thermal: k3: Add support for bandgap sensors
Subsystems (3)
v5 cover thermal: k3: Add support for bandgap sensors
Add VTM thermal support. In the Voltage Thermal
Management Module(VTM), K3 AM654 supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Add support for bandgap sensors. Currently reading temperatures is supported.
Changes in v5:
* Removed thermal work function which was unused.
* Removed unused preve_tenmp and a couple more struct variables.
* Removed couple of redundant header function include.
Changes in v4:
* Fixed comments from Daniel to remove trend function.
* Mostly cleaned up all the unused variables.
* Driver from bool to tristate.
Changes in v3:
* Fixed errors seen with:
dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
Changes in v2:
* Fixed yaml errors
* renamed am654-industrial-thermal.dtsi to k3-am654-industrial-thermal.dtsi to follow the convention for k3 family.
Keerthy (4):
dt-bindings: thermal: k3: Add VTM bindings documentation
thermal: k3: Add support for bandgap sensors
arm64: dts: ti: am654: Add thermal zones
arm64: dts: ti: am6: Add VTM node
.../bindings/thermal/ti,am654-thermal.yaml | 56 ++++ arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 11 + .../dts/ti/k3-am654-industrial-thermal.dtsi | 45 +++ drivers/thermal/Kconfig | 10 + drivers/thermal/Makefile | 1 + drivers/thermal/k3_bandgap.c | 268 ++++++++++++++++++ 6 files changed, 391 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi create mode 100644 drivers/thermal/k3_bandgap.c
Signature · 1 line
2.17.1
PATCH v5 1/4 dt-bindings: thermal: k3: Add VTM bindings documentation
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 AM654 supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
---
Changes in v5:
* Added Reviewed-by: Rob Herring <[email protected]>
.../bindings/thermal/ti,am654-thermal.yaml | 56 +++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml new file +56 -0
@@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments AM654 VTM (DTS) binding + +maintainers: + - Keerthy <[email protected]> + +properties: + compatible: + const: ti,am654-vtm + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - "#thermal-sensor-cells" + - compatible + - reg + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + vtm: thermal@42050000 { + compatible = "ti,am654-vtm"; + reg = <0x0 0x42050000 0x0 0x25c>; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + mpu0_thermal: mpu0_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&vtm0 0>; + + trips { + mpu0_crit: mpu0_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +...
Signature · 1 line
2.17.1
Re: [PATCH v5 1/4] dt-bindings: thermal: k3: Add VTM bindings documentation
Quoted 48 lines · Keerthy
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 AM654 supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Signed-off-by Keerthy <[email protected]>Reviewed-by Rob Herring <[email protected]>---
Changes in v5:
* Added Reviewed-by: Rob Herring <[email protected]>
.../bindings/thermal/ti,am654-thermal.yaml | 56 +++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yamlDocumentation/devicetree/bindings/thermal/ti,am654-thermal.yaml new file +20
-0@@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments AM654 VTM (DTS) binding + +maintainers: + - Keerthy <[email protected]> + +properties: + compatible: + const: ti,am654-vtm + + reg: + maxItems: 1 + + power-domains: + maxItems: 1
Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml line 30
Quoted 10 lines
Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml new file +10
-0+ + "#thermal-sensor-cells": + const: 1 + +required: + - "#thermal-sensor-cells" + - compatible + - reg + - power-domains +
A nit-pick: arrange the required properties in order they're listed above.
Quoted 29 lines
Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml new file +26
-1+additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + vtm: thermal@42050000 { + compatible = "ti,am654-vtm"; + reg = <0x0 0x42050000 0x0 0x25c>; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + mpu0_thermal: mpu0_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&vtm0 0>; + + trips { + mpu0_crit: mpu0_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +... --2.17.1
PATCH v5 2/4 thermal: k3: Add support for bandgap sensors
In reply to KeerthyThe bandgap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures only is supported. There are no active/passive cooling agent supported.
---
Changes in v5:
* Removed thermal work function which was unused.
* Removed unused preve_tenmp and a couple more struct variables.
* Removed couple of redundant header function include.
drivers/thermal/Kconfig | 10 ++ drivers/thermal/Makefile | 1 + drivers/thermal/k3_bandgap.c | 268 +++++++++++++++++++++++++++++++++++ 3 files changed, 279 insertions(+) create mode 100644 drivers/thermal/k3_bandgap.c
drivers/thermal/Kconfig +10 -0
@@ -251,6 +251,16 @@ config IMX_THERMAL cpufreq is used as the cooling device to throttle CPUs when the passive trip is crossed. +config K3_THERMAL + tristate "Texas Instruments K3 thermal support" + depends on ARCH_K3 || COMPILE_TEST + help + If you say yes here you get thermal support for the Texas Instruments + K3 SoC family. The current chip supported is: + - AM654 + + This includes temperature reading functionality. + config MAX77620_THERMAL tristate "Temperature sensor driver for Maxim MAX77620 PMIC" depends on MFD_MAX77620
drivers/thermal/Makefile +1 -0
@@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o +obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.o
drivers/thermal/k3_bandgap.c new file +268 -0
268 lines not on this page · raw message
Signature · 1 line
2.17.1
Quoted 7 lines · Keerthy
The bandgap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures only is supported. There are no active/passive cooling agent supported.
Daniel,
Let me kow if there are further comments to be addressed.
Regards,
Keerthy
Quoted 324 lines
Signed-off-by Keerthy <[email protected]>---
Changes in v5:
* Removed thermal work function which was unused.
* Removed unusedpreve_tenmpand a couple more struct variables.
* Removed couple of redundant header function include.drivers/thermal/Kconfig | 10 ++ drivers/thermal/Makefile | 1 + drivers/thermal/k3_bandgap.c | 268 +++++++++++++++++++++++++++++++++++ 3 files changed, 279 insertions(+)create mode 100644
drivers/thermal/k3_bandgap.cdrivers/thermal/Kconfig +10
-0@@ -251,6 +251,16 @@ config IMX_THERMAL cpufreq is used as the cooling device to throttle CPUs when the passive trip is crossed. +config K3_THERMAL + tristate "Texas Instruments K3 thermal support" + depends on ARCH_K3 || COMPILE_TEST + help + If you say yes here you get thermal support for the Texas Instruments + K3 SoC family. The current chip supported is: + - AM654 + + This includes temperature reading functionality. + config MAX77620_THERMAL tristate "Temperature sensor driver for Maxim MAX77620 PMIC" depends on MFD_MAX77620drivers/thermal/Makefile +1
-0@@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o +obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.odrivers/thermal/k3_bandgap.c new file +268
-0@@ -0,0 +1,268 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* TI Bandgap temperature sensor driver for K3 SoC Family +* +* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pm_runtime.h> +#include <linux/err.h> +#include <linux/types.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/thermal.h> +#include <linux/of.h> + +#define K3_VTM_DEVINFO_PWR0_OFFSET 0x4 +#define K3_VTM_DEVINFO_PWR0_CVD_CT_MASK 0xf +#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK 0xf0 +#define K3_VTM_TMPSENS0_CTRL_OFFSET 0x80 +#define K3_VTM_REGS_PER_TS 0x10 +#define K3_VTM_TS_STAT_DTEMP_MASK 0x3ff +#define K3_VTM_MAX_NUM_TS 8 +#define K3_VTM_TMPSENS_CTRL_CBIASSEL BIT(0) +#define K3_VTM_TMPSENS_CTRL_SOC BIT(5) +#define K3_VTM_TMPSENS_CTRL_CLRZ BIT(6) +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ BIT(7) + +#define K3_VTM_ADC_BEGIN_VAL 540 +#define K3_VTM_ADC_END_VAL 944 + +static const int k3_adc_to_temp[] = { +-40000 ,-40000 ,-40000 ,-40000 ,-39800 ,-39400 ,-39000 ,-38600 ,-38200 , +-37800 ,-37400 ,-37000 ,-36600 ,-36200 ,-35800 ,-35300 ,-34700 ,-34200 , +-33800 ,-33400 ,-33000 ,-32600 ,-32200 ,-31800 ,-31400 ,-31000 ,-30600 , +-30200 ,-29800 ,-29400 ,-29000 ,-28600 ,-28200 ,-27700 ,-27100 ,-26600 , +-26200 ,-25800 ,-25400 ,-25000 ,-24600 ,-24200 ,-23800 ,-23400 ,-23000 , +-22600 ,-22200 ,-21800 ,-21400 ,-21000 ,-20500 ,-19900 ,-19400 ,-19000 , +-18600 ,-18200 ,-17800 ,-17400 ,-17000 ,-16600 ,-16200 ,-15800 ,-15400 , +-15000 ,-14600 ,-14200 ,-13800 ,-13400 ,-13000 ,-12500 ,-11900 ,-11400 , +-11000 ,-10600 ,-10200 ,-9800 ,-9400 ,-9000 ,-8600 ,-8200 ,-7800 ,-7400 , +-7000 ,-6600 ,-6200 ,-5800 ,-5400 ,-5000 ,-4500 ,-3900 ,-3400 ,-3000 , +-2600 ,-2200 ,-1800 ,-1400 ,-1000 ,-600 ,-200 ,200 ,600 ,1000 ,1400 , +1800 ,2200 ,2600 ,3000 ,3400 ,3900 ,4500 ,5000 ,5400 ,5800 ,6200 ,6600 , +7000 ,7400 ,7800 ,8200 ,8600 ,9000 ,9400 ,9800 ,10200 ,10600 ,11000 , +11400 ,11800 ,12200 ,12700 ,13300 ,13800 ,14200 ,14600 ,15000 ,15400 , +15800 ,16200 ,16600 ,17000 ,17400 ,17800 ,18200 ,18600 ,19000 ,19400 , +19800 ,20200 ,20600 ,21000 ,21400 ,21900 ,22500 ,23000 ,23400 ,23800 , +24200 ,24600 ,25000 ,25400 ,25800 ,26200 ,26600 ,27000 ,27400 ,27800 , +28200 ,28600 ,29000 ,29400 ,29800 ,30200 ,30600 ,31000 ,31400 ,31900 , +32500 ,33000 ,33400 ,33800 ,34200 ,34600 ,35000 ,35400 ,35800 ,36200 , +36600 ,37000 ,37400 ,37800 ,38200 ,38600 ,39000 ,39400 ,39800 ,40200 , +40600 ,41000 ,41400 ,41800 ,42200 ,42600 ,43100 ,43700 ,44200 ,44600 , +45000 ,45400 ,45800 ,46200 ,46600 ,47000 ,47400 ,47800 ,48200 ,48600 , +49000 ,49400 ,49800 ,50200 ,50600 ,51000 ,51400 ,51800 ,52200 ,52600 , +53000 ,53400 ,53800 ,54200 ,54600 ,55000 ,55400 ,55900 ,56500 ,57000 , +57400 ,57800 ,58200 ,58600 ,59000 ,59400 ,59800 ,60200 ,60600 ,61000 , +61400 ,61800 ,62200 ,62600 ,63000 ,63400 ,63800 ,64200 ,64600 ,65000 , +65400 ,65800 ,66200 ,66600 ,67000 ,67400 ,67800 ,68200 ,68600 ,69000 , +69400 ,69800 ,70200 ,70600 ,71000 ,71500 ,72100 ,72600 ,73000 ,73400 , +73800 ,74200 ,74600 ,75000 ,75400 ,75800 ,76200 ,76600 ,77000 ,77400 , +77800 ,78200 ,78600 ,79000 ,79400 ,79800 ,80200 ,80600 ,81000 ,81400 , +81800 ,82200 ,82600 ,83000 ,83400 ,83800 ,84200 ,84600 ,85000 ,85400 , +85800 ,86200 ,86600 ,87000 ,87400 ,87800 ,88200 ,88600 ,89000 ,89400 , +89800 ,90200 ,90600 ,91000 ,91400 ,91800 ,92200 ,92600 ,93000 ,93400 , +93800 ,94200 ,94600 ,95000 ,95400 ,95800 ,96200 ,96600 ,97000 ,97500 , +98100 ,98600 ,99000 ,99400 ,99800 ,100200 ,100600 ,101000 ,101400 , +101800 ,102200 ,102600 ,103000 ,103400 ,103800 ,104200 ,104600 ,105000 , +105400 ,105800 ,106200 ,106600 ,107000 ,107400 ,107800 ,108200 ,108600 , +109000 ,109400 ,109800 ,110200 ,110600 ,111000 ,111400 ,111800 ,112200 , +112600 ,113000 ,113400 ,113800 ,114200 ,114600 ,115000 ,115400 ,115800 , +116200 ,116600 ,117000 ,117400 ,117800 ,118200 ,118600 ,119000 ,119400 , +119800 ,120200 ,120600 ,121000 ,121400 ,121800 ,122200 ,122600 ,123000 , +123400 ,123800 ,124200 ,124600 ,124900 ,125000 , +}; + +struct k3_bandgap { +void __iomem *base; +const struct k3_bandgap_data *conf; +}; + +/* common data structures */ +struct k3_thermal_data { +struct thermal_zone_device *ti_thermal; +struct k3_bandgap *bgp; +int sensor_id; +u32 ctrl_offset; +u32 stat_offset; +}; + +static unsigned int vtm_get_best_value (unsigned int s0,unsigned int s1, +unsigned int s2) +{ +int d01 =abs (s0 - s1); +int d02 =abs (s0 - s2); +int d12 =abs (s1 - s2); + +if (d01 <= d02 && d01 <= d12) +return (s0 + s1) /2 ; + +if (d02 <= d01 && d02 <= d12) +return (s0 + s2) /2 ; + +return (s1 + s2) /2 ; +} + +static int k3_bgp_read_temp (struct k3_thermal_data *devdata, +int *temp) +{ +struct k3_bandgap *bgp; +unsigned int dtemp, s0, s1, s2; + + bgp = devdata->bgp; + +/* +* Errata is applicable for am654 pg 1.0 silicon. There +* is a variation of the order for 8-10 degree centigrade. +* Work around that by getting the average of two closest +* readings out of three readings everytime we want to +* report temperatures. +* +* Errata workaround. +*/ + s0 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s1 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s2 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + dtemp =vtm_get_best_value (s0, s1, s2); + +if (dtemp <K3_VTM_ADC_BEGIN_VAL || dtemp >K3_VTM_ADC_END_VAL ) +return -EINVAL ; + + *temp = k3_adc_to_temp[dtemp -K3_VTM_ADC_BEGIN_VAL ]; + +return 0 ; +} + +static int k3_thermal_get_temp (void *devdata,int *temp) +{ +struct k3_thermal_data *data = devdata; +int ret =0 ; + + ret =k3_bgp_read_temp (data, temp); +if (ret) +return ret; + +return ret; +} + +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = { + .get_temp = k3_thermal_get_temp, +}; + +static const struct of_device_id of_k3_bandgap_match[]; + +static int k3_bandgap_probe (struct platform_device *pdev) +{ +int ret =0 , cnt, val, id, reg_cnt =0 ; +struct resource *res; +struct device *dev = &pdev->dev; +struct k3_bandgap *bgp; +struct k3_thermal_data *data; + +if (ARRAY_SIZE (k3_adc_to_temp) != (K3_VTM_ADC_END_VAL +1 - +K3_VTM_ADC_BEGIN_VAL )) +return -EINVAL ; + + bgp =devm_kzalloc (&pdev->dev,sizeof (*bgp),GFP_KERNEL ); +if (!bgp) +return -ENOMEM ; + + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); + bgp->base =devm_ioremap_resource (dev, res); +if (IS_ERR (bgp->base)) +return PTR_ERR (bgp->base); + +pm_runtime_enable (dev); + ret =pm_runtime_get_sync (dev); +if (ret <0 ) { +pm_runtime_put_noidle (dev); +pm_runtime_disable (dev); +return ret; + } + +/* Get the sensor count in the VTM */ + val =readl (bgp->base +K3_VTM_DEVINFO_PWR0_OFFSET ); + cnt = val &K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ; + cnt >>=__ffs (K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ); + + data =devm_kcalloc (dev, cnt,sizeof (*data),GFP_KERNEL ); +if (!data) { + ret = -ENOMEM ; + goto err_alloc; + } + +/* Register the thermal sensors */ +for (id =0 ; id < cnt; id++) { + data[id].sensor_id = id; + data[id].bgp = bgp; + data[id].ctrl_offset =K3_VTM_TMPSENS0_CTRL_OFFSET + + id *K3_VTM_REGS_PER_TS ; + data[id].stat_offset = data[id].ctrl_offset +0x8 ; + + val =readl (data[id].bgp->base + data[id].ctrl_offset); + val |= (K3_VTM_TMPSENS_CTRL_SOC | +K3_VTM_TMPSENS_CTRL_CLRZ | +K3_VTM_TMPSENS_CTRL_CLKON_REQ ); + val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL ; +writel (val, data[id].bgp->base + data[id].ctrl_offset); + + data[id].ti_thermal = +devm_thermal_zone_of_sensor_register (dev, id, + &data[id], + &k3_of_thermal_ops); +if (IS_ERR (data[id].ti_thermal)) { +dev_err (dev,"thermal zone device is NULL\n" ); + ret =PTR_ERR (data[id].ti_thermal); + goto err_alloc; + } + + reg_cnt++; + } + +platform_set_drvdata (pdev, bgp); + +return 0 ; + +err_alloc: +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev); + +return ret; +} + +static int k3_bandgap_remove (struct platform_device *pdev) +{ +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev); + +return 0 ; +} + +static const struct of_device_id of_k3_bandgap_match[] = { + { + .compatible ="ti,am654-vtm" , + }, + {/* sentinel */ }, +}; +MODULE_DEVICE_TABLE (of, of_k3_bandgap_match); + +static struct platform_driver k3_bandgap_sensor_driver = { + .probe = k3_bandgap_probe, + .remove = k3_bandgap_remove, + .driver = { + .name ="k3-soc-thermal" , + .of_match_table = of_k3_bandgap_match, + }, +}; + +module_platform_driver (k3_bandgap_sensor_driver); + +MODULE_DESCRIPTION ("K3 bandgap temperature sensor driver" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_AUTHOR ("J Keerthy <[email protected]>" );
Quoted 10 lines · Keerthy
The bandgap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures only is supported. There are no active/passive cooling agent supported.
Signed-off-by Keerthy <[email protected]>---
[ ... ]
drivers/thermal/k3_bandgap.c line 162
Quoted 3 lines
drivers/thermal/k3_bandgap.c new file +3
-0+static int k3_bandgap_probe (struct platform_device *pdev) +{ +int ret =0 , cnt, val, id, reg_cnt =0 ;
We missed 'reg_cnt' which is not used.
[ ... ]
Quoted 27 lines
drivers/thermal/k3_bandgap.c new file +27
-0+/* Register the thermal sensors */ +for (id =0 ; id < cnt; id++) { + data[id].sensor_id = id; + data[id].bgp = bgp; + data[id].ctrl_offset =K3_VTM_TMPSENS0_CTRL_OFFSET + + id *K3_VTM_REGS_PER_TS ; + data[id].stat_offset = data[id].ctrl_offset +0x8 ; + + val =readl (data[id].bgp->base + data[id].ctrl_offset); + val |= (K3_VTM_TMPSENS_CTRL_SOC | +K3_VTM_TMPSENS_CTRL_CLRZ | +K3_VTM_TMPSENS_CTRL_CLKON_REQ ); + val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL ; +writel (val, data[id].bgp->base + data[id].ctrl_offset); + + data[id].ti_thermal = +devm_thermal_zone_of_sensor_register (dev, id, + &data[id], + &k3_of_thermal_ops); +if (IS_ERR (data[id].ti_thermal)) { +dev_err (dev,"thermal zone device is NULL\n" ); + ret =PTR_ERR (data[id].ti_thermal); + goto err_alloc; + } + + reg_cnt++; + }
[ ... ]
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
Quoted 71 lines · Keerthy
The bandgap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures only is supported. There are no active/passive cooling agent supported.
Signed-off-by Keerthy <[email protected]>---
Changes in v5:
* Removed thermal work function which was unused.
* Removed unusedpreve_tenmpand a couple more struct variables.
* Removed couple of redundant header function include.drivers/thermal/Kconfig | 10 ++ drivers/thermal/Makefile | 1 + drivers/thermal/k3_bandgap.c | 268 +++++++++++++++++++++++++++++++++++ 3 files changed, 279 insertions(+) create mode 100644 drivers/thermal/k3_bandgap.cdrivers/thermal/Kconfig +10
-0@@ -251,6 +251,16 @@ config IMX_THERMAL cpufreq is used as the cooling device to throttle CPUs when the passive trip is crossed. +config K3_THERMAL + tristate "Texas Instruments K3 thermal support" + depends on ARCH_K3 || COMPILE_TEST + help + If you say yes here you get thermal support for the Texas Instruments + K3 SoC family. The current chip supported is: + - AM654 + + This includes temperature reading functionality. + config MAX77620_THERMAL tristate "Temperature sensor driver for Maxim MAX77620 PMIC" depends on MFD_MAX77620drivers/thermal/Makefile +1
-0@@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o +obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.odrivers/thermal/k3_bandgap.c new file +8
-0@@ -0,0 +1,268 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* TI Bandgap temperature sensor driver for K3 SoC Family +* +* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +*/ + +#include <linux/module.h>
drivers/thermal/k3_bandgap.c line 18
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pm_runtime.h> +#include <linux/err.h> +#include <linux/types.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/thermal.h> +#include <linux/of.h> +
Sort these includes alphabetically
drivers/thermal/k3_bandgap.c line 20
Quoted 2 lines
drivers/thermal/k3_bandgap.c new file +2
-0+#define K3_VTM_DEVINFO_PWR0_OFFSET 0x4 +#define K3_VTM_DEVINFO_PWR0_CVD_CT_MASK 0xf
Not used, remove.
drivers/thermal/k3_bandgap.c line 25
Quoted 5 lines
drivers/thermal/k3_bandgap.c new file +5
-0+#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK 0xf0 +#define K3_VTM_TMPSENS0_CTRL_OFFSET 0x80 +#define K3_VTM_REGS_PER_TS 0x10 +#define K3_VTM_TS_STAT_DTEMP_MASK 0x3ff +#define K3_VTM_MAX_NUM_TS 8
Not used, remove
Quoted 51 lines
drivers/thermal/k3_bandgap.c new file +51
-0+#define K3_VTM_TMPSENS_CTRL_CBIASSEL BIT(0) +#define K3_VTM_TMPSENS_CTRL_SOC BIT(5) +#define K3_VTM_TMPSENS_CTRL_CLRZ BIT(6) +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ BIT(7) + +#define K3_VTM_ADC_BEGIN_VAL 540 +#define K3_VTM_ADC_END_VAL 944 + +static const int k3_adc_to_temp[] = { +-40000 ,-40000 ,-40000 ,-40000 ,-39800 ,-39400 ,-39000 ,-38600 ,-38200 , +-37800 ,-37400 ,-37000 ,-36600 ,-36200 ,-35800 ,-35300 ,-34700 ,-34200 , +-33800 ,-33400 ,-33000 ,-32600 ,-32200 ,-31800 ,-31400 ,-31000 ,-30600 , +-30200 ,-29800 ,-29400 ,-29000 ,-28600 ,-28200 ,-27700 ,-27100 ,-26600 , +-26200 ,-25800 ,-25400 ,-25000 ,-24600 ,-24200 ,-23800 ,-23400 ,-23000 , +-22600 ,-22200 ,-21800 ,-21400 ,-21000 ,-20500 ,-19900 ,-19400 ,-19000 , +-18600 ,-18200 ,-17800 ,-17400 ,-17000 ,-16600 ,-16200 ,-15800 ,-15400 , +-15000 ,-14600 ,-14200 ,-13800 ,-13400 ,-13000 ,-12500 ,-11900 ,-11400 , +-11000 ,-10600 ,-10200 ,-9800 ,-9400 ,-9000 ,-8600 ,-8200 ,-7800 ,-7400 , +-7000 ,-6600 ,-6200 ,-5800 ,-5400 ,-5000 ,-4500 ,-3900 ,-3400 ,-3000 , +-2600 ,-2200 ,-1800 ,-1400 ,-1000 ,-600 ,-200 ,200 ,600 ,1000 ,1400 , +1800 ,2200 ,2600 ,3000 ,3400 ,3900 ,4500 ,5000 ,5400 ,5800 ,6200 ,6600 , +7000 ,7400 ,7800 ,8200 ,8600 ,9000 ,9400 ,9800 ,10200 ,10600 ,11000 , +11400 ,11800 ,12200 ,12700 ,13300 ,13800 ,14200 ,14600 ,15000 ,15400 , +15800 ,16200 ,16600 ,17000 ,17400 ,17800 ,18200 ,18600 ,19000 ,19400 , +19800 ,20200 ,20600 ,21000 ,21400 ,21900 ,22500 ,23000 ,23400 ,23800 , +24200 ,24600 ,25000 ,25400 ,25800 ,26200 ,26600 ,27000 ,27400 ,27800 , +28200 ,28600 ,29000 ,29400 ,29800 ,30200 ,30600 ,31000 ,31400 ,31900 , +32500 ,33000 ,33400 ,33800 ,34200 ,34600 ,35000 ,35400 ,35800 ,36200 , +36600 ,37000 ,37400 ,37800 ,38200 ,38600 ,39000 ,39400 ,39800 ,40200 , +40600 ,41000 ,41400 ,41800 ,42200 ,42600 ,43100 ,43700 ,44200 ,44600 , +45000 ,45400 ,45800 ,46200 ,46600 ,47000 ,47400 ,47800 ,48200 ,48600 , +49000 ,49400 ,49800 ,50200 ,50600 ,51000 ,51400 ,51800 ,52200 ,52600 , +53000 ,53400 ,53800 ,54200 ,54600 ,55000 ,55400 ,55900 ,56500 ,57000 , +57400 ,57800 ,58200 ,58600 ,59000 ,59400 ,59800 ,60200 ,60600 ,61000 , +61400 ,61800 ,62200 ,62600 ,63000 ,63400 ,63800 ,64200 ,64600 ,65000 , +65400 ,65800 ,66200 ,66600 ,67000 ,67400 ,67800 ,68200 ,68600 ,69000 , +69400 ,69800 ,70200 ,70600 ,71000 ,71500 ,72100 ,72600 ,73000 ,73400 , +73800 ,74200 ,74600 ,75000 ,75400 ,75800 ,76200 ,76600 ,77000 ,77400 , +77800 ,78200 ,78600 ,79000 ,79400 ,79800 ,80200 ,80600 ,81000 ,81400 , +81800 ,82200 ,82600 ,83000 ,83400 ,83800 ,84200 ,84600 ,85000 ,85400 , +85800 ,86200 ,86600 ,87000 ,87400 ,87800 ,88200 ,88600 ,89000 ,89400 , +89800 ,90200 ,90600 ,91000 ,91400 ,91800 ,92200 ,92600 ,93000 ,93400 , +93800 ,94200 ,94600 ,95000 ,95400 ,95800 ,96200 ,96600 ,97000 ,97500 , +98100 ,98600 ,99000 ,99400 ,99800 ,100200 ,100600 ,101000 ,101400 , +101800 ,102200 ,102600 ,103000 ,103400 ,103800 ,104200 ,104600 ,105000 , +105400 ,105800 ,106200 ,106600 ,107000 ,107400 ,107800 ,108200 ,108600 , +109000 ,109400 ,109800 ,110200 ,110600 ,111000 ,111400 ,111800 ,112200 , +112600 ,113000 ,113400 ,113800 ,114200 ,114600 ,115000 ,115400 ,115800 , +116200 ,116600 ,117000 ,117400 ,117800 ,118200 ,118600 ,119000 ,119400 , +119800 ,120200 ,120600 ,121000 ,121400 ,121800 ,122200 ,122600 ,123000 , +123400 ,123800 ,124200 ,124600 ,124900 ,125000 ,
drivers/thermal/k3_bandgap.c line 86
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+}; + +struct k3_bandgap { +void __iomem *base; +const struct k3_bandgap_data *conf; +}; + +/* common data structures */ +struct k3_thermal_data { +struct thermal_zone_device *ti_thermal;
Nit: perhap use tzd/tzdev instead of ti_thermal which doesn't really say much?
Quoted 28 lines
drivers/thermal/k3_bandgap.c new file +28
-0+struct k3_bandgap *bgp; +int sensor_id; +u32 ctrl_offset; +u32 stat_offset; +}; + +static unsigned int vtm_get_best_value (unsigned int s0,unsigned int s1, +unsigned int s2) +{ +int d01 =abs (s0 - s1); +int d02 =abs (s0 - s2); +int d12 =abs (s1 - s2); + +if (d01 <= d02 && d01 <= d12) +return (s0 + s1) /2 ; + +if (d02 <= d01 && d02 <= d12) +return (s0 + s2) /2 ; + +return (s1 + s2) /2 ; +} + +static int k3_bgp_read_temp (struct k3_thermal_data *devdata, +int *temp) +{ +struct k3_bandgap *bgp; +unsigned int dtemp, s0, s1, s2; +
drivers/thermal/k3_bandgap.c line 124
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+ bgp = devdata->bgp; + +/* +* Errata is applicable for am654 pg 1.0 silicon. There +* is a variation of the order for 8-10 degree centigrade. +* Work around that by getting the average of two closest +* readings out of three readings everytime we want to +* report temperatures. +* +* Errata workaround.
So there is no fix in later versions of silicon? If so, shouldn't this errata only apply to a subset of chips after checking some IP version?
Quoted 100 lines
drivers/thermal/k3_bandgap.c new file +100
-0+*/ + s0 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s1 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s2 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + dtemp =vtm_get_best_value (s0, s1, s2); + +if (dtemp <K3_VTM_ADC_BEGIN_VAL || dtemp >K3_VTM_ADC_END_VAL ) +return -EINVAL ; + + *temp = k3_adc_to_temp[dtemp -K3_VTM_ADC_BEGIN_VAL ]; + +return 0 ; +} + +static int k3_thermal_get_temp (void *devdata,int *temp) +{ +struct k3_thermal_data *data = devdata; +int ret =0 ; + + ret =k3_bgp_read_temp (data, temp); +if (ret) +return ret; + +return ret; +} + +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = { + .get_temp = k3_thermal_get_temp, +}; + +static const struct of_device_id of_k3_bandgap_match[]; + +static int k3_bandgap_probe (struct platform_device *pdev) +{ +int ret =0 , cnt, val, id, reg_cnt =0 ; +struct resource *res; +struct device *dev = &pdev->dev; +struct k3_bandgap *bgp; +struct k3_thermal_data *data; + +if (ARRAY_SIZE (k3_adc_to_temp) != (K3_VTM_ADC_END_VAL +1 - +K3_VTM_ADC_BEGIN_VAL )) +return -EINVAL ; + + bgp =devm_kzalloc (&pdev->dev,sizeof (*bgp),GFP_KERNEL ); +if (!bgp) +return -ENOMEM ; + + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); + bgp->base =devm_ioremap_resource (dev, res); +if (IS_ERR (bgp->base)) +return PTR_ERR (bgp->base); + +pm_runtime_enable (dev); + ret =pm_runtime_get_sync (dev); +if (ret <0 ) { +pm_runtime_put_noidle (dev); +pm_runtime_disable (dev); +return ret; + } + +/* Get the sensor count in the VTM */ + val =readl (bgp->base +K3_VTM_DEVINFO_PWR0_OFFSET ); + cnt = val &K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ; + cnt >>=__ffs (K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ); + + data =devm_kcalloc (dev, cnt,sizeof (*data),GFP_KERNEL ); +if (!data) { + ret = -ENOMEM ; + goto err_alloc; + } + +/* Register the thermal sensors */ +for (id =0 ; id < cnt; id++) { + data[id].sensor_id = id; + data[id].bgp = bgp; + data[id].ctrl_offset =K3_VTM_TMPSENS0_CTRL_OFFSET + + id *K3_VTM_REGS_PER_TS ; + data[id].stat_offset = data[id].ctrl_offset +0x8 ; + + val =readl (data[id].bgp->base + data[id].ctrl_offset); + val |= (K3_VTM_TMPSENS_CTRL_SOC | +K3_VTM_TMPSENS_CTRL_CLRZ | +K3_VTM_TMPSENS_CTRL_CLKON_REQ ); + val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL ; +writel (val, data[id].bgp->base + data[id].ctrl_offset); + + data[id].ti_thermal = +devm_thermal_zone_of_sensor_register (dev, id, + &data[id], + &k3_of_thermal_ops); +if (IS_ERR (data[id].ti_thermal)) { +dev_err (dev,"thermal zone device is NULL\n" ); + ret =PTR_ERR (data[id].ti_thermal); + goto err_alloc; + } +
drivers/thermal/k3_bandgap.c line 234
Quoted 10 lines
drivers/thermal/k3_bandgap.c new file +10
-0+ reg_cnt++; + } + +platform_set_drvdata (pdev, bgp); + +return 0 ; + +err_alloc: +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev);
Just use dev?
Quoted 37 lines
drivers/thermal/k3_bandgap.c new file +34
-1+ +return ret; +} + +static int k3_bandgap_remove (struct platform_device *pdev) +{ +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev); + +return 0 ; +} + +static const struct of_device_id of_k3_bandgap_match[] = { + { + .compatible ="ti,am654-vtm" , + }, + {/* sentinel */ }, +}; +MODULE_DEVICE_TABLE (of, of_k3_bandgap_match); + +static struct platform_driver k3_bandgap_sensor_driver = { + .probe = k3_bandgap_probe, + .remove = k3_bandgap_remove, + .driver = { + .name ="k3-soc-thermal" , + .of_match_table = of_k3_bandgap_match, + }, +}; + +module_platform_driver (k3_bandgap_sensor_driver); + +MODULE_DESCRIPTION ("K3 bandgap temperature sensor driver" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_AUTHOR ("J Keerthy <[email protected]>" ); --2.17.1
Quoted 76 lines · Amit Kucheria
Quoted 75 lines · Keerthy
The bandgap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Currently reading temperatures only is supported. There are no active/passive cooling agent supported.
Signed-off-by Keerthy <[email protected]>---
Changes in v5:
* Removed thermal work function which was unused.
* Removed unusedpreve_tenmpand a couple more struct variables.
* Removed couple of redundant header function include.drivers/thermal/Kconfig | 10 ++ drivers/thermal/Makefile | 1 + drivers/thermal/k3_bandgap.c | 268 +++++++++++++++++++++++++++++++++++ 3 files changed, 279 insertions(+)create mode 100644
drivers/thermal/k3_bandgap.cdrivers/thermal/Kconfig +10
-0@@ -251,6 +251,16 @@ config IMX_THERMAL cpufreq is used as the cooling device to throttle CPUs when the passive trip is crossed. +config K3_THERMAL + tristate "Texas Instruments K3 thermal support" + depends on ARCH_K3 || COMPILE_TEST + help + If you say yes here you get thermal support for the Texas Instruments + K3 SoC family. The current chip supported is: + - AM654 + + This includes temperature reading functionality. + config MAX77620_THERMAL tristate "Temperature sensor driver for Maxim MAX77620 PMIC" depends on MFD_MAX77620drivers/thermal/Makefile +1
-0@@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o +obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.odrivers/thermal/k3_bandgap.c new file +12
-0@@ -0,0 +1,268 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* TI Bandgap temperature sensor driver for K3 SoC Family +* +* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pm_runtime.h> +#include <linux/err.h>
Quoted 8 lines
drivers/thermal/k3_bandgap.c line 18
Quoted 6 lines
drivers/thermal/k3_bandgap.c new file +6
-0+#include <linux/types.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/thermal.h> +#include <linux/of.h> +Sort these includes alphabetically
Okay
Quoted 6 lines
drivers/thermal/k3_bandgap.c line 20
Quoted 4 lines
drivers/thermal/k3_bandgap.c new file +2
-0+#define K3_VTM_DEVINFO_PWR0_OFFSET 0x4 +#define K3_VTM_DEVINFO_PWR0_CVD_CT_MASK 0xfNot used, remove.
Okay
Quoted 8 lines
drivers/thermal/k3_bandgap.c line 25
Quoted 6 lines
drivers/thermal/k3_bandgap.c new file +5
-0+#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK 0xf0 +#define K3_VTM_TMPSENS0_CTRL_OFFSET 0x80 +#define K3_VTM_REGS_PER_TS 0x10 +#define K3_VTM_TS_STAT_DTEMP_MASK 0x3ff +#define K3_VTM_MAX_NUM_TS 8Not used, remove
okay
Quoted 56 lines
Quoted 56 lines
drivers/thermal/k3_bandgap.c new file +55
-0+#define K3_VTM_TMPSENS_CTRL_CBIASSEL BIT(0) +#define K3_VTM_TMPSENS_CTRL_SOC BIT(5) +#define K3_VTM_TMPSENS_CTRL_CLRZ BIT(6) +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ BIT(7) + +#define K3_VTM_ADC_BEGIN_VAL 540 +#define K3_VTM_ADC_END_VAL 944 + +static const int k3_adc_to_temp[] = { +-40000 ,-40000 ,-40000 ,-40000 ,-39800 ,-39400 ,-39000 ,-38600 ,-38200 , +-37800 ,-37400 ,-37000 ,-36600 ,-36200 ,-35800 ,-35300 ,-34700 ,-34200 , +-33800 ,-33400 ,-33000 ,-32600 ,-32200 ,-31800 ,-31400 ,-31000 ,-30600 , +-30200 ,-29800 ,-29400 ,-29000 ,-28600 ,-28200 ,-27700 ,-27100 ,-26600 , +-26200 ,-25800 ,-25400 ,-25000 ,-24600 ,-24200 ,-23800 ,-23400 ,-23000 , +-22600 ,-22200 ,-21800 ,-21400 ,-21000 ,-20500 ,-19900 ,-19400 ,-19000 , +-18600 ,-18200 ,-17800 ,-17400 ,-17000 ,-16600 ,-16200 ,-15800 ,-15400 , +-15000 ,-14600 ,-14200 ,-13800 ,-13400 ,-13000 ,-12500 ,-11900 ,-11400 , +-11000 ,-10600 ,-10200 ,-9800 ,-9400 ,-9000 ,-8600 ,-8200 ,-7800 ,-7400 , +-7000 ,-6600 ,-6200 ,-5800 ,-5400 ,-5000 ,-4500 ,-3900 ,-3400 ,-3000 , +-2600 ,-2200 ,-1800 ,-1400 ,-1000 ,-600 ,-200 ,200 ,600 ,1000 ,1400 , +1800 ,2200 ,2600 ,3000 ,3400 ,3900 ,4500 ,5000 ,5400 ,5800 ,6200 ,6600 , +7000 ,7400 ,7800 ,8200 ,8600 ,9000 ,9400 ,9800 ,10200 ,10600 ,11000 , +11400 ,11800 ,12200 ,12700 ,13300 ,13800 ,14200 ,14600 ,15000 ,15400 , +15800 ,16200 ,16600 ,17000 ,17400 ,17800 ,18200 ,18600 ,19000 ,19400 , +19800 ,20200 ,20600 ,21000 ,21400 ,21900 ,22500 ,23000 ,23400 ,23800 , +24200 ,24600 ,25000 ,25400 ,25800 ,26200 ,26600 ,27000 ,27400 ,27800 , +28200 ,28600 ,29000 ,29400 ,29800 ,30200 ,30600 ,31000 ,31400 ,31900 , +32500 ,33000 ,33400 ,33800 ,34200 ,34600 ,35000 ,35400 ,35800 ,36200 , +36600 ,37000 ,37400 ,37800 ,38200 ,38600 ,39000 ,39400 ,39800 ,40200 , +40600 ,41000 ,41400 ,41800 ,42200 ,42600 ,43100 ,43700 ,44200 ,44600 , +45000 ,45400 ,45800 ,46200 ,46600 ,47000 ,47400 ,47800 ,48200 ,48600 , +49000 ,49400 ,49800 ,50200 ,50600 ,51000 ,51400 ,51800 ,52200 ,52600 , +53000 ,53400 ,53800 ,54200 ,54600 ,55000 ,55400 ,55900 ,56500 ,57000 , +57400 ,57800 ,58200 ,58600 ,59000 ,59400 ,59800 ,60200 ,60600 ,61000 , +61400 ,61800 ,62200 ,62600 ,63000 ,63400 ,63800 ,64200 ,64600 ,65000 , +65400 ,65800 ,66200 ,66600 ,67000 ,67400 ,67800 ,68200 ,68600 ,69000 , +69400 ,69800 ,70200 ,70600 ,71000 ,71500 ,72100 ,72600 ,73000 ,73400 , +73800 ,74200 ,74600 ,75000 ,75400 ,75800 ,76200 ,76600 ,77000 ,77400 , +77800 ,78200 ,78600 ,79000 ,79400 ,79800 ,80200 ,80600 ,81000 ,81400 , +81800 ,82200 ,82600 ,83000 ,83400 ,83800 ,84200 ,84600 ,85000 ,85400 , +85800 ,86200 ,86600 ,87000 ,87400 ,87800 ,88200 ,88600 ,89000 ,89400 , +89800 ,90200 ,90600 ,91000 ,91400 ,91800 ,92200 ,92600 ,93000 ,93400 , +93800 ,94200 ,94600 ,95000 ,95400 ,95800 ,96200 ,96600 ,97000 ,97500 , +98100 ,98600 ,99000 ,99400 ,99800 ,100200 ,100600 ,101000 ,101400 , +101800 ,102200 ,102600 ,103000 ,103400 ,103800 ,104200 ,104600 ,105000 , +105400 ,105800 ,106200 ,106600 ,107000 ,107400 ,107800 ,108200 ,108600 , +109000 ,109400 ,109800 ,110200 ,110600 ,111000 ,111400 ,111800 ,112200 , +112600 ,113000 ,113400 ,113800 ,114200 ,114600 ,115000 ,115400 ,115800 , +116200 ,116600 ,117000 ,117400 ,117800 ,118200 ,118600 ,119000 ,119400 , +119800 ,120200 ,120600 ,121000 ,121400 ,121800 ,122200 ,122600 ,123000 , +123400 ,123800 ,124200 ,124600 ,124900 ,125000 , +}; + +struct k3_bandgap { +void __iomem *base;
Quoted 8 lines
drivers/thermal/k3_bandgap.c line 86
Quoted 6 lines
drivers/thermal/k3_bandgap.c new file +6
-0+const struct k3_bandgap_data *conf; +}; + +/* common data structures */ +struct k3_thermal_data { +struct thermal_zone_device *ti_thermal;Nit: perhap use tzd/tzdev instead of
ti_thermalwhich doesn't really say much?
okay
Quoted 34 lines
Quoted 34 lines
drivers/thermal/k3_bandgap.c new file +33
-0+struct k3_bandgap *bgp; +int sensor_id; +u32 ctrl_offset; +u32 stat_offset; +}; + +static unsigned int vtm_get_best_value (unsigned int s0,unsigned int s1, +unsigned int s2) +{ +int d01 =abs (s0 - s1); +int d02 =abs (s0 - s2); +int d12 =abs (s1 - s2); + +if (d01 <= d02 && d01 <= d12) +return (s0 + s1) /2 ; + +if (d02 <= d01 && d02 <= d12) +return (s0 + s2) /2 ; + +return (s1 + s2) /2 ; +} + +static int k3_bgp_read_temp (struct k3_thermal_data *devdata, +int *temp) +{ +struct k3_bandgap *bgp; +unsigned int dtemp, s0, s1, s2; + + bgp = devdata->bgp; + +/* +* Errata is applicable for am654 pg 1.0 silicon. There +* is a variation of the order for 8-10 degree centigrade.
Quoted 8 lines
drivers/thermal/k3_bandgap.c line 124
Quoted 5 lines
drivers/thermal/k3_bandgap.c new file +5
-0+* Work around that by getting the average of two closest +* readings out of three readings everytime we want to +* report temperatures. +* +* Errata workaround. So there is no fix in later versions of silicon? If so, shouldn't this errata only apply to a subset of chips after checking some IP version?
The previous version of the driver had a check. Since no version of the silcion with that errata fixed it out i was adviced to on keeping this default. Once that is supported will bring in the check.
Quoted 106 lines
Quoted 106 lines
drivers/thermal/k3_bandgap.c new file +104
-0+*/ + s0 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s1 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s2 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + dtemp =vtm_get_best_value (s0, s1, s2); + +if (dtemp <K3_VTM_ADC_BEGIN_VAL || dtemp >K3_VTM_ADC_END_VAL ) +return -EINVAL ; + + *temp = k3_adc_to_temp[dtemp -K3_VTM_ADC_BEGIN_VAL ]; + +return 0 ; +} + +static int k3_thermal_get_temp (void *devdata,int *temp) +{ +struct k3_thermal_data *data = devdata; +int ret =0 ; + + ret =k3_bgp_read_temp (data, temp); +if (ret) +return ret; + +return ret; +} + +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = { + .get_temp = k3_thermal_get_temp, +}; + +static const struct of_device_id of_k3_bandgap_match[]; + +static int k3_bandgap_probe (struct platform_device *pdev) +{ +int ret =0 , cnt, val, id, reg_cnt =0 ; +struct resource *res; +struct device *dev = &pdev->dev; +struct k3_bandgap *bgp; +struct k3_thermal_data *data; + +if (ARRAY_SIZE (k3_adc_to_temp) != (K3_VTM_ADC_END_VAL +1 - +K3_VTM_ADC_BEGIN_VAL )) +return -EINVAL ; + + bgp =devm_kzalloc (&pdev->dev,sizeof (*bgp),GFP_KERNEL ); +if (!bgp) +return -ENOMEM ; + + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); + bgp->base =devm_ioremap_resource (dev, res); +if (IS_ERR (bgp->base)) +return PTR_ERR (bgp->base); + +pm_runtime_enable (dev); + ret =pm_runtime_get_sync (dev); +if (ret <0 ) { +pm_runtime_put_noidle (dev); +pm_runtime_disable (dev); +return ret; + } + +/* Get the sensor count in the VTM */ + val =readl (bgp->base +K3_VTM_DEVINFO_PWR0_OFFSET ); + cnt = val &K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ; + cnt >>=__ffs (K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ); + + data =devm_kcalloc (dev, cnt,sizeof (*data),GFP_KERNEL ); +if (!data) { + ret = -ENOMEM ; + goto err_alloc; + } + +/* Register the thermal sensors */ +for (id =0 ; id < cnt; id++) { + data[id].sensor_id = id; + data[id].bgp = bgp; + data[id].ctrl_offset =K3_VTM_TMPSENS0_CTRL_OFFSET + + id *K3_VTM_REGS_PER_TS ; + data[id].stat_offset = data[id].ctrl_offset +0x8 ; + + val =readl (data[id].bgp->base + data[id].ctrl_offset); + val |= (K3_VTM_TMPSENS_CTRL_SOC | +K3_VTM_TMPSENS_CTRL_CLRZ | +K3_VTM_TMPSENS_CTRL_CLKON_REQ ); + val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL ; +writel (val, data[id].bgp->base + data[id].ctrl_offset); + + data[id].ti_thermal = +devm_thermal_zone_of_sensor_register (dev, id, + &data[id], + &k3_of_thermal_ops); +if (IS_ERR (data[id].ti_thermal)) { +dev_err (dev,"thermal zone device is NULL\n" ); + ret =PTR_ERR (data[id].ti_thermal); + goto err_alloc; + } + + reg_cnt++; + } + +platform_set_drvdata (pdev, bgp);
Quoted 8 lines
drivers/thermal/k3_bandgap.c line 234
Quoted 6 lines
drivers/thermal/k3_bandgap.c new file +6
-0+ +return 0 ; + +err_alloc: +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev);Just use dev?
Okay
Thanks for the review.
Regards,
Keerthy
Quoted 31 lines
Quoted 31 lines
drivers/thermal/k3_bandgap.c new file +29
-0+ +return ret; +} + +static int k3_bandgap_remove (struct platform_device *pdev) +{ +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev); + +return 0 ; +} + +static const struct of_device_id of_k3_bandgap_match[] = { + { + .compatible ="ti,am654-vtm" , + }, + {/* sentinel */ }, +}; +MODULE_DEVICE_TABLE (of, of_k3_bandgap_match); + +static struct platform_driver k3_bandgap_sensor_driver = { + .probe = k3_bandgap_probe, + .remove = k3_bandgap_remove, + .driver = { + .name ="k3-soc-thermal" , + .of_match_table = of_k3_bandgap_match, + }, +}; +
Quoted 8 lines
Quoted 8 lines
drivers/thermal/k3_bandgap.c new file +5
-1+module_platform_driver (k3_bandgap_sensor_driver); + +MODULE_DESCRIPTION ("K3 bandgap temperature sensor driver" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_AUTHOR ("J Keerthy <[email protected]>" ); --2.17.1
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 5 lines · Keerthy
The bandgap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Your cover letter seems to have useful information that belongs in this commit message IMO.
Quoted 329 lines
Currently reading temperatures only is supported. There are no active/passive cooling agent supported.
Signed-off-by Keerthy <[email protected]>---
Changes in v5:
* Removed thermal work function which was unused.
* Removed unusedpreve_tenmpand a couple more struct variables.
* Removed couple of redundant header function include.drivers/thermal/Kconfig | 10 ++ drivers/thermal/Makefile | 1 + drivers/thermal/k3_bandgap.c | 268 +++++++++++++++++++++++++++++++++++ 3 files changed, 279 insertions(+) create mode 100644 drivers/thermal/k3_bandgap.cdrivers/thermal/Kconfig +10
-0@@ -251,6 +251,16 @@ config IMX_THERMAL cpufreq is used as the cooling device to throttle CPUs when the passive trip is crossed. +config K3_THERMAL + tristate "Texas Instruments K3 thermal support" + depends on ARCH_K3 || COMPILE_TEST + help + If you say yes here you get thermal support for the Texas Instruments + K3 SoC family. The current chip supported is: + - AM654 + + This includes temperature reading functionality. + config MAX77620_THERMAL tristate "Temperature sensor driver for Maxim MAX77620 PMIC" depends on MFD_MAX77620drivers/thermal/Makefile +1
-0@@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o +obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.odrivers/thermal/k3_bandgap.c new file +268
-1@@ -0,0 +1,268 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* TI Bandgap temperature sensor driver for K3 SoC Family +* +* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pm_runtime.h> +#include <linux/err.h> +#include <linux/types.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/thermal.h> +#include <linux/of.h> + +#define K3_VTM_DEVINFO_PWR0_OFFSET 0x4 +#define K3_VTM_DEVINFO_PWR0_CVD_CT_MASK 0xf +#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK 0xf0 +#define K3_VTM_TMPSENS0_CTRL_OFFSET 0x80 +#define K3_VTM_REGS_PER_TS 0x10 +#define K3_VTM_TS_STAT_DTEMP_MASK 0x3ff +#define K3_VTM_MAX_NUM_TS 8 +#define K3_VTM_TMPSENS_CTRL_CBIASSEL BIT(0) +#define K3_VTM_TMPSENS_CTRL_SOC BIT(5) +#define K3_VTM_TMPSENS_CTRL_CLRZ BIT(6) +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ BIT(7) + +#define K3_VTM_ADC_BEGIN_VAL 540 +#define K3_VTM_ADC_END_VAL 944 + +static const int k3_adc_to_temp[] = { +-40000 ,-40000 ,-40000 ,-40000 ,-39800 ,-39400 ,-39000 ,-38600 ,-38200 , +-37800 ,-37400 ,-37000 ,-36600 ,-36200 ,-35800 ,-35300 ,-34700 ,-34200 , +-33800 ,-33400 ,-33000 ,-32600 ,-32200 ,-31800 ,-31400 ,-31000 ,-30600 , +-30200 ,-29800 ,-29400 ,-29000 ,-28600 ,-28200 ,-27700 ,-27100 ,-26600 , +-26200 ,-25800 ,-25400 ,-25000 ,-24600 ,-24200 ,-23800 ,-23400 ,-23000 , +-22600 ,-22200 ,-21800 ,-21400 ,-21000 ,-20500 ,-19900 ,-19400 ,-19000 , +-18600 ,-18200 ,-17800 ,-17400 ,-17000 ,-16600 ,-16200 ,-15800 ,-15400 , +-15000 ,-14600 ,-14200 ,-13800 ,-13400 ,-13000 ,-12500 ,-11900 ,-11400 , +-11000 ,-10600 ,-10200 ,-9800 ,-9400 ,-9000 ,-8600 ,-8200 ,-7800 ,-7400 , +-7000 ,-6600 ,-6200 ,-5800 ,-5400 ,-5000 ,-4500 ,-3900 ,-3400 ,-3000 , +-2600 ,-2200 ,-1800 ,-1400 ,-1000 ,-600 ,-200 ,200 ,600 ,1000 ,1400 , +1800 ,2200 ,2600 ,3000 ,3400 ,3900 ,4500 ,5000 ,5400 ,5800 ,6200 ,6600 , +7000 ,7400 ,7800 ,8200 ,8600 ,9000 ,9400 ,9800 ,10200 ,10600 ,11000 , +11400 ,11800 ,12200 ,12700 ,13300 ,13800 ,14200 ,14600 ,15000 ,15400 , +15800 ,16200 ,16600 ,17000 ,17400 ,17800 ,18200 ,18600 ,19000 ,19400 , +19800 ,20200 ,20600 ,21000 ,21400 ,21900 ,22500 ,23000 ,23400 ,23800 , +24200 ,24600 ,25000 ,25400 ,25800 ,26200 ,26600 ,27000 ,27400 ,27800 , +28200 ,28600 ,29000 ,29400 ,29800 ,30200 ,30600 ,31000 ,31400 ,31900 , +32500 ,33000 ,33400 ,33800 ,34200 ,34600 ,35000 ,35400 ,35800 ,36200 , +36600 ,37000 ,37400 ,37800 ,38200 ,38600 ,39000 ,39400 ,39800 ,40200 , +40600 ,41000 ,41400 ,41800 ,42200 ,42600 ,43100 ,43700 ,44200 ,44600 , +45000 ,45400 ,45800 ,46200 ,46600 ,47000 ,47400 ,47800 ,48200 ,48600 , +49000 ,49400 ,49800 ,50200 ,50600 ,51000 ,51400 ,51800 ,52200 ,52600 , +53000 ,53400 ,53800 ,54200 ,54600 ,55000 ,55400 ,55900 ,56500 ,57000 , +57400 ,57800 ,58200 ,58600 ,59000 ,59400 ,59800 ,60200 ,60600 ,61000 , +61400 ,61800 ,62200 ,62600 ,63000 ,63400 ,63800 ,64200 ,64600 ,65000 , +65400 ,65800 ,66200 ,66600 ,67000 ,67400 ,67800 ,68200 ,68600 ,69000 , +69400 ,69800 ,70200 ,70600 ,71000 ,71500 ,72100 ,72600 ,73000 ,73400 , +73800 ,74200 ,74600 ,75000 ,75400 ,75800 ,76200 ,76600 ,77000 ,77400 , +77800 ,78200 ,78600 ,79000 ,79400 ,79800 ,80200 ,80600 ,81000 ,81400 , +81800 ,82200 ,82600 ,83000 ,83400 ,83800 ,84200 ,84600 ,85000 ,85400 , +85800 ,86200 ,86600 ,87000 ,87400 ,87800 ,88200 ,88600 ,89000 ,89400 , +89800 ,90200 ,90600 ,91000 ,91400 ,91800 ,92200 ,92600 ,93000 ,93400 , +93800 ,94200 ,94600 ,95000 ,95400 ,95800 ,96200 ,96600 ,97000 ,97500 , +98100 ,98600 ,99000 ,99400 ,99800 ,100200 ,100600 ,101000 ,101400 , +101800 ,102200 ,102600 ,103000 ,103400 ,103800 ,104200 ,104600 ,105000 , +105400 ,105800 ,106200 ,106600 ,107000 ,107400 ,107800 ,108200 ,108600 , +109000 ,109400 ,109800 ,110200 ,110600 ,111000 ,111400 ,111800 ,112200 , +112600 ,113000 ,113400 ,113800 ,114200 ,114600 ,115000 ,115400 ,115800 , +116200 ,116600 ,117000 ,117400 ,117800 ,118200 ,118600 ,119000 ,119400 , +119800 ,120200 ,120600 ,121000 ,121400 ,121800 ,122200 ,122600 ,123000 , +123400 ,123800 ,124200 ,124600 ,124900 ,125000 , +}; + +struct k3_bandgap { +void __iomem *base; +const struct k3_bandgap_data *conf; +}; + +/* common data structures */ +struct k3_thermal_data { +struct thermal_zone_device *ti_thermal; +struct k3_bandgap *bgp; +int sensor_id; +u32 ctrl_offset; +u32 stat_offset; +}; + +static unsigned int vtm_get_best_value (unsigned int s0,unsigned int s1, +unsigned int s2) +{ +int d01 =abs (s0 - s1); +int d02 =abs (s0 - s2); +int d12 =abs (s1 - s2); + +if (d01 <= d02 && d01 <= d12) +return (s0 + s1) /2 ; + +if (d02 <= d01 && d02 <= d12) +return (s0 + s2) /2 ; + +return (s1 + s2) /2 ; +} + +static int k3_bgp_read_temp (struct k3_thermal_data *devdata, +int *temp) +{ +struct k3_bandgap *bgp; +unsigned int dtemp, s0, s1, s2; + + bgp = devdata->bgp; + +/* +* Errata is applicable for am654 pg 1.0 silicon. There +* is a variation of the order for 8-10 degree centigrade. +* Work around that by getting the average of two closest +* readings out of three readings everytime we want to +* report temperatures. +* +* Errata workaround. +*/ + s0 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s1 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s2 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + dtemp =vtm_get_best_value (s0, s1, s2); + +if (dtemp <K3_VTM_ADC_BEGIN_VAL || dtemp >K3_VTM_ADC_END_VAL ) +return -EINVAL ; + + *temp = k3_adc_to_temp[dtemp -K3_VTM_ADC_BEGIN_VAL ]; + +return 0 ; +} + +static int k3_thermal_get_temp (void *devdata,int *temp) +{ +struct k3_thermal_data *data = devdata; +int ret =0 ; + + ret =k3_bgp_read_temp (data, temp); +if (ret) +return ret; + +return ret; +} + +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = { + .get_temp = k3_thermal_get_temp, +}; + +static const struct of_device_id of_k3_bandgap_match[]; + +static int k3_bandgap_probe (struct platform_device *pdev) +{ +int ret =0 , cnt, val, id, reg_cnt =0 ; +struct resource *res; +struct device *dev = &pdev->dev; +struct k3_bandgap *bgp; +struct k3_thermal_data *data; + +if (ARRAY_SIZE (k3_adc_to_temp) != (K3_VTM_ADC_END_VAL +1 - +K3_VTM_ADC_BEGIN_VAL )) +return -EINVAL ; + + bgp =devm_kzalloc (&pdev->dev,sizeof (*bgp),GFP_KERNEL ); +if (!bgp) +return -ENOMEM ; + + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); + bgp->base =devm_ioremap_resource (dev, res); +if (IS_ERR (bgp->base)) +return PTR_ERR (bgp->base); + +pm_runtime_enable (dev); + ret =pm_runtime_get_sync (dev); +if (ret <0 ) { +pm_runtime_put_noidle (dev); +pm_runtime_disable (dev); +return ret; + } + +/* Get the sensor count in the VTM */ + val =readl (bgp->base +K3_VTM_DEVINFO_PWR0_OFFSET ); + cnt = val &K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ; + cnt >>=__ffs (K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ); + + data =devm_kcalloc (dev, cnt,sizeof (*data),GFP_KERNEL ); +if (!data) { + ret = -ENOMEM ; + goto err_alloc; + } + +/* Register the thermal sensors */ +for (id =0 ; id < cnt; id++) { + data[id].sensor_id = id; + data[id].bgp = bgp; + data[id].ctrl_offset =K3_VTM_TMPSENS0_CTRL_OFFSET + + id *K3_VTM_REGS_PER_TS ; + data[id].stat_offset = data[id].ctrl_offset +0x8 ; + + val =readl (data[id].bgp->base + data[id].ctrl_offset); + val |= (K3_VTM_TMPSENS_CTRL_SOC | +K3_VTM_TMPSENS_CTRL_CLRZ | +K3_VTM_TMPSENS_CTRL_CLKON_REQ ); + val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL ; +writel (val, data[id].bgp->base + data[id].ctrl_offset); + + data[id].ti_thermal = +devm_thermal_zone_of_sensor_register (dev, id, + &data[id], + &k3_of_thermal_ops); +if (IS_ERR (data[id].ti_thermal)) { +dev_err (dev,"thermal zone device is NULL\n" ); + ret =PTR_ERR (data[id].ti_thermal); + goto err_alloc; + } + + reg_cnt++; + } + +platform_set_drvdata (pdev, bgp); + +return 0 ; + +err_alloc: +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev); + +return ret; +} + +static int k3_bandgap_remove (struct platform_device *pdev) +{ +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev); + +return 0 ; +} + +static const struct of_device_id of_k3_bandgap_match[] = { + { + .compatible ="ti,am654-vtm" , + }, + {/* sentinel */ }, +}; +MODULE_DEVICE_TABLE (of, of_k3_bandgap_match); + +static struct platform_driver k3_bandgap_sensor_driver = { + .probe = k3_bandgap_probe, + .remove = k3_bandgap_remove, + .driver = { + .name ="k3-soc-thermal" , + .of_match_table = of_k3_bandgap_match, + }, +}; + +module_platform_driver (k3_bandgap_sensor_driver); + +MODULE_DESCRIPTION ("K3 bandgap temperature sensor driver" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_AUTHOR ("J Keerthy <[email protected]>" ); --2.17.1
Quoted 9 lines · Amit Kucheria
Quoted 5 lines · Keerthy
The bandgap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.
Your cover letter seems to have useful information that belongs in this commit message IMO.
Okay. I will add that information here as well.
- Keerthy
Quoted 330 lines
Quoted 330 lines
Currently reading temperatures only is supported. There are no active/passive cooling agent supported.
Signed-off-by Keerthy <[email protected]>---
Changes in v5:
* Removed thermal work function which was unused.
* Removed unusedpreve_tenmpand a couple more struct variables.
* Removed couple of redundant header function include.drivers/thermal/Kconfig | 10 ++ drivers/thermal/Makefile | 1 + drivers/thermal/k3_bandgap.c | 268 +++++++++++++++++++++++++++++++++++ 3 files changed, 279 insertions(+)create mode 100644
drivers/thermal/k3_bandgap.cdrivers/thermal/Kconfig +10
-0@@ -251,6 +251,16 @@ config IMX_THERMAL cpufreq is used as the cooling device to throttle CPUs when the passive trip is crossed. +config K3_THERMAL + tristate "Texas Instruments K3 thermal support" + depends on ARCH_K3 || COMPILE_TEST + help + If you say yes here you get thermal support for the Texas Instruments + K3 SoC family. The current chip supported is: + - AM654 + + This includes temperature reading functionality. + config MAX77620_THERMAL tristate "Temperature sensor driver for Maxim MAX77620 PMIC" depends on MFD_MAX77620drivers/thermal/Makefile +1
-0@@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o +obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.odrivers/thermal/k3_bandgap.c new file +268
-1@@ -0,0 +1,268 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* TI Bandgap temperature sensor driver for K3 SoC Family +* +* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pm_runtime.h> +#include <linux/err.h> +#include <linux/types.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/thermal.h> +#include <linux/of.h> + +#define K3_VTM_DEVINFO_PWR0_OFFSET 0x4 +#define K3_VTM_DEVINFO_PWR0_CVD_CT_MASK 0xf +#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK 0xf0 +#define K3_VTM_TMPSENS0_CTRL_OFFSET 0x80 +#define K3_VTM_REGS_PER_TS 0x10 +#define K3_VTM_TS_STAT_DTEMP_MASK 0x3ff +#define K3_VTM_MAX_NUM_TS 8 +#define K3_VTM_TMPSENS_CTRL_CBIASSEL BIT(0) +#define K3_VTM_TMPSENS_CTRL_SOC BIT(5) +#define K3_VTM_TMPSENS_CTRL_CLRZ BIT(6) +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ BIT(7) + +#define K3_VTM_ADC_BEGIN_VAL 540 +#define K3_VTM_ADC_END_VAL 944 + +static const int k3_adc_to_temp[] = { +-40000 ,-40000 ,-40000 ,-40000 ,-39800 ,-39400 ,-39000 ,-38600 ,-38200 , +-37800 ,-37400 ,-37000 ,-36600 ,-36200 ,-35800 ,-35300 ,-34700 ,-34200 , +-33800 ,-33400 ,-33000 ,-32600 ,-32200 ,-31800 ,-31400 ,-31000 ,-30600 , +-30200 ,-29800 ,-29400 ,-29000 ,-28600 ,-28200 ,-27700 ,-27100 ,-26600 , +-26200 ,-25800 ,-25400 ,-25000 ,-24600 ,-24200 ,-23800 ,-23400 ,-23000 , +-22600 ,-22200 ,-21800 ,-21400 ,-21000 ,-20500 ,-19900 ,-19400 ,-19000 , +-18600 ,-18200 ,-17800 ,-17400 ,-17000 ,-16600 ,-16200 ,-15800 ,-15400 , +-15000 ,-14600 ,-14200 ,-13800 ,-13400 ,-13000 ,-12500 ,-11900 ,-11400 , +-11000 ,-10600 ,-10200 ,-9800 ,-9400 ,-9000 ,-8600 ,-8200 ,-7800 ,-7400 , +-7000 ,-6600 ,-6200 ,-5800 ,-5400 ,-5000 ,-4500 ,-3900 ,-3400 ,-3000 , +-2600 ,-2200 ,-1800 ,-1400 ,-1000 ,-600 ,-200 ,200 ,600 ,1000 ,1400 , +1800 ,2200 ,2600 ,3000 ,3400 ,3900 ,4500 ,5000 ,5400 ,5800 ,6200 ,6600 , +7000 ,7400 ,7800 ,8200 ,8600 ,9000 ,9400 ,9800 ,10200 ,10600 ,11000 , +11400 ,11800 ,12200 ,12700 ,13300 ,13800 ,14200 ,14600 ,15000 ,15400 , +15800 ,16200 ,16600 ,17000 ,17400 ,17800 ,18200 ,18600 ,19000 ,19400 , +19800 ,20200 ,20600 ,21000 ,21400 ,21900 ,22500 ,23000 ,23400 ,23800 , +24200 ,24600 ,25000 ,25400 ,25800 ,26200 ,26600 ,27000 ,27400 ,27800 , +28200 ,28600 ,29000 ,29400 ,29800 ,30200 ,30600 ,31000 ,31400 ,31900 , +32500 ,33000 ,33400 ,33800 ,34200 ,34600 ,35000 ,35400 ,35800 ,36200 , +36600 ,37000 ,37400 ,37800 ,38200 ,38600 ,39000 ,39400 ,39800 ,40200 , +40600 ,41000 ,41400 ,41800 ,42200 ,42600 ,43100 ,43700 ,44200 ,44600 , +45000 ,45400 ,45800 ,46200 ,46600 ,47000 ,47400 ,47800 ,48200 ,48600 , +49000 ,49400 ,49800 ,50200 ,50600 ,51000 ,51400 ,51800 ,52200 ,52600 , +53000 ,53400 ,53800 ,54200 ,54600 ,55000 ,55400 ,55900 ,56500 ,57000 , +57400 ,57800 ,58200 ,58600 ,59000 ,59400 ,59800 ,60200 ,60600 ,61000 , +61400 ,61800 ,62200 ,62600 ,63000 ,63400 ,63800 ,64200 ,64600 ,65000 , +65400 ,65800 ,66200 ,66600 ,67000 ,67400 ,67800 ,68200 ,68600 ,69000 , +69400 ,69800 ,70200 ,70600 ,71000 ,71500 ,72100 ,72600 ,73000 ,73400 , +73800 ,74200 ,74600 ,75000 ,75400 ,75800 ,76200 ,76600 ,77000 ,77400 , +77800 ,78200 ,78600 ,79000 ,79400 ,79800 ,80200 ,80600 ,81000 ,81400 , +81800 ,82200 ,82600 ,83000 ,83400 ,83800 ,84200 ,84600 ,85000 ,85400 , +85800 ,86200 ,86600 ,87000 ,87400 ,87800 ,88200 ,88600 ,89000 ,89400 , +89800 ,90200 ,90600 ,91000 ,91400 ,91800 ,92200 ,92600 ,93000 ,93400 , +93800 ,94200 ,94600 ,95000 ,95400 ,95800 ,96200 ,96600 ,97000 ,97500 , +98100 ,98600 ,99000 ,99400 ,99800 ,100200 ,100600 ,101000 ,101400 , +101800 ,102200 ,102600 ,103000 ,103400 ,103800 ,104200 ,104600 ,105000 , +105400 ,105800 ,106200 ,106600 ,107000 ,107400 ,107800 ,108200 ,108600 , +109000 ,109400 ,109800 ,110200 ,110600 ,111000 ,111400 ,111800 ,112200 , +112600 ,113000 ,113400 ,113800 ,114200 ,114600 ,115000 ,115400 ,115800 , +116200 ,116600 ,117000 ,117400 ,117800 ,118200 ,118600 ,119000 ,119400 , +119800 ,120200 ,120600 ,121000 ,121400 ,121800 ,122200 ,122600 ,123000 , +123400 ,123800 ,124200 ,124600 ,124900 ,125000 , +}; + +struct k3_bandgap { +void __iomem *base; +const struct k3_bandgap_data *conf; +}; + +/* common data structures */ +struct k3_thermal_data { +struct thermal_zone_device *ti_thermal; +struct k3_bandgap *bgp; +int sensor_id; +u32 ctrl_offset; +u32 stat_offset; +}; + +static unsigned int vtm_get_best_value (unsigned int s0,unsigned int s1, +unsigned int s2) +{ +int d01 =abs (s0 - s1); +int d02 =abs (s0 - s2); +int d12 =abs (s1 - s2); + +if (d01 <= d02 && d01 <= d12) +return (s0 + s1) /2 ; + +if (d02 <= d01 && d02 <= d12) +return (s0 + s2) /2 ; + +return (s1 + s2) /2 ; +} + +static int k3_bgp_read_temp (struct k3_thermal_data *devdata, +int *temp) +{ +struct k3_bandgap *bgp; +unsigned int dtemp, s0, s1, s2; + + bgp = devdata->bgp; + +/* +* Errata is applicable for am654 pg 1.0 silicon. There +* is a variation of the order for 8-10 degree centigrade. +* Work around that by getting the average of two closest +* readings out of three readings everytime we want to +* report temperatures. +* +* Errata workaround. +*/ + s0 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s1 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + s2 =readl (bgp->base + devdata->stat_offset) & +K3_VTM_TS_STAT_DTEMP_MASK ; + dtemp =vtm_get_best_value (s0, s1, s2); + +if (dtemp <K3_VTM_ADC_BEGIN_VAL || dtemp >K3_VTM_ADC_END_VAL ) +return -EINVAL ; + + *temp = k3_adc_to_temp[dtemp -K3_VTM_ADC_BEGIN_VAL ]; + +return 0 ; +} + +static int k3_thermal_get_temp (void *devdata,int *temp) +{ +struct k3_thermal_data *data = devdata; +int ret =0 ; + + ret =k3_bgp_read_temp (data, temp); +if (ret) +return ret; + +return ret; +} + +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = { + .get_temp = k3_thermal_get_temp, +}; + +static const struct of_device_id of_k3_bandgap_match[]; + +static int k3_bandgap_probe (struct platform_device *pdev) +{ +int ret =0 , cnt, val, id, reg_cnt =0 ; +struct resource *res; +struct device *dev = &pdev->dev; +struct k3_bandgap *bgp; +struct k3_thermal_data *data; + +if (ARRAY_SIZE (k3_adc_to_temp) != (K3_VTM_ADC_END_VAL +1 - +K3_VTM_ADC_BEGIN_VAL )) +return -EINVAL ; + + bgp =devm_kzalloc (&pdev->dev,sizeof (*bgp),GFP_KERNEL ); +if (!bgp) +return -ENOMEM ; + + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); + bgp->base =devm_ioremap_resource (dev, res); +if (IS_ERR (bgp->base)) +return PTR_ERR (bgp->base); + +pm_runtime_enable (dev); + ret =pm_runtime_get_sync (dev); +if (ret <0 ) { +pm_runtime_put_noidle (dev); +pm_runtime_disable (dev); +return ret; + } + +/* Get the sensor count in the VTM */ + val =readl (bgp->base +K3_VTM_DEVINFO_PWR0_OFFSET ); + cnt = val &K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ; + cnt >>=__ffs (K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK ); + + data =devm_kcalloc (dev, cnt,sizeof (*data),GFP_KERNEL ); +if (!data) { + ret = -ENOMEM ; + goto err_alloc; + } + +/* Register the thermal sensors */ +for (id =0 ; id < cnt; id++) { + data[id].sensor_id = id; + data[id].bgp = bgp; + data[id].ctrl_offset =K3_VTM_TMPSENS0_CTRL_OFFSET + + id *K3_VTM_REGS_PER_TS ; + data[id].stat_offset = data[id].ctrl_offset +0x8 ; + + val =readl (data[id].bgp->base + data[id].ctrl_offset); + val |= (K3_VTM_TMPSENS_CTRL_SOC | +K3_VTM_TMPSENS_CTRL_CLRZ | +K3_VTM_TMPSENS_CTRL_CLKON_REQ ); + val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL ; +writel (val, data[id].bgp->base + data[id].ctrl_offset); + + data[id].ti_thermal = +devm_thermal_zone_of_sensor_register (dev, id, + &data[id], + &k3_of_thermal_ops); +if (IS_ERR (data[id].ti_thermal)) { +dev_err (dev,"thermal zone device is NULL\n" ); + ret =PTR_ERR (data[id].ti_thermal); + goto err_alloc; + } + + reg_cnt++; + } + +platform_set_drvdata (pdev, bgp); + +return 0 ; + +err_alloc: +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev); + +return ret; +} + +static int k3_bandgap_remove (struct platform_device *pdev) +{ +pm_runtime_put_sync (&pdev->dev); +pm_runtime_disable (&pdev->dev); + +return 0 ; +} + +static const struct of_device_id of_k3_bandgap_match[] = { + { + .compatible ="ti,am654-vtm" , + }, + {/* sentinel */ }, +}; +MODULE_DEVICE_TABLE (of, of_k3_bandgap_match); + +static struct platform_driver k3_bandgap_sensor_driver = { + .probe = k3_bandgap_probe, + .remove = k3_bandgap_remove, + .driver = { + .name ="k3-soc-thermal" , + .of_match_table = of_k3_bandgap_match, + }, +}; + +module_platform_driver (k3_bandgap_sensor_driver); + +MODULE_DESCRIPTION ("K3 bandgap temperature sensor driver" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_AUTHOR ("J Keerthy <[email protected]>" ); --2.17.1
PATCH v5 3/4 arm64: dts: ti: am654: Add thermal zones
In reply to KeerthyThe am654 SoC has three thermal zones namely MPU0, MPU1 and MCU zones
--- .../dts/ti/k3-am654-industrial-thermal.dtsi | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi new file +45 -0
@@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +mpu0_thermal: mpu0_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu0_crit: mpu0_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mpu1_thermal: mpu1_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + mpu1_crit: mpu1_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mcu_thermal: mcu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + mcu_crit: mcu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +};
Signature · 1 line
2.17.1
Re: [PATCH v5 3/4] arm64: dts: ti: am654: Add thermal zones
Quoted 16 lines · Keerthy
The am654 SoC has three thermal zones namely MPU0, MPU1 and MCU zones
Signed-off-by Keerthy <[email protected]>--- .../dts/ti/k3-am654-industrial-thermal.dtsi | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsiarch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi new file +0
-0
arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi line 8
Quoted 8 lines
arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi new file +8
-0@@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +mpu0_thermal: mpu0_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>;
You are referencing the wkup_vtm0 node before defining it in the next patch.
Swap the order of the patches and move the include for thermal zones to this patch.
Quoted 40 lines
arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi new file +37
-1+ + trips { + mpu0_crit: mpu0_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mpu1_thermal: mpu1_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + mpu1_crit: mpu1_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mcu_thermal: mcu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + mcu_crit: mcu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; --2.17.1
PATCH v5 4/4 arm64: dts: ti: am6: Add VTM node
In reply to KeerthyVTM stands for voltage and thermal management. Add the vtm node and the associated thermal zones on the SoC.
--- arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +11 -0
@@ -89,4 +89,15 @@ clocks = <&k3_clks 59 0>; clock-names = "gpio"; }; + + wkup_vtm0: thermal@42050000 { + compatible = "ti,am654-vtm"; + reg = <0x42050000 0x25c>; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + thermal_zones: thermal-zones { + #include "k3-am654-industrial-thermal.dtsi" + }; };
Signature · 1 line
2.17.1
Re: [PATCH v5 4/4] arm64: dts: ti: am6: Add VTM node
Quoted 15 lines · Keerthy
VTM stands for voltage and thermal management. Add the vtm node and the associated thermal zones on the SoC.
Signed-off-by Keerthy <[email protected]>--- arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +0
-0@@ -89,4 +89,15 @@ clocks = <&k3_clks 59 0>;
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi line 99
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +8
-0clock-names = "gpio"; }; + + wkup_vtm0: thermal@42050000 { + compatible = "ti,am654-vtm"; + reg = <0x42050000 0x25c>; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; +
Make this patch 3
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi line 103
Quoted 4 lines
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +3
-0+ thermal_zones: thermal-zones { + #include "k3-am654-industrial-thermal.dtsi" + }; };
Move this with what is currently patch 3.
Quoted 3 lines
--
2.17.1
Re: [PATCH v5 4/4] arm64: dts: ti: am6: Add VTM node
Quoted 29 lines · Amit Kucheria
Quoted 15 lines · Keerthy
VTM stands for voltage and thermal management. Add the vtm node and the associated thermal zones on the SoC.
Signed-off-by Keerthy <[email protected]>--- arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +0
-0@@ -89,4 +89,15 @@ clocks = <&k3_clks 59 0>;arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi line 99
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +8
-0clock-names = "gpio"; }; + + wkup_vtm0: thermal@42050000 { + compatible = "ti,am654-vtm"; + reg = <0x42050000 0x25c>; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; +Make this patch 3
Quoted 6 lines
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi line 103
Quoted 4 lines
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +3
-0+ thermal_zones: thermal-zones { + #include "k3-am654-industrial-thermal.dtsi" + }; };Move this with what is currently patch 3.
Agreed on all the comments on patch 3 & 4.
I will incorporate them.
- Keerthy
Quoted 4 lines
Quoted 4 lines
--
2.17.1
Re: [PATCH v5 4/4] arm64: dts: ti: am6: Add VTM node
In reply to KeerthyHi Keerthy,
Should the subject refer to am65x instead of am6 since your dtsi file is called k3-am65-wakeup.dtsi?
Regards,
Amit
Quoted 32 lines · Keerthy
VTM stands for voltage and thermal management. Add the vtm node and the associated thermal zones on the SoC.
Signed-off-by Keerthy <[email protected]>--- arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +11
-1@@ -89,4 +89,15 @@ clocks = <&k3_clks 59 0>; clock-names = "gpio"; }; + + wkup_vtm0: thermal@42050000 { + compatible = "ti,am654-vtm"; + reg = <0x42050000 0x25c>; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + thermal_zones: thermal-zones { + #include "k3-am654-industrial-thermal.dtsi" + }; }; --2.17.1