GCOV: Add config to check the preqequisites situation
Subsystems (2)
PATCH v6 1/1 GCOV: Add config to check the preqequisites situation
From: Cixi Geng <[email protected]>
Introduce new configuration option GCOV_PROFILE_PREREQS that can be used to check whether the prerequisites for enabling gcov profiling for specific files and directories are met.
Only add SERIAL_GCOV for an example.
--- drivers/tty/serial/Kconfig | 7 +++++++ drivers/tty/serial/Makefile | 1 + kernel/gcov/Kconfig | 10 ++++++++++ 3 files changed, 18 insertions(+)
drivers/tty/serial/Kconfig +7 -0
@@ -1566,3 +1566,10 @@ endmenu config SERIAL_MCTRL_GPIO tristate + +config SERIAL_GCOV + bool "Enable profile gcov for serial directory" + depends on GCOV_PROFILE_PREREQS + help + The SERIAL_GCOV will add Gcov profiling flags when kernel compiles. + Say 'Y' here if you want the gcov data for the serial directory,
drivers/tty/serial/Makefile +1 -0
@@ -3,6 +3,7 @@ # Makefile for the kernel serial device drivers. # +GCOV_PROFILE := $(CONFIG_SERIAL_GCOV) obj-$(CONFIG_SERIAL_CORE) += serial_core.o obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
kernel/gcov/Kconfig +10 -0
@@ -51,6 +51,16 @@ config GCOV_PROFILE_ALL larger and run slower. Also be sure to exclude files from profiling which are not linked to the kernel image to prevent linker errors. +config GCOV_PROFILE_PREREQS + bool "Profile Kernel for prereqs" + default y if GCOV_KERNEL && !COMPILE_TEST + help + This options activates profiling for the specified kernel modules. + + When some modules need Gcov data, enable this config, then configure + with gcov on the corresponding modules,The directories or files of + these modules will be added profiling flags after kernel compile. + choice prompt "Specify GCOV format" depends on GCOV_KERNEL
Signature · 1 line
2.17.1
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi All:
Does this patch need more modification?
Quoted 71 lines
发件人: [email protected] <[email protected]>
发送时间: 2020年6月18日 18:08
收件人: [email protected]; [email protected]; [email protected]; [email protected]; [email protected] 抄送: [email protected]; [email protected]; 耿慈熙 (Cixi Geng/10039)
主题: [PATCH V6] GCOV: Add config to check the preqequisites situationFrom: Cixi Geng <[email protected]>
Introduce new configuration option
GCOV_PROFILE_PREREQSthat can be used to check whether the prerequisites for enabling gcov profiling for specific files and directories are met.Only add
SERIAL_GCOVfor an example.Signed-off-by Cixi Geng <[email protected]>--- drivers/tty/serial/Kconfig | 7 +++++++ drivers/tty/serial/Makefile | 1 + kernel/gcov/Kconfig | 10 ++++++++++ 3 files changed, 18 insertions(+)drivers/tty/serial/Kconfig +7
-0@@ -1566,3 +1566,10 @@ endmenu config SERIAL_MCTRL_GPIO tristate + +config SERIAL_GCOV + bool "Enable profile gcov for serial directory" + depends on GCOV_PROFILE_PREREQS + help + The SERIAL_GCOV will add Gcov profiling flags when kernel compiles. + Say 'Y' here if you want the gcov data for the serial directory,drivers/tty/serial/Makefile +1
-0@@ -3,6 +3,7 @@ # Makefile for the kernel serial device drivers. # +GCOV_PROFILE := $(CONFIG_SERIAL_GCOV) obj-$(CONFIG_SERIAL_CORE) += serial_core.o obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.okernel/gcov/Kconfig +10
-1@@ -51,6 +51,16 @@ config GCOV_PROFILE_ALL larger and run slower. Also be sure to exclude files from profiling which are not linked to the kernel image to prevent linker errors. +config GCOV_PROFILE_PREREQS + bool "Profile Kernel for prereqs" + default y if GCOV_KERNEL && !COMPILE_TEST + help + This options activates profiling for the specified kernel modules. + + When some modules need Gcov data, enable this config, then configure + with gcov on the corresponding modules,The directories or files of + these modules will be added profiling flags after kernel compile. + choice prompt "Specify GCOV format" depends on GCOV_KERNEL --2.17.1
Peter Oberparleiter
maintainerQuoted 2 lines · Cixi Geng
Hi All:
Does this patch need more modification?
Yes. As it is now there's still a prompt for the prereq symbol. There should be no prompt for this symbol in the config dialog.
[...]
Quoted 8 lines
Quoted 8 lines
kernel/gcov/Kconfig +0
-0@@ -51,6 +51,16 @@ config GCOV_PROFILE_ALL larger and run slower. Also be sure to exclude files from profiling which are not linked to the kernel image to prevent linker errors.
Quoted 10 lines
kernel/gcov/Kconfig config GCOV_PROFILE_ALL · line 63
Quoted 10 lines
kernel/gcov/Kconfig +10
-0+config GCOV_PROFILE_PREREQS + bool "Profile Kernel for prereqs" + default y if GCOV_KERNEL && !COMPILE_TEST + help + This options activates profiling for the specified kernel modules. + + When some modules need Gcov data, enable this config, then configure + with gcov on the corresponding modules,The directories or files of + these modules will be added profiling flags after kernel compile. +
Replace the portion above with these lines:
config GCOV_PROFILE_PREREQS
def_bool y if GCOV_KERNEL && !COMPILE_TEST
Signature · 2 lines
Peter Oberparleiter Linux on Z Development - IBM Germany