Add regulator devfreq support to Panfrost
Subsystems (5)
v5 cover Add regulator devfreq support to Panfrost
Hi,
This serie cleans and adds regulator support to Panfrost devfreq. This is mostly based on comment for the freshly introduced lima devfreq.
We need to add regulator support because on Allwinner the GPU OPP table defines both frequencies and voltages.
First patches [01-07] should not change the actual behavior and introduce a proper panfrost_devfreq struct.
Regards,
Clément
Changes since v4:
- Fix missed a pfdev to &pfdev->devfreq during rebase
Changes since v3:
- Collect Steven Price reviewed-by tags
- Rebase on next/master (next-20200709)
Changes since v2:
- Collect Alyssa Rosenzweig reviewed-by tags
- Fix opp_set_regulator before adding opp_table (introduce in v2)
- Call err_fini in case opp_add_table failed
Changes since v1:
- Collect Steven Price reviewed-by tags
- Fix spinlock comment
- Drop OPP clock-name patch
- Drop device_property_test patch
- Add rename error labels patch
Clément Péron (14):
drm/panfrost: avoid static declaration
drm/panfrost: clean headers in devfreq
drm/panfrost: don't use pfdevfreq.busy_count to know if hw is idle drm/panfrost: introduce panfrost_devfreq struct drm/panfrost: use spinlock instead of atomic
drm/panfrost: properly handle error in probe
drm/panfrost: rename error labels in device_init drm/panfrost: move devfreq_init()/fini() in device drm/panfrost: dynamically alloc regulators
drm/panfrost: add regulators to devfreq
arm64: defconfig: Enable devfreq cooling device
arm64: dts: allwinner: h6: Add cooling map for GPU
[DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table [DO NOT MERGE] arm64: dts: allwinner: force GPU regulator to be always
.../dts/allwinner/sun50i-h6-beelink-gs1.dts | 1 + arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 102 ++++++++++ arch/arm64/configs/defconfig | 1 + drivers/gpu/drm/panfrost/panfrost_devfreq.c | 175 ++++++++++++------ drivers/gpu/drm/panfrost/panfrost_devfreq.h | 30 ++- drivers/gpu/drm/panfrost/panfrost_device.c | 61 +++--- drivers/gpu/drm/panfrost/panfrost_device.h | 14 +- drivers/gpu/drm/panfrost/panfrost_drv.c | 15 +- drivers/gpu/drm/panfrost/panfrost_job.c | 10 +- 9 files changed, 296 insertions(+), 113 deletions(-)
Signature · 1 line
2.25.1
PATCH v5 1/14 drm/panfrost: avoid static declaration
This declaration can be avoided so change it.
--- drivers/gpu/drm/panfrost/panfrost_devfreq.c | 38 ++++++++++----------- 1 file changed, 18 insertions(+), 20 deletions(-)
drivers/gpu/drm/panfrost/panfrost_devfreq.c +18 -20
@@ -14,7 +14,24 @@#include "panfrost_gpu.h" #include "panfrost_regs.h" -static void panfrost_devfreq_update_utilization (struct panfrost_device *pfdev); +static void panfrost_devfreq_update_utilization (struct panfrost_device *pfdev) +{ +ktime_t now; +ktime_t last; + +if (!pfdev->devfreq.devfreq) +return ; + + now =ktime_get (); + last = pfdev->devfreq.time_last_update; + +if (atomic_read (&pfdev->devfreq.busy_count) >0 ) + pfdev->devfreq.busy_time +=ktime_sub (now, last); +else + pfdev->devfreq.idle_time +=ktime_sub (now, last); + + pfdev->devfreq.time_last_update = now; +}static int panfrost_devfreq_target (struct device *dev,unsigned long *freq,u32 flags)
@@ -139,25 +156,6 @@ void panfrost_devfreq_suspend(struct panfrost_device *pfdev)devfreq_suspend_device (pfdev->devfreq.devfreq); } -static void panfrost_devfreq_update_utilization (struct panfrost_device *pfdev) -{ -ktime_t now; -ktime_t last; - -if (!pfdev->devfreq.devfreq) -return ; - - now =ktime_get (); - last = pfdev->devfreq.time_last_update; - -if (atomic_read (&pfdev->devfreq.busy_count) >0 ) - pfdev->devfreq.busy_time +=ktime_sub (now, last); -else - pfdev->devfreq.idle_time +=ktime_sub (now, last); - - pfdev->devfreq.time_last_update = now; -} -void panfrost_devfreq_record_busy (struct panfrost_device *pfdev) {panfrost_devfreq_update_utilization (pfdev);
Signature · 1 line
2.25.1
PATCH v5 2/14 drm/panfrost: clean headers in devfreq
In reply to Clément PéronDon't include not required headers and sort them.
--- drivers/gpu/drm/panfrost/panfrost_devfreq.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/gpu/drm/panfrost/panfrost_devfreq.c +2 -6
@@ -1,18 +1,14 @@// SPDX-License-Identifier: GPL-2.0 /* Copyright 2019 Collabora ltd. */ + +#include <linux/clk.h> #include <linux/devfreq.h> #include <linux/devfreq_cooling.h> #include <linux/platform_device.h> #include <linux/pm_opp.h> -#include <linux/clk.h> -#include <linux/regulator/consumer.h> #include "panfrost_device.h" #include "panfrost_devfreq.h" -#include "panfrost_features.h" -#include "panfrost_issues.h" -#include "panfrost_gpu.h" -#include "panfrost_regs.h" static void panfrost_devfreq_update_utilization (struct panfrost_device *pfdev) {
Signature · 1 line
2.25.1
PATCH v5 3/14 drm/panfrost: don't use pfdevfreq.busy_count to know if hw is idle
In reply to Clément PéronThis use devfreq variable that will be lock with spinlock in future patches. We should either introduce a function to access this one but as devfreq is optional let's just remove it.
--- drivers/gpu/drm/panfrost/panfrost_job.c | 4 ---- 1 file changed, 4 deletions(-)
drivers/gpu/drm/panfrost/panfrost_job.c +0 -4
@@ -581,10 +581,6 @@ int panfrost_job_is_idle(struct panfrost_device *pfdev)struct panfrost_job_slot *js = pfdev->js;int i; -/* Check whether the hardware is idle */ -if (atomic_read (&pfdev->devfreq.busy_count)) -return false; -for (i =0 ; i <NUM_JOB_SLOTS ; i++) {/* If there are any jobs in the HW queue, we're not idle */ if (atomic_read (&js->queue[i].sched.hw_rq_count))
Signature · 1 line
2.25.1
PATCH v5 4/14 drm/panfrost: introduce panfrost_devfreq struct
In reply to Clément PéronIntroduce a proper panfrost_devfreq to deal with devfreq variables.
--- drivers/gpu/drm/panfrost/panfrost_devfreq.c | 76 ++++++++++++--------- drivers/gpu/drm/panfrost/panfrost_devfreq.h | 20 +++++- drivers/gpu/drm/panfrost/panfrost_device.h | 11 +-- drivers/gpu/drm/panfrost/panfrost_job.c | 6 +- 4 files changed, 66 insertions(+), 47 deletions(-)
drivers/gpu/drm/panfrost/panfrost_devfreq.c +42 -34
@@ -10,23 +10,23 @@#include "panfrost_device.h" #include "panfrost_devfreq.h" -static void panfrost_devfreq_update_utilization (struct panfrost_device *pfdev) +static void panfrost_devfreq_update_utilization (struct panfrost_devfreq *pfdevfreq) {ktime_t now;ktime_t last; -if (!pfdev->devfreq.devfreq) +if (!pfdevfreq->devfreq)return ; now =ktime_get (); - last = pfdev->devfreq.time_last_update; + last = pfdevfreq->time_last_update; -if (atomic_read (&pfdev->devfreq.busy_count) >0 ) - pfdev->devfreq.busy_time +=ktime_sub (now, last); +if (atomic_read (&pfdevfreq->busy_count) >0 ) + pfdevfreq->busy_time +=ktime_sub (now, last);else - pfdev->devfreq.idle_time +=ktime_sub (now, last); + pfdevfreq->idle_time +=ktime_sub (now, last); - pfdev->devfreq.time_last_update = now; + pfdevfreq->time_last_update = now; } static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
@@ -47,30 +47,31 @@ static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,return 0 ; } -static void panfrost_devfreq_reset (struct panfrost_device *pfdev) +static void panfrost_devfreq_reset (struct panfrost_devfreq *pfdevfreq) { - pfdev->devfreq.busy_time =0 ; - pfdev->devfreq.idle_time =0 ; - pfdev->devfreq.time_last_update =ktime_get (); + pfdevfreq->busy_time =0 ; + pfdevfreq->idle_time =0 ; + pfdevfreq->time_last_update =ktime_get (); }static int panfrost_devfreq_get_dev_status (struct device *dev,struct devfreq_dev_status *status) {struct panfrost_device *pfdev =dev_get_drvdata (dev); +struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq; -panfrost_devfreq_update_utilization (pfdev); +panfrost_devfreq_update_utilization (pfdevfreq); status->current_frequency =clk_get_rate (pfdev->clock); - status->total_time =ktime_to_ns (ktime_add (pfdev->devfreq.busy_time, - pfdev->devfreq.idle_time)); + status->total_time =ktime_to_ns (ktime_add (pfdevfreq->busy_time, + pfdevfreq->idle_time)); - status->busy_time =ktime_to_ns (pfdev->devfreq.busy_time); + status->busy_time =ktime_to_ns (pfdevfreq->busy_time); -panfrost_devfreq_reset (pfdev); +panfrost_devfreq_reset (pfdevfreq); -dev_dbg (pfdev->dev,"busy %lu total %lu %lu %% freq %lu MHz\n" , status->busy_time, - status->total_time, +dev_dbg (pfdev->dev,"busy %lu total %lu %lu %% freq %lu MHz\n" , + status->busy_time, status->total_time, status->busy_time / (status->total_time /100 ), status->current_frequency /1000 /1000 );
@@ -91,6 +92,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)struct device *dev = &pfdev->pdev->dev;struct devfreq *devfreq;struct thermal_cooling_device *cooling; +struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq; ret =dev_pm_opp_of_add_table (dev);if (ret == -ENODEV )/* Optional, continue without devfreq */
@@ -98,7 +100,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)else if (ret)return ret; -panfrost_devfreq_reset (pfdev); +panfrost_devfreq_reset (pfdevfreq); cur_freq =clk_get_rate (pfdev->clock);
@@ -116,53 +118,59 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)dev_pm_opp_of_remove_table (dev);return PTR_ERR (devfreq); } - pfdev->devfreq.devfreq = devfreq; + pfdevfreq->devfreq = devfreq; cooling =of_devfreq_cooling_register (dev->of_node, devfreq);if (IS_ERR (cooling))DRM_DEV_INFO (dev,"Failed to register cooling device\n" );else - pfdev->devfreq.cooling = cooling; + pfdevfreq->cooling = cooling;return 0 ; }void panfrost_devfreq_fini (struct panfrost_device *pfdev) { -if (pfdev->devfreq.cooling) -devfreq_cooling_unregister (pfdev->devfreq.cooling); +struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq; + +if (pfdevfreq->cooling) +devfreq_cooling_unregister (pfdevfreq->cooling);dev_pm_opp_of_remove_table (&pfdev->pdev->dev); }void panfrost_devfreq_resume (struct panfrost_device *pfdev) { -if (!pfdev->devfreq.devfreq) +struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq; + +if (!pfdevfreq->devfreq)return ; -panfrost_devfreq_reset (pfdev); +panfrost_devfreq_reset (pfdevfreq); -devfreq_resume_device (pfdev->devfreq.devfreq); +devfreq_resume_device (pfdevfreq->devfreq); }void panfrost_devfreq_suspend (struct panfrost_device *pfdev) { -if (!pfdev->devfreq.devfreq) +struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq; + +if (!pfdevfreq->devfreq)return ; -devfreq_suspend_device (pfdev->devfreq.devfreq); +devfreq_suspend_device (pfdevfreq->devfreq); } -void panfrost_devfreq_record_busy (struct panfrost_device *pfdev) +void panfrost_devfreq_record_busy (struct panfrost_devfreq *pfdevfreq) { -panfrost_devfreq_update_utilization (pfdev); -atomic_inc (&pfdev->devfreq.busy_count); +panfrost_devfreq_update_utilization (pfdevfreq); +atomic_inc (&pfdevfreq->busy_count); } -void panfrost_devfreq_record_idle (struct panfrost_device *pfdev) +void panfrost_devfreq_record_idle (struct panfrost_devfreq *pfdevfreq) {int count; -panfrost_devfreq_update_utilization (pfdev); - count =atomic_dec_if_positive (&pfdev->devfreq.busy_count); +panfrost_devfreq_update_utilization (pfdevfreq); + count =atomic_dec_if_positive (&pfdevfreq->busy_count);WARN_ON (count <0 ); }
drivers/gpu/drm/panfrost/panfrost_devfreq.h +18 -2
@@ -4,13 +4,29 @@#ifndef __PANFROST_DEVFREQ_H__#define __PANFROST_DEVFREQ_H__ +#include <linux/ktime.h> + +struct devfreq ; +struct thermal_cooling_device ; + +struct panfrost_device ; + +struct panfrost_devfreq { +struct devfreq *devfreq; +struct thermal_cooling_device *cooling; +ktime_t busy_time; +ktime_t idle_time; +ktime_t time_last_update; +atomic_t busy_count; +}; +int panfrost_devfreq_init (struct panfrost_device *pfdev);void panfrost_devfreq_fini (struct panfrost_device *pfdev);void panfrost_devfreq_resume (struct panfrost_device *pfdev);void panfrost_devfreq_suspend (struct panfrost_device *pfdev); -void panfrost_devfreq_record_busy (struct panfrost_device *pfdev); -void panfrost_devfreq_record_idle (struct panfrost_device *pfdev); +void panfrost_devfreq_record_busy (struct panfrost_devfreq *devfreq); +void panfrost_devfreq_record_idle (struct panfrost_devfreq *devfreq);#endif /* __PANFROST_DEVFREQ_H__ */
drivers/gpu/drm/panfrost/panfrost_device.h +3 -8
@@ -13,6 +13,8 @@#include <drm/drm_mm.h> #include <drm/gpu_scheduler.h> +#include "panfrost_devfreq.h" +struct panfrost_device ;struct panfrost_mmu ;struct panfrost_job_slot ;
@@ -107,14 +109,7 @@ struct panfrost_device {struct list_head shrinker_list;struct shrinker shrinker; -struct { -struct devfreq *devfreq; -struct thermal_cooling_device *cooling; -ktime_t busy_time; -ktime_t idle_time; -ktime_t time_last_update; -atomic_t busy_count; - } devfreq; +struct panfrost_devfreq pfdevfreq; };struct panfrost_mmu {
drivers/gpu/drm/panfrost/panfrost_job.c +3 -3
@@ -145,7 +145,7 @@ static void panfrost_job_hw_submit(struct panfrost_job *job, int js)u64 jc_head = job->jc;int ret; -panfrost_devfreq_record_busy (pfdev); +panfrost_devfreq_record_busy (&pfdev->pfdevfreq); ret =pm_runtime_get_sync (pfdev->dev);if (ret <0 )
@@ -410,7 +410,7 @@ static void panfrost_job_timedout(struct drm_sched_job *sched_job)for (i =0 ; i <NUM_JOB_SLOTS ; i++) {if (pfdev->jobs[i]) {pm_runtime_put_noidle (pfdev->dev); -panfrost_devfreq_record_idle (pfdev); +panfrost_devfreq_record_idle (&pfdev->pfdevfreq); pfdev->jobs[i] =NULL ; } }
@@ -478,7 +478,7 @@ static irqreturn_t panfrost_job_irq_handler(int irq, void *data) pfdev->jobs[j] =NULL ;panfrost_mmu_as_put (pfdev, &job->file_priv->mmu); -panfrost_devfreq_record_idle (pfdev); +panfrost_devfreq_record_idle (&pfdev->pfdevfreq);dma_fence_signal_locked (job->done_fence);pm_runtime_put_autosuspend (pfdev->dev);
Signature · 1 line
2.25.1
PATCH v5 5/14 drm/panfrost: use spinlock instead of atomic
In reply to Clément PéronConvert busy_count to a simple int protected by spinlock.
--- drivers/gpu/drm/panfrost/panfrost_devfreq.c | 43 +++++++++++++++------ drivers/gpu/drm/panfrost/panfrost_devfreq.h | 9 ++++- 2 files changed, 40 insertions(+), 12 deletions(-)
drivers/gpu/drm/panfrost/panfrost_devfreq.c +32 -11
@@ -12,16 +12,12 @@static void panfrost_devfreq_update_utilization (struct panfrost_devfreq *pfdevfreq) { -ktime_t now; -ktime_t last; - -if (!pfdevfreq->devfreq) -return ; +ktime_t now, last; now =ktime_get (); last = pfdevfreq->time_last_update; -if (atomic_read (&pfdevfreq->busy_count) >0 ) +if (pfdevfreq->busy_count >0 ) pfdevfreq->busy_time +=ktime_sub (now, last);else pfdevfreq->idle_time +=ktime_sub (now, last);
@@ -59,10 +55,14 @@ static int panfrost_devfreq_get_dev_status(struct device *dev, {struct panfrost_device *pfdev =dev_get_drvdata (dev);struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq; +unsigned long irqflags; + + status->current_frequency =clk_get_rate (pfdev->clock); + +spin_lock_irqsave (&pfdevfreq->lock, irqflags);panfrost_devfreq_update_utilization (pfdevfreq); - status->current_frequency =clk_get_rate (pfdev->clock); status->total_time =ktime_to_ns (ktime_add (pfdevfreq->busy_time, pfdevfreq->idle_time));
@@ -70,6 +70,8 @@ static int panfrost_devfreq_get_dev_status(struct device *dev,panfrost_devfreq_reset (pfdevfreq); +spin_unlock_irqrestore (&pfdevfreq->lock, irqflags); + dev_dbg(pfdev->dev, "busy %lu total %lu %lu %% freq %lu MHz\n", status->busy_time, status->total_time, status->busy_time / (status->total_time / 100),
@@ -100,6 +102,8 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)else if (ret)return ret; +spin_lock_init (&pfdevfreq->lock); +panfrost_devfreq_reset (pfdevfreq); cur_freq =clk_get_rate (pfdev->clock);
@@ -162,15 +166,32 @@ void panfrost_devfreq_suspend(struct panfrost_device *pfdev)void panfrost_devfreq_record_busy (struct panfrost_devfreq *pfdevfreq) { +unsigned long irqflags; + +if (!pfdevfreq->devfreq) +return ; + +spin_lock_irqsave (&pfdevfreq->lock, irqflags); +panfrost_devfreq_update_utilization (pfdevfreq); -atomic_inc (&pfdevfreq->busy_count); + + pfdevfreq->busy_count++; + +spin_unlock_irqrestore (&pfdevfreq->lock, irqflags); }void panfrost_devfreq_record_idle (struct panfrost_devfreq *pfdevfreq) { -int count; +unsigned long irqflags; + +if (!pfdevfreq->devfreq) +return ; + +spin_lock_irqsave (&pfdevfreq->lock, irqflags);panfrost_devfreq_update_utilization (pfdevfreq); - count =atomic_dec_if_positive (&pfdevfreq->busy_count); -WARN_ON (count <0 ); + +WARN_ON (--pfdevfreq->busy_count <0 ); + +spin_unlock_irqrestore (&pfdevfreq->lock, irqflags); }
drivers/gpu/drm/panfrost/panfrost_devfreq.h +8 -1
@@ -4,6 +4,7 @@#ifndef __PANFROST_DEVFREQ_H__#define __PANFROST_DEVFREQ_H__ +#include <linux/spinlock.h> #include <linux/ktime.h> struct devfreq ;
@@ -14,10 +15,16 @@ struct panfrost_device;struct panfrost_devfreq {struct devfreq *devfreq;struct thermal_cooling_device *cooling; +ktime_t busy_time;ktime_t idle_time;ktime_t time_last_update; -atomic_t busy_count; +int busy_count; +/* +* Protect busy_time, idle_time, time_last_update and busy_count +* because these can be updated concurrently between multiple jobs. +*/ +spinlock_t lock; };int panfrost_devfreq_init (struct panfrost_device *pfdev);
Signature · 1 line
2.25.1
PATCH v5 6/14 drm/panfrost: properly handle error in probe
In reply to Clément PéronIntroduce a boolean to know if opp table has been added.
With this, we can call panfrost_devfreq_fini() in case of error and release what has been initialised.
--- drivers/gpu/drm/panfrost/panfrost_devfreq.c | 25 ++++++++++++++++----- drivers/gpu/drm/panfrost/panfrost_devfreq.h | 1 + 2 files changed, 20 insertions(+), 6 deletions(-)
drivers/gpu/drm/panfrost/panfrost_devfreq.c +19 -6
@@ -101,6 +101,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)return 0 ; else if (ret) return ret; + pfdevfreq->opp_of_table_added = true; spin_lock_init(&pfdevfreq->lock);
@@ -109,8 +110,10 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev) cur_freq =clk_get_rate (pfdev->clock); opp =devfreq_recommended_opp (dev, &cur_freq,0 ); -if (IS_ERR (opp)) -return PTR_ERR (opp); +if (IS_ERR (opp)) { + ret =PTR_ERR (opp); + goto err_fini; + } panfrost_devfreq_profile.initial_freq = cur_freq;dev_pm_opp_put (opp);
@@ -119,8 +122,8 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev) DEVFREQ_GOV_SIMPLE_ONDEMAND, NULL);if (IS_ERR (devfreq)) {DRM_DEV_ERROR (dev,"Couldn't initialize GPU devfreq\n" ); -dev_pm_opp_of_remove_table (dev); -return PTR_ERR (devfreq); + ret =PTR_ERR (devfreq); + goto err_fini; } pfdevfreq->devfreq = devfreq;
@@ -131,15 +134,25 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev) pfdevfreq->cooling = cooling;return 0 ; + +err_fini: +panfrost_devfreq_fini (pfdev); +return ret; }void panfrost_devfreq_fini (struct panfrost_device *pfdev) {struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq; -if (pfdevfreq->cooling) +if (pfdevfreq->cooling) {devfreq_cooling_unregister (pfdevfreq->cooling); -dev_pm_opp_of_remove_table (&pfdev->pdev->dev); + pfdevfreq->cooling =NULL ; + } + +if (pfdevfreq->opp_of_table_added) { +dev_pm_opp_of_remove_table (&pfdev->pdev->dev); + pfdevfreq->opp_of_table_added = false; + } }void panfrost_devfreq_resume (struct panfrost_device *pfdev)
drivers/gpu/drm/panfrost/panfrost_devfreq.h +1 -0
@@ -15,6 +15,7 @@ struct panfrost_device;struct panfrost_devfreq {struct devfreq *devfreq;struct thermal_cooling_device *cooling; +bool opp_of_table_added;ktime_t busy_time;ktime_t idle_time;
Signature · 1 line
2.25.1
PATCH v5 7/14 drm/panfrost: rename error labels in device_init
In reply to Clément PéronRename goto labels in device_init it will be easier to maintain.
--- drivers/gpu/drm/panfrost/panfrost_device.c | 30 +++++++++++----------- 1 file changed, 15 insertions(+), 15 deletions(-)
drivers/gpu/drm/panfrost/panfrost_device.c +15 -15
@@ -216,56 +216,56 @@ int panfrost_device_init(struct panfrost_device *pfdev) err =panfrost_regulator_init (pfdev);if (err) - goto err_out0; + goto out_clk; err =panfrost_reset_init (pfdev);if (err) {dev_err (pfdev->dev,"reset init failed %d\n" , err); - goto err_out1; + goto out_regulator; } err =panfrost_pm_domain_init (pfdev);if (err) - goto err_out2; + goto out_reset; res =platform_get_resource (pfdev->pdev,IORESOURCE_MEM ,0 ); pfdev->iomem =devm_ioremap_resource (pfdev->dev, res);if (IS_ERR (pfdev->iomem)) {dev_err (pfdev->dev,"failed to ioremap iomem\n" ); err =PTR_ERR (pfdev->iomem); - goto err_out3; + goto out_pm_domain; } err =panfrost_gpu_init (pfdev);if (err) - goto err_out3; + goto out_pm_domain; err =panfrost_mmu_init (pfdev);if (err) - goto err_out4; + goto out_gpu; err =panfrost_job_init (pfdev);if (err) - goto err_out5; + goto out_mmu; err =panfrost_perfcnt_init (pfdev);if (err) - goto err_out6; + goto out_job;return 0 ; -err_out6: +out_job:panfrost_job_fini (pfdev); -err_out5: +out_mmu:panfrost_mmu_fini (pfdev); -err_out4: +out_gpu:panfrost_gpu_fini (pfdev); -err_out3: +out_pm_domain:panfrost_pm_domain_fini (pfdev); -err_out2: +out_reset:panfrost_reset_fini (pfdev); -err_out1: +out_regulator:panfrost_regulator_fini (pfdev); -err_out0: +out_clk:panfrost_clk_fini (pfdev);return err; }
Signature · 1 line
2.25.1
PATCH v5 8/14 drm/panfrost: move devfreq_init()/fini() in device
In reply to Clément PéronLater we will introduce devfreq probing regulator if they are present. As regulator should be probe only one time we need to get this logic in the device_init().
