + compatible = "aspeed,ast2400-p2a-ctrl"; + memory-region = <&reserved_memory>; + }; +};Signature · 1 line
2.21.0.392.gf8f6787159e-goog
Quoted 92 lines · Andrew Jeffery
Quoted 4 lines · Patrick Venture
Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.
Signed-off-by Patrick Venture <[email protected]>Reviewed-by Rob Herring <[email protected]>Reviewed-by Andrew Jeffery <[email protected]>Quoted 81 lines
---
Changes for v10:
- Chopped out nearly identical information.
Changes for v9:
- Added missing details about syscon parent
Changes for v8:
- None
Changes for v7:
- Moved node under the syscon node it requires
Changes for v6:
- None
Changes for v5:
- None
Changes for v4:
- None
Changes for v3:
- None
Changes for v2:
- Added comment about syscon required parameter.--- .../bindings/misc/aspeed-p2a-ctrl.txt | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txtDocumentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +2
-0@@ -0,0 +1,47 @@ +====================================================================== +Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB BridgeControl Driver
+======================================================================Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +2
-0+ +The bridge is available on platforms with the VGA enabled on theAspeed device.
+In this case, the host has access to a 64KiB window into all of the BMC's
+memory. The BMC can disable this bridge. If the bridge is enabled, the host
+has read access to all the regions of memory, however the host only has readDocumentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +13
-0+and write access depending on a register controlled by the BMC. + +Required properties: +=================== + + - compatible: must be one of: + - "aspeed,ast2400-p2a-ctrl" + - "aspeed,ast2500-p2a-ctrl" + +Optional properties: +=================== + +- memory-region: A phandle to a reserved_memory region to be used forthe PCI
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +3
-0+ to AHB mapping + +The p2a-control node should be the child of a syscon node with therequired
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +19
-0+property: + +- compatible : Should be one of the following: + "aspeed,ast2400-scu", "syscon", "simple-mfd" + "aspeed,g4-scu", "syscon", "simple-mfd" + "aspeed,ast2500-scu", "syscon", "simple-mfd" + "aspeed,g5-scu", "syscon", "simple-mfd" + +Example +=================== + +g4 Example +---------- + +syscon: scu at 1e6e2000 { + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + + p2a: p2a-control {
Quoted 8 lines
Quoted 8 lines
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt new file +4
-1+ compatible = "aspeed,ast2400-p2a-ctrl"; + memory-region = <&reserved_memory>; + }; +}; --2.21.0.392.gf8f6787159e-goog
I'm sorry, is there something more I need to do with the patch series?
Sometimes I miss emails.
Thanks,
Patrick