add generic DT binding for RTS/CTS
cover add generic DT binding for RTS/CTS
Add support of generic DT binding for annoucing RTS/CTS lines. The initial binding 'st,hw-flow-control' is not needed anymore since generic binding is available, but is kept for backward compatibility.
Erwan Le Ray (2):
dt-bindings: serial: add generic DT binding for announcing RTS/CTS
lines
serial: stm32: Use generic DT binding for announcing RTS/CTS lines
Documentation/devicetree/bindings/serial/st,stm32-uart.yaml | 4 +++- drivers/tty/serial/stm32-usart.c | 5 +++-- 2 files changed, 6 insertions(+), 3 deletions(-)
Signature · 1 line
2.17.1
PATCH 1/2 dt-bindings: serial: add generic DT binding for announcing RTS/CTS lines
Add support of generic DT binding for annoucing RTS/CTS lines. The initial binding 'st,hw-flow-control' is not needed anymore since generic binding is available, but is kept for backward compatibility.
Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +3 -1
@@ -35,9 +35,11 @@ properties: description: label associated with this uart st,hw-flow-ctrl: - description: enable hardware flow control + description: enable hardware flow control (deprecated) $ref: /schemas/types.yaml#/definitions/flag + uart-has-rtscts: true + dmas: minItems: 1 maxItems: 2
Signature · 1 line
2.17.1
Greg Kroah-Hartman
maintainerRe: [PATCH 1/2] dt-bindings: serial: add generic DT binding for announcing RTS/CTS lines
Quoted 26 lines · Erwan Le Ray
Add support of generic DT binding for annoucing RTS/CTS lines. The initial binding 'st,hw-flow-control' is not needed anymore since generic binding is available, but is kept for backward compatibility.
Signed-off-by Erwan Le Ray <[email protected]>Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +3
-1@@ -35,9 +35,11 @@ properties: description: label associated with this uart st,hw-flow-ctrl: - description: enable hardware flow control + description: enable hardware flow control (deprecated) $ref: /schemas/types.yaml#/definitions/flag + uart-has-rtscts: true + dmas: minItems: 1 maxItems: 2Signature · 1 line
2.17.1
Did this get ignored by the DT maintainers? :(
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 1/2] dt-bindings: serial: add generic DT binding for announcing RTS/CTS lines
Quoted 19 lines · Greg Kroah-Hartman
Quoted 18 lines · Erwan Le Ray
Add support of generic DT binding for annoucing RTS/CTS lines. The initial binding 'st,hw-flow-control' is not needed anymore since generic binding is available, but is kept for backward compatibility.
Signed-off-by Erwan Le Ray <[email protected]>Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +1
-1@@ -35,9 +35,11 @@ properties: description: label associated with this uart st,hw-flow-ctrl: - description: enable hardware flow control + description: enable hardware flow control (deprecated) $ref: /schemas/types.yaml#/definitions/flag
Quoted 9 lines
Quoted 8 lines
Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +2
-0+ uart-has-rtscts: true + dmas: minItems: 1 maxItems: 2Signature · 1 line
2.17.1Did this get ignored by the DT maintainers? :(
Hi Rob,
Gentle reminder. Could you please provide your feedback on this patch ?
Best Regards, Erwan.
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Rob Herring
Reviewed-byRe: [PATCH 1/2] dt-bindings: serial: add generic DT binding for announcing RTS/CTS lines
In reply to Greg Kroah-HartmanQuoted 20 lines · Greg Kroah-Hartman
Quoted 18 lines · Erwan Le Ray
Add support of generic DT binding for annoucing RTS/CTS lines. The initial binding 'st,hw-flow-control' is not needed anymore since generic binding is available, but is kept for backward compatibility.
Signed-off-by Erwan Le Ray <[email protected]>Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +1
-1@@ -35,9 +35,11 @@ properties: description: label associated with this uart st,hw-flow-ctrl: - description: enable hardware flow control + description: enable hardware flow control (deprecated) $ref: /schemas/types.yaml#/definitions/flag
Quoted 10 lines
Quoted 8 lines
Documentation/devicetree/bindings/serial/st,stm32-uart.yaml +2
-1+ uart-has-rtscts: true + dmas: minItems: 1 maxItems: 2 --2.17.1
Did this get ignored by the DT maintainers? :(
When it doesn't go to the DT list, you are playing roulette whether I happen to see it. :(
Anyways,
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 2/2 serial: stm32: Use generic DT binding for announcing RTS/CTS lines
In reply to Erwan Le RayAdd support of generic DT binding for annoucing RTS/CTS lines. The initial binding 'st,hw-flow-control' is not needed anymore since generic binding is available, but is kept for backward compatibility.
drivers/tty/serial/stm32-usart.c +3 -2
@@ -1033,8 +1033,9 @@ static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev)if (WARN_ON (id >=STM32_MAX_PORTS ))return NULL ; - stm32_ports[id].hw_flow_control =of_property_read_bool (np, -"st,hw-flow-ctrl" ); + stm32_ports[id].hw_flow_control = +of_property_read_bool (np,"st,hw-flow-ctrl" )/*deprecated*/ || +of_property_read_bool (np,"uart-has-rtscts" ); stm32_ports[id].port.line = id; stm32_ports[id].cr1_irq =USART_CR1_RXNEIE ; stm32_ports[id].cr3_irq =0 ;
Signature · 7 lines
2.17.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel