spl: Introduce SPL_DM_SPI Kconfig define
PATCH 1/1 spl: Introduce SPL_DM_SPI Kconfig define
This define indicates if DM_SPI shall be supported in SPL. This allows proper operation of DM converted SPI drivers in SPL, which use #if !CONFIG_IS_ENABLED(DM_SPI) to also support not yet DM/DTS converted boards.
---
Applied on top of -master branch:
SHA1: 448f11f7503995746a7b71e5e3b3a831c4651be9
This patch is a first step for converting SPI #defines to Kconfig. It was a part of "CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*" patch:
https://patchwork.ozlabs.org/patch/1158141/
which in spite of not introducing the apparent build breaks, was responsible for some deltas in SPL and U-Boot proper sizes (some parts of SPI code was not compiled in). To fix those board/SoC access to real HW is necessary as well as deep understanding of SPL SPI requirements.
--- common/spl/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+)
common/spl/Kconfig +7 -0
@@ -683,6 +683,13 @@ config SPL_UBI Enable support for loading payloads from UBI. See README.ubispl for more info. +if SPL_DM +config SPL_DM_SPI + bool "Support SPI DM drivers in SPL" + help + Enable support for SPI DM drivers in SPL. + +endif if SPL_UBI config SPL_UBI_LOAD_BY_VOLNAME bool "Support loading volumes by name"
Signature · 1 line
2.11.0
PATCH 1/1 spl: Introduce SPL_DM_SPI Kconfig define
Dear Tom,
Quoted 6 lines
This define indicates if
DM_SPIshall be supported in SPL. This allows proper operation of DM converted SPI drivers in SPL, which use #if !CONFIG_IS_ENABLED(DM_SPI) to also support not yet DM/DTS converted boards.Signed-off-by Lukasz Majewski <[email protected]>
Tom, are there any issues preventing this patch from being applied to -master?
Quoted 28 lines
---
Applied on top of -master branch:
SHA1:448f11f7503995746a7b71e5e3b3a831c4651be9This patch is a first step for converting SPI #defines to
Kconfig. It was a part of "CONFIG_DM_SPI* to CONFIG_$(SPL_TPL_)DM_SPI*" patch:
https://patchwork.ozlabs.org/patch/1158141/which in spite of not introducing the apparent build breaks, was responsible for some deltas in SPL and U-Boot proper sizes (some parts of SPI code was not compiled in). To fix those board/SoC access to real HW is necessary as well as deep understanding of SPL SPI requirements.
--- common/spl/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+)common/spl/Kconfig +0
-0@@ -683,6 +683,13 @@ config SPL_UBI Enable support for loading payloads from UBI. See README.ubispl for more info.
common/spl/Kconfig config SPL_UBI · line 695
Quoted 10 lines
common/spl/Kconfig +7
-0+if SPL_DM +config SPL_DM_SPI + bool "Support SPI DM drivers in SPL" + help + Enable support for SPI DM drivers in SPL. + +endif if SPL_UBI config SPL_UBI_LOAD_BY_VOLNAME bool "Support loading volumes by name"
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191009/a643430c/attachment.sig>
PATCH 1/1 spl: Introduce SPL_DM_SPI Kconfig define
In reply to Lukasz MajewskiQuoted 6 lines · Lukasz Majewski
This define indicates if
DM_SPIshall be supported in SPL. This allows proper operation of DM converted SPI drivers in SPL, which use #if !CONFIG_IS_ENABLED(DM_SPI) to also support not yet DM/DTS converted boards.Signed-off-by Lukasz Majewski <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191012/ce2a07d3/attachment.sig>