Skip to contentSkip to conversation

Control-flow Enforcement: Indirect Branch Tracking

PATCH Superseded Yu-cheng Yu 5 participants 21 messages Mar 10, 2021 – Mar 12, 2021

Subsystems (7)

v22 of 30 Superseded Latest is v30 →

lore
Share & tools
lore
#0 lore raw

v22 cover Control-flow Enforcement: Indirect Branch Tracking

Control-flow Enforcement (CET) is a new Intel processor feature that blocks return/jump-oriented programming attacks. Details are in "Intel 64 and IA-32 Architectures Software Developer's Manual" [1].

This is the second part of CET and enables Indirect Branch Tracking (IBT). It is built on top of the shadow stack series.

Changes in v22:
- Add patch #8: Add endbr64 to sgx vdso entry point.
- Rebase to Linus tree v5.12-rc2.

[1] Intel 64 and IA-32 Architectures Software Developer's Manual:

    https://software.intel.com/en-us/download/intel-64-and-ia-32-
    architectures-sdm-combined-volumes-1-2a-2b-2c-2d-3a-3b-3c-3d-and-4

[2] Indirect Branch Tracking patches v21:

    https://lore.kernel.org/r/[email protected]/

H.J. Lu (3):
x86/cet/ibt: Update arch_prctl functions for Indirect Branch Tracking x86/vdso/32: Add ENDBR32 to __kernel_vsyscall entry point x86/vdso: Insert endbr32/endbr64 to vDSO

Yu-cheng Yu (5):
x86/cet/ibt: Update Kconfig for user-mode Indirect Branch Tracking x86/cet/ibt: User-mode Indirect Branch Tracking support x86/cet/ibt: Handle signals for Indirect Branch Tracking x86/cet/ibt: Update ELF header parsing for Indirect Branch Tracking x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

 arch/x86/Kconfig                         |  1 +
 arch/x86/entry/vdso/Makefile             |  4 ++
 arch/x86/entry/vdso/vdso32/system_call.S |  3 ++
 arch/x86/entry/vdso/vsgx.S               |  3 ++
 arch/x86/include/asm/cet.h               |  3 ++
 arch/x86/kernel/cet.c                    | 59 +++++++++++++++++++++++-
 arch/x86/kernel/cet_prctl.c              |  5 ++
 arch/x86/kernel/fpu/signal.c             |  8 ++--
 arch/x86/kernel/process_64.c             |  8 ++++
 9 files changed, 89 insertions(+), 5 deletions(-)
Signature · 1 line
2.21.0
#1 lore raw

PATCH v22 1/8 x86/cet/ibt: Update Kconfig for user-mode Indirect Branch Tracking

Indirect branch tracking is a hardware security feature that verifies near indirect call/jump instructions arrive at intended targets, which are labeled by the compiler with ENDBR opcodes. If such instructions reach unlabeled locations, the processor raises control-protection faults.

Check the compiler is up-to-date at config time.

---
 arch/x86/Kconfig | 1 +
 1 file changed, 1 insertion(+)
arch/x86/Kconfig +1 -0
index 2c93178262f5..96000ed48469 100644
@@ -1953,6 +1953,7 @@ config X86_CET
 	def_bool n
 	depends on AS_WRUSS
 	depends on ARCH_HAS_SHADOW_STACK
+	depends on $(cc-option,-fcf-protection)
 	select ARCH_USES_HIGH_VMA_FLAGS
 	select ARCH_MAYBE_MKWRITE
 	select ARCH_USE_GNU_PROPERTY
Signature · 1 line
2.21.0
#2 lore raw

PATCH v22 2/8 x86/cet/ibt: User-mode Indirect Branch Tracking support

In reply to Yu-cheng Yu

Introduce user-mode Indirect Branch Tracking (IBT) support. Add routines for the setup/disable of IBT.

---
 arch/x86/include/asm/cet.h |  3 +++
 arch/x86/kernel/cet.c      | 33 +++++++++++++++++++++++++++++++++
 2 files changed, 36 insertions(+)
arch/x86/include/asm/cet.h +3 -0
index c2437378f339..c20c2f671145 100644
@@ -15,6 +15,7 @@ struct cet_status {
 	unsigned long	shstk_base;
 	unsigned long	shstk_size;
 	unsigned int	locked:1;
+	unsigned int	ibt_enabled:1;
 };
 
 #ifdef CONFIG_X86_CET
@@ -27,6 +28,8 @@ void cet_free_shstk(struct task_struct *p);
 int cet_verify_rstor_token(bool ia32, unsigned long ssp, unsigned long *new_ssp);
 void cet_restore_signal(struct sc_ext *sc);
 int cet_setup_signal(bool ia32, unsigned long rstor, struct sc_ext *sc);
+int cet_setup_ibt(void);
+void cet_disable_ibt(void);
 #else
 static inline int prctl_cet(int option, u64 arg2) { return -EINVAL; }
 static inline int cet_setup_thread_shstk(struct task_struct *p,
arch/x86/kernel/cet.c +33 -0
index 12738cdfb5f2..3361706ba950 100644
@@ -13,6 +13,8 @@
 #include <linux/uaccess.h>
 #include <linux/sched/signal.h>
 #include <linux/compat.h>
+#include <linux/vmalloc.h>
+#include <linux/bitops.h>
 #include <asm/msr.h>
 #include <asm/user.h>
 #include <asm/fpu/internal.h>
@@ -346,3 +348,34 @@ int cet_setup_signal(bool ia32, unsigned long rstor_addr, struct sc_ext *sc_ext)
 
 	return 0;
 }
+
+int cet_setup_ibt(void)
+{
+	u64 msr_val;
+
+	if (!static_cpu_has(X86_FEATURE_IBT))
+		return -EOPNOTSUPP;
+
+	start_update_msrs();
+	rdmsrl(MSR_IA32_U_CET, msr_val);
+	msr_val |= (CET_ENDBR_EN | CET_NO_TRACK_EN);
+	wrmsrl(MSR_IA32_U_CET, msr_val);
+	end_update_msrs();
+	current->thread.cet.ibt_enabled = 1;
+	return 0;
+}
+
+void cet_disable_ibt(void)
+{
+	u64 msr_val;
+
+	if (!static_cpu_has(X86_FEATURE_IBT))
+		return;
+
+	start_update_msrs();
+	rdmsrl(MSR_IA32_U_CET, msr_val);
+	msr_val &= ~CET_ENDBR_EN;
+	wrmsrl(MSR_IA32_U_CET, msr_val);
+	end_update_msrs();
+	current->thread.cet.ibt_enabled = 0;
+}
Signature · 1 line
2.21.0
#3 lore raw

PATCH v22 3/8 x86/cet/ibt: Handle signals for Indirect Branch Tracking

In reply to Yu-cheng Yu

When an indirect CALL/JMP instruction is executed and before it reaches the target, it is in 'WAIT_ENDBR' status, which can be read from MSR_IA32_U_CET. The status is part of a task's status before a signal is raised and preserved in the signal frame. It is restored for sigreturn.

IBT state machine is described in Intel SDM Vol. 1, Sec. 18.3.

---
 arch/x86/kernel/cet.c        | 26 ++++++++++++++++++++++++--
 arch/x86/kernel/fpu/signal.c |  8 +++++---
 2 files changed, 29 insertions(+), 5 deletions(-)
arch/x86/kernel/cet.c +24 -2
index 3361706ba950..34a26eb7f259 100644
@@ -300,6 +300,13 @@ void cet_restore_signal(struct sc_ext *sc_ext)
 		msr_val |= CET_SHSTK_EN;
 	}
 
+	if (cet->ibt_enabled) {
+		msr_val |= (CET_ENDBR_EN | CET_NO_TRACK_EN);
+
+		if (sc_ext->wait_endbr)
+			msr_val |= CET_WAIT_ENDBR;
+	}
+
 	if (test_thread_flag(TIF_NEED_FPU_LOAD))
 		cet_user_state->user_cet = msr_val;
 	else
@@ -340,9 +347,24 @@ int cet_setup_signal(bool ia32, unsigned long rstor_addr, struct sc_ext *sc_ext)
 		sc_ext->ssp = new_ssp;
 	}
 
-	if (ssp) {
+	if (ssp || cet->ibt_enabled) {
 		start_update_msrs();
-		wrmsrl(MSR_IA32_PL3_SSP, ssp);
+
+		if (ssp)
+			wrmsrl(MSR_IA32_PL3_SSP, ssp);
+
+		if (cet->ibt_enabled) {
+			u64 r;
+
+			rdmsrl(MSR_IA32_U_CET, r);
+
+			if (r & CET_WAIT_ENDBR) {
+				sc_ext->wait_endbr = 1;
+				r &= ~CET_WAIT_ENDBR;
+				wrmsrl(MSR_IA32_U_CET, r);
+			}
+		}
+
 		end_update_msrs();
 	}
 
arch/x86/kernel/fpu/signal.c +5 -3
index 270e4649f435..b914d74c8ba6 100644
@@ -57,7 +57,8 @@ int save_cet_to_sigframe(int ia32, void __user *fp, unsigned long restorer)
 {
 	int err = 0;
 
-	if (!current->thread.cet.shstk_size)
+	if (!current->thread.cet.shstk_size &&
+	    !current->thread.cet.ibt_enabled)
 		return 0;
 
 	if (fp) {
@@ -89,7 +90,8 @@ static int get_cet_from_sigframe(int ia32, void __user *fp, struct sc_ext *ext)
 
 	memset(ext, 0, sizeof(*ext));
 
-	if (!current->thread.cet.shstk_size)
+	if (!current->thread.cet.shstk_size &&
+	    !current->thread.cet.ibt_enabled)
 		return 0;
 
 	if (fp) {
@@ -577,7 +579,7 @@ static unsigned long fpu__alloc_sigcontext_ext(unsigned long sp)
 	 * sigcontext_ext is at: fpu + fpu_user_xstate_size +
 	 * FP_XSTATE_MAGIC2_SIZE, then aligned to 8.
 	 */
-	if (cet->shstk_size)
+	if (cet->shstk_size || cet->ibt_enabled)
 		sp -= (sizeof(struct sc_ext) + 8);
 
 	return sp;
Signature · 1 line
2.21.0
#4 lore raw

PATCH v22 4/8 x86/cet/ibt: Update ELF header parsing for Indirect Branch Tracking

In reply to Yu-cheng Yu

An ELF file's .note.gnu.property indicates features the file supports. The property is parsed at loading time and passed to arch_setup_elf_ property(). Update it for Indirect Branch Tracking.

---
 arch/x86/kernel/process_64.c | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/x86/kernel/process_64.c +8 -0
index cda830b0f7ee..11497689a841 100644
@@ -864,6 +864,14 @@ int arch_setup_elf_property(struct arch_elf_state *state)
 			r = cet_setup_shstk();
 	}
 
+	if (r < 0)
+		return r;
+
+	if (static_cpu_has(X86_FEATURE_IBT)) {
+		if (state->gnu_property & GNU_PROPERTY_X86_FEATURE_1_IBT)
+			r = cet_setup_ibt();
+	}
+
 	return r;
 }
 #endif
Signature · 1 line
2.21.0
#5 lore raw

PATCH v22 5/8 x86/cet/ibt: Update arch_prctl functions for Indirect Branch Tracking

In reply to Yu-cheng Yu

From: "H.J. Lu" <[email protected]>

Update ARCH_X86_CET_STATUS and ARCH_X86_CET_DISABLE for Indirect Branch Tracking.

---
 arch/x86/kernel/cet_prctl.c | 5 +++++
 1 file changed, 5 insertions(+)
arch/x86/kernel/cet_prctl.c +5 -0
index 0030c63a08c0..4df1eac41965 100644
@@ -22,6 +22,9 @@ static int cet_copy_status_to_user(struct cet_status *cet, u64 __user *ubuf)
 		buf[2] = cet->shstk_size;
 	}
 
+	if (cet->ibt_enabled)
+		buf[0] |= GNU_PROPERTY_X86_FEATURE_1_IBT;
+
 	return copy_to_user(ubuf, buf, sizeof(buf));
 }
 
@@ -46,6 +49,8 @@ int prctl_cet(int option, u64 arg2)
 			return -EINVAL;
 		if (arg2 & GNU_PROPERTY_X86_FEATURE_1_SHSTK)
 			cet_disable_shstk();
+		if (arg2 & GNU_PROPERTY_X86_FEATURE_1_IBT)
+			cet_disable_ibt();
 		return 0;
 
 	case ARCH_X86_CET_LOCK:
Signature · 1 line
2.21.0
#6 lore raw

PATCH v22 6/8 x86/vdso/32: Add ENDBR32 to __kernel_vsyscall entry point

In reply to Yu-cheng Yu

From: "H.J. Lu" <[email protected]>

Add ENDBR32 to __kernel_vsyscall entry point.

---
 arch/x86/entry/vdso/vdso32/system_call.S | 3 +++
 1 file changed, 3 insertions(+)
arch/x86/entry/vdso/vdso32/system_call.S +3 -0
index de1fff7188aa..f19eaec3de3b 100644
@@ -14,6 +14,9 @@
 	ALIGN
 __kernel_vsyscall:
 	CFI_STARTPROC
+#ifdef CONFIG_X86_CET
+	endbr32
+#endif
 	/*
 	 * Reshuffle regs so that all of any of the entry instructions
 	 * will preserve enough state.
Signature · 1 line
2.21.0
#7 lore raw

PATCH v22 7/8 x86/vdso: Insert endbr32/endbr64 to vDSO

In reply to Yu-cheng Yu

From: "H.J. Lu" <[email protected]>

When Indirect Branch Tracking (IBT) is enabled, vDSO functions may be called indirectly, and must have ENDBR32 or ENDBR64 as the first instruction. The compiler must support -fcf-protection=branch so that it can be used to compile vDSO.

---
 arch/x86/entry/vdso/Makefile | 4 ++++
 1 file changed, 4 insertions(+)
arch/x86/entry/vdso/Makefile +4 -0
index 05c4abc2fdfd..c9eccbc06e8c 100644
@@ -93,6 +93,10 @@ endif
 
 $(vobjs): KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_LTO) $(GCC_PLUGINS_CFLAGS) $(RETPOLINE_CFLAGS),$(KBUILD_CFLAGS)) $(CFL)
 
+ifdef CONFIG_X86_CET
+$(vobjs) $(vobjs32): KBUILD_CFLAGS += -fcf-protection=branch
+endif
+
 #
 # vDSO code runs in userspace and -pg doesn't help with profiling anyway.
 #
Signature · 1 line
2.21.0
#8 lore raw

PATCH v22 8/8 x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

In reply to Yu-cheng Yu

When CET is enabled, __vdso_sgx_enter_enclave() needs an endbr64 in the beginning of the function.

Cc Andy Lutomirski <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Jarkko Sakkinen <[email protected]>
---
 arch/x86/entry/vdso/vsgx.S | 3 +++
 1 file changed, 3 insertions(+)
arch/x86/entry/vdso/vsgx.S +3 -0
index 86a0e94f68df..a70d4d09f713 100644
@@ -27,6 +27,9 @@
 SYM_FUNC_START(__vdso_sgx_enter_enclave)
 	/* Prolog */
 	.cfi_startproc
+#ifdef CONFIG_X86_CET
+	endbr64
+#endif
 	push	%rbp
 	.cfi_adjust_cfa_offset	8
 	.cfi_rel_offset		%rbp, 0
Signature · 1 line
2.21.0
#9 lore raw

Re: [PATCH v22 8/8] x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

Quoted 2 lines · Yu-cheng Yu

When CET is enabled, __vdso_sgx_enter_enclave() needs an endbr64 in the beginning of the function.

OK.

What you should do is to explain what it does and why it's needed.

Quoted 27 lines
Cc Andy Lutomirski <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Jarkko Sakkinen <[email protected]>
---
 arch/x86/entry/vdso/vsgx.S | 3 +++
 1 file changed, 3 insertions(+)
arch/x86/entry/vdso/vsgx.S +3 -0
index 86a0e94f68df..a70d4d09f713 100644
@@ -27,6 +27,9 @@
 SYM_FUNC_START(__vdso_sgx_enter_enclave)
 	/* Prolog */
 	.cfi_startproc
+#ifdef CONFIG_X86_CET
+	endbr64
+#endif
 	push	%rbp
 	.cfi_adjust_cfa_offset	8
 	.cfi_rel_offset		%rbp, 0
Signature · 1 line
2.21.0

/Jarkko

#10 lore raw

Re: [PATCH v22 8/8] x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

Quoted 8 lines · Jarkko Sakkinen
Quoted 2 lines · Yu-cheng Yu

When CET is enabled, __vdso_sgx_enter_enclave() needs an endbr64 in the beginning of the function.

OK.

What you should do is to explain what it does and why it's needed.

The endbr marks a branch target. Without the "no-track" prefix, if an indirect call/jmp reaches a non-endbr opcode, a control-protection fault is raised. Usually endbr's are inserted by the compiler. For assembly, these have to be put in manually. I will add this in the commit log if there is another revision. Thanks!

--
Yu-cheng

Quoted 30 lines
Quoted 27 lines
Cc Andy Lutomirski <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Jarkko Sakkinen <[email protected]>
---
  arch/x86/entry/vdso/vsgx.S | 3 +++
  1 file changed, 3 insertions(+)
arch/x86/entry/vdso/vsgx.S +3 -0
index 86a0e94f68df..a70d4d09f713 100644
@@ -27,6 +27,9 @@
  SYM_FUNC_START(__vdso_sgx_enter_enclave)
  	/* Prolog */
  	.cfi_startproc
+#ifdef CONFIG_X86_CET
+	endbr64
+#endif
  	push	%rbp
  	.cfi_adjust_cfa_offset	8
  	.cfi_rel_offset		%rbp, 0
Signature · 1 line
2.21.0

/Jarkko

maintainer
#11 lore raw

Re: [PATCH v22 8/8] x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

Quoted 7 lines · Yu-cheng
Quoted 7 lines

arch/x86/entry/vdso/vsgx.S line 32

Quoted 7 lines
arch/x86/entry/vdso/vsgx.S +3 -0
@@ -27,6 +27,9 @@
  SYM_FUNC_START(__vdso_sgx_enter_enclave)
  	/* Prolog */
  	.cfi_startproc
+#ifdef CONFIG_X86_CET
+	endbr64
+#endif

You can hide this ifdeffery in a macro and have

	ENDBR64

at the callsite and define

.macro ENDBR64

#ifdef CONFIG_X86_CET
	endbr64

#endif
.endm

or so, perhaps. Ditto for endbr32.

Thx.

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
#12 lore raw

Re: [PATCH v22 8/8] x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

In reply to Yu, Yu-cheng
Quoted 7 lines · Yu-cheng
Quoted 6 lines · Jarkko Sakkinen
Quoted 2 lines · Yu-cheng Yu

When CET is enabled, __vdso_sgx_enter_enclave() needs an endbr64 in the beginning of the function.

OK.

Quoted 8 lines
Quoted 2 lines

What you should do is to explain what it does and why it's needed.

The endbr marks a branch target.  Without the "no-track" prefix, if an indirect call/jmp reaches a non-endbr opcode, a control-protection fault is raised.  Usually endbr's are inserted by the compiler.  For assembly, these have to be put in manually.  I will add this in the commit log if there is another revision.  Thanks!

This is close, but it's missing a detail or two that I think is important for someone like Jarkko trying to figure out what it means for his subsystem or driver.

I'd probably say:

ENDBR is a special new instruction for the Indirect Branch Tracking (IBR) component of CET. IBT prevents attacks by ensuring that (most) indirect branches and function calls may only land at ENDBR instructions. Branches that don't follow the rules will result in control flow (#CF) exceptions.

ENDBR is a noop when IBT is unsupported or disabled. Most ENDBR instructions are inserted automatically by the compiler, but branch targets written in assembly must have ENDBR added manually, like this one.

#13 lore raw

Re: [PATCH v22 8/8] x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

Quoted 29 lines · Dave Hansen
Quoted 7 lines · Yu-cheng
Quoted 6 lines · Jarkko Sakkinen
Quoted 2 lines · Yu-cheng Yu

When CET is enabled, __vdso_sgx_enter_enclave() needs an endbr64 in the beginning of the function.

OK.

Quoted 8 lines
Quoted 2 lines

What you should do is to explain what it does and why it's needed.

The endbr marks a branch target.  Without the "no-track" prefix, if an indirect call/jmp reaches a non-endbr opcode, a control-protection fault is raised.  Usually endbr's are inserted by the compiler.  For assembly, these have to be put in manually.  I will add this in the commit log if there is another revision.  Thanks!

This is close, but it's missing a detail or two that I think is important for someone like Jarkko trying to figure out what it means for his subsystem or driver.

I'd probably say:

ENDBR is a special new instruction for the Indirect Branch Tracking (IBR) component of CET. IBT prevents attacks by ensuring that (most) indirect branches and function calls may only land at ENDBR instructions. Branches that don't follow the rules will result in control flow (#CF) exceptions.

Quoted 4 lines

ENDBR is a noop when IBT is unsupported or disabled. Most ENDBR instructions are inserted automatically by the compiler, but branch targets written in assembly must have ENDBR added manually, like this one.

Ok, I will update. Thanks!

--
Yu-cheng

#14 lore raw

Re: [PATCH v22 8/8] x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

In reply to Dave Hansen
Quoted 29 lines · Dave Hansen
Quoted 7 lines · Yu-cheng
Quoted 6 lines · Jarkko Sakkinen
Quoted 2 lines · Yu-cheng Yu

When CET is enabled, __vdso_sgx_enter_enclave() needs an endbr64 in the beginning of the function.

OK.

Quoted 8 lines
Quoted 2 lines

What you should do is to explain what it does and why it's needed.

The endbr marks a branch target.  Without the "no-track" prefix, if an indirect call/jmp reaches a non-endbr opcode, a control-protection fault is raised.  Usually endbr's are inserted by the compiler.  For assembly, these have to be put in manually.  I will add this in the commit log if there is another revision.  Thanks!

This is close, but it's missing a detail or two that I think is important for someone like Jarkko trying to figure out what it means for his subsystem or driver.

I'd probably say:

ENDBR is a special new instruction for the Indirect Branch Tracking (IBR) component of CET. IBT prevents attacks by ensuring that (most) indirect branches and function calls may only land at ENDBR instructions. Branches that don't follow the rules will result in control flow (#CF) exceptions.

Quoted 3 lines

ENDBR is a noop when IBT is unsupported or disabled. Most ENDBR instructions are inserted automatically by the compiler, but branch targets written in assembly must have ENDBR added manually, like this one.

Thank you, this clears the whole thing a lot.

Doesn't this mean that it could be there just as well unconditionally?

/Jarkko

#15 lore raw

Re: [PATCH v22 8/8] x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

Quoted 30 lines · Jarkko Sakkinen
Quoted 29 lines · Dave Hansen
Quoted 7 lines · Yu-cheng
Quoted 6 lines · Jarkko Sakkinen
Quoted 2 lines · Yu-cheng Yu

When CET is enabled, __vdso_sgx_enter_enclave() needs an endbr64 in the beginning of the function.

OK.

Quoted 8 lines
Quoted 2 lines

What you should do is to explain what it does and why it's needed.

The endbr marks a branch target.  Without the "no-track" prefix, if an indirect call/jmp reaches a non-endbr opcode, a control-protection fault is raised.  Usually endbr's are inserted by the compiler.  For assembly, these have to be put in manually.  I will add this in the commit log if there is another revision.  Thanks!

This is close, but it's missing a detail or two that I think is important for someone like Jarkko trying to figure out what it means for his subsystem or driver.

I'd probably say:

ENDBR is a special new instruction for the Indirect Branch Tracking (IBR) component of CET. IBT prevents attacks by ensuring that (most) indirect branches and function calls may only land at ENDBR instructions. Branches that don't follow the rules will result in control flow (#CF) exceptions.

Quoted 7 lines
Quoted 3 lines

ENDBR is a noop when IBT is unsupported or disabled. Most ENDBR instructions are inserted automatically by the compiler, but branch targets written in assembly must have ENDBR added manually, like this one.

Thank you, this clears the whole thing a lot.

Doesn't this mean that it could be there just as well unconditionally?

Please, ignore the question (got the answer).

/Jarkko

#16 lore raw

Re: [PATCH v22 8/8] x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

In reply to Jarkko Sakkinen
Quoted 6 lines · Jarkko Sakkinen
Quoted 6 lines

ENDBR is a special new instruction for the Indirect Branch Tracking (IBT) component of CET. IBT prevents attacks by ensuring that (most) indirect branches and function calls may only land at ENDBR instructions. Branches that don't follow the rules will result in control flow (#CF) exceptions.

Quoted 6 lines
Quoted 3 lines

ENDBR is a noop when IBT is unsupported or disabled. Most ENDBR instructions are inserted automatically by the compiler, but branch targets written in assembly must have ENDBR added manually, like this one.

Thank you, this clears the whole thing a lot.

Doesn't this mean that it could be there just as well unconditionally?

It could be there unconditionally. But, I think it's still worth the #ifdef just out of the principle of being as tidy as possible. The #ifdef is basically as low cost and low complexity as you get. It is also somewhat self-documenting: "This instruction is only necessary when your CPU supports IBT".

#17 lore raw

Re: [PATCH v22 8/8] x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

In reply to Yu, Yu-cheng
Quoted 7 lines · Yu-cheng
Quoted 6 lines · Jarkko Sakkinen
Quoted 2 lines · Yu-cheng Yu

When CET is enabled, __vdso_sgx_enter_enclave() needs an endbr64 in the beginning of the function.

OK.

Quoted 8 lines
Quoted 2 lines

What you should do is to explain what it does and why it's needed.

The endbr marks a branch target. Without the "no-track" prefix, if an indirect call/jmp reaches a non-endbr opcode, a control-protection fault is raised. Usually endbr's are inserted by the compiler. For assembly, these have to be put in manually. I will add this in the commit log if there is another revision. Thanks!

Thanks for the explanation. There is another revision, because this is lacking from the commit message.

Does it do any harm to put it there unconditionally?

Quoted 36 lines

--
Yu-cheng

Quoted 30 lines
Quoted 27 lines
Cc Andy Lutomirski <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Jarkko Sakkinen <[email protected]>
---
  arch/x86/entry/vdso/vsgx.S | 3 +++
  1 file changed, 3 insertions(+)
arch/x86/entry/vdso/vsgx.S +3 -0
index 86a0e94f68df..a70d4d09f713 100644
@@ -27,6 +27,9 @@
  SYM_FUNC_START(__vdso_sgx_enter_enclave)
  	/* Prolog */
  	.cfi_startproc
+#ifdef CONFIG_X86_CET
+	endbr64
+#endif
  	push	%rbp
  	.cfi_adjust_cfa_offset	8
  	.cfi_rel_offset		%rbp, 0
Signature · 1 line
2.21.0

/Jarkko

/Jarkko

#18 lore raw

Re: [PATCH v22 8/8] x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

Quoted 1 line · Jarkko Sakkinen

Does it do any harm to put it there unconditionally?

Blows up your text footprint and I$ pressure. These instructions are 4 bytes each.

Aside from that, they're a NOP, so only consume front-end resources (hopefully) on older CPUs and when IBT is disabled.

#19 lore raw

Re: [PATCH v22 8/8] x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

Quoted 9 lines · Peter Zijlstra
Quoted 1 line · Jarkko Sakkinen

Does it do any harm to put it there unconditionally?

Blows up your text footprint and I$ pressure. These instructions are 4 bytes each.

Aside from that, they're a NOP, so only consume front-end resources (hopefully) on older CPUs and when IBT is disabled.

Thanks Peter. I think probably we'll do the macro Boris suggested. That takes care of the visual clutter, and eliminates the need of using .byte when the assembler is outdated.

--
Yu-cheng

#20 lore raw

Re: [PATCH v22 8/8] x86/vdso: Add ENDBR64 to __vdso_sgx_enter_enclave

In reply to Peter Zijlstra
Quoted 8 lines · Peter Zijlstra
Quoted 1 line · Jarkko Sakkinen

Does it do any harm to put it there unconditionally?

Blows up your text footprint and I$ pressure. These instructions are 4 bytes each.

Aside from that, they're a NOP, so only consume front-end resources (hopefully) on older CPUs and when IBT is disabled.

OK, understood, thanks for the explanation.

/Jarkko