Add support of Lontium lt8912 MIPI to HDMI bridge
Subsystems (4)
cover Add support of Lontium lt8912 MIPI to HDMI bridge
Hello,
this patch set adds the support of the Lontium lt8912 MIPI to HDMI bridge in the kernel.
It's only support the video part, not the audio part yet since I don't have the datasheet of this component. I get the current i2c configuration from Digi and Boundary drivers.
Developed using the DB_DSIHD board from BoundaryDevices.
Thanks,
Adrien Grassein
Adrien Grassein (2):
dt-bindings: display: bridge: Add documentation for LT8912 drm/bridge: Introduce LT8912 DSI to HDMI bridge
.../display/bridge/lontium,lt8912.yaml | 92 +++ MAINTAINERS | 6 + drivers/gpu/drm/bridge/Kconfig | 14 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/lontium-lt8912.c | 749 ++++++++++++++++++ 5 files changed, 862 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml create mode 100644 drivers/gpu/drm/bridge/lontium-lt8912.c
Signature · 1 line
2.25.1
PATCH 1/2 dt-bindings: display: bridge: Add documentation for LT8912
Lontium LT8912 is a DSI to HDMI bridge.
--- .../display/bridge/lontium,lt8912.yaml | 92 +++++++++++++++++++ MAINTAINERS | 5 + 2 files changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml
Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml new file +92 -0
@@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT8912 MIPI to HDMI Bridge + +maintainers: + - Adrien Grassein <[email protected]> + +description: | + The LT8912 is a bridge device which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt8912 + + reg: + maxItems: 1 + + ddc-i2c-bus: + maxItems: 1 + description: i2c bus used to read EDID of the connected display. + + dsi-lanes: + maxItems: 1 + description: dsi lanes count interconnected with lt8912. + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI port-1 for MIPI input + + required: + - port@0 + +required: + - compatible + - ddc-i2c-bus + - dsi-lanes + - reg + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912"; + reg = <0x48>; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + dsi-lanes = <4>; + ddc-i2c-bus = <&ddc_i2c_bus>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + }; + }; + + ddc_i2c_bus: i2c5 { + #address-cells = <1>; + #size-cells = <0>; + }; + +...
MAINTAINERS +5 -0
@@ -10472,6 +10472,11 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git F: drivers/hid/hid-lg-g15.c +LONTIUM LT8912 MIPI TO HDMI BRIDGE +M: Adrien Grassein <[email protected]> +S: Maintained +F: Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml + LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Sathya Prakash <[email protected]> M: Sreekanth Reddy <[email protected]>
Signature · 1 line
2.25.1
PATCH 1/2 dt-bindings: display: bridge: Add documentation for LT8912
In reply to Adrien GrasseinLontium LT8912 is a DSI to HDMI bridge.
--- .../display/bridge/lontium,lt8912.yaml | 92 +++++++++++++++++++ MAINTAINERS | 5 + 2 files changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml
Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml new file +92 -0
@@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT8912 MIPI to HDMI Bridge + +maintainers: + - Adrien Grassein <[email protected]> + +description: | + The LT8912 is a bridge device which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt8912 + + reg: + maxItems: 1 + + ddc-i2c-bus: + maxItems: 1 + description: i2c bus used to read EDID of the connected display. + + dsi-lanes: + maxItems: 1 + description: dsi lanes count interconnected with lt8912. + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI port-1 for MIPI input + + required: + - port@0 + +required: + - compatible + - ddc-i2c-bus + - dsi-lanes + - reg + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912"; + reg = <0x48>; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + dsi-lanes = <4>; + ddc-i2c-bus = <&ddc_i2c_bus>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + }; + }; + + ddc_i2c_bus: i2c5 { + #address-cells = <1>; + #size-cells = <0>; + }; + +...
MAINTAINERS +5 -0
@@ -10472,6 +10472,11 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git F: drivers/hid/hid-lg-g15.c +LONTIUM LT8912 MIPI TO HDMI BRIDGE +M: Adrien Grassein <[email protected]> +S: Maintained +F: Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml + LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Sathya Prakash <[email protected]> M: Sreekanth Reddy <[email protected]>
Signature · 1 line
2.25.1
Rob Herring
maintainerRe: [PATCH 1/2] dt-bindings: display: bridge: Add documentation for LT8912
Quoted 28 lines · Adrien Grassein
Lontium LT8912 is a DSI to HDMI bridge.
Signed-off-by Adrien Grassein <[email protected]>--- .../display/bridge/lontium,lt8912.yaml | 92 +++++++++++++++++++ MAINTAINERS | 5 + 2 files changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yamlDocumentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml new file +13
-0@@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT8912 MIPI to HDMI Bridge + +maintainers: + - Adrien Grassein <[email protected]> + +description: | + The LT8912 is a bridge device which convert DSI to HDMI
Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml line 23
Quoted 10 lines
Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml new file +10
-0+ +properties: + compatible: + enum: + - lontium,lt8912 + + reg: + maxItems: 1 + + ddc-i2c-bus:
This belongs in an hdmi-connector node.
Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml line 29
Quoted 6 lines
Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml new file +6
-0+ maxItems: 1 + description: i2c bus used to read EDID of the connected display. + + dsi-lanes: + maxItems: 1 + description: dsi lanes count interconnected with lt8912.
'data-lanes' in the graph is the standard way to do this.
You'll need video-interfaces.yaml which is pending in the media tree.
Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml line 42
Quoted 13 lines
Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml new file +13
-0+ + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI port-1 for MIPI input
You're going to need a port for the connector.
Quoted 69 lines
Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml new file +50
-0+ + required: + - port@0 + +required: + - compatible + - ddc-i2c-bus + - dsi-lanes + - reg + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912"; + reg = <0x48>; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + dsi-lanes = <4>; + ddc-i2c-bus = <&ddc_i2c_bus>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + }; + }; + }; + + ddc_i2c_bus: i2c5 { + #address-cells = <1>; + #size-cells = <0>; + }; + +...MAINTAINERS +5
-0@@ -10472,6 +10472,11 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git F: drivers/hid/hid-lg-g15.c +LONTIUM LT8912 MIPI TO HDMI BRIDGE +M: Adrien Grassein <[email protected]> +S: Maintained +F: Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml + LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Sathya Prakash <[email protected]> M: Sreekanth Reddy <[email protected]>Signature · 1 line
2.25.1
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 2/2 drm/bridge: Introduce LT8912 DSI to HDMI bridge
In reply to Adrien GrasseinLontium Lt8912 is a DSI to HDMI bridge.
--- MAINTAINERS | 1 + drivers/gpu/drm/bridge/Kconfig | 14 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/lontium-lt8912.c | 749 ++++++++++++++++++++++++ 4 files changed, 765 insertions(+) create mode 100644 drivers/gpu/drm/bridge/lontium-lt8912.c
MAINTAINERS +1 -0
@@ -10476,6 +10476,7 @@ LONTIUM LT8912 MIPI TO HDMI BRIDGE M: Adrien Grassein <[email protected]> S: Maintained F: Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml +F: drivers/gpu/drm/bridge/lontium-lt8912.c LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Sathya Prakash <[email protected]>
drivers/gpu/drm/bridge/Kconfig +14 -0
@@ -48,6 +48,20 @@ config DRM_DISPLAY_CONNECTOR on ARM-based platforms. Saying Y here when this driver is not needed will not cause any issue. +config DRM_LONTIUM_LT8912 + tristate "Lontium LT8912 DSI/HDMI bridge" + depends on OF + select DRM_PANEL_BRIDGE + select DRM_KMS_HELPER + select REGMAP_I2C + help + Driver for Lontium LT8912 DSI to HDMI bridge + chip driver. + Please say Y if you have such hardware. + + Say M here if you want to support this hardware as a module. + The module will be named "lontium-lt8912". + config DRM_LONTIUM_LT9611 tristate "Lontium LT9611 DSI/HDMI bridge" select SND_SOC_HDMI_CODEC if SND_SOC
drivers/gpu/drm/bridge/Makefile +1 -0
@@ -2,6 +2,7 @@ obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o +obj-$(CONFIG_DRM_LONTIUM_LT8912) += lontium-lt8912.o obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o obj-$(CONFIG_DRM_LONTIUM_LT9611UXC) += lontium-lt9611uxc.o obj-$(CONFIG_DRM_LVDS_CODEC) += lvds-codec.o
drivers/gpu/drm/bridge/lontium-lt8912.c new file +749 -0
749 lines not on this page · raw message
Signature · 1 line
2.25.1