panfrost_device is already taking care of devfreq_resume() and devfreq_suspend(), so it's not totally illogic to move the devfreq_init() and devfreq_fini() here.
--- drivers/gpu/drm/panfrost/panfrost_device.c | 12 +++++++++++- drivers/gpu/drm/panfrost/panfrost_drv.c | 15 ++------------- 2 files changed, 13 insertions(+), 14 deletions(-)
drivers/gpu/drm/panfrost/panfrost_device.c +11 -1
@@ -214,9 +214,16 @@ int panfrost_device_init(struct panfrost_device *pfdev)return err; } + err =panfrost_devfreq_init (pfdev); +if (err) { +if (err != -EPROBE_DEFER ) +dev_err (pfdev->dev,"devfreq init failed %d\n" , err); + goto out_clk; + } + err =panfrost_regulator_init (pfdev);if (err) - goto out_clk; + goto out_devfreq; err =panfrost_reset_init (pfdev);if (err) {
@@ -265,6 +272,8 @@ int panfrost_device_init(struct panfrost_device *pfdev)panfrost_reset_fini (pfdev); out_regulator:panfrost_regulator_fini (pfdev); +out_devfreq: +panfrost_devfreq_fini (pfdev); out_clk:panfrost_clk_fini (pfdev);return err;
@@ -278,6 +287,7 @@ void panfrost_device_fini(struct panfrost_device *pfdev)panfrost_gpu_fini (pfdev);panfrost_pm_domain_fini (pfdev);panfrost_reset_fini (pfdev); +panfrost_devfreq_fini (pfdev);panfrost_regulator_fini (pfdev);panfrost_clk_fini (pfdev); }
drivers/gpu/drm/panfrost/panfrost_drv.c +2 -13
@@ -14,7 +14,6 @@#include <drm/drm_utils.h> #include "panfrost_device.h" -#include "panfrost_devfreq.h" #include "panfrost_gem.h" #include "panfrost_mmu.h" #include "panfrost_job.h"
@@ -606,13 +605,6 @@ static int panfrost_probe(struct platform_device *pdev) goto err_out0; } - err =panfrost_devfreq_init (pfdev); -if (err) { -if (err != -EPROBE_DEFER ) -dev_err (&pdev->dev,"Fatal error during devfreq init\n" ); - goto err_out1; - } -pm_runtime_set_active (pfdev->dev);pm_runtime_mark_last_busy (pfdev->dev);pm_runtime_enable (pfdev->dev);
@@ -625,16 +617,14 @@ static int panfrost_probe(struct platform_device *pdev)*/ err =drm_dev_register (ddev,0 );if (err <0 ) - goto err_out2; + goto err_out1;panfrost_gem_shrinker_init (ddev);return 0 ; -err_out2: -pm_runtime_disable (pfdev->dev); -panfrost_devfreq_fini (pfdev); err_out1: +pm_runtime_disable (pfdev->dev);panfrost_device_fini (pfdev); err_out0:drm_dev_put (ddev);
@@ -650,7 +640,6 @@ static int panfrost_remove(struct platform_device *pdev)panfrost_gem_shrinker_cleanup (ddev);pm_runtime_get_sync (pfdev->dev); -panfrost_devfreq_fini (pfdev);panfrost_device_fini (pfdev);pm_runtime_put_sync_suspend (pfdev->dev);pm_runtime_disable (pfdev->dev);
Signature · 1 line
2.25.1
PATCH v5 9/14 drm/panfrost: dynamically alloc regulators
In reply to Clément PéronWe will later introduce regulators managed by OPP.
Only alloc regulators when it's needed. This also help use to release the regulators only when they are allocated.
--- drivers/gpu/drm/panfrost/panfrost_device.c | 14 +++++++++----- drivers/gpu/drm/panfrost/panfrost_device.h | 3 +-- 2 files changed, 10 insertions(+), 7 deletions(-)
drivers/gpu/drm/panfrost/panfrost_device.c +9 -5
@@ -90,9 +90,11 @@ static int panfrost_regulator_init(struct panfrost_device *pfdev) {int ret, i; -if (WARN (pfdev->comp->num_supplies >ARRAY_SIZE (pfdev->regulators), -"Too many supplies in compatible structure.\n" )) -return -EINVAL ; + pfdev->regulators =devm_kcalloc (pfdev->dev, pfdev->comp->num_supplies, +sizeof (*pfdev->regulators), +GFP_KERNEL ); +if (!pfdev->regulators) +return -ENOMEM ;for (i =0 ; i < pfdev->comp->num_supplies; i++) pfdev->regulators[i].supply = pfdev->comp->supply_names[i];
@@ -119,8 +121,10 @@ static int panfrost_regulator_init(struct panfrost_device *pfdev)static void panfrost_regulator_fini (struct panfrost_device *pfdev) { -regulator_bulk_disable (pfdev->comp->num_supplies, - pfdev->regulators); +if (!pfdev->regulators) +return ; + +regulator_bulk_disable (pfdev->comp->num_supplies, pfdev->regulators); }static void panfrost_pm_domain_fini (struct panfrost_device *pfdev)
drivers/gpu/drm/panfrost/panfrost_device.h +1 -2
@@ -22,7 +22,6 @@ struct panfrost_job;struct panfrost_perfcnt ;#define NUM_JOB_SLOTS 3 -#define MAX_REGULATORS 2#define MAX_PM_DOMAINS 3struct panfrost_features {
@@ -81,7 +80,7 @@ struct panfrost_device {void __iomem *iomem;struct clk *clock;struct clk *bus_clock; -struct regulator_bulk_data regulators[MAX_REGULATORS ]; +struct regulator_bulk_data *regulators;struct reset_control *rstc;/* pm_domains for devices with more than one. */ struct device *pm_domain_devs[MAX_PM_DOMAINS ];
Signature · 1 line
2.25.1
PATCH v5 10/14 drm/panfrost: add regulators to devfreq
In reply to Clément PéronSome OPP tables specify voltage for each frequency. Devfreq can handle these regulators but they should be get only 1 time to avoid issue and know who is in charge.
