Skip to contentSkip to conversation

Fix mode selection for 2x tests

PATCH Superseded Bhanuprakash Modem 3 participants 20 messages Apr 26, 2021 – May 3, 2021 Library code

v3 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v3 cover Fix mode selection for 2x tests

When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.

This series will find a combination of modes that fit into the BW.

IGT core helper would override the mode on all connectors that will be modeset by the next igt_display_commit() call in the test. These are all the connectors in igt_display_t that have a pending_pipe set by the test up to the point of calling this helper.

For 1x tests, cleanup the state before exiting the test.

Follow-up:
As modeset will happen one by one, we can't apply this approach on tests/kms_flip.c & tests/kms_setmode.c

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>

Bhanuprakash Modem (14):
lib/igt_kms: helper to override the mode on all connectors tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests tests/kms_cursor_legacy: Fix mode selection for 2x tests tests/debugfs_test: Fix mode selection for MST tests/kms_content_protection: Fix mode selection for 2x tests tests/kms_plane_scaling: Fix mode selection for 2x tests tests/kms_atomic_transition: Fix mode selection for 2x tests tests/kms_plane: Reset the state before exiting the test tests/kms_plane_alpha_blend: Reset the state before exiting the test tests/kms_cursor_edge_walk: Reset the state before exiting the test tests/kms_plane_lowres: Reset the state before exiting the test tests/kms_plane_cursor: Reset the state before exiting the test tests/kms_flip_scaled_crc: Reset the state before exiting the test tests/kms_vblank: Reset the state before exiting the test

 lib/igt_kms.c                    | 55 ++++++++++++++++++++++++++++++++
 lib/igt_kms.h                    |  1 +
 tests/debugfs_test.c             | 10 ++++++
 tests/kms_atomic_transition.c    | 10 ++++++
 tests/kms_content_protection.c   | 41 ++++++++++--------------
 tests/kms_cursor_edge_walk.c     |  3 ++
 tests/kms_cursor_legacy.c        | 47 +++++++++++++++++++++++++--
 tests/kms_flip_scaled_crc.c      |  5 +++
 tests/kms_frontbuffer_tracking.c | 33 +++++++++++++++++++
 tests/kms_plane.c                | 19 +++++++----
 tests/kms_plane_alpha_blend.c    |  5 +--
 tests/kms_plane_cursor.c         |  4 +++
 tests/kms_plane_lowres.c         |  9 ++----
 tests/kms_plane_scaling.c        | 15 +++++++--
 tests/kms_vblank.c               |  2 ++
 15 files changed, 214 insertions(+), 45 deletions(-)

--
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#1 lore raw

PATCH v3 1/14 lib/igt_kms: helper to override the mode on all connectors

This helper will iterate through all connectors those have a pending_pipe != PIPE_NONE set by the test upto the point of calling this helper. And find the combination by using ATOMIC_TEST_ONLY then return to the test.

This helper would override the mode on all connectors that will be modeset by the next igt_display_commit() call in the test.

V2:
* Remove MST specific logic (Daniel)
V3:
* Sort connector modes in descending order

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Petri Latvala <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 lib/igt_kms.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++
 lib/igt_kms.h |  1 +
 2 files changed, 56 insertions(+)
lib/igt_kms.c +55 -0
index 08d429a81..7aea8098c 100644
@@ -3841,6 +3841,61 @@ void igt_output_set_pipe(igt_output_t *output, enum pipe pipe)
 	}
 }
 
+#define for_each_connector_mode(output)		\
+	for (int i__ = 0;  i__ < output->config.connector->count_modes; i__++)
+
+static int sort_drm_modes(const void *a, const void *b)
+{
+	const drmModeModeInfo *mode1 = a, *mode2 = b;
+
+	return (mode1->clock < mode2->clock) - (mode2->clock < mode1->clock);
+}
+
+static
+bool __override_all_active_output_modes_to_fit_link_bw(igt_display_t *display, int base)
+{
+	for ( ; base < display->n_outputs; base++) {
+		igt_output_t *output = &display->outputs[base];
+
+		if (output->pending_pipe == PIPE_NONE)
+			continue;
+
+		/* Sort the modes in descending order by clock freq. */
+		qsort(output->config.connector->modes,
+		      output->config.connector->count_modes,
+		      sizeof(drmModeModeInfo),
+		      sort_drm_modes);
+
+		for_each_connector_mode(output) {
+			igt_output_override_mode(output, &output->config.connector->modes[i__]);
+
+			if (__override_all_active_output_modes_to_fit_link_bw(display, base + 1))
+				return true;
+
+			if (igt_display_try_commit_atomic(display,
+					DRM_MODE_ATOMIC_TEST_ONLY |
+					DRM_MODE_ATOMIC_ALLOW_MODESET,
+					NULL) == 0)
+				return true;
+		}
+	}
+
+	return false;
+}
+
+/**
+ * override_all_active_output_modes_to_fit_link_bw:
+ * @display: a pointer to an #igt_display_t structure
+ *
+ * Override the mode on all connectors those are sharing the link bw
+ *
+ * Returns: true if a valid connector mode combo found, else false
+ */
+bool override_all_active_output_modes_to_fit_link_bw(igt_display_t *display)
+{
+	return __override_all_active_output_modes_to_fit_link_bw(display, 0);
+}
+
 /*
  * igt_pipe_refresh:
  * @display: a pointer to an #igt_display_t structure
lib/igt_kms.h +1 -0
index 09b10b3e0..518dfffba 100644
@@ -892,5 +892,6 @@ void igt_require_pipe(igt_display_t *display,
 
 void igt_dump_connectors_fd(int drmfd);
 void igt_dump_crtcs_fd(int drmfd);
+bool override_all_active_output_modes_to_fit_link_bw(igt_display_t *display);
 
 #endif /* __IGT_KMS_H__ */
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#2 lore raw

Re: [igt-dev] [v3 i-g-t 01/14] lib/igt_kms: helper to override the mode on all connectors

Hi Bhanu,

I agree with overall approach. I have few comments given inline:

Quoted 34 lines · Bhanuprakash Modem

This helper will iterate through all connectors those have a pending_pipe != PIPE_NONE set by the test upto the point of calling this helper. And find the combination by using ATOMIC_TEST_ONLY then return to the test.

This helper would override the mode on all connectors that will be modeset by the next igt_display_commit() call in the test.

V2:
* Remove MST specific logic (Daniel)
V3:
* Sort connector modes in descending order

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Petri Latvala <[email protected]>
Cc Daniel Vetter <[email protected]>
---
  lib/igt_kms.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++
  lib/igt_kms.h |  1 +
  2 files changed, 56 insertions(+)
lib/igt_kms.c +3 -0
index 08d429a81..7aea8098c 100644
@@ -3841,6 +3841,61 @@ void igt_output_set_pipe(igt_output_t *output, enum pipe pipe)
  	}
  }
 
+#define for_each_connector_mode(output)		\
+	for (int i__ = 0;  i__ < output->config.connector->count_modes; i__++)
+

lib/igt_kms.c void igt_output_set_pipe(igt_output_t *output, enum pipe pipe) · line 3856

Quoted 10 lines
lib/igt_kms.c +10 -0
+static int sort_drm_modes(const void *a, const void *b)
+{
+	const drmModeModeInfo *mode1 = a, *mode2 = b;
+
+	return (mode1->clock < mode2->clock) - (mode2->clock < mode1->clock);
+}
+
+static
+bool __override_all_active_output_modes_to_fit_link_bw(igt_display_t *display, int base)
+{

Just a suggestion:

This can be made efficient, if before calling this function we make an array of outputs with pipe set and then we can iterate over only required outputs.

Otherwise we would have lot of unnecessary comparisons.

If we have a scenario : say two outputs output[0] and output[1] are required out of say 6 outputs, with their mode[0] and say mode[3] respectively that would actually work.

After failure of the combo output[0]>mode[0] and output[1]>mode[0] we would again check for output[2] to output[5].

This will again be the case with other combos, till we reach output[0]>mode[0] and output[1]>mode[3].

The problem will be compounded if we try to use this for 3x or 4x.

Quoted 21 lines
lib/igt_kms.c +21 -0
+	for ( ; base < display->n_outputs; base++) {
+		igt_output_t *output = &display->outputs[base];
+
+		if (output->pending_pipe == PIPE_NONE)
+			continue;
+
+		/* Sort the modes in descending order by clock freq. */
+		qsort(output->config.connector->modes,
+		      output->config.connector->count_modes,
+		      sizeof(drmModeModeInfo),
+		      sort_drm_modes);
+
+		for_each_connector_mode(output) {
+			igt_output_override_mode(output, &output->config.connector->modes[i__]);
+
+			if (__override_all_active_output_modes_to_fit_link_bw(display, base + 1))
+				return true;
+
+			if (igt_display_try_commit_atomic(display,
+					DRM_MODE_ATOMIC_TEST_ONLY |
+					DRM_MODE_ATOMIC_ALLOW_MODESET,

lib/igt_kms.c void igt_output_set_pipe(igt_output_t *output, enum pipe pipe) · line 3887

Quoted 10 lines
lib/igt_kms.c +10 -0
+					NULL) == 0)
+				return true;
+		}
+	}
+
+	return false;
+}
+
+/**
+ * override_all_active_output_modes_to_fit_link_bw:

Add prefix igt_ as per convention for all igt helper functions.

lib/igt_kms.c void igt_output_set_pipe(igt_output_t *output, enum pipe pipe) · line 3890

Quoted 3 lines
lib/igt_kms.c +3 -0
+ * @display: a pointer to an #igt_display_t structure
+ *
+ * Override the mode on all connectors those are sharing the link bw

This needs update as this is not only for connectors that share link b/w.

Also it would be good to mention that all active outputs means outputs whose pipe is set (i.e. 'pending_pipe' is not PIPE_NONE')

Regards,

Ankit

Quoted 16 lines
lib/igt_kms.c +8 -0
+ *
+ * Returns: true if a valid connector mode combo found, else false
+ */
+bool override_all_active_output_modes_to_fit_link_bw(igt_display_t *display)
+{
+	return __override_all_active_output_modes_to_fit_link_bw(display, 0);
+}
+
  /*
   * igt_pipe_refresh:
   * @display: a pointer to an #igt_display_t structure
lib/igt_kms.h +0 -0
index 09b10b3e0..518dfffba 100644

lib/igt_kms.h void igt_require_pipe(igt_display_t *display, · line 897

Quoted 6 lines
lib/igt_kms.h +1 -0
@@ -892,5 +892,6 @@ void igt_require_pipe(igt_display_t *display,
 
  void igt_dump_connectors_fd(int drmfd);
  void igt_dump_crtcs_fd(int drmfd);
+bool override_all_active_output_modes_to_fit_link_bw(igt_display_t *display);
 
  #endif /* __IGT_KMS_H__ */

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#3 lore raw

PATCH v3 2/14 tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests

In reply to Bhanuprakash Modem

When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.

This patch will find a combination of modes that fit into the BW.

V2:
* Remove MST specific logic (Daniel)

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/kms_frontbuffer_tracking.c | 33 ++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)
tests/kms_frontbuffer_tracking.c +33 -0
index 2e74bec6f..84392360b 100644
@@ -1683,6 +1683,33 @@ static void enable_prim_screen_and_wait(const struct test_mode *t)
 	do_assertions(ASSERT_NO_ACTION_CHANGE);
 }
 
+static void update_modeset_cached_params(void)
+{
+	bool found = false;
+
+	igt_output_set_pipe(prim_mode_params.output, prim_mode_params.pipe);
+	igt_output_set_pipe(scnd_mode_params.output, scnd_mode_params.pipe);
+
+	found = override_all_active_output_modes_to_fit_link_bw(&drm.display);
+	igt_require_f(found, "No valid mode combo found.\n");
+
+	prim_mode_params.mode_copy = *igt_output_get_mode(prim_mode_params.output);
+	prim_mode_params.mode = &prim_mode_params.mode_copy;
+	prim_mode_params.primary.w = prim_mode_params.mode->hdisplay;
+	prim_mode_params.primary.h = prim_mode_params.mode->vdisplay;
+
+	scnd_mode_params.mode_copy = *igt_output_get_mode(scnd_mode_params.output);
+	scnd_mode_params.mode = &scnd_mode_params.mode_copy;
+	scnd_mode_params.primary.w = scnd_mode_params.mode->hdisplay;
+	scnd_mode_params.primary.h = scnd_mode_params.mode->vdisplay;
+
+	fill_fb_region(&prim_mode_params.primary, COLOR_PRIM_BG);
+	fill_fb_region(&scnd_mode_params.primary, COLOR_SCND_BG);
+
+	__set_mode_for_params(&prim_mode_params);
+	__set_mode_for_params(&scnd_mode_params);
+}
+
 static void enable_both_screens_and_wait(const struct test_mode *t)
 {
 	fill_fb_region(&prim_mode_params.primary, COLOR_PRIM_BG);
@@ -1691,6 +1718,12 @@ static void enable_both_screens_and_wait(const struct test_mode *t)
 	__set_mode_for_params(&prim_mode_params);
 	__set_mode_for_params(&scnd_mode_params);
 
+	if (igt_display_try_commit_atomic(&drm.display,
+					  DRM_MODE_ATOMIC_TEST_ONLY |
+					  DRM_MODE_ATOMIC_ALLOW_MODESET,
+					  NULL) != 0)
+		update_modeset_cached_params();
+
 	igt_display_commit2(&drm.display, drm.display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
 
 	wanted_crc = &blue_crcs[t->format].crc;
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#4 lore raw

PATCH v3 3/14 tests/kms_cursor_legacy: Fix mode selection for 2x tests

In reply to Bhanuprakash Modem

When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.

This patch will find a combination of modes that fit into the BW.

V2:
* Remove MST specific logic (Daniel)

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/kms_cursor_legacy.c | 47 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 44 insertions(+), 3 deletions(-)
tests/kms_cursor_legacy.c +44 -3
index 4723e1ff9..afa67e2c0 100644
@@ -50,6 +50,15 @@ IGT_TEST_DESCRIPTION("Stress legacy cursor ioctl");
 
 igt_pipe_crc_t *pipe_crc;
 
+static void override_output_modes(igt_display_t *display, igt_output_t *output, igt_output_t *output2)
+{
+	bool found = override_all_active_output_modes_to_fit_link_bw(display);
+	igt_require_f(found, "No valid mode combo found.\n");
+
+	igt_output_set_pipe(output, PIPE_NONE);
+	igt_output_set_pipe(output2, PIPE_NONE);
+}
+
 static void stress(igt_display_t *display,
 		   enum pipe pipe, int num_children, unsigned mode,
 		   int timeout)
@@ -393,6 +402,7 @@ static void flip(igt_display_t *display,
 	struct drm_mode_cursor arg[2];
 	uint64_t *results;
 	struct igt_fb fb_info, fb_info2, argb_fb, cursor_fb, cursor_fb2;
+	igt_output_t *output, *output2;
 
 	results = mmap(NULL, PAGE_SIZE, PROT_WRITE, MAP_SHARED | MAP_ANON, -1, 0);
 	igt_assert(results != MAP_FAILED);
@@ -406,9 +416,20 @@ static void flip(igt_display_t *display,
 	if (mode >= flip_test_atomic)
 		igt_require(display->is_atomic);
 
-	igt_require(set_fb_on_crtc(display, flip_pipe, &fb_info));
-	if (flip_pipe != cursor_pipe)
-		igt_require(set_fb_on_crtc(display, cursor_pipe, &fb_info2));
+	igt_require((output = set_fb_on_crtc(display, flip_pipe, &fb_info)));
+	if (flip_pipe != cursor_pipe) {
+		igt_require((output2 = set_fb_on_crtc(display, cursor_pipe, &fb_info2)));
+
+		if (igt_display_try_commit_atomic(display,
+					  DRM_MODE_ATOMIC_TEST_ONLY |
+					  DRM_MODE_ATOMIC_ALLOW_MODESET,
+					  NULL) != 0) {
+			override_output_modes(display, output, output2);
+
+			igt_require((output = set_fb_on_crtc(display, flip_pipe, &fb_info)));
+			igt_require((output2 = set_fb_on_crtc(display, cursor_pipe, &fb_info2)));
+		}
+	}
 
 	igt_create_color_fb(display->drm_fd, fb_info.width, fb_info.height, DRM_FORMAT_ARGB8888, 0, .5, .5, .5, &cursor_fb);
 
@@ -879,6 +900,16 @@ static void two_screens_flip_vs_cursor(igt_display_t *display, int nloops, bool
 	igt_require((output = set_fb_on_crtc(display, pipe, &fb_info)));
 	igt_require((output2 = set_fb_on_crtc(display, pipe2, &fb2_info)));
 
+	if (igt_display_try_commit_atomic(display,
+					  DRM_MODE_ATOMIC_TEST_ONLY |
+					  DRM_MODE_ATOMIC_ALLOW_MODESET,
+					  NULL) != 0) {
+		override_output_modes(display, output, output2);
+
+		igt_require((output = set_fb_on_crtc(display, pipe, &fb_info)));
+		igt_require((output2 = set_fb_on_crtc(display, pipe2, &fb2_info)));
+	}
+
 	igt_create_color_fb(display->drm_fd, 64, 64, DRM_FORMAT_ARGB8888, 0, 1., 1., 1., &cursor_fb);
 	set_cursor_on_pipe(display, pipe, &cursor_fb);
 	populate_cursor_args(display, pipe, arg1, &cursor_fb);
@@ -1129,6 +1160,16 @@ static void two_screens_cursor_vs_flip(igt_display_t *display, int nloops, bool
 	igt_require((outputs[0] = set_fb_on_crtc(display, pipe[0], &fb_info[0])));
 	igt_require((outputs[1] = set_fb_on_crtc(display, pipe[1], &fb_info[1])));
 
+	if (igt_display_try_commit_atomic(display,
+					  DRM_MODE_ATOMIC_TEST_ONLY |
+					  DRM_MODE_ATOMIC_ALLOW_MODESET,
+					  NULL) != 0) {
+		override_output_modes(display, outputs[0], outputs[1]);
+
+		igt_require((outputs[0] = set_fb_on_crtc(display, pipe[0], &fb_info[0])));
+		igt_require((outputs[1] = set_fb_on_crtc(display, pipe[1], &fb_info[1])));
+	}
+
 	igt_create_color_fb(display->drm_fd, 64, 64, DRM_FORMAT_ARGB8888, 0, 1., 1., 1., &cursor_fb);
 
 	set_cursor_on_pipe(display, pipe[0], &cursor_fb);
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#5 lore raw

PATCH v3 4/14 tests/debugfs_test: Fix mode selection for MST

In reply to Bhanuprakash Modem

When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.

This patch will find a combination of modes that fit into the BW.

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/debugfs_test.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
tests/debugfs_test.c +10 -0
index 46ba0a8be..e66a59231 100644
@@ -104,6 +104,7 @@ static void kms_tests(int fd, int debugfs)
 
 	igt_subtest("read_all_entries_display_on") {
 		/* try to light all pipes */
+retry:
 		for_each_pipe(&display, pipe) {
 			igt_output_t *output;
 
@@ -128,6 +129,15 @@ static void kms_tests(int fd, int debugfs)
 			}
 		}
 
+		if (igt_display_try_commit_atomic(&display,
+					DRM_MODE_ATOMIC_TEST_ONLY |
+					DRM_MODE_ATOMIC_ALLOW_MODESET,
+					NULL) != 0) {
+			bool found = override_all_active_output_modes_to_fit_link_bw(&display);
+			igt_require_f(found, "No valid mode combo found.\n");
+			goto retry;
+		}
+
 		igt_display_commit2(&display, display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
 
 		read_and_discard_sysfs_entries(debugfs, 0);
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#6 lore raw

PATCH v3 5/14 tests/kms_content_protection: Fix mode selection for 2x tests

In reply to Bhanuprakash Modem

When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.

This patch will find a combination of modes that fit into the BW.

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/kms_content_protection.c | 41 +++++++++++++---------------------
 1 file changed, 16 insertions(+), 25 deletions(-)
tests/kms_content_protection.c +16 -25
index 5a75b871c..90047029d 100644
@@ -452,39 +452,18 @@ static bool sink_hdcp2_capable(igt_output_t *output)
 	return strstr(buf, "HDCP2.2");
 }
 
-static void prepare_modeset_on_mst_output(igt_output_t *output, enum pipe pipe)
+static void prepare_modeset_on_mst_output(igt_output_t *output)
 {
-	drmModeConnectorPtr c = output->config.connector;
 	drmModeModeInfo *mode;
 	igt_plane_t *primary;
-	int i, width, height;
+	int width, height;
+	enum pipe pipe = output->pending_pipe;
 
 	mode = igt_output_get_mode(output);
 
-	/*
-	 * TODO: Add logic to use the highest possible modes on each output.
-	 * Currently using 2k modes by default on all the outputs.
-	 */
-	igt_debug("Before mode override: Output %s Mode hdisplay %d Mode vdisplay %d\n",
-		   output->name, mode->hdisplay, mode->vdisplay);
-
-	if (mode->hdisplay > 1920 && mode->vdisplay > 1080) {
-		for (i = 0; i < c->count_modes; i++) {
-			if (c->modes[i].hdisplay <= 1920 && c->modes[i].vdisplay <= 1080) {
-				mode = &c->modes[i];
-				igt_output_override_mode(output, mode);
-				break;
-			}
-		}
-	}
-
-	igt_debug("After mode overide: Output %s Mode hdisplay %d Mode vdisplay %d\n",
-		   output->name, mode->hdisplay, mode->vdisplay);
-
 	width = mode->hdisplay;
 	height = mode->vdisplay;
 
-	igt_output_set_pipe(output, pipe);
 	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
 	igt_plane_set_fb(primary, NULL);
 	igt_plane_set_fb(primary, pipe % 2 ? &data.red : &data.green);
@@ -624,7 +603,8 @@ test_content_protection_mst(int content_type)
 
 		igt_assert_f(igt_pipe_connector_valid(pipe, output), "Output-pipe combination invalid\n");
 
-		prepare_modeset_on_mst_output(output, pipe);
+		igt_output_set_pipe(output, pipe);
+		prepare_modeset_on_mst_output(output);
 		mst_output[dp_mst_outputs++] = output;
 
 		pipe++;
@@ -635,6 +615,17 @@ test_content_protection_mst(int content_type)
 
 	igt_require_f(dp_mst_outputs > 1, "No DP MST set up with >= 2 outputs found in a single topology\n");
 
+	if (igt_display_try_commit_atomic(display,
+				DRM_MODE_ATOMIC_TEST_ONLY |
+				DRM_MODE_ATOMIC_ALLOW_MODESET,
+				NULL) != 0) {
+		bool found = override_all_active_output_modes_to_fit_link_bw(display);
+		igt_require_f(found, "No valid mode combo found for MST modeset\n");
+
+		for (count = 0; count < dp_mst_outputs; count++)
+			prepare_modeset_on_mst_output(mst_output[count]);
+	}
+
 	ret = igt_display_try_commit2(display, COMMIT_ATOMIC);
 	igt_require_f(ret == 0, "Commit failure during MST modeset\n");
 
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#7 lore raw

PATCH v3 6/14 tests/kms_plane_scaling: Fix mode selection for 2x tests

In reply to Bhanuprakash Modem

When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.

This patch will find a combination of modes that fit into the BW.

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/kms_plane_scaling.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)
tests/kms_plane_scaling.c +12 -3
index 34efc588e..d314d1d0e 100644
@@ -630,9 +630,6 @@ static void test_scaler_with_multi_pipe_plane(data_t *d)
 	d->plane3 = igt_output_get_plane(output2, 0);
 	d->plane4 = get_num_scalers(d, pipe2) >= 2 ? igt_output_get_plane(output2, 1) : NULL;
 
-	mode1 = igt_output_get_mode(output1);
-	mode2 = igt_output_get_mode(output2);
-
 	igt_skip_on(!igt_display_has_format_mod(display, DRM_FORMAT_XRGB8888,
 						tiling));
 
@@ -658,8 +655,20 @@ static void test_scaler_with_multi_pipe_plane(data_t *d)
 	igt_plane_set_fb(d->plane3, &d->fb[2]);
 	if (d->plane4)
 		igt_plane_set_fb(d->plane4, &d->fb[3]);
+
+	if (igt_display_try_commit_atomic(display,
+				DRM_MODE_ATOMIC_TEST_ONLY |
+				DRM_MODE_ATOMIC_ALLOW_MODESET,
+				NULL) != 0) {
+		bool found = override_all_active_output_modes_to_fit_link_bw(display);
+		igt_require_f(found, "No valid mode combo found.\n");
+	}
+
 	igt_display_commit2(display, COMMIT_ATOMIC);
 
+	mode1 = igt_output_get_mode(output1);
+	mode2 = igt_output_get_mode(output2);
+
 	/* Upscaling Primary */
 	igt_plane_set_size(d->plane1, mode1->hdisplay, mode1->vdisplay);
 	igt_plane_set_size(d->plane3, mode2->hdisplay, mode2->vdisplay);
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#8 lore raw

PATCH v3 7/14 tests/kms_atomic_transition: Fix mode selection for 2x tests

In reply to Bhanuprakash Modem

When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.

This patch will find a combination of modes that fit into the BW.

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/kms_atomic_transition.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
tests/kms_atomic_transition.c +10 -0
index be60940d7..dd3c26307 100644
@@ -100,6 +100,7 @@ run_primary_test(data_t *data, enum pipe pipe, igt_output_t *output)
 	igt_plane_set_fb(primary, NULL);
 	igt_output_set_pipe(output, PIPE_NONE);
 	igt_remove_fb(data->drm_fd, &fb);
+	igt_display_commit2(&data->display, COMMIT_ATOMIC);
 }
 
 static void *fence_inc_thread(void *arg)
@@ -793,6 +794,7 @@ static void run_modeset_tests(data_t *data, int howmany, bool nonblocking, bool
 	for (i = 0; i < data->display.n_outputs; i++)
 		igt_output_set_pipe(&data->display.outputs[i], PIPE_NONE);
 
+retry:
 	for_each_connected_output(&data->display, output) {
 		drmModeModeInfo *mode = igt_output_get_mode(output);
 
@@ -839,6 +841,14 @@ static void run_modeset_tests(data_t *data, int howmany, bool nonblocking, bool
 
 	iter_max = 1 << j;
 
+	if (igt_display_try_commit_atomic(&data->display,
+				DRM_MODE_ATOMIC_TEST_ONLY |
+				DRM_MODE_ATOMIC_ALLOW_MODESET,
+				NULL) != 0) {
+		bool found = override_all_active_output_modes_to_fit_link_bw(&data->display);
+		igt_require_f(found, "No valid mode combo found.\n");
+		goto retry;
+	}
 	igt_display_commit2(&data->display, COMMIT_ATOMIC);
 
 	for (i = 0; i < iter_max; i++) {
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#9 lore raw

PATCH v3 8/14 tests/kms_plane: Reset the state before exiting the test

In reply to Bhanuprakash Modem

Before starting the next subtest, clean up the states to default values, those are assumed by other tests. This patch will also fix few typos & depricated macros.

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/kms_plane.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)
tests/kms_plane.c +13 -6
index 9fe253a8c..bea3cef00 100644
@@ -132,7 +132,7 @@ test_grab_crc(data_t *data, igt_output_t *output, enum pipe pipe,
 
 	igt_output_set_pipe(output, pipe);
 
-	primary = igt_output_get_plane(output, 0);
+	primary = igt_output_get_plane(output, DRM_PLANE_TYPE_PRIMARY);
 
 	mode = igt_output_get_mode(output);
 	if (flags & TEST_POSITION_PARTIALLY_COVERED) {
@@ -251,7 +251,11 @@ test_plane_position_with_output(data_t *data,
 	igt_plane_set_fb(sprite, NULL);
 
 	/* reset the constraint on the pipe */
-	igt_output_set_pipe(output, PIPE_ANY);
+	igt_output_set_pipe(output, PIPE_NONE);
+	igt_display_commit2(&data->display, data->display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
+
+	igt_remove_fb(data->drm_fd, &primary_fb);
+	igt_remove_fb(data->drm_fd, &sprite_fb);
 }
 
 static void
@@ -288,7 +292,7 @@ test_plane_position(data_t *data, enum pipe pipe, unsigned int flags)
  *     (vdisplay, hdisplay) we do get the same CRC than the full blue fb.
  */
 static void
-create_fb_for_mode__panning(data_t *data, drmModeModeInfo *mode,
+create_fb_for_mode_panning(data_t *data, drmModeModeInfo *mode,
 			    struct igt_fb *fb /* out */)
 {
 	unsigned int fb_id;
@@ -332,9 +336,9 @@ test_plane_panning_with_output(data_t *data,
 	igt_output_set_pipe(output, pipe);
 
 	mode = igt_output_get_mode(output);
-	primary = igt_output_get_plane(output, 0);
+	primary = igt_output_get_plane(output, DRM_PLANE_TYPE_PRIMARY);
 
-	create_fb_for_mode__panning(data, mode, &primary_fb);
+	create_fb_for_mode_panning(data, mode, &primary_fb);
 	igt_plane_set_fb(primary, &primary_fb);
 
 	if (flags & TEST_PANNING_TOP_LEFT)
@@ -355,8 +359,11 @@ test_plane_panning_with_output(data_t *data,
 	igt_plane_set_fb(primary, NULL);
 
 	/* reset states to neutral values, assumed by other tests */
-	igt_output_set_pipe(output, PIPE_ANY);
+	igt_output_set_pipe(output, PIPE_NONE);
 	igt_fb_set_position(&primary_fb, primary, 0, 0);
+	igt_display_commit2(&data->display, data->display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
+
+	igt_remove_fb(data->drm_fd, &primary_fb);
 }
 
 static void
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#10 lore raw

PATCH v3 9/14 tests/kms_plane_alpha_blend: Reset the state before exiting the test

In reply to Bhanuprakash Modem

Before starting the next subtest, clean up the states to default values, those are assumed by other tests. This patch will also fix few redundant checks.

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/kms_plane_alpha_blend.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
tests/kms_plane_alpha_blend.c +3 -2
index 5e80ae36e..a37cb27c7 100644
@@ -237,8 +237,6 @@ static void prepare_crtc(data_t *data, igt_output_t *output, enum pipe pipe)
 	}
 
 	igt_plane_set_fb(primary, &data->black_fb);
-	/* reset alpha property to default */
-	reset_alpha(display, pipe);
 }
 
 static void basic_alpha(data_t *data, enum pipe pipe, igt_plane_t *plane)
@@ -507,6 +505,9 @@ static void run_test_on_pipe_planes(data_t *data, enum pipe pipe, bool blend,
 		igt_plane_set_fb(plane, NULL);
 	}
 
+	igt_output_set_pipe(output, PIPE_NONE);
+	igt_display_commit2(display, COMMIT_ATOMIC);
+
 	igt_require_f(found, "No planes with %s property found\n",
 		      blend ? "pixel blending mode" : "alpha");
 	igt_require_f(multiply, "Multiplied (plane x pixel) alpha not available\n");
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#11 lore raw

PATCH v3 10/14 tests/kms_cursor_edge_walk: Reset the state before exiting the test

In reply to Bhanuprakash Modem

Before starting the next subtest, clean up the states to default values, those are assumed by other tests.

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/kms_cursor_edge_walk.c | 3 +++
 1 file changed, 3 insertions(+)
tests/kms_cursor_edge_walk.c +3 -0
index 69662afec..d1d8a9143 100644
@@ -225,6 +225,7 @@ static void cleanup_crtc(data_t *data)
 
 	igt_remove_fb(data->drm_fd, &data->primary_fb);
 	igt_remove_fb(data->drm_fd, &data->fb);
+	igt_display_commit2(display, display->is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
 }
 
 static void prepare_crtc(data_t *data)
@@ -268,6 +269,8 @@ static void test_crtc(data_t *data, unsigned int edges)
 	create_cursor_fb(data, data->curw, data->curh);
 
 	test_edges(data, edges);
+
+	cleanup_crtc(data);
 }
 
 static int opt_handler(int opt, int opt_index, void *_data)
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#12 lore raw

PATCH v3 11/14 tests/kms_plane_lowres: Reset the state before exiting the test

In reply to Bhanuprakash Modem

Before starting the next subtest, clean up the states to default values, those are assumed by other tests. This patch will also fix few redundant checks.

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/kms_plane_lowres.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)
tests/kms_plane_lowres.c +3 -6
index 5cfe53c8b..95346e289 100644
@@ -270,16 +270,13 @@ test_planes_on_pipe(data_t *data, uint64_t modifier)
 	igt_info("Testing connector %s using pipe %s\n",
 		 igt_output_name(data->output), kmstest_pipe_name(data->pipe));
 
-	for_each_plane_on_pipe(&data->display, data->pipe, plane) {
-		data->output = igt_get_single_output_for_pipe(&data->display, data->pipe);
-		igt_require(data->output);
-
+	for_each_plane_on_pipe(&data->display, data->pipe, plane)
 		tested += test_planes_on_pipe_with_output(data, plane, modifier);
-	}
 
-	igt_assert(tested > 0);
 	igt_output_set_pipe(data->output, PIPE_NONE);
 	igt_display_commit2(&data->display, COMMIT_ATOMIC);
+
+	igt_assert(tested > 0);
 }
 
 igt_main
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#13 lore raw

PATCH v3 12/14 tests/kms_plane_cursor: Reset the state before exiting the test

In reply to Bhanuprakash Modem

Before starting the next subtest, clean up the states to default values, those are assumed by other tests.

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/kms_plane_cursor.c | 4 ++++
 1 file changed, 4 insertions(+)
tests/kms_plane_cursor.c +4 -0
index bc9d42940..9bda47466 100644
@@ -93,6 +93,10 @@ static void test_fini(data_t *data)
 {
 	igt_pipe_crc_free(data->pipe_crc);
 	igt_display_reset(&data->display);
+	igt_plane_set_fb(data->primary, NULL);
+	igt_plane_set_fb(data->overlay, NULL);
+	igt_plane_set_fb(data->cursor, NULL);
+	igt_display_commit2(&data->display, COMMIT_ATOMIC);
 }
 
 /* Fills a FB with the solid color given. */
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#14 lore raw

PATCH v3 13/14 tests/kms_flip_scaled_crc: Reset the state before exiting the test

In reply to Bhanuprakash Modem

Before starting the next subtest, clean up the states to default values, those are assumed by other tests.

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/kms_flip_scaled_crc.c | 5 +++++
 1 file changed, 5 insertions(+)
tests/kms_flip_scaled_crc.c +5 -0
index 4923f1235..671ba7367 100644
@@ -156,6 +156,7 @@ static void test_flip_to_scaled(data_t *data, uint32_t index, enum pipe pipe,
 	int ret;
 
 	igt_display_reset(&data->display);
+	igt_display_commit2(&data->display, COMMIT_ATOMIC);
 
 	igt_debug("running on output %s pipe %s\n", output->name,
 		  kmstest_pipe_name(pipe));
@@ -246,6 +247,10 @@ static void test_flip_to_scaled(data_t *data, uint32_t index, enum pipe pipe,
 	data->pipe_crc = NULL;
 
 	clear_lut(data, pipe);
+
+	igt_output_set_pipe(output, pipe);
+	igt_plane_set_fb(primary, NULL);
+	igt_display_commit2(&data->display, COMMIT_ATOMIC);
 }
 
 igt_main
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#15 lore raw

PATCH v3 14/14 tests/kms_vblank: Reset the state before exiting the test

In reply to Bhanuprakash Modem

Before starting the next subtest, clean up the states to default values, those are assumed by other tests.

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/kms_vblank.c | 2 ++
 1 file changed, 2 insertions(+)
tests/kms_vblank.c +2 -0
index e561e41d7..9a9ce48ea 100644
@@ -96,6 +96,8 @@ static void prepare_crtc(data_t *data, int fd, igt_output_t *output)
 
 static void cleanup_crtc(data_t *data, int fd, igt_output_t *output)
 {
+	igt_output_set_pipe(output, data->pipe);
+	igt_display_commit(&data->display);
 	igt_remove_fb(fd, &data->primary_fb);
 }
 
Signature · 6 lines
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#16 lore raw

Re: [igt-dev] [v3 i-g-t 14/14] tests/kms_vblank: Reset the state before exiting the test

Quoted 25 lines

From: Modem, Bhanuprakash <[email protected]>
Sent: Monday, April 26, 2021 11:52 PM
To: [email protected]
Cc: Modem, Bhanuprakash <[email protected]>; Deak, Imre <[email protected]>; Nautiyal, Ankit K <[email protected]>; Daniel Vetter <[email protected]>
Subject: [v3 i-g-t 14/14] tests/kms_vblank: Reset the state before exiting the test

Before starting the next subtest, clean up the states to default values, those are assumed by other tests.

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>
---
 tests/kms_vblank.c | 2 ++
 1 file changed, 2 insertions(+)
tests/kms_vblank.c +0 -0
index e561e41d7..9a9ce48ea 100644

tests/kms_vblank.c static void prepare_crtc(data_t *data, int fd, igt_output_t · line 100

Quoted 5 lines
tests/kms_vblank.c +1 -0
@@ -96,6 +96,8 @@ static void prepare_crtc(data_t *data, int fd, igt_output_t
 *output)
 
 static void cleanup_crtc(data_t *data, int fd, igt_output_t *output)
 {
+	igt_output_set_pipe(output, data->pipe);

This should be PIPE_NONE. s/data->pipe/PIPE_NONE

Quoted 6 lines
tests/kms_vblank.c +1 -1
+	igt_display_commit(&data->display);
 	igt_remove_fb(fd, &data->primary_fb);
 }
 
--

2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#17 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for Fix mode selection for 2x tests (rev3)

In reply to Bhanuprakash Modem
== Series Details ==

== Series Details ==

Series: Fix mode selection for 2x tests (rev3)
URL : https://patchwork.freedesktop.org/series/88902/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_10007 -> IGTPW_5764
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/index.html

Known issues
------------

Here are the changes found in IGTPW_5764 that come from known issues:

### IGT changes ###

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[i915#1849]: https://gitlab.freedesktop.org/drm/intel/issues/1849
[i915#3180]: https://gitlab.freedesktop.org/drm/intel/issues/3180
[i915#3303]: https://gitlab.freedesktop.org/drm/intel/issues/3303

Participating hosts (40 -> 37)
------------------------------

Missing (3): fi-dg1-1 fi-bsw-cyan fi-bdw-samus

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_6074 -> IGTPW_5764

CI-20190529: 20190529
CI_DRM_10007: 29ee2107fd883991f4ba1d3965c0bc3e2c5acca2 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5764: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/index.html
IGT_6074: 3f43ae9fd22dc5a517786b984dc3aa717997664f @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#18 lore raw

[igt-dev] ✗ Fi.CI.IGT: failure for Fix mode selection for 2x tests (rev3)

In reply to Bhanuprakash Modem
== Series Details ==

== Series Details ==

Series: Fix mode selection for 2x tests (rev3)
URL : https://patchwork.freedesktop.org/series/88902/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_10007_full -> IGTPW_5764_full
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_5764_full absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_5764_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/index.html

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_5764_full:

### IGT changes ###

#### Possible regressions ####

* igt@kms_plane@plane-panning-bottom-right-pipe-a-planes:
- shard-snb: NOTRUN -> [FAIL][1] +1 similar issue
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-snb7/igt@[email protected]

* igt@kms_plane@plane-panning-bottom-right-pipe-b-planes:
- shard-tglb: [PASS][2] -> [FAIL][3] +22 similar issues
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-tglb5/igt@[email protected]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb2/igt@[email protected]

* igt@kms_plane@plane-panning-top-left-pipe-a-planes:
- shard-apl: NOTRUN -> [FAIL][4] +5 similar issues
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl8/igt@[email protected]

* igt@kms_plane@plane-panning-top-left-pipe-b-planes:
- shard-snb: [PASS][5] -> [FAIL][6] +5 similar issues
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-snb7/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-snb7/igt@[email protected]

* igt@kms_plane@plane-panning-top-left-pipe-c-planes:
- shard-kbl: [PASS][7] -> [FAIL][8] +13 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-kbl2/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl1/igt@[email protected]

* igt@kms_plane@plane-position-covered-pipe-b-planes:
- shard-glk: [PASS][9] -> [FAIL][10] +16 similar issues
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-glk9/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-glk2/igt@[email protected]

* igt@kms_plane@plane-position-covered-pipe-c-planes:
- shard-apl: [PASS][11] -> [FAIL][12] +6 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-apl7/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl2/igt@[email protected]

* igt@kms_plane@plane-position-hole-dpms-pipe-a-planes:
- shard-iclb: [PASS][13] -> [FAIL][14] +17 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-iclb7/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb2/igt@[email protected]

Known issues
------------

Here are the changes found in IGTPW_5764_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_create@create-massive:
- shard-iclb: NOTRUN -> [DMESG-WARN][15] ([i915#3002])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb3/igt@[email protected]
- shard-snb: NOTRUN -> [DMESG-WARN][16] ([i915#3002])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-snb2/igt@[email protected]
- shard-kbl: NOTRUN -> [DMESG-WARN][17] ([i915#3002])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl7/igt@[email protected]
- shard-tglb: NOTRUN -> [DMESG-WARN][18] ([i915#3002])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb7/igt@[email protected]
- shard-glk: NOTRUN -> [DMESG-WARN][19] ([i915#3002])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-glk9/igt@[email protected]

* igt@gem_ctx_persistence@clone:
- shard-snb: NOTRUN -> [SKIP][20] ([fdo#109271] / [i915#1099]) +7 similar issues
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-snb7/igt@[email protected]

* igt@gem_exec_fair@basic-deadline:
- shard-kbl: [PASS][21] -> [FAIL][22] ([i915#2846])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-kbl1/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl3/igt@[email protected]
- shard-apl: NOTRUN -> [FAIL][23] ([i915#2846])
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl6/igt@[email protected]

* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-tglb: [PASS][24] -> [FAIL][25] ([i915#2842])
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-tglb5/igt@gem_exec_fair@[email protected]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb7/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace-share@rcs0:
- shard-glk: [PASS][26] -> [FAIL][27] ([i915#2842])
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-glk3/igt@gem_exec_fair@[email protected]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-glk9/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@rcs0:
- shard-kbl: [PASS][28] -> [FAIL][29] ([i915#2851])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-kbl2/igt@gem_exec_fair@[email protected]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl3/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-pace@vecs0:
- shard-iclb: [PASS][30] -> [FAIL][31] ([i915#2842])
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-iclb4/igt@gem_exec_fair@[email protected]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb5/igt@gem_exec_fair@[email protected]

* igt@gem_exec_flush@basic-batch-kernel-default-cmd:
- shard-snb: NOTRUN -> [SKIP][32] ([fdo#109271]) +333 similar issues
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-snb5/igt@[email protected]

* igt@gem_exec_reloc@basic-wide-active@rcs0:
- shard-snb: NOTRUN -> [FAIL][33] ([i915#2389]) +2 similar issues
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-snb5/igt@gem_exec_reloc@[email protected]

* igt@gem_huc_copy@huc-copy:
- shard-kbl: NOTRUN -> [SKIP][34] ([fdo#109271] / [i915#2190])
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl6/igt@[email protected]

* igt@gem_mmap_gtt@cpuset-basic-small-copy-xy:
- shard-iclb: [PASS][35] -> [FAIL][36] ([i915#2428])
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-iclb1/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb2/igt@[email protected]

* igt@gem_mmap_gtt@cpuset-big-copy:
- shard-iclb: [PASS][37] -> [FAIL][38] ([i915#307])
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-iclb1/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb6/igt@[email protected]

* igt@gem_pread@exhaustion:
- shard-apl: NOTRUN -> [WARN][39] ([i915#2658]) +1 similar issue
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl7/igt@[email protected]

* igt@gem_pwrite@basic-exhaustion:
- shard-kbl: NOTRUN -> [WARN][40] ([i915#2658])
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl1/igt@[email protected]

* igt@gem_render_copy@y-tiled-mc-ccs-to-y-tiled-ccs:
- shard-iclb: NOTRUN -> [SKIP][41] ([i915#768]) +1 similar issue
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb7/igt@[email protected]

* igt@gem_userptr_blits@unsync-overlap:
- shard-tglb: NOTRUN -> [SKIP][42] ([i915#3297])
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb8/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][43] ([i915#3297])
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb6/igt@[email protected]

* igt@gen3_render_tiledy_blits:
- shard-tglb: NOTRUN -> [SKIP][44] ([fdo#109289]) +1 similar issue
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb7/igt@gen3_render_tiledy_blits.html
- shard-iclb: NOTRUN -> [SKIP][45] ([fdo#109289]) +1 similar issue
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb3/igt@gen3_render_tiledy_blits.html

* igt@gen7_exec_parse@basic-allocation:
- shard-glk: NOTRUN -> [SKIP][46] ([fdo#109271]) +33 similar issues
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-glk4/igt@[email protected]

* igt@gen9_exec_parse@bb-large:
- shard-apl: NOTRUN -> [FAIL][47] ([i915#3296])
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl7/igt@[email protected]

* igt@gen9_exec_parse@secure-batches:
- shard-iclb: NOTRUN -> [SKIP][48] ([fdo#112306])
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb3/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][49] ([fdo#112306])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb1/igt@[email protected]

* igt@i915_suspend@fence-restore-untiled:
- shard-apl: [PASS][50] -> [DMESG-WARN][51] ([i915#180]) +1 similar issue
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-apl1/igt@[email protected]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl6/igt@[email protected]

* igt@kms_big_fb@linear-8bpp-rotate-270:
- shard-tglb: NOTRUN -> [SKIP][52] ([fdo#111614]) +1 similar issue
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][53] ([fdo#110725] / [fdo#111614]) +1 similar issue
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb1/igt@[email protected]

* igt@kms_big_fb@yf-tiled-32bpp-rotate-90:
- shard-tglb: NOTRUN -> [SKIP][54] ([fdo#111615])
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb3/igt@[email protected]

* igt@kms_big_joiner@invalid-modeset:
- shard-apl: NOTRUN -> [SKIP][55] ([fdo#109271] / [i915#2705])
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl7/igt@[email protected]

* igt@kms_chamelium@hdmi-hpd-with-enabled-mode:
- shard-kbl: NOTRUN -> [SKIP][56] ([fdo#109271] / [fdo#111827]) +9 similar issues
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl7/igt@[email protected]
- shard-snb: NOTRUN -> [SKIP][57] ([fdo#109271] / [fdo#111827]) +16 similar issues
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-snb7/igt@[email protected]

* igt@kms_color_chamelium@pipe-a-ctm-limited-range:
- shard-apl: NOTRUN -> [SKIP][58] ([fdo#109271] / [fdo#111827]) +23 similar issues
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl3/igt@[email protected]
- shard-glk: NOTRUN -> [SKIP][59] ([fdo#109271] / [fdo#111827]) +1 similar issue
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-glk6/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][60] ([fdo#109284] / [fdo#111827])
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb5/igt@[email protected]

* igt@kms_color_chamelium@pipe-d-ctm-max:
- shard-tglb: NOTRUN -> [SKIP][61] ([fdo#109284] / [fdo#111827]) +1 similar issue
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][62] ([fdo#109278] / [fdo#109284] / [fdo#111827])
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb4/igt@[email protected]

* igt@kms_content_protection@lic:
- shard-apl: NOTRUN -> [TIMEOUT][63] ([i915#1319])
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl3/igt@[email protected]

* igt@kms_cursor_crc@pipe-a-cursor-512x170-sliding:
- shard-tglb: NOTRUN -> [SKIP][64] ([fdo#109279] / [i915#3359])
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb8/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][65] ([fdo#109278] / [fdo#109279])
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb7/igt@[email protected]

* igt@kms_cursor_crc@pipe-b-cursor-32x10-random:
- shard-tglb: NOTRUN -> [SKIP][66] ([i915#3359]) +3 similar issues
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb5/igt@[email protected]

* igt@kms_cursor_crc@pipe-d-cursor-suspend:
- shard-kbl: NOTRUN -> [SKIP][67] ([fdo#109271]) +91 similar issues
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl7/igt@[email protected]

* igt@kms_fbcon_fbt@fbc-suspend:
- shard-kbl: [PASS][68] -> [INCOMPLETE][69] ([i915#155] / [i915#180] / [i915#636])
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-kbl7/igt@[email protected]
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl4/igt@[email protected]

* igt@kms_flip@2x-busy-flip:
- shard-tglb: NOTRUN -> [SKIP][70] ([fdo#111825]) +7 similar issues
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb7/igt@[email protected]

* igt@kms_flip@2x-plain-flip-fb-recreate-interruptible:
- shard-iclb: NOTRUN -> [SKIP][71] ([fdo#109274]) +2 similar issues
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb5/igt@[email protected]

* igt@kms_flip@flip-vs-expired-vblank@c-hdmi-a1:
- shard-glk: [PASS][72] -> [FAIL][73] ([i915#79])
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-glk4/igt@kms_flip@[email protected]
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-glk2/igt@kms_flip@[email protected]

* igt@kms_flip@flip-vs-suspend@c-dp1:
- shard-kbl: [PASS][74] -> [DMESG-WARN][75] ([i915#180]) +11 similar issues
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-kbl6/igt@kms_flip@[email protected]
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl7/igt@kms_flip@[email protected]

* igt@kms_flip_scaled_crc@flip-64bpp-ytile-to-32bpp-ytilercccs:
- shard-kbl: NOTRUN -> [SKIP][76] ([fdo#109271] / [i915#2672])
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl2/igt@[email protected]

* igt@kms_frontbuffer_tracking@psr-2p-primscrn-shrfb-plflip-blt:
- shard-iclb: NOTRUN -> [SKIP][77] ([fdo#109280]) +4 similar issues
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb2/igt@[email protected]

* igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d:
- shard-apl: NOTRUN -> [SKIP][78] ([fdo#109271] / [i915#533]) +2 similar issues
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl8/igt@[email protected]

* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-a-planes:
- shard-tglb: [PASS][79] -> [FAIL][80] ([i915#533])
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-tglb2/igt@[email protected]
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb6/igt@[email protected]
- shard-glk: [PASS][81] -> [FAIL][82] ([i915#533])
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-glk6/igt@[email protected]
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-glk1/igt@[email protected]
- shard-apl: NOTRUN -> [FAIL][83] ([i915#533])
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl1/igt@[email protected]
- shard-kbl: [PASS][84] -> [FAIL][85] ([i915#533])
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-kbl2/igt@[email protected]
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl1/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-a-alpha-7efc:
- shard-apl: NOTRUN -> [FAIL][86] ([fdo#108145] / [i915#265]) +1 similar issue
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl8/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-a-alpha-transparent-fb:
- shard-glk: NOTRUN -> [FAIL][87] ([i915#265])
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-glk6/igt@[email protected]

* igt@kms_plane_alpha_blend@pipe-d-constant-alpha-max:
- shard-iclb: NOTRUN -> [SKIP][88] ([fdo#109278]) +8 similar issues
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb4/igt@[email protected]

* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area-2:
- shard-apl: NOTRUN -> [SKIP][89] ([fdo#109271] / [i915#658]) +4 similar issues
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl3/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-3:
- shard-kbl: NOTRUN -> [SKIP][90] ([fdo#109271] / [i915#658]) +1 similar issue
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl2/igt@[email protected]

* igt@kms_psr@psr2_primary_mmap_cpu:
- shard-iclb: [PASS][91] -> [SKIP][92] ([fdo#109441]) +1 similar issue
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-iclb2/igt@kms_psr@psr2_primary_mmap_cpu.html
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb1/igt@kms_psr@psr2_primary_mmap_cpu.html

* igt@kms_psr@psr2_primary_render:
- shard-iclb: NOTRUN -> [SKIP][93] ([fdo#109441])
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb4/igt@kms_psr@psr2_primary_render.html

* igt@kms_vblank@pipe-d-ts-continuation-idle:
- shard-apl: NOTRUN -> [SKIP][94] ([fdo#109271]) +243 similar issues
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl3/igt@[email protected]

* igt@kms_writeback@writeback-invalid-parameters:
- shard-kbl: NOTRUN -> [SKIP][95] ([fdo#109271] / [i915#2437])
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl2/igt@[email protected]

* igt@nouveau_crc@pipe-a-source-outp-complete:
- shard-tglb: NOTRUN -> [SKIP][96] ([i915#2530]) +1 similar issue
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb8/igt@[email protected]

* igt@nouveau_crc@pipe-c-source-rg:
- shard-iclb: NOTRUN -> [SKIP][97] ([i915#2530]) +1 similar issue
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb3/igt@[email protected]

* igt@prime_nv_api@i915_self_import:
- shard-tglb: NOTRUN -> [SKIP][98] ([fdo#109291]) +1 similar issue
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb5/igt@prime_nv_api@i915_self_import.html
- shard-iclb: NOTRUN -> [SKIP][99] ([fdo#109291]) +1 similar issue
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb2/igt@prime_nv_api@i915_self_import.html

* igt@sysfs_clients@fair-7:
- shard-apl: NOTRUN -> [SKIP][100] ([fdo#109271] / [i915#2994]) +3 similar issues
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-apl7/igt@[email protected]

* igt@sysfs_clients@sema-50:
- shard-kbl: NOTRUN -> [SKIP][101] ([fdo#109271] / [i915#2994]) +1 similar issue
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl7/igt@[email protected]

#### Possible fixes ####

* igt@gem_eio@unwedge-stress:
- shard-tglb: [TIMEOUT][102] ([i915#2369] / [i915#3063]) -> [PASS][103]
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-tglb8/igt@[email protected]
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb5/igt@[email protected]
- shard-iclb: [TIMEOUT][104] ([i915#2369] / [i915#2481] / [i915#3070]) -> [PASS][105]
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-iclb3/igt@[email protected]
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb2/igt@[email protected]

* igt@gem_exec_fair@basic-pace@vcs1:
- shard-kbl: [FAIL][106] ([i915#2842]) -> [PASS][107]
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-kbl2/igt@gem_exec_fair@[email protected]
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl3/igt@gem_exec_fair@[email protected]
- shard-tglb: [FAIL][108] ([i915#2842]) -> [PASS][109]
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-tglb2/igt@gem_exec_fair@[email protected]
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb3/igt@gem_exec_fair@[email protected]

* igt@gem_exec_fair@basic-throttle@rcs0:
- shard-glk: [FAIL][110] ([i915#2842]) -> [PASS][111] +2 similar issues
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-glk8/igt@gem_exec_fair@[email protected]
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-glk3/igt@gem_exec_fair@[email protected]
- shard-iclb: [FAIL][112] ([i915#2849]) -> [PASS][113]
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-iclb4/igt@gem_exec_fair@[email protected]
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb1/igt@gem_exec_fair@[email protected]

* igt@gem_mmap_gtt@big-copy-xy:
- shard-glk: [FAIL][114] ([i915#307]) -> [PASS][115]
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-glk3/igt@[email protected]
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-glk1/igt@[email protected]

* igt@gem_mmap_gtt@cpuset-big-copy-xy:
- shard-iclb: [FAIL][116] ([i915#307]) -> [PASS][117]
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-iclb3/igt@[email protected]
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb6/igt@[email protected]

* igt@i915_suspend@debugfs-reader:
- shard-kbl: [DMESG-WARN][118] ([i915#180]) -> [PASS][119]
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-kbl4/igt@[email protected]
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl1/igt@[email protected]

* igt@kms_async_flips@test-time-stamp:
- shard-tglb: [FAIL][120] ([i915#2574]) -> [PASS][121]
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-tglb3/igt@[email protected]
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-tglb2/igt@[email protected]

* igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-indfb-draw-mmap-wc:
- shard-glk: [FAIL][122] ([i915#49]) -> [PASS][123]
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-glk8/igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-indfb-draw-mmap-wc.html
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-glk6/igt@kms_frontbuffer_tracking@fbc-2p-scndscrn-pri-indfb-draw-mmap-wc.html

* igt@kms_plane_cursor@pipe-b-viewport-size-128:
- shard-snb: [SKIP][124] ([fdo#109271]) -> [PASS][125]
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-snb7/igt@[email protected]
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-snb2/igt@[email protected]

* igt@kms_psr@psr2_no_drrs:
- shard-iclb: [SKIP][126] ([fdo#109441]) -> [PASS][127] +2 similar issues
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-iclb8/igt@kms_psr@psr2_no_drrs.html
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb2/igt@kms_psr@psr2_no_drrs.html

#### Warnings ####

* igt@gem_exec_fair@basic-pace@vecs0:
- shard-kbl: [FAIL][128] ([i915#2842]) -> [SKIP][129] ([fdo#109271])
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-kbl2/igt@gem_exec_fair@[email protected]
[129]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl3/igt@gem_exec_fair@[email protected]

* igt@i915_pm_rc6_residency@rc6-fence:
- shard-iclb: [WARN][130] ([i915#1804] / [i915#2684]) -> [WARN][131] ([i915#2681] / [i915#2684])
[130]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-iclb6/igt@[email protected]
[131]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb8/igt@[email protected]

* igt@i915_pm_rc6_residency@rc6-idle:
- shard-iclb: [WARN][132] ([i915#1804] / [i915#2684]) -> [FAIL][133] ([i915#2680])
[132]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-iclb4/igt@[email protected]
[133]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb3/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-1:
- shard-iclb: [SKIP][134] ([i915#658]) -> [SKIP][135] ([i915#2920]) +1 similar issue
[134]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-iclb6/igt@[email protected]
[135]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb2/igt@[email protected]

* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-2:
- shard-iclb: [SKIP][136] ([i915#2920]) -> [SKIP][137] ([i915#658]) +2 similar issues
[136]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-iclb2/igt@[email protected]
[137]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-iclb3/igt@[email protected]

* igt@runner@aborted:
- shard-kbl: ([FAIL][138], [FAIL][139], [FAIL][140], [FAIL][141]) ([i915#180] / [i915#1814] / [i915#3002]) -> ([FAIL][142], [FAIL][143], [FAIL][144], [FAIL][145], [FAIL][146], [FAIL][147], [FAIL][148], [FAIL][149], [FAIL][150], [FAIL][151], [FAIL][152]) ([i915#1436] / [i915#180] / [i915#1814] / [i915#3002] / [i915#92])
[138]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-kbl2/igt@[email protected]
[139]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-kbl2/igt@[email protected]
[140]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-kbl4/igt@[email protected]
[141]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_10007/shard-kbl4/igt@[email protected]
[142]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl7/igt@[email protected]
[143]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl2/igt@[email protected]
[144]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl2/igt@[email protected]
[145]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl2/igt@[email protected]
[146]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl4/igt@[email protected]
[147]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl4/igt@[email protected]
[148]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl4/igt@[email protected]
[149]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl7/igt@[email protected]
[150]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/shard-kbl7/igt@[email protected]

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5764/index.html

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#19 lore raw
In reply to Bhanuprakash Modem
Quoted 47 lines

From: Modem, Bhanuprakash <[email protected]>
Sent: Monday, April 26, 2021 11:51 PM
To: [email protected]
Cc: Modem, Bhanuprakash <[email protected]>; Deak, Imre <[email protected]>; Nautiyal, Ankit K <[email protected]>; Daniel Vetter <[email protected]>
Subject: [v3 i-g-t 00/14] Fix mode selection for 2x tests

When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.

This series will find a combination of modes that fit into the BW.

IGT core helper would override the mode on all connectors that will be modeset by the next igt_display_commit() call in the test. These are all the connectors in igt_display_t that have a pending_pipe set by the test up to the point of calling this helper.

For 1x tests, cleanup the state before exiting the test.

Follow-up:
As modeset will happen one by one, we can't apply this approach on tests/kms_flip.c & tests/kms_setmode.c

Cc Imre Deak <[email protected]>
Cc Ankit Nautiyal <[email protected]>
Cc Daniel Vetter <[email protected]>

Bhanuprakash Modem (14):
lib/igt_kms: helper to override the mode on all connectors tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests tests/kms_cursor_legacy: Fix mode selection for 2x tests tests/debugfs_test: Fix mode selection for MST tests/kms_content_protection: Fix mode selection for 2x tests tests/kms_plane_scaling: Fix mode selection for 2x tests tests/kms_atomic_transition: Fix mode selection for 2x tests tests/kms_plane: Reset the state before exiting the test tests/kms_plane_alpha_blend: Reset the state before exiting the test tests/kms_cursor_edge_walk: Reset the state before exiting the test tests/kms_plane_lowres: Reset the state before exiting the test tests/kms_plane_cursor: Reset the state before exiting the test tests/kms_flip_scaled_crc: Reset the state before exiting the test tests/kms_vblank: Reset the state before exiting the test

Quoted 16 lines
 lib/igt_kms.c                    | 55 ++++++++++++++++++++++++++++++++
 lib/igt_kms.h                    |  1 +
 tests/debugfs_test.c             | 10 ++++++
 tests/kms_atomic_transition.c    | 10 ++++++
 tests/kms_content_protection.c   | 41 ++++++++++--------------
 tests/kms_cursor_edge_walk.c     |  3 ++
 tests/kms_cursor_legacy.c        | 47 +++++++++++++++++++++++++--
 tests/kms_flip_scaled_crc.c      |  5 +++
 tests/kms_frontbuffer_tracking.c | 33 +++++++++++++++++++
 tests/kms_plane.c                | 19 +++++++----
 tests/kms_plane_alpha_blend.c    |  5 +--
 tests/kms_plane_cursor.c         |  4 +++
 tests/kms_plane_lowres.c         |  9 ++----
 tests/kms_plane_scaling.c        | 15 +++++++--
 tests/kms_vblank.c               |  2 ++
 15 files changed, 214 insertions(+), 45 deletions(-)

@Imre/@Daniel, if possible can you please review this series?

Quoted 3 lines

--
2.20.1

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev