Skip to content

add generic DT binding for RTS/CTS

Erwan Le Ray dri-devel linux-arm-kernel linux-media linux-serial lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 3 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: serial: add generic DT binding for announcing RTS/CTS linesDocumentation/devicetree/bindings/serial/st,stm32-uart.yaml+3 -13 replies
2/2serial: stm32: Use generic DT binding for announcing RTS/CTS linesdrivers/tty/serial/stm32-usart.c+3 -20 replies

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchRob Herring
1/2R-b
2/2

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/2] add generic DT binding for RTS/CTS

Add support of generic DT binding for annoucing RTS/CTS lines. The initial binding 'st,hw-flow-control' is not needed anymore since generic binding is available, but is kept for backward compatibility.

Erwan Le Ray (2):
dt-bindings: serial: add generic DT binding for announcing RTS/CTS
lines
serial: stm32: Use generic DT binding for announcing RTS/CTS lines

 Documentation/devicetree/bindings/serial/st,stm32-uart.yaml | 4 +++-
 drivers/tty/serial/stm32-usart.c                            | 5 +++--
 2 files changed, 6 insertions(+), 3 deletions(-)
Signature · 1 line
2.17.1