If OPP table is probe don't init regulator.
--- drivers/gpu/drm/panfrost/panfrost_devfreq.c | 29 ++++++++++++++++++--- drivers/gpu/drm/panfrost/panfrost_devfreq.h | 2 ++ drivers/gpu/drm/panfrost/panfrost_device.c | 9 ++++--- 3 files changed, 33 insertions(+), 7 deletions(-)
drivers/gpu/drm/panfrost/panfrost_devfreq.c +25 -4
@@ -93,14 +93,30 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)unsigned long cur_freq;struct device *dev = &pfdev->pdev->dev;struct devfreq *devfreq; +struct opp_table *opp_table;struct thermal_cooling_device *cooling;struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq; + opp_table =dev_pm_opp_set_regulators (dev, pfdev->comp->supply_names, + pfdev->comp->num_supplies); +if (IS_ERR (opp_table)) { + ret =PTR_ERR (opp_table); +/* Continue if the optional regulator is missing */ +if (ret != -ENODEV ) { +DRM_DEV_ERROR (dev,"Couldn't set OPP regulators\n" ); + goto err_fini; + } + }else { + pfdevfreq->regulators_opp_table = opp_table; + } + ret =dev_pm_opp_of_add_table (dev); -if (ret == -ENODEV )/* Optional, continue without devfreq */ -return 0 ; -else if (ret) -return ret; +if (ret) { +/* Optional, continue without devfreq */ +if (ret == -ENODEV ) + ret =0 ; + goto err_fini; + } pfdevfreq->opp_of_table_added = true;spin_lock_init (&pfdevfreq->lock);
@@ -153,6 +169,11 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev)dev_pm_opp_of_remove_table (&pfdev->pdev->dev); pfdevfreq->opp_of_table_added = false; } + +if (pfdevfreq->regulators_opp_table) { +dev_pm_opp_put_regulators (pfdevfreq->regulators_opp_table); + pfdevfreq->regulators_opp_table =NULL ; + } }void panfrost_devfreq_resume (struct panfrost_device *pfdev)
drivers/gpu/drm/panfrost/panfrost_devfreq.h +2 -0
@@ -8,12 +8,14 @@#include <linux/ktime.h> struct devfreq ; +struct opp_table ;struct thermal_cooling_device ;struct panfrost_device ;struct panfrost_devfreq {struct devfreq *devfreq; +struct opp_table *regulators_opp_table;struct thermal_cooling_device *cooling;bool opp_of_table_added;
drivers/gpu/drm/panfrost/panfrost_device.c +6 -3
@@ -225,9 +225,12 @@ int panfrost_device_init(struct panfrost_device *pfdev) goto out_clk; } - err =panfrost_regulator_init (pfdev); -if (err) - goto out_devfreq; +/* OPP will handle regulators */ +if (!pfdev->pfdevfreq.opp_of_table_added) { + err =panfrost_regulator_init (pfdev); +if (err) + goto out_devfreq; + } err =panfrost_reset_init (pfdev);if (err) {
Signature · 1 line
2.25.1
PATCH v5 11/14 arm64: defconfig: Enable devfreq cooling device
In reply to Clément PéronDevfreq cooling device framework is used in Panfrost to throttle GPU in order to regulate its temperature.
Enable this driver for ARM64 SoC.
--- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -504,6 +504,7 @@ CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_INA3221=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y +CONFIG_DEVFREQ_THERMAL=y CONFIG_THERMAL_EMULATION=y CONFIG_QORIQ_THERMAL=m CONFIG_SUN8I_THERMAL=y
Signature · 1 line
2.25.1
PATCH v5 12/14 arm64: dts: allwinner: h6: Add cooling map for GPU
In reply to Clément PéronAdd a simple cooling map for the GPU.
--- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 22 ++++++++++++++++++++ 1 file changed, 22 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +22 -0
@@ -175,6 +175,7 @@ gpu: gpu@1800000 { clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>; clock-names = "core", "bus"; resets = <&ccu RST_BUS_GPU>; + #cooling-cells = <2>; status = "disabled"; };
@@ -1013,6 +1014,27 @@ gpu-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 1>; + + trips { + gpu_alert: gpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu-crit { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_alert>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; };
Signature · 1 line
2.25.1
PATCH v5 13/14 arm64: dts: allwinner: h6: Add GPU OPP table
In reply to Clément PéronAdd an Operating Performance Points table for the GPU to enable Dynamic Voltage & Frequency Scaling on the H6.
The voltage range is set with minival voltage set to the target and the maximal voltage set to 1.2V. This allow DVFS framework to work properly on board with fixed regulator.
--- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 80 ++++++++++++++++++++ 1 file changed, 80 insertions(+)
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +80 -0
@@ -175,6 +175,7 @@ gpu: gpu@1800000 { clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>; clock-names = "core", "bus"; resets = <&ccu RST_BUS_GPU>; + operating-points-v2 = <&gpu_opp_table>; #cooling-cells = <2>; status = "disabled"; };
@@ -1037,4 +1038,83 @@ map0 { }; }; }; + + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp@216000000 { + opp-hz = /bits/ 64 <216000000>; + opp-microvolt = <810000 810000 1200000>; + }; + + opp@264000000 { + opp-hz = /bits/ 64 <264000000>; + opp-microvolt = <810000 810000 1200000>; + }; + + opp@312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <810000 810000 1200000>; + }; + + opp@336000000 { + opp-hz = /bits/ 64 <336000000>; + opp-microvolt = <810000 810000 1200000>; + }; + + opp@360000000 { + opp-hz = /bits/ 64 <360000000>; + opp-microvolt = <820000 820000 1200000>; + }; + + opp@384000000 { + opp-hz = /bits/ 64 <384000000>; + opp-microvolt = <830000 830000 1200000>; + }; + + opp@408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <840000 840000 1200000>; + }; + + opp@420000000 { + opp-hz = /bits/ 64 <420000000>; + opp-microvolt = <850000 850000 1200000>; + }; + + opp@432000000 { + opp-hz = /bits/ 64 <432000000>; + opp-microvolt = <860000 860000 1200000>; + }; + + opp@456000000 { + opp-hz = /bits/ 64 <456000000>; + opp-microvolt = <870000 870000 1200000>; + }; + + opp@504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <890000 890000 1200000>; + }; + + opp@540000000 { + opp-hz = /bits/ 64 <540000000>; + opp-microvolt = <910000 910000 1200000>; + }; + + opp@576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-microvolt = <930000 930000 1200000>; + }; + + opp@624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-microvolt = <950000 950000 1200000>; + }; + + opp@756000000 { + opp-hz = /bits/ 64 <756000000>; + opp-microvolt = <1040000 1040000 1200000>; + }; + }; };
Signature · 1 line
2.25.1
PATCH v5 14/14 arm64: dts: allwinner: force GPU regulator to be always
In reply to Clément Péron--- arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +1 -0
@@ -245,6 +245,7 @@ reg_dcdca: dcdca { }; reg_dcdcc: dcdcc { + regulator-always-on; regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>;
Signature · 1 line
2.25.1
Rob Herring
maintainerQuoted 35 lines · Clément Péron
Hi,
This serie cleans and adds regulator support to Panfrost devfreq. This is mostly based on comment for the freshly introduced lima devfreq.
We need to add regulator support because on Allwinner the GPU OPP table defines both frequencies and voltages.
First patches [01-07] should not change the actual behavior and introduce a proper
panfrost_devfreqstruct.Regards,
ClémentChanges since v4:
- Fix missed a pfdev to&pfdev->devfreqduring rebaseChanges since v3:
- Collect Steven Price reviewed-by tags
- Rebase on next/master (next-20200709)Changes since v2:
- Collect Alyssa Rosenzweig reviewed-by tags
- Fixopp_set_regulatorbefore addingopp_table(introduce in v2)
- Callerr_finiin caseopp_add_tablefailedChanges since v1:
- Collect Steven Price reviewed-by tags
- Fix spinlock comment
- Drop OPP clock-name patch
- Dropdevice_property_testpatch
- Add rename error labels patch
Quoted 15 lines
Clément Péron (14):
drm/panfrost: avoid static declaration
drm/panfrost: clean headers in devfreq
drm/panfrost: don't use pfdevfreq.busy_count to know if hw is idle drm/panfrost: introducepanfrost_devfreqstruct drm/panfrost: use spinlock instead of atomic
drm/panfrost: properly handle error in probe
drm/panfrost: rename error labels indevice_initdrm/panfrost: move devfreq_init()/fini() in device drm/panfrost: dynamically alloc regulators
drm/panfrost: add regulators to devfreq
arm64: defconfig: Enable devfreq cooling device
arm64: dts: allwinner: h6: Add cooling map for GPU
[DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table [DO NOT MERGE] arm64: dts: allwinner: force GPU regulator to be always
Patches 1-10 applied to drm-misc.
Rob
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Rob,
Quoted 53 lines · Rob Herring
Quoted 35 lines · Clément Péron
Hi,
This serie cleans and adds regulator support to Panfrost devfreq. This is mostly based on comment for the freshly introduced lima devfreq.
We need to add regulator support because on Allwinner the GPU OPP table defines both frequencies and voltages.
First patches [01-07] should not change the actual behavior and introduce a proper
panfrost_devfreqstruct.Regards,
ClémentChanges since v4:
- Fix missed a pfdev to&pfdev->devfreqduring rebaseChanges since v3:
- Collect Steven Price reviewed-by tags
- Rebase on next/master (next-20200709)Changes since v2:
- Collect Alyssa Rosenzweig reviewed-by tags
- Fixopp_set_regulatorbefore addingopp_table(introduce in v2)
- Callerr_finiin caseopp_add_tablefailedChanges since v1:
- Collect Steven Price reviewed-by tags
- Fix spinlock comment
- Drop OPP clock-name patch
- Dropdevice_property_testpatch
- Add rename error labels patchQuoted 15 lines
Clément Péron (14):
drm/panfrost: avoid static declaration
drm/panfrost: clean headers in devfreq
drm/panfrost: don't use pfdevfreq.busy_count to know if hw is idle drm/panfrost: introducepanfrost_devfreqstruct drm/panfrost: use spinlock instead of atomic
drm/panfrost: properly handle error in probe
drm/panfrost: rename error labels indevice_initdrm/panfrost: move devfreq_init()/fini() in device drm/panfrost: dynamically alloc regulators
drm/panfrost: add regulators to devfreq
arm64: defconfig: Enable devfreq cooling device
arm64: dts: allwinner: h6: Add cooling map for GPU
[DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table [DO NOT MERGE] arm64: dts: allwinner: force GPU regulator to be always
Quoted 1 line
Patches 1-10 applied to drm-misc.
This serie has been superseded by v5.
Could you apply the v5 instead.
Thanks
Clément
Quoted 2 lines
Rob
Quoted 57 lines · Clément Péron
Hi Rob,
Quoted 53 lines · Rob Herring
Quoted 50 lines · Clément Péron
Hi,
This serie cleans and adds regulator support to Panfrost devfreq. This is mostly based on comment for the freshly introduced lima devfreq.
We need to add regulator support because on Allwinner the GPU OPP table defines both frequencies and voltages.
First patches [01-07] should not change the actual behavior and introduce a proper
panfrost_devfreqstruct.Regards,
ClémentChanges since v4:
- Fix missed a pfdev to&pfdev->devfreqduring rebaseChanges since v3:
- Collect Steven Price reviewed-by tags
- Rebase on next/master (next-20200709)Changes since v2:
- Collect Alyssa Rosenzweig reviewed-by tags
- Fixopp_set_regulatorbefore addingopp_table(introduce in v2)
- Callerr_finiin caseopp_add_tablefailedChanges since v1:
- Collect Steven Price reviewed-by tags
- Fix spinlock comment
- Drop OPP clock-name patch
- Dropdevice_property_testpatch
- Add rename error labels patchClément Péron (14):
drm/panfrost: avoid static declaration
drm/panfrost: clean headers in devfreq
drm/panfrost: don't use pfdevfreq.busy_count to know if hw is idle drm/panfrost: introducepanfrost_devfreqstruct drm/panfrost: use spinlock instead of atomic
drm/panfrost: properly handle error in probe
drm/panfrost: rename error labels indevice_initdrm/panfrost: move devfreq_init()/fini() in device drm/panfrost: dynamically alloc regulators
drm/panfrost: add regulators to devfreq
arm64: defconfig: Enable devfreq cooling device
arm64: dts: allwinner: h6: Add cooling map for GPU
[DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table [DO NOT MERGE] arm64: dts: allwinner: force GPU regulator to be always
Quoted 5 lines
Quoted 1 line
Patches 1-10 applied to drm-misc.
This serie has been superseded by v5.
Could you apply the v5 instead.
Oups forget my email
I got an issue with my gmail...
Thanks
Quoted 6 lines
Thanks
ClémentQuoted 2 lines
Rob
Quoted 60 lines · Clément Péron
Quoted 59 lines · Clément Péron
Hi Rob,
Quoted 54 lines · Rob Herring
Quoted 35 lines · Clément Péron
Hi,
This serie cleans and adds regulator support to Panfrost devfreq. This is mostly based on comment for the freshly introduced lima devfreq.
We need to add regulator support because on Allwinner the GPU OPP table defines both frequencies and voltages.
First patches [01-07] should not change the actual behavior and introduce a proper
panfrost_devfreqstruct.Regards,
ClémentChanges since v4:
- Fix missed a pfdev to&pfdev->devfreqduring rebaseChanges since v3:
- Collect Steven Price reviewed-by tags
- Rebase on next/master (next-20200709)Changes since v2:
- Collect Alyssa Rosenzweig reviewed-by tags
- Fixopp_set_regulatorbefore addingopp_table(introduce in v2)
- Callerr_finiin caseopp_add_tablefailedChanges since v1:
- Collect Steven Price reviewed-by tags
- Fix spinlock comment
- Drop OPP clock-name patch
- Dropdevice_property_testpatch
- Add rename error labels patchQuoted 15 lines
Clément Péron (14):
drm/panfrost: avoid static declaration
drm/panfrost: clean headers in devfreq
drm/panfrost: don't use pfdevfreq.busy_count to know if hw is idle drm/panfrost: introducepanfrost_devfreqstruct drm/panfrost: use spinlock instead of atomic
drm/panfrost: properly handle error in probe
drm/panfrost: rename error labels indevice_initdrm/panfrost: move devfreq_init()/fini() in device drm/panfrost: dynamically alloc regulators
drm/panfrost: add regulators to devfreq
arm64: defconfig: Enable devfreq cooling device
arm64: dts: allwinner: h6: Add cooling map for GPU
[DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table [DO NOT MERGE] arm64: dts: allwinner: force GPU regulator to be alwaysPatches 1-10 applied to drm-misc.
Quoted 7 lines
Quoted 3 lines
This serie has been superseded by v5.
Could you apply the v5 instead.
Oups forget my email
I got an issue with my gmail...
drm-misc is a non-rebasing tree (because it's got lots of maintainers/committers). Which means we need fixup patches now.
Not that currently drm-misc-next isn't in linux-next because of the merge window, so just rebasing on top of linux-next wont work (at least not until -rc1 is out). You can get the tree here meanwhile:
https://cgit.freedesktop.org/drm/drm-misc/
Cheers, Daniel
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Rob Herring
maintainerQuoted 70 lines · Daniel Vetter
Quoted 60 lines · Clément Péron
Quoted 59 lines · Clément Péron
Hi Rob,
Quoted 54 lines · Rob Herring
Quoted 35 lines · Clément Péron
Hi,
This serie cleans and adds regulator support to Panfrost devfreq. This is mostly based on comment for the freshly introduced lima devfreq.
We need to add regulator support because on Allwinner the GPU OPP table defines both frequencies and voltages.
First patches [01-07] should not change the actual behavior and introduce a proper
panfrost_devfreqstruct.Regards,
ClémentChanges since v4:
- Fix missed a pfdev to&pfdev->devfreqduring rebaseChanges since v3:
- Collect Steven Price reviewed-by tags
- Rebase on next/master (next-20200709)Changes since v2:
- Collect Alyssa Rosenzweig reviewed-by tags
- Fixopp_set_regulatorbefore addingopp_table(introduce in v2)
- Callerr_finiin caseopp_add_tablefailedChanges since v1:
- Collect Steven Price reviewed-by tags
- Fix spinlock comment
- Drop OPP clock-name patch
- Dropdevice_property_testpatch
- Add rename error labels patchQuoted 15 lines
Clément Péron (14):
drm/panfrost: avoid static declaration
drm/panfrost: clean headers in devfreq
drm/panfrost: don't use pfdevfreq.busy_count to know if hw is idle drm/panfrost: introducepanfrost_devfreqstruct drm/panfrost: use spinlock instead of atomic
drm/panfrost: properly handle error in probe
drm/panfrost: rename error labels indevice_initdrm/panfrost: move devfreq_init()/fini() in device drm/panfrost: dynamically alloc regulators
drm/panfrost: add regulators to devfreq
arm64: defconfig: Enable devfreq cooling device
arm64: dts: allwinner: h6: Add cooling map for GPU
[DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table [DO NOT MERGE] arm64: dts: allwinner: force GPU regulator to be alwaysPatches 1-10 applied to drm-misc.
Quoted 7 lines
Quoted 3 lines
This serie has been superseded by v5.
Could you apply the v5 instead.
Oups forget my email
I got an issue with my gmail...
Quoted 8 lines
drm-misc is a non-rebasing tree (because it's got lots of maintainers/committers). Which means we need fixup patches now.
Not that currently drm-misc-next isn't in linux-next because of the merge window, so just rebasing on top of linux-next wont work (at least not until -rc1 is out). You can get the tree here meanwhile:
I applied v5 so there's nothing to do. The gmail issue was gmail put v4 and v5 in the same conversion (under v4) which it likes to do somewhat randomly and with no regard to actual threading. :(
Rob
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel