Control-flow Enforcement: Indirect Branch Tracking
Subsystems (8)
v28 cover Control-flow Enforcement: Indirect Branch Tracking
Control-flow Enforcement (CET) is a new Intel processor feature that blocks return/jump-oriented programming attacks. Details are in "Intel 64 and IA-32 Architectures Software Developer's Manual" [1].
This is the second part of CET and enables Indirect Branch Tracking (IBT). It is built on top of the shadow stack series.
Changes in v28:
- Patch #10: Update change log and comments.
Changes in v27:
- Use a ucontext flag to save/restore IBT status.
- Disable IBT support for IA32.
- Rebase to Linus tree v5.13-rc2.
[1] Intel 64 and IA-32 Architectures Software Developer's Manual:
https://software.intel.com/en-us/download/intel-64-and-ia-32- architectures-sdm-combined-volumes-1-2a-2b-2c-2d-3a-3b-3c-3d-and-4
[2] Indirect Branch Tracking patches v27:
https://lore.kernel.org/r/[email protected]/
H.J. Lu (3):
x86/cet/ibt: Update arch_prctl functions for Indirect Branch Tracking x86/vdso: Insert endbr32/endbr64 to vDSO
x86/vdso/32: Add ENDBR to __kernel_vsyscall entry point
Yu-cheng Yu (7):
x86/cet/ibt: Add Kconfig option for Indirect Branch Tracking x86/cet/ibt: Add user-mode Indirect Branch Tracking support x86/cet/ibt: Handle signals for Indirect Branch Tracking x86/cet/ibt: Disable IBT for ia32
x86/cet/ibt: Update ELF header parsing for Indirect Branch Tracking x86/vdso: Introduce ENDBR macro
x86/vdso: Add ENDBR to __vdso_sgx_enter_enclave
arch/x86/Kconfig | 19 +++++ arch/x86/entry/vdso/Makefile | 4 + arch/x86/entry/vdso/vdso32/system_call.S | 2 + arch/x86/entry/vdso/vsgx.S | 4 + arch/x86/ia32/ia32_signal.c | 22 +++++- arch/x86/include/asm/cet.h | 13 ++++ arch/x86/include/asm/disabled-features.h | 8 +- arch/x86/include/asm/elf.h | 13 +++- arch/x86/include/asm/vdso.h | 20 ++++- arch/x86/include/uapi/asm/ucontext.h | 5 ++ arch/x86/kernel/Makefile | 1 + arch/x86/kernel/cet_prctl.c | 5 ++ arch/x86/kernel/ibt.c | 99 ++++++++++++++++++++++++ arch/x86/kernel/process_64.c | 6 ++ arch/x86/kernel/signal.c | 6 ++ 15 files changed, 221 insertions(+), 6 deletions(-) create mode 100644 arch/x86/kernel/ibt.c
Signature · 1 line
2.21.0
PATCH v28 1/10 x86/cet/ibt: Add Kconfig option for Indirect Branch Tracking
Indirect Branch Tracking (IBT) provides protection against CALL-/JMP- oriented programming attacks. It is active when the kernel has this feature enabled, and the processor and the application support it. When this feature is enabled, legacy non-IBT applications continue to work, but without IBT protection.
--- arch/x86/Kconfig | 19 +++++++++++++++++++ arch/x86/include/asm/disabled-features.h | 8 +++++++- 2 files changed, 26 insertions(+), 1 deletion(-)
arch/x86/Kconfig +19 -0
@@ -1933,6 +1933,25 @@ config X86_SHADOW_STACK If unsure, say N. +config X86_IBT + prompt "Intel Indirect Branch Tracking" + def_bool n + depends on X86_SHADOW_STACK + depends on $(cc-option,-fcf-protection) + help + Indirect Branch Tracking (IBT) provides protection against + CALL-/JMP-oriented programming attacks. It is active when + the kernel has this feature enabled, and the processor and + the application support it. When this feature is enabled, + legacy non-IBT applications continue to work, but without + IBT protection. + Support for this feature is present on Tiger Lake family of + processors released in 2020 or later. Enabling this feature + increases kernel text size by 3.7 KB. + See Documentation/x86/intel_cet.rst for more information. + + If unsure, say N. + config EFI bool "EFI runtime service support" depends on ACPI
arch/x86/include/asm/disabled-features.h +7 -1
@@ -71,6 +71,12 @@#define DISABLE_SHSTK (1 << (X86_FEATURE_SHSTK & 31))#endif +#ifdef CONFIG_X86_IBT +#define DISABLE_IBT 0 +#else +#define DISABLE_IBT (1 << (X86_FEATURE_IBT & 31)) +#endif +/* * Make sure to add features to the correct mask */
@@ -93,7 +99,7 @@#define DISABLED_MASK16 (DISABLE_PKU|DISABLE_OSPKE|DISABLE_LA57|DISABLE_UMIP| \ DISABLE_ENQCMD|DISABLE_SHSTK)#define DISABLED_MASK17 0 -#define DISABLED_MASK18 0 +#define DISABLED_MASK18 (DISABLE_IBT)#define DISABLED_MASK19 0#define DISABLED_MASK_CHECK BUILD_BUG_ON_ZERO(NCAPINTS != 20)
Signature · 1 line
2.21.0
PATCH v28 2/10 x86/cet/ibt: Add user-mode Indirect Branch Tracking support
In reply to Yu-cheng YuIntroduce user-mode Indirect Branch Tracking (IBT) support. Add routines for the setup/disable of IBT.
---
v28:
- When IBT feature is not present, make ibt_setup() return success, since this is a setup function, and if IBT feature is not present there is no need for setup.
v27:
- Change struct thread_shstk: ibt_enabled to ibt.
- Create a helper for set/clear bits of MSR_IA32_U_CET.
arch/x86/include/asm/cet.h | 9 ++++++ arch/x86/kernel/Makefile | 1 + arch/x86/kernel/ibt.c | 58 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 68 insertions(+) create mode 100644 arch/x86/kernel/ibt.c
arch/x86/include/asm/cet.h +9 -0
@@ -14,6 +14,7 @@ struct thread_shstk {u64 base;u64 size; u64 locked:1; + u64 ibt:1; };#ifdef CONFIG_X86_SHADOW_STACK
@@ -42,6 +43,14 @@ static inline int setup_signal_shadow_stack(int ia32, void __user *restorer) { rstatic inline int restore_signal_shadow_stack (void ) {return 0 ; }#endif +#ifdef CONFIG_X86_IBT +int ibt_setup (void ); +void ibt_disable (void ); +#else +static inline int ibt_setup (void ) {return 0 ; } +static inline void ibt_disable (void ) {} +#endif +#ifdef CONFIG_X86_SHADOW_STACK int prctl_cet (int option,u64 arg2);#else
arch/x86/kernel/Makefile +1 -0
@@ -152,6 +152,7 @@ obj-$(CONFIG_UNWINDER_GUESS) += unwind_guess.o obj-$(CONFIG_AMD_MEM_ENCRYPT) += sev.o obj-$(CONFIG_X86_SHADOW_STACK) += shstk.o obj-$(CONFIG_X86_SHADOW_STACK) += shstk.o cet_prctl.o +obj-$(CONFIG_X86_IBT) += ibt.o ### # 64 bit specific files ifeq ($(CONFIG_X86_64),y)
arch/x86/kernel/ibt.c new file +58 -0
58 lines not on this page · raw message
Signature · 1 line
2.21.0
PATCH v28 3/10 x86/cet/ibt: Handle signals for Indirect Branch Tracking
In reply to Yu-cheng YuIBT state machine tracks CALL/JMP instructions. When a such instruction is executed and before arriving at an ENDBR, it is in WAIT_FOR_ENDBR state, which can be read from CET_WAIT_ENDBR bit of MSR_IA32_U_CET.
Further details are described in Intel SDM Vol. 1, Sec. 18.3.
In handling signals, WAIT_FOR_ENDBR state is saved/restored with a new UC_WAIT_ENDBR flag being introduced.
A legacy IA32 signal frame does not have ucontext, and cannot be supported with a uc flag. Thus, IBT feature is not supported for ia32 app's, which is handled in a separate patch.
--- arch/x86/ia32/ia32_signal.c | 15 ++++++++-- arch/x86/include/asm/cet.h | 4 +++ arch/x86/include/uapi/asm/ucontext.h | 5 ++++ arch/x86/kernel/ibt.c | 41 ++++++++++++++++++++++++++++ arch/x86/kernel/signal.c | 6 ++++ 5 files changed, 68 insertions(+), 3 deletions(-)
arch/x86/ia32/ia32_signal.c +12 -3
@@ -129,6 +129,7 @@ COMPAT_SYSCALL_DEFINE0(rt_sigreturn) {struct pt_regs *regs =current_pt_regs ();struct rt_sigframe_ia32 __user *frame; +unsigned int uc_flags;sigset_t set; frame = (struct rt_sigframe_ia32 __user *)(regs->sp -4 );
@@ -137,6 +138,11 @@ COMPAT_SYSCALL_DEFINE0(rt_sigreturn) goto badframe;if (__get_user (set.sig[0 ], (__u64 __user *)&frame->uc.uc_sigmask)) goto badframe; +if (__get_user (uc_flags, &frame->uc.uc_flags)) + goto badframe; + +if (uc_flags &UC_WAIT_ENDBR ) +ibt_set_wait_endbr ();set_current_blocked (&set);
@@ -312,6 +318,7 @@ int ia32_setup_rt_frame(int sig, struct ksignal *ksig, compat_sigset_t *set, struct pt_regs *regs) { struct rt_sigframe_ia32 __user *frame; +unsigned int uc_flags =0 ;void __user *restorer;void __user *fp =NULL ;
@@ -339,6 +346,9 @@ int ia32_setup_rt_frame(int sig, struct ksignal *ksig,if (setup_signal_shadow_stack (1 , restorer))return -EFAULT ; +if (ibt_get_clear_wait_endbr ()) + uc_flags |=UC_WAIT_ENDBR ; +if (!user_access_begin (frame,sizeof (*frame)))return -EFAULT ;
@@ -348,9 +358,8 @@ int ia32_setup_rt_frame(int sig, struct ksignal *ksig,/* Create the ucontext. */ if (static_cpu_has (X86_FEATURE_XSAVE )) -unsafe_put_user (UC_FP_XSTATE , &frame->uc.uc_flags, Efault); -else -unsafe_put_user (0 , &frame->uc.uc_flags, Efault); + uc_flags |=UC_FP_XSTATE ; +unsafe_put_user (uc_flags, &frame->uc.uc_flags, Efault);unsafe_put_user (0 , &frame->uc.uc_link, Efault);unsafe_compat_save_altstack (&frame->uc.uc_stack, regs->sp, Efault);
arch/x86/include/asm/cet.h +4 -0
@@ -46,9 +46,13 @@ static inline int restore_signal_shadow_stack(void) { return 0; }#ifdef CONFIG_X86_IBT int ibt_setup (void );void ibt_disable (void ); +int ibt_get_clear_wait_endbr (void ); +int ibt_set_wait_endbr (void );#else static inline int ibt_setup (void ) {return 0 ; }static inline void ibt_disable (void ) {} +static inline int ibt_get_clear_wait_endbr (void ) {return 0 ; } +static inline int ibt_set_wait_endbr (void ) {return 0 ; }#endif #ifdef CONFIG_X86_SHADOW_STACK
arch/x86/include/uapi/asm/ucontext.h +5 -0
@@ -51,6 +51,11 @@#define UC_STRICT_RESTORE_SS 0x4#endif +/* +* Indicates IBT WAIT-ENDBR status. +*/ +#define UC_WAIT_ENDBR 0x08 +#include <asm-generic/ucontext.h> #endif /* _ASM_X86_UCONTEXT_H */
arch/x86/kernel/ibt.c +41 -0
44 lines not on this page · raw message
arch/x86/kernel/signal.c +6 -0
@@ -135,6 +135,9 @@ static int restore_sigcontext(struct pt_regs *regs,*/ if (unlikely (!(uc_flags &UC_STRICT_RESTORE_SS ) &&user_64bit_mode (regs)))force_valid_ss (regs); + +if (uc_flags &UC_WAIT_ENDBR ) +ibt_set_wait_endbr ();#endif return fpu__restore_sig((void __user *)sc.fpstate,
@@ -455,6 +458,9 @@ static unsigned long frame_uc_flags(struct pt_regs *regs)if (likely (user_64bit_mode (regs))) flags |=UC_STRICT_RESTORE_SS ; +if (ibt_get_clear_wait_endbr ()) + flags |=UC_WAIT_ENDBR ; +return flags; }
Signature · 1 line
2.21.0
PATCH v28 4/10 x86/cet/ibt: Disable IBT for ia32
In reply to Yu-cheng YuIn a signal, a task's IBT status needs to be saved to the signal frame, and later restored in sigreturn. For the purpose, previous versions of the series add a new struct to the signal frame. However, a new signal frame format (or re-using a reserved space) introduces complex compatibility issues.
In the discussion (see link below), Andy Lutomirski proposed using a ucontext flag. The approach is clean and eliminates most compatibility issues.
However, a legacy IA32 signal frame does not have ucontext and cannot support a uc flag. Thus,
- Disable IBT for ia32.
- In ia32 sigreturn, verify ibt is disabled.
--- arch/x86/ia32/ia32_signal.c | 7 +++++++ arch/x86/include/asm/elf.h | 13 ++++++++++++- 2 files changed, 19 insertions(+), 1 deletion(-)
arch/x86/ia32/ia32_signal.c +7 -0
@@ -104,6 +104,13 @@ COMPAT_SYSCALL_DEFINE0(sigreturn)struct sigframe_ia32 __user *frame = (struct sigframe_ia32 __user *)(regs->sp-8 );sigset_t set; +/* +* Verify legacy sigreturn does not have IBT enabled. +*/ +#ifdef CONFIG_X86_IBT +if (current->thread.shstk.ibt) + goto badframe; +#endif if (!access_ok (frame,sizeof (*frame))) goto badframe; if (__get_user(set.sig[0], &frame->sc.oldmask)
arch/x86/include/asm/elf.h +12 -1
@@ -6,6 +6,7 @@* ELF register definitions.. */ #include <linux/thread_info.h> +#include <uapi/linux/elf.h> #include <asm/ptrace.h> #include <asm/user.h>
@@ -403,7 +404,17 @@ struct arch_elf_state { }#define arch_elf_pt_proc (ehdr, phdr, elf, interp, state) (0) -#define arch_check_elf (ehdr, interp, interp_ehdr, state) (0) +static inline int arch_check_elf (void *ehdr,bool interp, +void *interp_ehdr, +struct arch_elf_state *state) +{ +/* +* Disable IBT for ia32 +*/ +if (elf_check_arch_ia32 ((struct elf32_hdr *)ehdr)) + state->gnu_property &= ~GNU_PROPERTY_X86_FEATURE_1_IBT ; +return 0 ; +}/* Do not change the values. See get_align_mask() */ enum align_flags {
Signature · 1 line
2.21.0
Re: [PATCH v28 04/10] x86/cet/ibt: Disable IBT for ia32
Quoted 10 lines · Yu-cheng Yu
In a signal, a task's IBT status needs to be saved to the signal frame, and later restored in sigreturn. For the purpose, previous versions of the series add a new struct to the signal frame. However, a new signal frame format (or re-using a reserved space) introduces complex compatibility issues.
In the discussion (see link below), Andy Lutomirski proposed using a ucontext flag. The approach is clean and eliminates most compatibility issues.
Quoted 5 lines
However, a legacy IA32 signal frame does not have ucontext and cannot support a uc flag. Thus,
- Disable IBT for ia32.
- In ia32 sigreturn, verify ibt is disabled.
Re: [PATCH v28 04/10] x86/cet/ibt: Disable IBT for ia32
Quoted 11 lines · Andy Lutomirski
Quoted 10 lines · Yu-cheng Yu
In a signal, a task's IBT status needs to be saved to the signal frame, and later restored in sigreturn. For the purpose, previous versions of the series add a new struct to the signal frame. However, a new signal frame format (or re-using a reserved space) introduces complex compatibility issues.
In the discussion (see link below), Andy Lutomirski proposed using a ucontext flag. The approach is clean and eliminates most compatibility issues.
Quoted 8 lines
Quoted 5 lines
However, a legacy IA32 signal frame does not have ucontext and cannot support a uc flag. Thus,
- Disable IBT for ia32.
- In ia32 sigreturn, verify ibt is disabled.Acked-by Andy Lutomirski <[email protected]>
Thanks!
PATCH v28 5/10 x86/cet/ibt: Update ELF header parsing for Indirect Branch Tracking
In reply to Yu-cheng YuAn ELF file's .note.gnu.property indicates features the file supports. The property is parsed at loading time and passed to arch_setup_elf_ property(). Update it for Indirect Branch Tracking.
---
v27:
- Remove selecting of ARCH_USE_GNU_PROPERTY and ARCH_BINFMT_ELF_STATE, since they are already selected by X86_64.
arch/x86/kernel/process_64.c | 6 ++++++ 1 file changed, 6 insertions(+)
arch/x86/kernel/process_64.c +6 -0
@@ -884,6 +884,12 @@ int arch_setup_elf_property(struct arch_elf_state *state)if (state->gnu_property &GNU_PROPERTY_X86_FEATURE_1_SHSTK ) r =shstk_setup (); + +if (r <0 ) +return r; + +if (state->gnu_property &GNU_PROPERTY_X86_FEATURE_1_IBT ) + r =ibt_setup ();#endif return r;
Signature · 1 line
2.21.0
PATCH v28 6/10 x86/cet/ibt: Update arch_prctl functions for Indirect Branch Tracking
In reply to Yu-cheng YuFrom: "H.J. Lu" <[email protected]>
Update ARCH_X86_CET_STATUS and ARCH_X86_CET_DISABLE for Indirect Branch Tracking.
--- arch/x86/kernel/cet_prctl.c | 5 +++++ 1 file changed, 5 insertions(+)
arch/x86/kernel/cet_prctl.c +5 -0
@@ -22,6 +22,9 @@ static int cet_copy_status_to_user(struct thread_shstk *shstk, u64 __user *ubuf) buf[2 ] = shstk->size; } +if (shstk->ibt) + buf[0 ] |=GNU_PROPERTY_X86_FEATURE_1_IBT ; +return copy_to_user (ubuf, buf,sizeof (buf)); }
@@ -46,6 +49,8 @@ int prctl_cet(int option, u64 arg2)return -EINVAL ;if (arg2 &GNU_PROPERTY_X86_FEATURE_1_SHSTK )shstk_disable (); +if (arg2 &GNU_PROPERTY_X86_FEATURE_1_IBT ) +ibt_disable ();return 0 ;case ARCH_X86_CET_LOCK :
Signature · 1 line
2.21.0
PATCH v28 7/10 x86/vdso: Insert endbr32/endbr64 to vDSO
In reply to Yu-cheng YuFrom: "H.J. Lu" <[email protected]>
When Indirect Branch Tracking (IBT) is enabled, vDSO entry points need ENDBR32/ENDBR64 as first instructions. Kconfig X86_IBT verifies compiler's -fcf-protection support. Update vDso Makefile to enable it.
--- arch/x86/entry/vdso/Makefile | 4 ++++ 1 file changed, 4 insertions(+)
arch/x86/entry/vdso/Makefile +4 -0
@@ -93,6 +93,10 @@ endif $(vobjs): KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_LTO) $(GCC_PLUGINS_CFLAGS) $(RETPOLINE_CFLAGS),$(KBUILD_CFLAGS)) $(CFL) +ifdef CONFIG_X86_IBT +$(vobjs) $(vobjs32): KBUILD_CFLAGS += -fcf-protection=branch +endif + # # vDSO code runs in userspace and -pg doesn't help with profiling anyway. #
Signature · 1 line
2.21.0
PATCH v28 8/10 x86/vdso: Introduce ENDBR macro
In reply to Yu-cheng YuENDBR is a special new instruction for the Indirect Branch Tracking (IBT) component of CET. IBT prevents attacks by ensuring that (most) indirect branches and function calls may only land at ENDBR instructions. Branches that don't follow the rules will result in control flow (#CF) exceptions.
ENDBR is a noop when IBT is unsupported or disabled. Most ENDBR instructions are inserted automatically by the compiler, but branch targets written in assembly must have ENDBR added manually.
Introduce ENDBR64/ENDBR32 macros.
--- arch/x86/include/asm/vdso.h | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
arch/x86/include/asm/vdso.h +19 -1
@@ -52,6 +52,24 @@ extern int map_vdso_once(const struct vdso_image *image, unsigned long addr);extern bool fixup_vdso_exception (struct pt_regs *regs,int trapnr,unsigned long error_code,unsigned long fault_addr); -#endif /* __ASSEMBLER__ */ +#else /* __ASSEMBLER__ */ + +/* +* ENDBR is an instruction for the Indirect Branch Tracking (IBT) component +* of CET. IBT prevents attacks by ensuring that (most) indirect branches +* function calls may only land at ENDBR instructions. Branches that don't +* follow the rules will result in control flow (#CF) exceptions. +* ENDBR is a noop when IBT is unsupported or disabled. Most ENDBR +* instructions are inserted automatically by the compiler, but branch +* targets written in assembly must have ENDBR added manually. +*/ +#ifdef CONFIG_X86_IBT +#define ENDBR64 endbr64 +#define ENDBR32 endbr32 +#else +#define ENDBR64 +#define ENDBR32 +#endif +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_VDSO_H */
Signature · 1 line
2.21.0
PATCH v28 9/10 x86/vdso/32: Add ENDBR to __kernel_vsyscall entry point
In reply to Yu-cheng YuFrom: "H.J. Lu" <[email protected]>
ENDBR is a special new instruction for the Indirect Branch Tracking (IBT) component of CET. IBT prevents attacks by ensuring that (most) indirect branches and function calls may only land at ENDBR instructions. Branches that don't follow the rules will result in control flow (#CF) exceptions.
ENDBR is a noop when IBT is unsupported or disabled. Most ENDBR instructions are inserted automatically by the compiler, but branch targets written in assembly must have ENDBR added manually.
Add that to __kernel_vsyscall entry point.
--- arch/x86/entry/vdso/vdso32/system_call.S | 2 ++ 1 file changed, 2 insertions(+)
arch/x86/entry/vdso/vdso32/system_call.S +2 -0
@@ -7,6 +7,7 @@ #include <asm/dwarf2.h> #include <asm/cpufeatures.h> #include <asm/alternative.h> +#include <asm/vdso.h> .text .globl __kernel_vsyscall
@@ -14,6 +15,7 @@ ALIGN __kernel_vsyscall: CFI_STARTPROC + ENDBR32 /* * Reshuffle regs so that all of any of the entry instructions * will preserve enough state.
Signature · 1 line
2.21.0
PATCH v28 10/10 x86/vdso: Add ENDBR to __vdso_sgx_enter_enclave
In reply to Yu-cheng YuENDBR is a special new instruction for the Indirect Branch Tracking (IBT) component of CET. IBT prevents attacks by ensuring that (most) indirect branches and function calls may only land at ENDBR instructions. Branches that don't follow the rules will result in control flow (#CF) exceptions.
ENDBR is a noop when IBT is unsupported or disabled. Most ENDBR instructions are inserted automatically by the compiler, but branch targets written in assembly must have ENDBR added manually.
Add ENDBR to __vdso_sgx_enter_enclave() indirect branch targets, including EEXIT, which is considered an indirect branch.
---
v28:
- Move ENDBR64 below EEXIT comment (no functional change).
- Update change log, state EEXIT is considered an indirect branch.
arch/x86/entry/vdso/vsgx.S | 4 ++++ 1 file changed, 4 insertions(+)
arch/x86/entry/vdso/vsgx.S +4 -0
@@ -4,6 +4,7 @@ #include <asm/export.h> #include <asm/errno.h> #include <asm/enclu.h> +#include <asm/vdso.h> #include "extable.h"
@@ -27,6 +28,7 @@ SYM_FUNC_START(__vdso_sgx_enter_enclave) /* Prolog */ .cfi_startproc + ENDBR64 push %rbp .cfi_adjust_cfa_offset 8 .cfi_rel_offset %rbp, 0
@@ -64,6 +66,7 @@ SYM_FUNC_START(__vdso_sgx_enter_enclave) enclu /* EEXIT jumps here unless the enclave is doing something fancy. */ + ENDBR64 mov SGX_ENCLAVE_OFFSET_OF_RUN(%rbp), %rbx /* Set exit_reason. */
@@ -91,6 +94,7 @@ SYM_FUNC_START(__vdso_sgx_enter_enclave) jmp .Lout .Lhandle_exception: + ENDBR64 mov SGX_ENCLAVE_OFFSET_OF_RUN(%rbp), %rbx /* Set the exception info. */
Signature · 1 line
2.21.0