Skip to contentSkip to conversation

powerpc: Replace setup_irq() by request_irq()

PATCH Superseded afzal mohammed 3 participants 5 messages Mar 4, 2020 – Mar 26, 2020

Subsystems (4)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 powerpc: Replace setup_irq() by request_irq()

request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

---
Hi powerpc maintainers,

if okay w/ this change, please consider taking it thr' your tree, else please let me know.

Regards
afzal

Link to v2 & v1,
[v2] https://lkml.kernel.org/r/[email protected]
[v1] https://lkml.kernel.org/r/[email protected]

v3:
* Split out from tree wide series, as Thomas suggested to get it thr' respective maintainers
* Modify pr_err displayed in case of error
* Re-arrange code & choose pr_err args as required to improve readability
* Remove irrelevant parts from commit message & improve

v2:
* Replace pr_err("request_irq() on %s failed" by

           pr_err("%s: request_irq() failed"

* Commit message massage

 arch/powerpc/platforms/85xx/mpc85xx_cds.c | 10 +++-----
 arch/powerpc/platforms/8xx/cpm1.c         |  9 ++-----
 arch/powerpc/platforms/8xx/m8xx_setup.c   |  9 ++-----
 arch/powerpc/platforms/chrp/setup.c       | 14 ++++-------
 arch/powerpc/platforms/powermac/pic.c     | 29 +++++++++--------------
 arch/powerpc/platforms/powermac/smp.c     | 12 ++++------
 6 files changed, 28 insertions(+), 55 deletions(-)
arch/powerpc/platforms/85xx/mpc85xx_cds.c +3 -7
index 6b1436abe9b1..1c5598877d70 100644
@@ -218,12 +218,6 @@ static irqreturn_t mpc85xx_8259_cascade_action(int irq, void *dev_id)
 {
 	return IRQ_HANDLED;
 }
-
-static struct irqaction mpc85xxcds_8259_irqaction = {
-	.handler = mpc85xx_8259_cascade_action,
-	.flags = IRQF_SHARED | IRQF_NO_THREAD,
-	.name = "8259 cascade",
-};
 #endif /* PPC_I8259 */
 #endif /* CONFIG_PCI */
 
@@ -271,7 +265,9 @@ static int mpc85xx_cds_8259_attach(void)
 	 *  disabled when the last user of the shared IRQ line frees their
 	 *  interrupt.
 	 */
-	if ((ret = setup_irq(cascade_irq, &mpc85xxcds_8259_irqaction))) {
+	ret = request_irq(cascade_irq, mpc85xx_8259_cascade_action,
+			  IRQF_SHARED | IRQF_NO_THREAD, "8259 cascade", NULL);
+	if (ret) {
 		printk(KERN_ERR "Failed to setup cascade interrupt\n");
 		return ret;
 	}
arch/powerpc/platforms/8xx/cpm1.c +2 -7
index a43ee7d1ff85..4db4ca2e1222 100644
@@ -120,12 +120,6 @@ static irqreturn_t cpm_error_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction cpm_error_irqaction = {
-	.handler = cpm_error_interrupt,
-	.flags = IRQF_NO_THREAD,
-	.name = "error",
-};
-
 static const struct irq_domain_ops cpm_pic_host_ops = {
 	.map = cpm_pic_host_map,
 };
@@ -187,7 +181,8 @@ unsigned int __init cpm_pic_init(void)
 	if (!eirq)
 		goto end;
 
-	if (setup_irq(eirq, &cpm_error_irqaction))
+	if (request_irq(eirq, cpm_error_interrupt, IRQF_NO_THREAD, "error",
+			NULL))
 		printk(KERN_ERR "Could not allocate CPM error IRQ!");
 
 	setbits32(&cpic_reg->cpic_cicr, CICR_IEN);
arch/powerpc/platforms/8xx/m8xx_setup.c +2 -7
index f1c805c8adbc..df4d57d07f9a 100644
@@ -39,12 +39,6 @@ static irqreturn_t timebase_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction tbint_irqaction = {
-	.handler = timebase_interrupt,
-	.flags = IRQF_NO_THREAD,
-	.name = "tbint",
-};
-
 /* per-board overridable init_internal_rtc() function. */
 void __init __attribute__ ((weak))
 init_internal_rtc(void)
@@ -157,7 +151,8 @@ void __init mpc8xx_calibrate_decr(void)
 					(TBSCR_TBF | TBSCR_TBE));
 	immr_unmap(sys_tmr2);
 
-	if (setup_irq(virq, &tbint_irqaction))
+	if (request_irq(virq, timebase_interrupt, IRQF_NO_THREAD, "tbint",
+			NULL))
 		panic("Could not allocate timer IRQ!");
 }
 
arch/powerpc/platforms/chrp/setup.c +5 -9
index fcf6f2342ef4..8328cd5817b0 100644
@@ -451,13 +451,6 @@ static void __init chrp_find_openpic(void)
 	of_node_put(np);
 }
 
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
-static struct irqaction xmon_irqaction = {
-	.handler = xmon_irq,
-	.name = "XMON break",
-};
-#endif
-
 static void __init chrp_find_8259(void)
 {
 	struct device_node *np, *pic = NULL;
@@ -541,8 +534,11 @@ static void __init chrp_init_IRQ(void)
 		if (of_node_is_type(kbd->parent, "adb"))
 			break;
 	of_node_put(kbd);
-	if (kbd)
-		setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
+	if (kbd) {
+		if (request_irq(HYDRA_INT_ADB_NMI, xmon_irq, 0, "XMON break",
+				NULL))
+			pr_err("Failed to register XMON break interrupt\n");
+	}
 #endif
 }
 
arch/powerpc/platforms/powermac/pic.c +11 -18
index 2e969073473d..4921bccf0376 100644
@@ -250,20 +250,6 @@ static unsigned int pmac_pic_get_irq(void)
 	return irq_linear_revmap(pmac_pic_host, irq);
 }
 
-#ifdef CONFIG_XMON
-static struct irqaction xmon_action = {
-	.handler	= xmon_irq,
-	.flags		= IRQF_NO_THREAD,
-	.name		= "NMI - XMON"
-};
-#endif
-
-static struct irqaction gatwick_cascade_action = {
-	.handler	= gatwick_action,
-	.flags		= IRQF_NO_THREAD,
-	.name		= "cascade",
-};
-
 static int pmac_pic_host_match(struct irq_domain *h, struct device_node *node,
 			       enum irq_domain_bus_token bus_token)
 {
@@ -384,12 +370,17 @@ static void __init pmac_pic_probe_oldstyle(void)
 		out_le32(&pmac_irq_hw[i]->enable, 0);
 
 	/* Hookup cascade irq */
-	if (slave && pmac_irq_cascade)
-		setup_irq(pmac_irq_cascade, &gatwick_cascade_action);
+	if (slave && pmac_irq_cascade) {
+		if (request_irq(pmac_irq_cascade, gatwick_action,
+				IRQF_NO_THREAD, "cascade", NULL))
+			pr_err("Failed to register cascade interrupt\n");
+	}
 
 	printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
 #ifdef CONFIG_XMON
-	setup_irq(irq_create_mapping(NULL, 20), &xmon_action);
+	i = irq_create_mapping(NULL, 20);
+	if (request_irq(i, xmon_irq, IRQF_NO_THREAD, "NMI - XMON", NULL))
+		pr_err("Failed to register NMI-XMON interrupt\n");
 #endif
 }
 
@@ -441,7 +432,9 @@ static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
 		nmi_irq = irq_of_parse_and_map(pswitch, 0);
 		if (nmi_irq) {
 			mpic_irq_set_priority(nmi_irq, 9);
-			setup_irq(nmi_irq, &xmon_action);
+			if (request_irq(nmi_irq, xmon_irq, IRQF_NO_THREAD,
+					"NMI - XMON", NULL))
+				pr_err("Failed to register NMI-XMON interrupt\n");
 		}
 		of_node_put(pswitch);
 	}
arch/powerpc/platforms/powermac/smp.c +5 -7
index f95fbdee6efe..c55bf474ed4e 100644
@@ -399,21 +399,19 @@ static int __init smp_psurge_kick_cpu(int nr)
 	return 0;
 }
 
-static struct irqaction psurge_irqaction = {
-	.handler = psurge_ipi_intr,
-	.flags = IRQF_PERCPU | IRQF_NO_THREAD,
-	.name = "primary IPI",
-};
-
 static void __init smp_psurge_setup_cpu(int cpu_nr)
 {
+	unsigned long flags = IRQF_PERCPU | IRQF_NO_THREAD;
+	int irq;
+
 	if (cpu_nr != 0 || !psurge_start)
 		return;
 
 	/* reset the entry point so if we get another intr we won't
 	 * try to startup again */
 	out_be32(psurge_start, 0x100);
-	if (setup_irq(irq_create_mapping(NULL, 30), &psurge_irqaction))
+	irq = irq_create_mapping(NULL, 30);
+	if (request_irq(irq, psurge_ipi_intr, flags, "primary IPI", NULL))
 		printk(KERN_ERR "Couldn't get primary IPI interrupt");
 }
 
Signature · 1 line
2.25.1
#1 lore raw

PATCH v4 1/1 powerpc: Replace setup_irq() by request_irq()

request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

---

v4:
* pass non-NULL dev_id while requesting shared irq in mpc85xx_cds.c, as

	request_irq() can fail due to sanity check, which is not done in
	setup_irq()

v3:
* Split out from tree wide series, as Thomas suggested to get it thr' respective maintainers
* Modify pr_err displayed in case of error
* Re-arrange code & choose pr_err args as required to improve readability
* Remove irrelevant parts from commit message & improve

v2:
* Replace pr_err("request_irq() on %s failed" by

           pr_err("%s: request_irq() failed"

* Commit message massage

 arch/powerpc/platforms/85xx/mpc85xx_cds.c | 11 ++++-----
 arch/powerpc/platforms/8xx/cpm1.c         |  9 ++-----
 arch/powerpc/platforms/8xx/m8xx_setup.c   |  9 ++-----
 arch/powerpc/platforms/chrp/setup.c       | 14 ++++-------
 arch/powerpc/platforms/powermac/pic.c     | 29 +++++++++--------------
 arch/powerpc/platforms/powermac/smp.c     | 12 ++++------
 6 files changed, 29 insertions(+), 55 deletions(-)
arch/powerpc/platforms/85xx/mpc85xx_cds.c +4 -7
index 6b1436abe9b1..915ab6710b93 100644
@@ -218,12 +218,6 @@ static irqreturn_t mpc85xx_8259_cascade_action(int irq, void *dev_id)
 {
 	return IRQ_HANDLED;
 }
-
-static struct irqaction mpc85xxcds_8259_irqaction = {
-	.handler = mpc85xx_8259_cascade_action,
-	.flags = IRQF_SHARED | IRQF_NO_THREAD,
-	.name = "8259 cascade",
-};
 #endif /* PPC_I8259 */
 #endif /* CONFIG_PCI */
 
@@ -271,7 +265,10 @@ static int mpc85xx_cds_8259_attach(void)
 	 *  disabled when the last user of the shared IRQ line frees their
 	 *  interrupt.
 	 */
-	if ((ret = setup_irq(cascade_irq, &mpc85xxcds_8259_irqaction))) {
+	ret = request_irq(cascade_irq, mpc85xx_8259_cascade_action,
+			  IRQF_SHARED | IRQF_NO_THREAD, "8259 cascade",
+			  cascade_node);
+	if (ret) {
 		printk(KERN_ERR "Failed to setup cascade interrupt\n");
 		return ret;
 	}
arch/powerpc/platforms/8xx/cpm1.c +2 -7
index a43ee7d1ff85..4db4ca2e1222 100644
@@ -120,12 +120,6 @@ static irqreturn_t cpm_error_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction cpm_error_irqaction = {
-	.handler = cpm_error_interrupt,
-	.flags = IRQF_NO_THREAD,
-	.name = "error",
-};
-
 static const struct irq_domain_ops cpm_pic_host_ops = {
 	.map = cpm_pic_host_map,
 };
@@ -187,7 +181,8 @@ unsigned int __init cpm_pic_init(void)
 	if (!eirq)
 		goto end;
 
-	if (setup_irq(eirq, &cpm_error_irqaction))
+	if (request_irq(eirq, cpm_error_interrupt, IRQF_NO_THREAD, "error",
+			NULL))
 		printk(KERN_ERR "Could not allocate CPM error IRQ!");
 
 	setbits32(&cpic_reg->cpic_cicr, CICR_IEN);
arch/powerpc/platforms/8xx/m8xx_setup.c +2 -7
index f1c805c8adbc..df4d57d07f9a 100644
@@ -39,12 +39,6 @@ static irqreturn_t timebase_interrupt(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction tbint_irqaction = {
-	.handler = timebase_interrupt,
-	.flags = IRQF_NO_THREAD,
-	.name = "tbint",
-};
-
 /* per-board overridable init_internal_rtc() function. */
 void __init __attribute__ ((weak))
 init_internal_rtc(void)
@@ -157,7 +151,8 @@ void __init mpc8xx_calibrate_decr(void)
 					(TBSCR_TBF | TBSCR_TBE));
 	immr_unmap(sys_tmr2);
 
-	if (setup_irq(virq, &tbint_irqaction))
+	if (request_irq(virq, timebase_interrupt, IRQF_NO_THREAD, "tbint",
+			NULL))
 		panic("Could not allocate timer IRQ!");
 }
 
arch/powerpc/platforms/chrp/setup.c +5 -9
index fcf6f2342ef4..8328cd5817b0 100644
@@ -451,13 +451,6 @@ static void __init chrp_find_openpic(void)
 	of_node_put(np);
 }
 
-#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
-static struct irqaction xmon_irqaction = {
-	.handler = xmon_irq,
-	.name = "XMON break",
-};
-#endif
-
 static void __init chrp_find_8259(void)
 {
 	struct device_node *np, *pic = NULL;
@@ -541,8 +534,11 @@ static void __init chrp_init_IRQ(void)
 		if (of_node_is_type(kbd->parent, "adb"))
 			break;
 	of_node_put(kbd);
-	if (kbd)
-		setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
+	if (kbd) {
+		if (request_irq(HYDRA_INT_ADB_NMI, xmon_irq, 0, "XMON break",
+				NULL))
+			pr_err("Failed to register XMON break interrupt\n");
+	}
 #endif
 }
 
arch/powerpc/platforms/powermac/pic.c +11 -18
index 2e969073473d..4921bccf0376 100644
@@ -250,20 +250,6 @@ static unsigned int pmac_pic_get_irq(void)
 	return irq_linear_revmap(pmac_pic_host, irq);
 }
 
-#ifdef CONFIG_XMON
-static struct irqaction xmon_action = {
-	.handler	= xmon_irq,
-	.flags		= IRQF_NO_THREAD,
-	.name		= "NMI - XMON"
-};
-#endif
-
-static struct irqaction gatwick_cascade_action = {
-	.handler	= gatwick_action,
-	.flags		= IRQF_NO_THREAD,
-	.name		= "cascade",
-};
-
 static int pmac_pic_host_match(struct irq_domain *h, struct device_node *node,
 			       enum irq_domain_bus_token bus_token)
 {
@@ -384,12 +370,17 @@ static void __init pmac_pic_probe_oldstyle(void)
 		out_le32(&pmac_irq_hw[i]->enable, 0);
 
 	/* Hookup cascade irq */
-	if (slave && pmac_irq_cascade)
-		setup_irq(pmac_irq_cascade, &gatwick_cascade_action);
+	if (slave && pmac_irq_cascade) {
+		if (request_irq(pmac_irq_cascade, gatwick_action,
+				IRQF_NO_THREAD, "cascade", NULL))
+			pr_err("Failed to register cascade interrupt\n");
+	}
 
 	printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
 #ifdef CONFIG_XMON
-	setup_irq(irq_create_mapping(NULL, 20), &xmon_action);
+	i = irq_create_mapping(NULL, 20);
+	if (request_irq(i, xmon_irq, IRQF_NO_THREAD, "NMI - XMON", NULL))
+		pr_err("Failed to register NMI-XMON interrupt\n");
 #endif
 }
 
@@ -441,7 +432,9 @@ static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
 		nmi_irq = irq_of_parse_and_map(pswitch, 0);
 		if (nmi_irq) {
 			mpic_irq_set_priority(nmi_irq, 9);
-			setup_irq(nmi_irq, &xmon_action);
+			if (request_irq(nmi_irq, xmon_irq, IRQF_NO_THREAD,
+					"NMI - XMON", NULL))
+				pr_err("Failed to register NMI-XMON interrupt\n");
 		}
 		of_node_put(pswitch);
 	}
arch/powerpc/platforms/powermac/smp.c +5 -7
index f95fbdee6efe..c55bf474ed4e 100644
@@ -399,21 +399,19 @@ static int __init smp_psurge_kick_cpu(int nr)
 	return 0;
 }
 
-static struct irqaction psurge_irqaction = {
-	.handler = psurge_ipi_intr,
-	.flags = IRQF_PERCPU | IRQF_NO_THREAD,
-	.name = "primary IPI",
-};
-
 static void __init smp_psurge_setup_cpu(int cpu_nr)
 {
+	unsigned long flags = IRQF_PERCPU | IRQF_NO_THREAD;
+	int irq;
+
 	if (cpu_nr != 0 || !psurge_start)
 		return;
 
 	/* reset the entry point so if we get another intr we won't
 	 * try to startup again */
 	out_be32(psurge_start, 0x100);
-	if (setup_irq(irq_create_mapping(NULL, 30), &psurge_irqaction))
+	irq = irq_create_mapping(NULL, 30);
+	if (request_irq(irq, psurge_ipi_intr, flags, "primary IPI", NULL))
 		printk(KERN_ERR "Couldn't get primary IPI interrupt");
 }
 
Signature · 1 line
2.18.0
#2 lore raw

Hi Michael Ellerman,

Quoted 11 lines · afzal mohammed

request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

This patch is seen in next-test branch for last 4-5 days, i don't know exactly how powerpc workflow happens, so a question - this would be appear in linux-next soon right ? (for last 4-5 days i had been daily checking -next, but not appearing there).

Sorry for the query for this trivial patch, i am asking because Thomas had mentioned [1] to get setup_irq() cleanup thr' respective maintainers (earlier it was part of tree-wide series), check -next after -rc6 & resubmit ignored ones to him, this patch is neither in -next, neither ignored, so i am at a loss what to do :(

And i would prefer to let each patch go thr' respective maintainers so that only least patches has to be sent to Thomas. Bigger problem is that core removal patch of setup_irq() can be sent to him only after making sure that it's tree-wide usage has been removed.

Regards
afzal

[1] https://lkml.kernel.org/r/[email protected]

#3 lore raw
Quoted 10 lines · afzal mohammed

Hi Michael Ellerman,

Quoted 8 lines · afzal mohammed

request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

Quoted 8 lines
Quoted 3 lines

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

This patch is seen in next-test branch for last 4-5 days, i don't know exactly how powerpc workflow happens, so a question - this would be appear in linux-next soon right ? (for last 4-5 days i had been daily checking -next, but not appearing there).

Yeah it will appear in next "soon".

It's been stuck behind a big series that has hit some bugs during testing, so that has delayed me pushing the whole branch.

Quoted 5 lines

Sorry for the query for this trivial patch, i am asking because Thomas had mentioned [1] to get setup_irq() cleanup thr' respective maintainers (earlier it was part of tree-wide series), check -next after -rc6 & resubmit ignored ones to him, this patch is neither in -next, neither ignored, so i am at a loss what to do :(

That's OK. I will take this one, you can stop worrying about it.

It should appear in next tomorrow or Friday.

cheers

#4 lore raw
In reply to afzal mohammed
Quoted 11 lines · afzal mohammed

request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Applied to powerpc next, thanks.

https://git.kernel.org/powerpc/c/b4f00d5b2098320a0d4c4a6d31099bc0c9a85b02

cheers