arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
Subsystems (2)
v2 cover arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
This is a follow up a patch that didn't create a separate dts:
https://lists.denx.de/pipermail/u-boot/2019-July/379109.html
A64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants.
The Linux kernel upstream has chosen to create and use a separate device tree for the eMMC variants instead of adding eMMC support existing device tree. These changes to Linux kernel are queued for Linux 5.4.
This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux device-tree.
Changes:
v2: Separate device tree for emmc models.
Sunil Mohan Adapa (2):
arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
configs: sun50i: Add support for Olimex A64-Olinuxino-eMMC
arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-a64-olinuxino-emmc.dts | 23 ++++++++++++++++++++++ board/sunxi/MAINTAINERS | 5 +++++ configs/a64-olinuxino-emmc_defconfig | 17 ++++++++++++++++ 4 files changed, 46 insertions(+) create mode 100644 arch/arm/dts/sun50i-a64-olinuxino-emmc.dts create mode 100644 configs/a64-olinuxino-emmc_defconfig
Signature · 1 line
2.20.1
PATCH v2 1/2 arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
A64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants.
The Linux kernel upstream has chosen to create and use a separate device tree for the eMMC variants instead of adding eMMC support existing device tree. These changes to Linux kernel are queued for Linux 5.4.
This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux device-tree.
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-a64-olinuxino-emmc.dts | 23 ++++++++++++++++++++++ 2 files changed, 24 insertions(+) create mode 100644 arch/arm/dts/sun50i-a64-olinuxino-emmc.dts
arch/arm/dts/Makefile +1 -0
@@ -530,6 +530,7 @@ dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-nanopi-a64.dtb \ sun50i-a64-oceanic-5205-5inmfd.dtb \ sun50i-a64-olinuxino.dtb \ + sun50i-a64-olinuxino-emmc.dtb \ sun50i-a64-orangepi-win.dtb \ sun50i-a64-pine64-lts.dtb \ sun50i-a64-pine64-plus.dtb \
arch/arm/dts/sun50i-a64-olinuxino-emmc.dts new file +23 -0
@@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Martin Ayotte <[email protected]> + * Copyright (C) 2019 Sunil Mohan Adapa <[email protected]> + */ + +#include "sun50i-a64-olinuxino.dts" + +/ { + model = "Olimex A64-Olinuxino-eMMC"; + compatible = "olimex,a64-olinuxino-emmc", "allwinner,sun50i-a64"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +};
Signature · 1 line
2.20.1
PATCH v2 2/2 configs: sun50i: Add support for Olimex A64-Olinuxino-eMMC
In reply to Sunil Mohan AdapaA64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants.
The Linux kernel upstream has chosen to create and use a separate device tree for the eMMC variants instead of adding eMMC support existing device tree. These changes to Linux kernel are queued for Linux 5.4.
Based on a64-olinuxino_defconfig.
This patch has been tested on A64-OLinuXino-1Ge16GW.
--- board/sunxi/MAINTAINERS | 5 +++++ configs/a64-olinuxino-emmc_defconfig | 17 +++++++++++++++++ 2 files changed, 22 insertions(+) create mode 100644 configs/a64-olinuxino-emmc_defconfig
board/sunxi/MAINTAINERS +5 -0
@@ -106,6 +106,11 @@ M: Jagan Teki <[email protected]> S: Maintained F: configs/a64-olinuxino_defconfig +A64-OLINUXINO-EMMC BOARD +M: Sunil Mohan Adapa <[email protected]> +S: Maintained +F: configs/a64-olinuxino-emmc_defconfig + A80 OPTIMUS BOARD M: Chen-Yu Tsai <[email protected]> S: Maintained
configs/a64-olinuxino-emmc_defconfig new file +17 -0
@@ -0,0 +1,17 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL=y +CONFIG_MACH_SUN50I=y +CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_USE_PREBOOT=y +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-olinuxino-emmc" +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
Signature · 1 line
2.20.1
v2 cover arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
In reply to Sunil Mohan AdapaQuoted 19 lines · Sunil Mohan Adapa
This is a follow up a patch that didn't create a separate dts:
https://lists.denx.de/pipermail/u-boot/2019-July/379109.htmlA64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants.The Linux kernel upstream has chosen to create and use a separate device tree for the eMMC variants instead of adding eMMC support existing device tree. These changes to Linux kernel are queued for Linux 5.4.
This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux device-tree.
Quoted 7 lines
Changes:
v2: Separate device tree for emmc models.
Sunil Mohan Adapa (2):
arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
configs: sun50i: Add support for Olimex A64-Olinuxino-eMMC
Please squash and send it as single patch, all look fine to me.
v2 cover arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
Quoted 24 lines · Jagan Teki
Quoted 23 lines · Sunil Mohan Adapa
This is a follow up a patch that didn't create a separate dts:
https://lists.denx.de/pipermail/u-boot/2019-July/379109.htmlA64 OLinuXino board from Olimex has three variants with onboard eMMC:
A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants.The Linux kernel upstream has chosen to create and use a separate device tree for the eMMC variants instead of adding eMMC support existing device tree. These changes to Linux kernel are queued for Linux 5.4.
This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux device-tree.
Changes:
v2: Separate device tree for emmc models.
Quoted 8 lines
Quoted 3 lines
Sunil Mohan Adapa (2):
arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)
configs: sun50i: Add support for Olimex A64-Olinuxino-eMMCPlease squash and send it as single patch, all look fine to me.
Reviewed-by Jagan Teki <[email protected]>
Thank you for reviewing the patch. I have posted v3 with the two patches squashed.
Signature · 9 lines
Sunil -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190910/1dc2b681/attachment.sig>