Skip to contentSkip to conversation

arm64: dts: ls1028a: Add USB dt nodes

PATCH Applied Ran Wang 2 participants 2 messages May 17, 2019 – May 23, 2019

Subsystems (2)
lore
Share & tools
lore

Ran Wang

author
#0 lore raw

PATCH v4 1/1 arm64: dts: ls1028a: Add USB dt nodes

This patch adds USB dt nodes for LS1028A.

---
Changes in v4:
- Move nodes to follow rule of unit-address in the address.
- Use macro to replace 'interrupts' values.

Changes in v3:
- Add space between label and node name.
- Add spcae with properties and '='.
- Add SoC specific compatible.

Changes in v2:
- Rename node from usb3@... to usb@... to meet DTSpec

 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +20 -0
index 8dd3501..e4ed17f 100644
@@ -294,6 +294,26 @@
 			status = "disabled";
 		};
 
+		usb0: usb@3100000 {
+			compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+			reg = <0x0 0x3100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,dis_rxdet_inp3_quirk;
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+		};
+
+		usb1: usb@3110000 {
+			compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+			reg = <0x0 0x3110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "host";
+			snps,dis_rxdet_inp3_quirk;
+			snps,quirk-frame-length-adjustment = <0x20>;
+			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+		};
+
 		sata: sata@3200000 {
 			compatible = "fsl,ls1028a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>,
Signature · 1 line
1.7.1