dt-bindings: display: bridge: Add Chipone ICN6211 bindings
Subsystems (5)
Jagan Teki
maintainerPATCH v5 1/2 dt-bindings: display: bridge: Add Chipone ICN6211 bindings
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and produces RGB565, RGB666, RGB888 output format.
Add dt-bingings for it.
---
Changes for v5:
- rebase drm-misc-next
- collect Rob, Robert review tags
Changes for v4:
- fixed Laurent comments
- added regulators
- replace reset with EN
- fixed warnings pointed by Robert
Changes for v3:
- updated to new dt-bindings style
.../display/bridge/chipone,icn6211.yaml | 99 +++++++++++++++++++ MAINTAINERS | 5 + 2 files changed, 104 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml new file +99 -0
@@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge + +maintainers: + - Jagan Teki <[email protected]> + +description: | + ICN6211 is MIPI-DSI to RGB Converter bridge from chipone. + + It has a flexible configuration of MIPI DSI signal input and + produce RGB565, RGB666, RGB888 output format. + +properties: + compatible: + enum: + - chipone,icn6211 + + reg: + maxItems: 1 + description: virtual channel number of a DSI peripheral + + enable-gpios: + description: Bridge EN pin, chip is reset when EN is low. + + vdd1-supply: + description: A 1.8V/2.5V/3.3V supply that power the MIPI RX. + + vdd2-supply: + description: A 1.8V/2.5V/3.3V supply that power the PLL. + + vdd3-supply: + description: A 1.8V/2.5V/3.3V supply that power the RGB output. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DSI input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DPI output (panel or connector). + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - enable-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + bridge@0 { + compatible = "chipone,icn6211"; + reg = <0>; + enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_in_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + }; + }; + + port@1 { + reg = <1>; + + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; + };
MAINTAINERS +5 -0
@@ -5568,6 +5568,11 @@ S: Maintained F: Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml F: drivers/gpu/drm/panel/panel-boe-himax8279d.c +DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTER BRIDGE +M: Jagan Teki <[email protected]> +S: Maintained +F: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml + DRM DRIVER FOR FARADAY TVE200 TV ENCODER M: Linus Walleij <[email protected]> S: Maintained
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Jagan Teki
maintainerPATCH v5 2/2 drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and produce RGB565, RGB666, RGB888 output format.
Add bridge driver for it.
---
Changes for v5:
- rebase drm-misc-next
- collect Robert review tags
Changes for v4:
- added regulators
- replace reset with EN
- fixed warnings pointed by Robert
Changes for v3:
- updated the driver to inline with new drm bridge style
MAINTAINERS | 1 + drivers/gpu/drm/bridge/Kconfig | 13 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/chipone-icn6211.c | 293 +++++++++++++++++++++++ 4 files changed, 308 insertions(+) create mode 100644 drivers/gpu/drm/bridge/chipone-icn6211.c
MAINTAINERS +1 -0
@@ -5572,6 +5572,7 @@ DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTER BRIDGE M: Jagan Teki <[email protected]> S: Maintained F: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml +F: drivers/gpu/drm/bridge/chipone-icn6211.c DRM DRIVER FOR FARADAY TVE200 TV ENCODER M: Linus Walleij <[email protected]>
drivers/gpu/drm/bridge/Kconfig +13 -0
@@ -27,6 +27,19 @@ config DRM_CDNS_DSI Support Cadence DPI to DSI bridge. This is an internal bridge and is meant to be directly embedded in a SoC. +config DRM_CHIPONE_ICN6211 + tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge" + depends on OF + select DRM_MIPI_DSI + select DRM_PANEL_BRIDGE + help + ICN6211 is MIPI-DSI/RGB Converter bridge from chipone. + + It has a flexible configuration of MIPI DSI signal input + and produce RGB565, RGB666, RGB888 output format. + + If in doubt, say "N". + config DRM_CHRONTEL_CH7033 tristate "Chrontel CH7033 Video Encoder" depends on OF
drivers/gpu/drm/bridge/Makefile +1 -0
@@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o +obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o
drivers/gpu/drm/bridge/chipone-icn6211.c new file +293 -0
293 lines not on this page · raw message
Signature · 6 lines
2.25.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Robert Foss
AppliedPushed to drm-misc-next
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=a42e37db23b88120aea9fa31f9c0952accb39296
Quoted 150 lines · Jagan Teki
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and produces RGB565, RGB666, RGB888 output format.
Add dt-bingings for it.
Signed-off-by Jagan Teki <[email protected]>Reviewed-by Robert Foss <[email protected]>Reviewed-by Rob Herring <[email protected]>---
Changes for v5:
- rebase drm-misc-next
- collect Rob, Robert review tags
Changes for v4:
- fixed Laurent comments
- added regulators
- replace reset with EN
- fixed warnings pointed by Robert
Changes for v3:
- updated to new dt-bindings style.../display/bridge/chipone,icn6211.yaml | 99 +++++++++++++++++++ MAINTAINERS | 5 + 2 files changed, 104 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yamlDocumentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml new file +99
-0@@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge + +maintainers: + - Jagan Teki <[email protected]> + +description: | + ICN6211 is MIPI-DSI to RGB Converter bridge from chipone. + + It has a flexible configuration of MIPI DSI signal input and + produce RGB565, RGB666, RGB888 output format. + +properties: + compatible: + enum: + - chipone,icn6211 + + reg: + maxItems: 1 + description: virtual channel number of a DSI peripheral + + enable-gpios: + description: Bridge EN pin, chip is reset when EN is low. + + vdd1-supply: + description: A 1.8V/2.5V/3.3V supply that power the MIPI RX. + + vdd2-supply: + description: A 1.8V/2.5V/3.3V supply that power the PLL. + + vdd3-supply: + description: A 1.8V/2.5V/3.3V supply that power the RGB output. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DSI input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for MIPI DPI output (panel or connector). + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - enable-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + bridge@0 { + compatible = "chipone,icn6211"; + reg = <0>; + enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + bridge_in_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + }; + }; + + port@1 { + reg = <1>; + + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; + };MAINTAINERS +5
-1@@ -5568,6 +5568,11 @@ S: Maintained F: Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml F: drivers/gpu/drm/panel/panel-boe-himax8279d.c +DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTER BRIDGE +M: Jagan Teki <[email protected]> +S: Maintained +F: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml + DRM DRIVER FOR FARADAY TVE200 TV ENCODER M: Linus Walleij <[email protected]> S: Maintained --
Quoted 2 lines
2.25.1
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel