Fix mode selection for 2x tests
cover Fix mode selection for 2x tests
When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.
This series will find a combination of modes that fit into the BW.
By parsing the PATH property, we can add a link_group_id field to igt_output_t to identify all connectors that shares the BW of the same link.
Parsing the PATH property consists of finding all connectors with the same X prefix in the X-Y[-Z...] path property format and assigning a unique non-zero link_group_id to all such connectors. Connectors without a PATH property are not an MST output, so their link_group_id can be left at 0.
IGT core helper would override the mode on all connectors that will be modeset by the next igt_display_commit() call in the test. These are all the connectors in igt_display_t that have a pending_pipe set by the test up to the point of calling this helper.
Bhanuprakash Modem (5):
lib/igt_kms: Add a support to read PATH connector property lib/igt_kms: Identify outputs that shares link bandwidth lib/igt_kms: helper to override the mode on all connectors tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests tests/kms_cursor_legacy: Fix mode selection for 2x tests
lib/igt_kms.c | 71 ++++++++++++++++++++++++++++++++ lib/igt_kms.h | 3 ++ tests/kms_cursor_legacy.c | 53 ++++++++++++++++++++++-- tests/kms_frontbuffer_tracking.c | 35 ++++++++++++++++ 4 files changed, 159 insertions(+), 3 deletions(-)
--
2.20.1
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 1/5 lib/igt_kms: Add a support to read PATH connector property
Add a support to read the connector property "PATH"
--- lib/igt_kms.c | 1 + lib/igt_kms.h | 1 + 2 files changed, 2 insertions(+)
lib/igt_kms.c +1 -0
@@ -426,6 +426,7 @@ const char * const igt_connector_prop_names[IGT_NUM_CONNECTOR_PROPS] = { [IGT_CONNECTOR_WRITEBACK_FB_ID] = "WRITEBACK_FB_ID", [IGT_CONNECTOR_WRITEBACK_OUT_FENCE_PTR] = "WRITEBACK_OUT_FENCE_PTR", [IGT_CONNECTOR_DITHERING_MODE] = "dithering mode", + [IGT_CONNECTOR_PATH] = "PATH", };/*
lib/igt_kms.h +1 -0
@@ -132,6 +132,7 @@ enum igt_atomic_connector_properties {IGT_CONNECTOR_WRITEBACK_FB_ID ,IGT_CONNECTOR_WRITEBACK_OUT_FENCE_PTR ,IGT_CONNECTOR_DITHERING_MODE , +IGT_CONNECTOR_PATH , IGT_NUM_CONNECTOR_PROPS };
Signature · 6 lines
2.20.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 2/5 lib/igt_kms: Identify outputs that shares link bandwidth
In reply to Bhanuprakash ModemWe have to read the PATH property and parse it to identify the connector that shares the BW of the same link. Parsing the PATH property consists of finding all connectors with the same X prefix in the X-Y[-Z...] path property format and assigning a unique non-zero link_group_id to all such connectors.
Connectors without a PATH property are not an MST output, so their link_group_id can be left at 0.
v2:
Update the link_group_id in igt_output_refresh(). (Ankit)
--- lib/igt_kms.c | 29 +++++++++++++++++++++++++++++ lib/igt_kms.h | 1 + 2 files changed, 30 insertions(+)
lib/igt_kms.c +29 -0
@@ -1684,6 +1684,32 @@ static void igt_display_log_shift(igt_display_t *display, int shift)igt_assert (display->log_shift >=0 ); } +static +void igt_update_output_link_group_id (int drmfd,igt_output_t *output) +{ +uint64_t blob_id; +drmModePropertyBlobPtr blob; +char *temp; + +if (!igt_output_has_prop (output,IGT_CONNECTOR_PATH )) { + output->link_group_id =0 ; +return ; + } + + blob_id =igt_output_get_prop (output,IGT_CONNECTOR_PATH ); + blob =drmModeGetPropertyBlob (drmfd, blob_id); +igt_assert (blob); + + temp =strtok ((char *)blob->data,":" ); +if (strcmp (temp,"mst" ) ==0 ) + output->link_group_id =atoi (strtok (NULL ,"-" )); +else + output->link_group_id =0 ; + +drmModeFreePropertyBlob (blob); +return ; +} +void igt_output_refresh (igt_output_t *output) {igt_display_t *display = output->display;
@@ -1709,6 +1735,9 @@ void igt_output_refresh(igt_output_t *output)igt_atomic_fill_connector_props (display, output,IGT_NUM_CONNECTOR_PROPS , igt_connector_prop_names); +/* Identify all connectors that share the BW of the same link */ +igt_update_output_link_group_id (display->drm_fd, output); +LOG (display,"%s: Selecting pipe %s\n" , output->name,kmstest_pipe_name (output->pending_pipe)); }
lib/igt_kms.h +1 -0
@@ -386,6 +386,7 @@ typedef struct {drmModeModeInfo override_mode;int32_t writeback_out_fence_fd; +int link_group_id;/* bitmask of changed properties */ uint64_t changed;
Signature · 6 lines
2.20.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 3/5 lib/igt_kms: helper to override the mode on all connectors
In reply to Bhanuprakash ModemThis helper will iterate through all connectors those have a pending_pipe != PIPE_NONE set by the test upto the point of calling this helper. And find the combination using the most bandwidth by ATOMIC_TEST_ONLY then return to the test.
This helper would override the mode on all connectors that will be modeset by the next igt_display_commit() call in the test.
--- lib/igt_kms.c | 41 +++++++++++++++++++++++++++++++++++++++++ lib/igt_kms.h | 1 + 2 files changed, 42 insertions(+)
lib/igt_kms.c +41 -0
@@ -3871,6 +3871,47 @@ void igt_output_set_pipe(igt_output_t *output, enum pipe pipe) } } +#define for_each_connector_mode (output) \ + for (int i__ = 0; i__ < output->config.connector->count_modes; i__++) + +static +bool __override_all_active_output_modes_to_fit_link_bw (igt_display_t *display,int base) +{ +for ( ; base < display->n_outputs; base++) { +igt_output_t *output = &display->outputs[base]; + +if (output->pending_pipe ==PIPE_NONE || + output->link_group_id <=0 ) +continue ; + +for_each_connector_mode (output) { +igt_output_override_mode (output, &output->config.connector->modes[i__]); +if (__override_all_active_output_modes_to_fit_link_bw (display, base +1 )) +return true; + +if (igt_display_try_commit_atomic (display, +DRM_MODE_ATOMIC_TEST_ONLY | +DRM_MODE_ATOMIC_ALLOW_MODESET , +NULL ) ==0 ) +return true; + } + } +return false; +} + +/** +* override_all_active_output_modes_to_fit_link_bw: +* @display: a pointer to an #igt_display_t structure +* +* Override the mode on all connectors those are sharing the link bw +* +* Returns: true if a valid connector mode combo found, else false +*/ +bool override_all_active_output_modes_to_fit_link_bw (igt_display_t *display) +{ +return __override_all_active_output_modes_to_fit_link_bw (display,0 ); +} +/* * igt_pipe_refresh: * @display: a pointer to an #igt_display_t structure
lib/igt_kms.h +1 -0
@@ -894,5 +894,6 @@ void igt_require_pipe(igt_display_t *display,void igt_dump_connectors_fd (int drmfd);void igt_dump_crtcs_fd (int drmfd); +bool override_all_active_output_modes_to_fit_link_bw (igt_display_t *display);#endif /* __IGT_KMS_H__ */
Signature · 6 lines
2.20.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 4/5 tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests
In reply to Bhanuprakash ModemWhen two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.
This patch will find a combination of modes that fit into the BW.
--- tests/kms_frontbuffer_tracking.c | 35 ++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
tests/kms_frontbuffer_tracking.c +35 -0
@@ -1683,6 +1683,33 @@ static void enable_prim_screen_and_wait(const struct test_mode *t)do_assertions (ASSERT_NO_ACTION_CHANGE ); } +static void update_modeset_cached_params (void ) +{ +bool found = false; + +igt_output_set_pipe (prim_mode_params.output, prim_mode_params.pipe); +igt_output_set_pipe (scnd_mode_params.output, scnd_mode_params.pipe); + + found =override_all_active_output_modes_to_fit_link_bw (&drm.display); +igt_require_f (found,"No valid mode combo found.\n" ); + + prim_mode_params.mode_copy = *igt_output_get_mode (prim_mode_params.output); + prim_mode_params.mode = &prim_mode_params.mode_copy; + prim_mode_params.primary.w = prim_mode_params.mode->hdisplay; + prim_mode_params.primary.h = prim_mode_params.mode->vdisplay; + + scnd_mode_params.mode_copy = *igt_output_get_mode (scnd_mode_params.output); + scnd_mode_params.mode = &scnd_mode_params.mode_copy; + scnd_mode_params.primary.w = scnd_mode_params.mode->hdisplay; + scnd_mode_params.primary.h = scnd_mode_params.mode->vdisplay; + +fill_fb_region (&prim_mode_params.primary,COLOR_PRIM_BG ); +fill_fb_region (&scnd_mode_params.primary,COLOR_SCND_BG ); + +__set_mode_for_params (&prim_mode_params); +__set_mode_for_params (&scnd_mode_params); +} +static void enable_both_screens_and_wait (const struct test_mode *t) {fill_fb_region (&prim_mode_params.primary,COLOR_PRIM_BG );
@@ -1691,6 +1718,14 @@ static void enable_both_screens_and_wait(const struct test_mode *t)__set_mode_for_params (&prim_mode_params);__set_mode_for_params (&scnd_mode_params); +if (prim_mode_params.output->link_group_id !=0 && + prim_mode_params.output->link_group_id == scnd_mode_params.output->link_group_id && +igt_display_try_commit_atomic (&drm.display, +DRM_MODE_ATOMIC_TEST_ONLY | +DRM_MODE_ATOMIC_ALLOW_MODESET , +NULL ) !=0 ) +update_modeset_cached_params (); +igt_display_commit2 (&drm.display, drm.display.is_atomic ?COMMIT_ATOMIC :COMMIT_LEGACY ); wanted_crc = &blue_crcs[t->format].crc;
--
2.20.1
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 5/5 tests/kms_cursor_legacy: Fix mode selection for 2x tests
In reply to Bhanuprakash ModemWhen two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.
This patch will find a combination of modes that fit into the BW.
--- tests/kms_cursor_legacy.c | 53 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 50 insertions(+), 3 deletions(-)
tests/kms_cursor_legacy.c +50 -3
@@ -50,6 +50,15 @@ IGT_TEST_DESCRIPTION("Stress legacy cursor ioctl");igt_pipe_crc_t *pipe_crc; +static void override_output_modes (igt_display_t *display,igt_output_t *output,igt_output_t *output2) +{ +bool found =override_all_active_output_modes_to_fit_link_bw (display); +igt_require_f (found,"No valid mode combo found.\n" ); + + output->pending_pipe =PIPE_NONE ; + output2->pending_pipe =PIPE_NONE ; +} +static void stress (igt_display_t *display,enum pipe pipe,int num_children,unsigned mode,int timeout)
@@ -393,6 +402,7 @@ static void flip(igt_display_t *display,struct drm_mode_cursor arg[2 ];uint64_t *results;struct igt_fb fb_info, fb_info2, argb_fb, cursor_fb, cursor_fb2; +igt_output_t *output, *output2; results =mmap (NULL ,PAGE_SIZE ,PROT_WRITE ,MAP_SHARED |MAP_ANON ,-1 ,0 );igt_assert (results !=MAP_FAILED );
@@ -406,9 +416,22 @@ static void flip(igt_display_t *display,if (mode >= flip_test_atomic)igt_require (display->is_atomic); -igt_require (set_fb_on_crtc (display, flip_pipe, &fb_info)); -if (flip_pipe != cursor_pipe) -igt_require (set_fb_on_crtc (display, cursor_pipe, &fb_info2)); +igt_require ((output =set_fb_on_crtc (display, flip_pipe, &fb_info))); +if (flip_pipe != cursor_pipe) { +igt_require ((output2 =set_fb_on_crtc (display, cursor_pipe, &fb_info2))); + +if (output->link_group_id !=0 && + output->link_group_id == output2->link_group_id && +igt_display_try_commit_atomic (display, +DRM_MODE_ATOMIC_TEST_ONLY | +DRM_MODE_ATOMIC_ALLOW_MODESET , +NULL ) !=0 ) { +override_output_modes (display, output, output2); + +igt_require ((output =set_fb_on_crtc (display, flip_pipe, &fb_info))); +igt_require ((output2 =set_fb_on_crtc (display, cursor_pipe, &fb_info2))); + } + }igt_create_color_fb (display->drm_fd, fb_info.width, fb_info.height,DRM_FORMAT_ARGB8888 ,0 ,.5 ,.5 ,.5 , &cursor_fb);
@@ -879,6 +902,18 @@ static void two_screens_flip_vs_cursor(igt_display_t *display, int nloops, booligt_require ((output =set_fb_on_crtc (display, pipe, &fb_info)));igt_require ((output2 =set_fb_on_crtc (display, pipe2, &fb2_info))); +if (output->link_group_id !=0 && + output->link_group_id == output2->link_group_id && +igt_display_try_commit_atomic (display, +DRM_MODE_ATOMIC_TEST_ONLY | +DRM_MODE_ATOMIC_ALLOW_MODESET , +NULL ) !=0 ) { +override_output_modes (display, output, output2); + +igt_require ((output =set_fb_on_crtc (display, pipe, &fb_info))); +igt_require ((output2 =set_fb_on_crtc (display, pipe2, &fb2_info))); + } +igt_create_color_fb (display->drm_fd,64 ,64 ,DRM_FORMAT_ARGB8888 ,0 ,1. ,1. ,1. , &cursor_fb);set_cursor_on_pipe (display, pipe, &cursor_fb);populate_cursor_args (display, pipe, arg1, &cursor_fb);
@@ -1129,6 +1164,18 @@ static void two_screens_cursor_vs_flip(igt_display_t *display, int nloops, booligt_require ((outputs[0 ] =set_fb_on_crtc (display, pipe[0 ], &fb_info[0 ])));igt_require ((outputs[1 ] =set_fb_on_crtc (display, pipe[1 ], &fb_info[1 ]))); +if (outputs[0 ]->link_group_id !=0 && + outputs[0 ]->link_group_id == outputs[1 ]->link_group_id && +igt_display_try_commit_atomic (display, +DRM_MODE_ATOMIC_TEST_ONLY | +DRM_MODE_ATOMIC_ALLOW_MODESET , +NULL ) !=0 ) { +override_output_modes (display, outputs[0 ], outputs[1 ]); + +igt_require ((outputs[0 ] =set_fb_on_crtc (display, pipe[0 ], &fb_info[0 ]))); +igt_require ((outputs[1 ] =set_fb_on_crtc (display, pipe[1 ], &fb_info[1 ]))); + } +igt_create_color_fb (display->drm_fd,64 ,64 ,DRM_FORMAT_ARGB8888 ,0 ,1. ,1. ,1. , &cursor_fb);set_cursor_on_pipe (display, pipe[0 ], &cursor_fb);
--
2.20.1
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for Fix mode selection for 2x tests
In reply to Bhanuprakash Modem== Series Details ==
== Series Details ==
Series: Fix mode selection for 2x tests
URL : https://patchwork.freedesktop.org/series/88902/
State : success
== Summary ==
CI Bug Log - changes from IGT_6063 -> IGTPW_5724
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_5724:
### IGT changes ###
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.
* igt@i915_selftest@live@gem_contexts:
- {fi-cml-drallion}: NOTRUN -> [DMESG-FAIL][1]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-cml-drallion/igt@i915_selftest@live@gem_contexts.html
Known issues
------------
Here are the changes found in IGTPW_5724 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_basic@cs-gfx:
- fi-kbl-soraka: NOTRUN -> [SKIP][2] ([fdo#109271]) +17 similar issues
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-kbl-soraka/igt@amdgpu/[email protected]
* igt@amdgpu/amd_basic@semaphore:
- fi-icl-y: NOTRUN -> [SKIP][3] ([fdo#109315]) +17 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-icl-y/igt@amdgpu/[email protected]
* igt@gem_huc_copy@huc-copy:
- fi-skl-guc: NOTRUN -> [SKIP][4] ([fdo#109271] / [i915#2190])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-skl-guc/igt@[email protected]
- fi-icl-y: NOTRUN -> [SKIP][5] ([i915#2190])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-icl-y/igt@[email protected]
* igt@gem_linear_blits@basic:
- fi-tgl-y: [PASS][6] -> [DMESG-WARN][7] ([i915#402])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/fi-tgl-y/igt@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-tgl-y/igt@[email protected]
* igt@kms_chamelium@dp-crc-fast:
- fi-skl-guc: NOTRUN -> [SKIP][8] ([fdo#109271] / [fdo#111827]) +8 similar issues
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-skl-guc/igt@[email protected]
- fi-icl-y: NOTRUN -> [SKIP][9] ([fdo#109284] / [fdo#111827]) +8 similar issues
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-icl-y/igt@[email protected]
* igt@kms_force_connector_basic@force-load-detect:
- fi-icl-y: NOTRUN -> [SKIP][10] ([fdo#109285])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-icl-y/igt@[email protected]
* igt@kms_pipe_crc_basic@compare-crc-sanitycheck-pipe-d:
- fi-icl-y: NOTRUN -> [SKIP][11] ([fdo#109278])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-icl-y/igt@[email protected]
- fi-skl-guc: NOTRUN -> [SKIP][12] ([fdo#109271] / [i915#533])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-skl-guc/igt@[email protected]
* igt@kms_psr@primary_mmap_gtt:
- fi-skl-guc: NOTRUN -> [SKIP][13] ([fdo#109271]) +26 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-skl-guc/igt@kms_psr@primary_mmap_gtt.html
- fi-icl-y: NOTRUN -> [SKIP][14] ([fdo#110189]) +3 similar issues
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-icl-y/igt@kms_psr@primary_mmap_gtt.html
* igt@prime_vgem@basic-userptr:
- fi-icl-y: NOTRUN -> [SKIP][15] ([i915#3301])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-icl-y/igt@[email protected]
#### Possible fixes ####
* igt@fbdev@write:
- fi-tgl-y: [DMESG-WARN][16] ([i915#402]) -> [PASS][17]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/fi-tgl-y/igt@[email protected]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-tgl-y/igt@[email protected]
* igt@i915_selftest@live@late_gt_pm:
- fi-kbl-soraka: [INCOMPLETE][18] -> [PASS][19]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/fi-kbl-soraka/igt@i915_selftest@live@late_gt_pm.html
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/fi-kbl-soraka/igt@i915_selftest@live@late_gt_pm.html
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#110189]: https://bugs.freedesktop.org/show_bug.cgi?id=110189
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1208]: https://gitlab.freedesktop.org/drm/intel/issues/1208
[i915#1849]: https://gitlab.freedesktop.org/drm/intel/issues/1849
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#3180]: https://gitlab.freedesktop.org/drm/intel/issues/3180
[i915#3278]: https://gitlab.freedesktop.org/drm/intel/issues/3278
[i915#3301]: https://gitlab.freedesktop.org/drm/intel/issues/3301
[i915#3303]: https://gitlab.freedesktop.org/drm/intel/issues/3303
[i915#402]: https://gitlab.freedesktop.org/drm/intel/issues/402
[i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533
Participating hosts (44 -> 40)
------------------------------
Additional (3): fi-icl-y fi-skl-guc fi-cml-drallion
Missing (7): fi-ilk-m540 fi-hsw-4200u fi-bsw-n3050 fi-bsw-cyan fi-ctg-p8600 fi-dg1-1 fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* IGT: IGT_6063 -> IGTPW_5724
CI-20190529: 20190529
CI_DRM_9949: caf1e8d36f0bdd43bfd47e5a6f46d4b691d284e3 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_5724: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/index.html
IGT_6063: d3b7f74ce5df6fdea03e490b7c64f0c6bfe76f03 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for Fix mode selection for 2x tests
In reply to Bhanuprakash Modem== Series Details ==
== Series Details ==
Series: Fix mode selection for 2x tests
URL : https://patchwork.freedesktop.org/series/88902/
State : success
== Summary ==
CI Bug Log - changes from IGT_6063_full -> IGTPW_5724_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/index.html
Known issues
------------
Here are the changes found in IGTPW_5724_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_create@create-clear:
- shard-glk: [PASS][1] -> [FAIL][2] ([i915#3160])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-glk7/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-glk4/igt@[email protected]
* igt@gem_create@create-massive:
- shard-snb: NOTRUN -> [DMESG-WARN][3] ([i915#3002])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-snb6/igt@[email protected]
- shard-kbl: NOTRUN -> [DMESG-WARN][4] ([i915#3002])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl7/igt@[email protected]
- shard-apl: NOTRUN -> [DMESG-WARN][5] ([i915#3002])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl1/igt@[email protected]
* igt@gem_ctx_persistence@legacy-engines-mixed:
- shard-snb: NOTRUN -> [SKIP][6] ([fdo#109271] / [i915#1099]) +6 similar issues
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-snb5/igt@[email protected]
* igt@gem_eio@unwedge-stress:
- shard-snb: NOTRUN -> [FAIL][7] ([i915#3354])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-snb6/igt@[email protected]
* igt@gem_exec_fair@basic-pace@rcs0:
- shard-kbl: [PASS][8] -> [FAIL][9] ([i915#2842]) +3 similar issues
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-kbl3/igt@gem_exec_fair@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl3/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-throttle@rcs0:
- shard-glk: [PASS][10] -> [FAIL][11] ([i915#2842]) +1 similar issue
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-glk5/igt@gem_exec_fair@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-glk6/igt@gem_exec_fair@[email protected]
* igt@gem_exec_reloc@basic-wide-active@rcs0:
- shard-snb: NOTRUN -> [FAIL][12] ([i915#2389]) +2 similar issues
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-snb6/igt@gem_exec_reloc@[email protected]
* igt@gem_exec_reloc@basic-wide-active@vcs1:
- shard-iclb: NOTRUN -> [FAIL][13] ([i915#2389])
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb4/igt@gem_exec_reloc@[email protected]
* igt@gem_huc_copy@huc-copy:
- shard-apl: NOTRUN -> [SKIP][14] ([fdo#109271] / [i915#2190])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl7/igt@[email protected]
* igt@gem_pwrite@basic-exhaustion:
- shard-snb: NOTRUN -> [WARN][15] ([i915#2658])
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-snb5/igt@[email protected]
* igt@gem_userptr_blits@process-exit-mmap@wb:
- shard-apl: NOTRUN -> [SKIP][16] ([fdo#109271] / [i915#1699]) +3 similar issues
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl1/igt@gem_userptr_blits@[email protected]
* igt@gem_userptr_blits@readonly-unsync:
- shard-tglb: NOTRUN -> [SKIP][17] ([i915#3297])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-tglb6/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][18] ([i915#3297])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb6/igt@[email protected]
* igt@gem_userptr_blits@set-cache-level:
- shard-snb: NOTRUN -> [FAIL][19] ([i915#3324])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-snb2/igt@[email protected]
- shard-apl: NOTRUN -> [FAIL][20] ([i915#3324])
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl6/igt@[email protected]
* igt@gem_workarounds@suspend-resume:
- shard-snb: [PASS][21] -> [TIMEOUT][22] ([i915#2808])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-snb2/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-snb7/igt@[email protected]
* igt@gem_workarounds@suspend-resume-fd:
- shard-kbl: [PASS][23] -> [DMESG-WARN][24] ([i915#180]) +1 similar issue
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-kbl4/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl7/igt@[email protected]
* igt@gen7_exec_parse@basic-rejected:
- shard-tglb: NOTRUN -> [SKIP][25] ([fdo#109289])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-tglb2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][26] ([fdo#109289])
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb3/igt@[email protected]
* igt@gen9_exec_parse@batch-invalid-length:
- shard-snb: NOTRUN -> [SKIP][27] ([fdo#109271]) +331 similar issues
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-snb2/igt@[email protected]
* igt@i915_pm_dc@dc6-dpms:
- shard-kbl: NOTRUN -> [FAIL][28] ([i915#454])
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl3/igt@[email protected]
* igt@i915_pm_lpsp@kms-lpsp@kms-lpsp-dp:
- shard-apl: NOTRUN -> [SKIP][29] ([fdo#109271] / [i915#1937])
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl8/igt@i915_pm_lpsp@[email protected]
* igt@i915_pm_rc6_residency@rc6-fence:
- shard-tglb: NOTRUN -> [WARN][30] ([i915#2681])
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-tglb2/igt@[email protected]
- shard-iclb: NOTRUN -> [WARN][31] ([i915#1804] / [i915#2684])
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb4/igt@[email protected]
* igt@i915_pm_rpm@modeset-lpsp-stress:
- shard-apl: NOTRUN -> [SKIP][32] ([fdo#109271]) +205 similar issues
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl6/igt@[email protected]
* igt@i915_suspend@fence-restore-untiled:
- shard-apl: [PASS][33] -> [DMESG-WARN][34] ([i915#180])
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-apl2/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl2/igt@[email protected]
* igt@kms_big_fb@x-tiled-32bpp-rotate-270:
- shard-iclb: NOTRUN -> [SKIP][35] ([fdo#110725] / [fdo#111614]) +1 similar issue
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb4/igt@[email protected]
* igt@kms_big_fb@y-tiled-8bpp-rotate-90:
- shard-glk: NOTRUN -> [SKIP][36] ([fdo#109271]) +14 similar issues
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-glk4/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][37] ([fdo#111614]) +1 similar issue
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-tglb5/igt@[email protected]
* igt@kms_big_fb@yf-tiled-32bpp-rotate-270:
- shard-tglb: NOTRUN -> [SKIP][38] ([fdo#111615])
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-tglb6/igt@[email protected]
* igt@kms_chamelium@hdmi-edid-change-during-suspend:
- shard-apl: NOTRUN -> [SKIP][39] ([fdo#109271] / [fdo#111827]) +21 similar issues
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl6/igt@[email protected]
* igt@kms_chamelium@vga-hpd-without-ddc:
- shard-snb: NOTRUN -> [SKIP][40] ([fdo#109271] / [fdo#111827]) +16 similar issues
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-snb6/igt@[email protected]
* igt@kms_color_chamelium@pipe-b-degamma:
- shard-glk: NOTRUN -> [SKIP][41] ([fdo#109271] / [fdo#111827])
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-glk9/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][42] ([fdo#109284] / [fdo#111827])
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-tglb2/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][43] ([fdo#109284] / [fdo#111827])
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb4/igt@[email protected]
* igt@kms_color_chamelium@pipe-c-ctm-0-25:
- shard-kbl: NOTRUN -> [SKIP][44] ([fdo#109271] / [fdo#111827]) +10 similar issues
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl7/igt@[email protected]
* igt@kms_content_protection@lic:
- shard-kbl: NOTRUN -> [TIMEOUT][45] ([i915#1319])
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl7/igt@[email protected]
* igt@kms_content_protection@uevent:
- shard-apl: NOTRUN -> [FAIL][46] ([i915#2105])
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl7/igt@[email protected]
* igt@kms_cursor_crc@pipe-c-cursor-512x512-onscreen:
- shard-tglb: NOTRUN -> [SKIP][47] ([fdo#109279] / [i915#3359])
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-tglb3/igt@[email protected]
- shard-iclb: NOTRUN -> [SKIP][48] ([fdo#109278] / [fdo#109279])
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb5/igt@[email protected]
* igt@kms_cursor_crc@pipe-c-cursor-64x64-random:
- shard-kbl: [PASS][49] -> [FAIL][50] ([i915#54])
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-kbl7/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl3/igt@[email protected]
- shard-apl: NOTRUN -> [FAIL][51] ([i915#54]) +1 similar issue
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl8/igt@[email protected]
- shard-glk: [PASS][52] -> [FAIL][53] ([i915#54])
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-glk2/igt@[email protected]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-glk9/igt@[email protected]
* igt@kms_cursor_crc@pipe-d-cursor-256x85-onscreen:
- shard-iclb: NOTRUN -> [SKIP][54] ([fdo#109278]) +2 similar issues
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb6/igt@[email protected]
* igt@kms_cursor_crc@pipe-d-cursor-suspend:
- shard-kbl: NOTRUN -> [SKIP][55] ([fdo#109271]) +103 similar issues
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl6/igt@[email protected]
* igt@kms_cursor_legacy@pipe-d-torture-bo:
- shard-kbl: NOTRUN -> [SKIP][56] ([fdo#109271] / [i915#533]) +1 similar issue
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl7/igt@[email protected]
* igt@kms_draw_crc@draw-method-rgb565-render-ytiled:
- shard-glk: [PASS][57] -> [FAIL][58] ([i915#52] / [i915#54]) +2 similar issues
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-glk9/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-glk7/igt@[email protected]
* igt@kms_draw_crc@draw-method-xrgb8888-pwrite-xtiled:
- shard-glk: NOTRUN -> [FAIL][59] ([i915#52] / [i915#54])
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-glk6/igt@[email protected]
* igt@kms_flip@flip-vs-expired-vblank@c-hdmi-a1:
- shard-glk: [PASS][60] -> [FAIL][61] ([i915#79])
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-glk2/igt@kms_flip@[email protected]
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-glk8/igt@kms_flip@[email protected]
* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs:
- shard-apl: NOTRUN -> [SKIP][62] ([fdo#109271] / [i915#2672])
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl8/igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-32bpp-ytilegen12rcccs.html
* igt@kms_flip_scaled_crc@flip-32bpp-ytile-to-64bpp-ytile:
- shard-apl: NOTRUN -> [SKIP][63] ([fdo#109271] / [i915#2642]) +1 similar issue
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl1/igt@[email protected]
* igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-shrfb-plflip-blt:
- shard-iclb: [PASS][64] -> [FAIL][65] ([i915#49])
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-iclb1/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-shrfb-plflip-blt.html
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb3/igt@kms_frontbuffer_tracking@fbcpsr-1p-primscrn-shrfb-plflip-blt.html
* igt@kms_frontbuffer_tracking@fbcpsr-2p-primscrn-spr-indfb-onoff:
- shard-iclb: NOTRUN -> [SKIP][66] ([fdo#109280])
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb1/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][67] ([fdo#111825])
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-tglb6/igt@[email protected]
* igt@kms_hdmi_inject@inject-audio:
- shard-tglb: [PASS][68] -> [SKIP][69] ([i915#433])
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-tglb3/igt@[email protected]
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-tglb3/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-a-alpha-basic:
- shard-apl: NOTRUN -> [FAIL][70] ([fdo#108145] / [i915#265]) +2 similar issues
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl7/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-b-alpha-7efc:
- shard-kbl: NOTRUN -> [FAIL][71] ([fdo#108145] / [i915#265])
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl2/igt@[email protected]
* igt@kms_plane_alpha_blend@pipe-c-alpha-transparent-fb:
- shard-apl: NOTRUN -> [FAIL][72] ([i915#265])
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl2/igt@[email protected]
* igt@kms_psr2_sf@cursor-plane-update-sf:
- shard-iclb: NOTRUN -> [SKIP][73] ([i915#658])
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb5/igt@[email protected]
* igt@kms_psr2_sf@overlay-plane-update-sf-dmg-area-1:
- shard-kbl: NOTRUN -> [SKIP][74] ([fdo#109271] / [i915#658]) +2 similar issues
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl3/igt@[email protected]
* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-5:
- shard-apl: NOTRUN -> [SKIP][75] ([fdo#109271] / [i915#658]) +6 similar issues
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl1/igt@[email protected]
* igt@kms_psr2_su@page_flip:
- shard-glk: NOTRUN -> [SKIP][76] ([fdo#109271] / [i915#658]) +1 similar issue
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-glk7/igt@kms_psr2_su@page_flip.html
- shard-iclb: NOTRUN -> [SKIP][77] ([fdo#109642] / [fdo#111068] / [i915#658])
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb3/igt@kms_psr2_su@page_flip.html
* igt@kms_psr@psr2_primary_render:
- shard-iclb: NOTRUN -> [SKIP][78] ([fdo#109441])
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb7/igt@kms_psr@psr2_primary_render.html
* igt@kms_psr@psr2_sprite_mmap_gtt:
- shard-iclb: [PASS][79] -> [SKIP][80] ([fdo#109441]) +1 similar issue
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-iclb2/igt@kms_psr@psr2_sprite_mmap_gtt.html
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb1/igt@kms_psr@psr2_sprite_mmap_gtt.html
* igt@kms_sysfs_edid_timing:
- shard-apl: NOTRUN -> [FAIL][81] ([IGT#2])
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl6/igt@kms_sysfs_edid_timing.html
* igt@kms_writeback@writeback-check-output:
- shard-kbl: NOTRUN -> [SKIP][82] ([fdo#109271] / [i915#2437])
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl1/igt@[email protected]
* igt@kms_writeback@writeback-fb-id:
- shard-apl: NOTRUN -> [SKIP][83] ([fdo#109271] / [i915#2437])
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl8/igt@[email protected]
* igt@prime_udl:
- shard-iclb: NOTRUN -> [SKIP][84] ([fdo#109291])
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb5/igt@prime_udl.html
- shard-tglb: NOTRUN -> [SKIP][85] ([fdo#109291])
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-tglb6/igt@prime_udl.html
* igt@prime_vgem@fence-write-hang:
- shard-iclb: NOTRUN -> [SKIP][86] ([fdo#109295])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb8/igt@[email protected]
- shard-tglb: NOTRUN -> [SKIP][87] ([fdo#109295])
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-tglb7/igt@[email protected]
* igt@runner@aborted:
- shard-apl: NOTRUN -> ([FAIL][88], [FAIL][89]) ([i915#180] / [i915#3002])
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl1/igt@[email protected]
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl2/igt@[email protected]
* igt@sysfs_clients@recycle-many:
- shard-apl: NOTRUN -> [SKIP][90] ([fdo#109271] / [i915#2994]) +3 similar issues
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-apl6/igt@[email protected]
- shard-kbl: NOTRUN -> [SKIP][91] ([fdo#109271] / [i915#2994]) +1 similar issue
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl4/igt@[email protected]
#### Possible fixes ####
* igt@gem_exec_fair@basic-none-share@rcs0:
- shard-iclb: [FAIL][92] ([i915#2842]) -> [PASS][93]
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-iclb6/igt@gem_exec_fair@[email protected]
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb8/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-pace-share@rcs0:
- shard-tglb: [FAIL][94] ([i915#2842]) -> [PASS][95] +1 similar issue
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-tglb3/igt@gem_exec_fair@[email protected]
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-tglb5/igt@gem_exec_fair@[email protected]
* igt@gem_exec_fair@basic-pace@vecs0:
- shard-glk: [FAIL][96] ([i915#2842]) -> [PASS][97] +3 similar issues
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-glk5/igt@gem_exec_fair@[email protected]
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-glk8/igt@gem_exec_fair@[email protected]
* igt@gem_exec_whisper@basic-contexts-priority-all:
- shard-glk: [DMESG-WARN][98] ([i915#118] / [i915#95]) -> [PASS][99]
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-glk3/igt@[email protected]
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-glk9/igt@[email protected]
* igt@gem_mmap_gtt@cpuset-basic-small-copy-xy:
- shard-glk: [FAIL][100] ([i915#307]) -> [PASS][101]
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-glk8/igt@[email protected]
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-glk2/igt@[email protected]
* igt@gem_mmap_gtt@cpuset-big-copy-odd:
- shard-iclb: [FAIL][102] ([i915#2428]) -> [PASS][103]
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-iclb3/igt@[email protected]
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb4/igt@[email protected]
* igt@kms_draw_crc@draw-method-rgb565-mmap-wc-untiled:
- shard-glk: [FAIL][104] ([i915#52] / [i915#54]) -> [PASS][105] +5 similar issues
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-glk2/igt@[email protected]
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-glk7/igt@[email protected]
* igt@kms_flip@flip-vs-suspend-interruptible@a-dp1:
- shard-kbl: [DMESG-WARN][106] ([i915#180]) -> [PASS][107] +5 similar issues
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-kbl7/igt@kms_flip@[email protected]
[107]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl6/igt@kms_flip@[email protected]
* igt@kms_plane@plane-panning-bottom-right-suspend-pipe-b-planes:
- shard-snb: [DMESG-WARN][108] -> [PASS][109]
[108]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-snb2/igt@[email protected]
[109]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-snb5/igt@[email protected]
* igt@kms_psr@psr2_cursor_render:
- shard-iclb: [SKIP][110] ([fdo#109441]) -> [PASS][111]
[110]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-iclb3/igt@kms_psr@psr2_cursor_render.html
[111]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb2/igt@kms_psr@psr2_cursor_render.html
#### Warnings ####
* igt@kms_dp_dsc@basic-dsc-enable-edp:
- shard-iclb: [SKIP][112] ([fdo#109349]) -> [DMESG-WARN][113] ([i915#1226])
[112]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-iclb5/igt@[email protected]
[113]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb2/igt@[email protected]
* igt@kms_psr2_sf@plane-move-sf-dmg-area-2:
- shard-iclb: [SKIP][114] ([i915#658]) -> [SKIP][115] ([i915#2920])
[114]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-iclb5/igt@[email protected]
[115]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb2/igt@[email protected]
* igt@kms_psr2_sf@primary-plane-update-sf-dmg-area-3:
- shard-iclb: [SKIP][116] ([i915#2920]) -> [SKIP][117] ([i915#658]) +1 similar issue
[116]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-iclb2/igt@[email protected]
[117]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-iclb7/igt@[email protected]
* igt@runner@aborted:
- shard-kbl: ([FAIL][118], [FAIL][119], [FAIL][120], [FAIL][121], [FAIL][122], [FAIL][123]) ([i915#1436] / [i915#180] / [i915#1814] / [i915#2292] / [i915#3002]) -> ([FAIL][124], [FAIL][125], [FAIL][126], [FAIL][127], [FAIL][128]) ([i915#1436] / [i915#180] / [i915#1814] / [i915#3002])
[118]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-kbl4/igt@[email protected]
[119]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-kbl7/igt@[email protected]
[120]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-kbl4/igt@[email protected]
[121]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-kbl7/igt@[email protected]
[122]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-kbl7/igt@[email protected]
[123]: https://intel-gfx-ci.01.org/tree/drm-tip/IGT_6063/shard-kbl7/igt@[email protected]
[124]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl7/igt@[email protected]
[125]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl7/igt@[email protected]
[126]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl7/igt@[email protected]
[127]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl7/igt@[email protected]
[128]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/shard-kbl1/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[IGT#2]: https://gitlab.freedesktop.org/drm/igt-gpu-tools/issues/2
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109279]: https://bugs.freedesktop.org/show_bug.cgi?id=109279
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109291]: https://bugs.freedesktop.org/show_bug.cgi?id=109291
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#109349]: https://bugs.freedesktop.org/show_bug.cgi?id=109349
[fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
[fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
[fdo#110725]: https://bugs.freedesktop.org/show_bug.cgi?id=110725
[fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
[fdo#111614]: https://bugs.freedesktop.org/show_bug.cgi?id=111614
[fdo#111615]: https://bugs.freedesktop.org/show_bug.cgi?id=111615
[fdo#111825]: https://bugs.freedesktop.org/show_bug.cgi?id=111825
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1099]: https://gitlab.freedesktop.org/drm/intel/issues/1099
[i915#118]: https://gitlab.freedesktop.org/drm/intel/issues/118
[i915#1226]: https://gitlab.freedesktop.org/drm/intel/issues/1226
[i915#1319]: https://gitlab.freedesktop.org/drm/intel/issues/1319
[i915#1436]: https://gitlab.freedesktop.org/drm/intel/issues/1436
[i915#1699]: https://gitlab.freedesktop.org/drm/intel/issues/1699
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#1804]: https://gitlab.freedesktop.org/drm/intel/issues/1804
[i915#1814]: https://gitlab.freedesktop.org/drm/intel/issues/1814
[i915#1937]: https://gitlab.freedesktop.org/drm/intel/issues/1937
[i915#2105]: https://gitlab.freedesktop.org/drm/intel/issues/2105
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#2292]: https://gitlab.freedesktop.org/drm/intel/issues/2292
[i915#2389]: https://gitlab.freedesktop.org/drm/intel/issues/2389
[i915#2428]: https://gitlab.freedesktop.org/drm/intel/issues/2428
[i915#2437]: https://gitlab.freedesktop.org/drm/intel/issues/2437
[i915#2642]: https://gitlab.freedesktop.org/drm/intel/issues/2642
[i915#265]: https://gitlab.freedesktop.org/drm/intel/issues/265
[i915#2658]: https://gitlab.freedesktop.org/drm/intel/issues/2658
[i915#2672]: https://gitlab.freedesktop.org/drm/intel/issues/2672
[i915#2681]: https://gitlab.freedesktop.org/drm/intel/issues/2681
[i915#2684]: https://gitlab.freedesktop.org/drm/intel/issues/2684
[i915#2808]: https://gitlab.freedesktop.org/drm/intel/issues/2808
[i915#2842]: https://gitlab.freedesktop.org/drm/intel/issues/2842
[i915#2920]: https://gitlab.freedesktop.org/drm/intel/issues/2920
[i915#2994]: https://gitlab.freedesktop.org/drm/intel/issues/2994
[i915#3002]: https://gitlab.freedesktop.org/drm/intel/issues/3002
[i915#307]: https://gitlab.freedesktop.org/drm/intel/issues/307
[i915#3160]: https://gitlab.freedesktop.org/drm/intel/issues/3160
[i915#3297]: https://gitlab.freedesktop.org/drm/intel/issues/3297
[i915#3324]: https://gitlab.freedesktop.org/drm/intel/issues/3324
[i915#3354]: https://gitlab.freedesktop.org/drm/intel/issues/3354
[i915#3359]: https://gitlab.freedesktop.org/drm/intel/issues/3359
[i915#433]: https://gitlab.freedesktop.org/drm/intel/issues/433
[i915#454]: https://gitlab.freedesktop.org/drm/intel/issues/454
[i915#49]: https://gitlab.freedesktop.org/drm/intel/issues/49
[i915#52]: https://gitlab.freedesktop.org/drm/intel/issues/52
[i915#533]: https://gitlab.freedesktop.org/drm/intel/issues/533
[i915#54]: https://gitlab.freedesktop.org/drm/intel/issues/54
[i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
[i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
[i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95
Participating hosts (8 -> 8)
------------------------------
No changes in participating
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_5724/index.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 17 lines · Bhanuprakash Modem
When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.
This series will find a combination of modes that fit into the BW.
By parsing the PATH property, we can add a
link_group_idfield toigt_output_tto identify all connectors that shares the BW of the same link.Parsing the PATH property consists of finding all connectors with the same X prefix in the X-Y[-Z...] path property format and assigning a unique non-zero
link_group_idto all such connectors. Connectors without a PATH property are not an MST output, so theirlink_group_idcan be left at 0.
Quoted 6 lines
IGT core helper would override the mode on all connectors that will be modeset by the next
igt_display_commit()call in the test. These are all the connectors inigt_display_tthat have apending_pipeset by the test up to the point of calling this helper.Signed-off-by Bhanuprakash Modem <[email protected]>
Uh this is really not how kms is supposed to work. There are _tons_ of reasons why 2 crtc at the same time wont work, mst bw constraint is just one.
If you want to fix this, this should be fixed with atomic TEST_ONLY mode to figure out what works and what doesn't. Not by trying to re-implement the kernel's atomic_check configuration validation, because you just can't do that.
So nack on architectural reasons on this approach. -Daniel
Quoted 21 lines
Bhanuprakash Modem (5):
lib/igt_kms: Add a support to read PATH connector propertylib/igt_kms: Identify outputs that shares link bandwidthlib/igt_kms: helper to override the mode on all connectors tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests tests/kms_cursor_legacy: Fix mode selection for 2x testslib/igt_kms.c | 71 ++++++++++++++++++++++++++++++++ lib/igt_kms.h | 3 ++ tests/kms_cursor_legacy.c | 53 ++++++++++++++++++++++-- tests/kms_frontbuffer_tracking.c | 35 ++++++++++++++++ 4 files changed, 159 insertions(+), 3 deletions(-)--
2.20.1_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 30 lines
From: Daniel Vetter <[email protected]>
Sent: Saturday, April 10, 2021 1:48 AM
To: Modem, Bhanuprakash <[email protected]>
Cc: IGT development <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t 0/5] Fix mode selection for 2x testsQuoted 22 lines · Bhanuprakash Modem
When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.
This series will find a combination of modes that fit into the BW.
By parsing the PATH property, we can add a
link_group_idfield toigt_output_tto identify all connectors that shares the BW of the same link.Parsing the PATH property consists of finding all connectors with the same X prefix in the X-Y[-Z...] path property format and assigning a unique non-zero
link_group_idto all such connectors. Connectors without a PATH property are not an MST output, so theirlink_group_idcan be left at 0.IGT core helper would override the mode on all connectors that will be modeset by the next
igt_display_commit()call in the test. These are all the connectors inigt_display_tthat have apending_pipeset by the test up to the point of calling this helper.
Quoted 7 lines
Quoted 1 line
Signed-off-by Bhanuprakash Modem <[email protected]>Uh this is really not how kms is supposed to work. There are _tons_ of reasons why 2 crtc at the same time wont work, mst bw constraint is just one.
If you want to fix this, this should be fixed with atomic
TEST_ONLY
In fact, we are doing the same in this series.
By parsing the PATH connector prop, igt_output_refresh() will update the link_group_id field for each connector [1].
Each individual (Nx)-test will identify the connectors those are sharing the MST bw (by reading the link_group_id field in igt_output_t), and call the helper to find the suitable modes [2].
A helper function iterates through those N output/mode combinations. And find the combination using the most BW by ATOMIC_TEST_ONLY and returned to the test [3].
Am I missing anything?
[1]: https://patchwork.freedesktop.org/patch/427718
[2]: https://patchwork.freedesktop.org/patch/427720
[3]: https://patchwork.freedesktop.org/patch/427719
N : 2,3,4,...
-Bhanu
Quoted 31 lines
mode to figure out what works and what doesn't. Not by trying to re-implement the kernel's
atomic_checkconfiguration validation, because you just can't do that.So nack on architectural reasons on this approach. -Daniel
Quoted 14 lines
Bhanuprakash Modem (5):
lib/igt_kms: Add a support to read PATH connector propertylib/igt_kms: Identify outputs that shares link bandwidthlib/igt_kms: helper to override the mode on all connectors tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests tests/kms_cursor_legacy: Fix mode selection for 2x testslib/igt_kms.c | 71 ++++++++++++++++++++++++++++++++ lib/igt_kms.h | 3 ++ tests/kms_cursor_legacy.c | 53 ++++++++++++++++++++++-- tests/kms_frontbuffer_tracking.c | 35 ++++++++++++++++ 4 files changed, 159 insertions(+), 3 deletions(-)Quoted 7 lines
--
2.20.1_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 4 lines
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 46 lines · Bhanuprakash
Quoted 30 lines
From: Daniel Vetter <[email protected]>
Sent: Saturday, April 10, 2021 1:48 AM
To: Modem, Bhanuprakash <[email protected]>
Cc: IGT development <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t 0/5] Fix mode selection for 2x testsQuoted 22 lines · Bhanuprakash Modem
When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.
This series will find a combination of modes that fit into the BW.
By parsing the PATH property, we can add a
link_group_idfield toigt_output_tto identify all connectors that shares the BW of the same link.Parsing the PATH property consists of finding all connectors with the same X prefix in the X-Y[-Z...] path property format and assigning a unique non-zero
link_group_idto all such connectors. Connectors without a PATH property are not an MST output, so theirlink_group_idcan be left at 0.IGT core helper would override the mode on all connectors that will be modeset by the next
igt_display_commit()call in the test. These are all the connectors inigt_display_tthat have apending_pipeset by the test up to the point of calling this helper.Quoted 7 lines
Quoted 1 line
Signed-off-by Bhanuprakash Modem <[email protected]>Uh this is really not how kms is supposed to work. There are _tons_ of reasons why 2 crtc at the same time wont work, mst bw constraint is just one.
If you want to fix this, this should be fixed with atomic
TEST_ONLYIn fact, we are doing the same in this series.
By parsing the PATH connector prop,
igt_output_refresh()will update thelink_group_idfield for each connector [1].Each individual (Nx)-test will identify the connectors those are sharing the MST bw (by reading the
link_group_idfield inigt_output_t), and call the helper to find the suitable modes [2].
Quoted 5 lines
A helper function iterates through those N output/mode combinations. And find the combination using the most BW by
ATOMIC_TEST_ONLYand returned to the test [3].Am I missing anything?
Using TEST_ONLY sounds good. Trying to do clever filtering with PATH property before you call TEST_ONLY is not good. You should check with TEST_ONLY in general, not just when the path property indicates that the dp output is shared.
-Daniel
Quoted 42 lines
[1]: https://patchwork.freedesktop.org/patch/427718
[2]: https://patchwork.freedesktop.org/patch/427720
[3]: https://patchwork.freedesktop.org/patch/427719
N : 2,3,4,...-Bhanu
Quoted 35 lines
mode to figure out what works and what doesn't. Not by trying to re-implement the kernel's
atomic_checkconfiguration validation, because you just can't do that.So nack on architectural reasons on this approach. -Daniel
Quoted 14 lines
Bhanuprakash Modem (5):
lib/igt_kms: Add a support to read PATH connector propertylib/igt_kms: Identify outputs that shares link bandwidthlib/igt_kms: helper to override the mode on all connectors tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests tests/kms_cursor_legacy: Fix mode selection for 2x testslib/igt_kms.c | 71 ++++++++++++++++++++++++++++++++ lib/igt_kms.h | 3 ++ tests/kms_cursor_legacy.c | 53 ++++++++++++++++++++++-- tests/kms_frontbuffer_tracking.c | 35 ++++++++++++++++ 4 files changed, 159 insertions(+), 3 deletions(-)Quoted 7 lines
--
2.20.1_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 51 lines · Daniel Vetter
Quoted 50 lines · Bhanuprakash
Quoted 30 lines
From: Daniel Vetter <[email protected]>
Sent: Saturday, April 10, 2021 1:48 AM
To: Modem, Bhanuprakash <[email protected]>
Cc: IGT development <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t 0/5] Fix mode selection for 2x testsQuoted 22 lines · Bhanuprakash Modem
When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.
This series will find a combination of modes that fit into the BW.
By parsing the PATH property, we can add a
link_group_idfield toigt_output_tto identify all connectors that shares the BW of the same link.Parsing the PATH property consists of finding all connectors with the same X prefix in the X-Y[-Z...] path property format and assigning a unique non-zero
link_group_idto all such connectors. Connectors without a PATH property are not an MST output, so theirlink_group_idcan be left at 0.IGT core helper would override the mode on all connectors that will be modeset by the next
igt_display_commit()call in the test. These are all the connectors inigt_display_tthat have apending_pipeset by the test up to the point of calling this helper.Quoted 7 lines
Quoted 1 line
Signed-off-by Bhanuprakash Modem <[email protected]>Uh this is really not how kms is supposed to work. There are _tons_ of reasons why 2 crtc at the same time wont work, mst bw constraint is just one.
If you want to fix this, this should be fixed with atomic
TEST_ONLYIn fact, we are doing the same in this series.
By parsing the PATH connector prop,
igt_output_refresh()will update thelink_group_idfield for each connector [1].Each individual (Nx)-test will identify the connectors those are sharing the MST bw (by reading the
link_group_idfield inigt_output_t), and call the helper to find the suitable modes [2].A helper function iterates through those N output/mode combinations. And find the combination using the most BW by
ATOMIC_TEST_ONLYand returned to the test [3].
Quoted 6 lines
Quoted 1 line
Am I missing anything?
Using
TEST_ONLYsounds good. Trying to do clever filtering with PATH property before you callTEST_ONLYis not good. You should check withTEST_ONLYin general, not just when the path property indicates that the dp output is shared.
I think it would still make sense to find the working config first on outputs sharing a link bandwidth with TEST_ONLY and only then find the config with all required outputs included in the TEST_ONLY commit, starting with the modes found for outpus sharing a link. This is the way you could find the maximum resolution that can be used on each output.
Quoted 40 lines
-Daniel
Quoted 38 lines
[1]: https://patchwork.freedesktop.org/patch/427718
[2]: https://patchwork.freedesktop.org/patch/427720
[3]: https://patchwork.freedesktop.org/patch/427719
N : 2,3,4,...-Bhanu
Quoted 31 lines
mode to figure out what works and what doesn't. Not by trying to re-implement the kernel's
atomic_checkconfiguration validation, because you just can't do that.So nack on architectural reasons on this approach. -Daniel
Quoted 21 lines
Bhanuprakash Modem (5):
lib/igt_kms: Add a support to read PATH connector propertylib/igt_kms: Identify outputs that shares link bandwidthlib/igt_kms: helper to override the mode on all connectors tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests tests/kms_cursor_legacy: Fix mode selection for 2x testslib/igt_kms.c | 71 ++++++++++++++++++++++++++++++++ lib/igt_kms.h | 3 ++ tests/kms_cursor_legacy.c | 53 ++++++++++++++++++++++-- tests/kms_frontbuffer_tracking.c | 35 ++++++++++++++++ 4 files changed, 159 insertions(+), 3 deletions(-)--
2.20.1_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 9 lines
Quoted 4 lines
Quoted 4 lines
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.chSignature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 59 lines · Imre Deak
Quoted 51 lines · Daniel Vetter
Quoted 50 lines · Bhanuprakash
Quoted 30 lines
From: Daniel Vetter <[email protected]>
Sent: Saturday, April 10, 2021 1:48 AM
To: Modem, Bhanuprakash <[email protected]>
Cc: IGT development <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t 0/5] Fix mode selection for 2x testsQuoted 22 lines · Bhanuprakash Modem
When two monitors connected through MST, the second monitor also tries to use the same mode. So two such modes may not fit into the link bandwidth.
This series will find a combination of modes that fit into the BW.
By parsing the PATH property, we can add a
link_group_idfield toigt_output_tto identify all connectors that shares the BW of the same link.Parsing the PATH property consists of finding all connectors with the same X prefix in the X-Y[-Z...] path property format and assigning a unique non-zero
link_group_idto all such connectors. Connectors without a PATH property are not an MST output, so theirlink_group_idcan be left at 0.IGT core helper would override the mode on all connectors that will be modeset by the next
igt_display_commit()call in the test. These are all the connectors inigt_display_tthat have apending_pipeset by the test up to the point of calling this helper.Quoted 7 lines
Quoted 1 line
Signed-off-by Bhanuprakash Modem <[email protected]>Uh this is really not how kms is supposed to work. There are _tons_ of reasons why 2 crtc at the same time wont work, mst bw constraint is just one.
If you want to fix this, this should be fixed with atomic
TEST_ONLYIn fact, we are doing the same in this series.
By parsing the PATH connector prop,
igt_output_refresh()will update thelink_group_idfield for each connector [1].Each individual (Nx)-test will identify the connectors those are sharing the MST bw (by reading the
link_group_idfield inigt_output_t), and call the helper to find the suitable modes [2].A helper function iterates through those N output/mode combinations. And find the combination using the most BW by
ATOMIC_TEST_ONLYand returned to the test [3].Quoted 6 lines
Quoted 1 line
Am I missing anything?
Using
TEST_ONLYsounds good. Trying to do clever filtering with PATH property before you callTEST_ONLYis not good. You should check withTEST_ONLYin general, not just when the path property indicates that the dp output is shared.
Quoted 5 lines
I think it would still make sense to find the working config first on outputs sharing a link bandwidth with
TEST_ONLYand only then find the config with all required outputs included in theTEST_ONLYcommit, starting with the modes found for outpus sharing a link. This is the way you could find the maximum resolution that can be used on each output.
That sounds like a testcase to make sure we support at least 2 working modes on the same MST link. I'm not sure that really should be the generic solution thing, for that you just have to go around reducing resolutions until you've managed to light up enough outputs. So order doesn't matter really, aside from maybe a preference for same resolutions (due to clock sharing and even splits of fifos and that kind of stuff).
Treating MST links specially just to light up a set of outputs still feels a bit wrong.
-Daniel
Quoted 50 lines
Quoted 50 lines
-Daniel
Quoted 42 lines
[1]: https://patchwork.freedesktop.org/patch/427718
[2]: https://patchwork.freedesktop.org/patch/427720
[3]: https://patchwork.freedesktop.org/patch/427719
N : 2,3,4,...-Bhanu
Quoted 35 lines
mode to figure out what works and what doesn't. Not by trying to re-implement the kernel's
atomic_checkconfiguration validation, because you just can't do that.So nack on architectural reasons on this approach. -Daniel
Quoted 14 lines
Bhanuprakash Modem (5):
lib/igt_kms: Add a support to read PATH connector propertylib/igt_kms: Identify outputs that shares link bandwidthlib/igt_kms: helper to override the mode on all connectors tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests tests/kms_cursor_legacy: Fix mode selection for 2x testslib/igt_kms.c | 71 ++++++++++++++++++++++++++++++++ lib/igt_kms.h | 3 ++ tests/kms_cursor_legacy.c | 53 ++++++++++++++++++++++-- tests/kms_frontbuffer_tracking.c | 35 ++++++++++++++++ 4 files changed, 159 insertions(+), 3 deletions(-)Quoted 7 lines
--
2.20.1_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.chSignature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 39 lines · Daniel Vetter
Quoted 26 lines
Quoted 19 lines
Quoted 19 lines
Quoted 6 lines
[...]
Uh this is really not how kms is supposed to work. There are _tons_ of reasons why 2 crtc at the same time wont work, mst bw constraint is just one.If you want to fix this, this should be fixed with atomic
TEST_ONLYIn fact, we are doing the same in this series.
By parsing the PATH connector prop,
igt_output_refresh()will update thelink_group_idfield for each connector [1].Each individual (Nx)-test will identify the connectors those are sharing the MST bw (by reading the
link_group_idfield inigt_output_t), and call the helper to find the suitable modes [2].A helper function iterates through those N output/mode combinations. And find the combination using the most BW by
ATOMIC_TEST_ONLYand returned to the test [3].Quoted 6 lines
Quoted 1 line
Am I missing anything?
Using
TEST_ONLYsounds good. Trying to do clever filtering with PATH property before you callTEST_ONLYis not good. You should check withTEST_ONLYin general, not just when the path property indicates that the dp output is shared.Quoted 5 lines
I think it would still make sense to find the working config first on outputs sharing a link bandwidth with
TEST_ONLYand only then find the config with all required outputs included in theTEST_ONLYcommit, starting with the modes found for outpus sharing a link. This is the way you could find the maximum resolution that can be used on each output.That sounds like a testcase to make sure we support at least 2 working modes on the same MST link. I'm not sure that really should be the generic solution thing, for that you just have to go around reducing resolutions until you've managed to light up enough outputs. So order doesn't matter really, aside from maybe a preference for same resolutions (due to clock sharing and even splits of fifos and that kind of stuff).
Quoted 2 lines
Treating MST links specially just to light up a set of outputs still feels a bit wrong.
Imo we should test the most usual user scenario, which I assumed is the max resolution on all connected displays. But this could be wrong and any more complicated logic could be added as a follow up if needed. So I'm also ok to ignore the link bandwidth sharing aspect.
Quoted 48 lines
-Daniel
Quoted 46 lines
Quoted 46 lines
-Daniel
Quoted 42 lines
[1]: https://patchwork.freedesktop.org/patch/427718
[2]: https://patchwork.freedesktop.org/patch/427720
[3]: https://patchwork.freedesktop.org/patch/427719
N : 2,3,4,...-Bhanu
Quoted 35 lines
mode to figure out what works and what doesn't. Not by trying to re-implement the kernel's
atomic_checkconfiguration validation, because you just can't do that.So nack on architectural reasons on this approach. -Daniel
Quoted 14 lines
Bhanuprakash Modem (5):
lib/igt_kms: Add a support to read PATH connector propertylib/igt_kms: Identify outputs that shares link bandwidthlib/igt_kms: helper to override the mode on all connectors tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests tests/kms_cursor_legacy: Fix mode selection for 2x testslib/igt_kms.c | 71 ++++++++++++++++++++++++++++++++ lib/igt_kms.h | 3 ++ tests/kms_cursor_legacy.c | 53 ++++++++++++++++++++++-- tests/kms_frontbuffer_tracking.c | 35 ++++++++++++++++ 4 files changed, 159 insertions(+), 3 deletions(-)Quoted 7 lines
--
2.20.1_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
Quoted 9 lines
Quoted 4 lines
Quoted 4 lines
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.chSignature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 37 lines · Imre Deak
Quoted 36 lines · Daniel Vetter
Quoted 24 lines
Quoted 19 lines
Quoted 19 lines
Quoted 6 lines
[...]
Uh this is really not how kms is supposed to work. There are _tons_ of reasons why 2 crtc at the same time wont work, mst bw constraint is just one.If you want to fix this, this should be fixed with atomic
TEST_ONLYIn fact, we are doing the same in this series.
By parsing the PATH connector prop,
igt_output_refresh()will update thelink_group_idfield for each connector [1].Each individual (Nx)-test will identify the connectors those are sharing the MST bw (by reading the
link_group_idfield inigt_output_t), and call the helper to find the suitable modes [2].A helper function iterates through those N output/mode combinations. And find the combination using the most BW by
ATOMIC_TEST_ONLYand returned to the test [3].Quoted 5 lines
Quoted 1 line
Am I missing anything?
Using
TEST_ONLYsounds good. Trying to do clever filtering with PATH property before you callTEST_ONLYis not good. You should check withTEST_ONLYin general, not just when the path property indicates that the dp output is shared.Quoted 5 lines
I think it would still make sense to find the working config first on outputs sharing a link bandwidth with
TEST_ONLYand only then find the config with all required outputs included in theTEST_ONLYcommit, starting with the modes found for outpus sharing a link. This is the way you could find the maximum resolution that can be used on each output.That sounds like a testcase to make sure we support at least 2 working modes on the same MST link. I'm not sure that really should be the generic solution thing, for that you just have to go around reducing resolutions until you've managed to light up enough outputs. So order doesn't matter really, aside from maybe a preference for same resolutions (due to clock sharing and even splits of fifos and that kind of stuff).
Quoted 6 lines
Quoted 2 lines
Treating MST links specially just to light up a set of outputs still feels a bit wrong.
Imo we should test the most usual user scenario, which I assumed is the max resolution on all connected displays. But this could be wrong and any more complicated logic could be added as a follow up if needed. So I'm also ok to ignore the link bandwidth sharing aspect.
Makes sense to not have a specific use case for MST in multi display tests.
I do like the idea for helper functions in the patches 1-3 to identify connectors sharing mst link.
In kms_content_protection we have mst specific test and the helper functions can be useful there.
Perhaps can be re-introduced along with a new IGT specifically for testing MST config in a separate patch series.
Regards,
Ankit
Quoted 44 lines
Quoted 44 lines
-Daniel
Quoted 41 lines
Quoted 41 lines
-Daniel
Quoted 39 lines
[1]: https://patchwork.freedesktop.org/patch/427718
[2]: https://patchwork.freedesktop.org/patch/427720
[3]: https://patchwork.freedesktop.org/patch/427719
N : 2,3,4,...-Bhanu
Quoted 33 lines
mode to figure out what works and what doesn't. Not by trying to re-implement the kernel's
atomic_checkconfiguration validation, because you just can't do that.So nack on architectural reasons on this approach. -Daniel
Quoted 13 lines
Bhanuprakash Modem (5):
lib/igt_kms: Add a support to read PATH connector propertylib/igt_kms: Identify outputs that shares link bandwidthlib/igt_kms: helper to override the mode on all connectors tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests tests/kms_cursor_legacy: Fix mode selection for 2x testslib/igt_kms.c | 71 ++++++++++++++++++++++++++++++++ lib/igt_kms.h | 3 ++ tests/kms_cursor_legacy.c | 53 ++++++++++++++++++++++-- tests/kms_frontbuffer_tracking.c | 35 ++++++++++++++++ 4 files changed, 159 insertions(+), 3 deletions(-)Quoted 7 lines
--
2.20.1_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
Quoted 8 lines
Quoted 8 lines
Quoted 4 lines
Quoted 4 lines
Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.chSignature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 54 lines
From: Imre Deak <[email protected]>
Sent: Thursday, April 15, 2021 12:31 AM
To: Daniel Vetter <[email protected]>
Cc: Modem, Bhanuprakash <[email protected]>; Daniel Vetter <[email protected]>; Nautiyal, Ankit K <[email protected]>; IGT development <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t 0/5] Fix mode selection for 2x testsQuoted 2 lines · Daniel Vetter
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[...]
Uh this is really not how kms is supposed to work. There are _tons_of
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
reasons why 2 crtc at the same time wont work, mst bw constraint is just one.
If you want to fix this, this should be fixed with atomic
TEST_ONLYIn fact, we are doing the same in this series.
By parsing the PATH connector prop,
igt_output_refresh()will updatethe
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
link_group_idfield for each connector [1].Each individual (Nx)-test will identify the connectors those are
sharing
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
the MST bw (by reading the
link_group_idfield inigt_output_t), andcall
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
the helper to find the suitable modes [2].
A helper function iterates through those N output/mode combinations.
And
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
find the combination using the most BW by
ATOMIC_TEST_ONLYandreturned
Quoted 22 lines
Quoted 9 lines
Quoted 8 lines
Quoted 3 lines
to the test [3].
Am I missing anything?
Using
TEST_ONLYsounds good. Trying to do clever filtering with PATH property before you callTEST_ONLYis not good. You should check withTEST_ONLYin general, not just when the path property indicates that the dp output is shared.Quoted 5 lines
I think it would still make sense to find the working config first on outputs sharing a link bandwidth with
TEST_ONLYand only then find the config with all required outputs included in theTEST_ONLYcommit, starting with the modes found for outpus sharing a link. This is the way you could find the maximum resolution that can be used on each output.That sounds like a testcase to make sure we support at least 2 working modes on the same MST link. I'm not sure that really should be the generic solution thing, for that you just have to go around reducing resolutions until you've managed to light up enough outputs. So order doesn't matter really, aside from maybe a preference for same resolutions (due to clock sharing and even splits of fifos and that kind of stuff).
Quoted 7 lines
Quoted 2 lines
Treating MST links specially just to light up a set of outputs still feels a bit wrong.
Imo we should test the most usual user scenario, which I assumed is the max resolution on all connected displays. But this could be wrong and any more complicated logic could be added as a follow up if needed. So I'm also ok to ignore the link bandwidth sharing aspect.
In simple words, just remove the MST specific stuff (link_group_id, PATH, etc...) from this series, and each individual (Nx)-test should call the helper[1] to get output/mode combo. Is my understanding correct?
[1] https://patchwork.freedesktop.org/patch/427719
Quoted 28 lines
Quoted 28 lines
-Daniel
Quoted 25 lines
Quoted 25 lines
-Daniel
Quoted 22 lines
[1]: https://patchwork.freedesktop.org/patch/427718
[2]: https://patchwork.freedesktop.org/patch/427720
[3]: https://patchwork.freedesktop.org/patch/427719
N : 2,3,4,...-Bhanu
Quoted 15 lines
mode to figure out what works and what doesn't. Not by trying to re-implement the kernel's
atomic_checkconfiguration validation, because you just can't do that.So nack on architectural reasons on this approach. -Daniel
Quoted 8 lines
Bhanuprakash Modem (5):
lib/igt_kms: Add a support to read PATH connector propertylib/igt_kms: Identify outputs that shares link bandwidthlib/igt_kms: helper to override the mode on all connectors tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests tests/kms_cursor_legacy: Fix mode selection for 2x tests
Quoted 31 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
lib/igt_kms.c | 71++++++++++++++++++++++++++++++++
Quoted 29 lines
Quoted 20 lines
Quoted 20 lines
Quoted 19 lines
Quoted 19 lines
Quoted 5 lines
lib/igt_kms.h | 3 ++ tests/kms_cursor_legacy.c | 53 ++++++++++++++++++++++-- tests/kms_frontbuffer_tracking.c | 35 ++++++++++++++++ 4 files changed, 159 insertions(+), 3 deletions(-)Quoted 7 lines
--
2.20.1_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.chQuoted 4 lines
Quoted 4 lines
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 57 lines · Bhanuprakash
Quoted 57 lines
From: Imre Deak <[email protected]>
Sent: Thursday, April 15, 2021 12:31 AM
To: Daniel Vetter <[email protected]>
Cc: Modem, Bhanuprakash <[email protected]>; Daniel Vetter <[email protected]>; Nautiyal, Ankit K <[email protected]>; IGT development <[email protected]>
Subject: Re: [igt-dev] [PATCH i-g-t 0/5] Fix mode selection for 2x testsQuoted 2 lines · Daniel Vetter
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
Quoted 2 lines
[...]
Uh this is really not how kms is supposed to work. There are _tons_of
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 4 lines
reasons why 2 crtc at the same time wont work, mst bw constraint is just one.
If you want to fix this, this should be fixed with atomic
TEST_ONLYIn fact, we are doing the same in this series.
By parsing the PATH connector prop,
igt_output_refresh()will updatethe
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
link_group_idfield for each connector [1].Each individual (Nx)-test will identify the connectors those are
sharing
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
the MST bw (by reading the
link_group_idfield inigt_output_t), andcall
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
the helper to find the suitable modes [2].
A helper function iterates through those N output/mode combinations.
And
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
find the combination using the most BW by
ATOMIC_TEST_ONLYandreturned
Quoted 24 lines
Quoted 9 lines
Quoted 8 lines
Quoted 3 lines
to the test [3].
Am I missing anything?
Using
TEST_ONLYsounds good. Trying to do clever filtering with PATH property before you callTEST_ONLYis not good. You should check withTEST_ONLYin general, not just when the path property indicates that the dp output is shared.Quoted 5 lines
I think it would still make sense to find the working config first on outputs sharing a link bandwidth with
TEST_ONLYand only then find the config with all required outputs included in theTEST_ONLYcommit, starting with the modes found for outpus sharing a link. This is the way you could find the maximum resolution that can be used on each output.That sounds like a testcase to make sure we support at least 2 working modes on the same MST link. I'm not sure that really should be the generic solution thing, for that you just have to go around reducing resolutions until you've managed to light up enough outputs. So order doesn't matter really, aside from maybe a preference for same resolutions (due to clock sharing and even splits of fifos and that kind of stuff).
Treating MST links specially just to light up a set of outputs still feels a bit wrong.
Quoted 8 lines
Quoted 4 lines
Imo we should test the most usual user scenario, which I assumed is the max resolution on all connected displays. But this could be wrong and any more complicated logic could be added as a follow up if needed. So I'm also ok to ignore the link bandwidth sharing aspect.
In simple words, just remove the MST specific stuff (
link_group_id, PATH, etc...) from this series, and each individual (Nx)-test should call the helper[1] to get output/mode combo. Is my understanding correct?
Yup. We can then also add fancier fallback logic that tries to emulated what compositors generally try to pick in there.
-Daniel
Quoted 62 lines
[1] https://patchwork.freedesktop.org/patch/427719
Quoted 59 lines
Quoted 29 lines
-Daniel
Quoted 26 lines
Quoted 26 lines
-Daniel
Quoted 23 lines
[1]: https://patchwork.freedesktop.org/patch/427718
[2]: https://patchwork.freedesktop.org/patch/427720
[3]: https://patchwork.freedesktop.org/patch/427719
N : 2,3,4,...-Bhanu
Quoted 16 lines
mode to figure out what works and what doesn't. Not by trying to re-implement the kernel's
atomic_checkconfiguration validation, because you just can't do that.So nack on architectural reasons on this approach. -Daniel
Quoted 9 lines
Bhanuprakash Modem (5):
lib/igt_kms: Add a support to read PATH connector propertylib/igt_kms: Identify outputs that shares link bandwidthlib/igt_kms: helper to override the mode on all connectors tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests tests/kms_cursor_legacy: Fix mode selection for 2x testslib/igt_kms.c | 71++++++++++++++++++++++++++++++++
Quoted 29 lines
Quoted 20 lines
Quoted 20 lines
Quoted 19 lines
Quoted 19 lines
Quoted 5 lines
lib/igt_kms.h | 3 ++ tests/kms_cursor_legacy.c | 53 ++++++++++++++++++++++-- tests/kms_frontbuffer_tracking.c | 35 ++++++++++++++++ 4 files changed, 159 insertions(+), 3 deletions(-)Quoted 7 lines
--
2.20.1_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.chQuoted 4 lines
Quoted 4 lines
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev