arm64: dts: ls1028a: Add USB dt nodes
Subsystems (2)
PATCH v4 1/1 arm64: dts: ls1028a: Add USB dt nodes
This patch adds USB dt nodes for LS1028A.
Signed-off-by Ran Wang <[email protected]>
---
Changes in v4:
- Move nodes to follow rule of unit-address in the address.
- Use macro to replace 'interrupts' values.
Changes in v3:
- Add space between label and node name.
- Add spcae with properties and '='.
- Add SoC specific compatible.
Changes in v2:
- Rename node from usb3@... to usb@... to meet DTSpec
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +20 -0
@@ -294,6 +294,26 @@ status = "disabled"; }; + usb0: usb@3100000 { + compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_rxdet_inp3_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + }; + + usb1: usb@3110000 { + compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_rxdet_inp3_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + }; + sata: sata@3200000 { compatible = "fsl,ls1028a-ahci"; reg = <0x0 0x3200000 0x0 0x10000>,
Signature · 1 line
1.7.1
Shawn Guo
AppliedQuoted 3 lines · Ran Wang
This patch adds USB dt nodes for LS1028A.
Signed-off-by Ran Wang <[email protected]>
Applied, thanks.