Skip to content

thermal: k3: Add support for bandgap sensors

Keerthy linux-arm-kernel linux-devicetree linux-pm lkml 7 versions – Applied

Status from this message: Queued patches 3 & 4 towards 5.8, thanks.

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest4 patches 9 repliesApplied
  2. v54 patches 11 repliesSuperseded
  3. v4 posting 2/24 patches 5 repliesSuperseded
Earlier versions · 4
VersionPostedPatchesRepliesStatus
v4 posting 1/24 patches1 replySuperseded
v34 patches6 repliesSuperseded
v24 patches4 repliesSuperseded
v14 patches6 repliesSuperseded

Changes in v6 from the cover letter

* Removed bunch of unused #defines and couple of redundant variables.
* Reordered patches a bit.
* Minor reordering in dt binding patch.

Patches in v6 Applied

#Subject and filesSizeRepliesApplied
1/4dt-bindings: thermal: k3: Add VTM bindings documentationDocumentation/devicetree/bindings/thermal/ti,am654-thermal.yaml+56 -01 reply
2/4thermal: k3: Add support for bandgap sensorsdrivers/thermal/Kconfig drivers/thermal/Makefile drivers/thermal/k3_bandgap.c+275 -01 reply
3/4arm64: dts: ti: am65-wakeup: Add VTM nodearch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi+7 -01 reply
4/4arm64: dts: ti: am654: Add thermal zonesarch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi+49 -01 reply

Reviews trailers per patch

All 4 patches have a Reviewed-by or Acked-by.

PatchRob HerringAmit Kucheria
1/4R-b R-b
2/4R-b
3/4R-b
4/4R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v6 thread

Cover letter [PATCH v6 0/4] thermal: k3: Add support for bandgap sensors

Add VTM thermal support. In the Voltage Thermal
Management Module(VTM), K3 AM654 supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature.

Add support for bandgap sensors. Currently reading temperatures is supported.

Changes in v6:

* Removed bunch of unused #defines and couple of redundant variables.
* Reordered patches a bit.
* Minor reordering in dt binding patch.

Changes in v5:

* Removed thermal work function which was unused.
* Removed unused preve_tenmp and a couple more struct variables.
* Removed couple of redundant header function include.

Changes in v4:

* Fixed comments from Daniel to remove trend function.
* Mostly cleaned up all the unused variables.
* Driver from bool to tristate.

Changes in v3:

* Fixed errors seen with:
dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml

Changes in v2:

* Fixed yaml errors
* renamed am654-industrial-thermal.dtsi to k3-am654-industrial-thermal.dtsi to follow the convention for k3 family.

Keerthy (4):
dt-bindings: thermal: k3: Add VTM bindings documentation
thermal: k3: Add support for bandgap sensors
arm64: dts: ti: am65-wakeup: Add VTM node
arm64: dts: ti: am654: Add thermal zones

 .../bindings/thermal/ti,am654-thermal.yaml    |  56 ++++
 arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi    |  11 +
 .../dts/ti/k3-am654-industrial-thermal.dtsi   |  45 +++
 drivers/thermal/Kconfig                       |  10 +
 drivers/thermal/Makefile                      |   1 +
 drivers/thermal/k3_bandgap.c                  | 264 ++++++++++++++++++
 6 files changed, 387 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
 create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi
 create mode 100644 drivers/thermal/k3_bandgap.c
Signature · 1 line
2.17.1