Provide basic driver to control Arm R5 co-processor found on Xilinx ZynqMP

The driver was tested on Xilinx ZynqMP QEMU

For sake of ease of review, only support ZynqMP. Once accepted, then add support for Versal platform and R5 loading onto OCM.

v2:
- remove domain struct
v3:
- add xilinx-related platform mgmt fn's instead of wrapping around function pointer in xilinx eemi ops struct
- update zynqmp_r5 yaml parsing to not raise warnings for extra information in children of R5 node. The warning "node has a unit name, but no reg or ranges property" will still be raised though as this particular node is needed to describe the '#address-cells' and '#size-cells' information.
v4:
- add default values for enums
- fix formatting as per checkpatch.pl --strict. Note that 1 warning and 1 check are still raised as each is due to fixing the warning results in that particular line going over 80 characters.
- remove warning '/example-0/rpu@ff9a0000/r5@0:
node has a unit name, but no reg or ranges property'
by adding reg to r5 node.
v5:
- update device tree sample and yaml parsing to not raise any warnings
- description for memory-region in yaml parsing
- compatible string in yaml parsing for TCM
- parse_fw change from use of rproc_of_resm_mem_entry_init to rproc_mem_entry_init and use of alloc/release
- var's of type zynqmp_r5_pdata all have same local variable name
- use dev_dbg instead of dev_info
v6:
- adding memory carveouts is handled much more similarly.
All mem carveouts are now described in reserved memory as needed. That is, TCM nodes are not coupled to remoteproc anymore.
This is reflected in the remoteproc R5 driver and the device tree binding.
- remove mailbox from device tree binding as it is not necessary for elf loading
v7:
- remove unused headers
- zynqmp_r5_remoteproc_probe:lockstep_mode from u32* to u32
- device-tree binding "lockstep-mode" to "xlnx,cluster-mode"
- remove zynqmp_r5_mem_probe and loop to Probe R5 memory devices at probe()
- remove is_r5_mode_set from zynqmp rpu remote processor private data
- do not error out if no mailbox is provided since mailboxes are optional
- remove zynqmp_r5_remoteproc_probe call of platform_set_drvdata as pdata is handled in zynqmp_r5_remoteproc_remove
v8:
- remove old acks, reviewed-by's in commit message
v9:
- if zynqmp_r5_remoteproc.c pdata->tx_mc_skbs not initialized, then do not call skb_queue_empty
- update arguments and documentation for zynqmp_pm_set_rpu_mode
- in fn zynqmp_pm_force_powerdown, change arg 'target' to 'node'
- zynqmp_pm_request_wakeup update code style
- edit 3/5 patch commit message
- document zynqmp_pm_set_tcm_config and zynqmp_pm_get_rpu_mode documentation to include expected return val
- remove unused fn zynqmp_pm_get_node_status
- update 5/5 patch commit message to document supported configurations and how they are booted by the driver.
- remove copyrights other than SPDX from zynqmp_r5_remoteproc.c
- compilation warnings no longer raised
- remove unused includes from zynqmp_r5_remoteproc.c
- remove unused var autoboot from zynqmp_r5_remoteproc.c
- reorder zynqmp_r5_pdata fpr small mem savings due to alignment
- zynqmp_pm_set_tcm_config and zynqmp_pm_set_rpu_mode uses second arg
- zynqmp_r5_remoteproc.c use of zynqmp_pm_set_tcm_config now does not have output arg
- in tcm handling, unconditionally use &= 0x000fffff mask since all nodes in this fn are for tcm
- update comments for translating dma field in tcm handling to device address
- update calls to rproc_mem_entry_init in parse_mem_regions so that there are only 2 cases for types of carveouts instead of 3
- in parse_mem_regions, check if device tree node is null before using it
- add example device tree nodes used in parse_mem_regions and tcm parsing
- add comment for vring id node length
- add check for string length so that vring id is at least min length
- move tcm nodes from reserved mem to instead own device tree nodes and only use them if enabled in device tree
- add comment for explaining handling of rproc_elf_load_rsc_table
- remove obsolete check for "if (vqid < 0)" in zynqmp_r5_rproc_kick
- remove unused field mems in struct zynqmp_r5_pdata
- remove call to zynqmp_r5_mem_probe and the fn itself as tcm handling is done by zyqmp_r5_pm_request_tcm
- remove obsolete setting of dma_ops and parent device dma_mask
- remove obsolete use of of_dma_configure
- add comment for call to r5_set_mode fn
- make mbox usage optional and gracefully inform user via dev_dbg if not present
- change lockstep_mode from u32* to u32
- update zynqmp_pm_set_rpu_mode and zynqmp_pm_set_rpu_mode documentation and remove unused args
v10:
- add include types.h to xlnx-zynqmp.h for compilation
v11:
- update usage of zynqmp_pm_get_rpu_mode to return rpu mode in enum
- update zynqmp_pm_set_tcm_config and zynqmp_pm_set_rpu_mode arguments to remove unused args
- use enums instead of u32 where possible in zynqmp_r5_remoteproc
- zynqmp_r5_remoteproc: update prints to not use carriage return, just newline
- zynqmp_r5_remoteproc: look up tcm banks via property instead of string name
- print device tree nodes with %pOF instead of %s with node name field
- update tcm release to unmap VA
- handle r5-1 use case
- device tree binding r5 node to have link to TCMs via meta-memory-regions property
- fix device tree binding so no warnings from 'make dt_binding_check'

Ben Levinsky (5):
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU
configuration.
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add RPU configuration APIs
dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc
bindings
remoteproc: Add initial zynqmp R5 remoteproc driver

 .../xilinx,zynqmp-r5-remoteproc.yaml          | 123 +++
 drivers/firmware/xilinx/zynqmp.c              |  94 ++
 drivers/remoteproc/Kconfig                    |  10 +
 drivers/remoteproc/Makefile                   |   1 +
 drivers/remoteproc/zynqmp_r5_remoteproc.c     | 898 ++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h          |  60 ++
 6 files changed, 1186 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
 create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c

2.17.1

Add ZynqMP firmware ioctl enums for RPU configuration.

---
v3:
- add xilinx-related platform mgmt fn's instead of wrapping around function pointer in xilinx eemi ops struct
v4:
- add default values for enums

---
 include/linux/firmware/xlnx-zynqmp.h | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

index 5968df82b991..bb347dfe4ba4 100644
@@ -104,6 +104,10 @@ enum pm_ret_status {
 };
 
 enum pm_ioctl_id {
+	IOCTL_GET_RPU_OPER_MODE = 0,
+	IOCTL_SET_RPU_OPER_MODE = 1,
+	IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
+	IOCTL_TCM_COMB_CONFIG = 3,
 	IOCTL_SD_DLL_RESET = 6,
 	IOCTL_SET_SD_TAPDELAY,
 	IOCTL_SET_PLL_FRAC_MODE,

@@ -129,6 +133,21 @@ enum pm_query_id {
 	PM_QID_CLOCK_GET_MAX_DIVISOR,
 };
 
+enum rpu_oper_mode {
+	PM_RPU_MODE_LOCKSTEP = 0,
+	PM_RPU_MODE_SPLIT = 1,
+};
+
+enum rpu_boot_mem {
+	PM_RPU_BOOTMEM_LOVEC = 0,
+	PM_RPU_BOOTMEM_HIVEC = 1,
+};
+
+enum rpu_tcm_comb {
+	PM_RPU_TCM_SPLIT = 0,
+	PM_RPU_TCM_COMB = 1,
+};
+
 enum zynqmp_pm_reset_action {
 	PM_RESET_ACTION_RELEASE,
 	PM_RESET_ACTION_ASSERT,

2.17.1

Add shutdown/wakeup a resource eemi operations to shutdown or bringup a resource.

Note alignment of args matches convention of other fn's in this file. The reason being that the long fn name results in aligned args that otherwise go over 80 chars so shift right to avoid this

---
v3:
- add xilinx-related platform mgmt fn's instead of wrapping around function pointer in xilinx eemi ops struct
- fix formatting
v4:
- add default values for enumv3:
- add xilinx-related platform mgmt fn's instead of wrapping around function pointer in xilinx eemi ops struct
- fix formatting
v4:
- add default values for enum
v9:
- zynqmp_pm_force_powerdown update arg 'target' to 'node'
- zynqmp_pm_request_wakeup fix code style
v10:
- add types.h to includes for compilation

---
 drivers/firmware/xilinx/zynqmp.c     | 35 ++++++++++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h | 23 ++++++++++++++++++
 2 files changed, 58 insertions(+)

index 8d1ff2454e2e..a966ee956573 100644
@@ -846,6 +846,41 @@ int zynqmp_pm_release_node(const u32 node)
 }
 EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
 
+/**
+ * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to
+ *             be powered down forcefully
+ * @node:  Node ID of the targeted PU or subsystem
+ * @ack:   Flag to specify whether acknowledge is requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_force_pwrdwn(const u32 node,
+			   const enum zynqmp_pm_request_ack ack)
+{
+	return zynqmp_pm_invoke_fn(PM_FORCE_POWERDOWN, node, ack, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_force_pwrdwn);
+
+/**
+ * zynqmp_pm_request_wake - PM call to wake up selected master or subsystem
+ * @node:  Node ID of the master or subsystem
+ * @set_addr:  Specifies whether the address argument is relevant
+ * @address:   Address from which to resume when woken up
+ * @ack:   Flag to specify whether acknowledge requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_request_wake(const u32 node,
+			   const bool set_addr,
+			   const u64 address,
+			   const enum zynqmp_pm_request_ack ack)
+{
+	/* set_addr flag is encoded into 1st bit of address */
+	return zynqmp_pm_invoke_fn(PM_REQUEST_WAKEUP, node, address | set_addr,
+				   address >> 32, ack, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_request_wake);
+
 /**
  * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
  * @node:		Node ID of the slave

index bb347dfe4ba4..6241c5ac51b3 100644
@@ -12,6 +12,7 @@
 
 #ifndef __FIRMWARE_ZYNQMP_H__
 #define __FIRMWARE_ZYNQMP_H__
+#include <linux/types.h>
 
 #define ZYNQMP_PM_VERSION_MAJOR	1
 #define ZYNQMP_PM_VERSION_MINOR	0

@@ -64,6 +65,8 @@
 
 enum pm_api_id {
 	PM_GET_API_VERSION = 1,
+	PM_FORCE_POWERDOWN = 8,
+	PM_REQUEST_WAKEUP = 10,
 	PM_SYSTEM_SHUTDOWN = 12,
 	PM_REQUEST_NODE = 13,
 	PM_RELEASE_NODE,

@@ -376,6 +379,12 @@ int zynqmp_pm_write_pggs(u32 index, u32 value);
 int zynqmp_pm_read_pggs(u32 index, u32 *value);
 int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype);
 int zynqmp_pm_set_boot_health_status(u32 value);
+int zynqmp_pm_force_pwrdwn(const u32 target,
+			   const enum zynqmp_pm_request_ack ack);
+int zynqmp_pm_request_wake(const u32 node,
+			   const bool set_addr,
+			   const u64 address,
+			   const enum zynqmp_pm_request_ack ack);
 #else
 static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
 {

@@ -526,6 +535,20 @@ static inline int zynqmp_pm_set_boot_health_status(u32 value)
 {
 	return -ENODEV;
 }
+
+static inline int zynqmp_pm_force_pwrdwn(const u32 target,
+					 const enum zynqmp_pm_request_ack ack)
+{
+	return -ENODEV;
+}
+
+static inline int zynqmp_pm_request_wake(const u32 node,
+					 const bool set_addr,
+					 const u64 address,
+					 const enum zynqmp_pm_request_ack ack)
+{
+	return -ENODEV;
+}
 #endif
 
 #endif /* __FIRMWARE_ZYNQMP_H__ */

2.17.1

This patch adds APIs to access to configure RPU and its processor-specific memory.

That is query the run-time mode of RPU as either split or lockstep as well as API to set this mode. In addition add APIs to access configuration of the RPUs' tightly coupled memory (TCM).

---
v3:
- add xilinx-related platform mgmt fn's instead of wrapping around
function pointer in xilinx eemi ops struct
v4:
- add default values for enums
v9:
- update commit message
- for zynqmp_pm_set_tcm_config and zynqmp_pm_get_rpu_mode update docs for expected output, arguments as well removing unused args
- remove unused fn zynqmp_pm_get_node_status
v11:
- update usage of zynqmp_pm_get_rpu_mode to return rpu mode in enum
- update zynqmp_pm_set_tcm_config and zynqmp_pm_set_rpu_mode arguments to remove unused args

---
 drivers/firmware/xilinx/zynqmp.c     | 59 ++++++++++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h | 18 +++++++++
 2 files changed, 77 insertions(+)

index a966ee956573..807e404589f8 100644
@@ -846,6 +846,65 @@ int zynqmp_pm_release_node(const u32 node)
 }
 EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
 
+/**
+ * zynqmp_pm_get_rpu_mode() - Get RPU mode
+ * @node_id:	Node ID of the device
+ * @rpu_mode:	return by reference value
+ *		either split or lockstep
+ *
+ * Return:	return 0 on success or error+reason.
+ *		if success, then  rpu_mode will be set
+ *		to current rpu mode.
+ */
+int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode)
+{
+	u32 ret_payload[PAYLOAD_ARG_CNT];
+	int ret;
+
+	ret = zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
+				  IOCTL_GET_RPU_OPER_MODE, 0, 0, ret_payload);
+	if (ret < 0)
+		(void)rpu_mode;
+	else
+		*rpu_mode = ret_payload[0];
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_get_rpu_mode);
+
+/**
+ * zynqmp_pm_set_rpu_mode() - Set RPU mode
+ * @node_id:	Node ID of the device
+ * @arg1:	Argument 1 to requested IOCTL call. This is expeted to
+ *              to be value from enum rpu_oper_mode
+ *
+ * This function is used to set RPU mode to split or lockstep
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
+				   IOCTL_SET_RPU_OPER_MODE, arg1, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_rpu_mode);
+
+/**
+ * zynqmp_pm_set_tcm_config - configure TCM
+ * @arg1:	Argument 1 to requested IOCTL call
+ *              either PM_RPU_TCM_COMB or PM_RPU_TCM_SPLIT
+ *
+ * This function is used to set RPU mode to split or combined
+ *
+ * Return: status: 0 for success, else failure
+ */
+int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1)
+{
+	return zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
+				   IOCTL_TCM_COMB_CONFIG, arg1, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_set_tcm_config);
+
 /**
  * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to
  *             be powered down forcefully

index 6241c5ac51b3..79aa2fcbcd54 100644
@@ -385,6 +385,9 @@ int zynqmp_pm_request_wake(const u32 node,
 			   const bool set_addr,
 			   const u64 address,
 			   const enum zynqmp_pm_request_ack ack);
+int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode);
+int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1);
+int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1);
 #else
 static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
 {

@@ -549,6 +552,21 @@ static inline int zynqmp_pm_request_wake(const u32 node,
 {
 	return -ENODEV;
 }
+
+static inline int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode)
+{
+	return -ENODEV;
+}
+
+static inline int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1)
+{
+	return -ENODEV;
+}
+
+static inline int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1)
+{
+	return -ENODEV;
+}
 #endif
 
 #endif /* __FIRMWARE_ZYNQMP_H__ */

2.17.1

Hi Ben,

Noticed some issues while going through the code. A couple of queries below.

[...]

Add binding for ZynqMP R5 OpenAMP.

Represent the RPU domain resources in one device node. Each RPU processor is a subnode of the top RPU domain node.

---
v3:
- update zynqmp_r5 yaml parsing to not raise warnings for extra information in children of R5 node. The warning "node has a unit name, but no reg or ranges property" will still be raised though as this particular node is needed to describe the '#address-cells' and '#size-cells' information.
v4::
- remove warning '/example-0/rpu@ff9a0000/r5@0:
node has a unit name, but no reg or ranges property'
by adding reg to r5 node.
v5:
- update device tree sample and yaml parsing to not raise any warnings
- description for memory-region in yaml parsing
- compatible string in yaml parsing for TCM
v6:
- remove coupling TCM nodes with remoteproc
- remove mailbox as it is optional not needed
v7:
- change lockstep-mode to xlnx,cluster-mode
v9:
- show example IPC nodes and tcm bank nodes
v11:
- add property meta-memory-regions to illustrate link between r5 and TCM banks
- update so no warnings from 'make dt_binding_check'

---
 .../xilinx,zynqmp-r5-remoteproc.yaml          | 123 ++++++++++++++++++
 1 file changed, 123 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml

new file mode 100644
index 000000000000..148374c61908
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xilinx R5 remote processor controller bindings
+
+description:
+  This document defines the binding for the remoteproc component that loads and
+  boots firmwares on the Xilinx Zynqmp and Versal family chipset.
+
+  Note that the Linux has global addressing view of the R5-related memory (TCM)
+  so the absolute address ranges are provided in TCM reg's.
+maintainers:
+  - Ed Mooring <[email protected]>
+  - Ben Levinsky <[email protected]>
+
+properties:
+  compatible:
+    const: "xlnx,zynqmp-r5-remoteproc-1.0"
+
+  lockstep-mode:
+    description:
+      R5 core configuration (split is 0 or lock-step and 1)
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt mapping for remoteproc IPI. It is required if the
+      user uses the remoteproc driver with the RPMsg kernel driver.
+    maxItems: 6
+
+  memory-region:
+    description:
+      collection of memory carveouts used for elf-loading and inter-processor
+      communication.
+    maxItems: 4
+    minItems: 4
+  meta-memory-regions:
+    description:
+      collection of memories that are not present in the top level memory
+      nodes' mapping. For example, R5s' TCM banks. These banks are needed
+      for R5 firmware meta data such as the R5 firmware's heap and stack
+  pnode-id:
+    maxItems: 1
+  mboxes:
+    maxItems: 2
+  mbox-names:
+    maxItems: 2
+
+examples:
+  - |
+     reserved-memory {
+          #address-cells = <1>;
+          #size-cells = <1>;
+          ranges;
+          elf_load: rproc@3ed000000 {
+               no-map;
+               reg = <0x3ed00000 0x40000>;
+          };
+     };
+     rpu {
+          compatible = "xlnx,zynqmp-r5-remoteproc-1.0";
+          #address-cells = <1>;
+          #size-cells = <1>;
+          ranges;
+          lockstep-mode = <0>;
+          r5_0 {
+               ranges;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               memory-region = <&elf_load>;
+               meta-memory-regions = <0x40 0x41>;
+               pnode-id = <0x7>;
+          };
+     };
+
+     /*
+      * Below nodes are required if using TCM to load R5 firmware
+      * if not, then either do not provide nodes are label as disabled in
+      * status property
+      */
+     tcm_0a@ffe00000 {
+         reg = <0xffe00000 0x10000>;
+         pnode-id = <0xf>;
+         no-map;
+         status = "okay";
+         phandle = <0x40>;
+         compatible = "xlnx,tcm";
+     };
+     tcm_1a@ffe20000 {
+         reg = <0xffe20000 0x10000>;
+         pnode-id = <0x10>;
+         no-map;
+         status = "okay";
+         compatible = "xlnx,tcm";
+         phandle = <0x41>;
+     };
+
+     /*
+      * Below nodes are required for IPC, as Xilinx Kernel
+      * can potentially have other applications that use CMA
+      * and conflict from hardware design. With that in mind,
+      * explicitly state the address spaces for the IPC remoteproc
+      * mechanisms.
+      *
+      * If IPC not required and only elf-loading then these are not needed.
+      */
+     rpu0vdev0vring0: rpu0vdev0vring0@3ed40000 {
+         no-map;
+         reg = <0x3ed40000 0x4000>;
+     };
+     rpu0vdev0vring1: rpu0vdev0vring1@3ed44000 {
+         no-map;
+         reg = <0x3ed44000 0x4000>;
+     };
+     rpu0vdev0buffer: rpu0vdev0buffer@3ed48000 {
+         no-map;
+         reg = <0x3ed48000 0x100000>;
+     };
+
+...

2.17.1

R5 is included in Xilinx Zynq UltraScale MPSoC so by adding this remotproc driver, we can boot the R5 sub-system in different 2
configurations: split or lock-step.

The Xilinx R5 Remoteproc Driver boots the R5's via calls to the Xilinx Platform Management Unit that handles the R5 configuration, memory access and R5 lifecycle management. The interface to this manager is done in this driver via zynqmp_pm_* function calls.

---
v2:
- remove domain struct as per review from Mathieu
v3:
- add xilinx-related platform mgmt fn's instead of wrapping around function pointer in xilinx eemi ops struct
v4:
- add default values for enums
- fix formatting as per checkpatch.pl --strict. Note that 1 warning and 1 check are still raised as each is due to fixing the warning results in that
particular line going over 80 characters.
v5:
- parse_fw change from use of rproc_of_resm_mem_entry_init to rproc_mem_entry_init and use of alloc/release
- var's of type zynqmp_r5_pdata all have same local variable name
- use dev_dbg instead of dev_info
v6:
- adding memory carveouts is handled much more similarly. All mem carveouts are
now described in reserved memory as needed. That is, TCM nodes are not coupled to remoteproc anymore. This is reflected in the remoteproc R5
driver
and the device tree binding.
- remove mailbox from device tree binding as it is not necessary for elf loading
- use lockstep-mode property for configuring RPU
v7:
- remove unused headers
- change u32 *lockstep_mode -> u32 lockstep_mode;
- change device-tree binding "lockstep-mode" to xlnx,cluster-mode
- remove zynqmp_r5_mem_probe and loop to Probe R5 memory devices at remoteproc-probe time
- remove is_r5_mode_set from zynqmp rpu remote processor private data
- do not error out if no mailbox is provided
- remove zynqmp_r5_remoteproc_probe call of platform_set_drvdata as pdata is
handled in zynqmp_r5_remoteproc_remove
v8:
- remove old acks, reviewed-by's in commit message
v9:
- as mboxes are now optional, if pdata->tx_mc_skbs not initialized then do not call skb_queue_empty
- update usage for zynqmp_pm_set_rpu_mode, zynqmp_pm_set_tcm_config and zynqmp_pm_get_rpu_mode
- update 5/5 patch commit message to document supported configurations and how they are booted by the driver.
- remove copyrights other than SPDX from zynqmp_r5_remoteproc.c
- compilation warnings no longer raised
- remove unused includes from zynqmp_r5_remoteproc.c
- remove unused var autoboot from zynqmp_r5_remoteproc.c
- reorder zynqmp_r5_pdata fpr small mem savings due to alignment
- use of zynqmp_pm_set_tcm_config now does not have
output arg
- in tcm handling, unconditionally use &= 0x000fffff mask since all nodes in this fn are for tcm
- update comments for translating dma field in tcm handling to device address
- update calls to rproc_mem_entry_init in parse_mem_regions so that there are only 2 cases for types of carveouts instead of 3
- in parse_mem_regions, check if device tree node is null before using it
- add example device tree nodes used in parse_mem_regions and tcm parsing
- add comment for vring id node length
- add check for string length so that vring id is at least min length
- move tcm nodes from reserved mem to instead own device tree nodes and only use them if enabled in device tree
- add comment for explaining handling of rproc_elf_load_rsc_table
- remove obsolete check for "if (vqid < 0)" in zynqmp_r5_rproc_kick
- remove unused field mems in struct zynqmp_r5_pdata
- remove call to zynqmp_r5_mem_probe and the fn itself as tcm handling is done by zyqmp_r5_pm_request_tcm
- remove obsolete setting of dma_ops and parent device dma_mask
- remove obsolete use of of_dma_configure
- add comment for call to r5_set_mode fn
- make mbox usage optional and gracefully inform user via dev_dbg if not present
- change var lockstep_mode from u32* to u32
v11:
- use enums instead of u32 where possible in zynqmp_r5_remoteproc
- update usage of zynqmp_pm_set/get_rpu_mode and zynqmp_pm_set_tcm_config
- update prints to not use carriage return, just newline
- look up tcm banks via property in r5 node instead of string name
- print device tree nodes with %pOF instead of %s with node name field
- update tcm release to unmap VA
- handle r5-1 use case

---
 drivers/remoteproc/Kconfig                |  10 +
 drivers/remoteproc/Makefile               |   1 +
 drivers/remoteproc/zynqmp_r5_remoteproc.c | 898 ++++++++++++++++++++++
 3 files changed, 909 insertions(+)
 create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c

index c4d1731295eb..dd9ed45654e0 100644
@@ -249,6 +249,16 @@ config STM32_RPROC
 
 	  This can be either built-in or a loadable module.
 
+config ZYNQMP_R5_REMOTEPROC
+	tristate "ZynqMP_R5 remoteproc support"
+	depends on ARM64 && PM && ARCH_ZYNQMP
+	select RPMSG_VIRTIO
+	select MAILBOX
+	select ZYNQMP_IPI_MBOX
+	help
+	  Say y or m here to support ZynqMP R5 remote processors via the remote
+	  processor framework.
+
 endif # REMOTEPROC
 
 endmenu

index e8b886e511f0..04d1c95d06d7 100644
@@ -28,5 +28,6 @@ obj-$(CONFIG_QCOM_WCNSS_PIL)		+= qcom_wcnss_pil.o
 qcom_wcnss_pil-y			+= qcom_wcnss.o
 qcom_wcnss_pil-y			+= qcom_wcnss_iris.o
 obj-$(CONFIG_ST_REMOTEPROC)		+= st_remoteproc.o
+obj-$(CONFIG_ZYNQMP_R5_REMOTEPROC)	+= zynqmp_r5_remoteproc.o
 obj-$(CONFIG_ST_SLIM_REMOTEPROC)	+= st_slim_rproc.o
 obj-$(CONFIG_STM32_RPROC)		+= stm32_rproc.o

2.17.1

The Signed-off-by chain looks wrong here. As the submitter, your tag should be last in the chain.

See Documentation/process/submitting-patches.rst for more details.

Thanks,
Punit

[...]