NVIDIA Tegra ARM32 device-tree patches for 5.17
Subsystems (3)
cover NVIDIA Tegra ARM32 device-tree patches for 5.17
In this patchset you will find:
- New device-trees of ASUS Transformer and Pegatron Chagall tablets.
- New device-tree of Nyan Big Chromebook variant that has 1080p display panel.
- Enabled video decoder on Tegra114.
- Minor cleanup of Nexus7 device-tree.
- Renamed clocks and regulator nodes. I'm sending this patch second time because previously there was no good reason given about why not to apply it. Please apply it this time.
Anton Bambura (3):
ARM: tegra: Add labels to tegra114.dtsi
ARM: tegra: Add device-tree for Asus Transformer Pad TF701T
ARM: tegra: Enable video decoder on Tegra114
David Heidelberg (3):
dt-bindings: ARM: tegra: Document Pegatron Chagall
ARM: tegra: Name clock and regulator nodes according to DT-schema
ARM: tegra: nexus7: Drop clock-frequency from NFC node
Dmitry Osipenko (1):
ARM: tegra: Add device-tree for 1080p version of Nyan Big
Michał Mirosław (1):
ARM: tegra: Add device-tree for ASUS Transformer Pad TF300T
Nikola Milosavljevic (1):
ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101
Svyatoslav Ryhel (5):
dt-bindings: ARM: tegra: Document ASUS Transformers
ARM: tegra: Add device-tree for ASUS Transformer Prime TF201
ARM: tegra: Add device-tree for ASUS Transformer Pad TF300TG
ARM: tegra: Add device-tree for ASUS Transformer Infinity TF700T
ARM: tegra: Add device-tree for Pegatron Chagall tablet
.../devicetree/bindings/arm/tegra.yaml | 19 + arch/arm/boot/dts/Makefile | 10 +- arch/arm/boot/dts/tegra114-asus-tf701t.dts | 832 +++++ arch/arm/boot/dts/tegra114-dalmore.dts | 16 +- arch/arm/boot/dts/tegra114-roth.dts | 14 +- arch/arm/boot/dts/tegra114-tn7.dts | 8 +- arch/arm/boot/dts/tegra114.dtsi | 90 +- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 26 +- arch/arm/boot/dts/tegra124-nyan-big-fhd.dts | 10 + arch/arm/boot/dts/tegra124-nyan.dtsi | 28 +- arch/arm/boot/dts/tegra124-venice2.dts | 28 +- .../boot/dts/tegra20-acer-a500-picasso.dts | 12 +- arch/arm/boot/dts/tegra20-asus-tf101.dts | 1187 +++++++ arch/arm/boot/dts/tegra20-harmony.dts | 16 +- arch/arm/boot/dts/tegra20-medcom-wide.dts | 8 +- arch/arm/boot/dts/tegra20-paz00.dts | 6 +- arch/arm/boot/dts/tegra20-plutux.dts | 8 +- arch/arm/boot/dts/tegra20-seaboard.dts | 16 +- arch/arm/boot/dts/tegra20-tamonten.dtsi | 4 +- arch/arm/boot/dts/tegra20-tec.dts | 8 +- arch/arm/boot/dts/tegra20-trimslice.dts | 12 +- arch/arm/boot/dts/tegra20-ventana.dts | 12 +- .../boot/dts/tegra30-asus-lvds-display.dtsi | 46 + .../tegra30-asus-nexus7-grouper-common.dtsi | 10 +- ...egra30-asus-nexus7-grouper-maxim-pmic.dtsi | 4 +- .../tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 2 +- .../boot/dts/tegra30-asus-nexus7-grouper.dtsi | 1 - .../boot/dts/tegra30-asus-nexus7-tilapia.dtsi | 2 - arch/arm/boot/dts/tegra30-asus-tf201.dts | 623 ++++ arch/arm/boot/dts/tegra30-asus-tf300t.dts | 1030 ++++++ arch/arm/boot/dts/tegra30-asus-tf300tg.dts | 1072 +++++++ arch/arm/boot/dts/tegra30-asus-tf700t.dts | 807 +++++ .../dts/tegra30-asus-transformer-common.dtsi | 1751 ++++++++++ arch/arm/boot/dts/tegra30-beaver.dts | 20 +- arch/arm/boot/dts/tegra30-cardhu-a02.dts | 12 +- arch/arm/boot/dts/tegra30-cardhu-a04.dts | 14 +- arch/arm/boot/dts/tegra30-cardhu.dtsi | 28 +- .../arm/boot/dts/tegra30-pegatron-chagall.dts | 2806 +++++++++++++++++ 38 files changed, 10412 insertions(+), 186 deletions(-) create mode 100644 arch/arm/boot/dts/tegra114-asus-tf701t.dts create mode 100644 arch/arm/boot/dts/tegra124-nyan-big-fhd.dts create mode 100644 arch/arm/boot/dts/tegra20-asus-tf101.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi create mode 100644 arch/arm/boot/dts/tegra30-asus-tf201.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300t.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300tg.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-tf700t.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi create mode 100644 arch/arm/boot/dts/tegra30-pegatron-chagall.dts
Signature · 1 line
2.33.1
PATCH 1/14 dt-bindings: ARM: tegra: Document ASUS Transformers
From: Svyatoslav Ryhel <[email protected]>
Document Tegra20/30/114-based ASUS Transformer Series tablet devices. This group includes EeePad TF101, Prime TF201, Pad TF300T, TF300TG Infinity TF700T, TF701T.
--- Documentation/devicetree/bindings/arm/tegra.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
Documentation/devicetree/bindings/arm/tegra.yaml +16 -0
@@ -36,6 +36,9 @@ properties: - toradex,colibri_t20-iris - const: toradex,colibri_t20 - const: nvidia,tegra20 + - items: + - const: asus,tf101 + - const: nvidia,tegra20 - items: - const: acer,picasso - const: nvidia,tegra20
@@ -49,6 +52,18 @@ properties: - nvidia,cardhu-a04 - const: nvidia,cardhu - const: nvidia,tegra30 + - items: + - const: asus,tf201 + - const: nvidia,tegra30 + - items: + - const: asus,tf300t + - const: nvidia,tegra30 + - items: + - const: asus,tf300tg + - const: nvidia,tegra30 + - items: + - const: asus,tf700t + - const: nvidia,tegra30 - items: - const: toradex,apalis_t30-eval - const: toradex,apalis_t30
@@ -76,6 +91,7 @@ properties: - const: nvidia,tegra30 - items: - enum: + - asus,tf701t - nvidia,dalmore - nvidia,roth - nvidia,tn7
Signature · 1 line
2.33.1
PATCH 2/14 dt-bindings: ARM: tegra: Document Pegatron Chagall
In reply to Dmitry OsipenkoFrom: David Heidelberg <[email protected]>
Document Pegatron Chagall, which is Tegra30-based tablet device.
--- Documentation/devicetree/bindings/arm/tegra.yaml | 3 +++ 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/arm/tegra.yaml +3 -0
@@ -89,6 +89,9 @@ properties: - items: - const: ouya,ouya - const: nvidia,tegra30 + - items: + - const: pegatron,chagall + - const: nvidia,tegra30 - items: - enum: - asus,tf701t
Signature · 1 line
2.33.1
PATCH 3/14 ARM: tegra: Add labels to tegra114.dtsi
In reply to Dmitry OsipenkoFrom: Anton Bambura <[email protected]>
Add more labels in order to use label reference in device-specific dts files. Labels make device-trees more readable and prevent typos that are difficult to notice.
--- arch/arm/boot/dts/tegra114.dtsi | 52 ++++++++++++++++----------------- 1 file changed, 26 insertions(+), 26 deletions(-)
arch/arm/boot/dts/tegra114.dtsi +26 -26
@@ -93,7 +93,7 @@ rgb { }; }; - hdmi@54280000 { + hdmi: hdmi@54280000 { compatible = "nvidia,tegra114-hdmi"; reg = <0x54280000 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -105,7 +105,7 @@ hdmi@54280000 { status = "disabled"; }; - dsi@54300000 { + dsia: dsi@54300000 { compatible = "nvidia,tegra114-dsi"; reg = <0x54300000 0x00040000>; clocks = <&tegra_car TEGRA114_CLK_DSIA>,
@@ -121,7 +121,7 @@ dsi@54300000 { #size-cells = <0>; }; - dsi@54400000 { + dsib: dsi@54400000 { compatible = "nvidia,tegra114-dsi"; reg = <0x54400000 0x00040000>; clocks = <&tegra_car TEGRA114_CLK_DSIB>,
@@ -335,7 +335,7 @@ pwm: pwm@7000a000 { status = "disabled"; }; - i2c@7000c000 { + i2c1: i2c@7000c000 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c000 0x100>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -350,7 +350,7 @@ i2c@7000c000 { status = "disabled"; }; - i2c@7000c400 { + i2c2: i2c@7000c400 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c400 0x100>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -365,7 +365,7 @@ i2c@7000c400 { status = "disabled"; }; - i2c@7000c500 { + i2c3: i2c@7000c500 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c500 0x100>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -380,7 +380,7 @@ i2c@7000c500 { status = "disabled"; }; - i2c@7000c700 { + i2c4: i2c@7000c700 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c700 0x100>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -395,7 +395,7 @@ i2c@7000c700 { status = "disabled"; }; - i2c@7000d000 { + i2c5: i2c@7000d000 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000d000 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -410,7 +410,7 @@ i2c@7000d000 { status = "disabled"; }; - spi@7000d400 { + spi1: spi@7000d400 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d400 0x200>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
@@ -425,7 +425,7 @@ spi@7000d400 { status = "disabled"; }; - spi@7000d600 { + spi2: spi@7000d600 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d600 0x200>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -440,7 +440,7 @@ spi@7000d600 { status = "disabled"; }; - spi@7000d800 { + spi3: spi@7000d800 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d800 0x200>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -455,7 +455,7 @@ spi@7000d800 { status = "disabled"; }; - spi@7000da00 { + spi4: spi@7000da00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000da00 0x200>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -470,7 +470,7 @@ spi@7000da00 { status = "disabled"; }; - spi@7000dc00 { + spi5: spi@7000dc00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000dc00 0x200>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
@@ -485,7 +485,7 @@ spi@7000dc00 { status = "disabled"; }; - spi@7000de00 { + spi6: spi@7000de00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000de00 0x200>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -500,14 +500,14 @@ spi@7000de00 { status = "disabled"; }; - rtc@7000e000 { + tegra_rtc: rtc@7000e000 { compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA114_CLK_RTC>; }; - kbc@7000e200 { + tegra_kbc: kbc@7000e200 { compatible = "nvidia,tegra114-kbc"; reg = <0x7000e200 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -646,7 +646,7 @@ mipi: mipi@700e3000 { #nvidia,mipi-calibrate-cells = <1>; }; - mmc@78000000 { + sdmmc1: mmc@78000000 { compatible = "nvidia,tegra114-sdhci"; reg = <0x78000000 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -657,7 +657,7 @@ mmc@78000000 { status = "disabled"; }; - mmc@78000200 { + sdmmc2: mmc@78000200 { compatible = "nvidia,tegra114-sdhci"; reg = <0x78000200 0x200>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -668,7 +668,7 @@ mmc@78000200 { status = "disabled"; }; - mmc@78000400 { + sdmmc3: mmc@78000400 { compatible = "nvidia,tegra114-sdhci"; reg = <0x78000400 0x200>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -679,7 +679,7 @@ mmc@78000400 { status = "disabled"; }; - mmc@78000600 { + sdmmc4: mmc@78000600 { compatible = "nvidia,tegra114-sdhci"; reg = <0x78000600 0x200>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -690,7 +690,7 @@ mmc@78000600 { status = "disabled"; }; - usb@7d000000 { + usb1: usb@7d000000 { compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci"; reg = <0x7d000000 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -698,11 +698,11 @@ usb@7d000000 { clocks = <&tegra_car TEGRA114_CLK_USBD>; resets = <&tegra_car 22>; reset-names = "usb"; - nvidia,phy = <&phy1>; + nvidia,phy = <&usb1_phy>; status = "disabled"; }; - phy1: usb-phy@7d000000 { + usb1_phy: usb-phy@7d000000 { compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x7d000000 0x4000>, <0x7d000000 0x4000>;
@@ -730,7 +730,7 @@ phy1: usb-phy@7d000000 { status = "disabled"; }; - usb@7d008000 { + usb3: usb@7d008000 { compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci"; reg = <0x7d008000 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -738,11 +738,11 @@ usb@7d008000 { clocks = <&tegra_car TEGRA114_CLK_USB3>; resets = <&tegra_car 59>; reset-names = "usb"; - nvidia,phy = <&phy3>; + nvidia,phy = <&usb3_phy>; status = "disabled"; }; - phy3: usb-phy@7d008000 { + usb3_phy: usb-phy@7d008000 { compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x7d008000 0x4000>, <0x7d000000 0x4000>;
Signature · 1 line
2.33.1
PATCH 4/14 ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101
In reply to Dmitry OsipenkoFrom: Nikola Milosavljevic <[email protected]>
Add device-tree for Tegra20-based ASUS Transformer EeePad TF101.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra20-asus-tf101.dts | 1187 ++++++++++++++++++++++ 2 files changed, 1188 insertions(+) create mode 100644 arch/arm/boot/dts/tegra20-asus-tf101.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1304,6 +1304,7 @@ dtb-$(CONFIG_MACH_SUNIV) += \ suniv-f1c100s-licheepi-nano.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-acer-a500-picasso.dtb \ + tegra20-asus-tf101.dtb \ tegra20-harmony.dtb \ tegra20-colibri-eval-v3.dtb \ tegra20-colibri-iris.dtb \
arch/arm/boot/dts/tegra20-asus-tf101.dts new file +1187 -0
1,187 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH 5/14 ARM: tegra: Add device-tree for ASUS Transformer Prime TF201
In reply to Dmitry OsipenkoFrom: Svyatoslav Ryhel <[email protected]>
Add device-tree for ASUS Transformer Prime TF201, which is NVIDIA Tegra30-based tablet device.
--- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/tegra30-asus-lvds-display.dtsi | 46 + arch/arm/boot/dts/tegra30-asus-tf201.dts | 623 ++++++ .../dts/tegra30-asus-transformer-common.dtsi | 1751 +++++++++++++++++ 4 files changed, 2421 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi create mode 100644 arch/arm/boot/dts/tegra30-asus-tf201.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
arch/arm/boot/dts/Makefile +1 -0
@@ -1321,6 +1321,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-asus-nexus7-grouper-PM269.dtb \ tegra30-asus-nexus7-grouper-E1565.dtb \ tegra30-asus-nexus7-tilapia-E1565.dtb \ + tegra30-asus-tf201.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi new file +46 -0
46 lines not on this page · raw message
arch/arm/boot/dts/tegra30-asus-tf201.dts new file +623 -0
623 lines not on this page · raw message
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi new file +1751 -0
1,751 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH 6/14 ARM: tegra: Add device-tree for ASUS Transformer Pad TF300T
In reply to Dmitry OsipenkoFrom: Michał Mirosław <[email protected]>
Add device-tree for ASUS Transformer Pad TF300T, which is NVIDIA Tegra30-based tablet device.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra30-asus-tf300t.dts | 1030 +++++++++++++++++++++ 2 files changed, 1031 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300t.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1322,6 +1322,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-asus-nexus7-grouper-E1565.dtb \ tegra30-asus-nexus7-tilapia-E1565.dtb \ tegra30-asus-tf201.dtb \ + tegra30-asus-tf300t.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf300t.dts new file +1030 -0
1,030 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH 7/14 ARM: tegra: Add device-tree for ASUS Transformer Pad TF300TG
In reply to Dmitry OsipenkoFrom: Svyatoslav Ryhel <[email protected]>
Add device-tree for ASUS Transformer Pad TF300TG, which is NVIDIA Tegra30-based tablet device, a variant of TF300T that has 3g modem.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra30-asus-tf300tg.dts | 1072 ++++++++++++++++++++ 2 files changed, 1073 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300tg.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1323,6 +1323,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-asus-nexus7-tilapia-E1565.dtb \ tegra30-asus-tf201.dtb \ tegra30-asus-tf300t.dtb \ + tegra30-asus-tf300tg.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf300tg.dts new file +1072 -0
1,072 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH 8/14 ARM: tegra: Add device-tree for ASUS Transformer Infinity TF700T
In reply to Dmitry OsipenkoFrom: Svyatoslav Ryhel <[email protected]>
Add device-tree for ASUS Transformer Infinity TF700T, which is NVIDIA Tegra30-based tablet device.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra30-asus-tf700t.dts | 807 ++++++++++++++++++++++ 2 files changed, 808 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-tf700t.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1324,6 +1324,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-asus-tf201.dtb \ tegra30-asus-tf300t.dtb \ tegra30-asus-tf300tg.dtb \ + tegra30-asus-tf700t.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf700t.dts new file +807 -0
807 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH 9/14 ARM: tegra: Add device-tree for Pegatron Chagall tablet
In reply to Dmitry OsipenkoFrom: Svyatoslav Ryhel <[email protected]>
Add device-tree for Pegatron Chagall, which is NVIDIA Tegra30-based Android tablet.
--- arch/arm/boot/dts/Makefile | 3 +- .../arm/boot/dts/tegra30-pegatron-chagall.dts | 2806 +++++++++++++++++ 2 files changed, 2808 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/tegra30-pegatron-chagall.dts
arch/arm/boot/dts/Makefile +2 -1
@@ -1329,7 +1329,8 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ tegra30-colibri-eval-v3.dtb \ - tegra30-ouya.dtb + tegra30-ouya.dtb \ + tegra30-pegatron-chagall.dtb dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ tegra114-dalmore.dtb \ tegra114-roth.dtb \
arch/arm/boot/dts/tegra30-pegatron-chagall.dts new file +2806 -0
2,806 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH 10/14 ARM: tegra: Add device-tree for Asus Transformer Pad TF701T
In reply to Dmitry OsipenkoFrom: Anton Bambura <[email protected]>
Add device-tree for Tegra114-based Asus Transformer Pad TF701T (K00C) tablet.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra114-asus-tf701t.dts | 832 +++++++++++++++++++++ 2 files changed, 833 insertions(+) create mode 100644 arch/arm/boot/dts/tegra114-asus-tf701t.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1332,6 +1332,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-ouya.dtb \ tegra30-pegatron-chagall.dtb dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ + tegra114-asus-tf701t.dtb \ tegra114-dalmore.dtb \ tegra114-roth.dtb \ tegra114-tn7.dtb
arch/arm/boot/dts/tegra114-asus-tf701t.dts new file +832 -0
832 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH 11/14 ARM: tegra: Add device-tree for 1080p version of Nyan Big
In reply to Dmitry OsipenkoAdd dedicated device-tree for 1080p version of Nyan Big in order to describe display panel properly. FHD panel doesn't support modes other than 1080p, hence it's wrong to use incompatible lower resolution panel in device-tree.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra124-nyan-big-fhd.dts | 10 ++++++++++ 2 files changed, 11 insertions(+) create mode 100644 arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1341,6 +1341,7 @@ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \ tegra124-apalis-v1.2-eval.dtb \ tegra124-jetson-tk1.dtb \ tegra124-nyan-big.dtb \ + tegra124-nyan-big-fhd.dtb \ tegra124-nyan-blaze.dtb \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_U8500) += \
arch/arm/boot/dts/tegra124-nyan-big-fhd.dts new file +10 -0
@@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra124-nyan-big.dts" + +/ { + panel { + compatible = "auo,b133htn01"; + }; +};
Signature · 1 line
2.33.1
PATCH 12/14 ARM: tegra: Name clock and regulator nodes according to DT-schema
In reply to Dmitry OsipenkoFrom: David Heidelberg <[email protected]>
Name clocks and regulators according to DT-schema to fix warnings such as:
arch/arm/boot/dts/tegra20-acer-a500-picasso.dt.yaml: /: clock@0: 'anyOf' conditional failed, one must be fixed:
'reg' is a required property
'ranges' is a required property
From schema: /home/runner/.local/lib/python3.8/site-packages/dtschema/schemas/root-node.yaml
--- arch/arm/boot/dts/tegra114-dalmore.dts | 16 +++++------ arch/arm/boot/dts/tegra114-roth.dts | 14 +++++----- arch/arm/boot/dts/tegra114-tn7.dts | 8 +++--- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 26 ++++++++--------- arch/arm/boot/dts/tegra124-nyan.dtsi | 28 +++++++++---------- arch/arm/boot/dts/tegra124-venice2.dts | 28 +++++++++---------- .../boot/dts/tegra20-acer-a500-picasso.dts | 12 ++++---- arch/arm/boot/dts/tegra20-harmony.dts | 16 +++++------ arch/arm/boot/dts/tegra20-medcom-wide.dts | 8 +++--- arch/arm/boot/dts/tegra20-paz00.dts | 6 ++-- arch/arm/boot/dts/tegra20-plutux.dts | 8 +++--- arch/arm/boot/dts/tegra20-seaboard.dts | 16 +++++------ arch/arm/boot/dts/tegra20-tamonten.dtsi | 4 +-- arch/arm/boot/dts/tegra20-tec.dts | 8 +++--- arch/arm/boot/dts/tegra20-trimslice.dts | 12 ++++---- arch/arm/boot/dts/tegra20-ventana.dts | 12 ++++---- .../tegra30-asus-nexus7-grouper-common.dtsi | 10 +++---- ...egra30-asus-nexus7-grouper-maxim-pmic.dtsi | 4 +-- .../tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 2 +- arch/arm/boot/dts/tegra30-beaver.dts | 20 ++++++------- arch/arm/boot/dts/tegra30-cardhu-a02.dts | 12 ++++---- arch/arm/boot/dts/tegra30-cardhu-a04.dts | 14 +++++----- arch/arm/boot/dts/tegra30-cardhu.dtsi | 28 +++++++++---------- 23 files changed, 156 insertions(+), 156 deletions(-)
arch/arm/boot/dts/tegra114-dalmore.dts +8 -8
@@ -1151,7 +1151,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1186,7 +1186,7 @@ volume_up { }; }; - vdd_ac_bat_reg: regulator@0 { + vdd_ac_bat_reg: regulator-acbat { compatible = "regulator-fixed"; regulator-name = "vdd_ac_bat"; regulator-min-microvolt = <5000000>;
@@ -1194,7 +1194,7 @@ vdd_ac_bat_reg: regulator@0 { regulator-always-on; }; - dvdd_ts_reg: regulator@1 { + dvdd_ts_reg: regulator-ts { compatible = "regulator-fixed"; regulator-name = "dvdd_ts"; regulator-min-microvolt = <1800000>;
@@ -1203,7 +1203,7 @@ dvdd_ts_reg: regulator@1 { gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; }; - usb1_vbus_reg: regulator@3 { + usb1_vbus_reg: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -1214,7 +1214,7 @@ usb1_vbus_reg: regulator@3 { vin-supply = <&tps65090_dcdc1_reg>; }; - usb3_vbus_reg: regulator@4 { + usb3_vbus_reg: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "usb2_vbus"; regulator-min-microvolt = <5000000>;
@@ -1225,7 +1225,7 @@ usb3_vbus_reg: regulator@4 { vin-supply = <&tps65090_dcdc1_reg>; }; - vdd_hdmi_reg: regulator@5 { + vdd_hdmi_reg: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "vdd_hdmi_5v0"; regulator-min-microvolt = <5000000>;
@@ -1233,7 +1233,7 @@ vdd_hdmi_reg: regulator@5 { vin-supply = <&tps65090_dcdc1_reg>; }; - vdd_cam_1v8_reg: regulator@6 { + vdd_cam_1v8_reg: regulator-cam { compatible = "regulator-fixed"; regulator-name = "vdd_cam_1v8_reg"; regulator-min-microvolt = <1800000>;
@@ -1242,7 +1242,7 @@ vdd_cam_1v8_reg: regulator@6 { gpio = <&palmas_gpio 6 0>; }; - vdd_5v0_hdmi: regulator@7 { + vdd_5v0_hdmi: regulator-hdmicon { compatible = "regulator-fixed"; regulator-name = "VDD_5V0_HDMI_CON"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra114-roth.dts +7 -7
@@ -1016,7 +1016,7 @@ backlight: backlight { enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1045,7 +1045,7 @@ power { }; }; - lcd_bl_en: regulator@0 { + lcd_bl_en: regulator-lcden { compatible = "regulator-fixed"; regulator-name = "lcd_bl_en"; regulator-min-microvolt = <5000000>;
@@ -1053,7 +1053,7 @@ lcd_bl_en: regulator@0 { regulator-boot-on; }; - vdd_lcd: regulator@1 { + vdd_lcd: regulator-lcd { compatible = "regulator-fixed"; regulator-name = "vdd_lcd_1v8"; regulator-min-microvolt = <1800000>;
@@ -1064,7 +1064,7 @@ vdd_lcd: regulator@1 { regulator-boot-on; }; - regulator@2 { + regulator-1v8ts { compatible = "regulator-fixed"; regulator-name = "vdd_1v8_ts"; regulator-min-microvolt = <1800000>;
@@ -1073,7 +1073,7 @@ regulator@2 { regulator-boot-on; }; - regulator@3 { + regulator-3v3ts { compatible = "regulator-fixed"; regulator-name = "vdd_3v3_ts"; regulator-min-microvolt = <3300000>;
@@ -1083,7 +1083,7 @@ regulator@3 { regulator-boot-on; }; - regulator@4 { + regulator-1v8com { compatible = "regulator-fixed"; regulator-name = "vdd_1v8_com"; regulator-min-microvolt = <1800000>;
@@ -1094,7 +1094,7 @@ regulator@4 { regulator-boot-on; }; - regulator@5 { + regulator-3v3com { compatible = "regulator-fixed"; regulator-name = "vdd_3v3_com"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra114-tn7.dts +4 -4
@@ -273,7 +273,7 @@ backlight: backlight { power-supply = <&lcd_bl_en>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -303,7 +303,7 @@ volume_up { }; /* FIXME: output of BQ24192 */ - vs_sys: regulator@0 { + vs_sys: regulator-vs { compatible = "regulator-fixed"; regulator-name = "VS_SYS"; regulator-min-microvolt = <4200000>;
@@ -312,7 +312,7 @@ vs_sys: regulator@0 { regulator-boot-on; }; - lcd_bl_en: regulator@1 { + lcd_bl_en: regulator-lcden { compatible = "regulator-fixed"; regulator-name = "VDD_LCD_BL"; regulator-min-microvolt = <16500000>;
@@ -323,7 +323,7 @@ lcd_bl_en: regulator@1 { regulator-boot-on; }; - vdd_lcd: regulator@2 { + vdd_lcd: regulator-lcd { compatible = "regulator-fixed"; regulator-name = "VD_LCD_1V8"; regulator-min-microvolt = <1800000>;
arch/arm/boot/dts/tegra124-jetson-tk1.dts +13 -13
@@ -1868,7 +1868,7 @@ usb-phy@7d008000 { vbus-supply = <&vdd_usb3_vbus>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1892,7 +1892,7 @@ power { }; }; - vdd_mux: regulator@0 { + vdd_mux: regulator-mux { compatible = "regulator-fixed"; regulator-name = "+VDD_MUX"; regulator-min-microvolt = <12000000>;
@@ -1901,7 +1901,7 @@ vdd_mux: regulator@0 { regulator-boot-on; }; - vdd_5v0_sys: regulator@1 { + vdd_5v0_sys: regulator-5v0sys { compatible = "regulator-fixed"; regulator-name = "+5V_SYS"; regulator-min-microvolt = <5000000>;
@@ -1911,7 +1911,7 @@ vdd_5v0_sys: regulator@1 { vin-supply = <&vdd_mux>; }; - vdd_3v3_sys: regulator@2 { + vdd_3v3_sys: regulator-3v3sys { compatible = "regulator-fixed"; regulator-name = "+3.3V_SYS"; regulator-min-microvolt = <3300000>;
@@ -1921,7 +1921,7 @@ vdd_3v3_sys: regulator@2 { vin-supply = <&vdd_mux>; }; - vdd_3v3_run: regulator@3 { + vdd_3v3_run: regulator-3v3run { compatible = "regulator-fixed"; regulator-name = "+3.3V_RUN"; regulator-min-microvolt = <3300000>;
@@ -1933,7 +1933,7 @@ vdd_3v3_run: regulator@3 { vin-supply = <&vdd_3v3_sys>; }; - vdd_3v3_hdmi: regulator@4 { + vdd_3v3_hdmi: regulator-3v3hdmi { compatible = "regulator-fixed"; regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; regulator-min-microvolt = <3300000>;
@@ -1941,7 +1941,7 @@ vdd_3v3_hdmi: regulator@4 { vin-supply = <&vdd_3v3_run>; }; - vdd_usb1_vbus: regulator@5 { + vdd_usb1_vbus: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "+USB0_VBUS_SW"; regulator-min-microvolt = <5000000>;
@@ -1952,7 +1952,7 @@ vdd_usb1_vbus: regulator@5 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb3_vbus: regulator@6 { + vdd_usb3_vbus: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_HS"; regulator-min-microvolt = <5000000>;
@@ -1963,7 +1963,7 @@ vdd_usb3_vbus: regulator@6 { vin-supply = <&vdd_5v0_sys>; }; - vdd_3v3_lp0: regulator@7 { + vdd_3v3_lp0: regulator-lp0 { compatible = "regulator-fixed"; regulator-name = "+3.3V_LP0"; regulator-min-microvolt = <3300000>;
@@ -1975,7 +1975,7 @@ vdd_3v3_lp0: regulator@7 { vin-supply = <&vdd_3v3_sys>; }; - vdd_hdmi_pll: regulator@8 { + vdd_hdmi_pll: regulator-hdmipll { compatible = "regulator-fixed"; regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; regulator-min-microvolt = <1050000>;
@@ -1984,7 +1984,7 @@ vdd_hdmi_pll: regulator@8 { vin-supply = <&vdd_1v05_run>; }; - vdd_5v0_hdmi: regulator@9 { + vdd_5v0_hdmi: regulator-hdmicon { compatible = "regulator-fixed"; regulator-name = "+5V_HDMI_CON"; regulator-min-microvolt = <5000000>;
@@ -1995,7 +1995,7 @@ vdd_5v0_hdmi: regulator@9 { }; /* Molex power connector */ - vdd_5v0_sata: regulator@10 { + vdd_5v0_sata: regulator-5v0sata { compatible = "regulator-fixed"; regulator-name = "+5V_SATA"; regulator-min-microvolt = <5000000>;
@@ -2005,7 +2005,7 @@ vdd_5v0_sata: regulator@10 { vin-supply = <&vdd_5v0_sys>; }; - vdd_12v0_sata: regulator@11 { + vdd_12v0_sata: regulator-12v0sata { compatible = "regulator-fixed"; regulator-name = "+12V_SATA"; regulator-min-microvolt = <12000000>;
arch/arm/boot/dts/tegra124-nyan.dtsi +14 -14
@@ -582,7 +582,7 @@ backlight: backlight { 256>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -615,7 +615,7 @@ power { }; }; - vdd_mux: regulator@0 { + vdd_mux: regulator-mux { compatible = "regulator-fixed"; regulator-name = "+VDD_MUX"; regulator-min-microvolt = <12000000>;
@@ -624,7 +624,7 @@ vdd_mux: regulator@0 { regulator-boot-on; }; - vdd_5v0_sys: regulator@1 { + vdd_5v0_sys: regulator-5v0sys { compatible = "regulator-fixed"; regulator-name = "+5V_SYS"; regulator-min-microvolt = <5000000>;
@@ -634,7 +634,7 @@ vdd_5v0_sys: regulator@1 { vin-supply = <&vdd_mux>; }; - vdd_3v3_sys: regulator@2 { + vdd_3v3_sys: regulator-3v3sys { compatible = "regulator-fixed"; regulator-name = "+3.3V_SYS"; regulator-min-microvolt = <3300000>;
@@ -644,7 +644,7 @@ vdd_3v3_sys: regulator@2 { vin-supply = <&vdd_mux>; }; - vdd_3v3_run: regulator@3 { + vdd_3v3_run: regulator-3v3run { compatible = "regulator-fixed"; regulator-name = "+3.3V_RUN"; regulator-min-microvolt = <3300000>;
@@ -656,7 +656,7 @@ vdd_3v3_run: regulator@3 { vin-supply = <&vdd_3v3_sys>; }; - vdd_3v3_hdmi: regulator@4 { + vdd_3v3_hdmi: regulator-3v3hdmi { compatible = "regulator-fixed"; regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; regulator-min-microvolt = <3300000>;
@@ -664,7 +664,7 @@ vdd_3v3_hdmi: regulator@4 { vin-supply = <&vdd_3v3_run>; }; - vdd_led: regulator@5 { + vdd_led: regulator-led { compatible = "regulator-fixed"; regulator-name = "+VDD_LED"; gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
@@ -672,7 +672,7 @@ vdd_led: regulator@5 { vin-supply = <&vdd_mux>; }; - vdd_5v0_ts: regulator@6 { + vdd_5v0_ts: regulator-ts { compatible = "regulator-fixed"; regulator-name = "+5V_VDD_TS_SW"; regulator-min-microvolt = <5000000>;
@@ -683,7 +683,7 @@ vdd_5v0_ts: regulator@6 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb1_vbus: regulator@7 { + vdd_usb1_vbus: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_HS"; regulator-min-microvolt = <5000000>;
@@ -694,7 +694,7 @@ vdd_usb1_vbus: regulator@7 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb3_vbus: regulator@8 { + vdd_usb3_vbus: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_SS"; regulator-min-microvolt = <5000000>;
@@ -705,7 +705,7 @@ vdd_usb3_vbus: regulator@8 { vin-supply = <&vdd_5v0_sys>; }; - vdd_3v3_panel: regulator@9 { + vdd_3v3_panel: regulator-panel { compatible = "regulator-fixed"; regulator-name = "+3.3V_PANEL"; regulator-min-microvolt = <3300000>;
@@ -715,7 +715,7 @@ vdd_3v3_panel: regulator@9 { vin-supply = <&vdd_3v3_run>; }; - vdd_3v3_lp0: regulator@10 { + vdd_3v3_lp0: regulator-lp0 { compatible = "regulator-fixed"; regulator-name = "+3.3V_LP0"; regulator-min-microvolt = <3300000>;
@@ -730,7 +730,7 @@ vdd_3v3_lp0: regulator@10 { vin-supply = <&vdd_3v3_sys>; }; - vdd_hdmi_pll: regulator@11 { + vdd_hdmi_pll: regulator-hdmipll { compatible = "regulator-fixed"; regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; regulator-min-microvolt = <1050000>;
@@ -739,7 +739,7 @@ vdd_hdmi_pll: regulator@11 { vin-supply = <&vdd_1v05_run>; }; - vdd_5v0_hdmi: regulator@12 { + vdd_5v0_hdmi: regulator-hdmicon { compatible = "regulator-fixed"; regulator-name = "+5V_HDMI_CON"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra124-venice2.dts +14 -14
@@ -1061,7 +1061,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1086,7 +1086,7 @@ panel: panel { ddc-i2c-bus = <&dpaux>; }; - vdd_mux: regulator@0 { + vdd_mux: regulator-mux { compatible = "regulator-fixed"; regulator-name = "+VDD_MUX"; regulator-min-microvolt = <12000000>;
@@ -1095,7 +1095,7 @@ vdd_mux: regulator@0 { regulator-boot-on; }; - vdd_5v0_sys: regulator@1 { + vdd_5v0_sys: regulator-5v0sys { compatible = "regulator-fixed"; regulator-name = "+5V_SYS"; regulator-min-microvolt = <5000000>;
@@ -1105,7 +1105,7 @@ vdd_5v0_sys: regulator@1 { vin-supply = <&vdd_mux>; }; - vdd_3v3_sys: regulator@2 { + vdd_3v3_sys: regulator-3v3sys { compatible = "regulator-fixed"; regulator-name = "+3.3V_SYS"; regulator-min-microvolt = <3300000>;
@@ -1115,7 +1115,7 @@ vdd_3v3_sys: regulator@2 { vin-supply = <&vdd_mux>; }; - vdd_3v3_run: regulator@3 { + vdd_3v3_run: regulator-3v3run { compatible = "regulator-fixed"; regulator-name = "+3.3V_RUN"; regulator-min-microvolt = <3300000>;
@@ -1127,7 +1127,7 @@ vdd_3v3_run: regulator@3 { vin-supply = <&vdd_3v3_sys>; }; - vdd_3v3_hdmi: regulator@4 { + vdd_3v3_hdmi: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; regulator-min-microvolt = <3300000>;
@@ -1135,7 +1135,7 @@ vdd_3v3_hdmi: regulator@4 { vin-supply = <&vdd_3v3_run>; }; - vdd_led: regulator@5 { + vdd_led: regulator-led { compatible = "regulator-fixed"; regulator-name = "+VDD_LED"; regulator-min-microvolt = <3300000>;
@@ -1145,7 +1145,7 @@ vdd_led: regulator@5 { vin-supply = <&vdd_mux>; }; - vdd_5v0_ts: regulator@6 { + vdd_5v0_ts: regulator-ts { compatible = "regulator-fixed"; regulator-name = "+5V_VDD_TS_SW"; regulator-min-microvolt = <5000000>;
@@ -1156,7 +1156,7 @@ vdd_5v0_ts: regulator@6 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb1_vbus: regulator@7 { + vdd_usb1_vbus: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_HS"; regulator-min-microvolt = <5000000>;
@@ -1167,7 +1167,7 @@ vdd_usb1_vbus: regulator@7 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb3_vbus: regulator@8 { + vdd_usb3_vbus: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_SS"; regulator-min-microvolt = <5000000>;
@@ -1178,7 +1178,7 @@ vdd_usb3_vbus: regulator@8 { vin-supply = <&vdd_5v0_sys>; }; - vdd_3v3_panel: regulator@9 { + vdd_3v3_panel: regulator-panel { compatible = "regulator-fixed"; regulator-name = "+3.3V_PANEL"; regulator-min-microvolt = <3300000>;
@@ -1188,7 +1188,7 @@ vdd_3v3_panel: regulator@9 { vin-supply = <&vdd_3v3_run>; }; - vdd_3v3_lp0: regulator@10 { + vdd_3v3_lp0: regulator-lp0 { compatible = "regulator-fixed"; regulator-name = "+3.3V_LP0"; regulator-min-microvolt = <3300000>;
@@ -1203,7 +1203,7 @@ vdd_3v3_lp0: regulator@10 { vin-supply = <&vdd_3v3_sys>; }; - vdd_hdmi_pll: regulator@11 { + vdd_hdmi_pll: regulator-hdmipll { compatible = "regulator-fixed"; regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; regulator-min-microvolt = <1050000>;
@@ -1212,7 +1212,7 @@ vdd_hdmi_pll: regulator@11 { vin-supply = <&vdd_1v05_run>; }; - vdd_5v0_hdmi: regulator@12 { + vdd_5v0_hdmi: regulator-hdmicon { compatible = "regulator-fixed"; regulator-name = "+5V_HDMI_CON"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +6 -6
@@ -827,7 +827,7 @@ bat1010: battery-2s1p { }; /* PMIC has a built-in 32KHz oscillator which is used by PMC */ - clk32k_in: clock@0 { + clk32k_in: clock-32k-in { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>;
@@ -839,7 +839,7 @@ clk32k_in: clock@0 { * oscillator is used as a reference clock-source by the * Azurewave WiFi/BT module. */ - rtc_32k_wifi: clock@1 { + rtc_32k_wifi: clock-32k-wifi { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>;
@@ -964,7 +964,7 @@ lvds_encoder_output: endpoint { }; }; - vdd_5v0_sys: regulator@0 { + vdd_5v0_sys: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -972,7 +972,7 @@ vdd_5v0_sys: regulator@0 { regulator-always-on; }; - vdd_3v3_sys: regulator@1 { + vdd_3v3_sys: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3_vs"; regulator-min-microvolt = <3300000>;
@@ -981,7 +981,7 @@ vdd_3v3_sys: regulator@1 { vin-supply = <&vdd_5v0_sys>; }; - vdd_1v8_sys: regulator@2 { + vdd_1v8_sys: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8_vs"; regulator-min-microvolt = <1800000>;
@@ -990,7 +990,7 @@ vdd_1v8_sys: regulator@2 { vin-supply = <&vdd_5v0_sys>; }; - vdd_pnl: regulator@3 { + vdd_pnl: regulator-panel { compatible = "regulator-fixed"; regulator-name = "vdd_panel"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra20-harmony.dts +8 -8
@@ -640,7 +640,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -666,7 +666,7 @@ panel: panel { backlight = <&backlight>; }; - vdd_5v0_reg: regulator@0 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -674,7 +674,7 @@ vdd_5v0_reg: regulator@0 { regulator-always-on; }; - regulator@1 { + regulator-1v5 { compatible = "regulator-fixed"; regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>;
@@ -682,7 +682,7 @@ regulator@1 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - regulator@2 { + regulator-1v2 { compatible = "regulator-fixed"; regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>;
@@ -691,7 +691,7 @@ regulator@2 { enable-active-high; }; - pci_vdd_reg: regulator@3 { + pci_vdd_reg: regulator-1v05 { compatible = "regulator-fixed"; regulator-name = "vdd_1v05"; regulator-min-microvolt = <1050000>;
@@ -700,7 +700,7 @@ pci_vdd_reg: regulator@3 { enable-active-high; }; - vdd_pnl_reg: regulator@4 { + vdd_pnl_reg: regulator-pn1 { compatible = "regulator-fixed"; regulator-name = "vdd_pnl"; regulator-min-microvolt = <2800000>;
@@ -709,7 +709,7 @@ vdd_pnl_reg: regulator@4 { enable-active-high; }; - vdd_bl_reg: regulator@5 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <2800000>;
@@ -718,7 +718,7 @@ vdd_bl_reg: regulator@5 { enable-active-high; }; - vdd_5v0_hdmi: regulator@6 { + vdd_5v0_hdmi: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "VDDIO_HDMI"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra20-medcom-wide.dts +4 -4
@@ -92,7 +92,7 @@ sound { clock-names = "pll_a", "pll_a_out0", "mclk"; }; - vcc_24v_reg: regulator@100 { + vcc_24v_reg: regulator-24v0 { compatible = "regulator-fixed"; regulator-name = "vcc_24v"; regulator-min-microvolt = <24000000>;
@@ -100,7 +100,7 @@ vcc_24v_reg: regulator@100 { regulator-always-on; }; - vdd_5v0_reg: regulator@101 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; vin-supply = <&vcc_24v_reg>;
@@ -109,7 +109,7 @@ vdd_5v0_reg: regulator@101 { regulator-always-on; }; - vdd_3v3_reg: regulator@102 { + vdd_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; vin-supply = <&vcc_24v_reg>;
@@ -118,7 +118,7 @@ vdd_3v3_reg: regulator@102 { regulator-always-on; }; - vdd_1v8_reg: regulator@103 { + vdd_1v8_reg: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8"; vin-supply = <&vdd_3v3_reg>;
arch/arm/boot/dts/tegra20-paz00.dts +3 -3
@@ -575,7 +575,7 @@ backlight: backlight { default-brightness-level = <10>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -612,7 +612,7 @@ panel: panel { backlight = <&backlight>; }; - p5valw_reg: regulator@0 { + p5valw_reg: regulator-5v0alw { compatible = "regulator-fixed"; regulator-name = "+5valw"; regulator-min-microvolt = <5000000>;
@@ -620,7 +620,7 @@ p5valw_reg: regulator@0 { regulator-always-on; }; - vdd_pnl_reg: regulator@1 { + vdd_pnl_reg: regulator-3v0 { compatible = "regulator-fixed"; regulator-name = "+3VS,vdd_pnl"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra20-plutux.dts +4 -4
@@ -60,7 +60,7 @@ sound { clock-names = "pll_a", "pll_a_out0", "mclk"; }; - vcc_24v_reg: regulator@100 { + vcc_24v_reg: regulator-24v0 { compatible = "regulator-fixed"; regulator-name = "vcc_24v"; regulator-min-microvolt = <24000000>;
@@ -68,7 +68,7 @@ vcc_24v_reg: regulator@100 { regulator-always-on; }; - vdd_5v0_reg: regulator@101 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; vin-supply = <&vcc_24v_reg>;
@@ -77,7 +77,7 @@ vdd_5v0_reg: regulator@101 { regulator-always-on; }; - vdd_3v3_reg: regulator@102 { + vdd_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@ vdd_3v3_reg: regulator@102 { regulator-always-on; }; - vdd_1v8_reg: regulator@103 { + vdd_1v8_reg: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8"; vin-supply = <&vdd_3v3_reg>;
arch/arm/boot/dts/tegra20-seaboard.dts +8 -8
@@ -792,7 +792,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -828,7 +828,7 @@ panel: panel { ddc-i2c-bus = <&lvds_ddc>; }; - vdd_5v0_reg: regulator@0 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -836,7 +836,7 @@ vdd_5v0_reg: regulator@0 { regulator-always-on; }; - regulator@1 { + regulator-1v5 { compatible = "regulator-fixed"; regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>;
@@ -844,7 +844,7 @@ regulator@1 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - regulator@2 { + regulator-1v2 { compatible = "regulator-fixed"; regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>;
@@ -853,7 +853,7 @@ regulator@2 { enable-active-high; }; - vbus_reg: regulator@3 { + vbus_reg: regulator-vbus { compatible = "regulator-fixed"; regulator-name = "vdd_vbus_wup1"; regulator-min-microvolt = <5000000>;
@@ -864,7 +864,7 @@ vbus_reg: regulator@3 { regulator-boot-on; }; - vdd_pnl_reg: regulator@4 { + vdd_pnl_reg: regulator-pnl { compatible = "regulator-fixed"; regulator-name = "vdd_pnl"; regulator-min-microvolt = <2800000>;
@@ -873,7 +873,7 @@ vdd_pnl_reg: regulator@4 { enable-active-high; }; - vdd_bl_reg: regulator@5 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <2800000>;
@@ -882,7 +882,7 @@ vdd_bl_reg: regulator@5 { enable-active-high; }; - vdd_hdmi: regulator@6 { + vdd_hdmi: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "VDDIO_HDMI"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra20-tamonten.dtsi +2 -2
@@ -502,13 +502,13 @@ mmc@c8000600 { status = "okay"; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>; }; - pci_vdd_reg: regulator@1 { + pci_vdd_reg: regulator-1v05 { compatible = "regulator-fixed"; regulator-name = "vdd_1v05"; regulator-min-microvolt = <1050000>;
arch/arm/boot/dts/tegra20-tec.dts +4 -4
@@ -69,7 +69,7 @@ sound { clock-names = "pll_a", "pll_a_out0", "mclk"; }; - vcc_24v_reg: regulator@100 { + vcc_24v_reg: regulator-24v { compatible = "regulator-fixed"; regulator-name = "vcc_24v"; regulator-min-microvolt = <24000000>;
@@ -77,7 +77,7 @@ vcc_24v_reg: regulator@100 { regulator-always-on; }; - vdd_5v0_reg: regulator@101 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@ vdd_5v0_reg: regulator@101 { regulator-always-on; }; - vdd_3v3_reg: regulator@102 { + vdd_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; vin-supply = <&vcc_24v_reg>;
@@ -95,7 +95,7 @@ vdd_3v3_reg: regulator@102 { regulator-always-on; }; - vdd_1v8_reg: regulator@103 { + vdd_1v8_reg: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8"; vin-supply = <&vdd_3v3_reg>;
arch/arm/boot/dts/tegra20-trimslice.dts +6 -6
@@ -379,7 +379,7 @@ mmc@c8000600 { bus-width = <4>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -401,7 +401,7 @@ poweroff { gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; }; - hdmi_vdd_reg: regulator@0 { + hdmi_vdd_reg: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "avdd_hdmi"; regulator-min-microvolt = <3300000>;
@@ -409,7 +409,7 @@ hdmi_vdd_reg: regulator@0 { regulator-always-on; }; - hdmi_pll_reg: regulator@1 { + hdmi_pll_reg: regulator-hdmipll { compatible = "regulator-fixed"; regulator-name = "avdd_hdmi_pll"; regulator-min-microvolt = <1800000>;
@@ -417,7 +417,7 @@ hdmi_pll_reg: regulator@1 { regulator-always-on; }; - vbus_reg: regulator@2 { + vbus_reg: regulator-vbus { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -428,7 +428,7 @@ vbus_reg: regulator@2 { regulator-boot-on; }; - pci_clk_reg: regulator@3 { + pci_clk_reg: regulator-pciclk { compatible = "regulator-fixed"; regulator-name = "pci_clk"; regulator-min-microvolt = <3300000>;
@@ -436,7 +436,7 @@ pci_clk_reg: regulator@3 { regulator-always-on; }; - pci_vdd_reg: regulator@4 { + pci_vdd_reg: regulator-pcivdd { compatible = "regulator-fixed"; regulator-name = "pci_vdd"; regulator-min-microvolt = <1050000>;
arch/arm/boot/dts/tegra20-ventana.dts +6 -6
@@ -606,7 +606,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -647,7 +647,7 @@ panel: panel { ddc-i2c-bus = <&lvds_ddc>; }; - vdd_5v0_reg: regulator@0 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -655,7 +655,7 @@ vdd_5v0_reg: regulator@0 { regulator-always-on; }; - regulator@1 { + regulator-1v5 { compatible = "regulator-fixed"; regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>;
@@ -663,7 +663,7 @@ regulator@1 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - regulator@2 { + regulator-1v2 { compatible = "regulator-fixed"; regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>;
@@ -672,7 +672,7 @@ regulator@2 { enable-active-high; }; - vdd_pnl_reg: regulator@3 { + vdd_pnl_reg: regulator-pnl { compatible = "regulator-fixed"; regulator-name = "vdd_pnl"; regulator-min-microvolt = <2800000>;
@@ -681,7 +681,7 @@ vdd_pnl_reg: regulator@3 { enable-active-high; }; - vdd_bl_reg: regulator@4 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <2800000>;
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +5 -5
@@ -1069,7 +1069,7 @@ battery_cell: battery-cell { }; /* PMIC has a built-in 32KHz oscillator which is used by PMC */ - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>;
@@ -1207,7 +1207,7 @@ lvds_encoder_output: endpoint { }; }; - vdd_5v0_sys: regulator@0 { + vdd_5v0_sys: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -1216,7 +1216,7 @@ vdd_5v0_sys: regulator@0 { regulator-boot-on; }; - vdd_3v3_sys: regulator@1 { + vdd_3v3_sys: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; regulator-min-microvolt = <3300000>;
@@ -1226,7 +1226,7 @@ vdd_3v3_sys: regulator@1 { vin-supply = <&vdd_5v0_sys>; }; - vdd_pnl: regulator@2 { + vdd_pnl: regulator-panel { compatible = "regulator-fixed"; regulator-name = "vdd_panel"; regulator-min-microvolt = <3300000>;
@@ -1237,7 +1237,7 @@ vdd_pnl: regulator@2 { vin-supply = <&vdd_3v3_sys>; }; - vcc_3v3_ts: regulator@3 { + vcc_3v3_ts: regulator-ts { compatible = "regulator-fixed"; regulator-name = "ldo_s-1167_3v3"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi +2 -2
@@ -166,12 +166,12 @@ ldo8 { }; }; - vdd_3v3_sys: regulator@1 { + vdd_3v3_sys: regulator-3v3 { gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; - regulator@4 { + regulator-usb { compatible = "regulator-fixed"; regulator-name = "avdd_usb"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi +1 -1
@@ -143,7 +143,7 @@ vdd_core: core-regulator@60 { }; }; - vdd_3v3_sys: regulator@1 { + vdd_3v3_sys: regulator-3v3 { gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; enable-active-high; };
arch/arm/boot/dts/tegra30-beaver.dts +10 -10
@@ -1966,7 +1966,7 @@ usb-phy@7d008000 { status = "okay"; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1985,7 +1985,7 @@ gpled2 { }; }; - vdd_5v_in_reg: regulator@0 { + vdd_5v_in_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v_in"; regulator-min-microvolt = <5000000>;
@@ -1993,7 +1993,7 @@ vdd_5v_in_reg: regulator@0 { regulator-always-on; }; - chargepump_5v_reg: regulator@1 { + chargepump_5v_reg: regulator-chargepump { compatible = "regulator-fixed"; regulator-name = "chargepump_5v"; regulator-min-microvolt = <5000000>;
@@ -2004,7 +2004,7 @@ chargepump_5v_reg: regulator@1 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - ddr_reg: regulator@2 { + ddr_reg: regulator-ddr { compatible = "regulator-fixed"; regulator-name = "vdd_ddr"; regulator-min-microvolt = <1500000>;
@@ -2016,7 +2016,7 @@ ddr_reg: regulator@2 { vin-supply = <&vdd_5v_in_reg>; }; - vdd_5v_sata_reg: regulator@3 { + vdd_5v_sata_reg: regulator-sata { compatible = "regulator-fixed"; regulator-name = "vdd_5v_sata"; regulator-min-microvolt = <5000000>;
@@ -2028,7 +2028,7 @@ vdd_5v_sata_reg: regulator@3 { vin-supply = <&vdd_5v_in_reg>; }; - usb1_vbus_reg: regulator@4 { + usb1_vbus_reg: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -2039,7 +2039,7 @@ usb1_vbus_reg: regulator@4 { vin-supply = <&vdd_5v_in_reg>; }; - usb3_vbus_reg: regulator@5 { + usb3_vbus_reg: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "usb3_vbus"; regulator-min-microvolt = <5000000>;
@@ -2050,7 +2050,7 @@ usb3_vbus_reg: regulator@5 { vin-supply = <&vdd_5v_in_reg>; }; - sys_3v3_reg: regulator@6 { + sys_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "sys_3v3,vdd_3v3_alw"; regulator-min-microvolt = <3300000>;
@@ -2062,7 +2062,7 @@ sys_3v3_reg: regulator@6 { vin-supply = <&vdd_5v_in_reg>; }; - sys_3v3_pexs_reg: regulator@7 { + sys_3v3_pexs_reg: regulator-pexs { compatible = "regulator-fixed"; regulator-name = "sys_3v3_pexs"; regulator-min-microvolt = <3300000>;
@@ -2074,7 +2074,7 @@ sys_3v3_pexs_reg: regulator@7 { vin-supply = <&sys_3v3_reg>; }; - vdd_5v0_hdmi: regulator@8 { + vdd_5v0_hdmi: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "+VDD_5V_HDMI"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra30-cardhu-a02.dts +6 -6
@@ -16,7 +16,7 @@ mmc@78000400 { keep-power-in-suspend; }; - ddr_reg: regulator@100 { + ddr_reg: regulator-ddr { compatible = "regulator-fixed"; regulator-name = "vdd_ddr"; regulator-min-microvolt = <1500000>;
@@ -27,7 +27,7 @@ ddr_reg: regulator@100 { gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; }; - sys_3v3_reg: regulator@101 { + sys_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "sys_3v3"; regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@ sys_3v3_reg: regulator@101 { gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; }; - usb1_vbus_reg: regulator@102 { + usb1_vbus_reg: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -49,7 +49,7 @@ usb1_vbus_reg: regulator@102 { vin-supply = <&vdd_5v0_reg>; }; - usb3_vbus_reg: regulator@103 { + usb3_vbus_reg: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "usb3_vbus"; regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@ usb3_vbus_reg: regulator@103 { vin-supply = <&vdd_5v0_reg>; }; - vdd_5v0_reg: regulator@104 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "5v0"; regulator-min-microvolt = <5000000>;
@@ -69,7 +69,7 @@ vdd_5v0_reg: regulator@104 { gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; }; - vdd_bl_reg: regulator@105 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra30-cardhu-a04.dts +7 -7
@@ -16,7 +16,7 @@ mmc@78000400 { keep-power-in-suspend; }; - ddr_reg: regulator@100 { + ddr_reg: regulator-ddr { compatible = "regulator-fixed"; regulator-name = "ddr"; regulator-min-microvolt = <1500000>;
@@ -27,7 +27,7 @@ ddr_reg: regulator@100 { gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; }; - sys_3v3_reg: regulator@101 { + sys_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "sys_3v3"; regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@ sys_3v3_reg: regulator@101 { gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; }; - usb1_vbus_reg: regulator@102 { + usb1_vbus_reg: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -49,7 +49,7 @@ usb1_vbus_reg: regulator@102 { vin-supply = <&vdd_5v0_reg>; }; - usb3_vbus_reg: regulator@103 { + usb3_vbus_reg: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "usb3_vbus"; regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@ usb3_vbus_reg: regulator@103 { vin-supply = <&vdd_5v0_reg>; }; - vdd_5v0_reg: regulator@104 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "5v0"; regulator-min-microvolt = <5000000>;
@@ -69,7 +69,7 @@ vdd_5v0_reg: regulator@104 { gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; }; - vdd_bl_reg: regulator@105 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <5000000>;
@@ -80,7 +80,7 @@ vdd_bl_reg: regulator@105 { gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; }; - vdd_bl2_reg: regulator@106 { + vdd_bl2_reg: regulator-bl2 { compatible = "regulator-fixed"; regulator-name = "vdd_bl2"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra30-cardhu.dtsi +14 -14
@@ -433,7 +433,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -475,7 +475,7 @@ panel: panel { backlight = <&backlight>; }; - vdd_ac_bat_reg: regulator@0 { + vdd_ac_bat_reg: regulator-acbat { compatible = "regulator-fixed"; regulator-name = "vdd_ac_bat"; regulator-min-microvolt = <5000000>;
@@ -483,7 +483,7 @@ vdd_ac_bat_reg: regulator@0 { regulator-always-on; }; - cam_1v8_reg: regulator@1 { + cam_1v8_reg: regulator-cam { compatible = "regulator-fixed"; regulator-name = "cam_1v8"; regulator-min-microvolt = <1800000>;
@@ -493,7 +493,7 @@ cam_1v8_reg: regulator@1 { vin-supply = <&vio_reg>; }; - cp_5v_reg: regulator@2 { + cp_5v_reg: regulator-5v0cp { compatible = "regulator-fixed"; regulator-name = "cp_5v"; regulator-min-microvolt = <5000000>;
@@ -504,7 +504,7 @@ cp_5v_reg: regulator@2 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - emmc_3v3_reg: regulator@3 { + emmc_3v3_reg: regulator-emmc { compatible = "regulator-fixed"; regulator-name = "emmc_3v3"; regulator-min-microvolt = <3300000>;
@@ -516,7 +516,7 @@ emmc_3v3_reg: regulator@3 { vin-supply = <&sys_3v3_reg>; }; - modem_3v3_reg: regulator@4 { + modem_3v3_reg: regulator-modem { compatible = "regulator-fixed"; regulator-name = "modem_3v3"; regulator-min-microvolt = <3300000>;
@@ -525,7 +525,7 @@ modem_3v3_reg: regulator@4 { gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; }; - pex_hvdd_3v3_reg: regulator@5 { + pex_hvdd_3v3_reg: regulator-pex { compatible = "regulator-fixed"; regulator-name = "pex_hvdd_3v3"; regulator-min-microvolt = <3300000>;
@@ -535,7 +535,7 @@ pex_hvdd_3v3_reg: regulator@5 { vin-supply = <&sys_3v3_reg>; }; - vdd_cam1_ldo_reg: regulator@6 { + vdd_cam1_ldo_reg: regulator-cam1 { compatible = "regulator-fixed"; regulator-name = "vdd_cam1_ldo"; regulator-min-microvolt = <2800000>;
@@ -545,7 +545,7 @@ vdd_cam1_ldo_reg: regulator@6 { vin-supply = <&sys_3v3_reg>; }; - vdd_cam2_ldo_reg: regulator@7 { + vdd_cam2_ldo_reg: regulator-cam2 { compatible = "regulator-fixed"; regulator-name = "vdd_cam2_ldo"; regulator-min-microvolt = <2800000>;
@@ -555,7 +555,7 @@ vdd_cam2_ldo_reg: regulator@7 { vin-supply = <&sys_3v3_reg>; }; - vdd_cam3_ldo_reg: regulator@8 { + vdd_cam3_ldo_reg: regulator-cam3 { compatible = "regulator-fixed"; regulator-name = "vdd_cam3_ldo"; regulator-min-microvolt = <3300000>;
@@ -565,7 +565,7 @@ vdd_cam3_ldo_reg: regulator@8 { vin-supply = <&sys_3v3_reg>; }; - vdd_com_reg: regulator@9 { + vdd_com_reg: regulator-com { compatible = "regulator-fixed"; regulator-name = "vdd_com"; regulator-min-microvolt = <3300000>;
@@ -577,7 +577,7 @@ vdd_com_reg: regulator@9 { vin-supply = <&sys_3v3_reg>; }; - vdd_fuse_3v3_reg: regulator@10 { + vdd_fuse_3v3_reg: regulator-fuse { compatible = "regulator-fixed"; regulator-name = "vdd_fuse_3v3"; regulator-min-microvolt = <3300000>;
@@ -587,7 +587,7 @@ vdd_fuse_3v3_reg: regulator@10 { vin-supply = <&sys_3v3_reg>; }; - vdd_pnl1_reg: regulator@11 { + vdd_pnl1_reg: regulator-pnl1 { compatible = "regulator-fixed"; regulator-name = "vdd_pnl1"; regulator-min-microvolt = <3300000>;
@@ -599,7 +599,7 @@ vdd_pnl1_reg: regulator@11 { vin-supply = <&sys_3v3_reg>; }; - vdd_vid_reg: regulator@12 { + vdd_vid_reg: regulator-vid { compatible = "regulator-fixed"; regulator-name = "vddio_vid"; regulator-min-microvolt = <5000000>;
Signature · 1 line
2.33.1
PATCH 13/14 ARM: tegra: nexus7: Drop clock-frequency from NFC node
In reply to Dmitry OsipenkoFrom: David Heidelberg <[email protected]>
The clock-frequency property was never used and is deprecated now. Remove it from Nexus 7 device-tree.
--- arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi | 1 - arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi | 2 -- 2 files changed, 3 deletions(-)
arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi +0 -1
@@ -137,7 +137,6 @@ i2c@7000c500 { nfc@28 { compatible = "nxp,pn544-i2c"; reg = <0x28>; - clock-frequency = <100000>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_EDGE_RISING>;
arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi +0 -2
@@ -223,8 +223,6 @@ nfc@2a { compatible = "nxp,pn544-i2c"; reg = <0x2a>; - clock-frequency = <100000>; - interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
Signature · 1 line
2.33.1
PATCH 14/14 ARM: tegra: Enable video decoder on Tegra114
In reply to Dmitry OsipenkoFrom: Anton Bambura <[email protected]>
Add Video Decoder Engine node to Tegra114 device-tree.
--- arch/arm/boot/dts/tegra114.dtsi | 38 +++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)
arch/arm/boot/dts/tegra114.dtsi +38 -0
@@ -17,6 +17,19 @@ memory@80000000 { reg = <0x80000000 0x0>; }; + sram@40000000 { + compatible = "mmio-sram"; + reg = <0x40000000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000000 0x40000>; + + vde_pool: sram@400 { + reg = <0x400 0x3fc00>; + pool; + }; + }; + host1x@50000000 { compatible = "nvidia,tegra114-host1x"; reg = <0x50000000 0x00028000>;
@@ -253,6 +266,30 @@ gpio: gpio@6000d000 { */ }; + vde@6001a000 { + compatible = "nvidia,tegra114-vde"; + reg = <0x6001a000 0x1000>, /* Syntax Engine */ + <0x6001b000 0x1000>, /* Video Bitstream Engine */ + <0x6001c000 0x100>, /* Macroblock Engine */ + <0x6001c200 0x100>, /* Post-processing Engine */ + <0x6001c400 0x100>, /* Motion Compensation Engine */ + <0x6001c600 0x100>, /* Transform Engine */ + <0x6001c800 0x100>, /* Pixel prediction block */ + <0x6001ca00 0x100>, /* Video DMA */ + <0x6001d800 0x400>; /* Video frame controls */ + reg-names = "sxe", "bsev", "mbe", "ppe", "mce", + "tfe", "ppb", "vdma", "frameid"; + iram = <&vde_pool>; /* IRAM region */ + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */ + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */ + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ + interrupt-names = "sync-token", "bsev", "sxe"; + clocks = <&tegra_car TEGRA114_CLK_VDE>; + reset-names = "vde", "mc"; + resets = <&tegra_car 61>, <&mc TEGRA114_MC_RESET_VDE>; + iommus = <&mc TEGRA_SWGROUP_VDE>; + }; + apbmisc@70000800 { compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc"; reg = <0x70000800 0x64>, /* Chip revision */
@@ -543,6 +580,7 @@ mc: memory-controller@70019000 { interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; + #reset-cells = <1>; }; ahub@70080000 {
Signature · 1 line
2.33.1