toradex: imx: add update_uboot wrapper
cover toradex: imx: add update_uboot wrapper
This patch series introduces universtal update_uboot wrapper that helps to update U-Boot image on internal storage.
Example of usage:
Quoted 4 lines
tftpboot ${loadaddr} ${board_name}/u-boot.img
runupdate_uboot
tftpboot ${loadaddr} ${board_name}/SPL
runupdate_spl
Igor Opaniuk (5):
colibri_imx7: add update_uboot wrapper
apalis_imx6: add update_uboot wrapper
colibri_imx6: add update_uboot wrapper
colibri-imx6ull: add update_uboot wrapper
colibri_vf: add update_uboot wrapper
include/configs/apalis_imx6.h | 12 ++++++++++++ include/configs/colibri-imx6ull.h | 8 ++++++++ include/configs/colibri_imx6.h | 12 ++++++++++++ include/configs/colibri_imx7.h | 18 ++++++++++++++++++ include/configs/colibri_vf.h | 6 ++++++ 5 files changed, 56 insertions(+)
Signature · 1 line
2.17.1
PATCH 1/5 colibri_imx7: add update_uboot wrapper
From: Igor Opaniuk <[email protected]>
Add universal update_uboot wrapper that helps to update U-Boot image on internal storage.
Usage example:
Quoted 2 lines
tftpboot ${loadaddr} ${board_name}/u-boot-dtb.imx
runupdate_uboot
---
include/configs/colibri_imx7.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
include/configs/colibri_imx7.h +18 -0
@@ -43,6 +43,23 @@#define CONFIG_NETMASK 255.255.255.0#define CONFIG_SERVERIP 192.168.10.1 +#if defined(CONFIG_TARGET_COLIBRI_IMX7_EMMC ) +#define UBOOT_UPDATE \ + "uboot_hwpart=1\0" \ + "uboot_blk=2\0" \ + "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ + "setexpr blkcnt ${blkcnt} / 0x200\0" \ + "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ + "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" +#elif defined(CONFIG_TARGET_COLIBRI_IMX7_NAND ) +#define UBOOT_UPDATE \ + "uboot_hwpart=1\0" \ + "update_uboot=nand erase.part u-boot1 && " \ + "nand write ${loadaddr} u-boot1 ${filesize} && " \ + "nand erase.part u-boot2 && " \ + "nand write ${loadaddr} u-boot2 ${filesize}\0" +#endif +#ifndef PARTS_DEFAULT /* Define the default GPT table for eMMC */ #define PARTS_DEFAULT \
@@ -163,6 +180,7 @@MEM_LAYOUT_ENV_SETTINGS \ NFS_BOOTCMD \MODULE_EXTRA_ENV_SETTINGS \ + UBOOT_UPDATE \"boot_file=zImage\0" \"console=ttymxc0\0" \"defargs=\0" \
Signature · 1 line
2.17.1
PATCH 2/5 apalis_imx6: add update_uboot wrapper
In reply to Igor OpaniukFrom: Igor Opaniuk <[email protected]>
Add universal update_uboot wrapper that helps to update U-Boot image on internal storage.
Usage example:
Quoted 4 lines
tftpboot ${loadaddr} ${board_name}/u-boot.img
runupdate_uboot
tftpboot ${loadaddr} ${board_name}/SPL
runupdate_spl
---
include/configs/apalis_imx6.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)
include/configs/apalis_imx6.h +12 -0
@@ -121,6 +121,17 @@"imx6q-apalis-eval.dtb fat 0 1;" \ "imx6q-apalis-cam-eval.dtb fat 0 1" +#define UBOOT_UPDATE \ + "uboot_hwpart=1\0" \ + "uboot_blk=8a\0" \ + "uboot_spl_blk=2\0" \ + "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ + "setexpr blkcnt ${blkcnt} / 0x200\0" \ + "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ + "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \ + "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ + "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0" +#define EMMC_BOOTCMD \ "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \ "ro,noatime rootfstype=ext4 rootwait\0" \
@@ -178,6 +189,7 @@"fdt_fixup=;\0" \MEM_LAYOUT_ENV_SETTINGS \NFS_BOOTCMD \ +UBOOT_UPDATE \"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \"flash_eth.img && source ${loadaddr}\0" \
Signature · 1 line
2.17.1
PATCH 3/5 colibri_imx6: add update_uboot wrapper
In reply to Igor OpaniukFrom: Igor Opaniuk <[email protected]>
Add universal update_uboot wrapper that helps to update U-Boot image on internal storage.
Quoted 4 lines
tftpboot ${loadaddr} ${board_name}/u-boot.img
runupdate_uboot
tftpboot ${loadaddr} ${board_name}/SPL
runupdate_spl
---
include/configs/colibri_imx6.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)
include/configs/colibri_imx6.h +12 -0
@@ -110,6 +110,17 @@"imx6dl-colibri-eval-v3.dtb fat 0 1;" \ "imx6dl-colibri-cam-eval-v3.dtb fat 0 1" +#define UBOOT_UPDATE \ + "uboot_hwpart=1\0" \ + "uboot_blk=8a\0" \ + "uboot_spl_blk=2\0" \ + "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ + "setexpr blkcnt ${blkcnt} / 0x200\0" \ + "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ + "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \ + "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ + "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0" +#define EMMC_BOOTCMD \ "set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} "\ "rw,noatime rootfstype=ext4 " \
@@ -163,6 +174,7 @@"fdt_fixup=;\0" \MEM_LAYOUT_ENV_SETTINGS \NFS_BOOTCMD \ +UBOOT_UPDATE \"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \"flash_eth.img && source ${loadaddr}\0" \
Signature · 1 line
2.17.1
PATCH 3/5 colibri_imx6: add update_uboot wrapper
Hi Igor,
Quoted 27 lines
From: Igor Opaniuk <[email protected]>
Add universal
update_ubootwrapper that helps to update U-Boot image on internal storage.Quoted 4 lines
tftpboot ${loadaddr} ${board_name}/u-boot.img
runupdate_uboot
tftpboot ${loadaddr} ${board_name}/SPL
runupdate_splSigned-off-by Igor Opaniuk <[email protected]>---
include/configs/colibri_imx6.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)(quoted diff) +0
-0
b/include/configs/colibri_imx6.hindex95b5a14b59..750463ef47100644include/configs/colibri_imx6.h +3
-0@@ -110,6 +110,17 @@"imx6dl-colibri-eval-v3.dtb fat 0 1;" \"imx6dl-colibri-cam-eval-v3.dtb fat 0 1" +#define UBOOT_UPDATE \ +"uboot_hwpart=1\0" \ +"uboot_blk=8a\0" \
include/configs/colibri_imx6.h line 125
Quoted 10 lines
include/configs/colibri_imx6.h +8
-0+"uboot_spl_blk=2\0" \ +"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ +"setexpr blkcnt ${blkcnt} / 0x200\0" \ +"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ +"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \ +"update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ +"mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0" +
Do you see any chance to make this code common and being re-usable by other imx6 devices?
include/configs/colibri_imx6.h line 180
Quoted 11 lines
include/configs/colibri_imx6.h +0
-0#define EMMC_BOOTCMD \include/configs/colibri_imx6.h +1
-0"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \"rw,noatime rootfstype=ext4 " \@@ -163,6 +174,7 @@"fdt_fixup=;\0" \MEM_LAYOUT_ENV_SETTINGS \NFS_BOOTCMD \ +UBOOT_UPDATE \ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ "flash_eth.img && source ${loadaddr}\0" \
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191204/7cd9cffc/attachment.sig>
PATCH 3/5 colibri_imx6: add update_uboot wrapper
Hi Lukasz,
Quoted 27 lines · Lukasz Majewski
Hi Igor,
Quoted 24 lines
From: Igor Opaniuk <[email protected]>
Add universal
update_ubootwrapper that helps to update U-Boot image on internal storage.Quoted 4 lines
tftpboot ${loadaddr} ${board_name}/u-boot.img
runupdate_uboot
tftpboot ${loadaddr} ${board_name}/SPL
runupdate_splSigned-off-by Igor Opaniuk <[email protected]>---
include/configs/colibri_imx6.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)(quoted diff) +0
-0
b/include/configs/colibri_imx6.hindex95b5a14b59..750463ef47100644include/configs/colibri_imx6.h +0
-0@@ -110,6 +110,17 @@"imx6dl-colibri-eval-v3.dtb fat 0 1;" \"imx6dl-colibri-cam-eval-v3.dtb fat 0 1"
Quoted 16 lines
include/configs/colibri_imx6.h line 123
Quoted 13 lines
include/configs/colibri_imx6.h +11
-0+#define UBOOT_UPDATE \ + "uboot_hwpart=1\0" \ + "uboot_blk=8a\0" \ + "uboot_spl_blk=2\0" \ + "set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \ + "setexpr blkcnt ${blkcnt} / 0x200\0" \ + "update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} &&" \ + "mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \ + "update_spl=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \ + "mmc write ${loadaddr} ${uboot_spl_blk} ${blkcnt}\0" +Do you see any chance to make this code common and being re-usable by other imx6 devices?
Not sure, because:
1. Some platforms use "user" hw partition instead of boot0 for storing SPL/U-boot proper (AFAIK this is actual for i.MX6Q Sabre) IMHO, for this case it's much more convenient to use DFU/UMS/Fastboot (which is not possible for boot0/boot1) for flashing instead of some wrapper like this.
2. I don't have any mx6-based boards other than from Toradex, so at least I won't be
able to test it.
If you insist, I can add "update_uboot" to the common include, but to be honest I really doubt that someone will use it :)
Quoted 18 lines
include/configs/colibri_imx6.h line 180
Quoted 12 lines
include/configs/colibri_imx6.h +0
-0#define EMMC_BOOTCMD \"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} "\ "rw,noatime rootfstype=ext4 " \include/configs/colibri_imx6.h +1
-0@@ -163,6 +174,7 @@"fdt_fixup=;\0" \MEM_LAYOUT_ENV_SETTINGS \NFS_BOOTCMD \ +UBOOT_UPDATE \ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ "flash_eth.img && source ${loadaddr}\0" \Best regards,
Quoted 7 lines
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
Thanks
--
Best regards - Freundliche Grüsse - Meilleures salutations
Igor Opaniuk
mailto: igor.opaniuk at gmail.com
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk
PATCH 4/5 colibri-imx6ull: add update_uboot wrapper
In reply to Igor OpaniukFrom: Igor Opaniuk <[email protected]>
Add universal update_uboot wrapper that helps to update U-Boot image on internal storage.
Usage example:
Quoted 2 lines
tftpboot ${loadaddr} ${board_name}/u-boot-nand.imx run
update_uboot
---
include/configs/colibri-imx6ull.h | 8 ++++++++ 1 file changed, 8 insertions(+)
include/configs/colibri-imx6ull.h +8 -0
@@ -47,6 +47,13 @@"ramdisk_addr_r=0x82200000\0" \ "scriptaddr=0x87000000\0" +#define UBOOT_UPDATE \ + "uboot_hwpart=1\0" \ + "update_uboot=nand erase.part u-boot1 && " \ + "nand write ${loadaddr} u-boot1 ${filesize} && " \ + "nand erase.part u-boot2 && " \ + "nand write ${loadaddr} u-boot2 ${filesize}\0" +#define NFS_BOOTCMD \ "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ "nfsboot=run setup; " \
@@ -83,6 +90,7 @@MEM_LAYOUT_ENV_SETTINGS \ NFS_BOOTCMD \UBI_BOOTCMD \ + UBOOT_UPDATE \"console=ttymxc0\0" \"defargs=user_debug=30\0" \"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
Signature · 1 line
2.17.1
PATCH 5/5 colibri_vf: add update_uboot wrapper
In reply to Igor OpaniukFrom: Igor Opaniuk <[email protected]>
Add universal update_uboot wrapper that helps to update U-Boot image on internal storage.
Usage example:
Quoted 2 lines
tftpboot ${loadaddr} ${board_name}/u-boot-nand.imx run
update_uboot
---
include/configs/colibri_vf.h | 6 ++++++ 1 file changed, 6 insertions(+)
include/configs/colibri_vf.h +6 -0
@@ -58,6 +58,11 @@"ramdisk_addr_r=0x82100000\0" \ "scriptaddr=0x87000000\0" +#define UBOOT_UPDATE \ + "uboot_hwpart=1\0" \ + "update_uboot=nand erase.part u-boot && " \ + "nand write ${loadaddr} u-boot ${filesize}\0" \ +#define NFS_BOOTCMD \ "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ "nfsboot=run setup; " \
@@ -112,6 +117,7 @@NFS_BOOTCMD \ SD_BOOTCMD \UBI_BOOTCMD \ + UBOOT_UPDATE \"console=ttyLP0\0" \"defargs=user_debug=30\0" \"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
Signature · 1 line
2.17.1