NVIDIA Tegra ARM32 device-tree patches for 5.17 (new devices and more)
Subsystems (3)
v3 cover NVIDIA Tegra ARM32 device-tree patches for 5.17 (new devices and more)
In this patchset you will find:
- New device-trees of ASUS Transformer and Pegatron Chagall tablets.
- New device-tree of Nyan Big Chromebook variant that has 1080p display panel.
- Enabled video decoder on Tegra114.
- Minor cleanup of Nexus7 device-tree.
- Renamed clocks and regulator nodes. I'm sending this patch second time because previously there was no good reason given about why not to apply it. Please apply it this time.
Changelog:
v3: - Maxim added couple "FIXME" comments to Transformer device-trees for
things that are yet missing on kernel side, and thus, can't be enabled in the DT for now.
- Maxim also found that v2 had a small problem in the patch which adds device-tree for Chagall tablet. Turned out I made a mistake during rebase of the patches and haven't noticed it, it's fixed now.
v2: - Svyatoslav and Maxim made couple corrections to regulators, comments
and default brightness of the device-trees.
- Added thermtrip node to transformers DT as we now have PMIC fix for it [1], it works properly now.
[1] https://patchwork.ozlabs.org/project/linux-tegra/patch/[email protected]/
- Changed sound card model names to make them per-device and consistent with the names that other Tegra DTs already use in upstream. This will prevent potential ABI breakages in the future if we will find that sound of some device needs extra differentiation.
Anton Bambura (3):
ARM: tegra: Add labels to tegra114.dtsi
ARM: tegra: Add device-tree for ASUS Transformer Pad TF701T
ARM: tegra: Enable video decoder on Tegra114
David Heidelberg (3):
dt-bindings: ARM: tegra: Document Pegatron Chagall
ARM: tegra: Name clock and regulator nodes according to DT-schema
ARM: tegra: nexus7: Drop clock-frequency from NFC node
Dmitry Osipenko (1):
ARM: tegra: Add device-tree for 1080p version of Nyan Big
Michał Mirosław (1):
ARM: tegra: Add device-tree for ASUS Transformer Pad TF300T
Nikola Milosavljevic (1):
ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101
Svyatoslav Ryhel (5):
dt-bindings: ARM: tegra: Document ASUS Transformers
ARM: tegra: Add device-tree for ASUS Transformer Prime TF201
ARM: tegra: Add device-tree for ASUS Transformer Pad TF300TG
ARM: tegra: Add device-tree for ASUS Transformer Infinity TF700T
ARM: tegra: Add device-tree for Pegatron Chagall tablet
.../devicetree/bindings/arm/tegra.yaml | 19 + arch/arm/boot/dts/Makefile | 10 +- arch/arm/boot/dts/tegra114-asus-tf701t.dts | 833 +++++ arch/arm/boot/dts/tegra114-dalmore.dts | 16 +- arch/arm/boot/dts/tegra114-roth.dts | 14 +- arch/arm/boot/dts/tegra114-tn7.dts | 8 +- arch/arm/boot/dts/tegra114.dtsi | 90 +- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 26 +- arch/arm/boot/dts/tegra124-nyan-big-fhd.dts | 11 + arch/arm/boot/dts/tegra124-nyan.dtsi | 28 +- arch/arm/boot/dts/tegra124-venice2.dts | 28 +- .../boot/dts/tegra20-acer-a500-picasso.dts | 12 +- arch/arm/boot/dts/tegra20-asus-tf101.dts | 1191 +++++++ arch/arm/boot/dts/tegra20-harmony.dts | 16 +- arch/arm/boot/dts/tegra20-medcom-wide.dts | 8 +- arch/arm/boot/dts/tegra20-paz00.dts | 6 +- arch/arm/boot/dts/tegra20-plutux.dts | 8 +- arch/arm/boot/dts/tegra20-seaboard.dts | 16 +- arch/arm/boot/dts/tegra20-tamonten.dtsi | 4 +- arch/arm/boot/dts/tegra20-tec.dts | 8 +- arch/arm/boot/dts/tegra20-trimslice.dts | 12 +- arch/arm/boot/dts/tegra20-ventana.dts | 12 +- .../boot/dts/tegra30-asus-lvds-display.dtsi | 46 + .../tegra30-asus-nexus7-grouper-common.dtsi | 10 +- ...egra30-asus-nexus7-grouper-maxim-pmic.dtsi | 4 +- .../tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 2 +- .../boot/dts/tegra30-asus-nexus7-grouper.dtsi | 1 - .../boot/dts/tegra30-asus-nexus7-tilapia.dtsi | 2 - arch/arm/boot/dts/tegra30-asus-tf201.dts | 623 ++++ arch/arm/boot/dts/tegra30-asus-tf300t.dts | 1030 ++++++ arch/arm/boot/dts/tegra30-asus-tf300tg.dts | 1072 +++++++ arch/arm/boot/dts/tegra30-asus-tf700t.dts | 807 +++++ .../dts/tegra30-asus-transformer-common.dtsi | 1741 ++++++++++ arch/arm/boot/dts/tegra30-beaver.dts | 20 +- arch/arm/boot/dts/tegra30-cardhu-a02.dts | 12 +- arch/arm/boot/dts/tegra30-cardhu-a04.dts | 14 +- arch/arm/boot/dts/tegra30-cardhu.dtsi | 28 +- .../arm/boot/dts/tegra30-pegatron-chagall.dts | 2807 +++++++++++++++++ 38 files changed, 10409 insertions(+), 186 deletions(-) create mode 100644 arch/arm/boot/dts/tegra114-asus-tf701t.dts create mode 100644 arch/arm/boot/dts/tegra124-nyan-big-fhd.dts create mode 100644 arch/arm/boot/dts/tegra20-asus-tf101.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi create mode 100644 arch/arm/boot/dts/tegra30-asus-tf201.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300t.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300tg.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-tf700t.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi create mode 100644 arch/arm/boot/dts/tegra30-pegatron-chagall.dts
Signature · 1 line
2.33.1
PATCH v3 1/14 dt-bindings: ARM: tegra: Document ASUS Transformers
From: Svyatoslav Ryhel <[email protected]>
Document Tegra20/30/114-based ASUS Transformer Series tablet devices. This group includes EeePad TF101, Prime TF201, Pad TF300T, TF300TG Infinity TF700T, TF701T.
--- Documentation/devicetree/bindings/arm/tegra.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
Documentation/devicetree/bindings/arm/tegra.yaml +16 -0
@@ -36,6 +36,9 @@ properties: - toradex,colibri_t20-iris - const: toradex,colibri_t20 - const: nvidia,tegra20 + - items: + - const: asus,tf101 + - const: nvidia,tegra20 - items: - const: acer,picasso - const: nvidia,tegra20
@@ -49,6 +52,18 @@ properties: - nvidia,cardhu-a04 - const: nvidia,cardhu - const: nvidia,tegra30 + - items: + - const: asus,tf201 + - const: nvidia,tegra30 + - items: + - const: asus,tf300t + - const: nvidia,tegra30 + - items: + - const: asus,tf300tg + - const: nvidia,tegra30 + - items: + - const: asus,tf700t + - const: nvidia,tegra30 - items: - const: toradex,apalis_t30-eval - const: toradex,apalis_t30
@@ -76,6 +91,7 @@ properties: - const: nvidia,tegra30 - items: - enum: + - asus,tf701t - nvidia,dalmore - nvidia,roth - nvidia,tn7
Signature · 1 line
2.33.1
Re: [PATCH v3 01/14] dt-bindings: ARM: tegra: Document ASUS Transformers
Quoted 6 lines · Dmitry Osipenko
From: Svyatoslav Ryhel <[email protected]>
Document Tegra20/30/114-based ASUS Transformer Series tablet devices. This group includes EeePad TF101, Prime TF201, Pad TF300T, TF300TG Infinity TF700T, TF701T.
Quoted 8 lines
Signed-off-by David Heidelberg <[email protected]>Signed-off-by Anton Bambura <[email protected]>Signed-off-by Svyatoslav Ryhel <[email protected]>Signed-off-by Dmitry Osipenko <[email protected]>--- Documentation/devicetree/bindings/arm/tegra.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
PATCH v3 2/14 dt-bindings: ARM: tegra: Document Pegatron Chagall
In reply to Dmitry OsipenkoFrom: David Heidelberg <[email protected]>
Document Pegatron Chagall, which is Tegra30-based tablet device.
--- Documentation/devicetree/bindings/arm/tegra.yaml | 3 +++ 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/arm/tegra.yaml +3 -0
@@ -89,6 +89,9 @@ properties: - items: - const: ouya,ouya - const: nvidia,tegra30 + - items: + - const: pegatron,chagall + - const: nvidia,tegra30 - items: - enum: - asus,tf701t
Signature · 1 line
2.33.1
Re: [PATCH v3 02/14] dt-bindings: ARM: tegra: Document Pegatron Chagall
Quoted 9 lines · Dmitry Osipenko
From: David Heidelberg <[email protected]>
Document Pegatron Chagall, which is Tegra30-based tablet device.
Signed-off-by David Heidelberg <[email protected]>--- Documentation/devicetree/bindings/arm/tegra.yaml | 3 +++ 1 file changed, 3 insertions(+)
PATCH v3 3/14 ARM: tegra: Add labels to tegra114.dtsi
In reply to Dmitry OsipenkoFrom: Anton Bambura <[email protected]>
Add more labels in order to use label reference in device-specific dts files. Labels make device-trees more readable and prevent typos that are difficult to notice.
--- arch/arm/boot/dts/tegra114.dtsi | 52 ++++++++++++++++----------------- 1 file changed, 26 insertions(+), 26 deletions(-)
arch/arm/boot/dts/tegra114.dtsi +26 -26
@@ -93,7 +93,7 @@ rgb { }; }; - hdmi@54280000 { + hdmi: hdmi@54280000 { compatible = "nvidia,tegra114-hdmi"; reg = <0x54280000 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -105,7 +105,7 @@ hdmi@54280000 { status = "disabled"; }; - dsi@54300000 { + dsia: dsi@54300000 { compatible = "nvidia,tegra114-dsi"; reg = <0x54300000 0x00040000>; clocks = <&tegra_car TEGRA114_CLK_DSIA>,
@@ -121,7 +121,7 @@ dsi@54300000 { #size-cells = <0>; }; - dsi@54400000 { + dsib: dsi@54400000 { compatible = "nvidia,tegra114-dsi"; reg = <0x54400000 0x00040000>; clocks = <&tegra_car TEGRA114_CLK_DSIB>,
@@ -335,7 +335,7 @@ pwm: pwm@7000a000 { status = "disabled"; }; - i2c@7000c000 { + i2c1: i2c@7000c000 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c000 0x100>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -350,7 +350,7 @@ i2c@7000c000 { status = "disabled"; }; - i2c@7000c400 { + i2c2: i2c@7000c400 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c400 0x100>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -365,7 +365,7 @@ i2c@7000c400 { status = "disabled"; }; - i2c@7000c500 { + i2c3: i2c@7000c500 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c500 0x100>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -380,7 +380,7 @@ i2c@7000c500 { status = "disabled"; }; - i2c@7000c700 { + i2c4: i2c@7000c700 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000c700 0x100>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -395,7 +395,7 @@ i2c@7000c700 { status = "disabled"; }; - i2c@7000d000 { + i2c5: i2c@7000d000 { compatible = "nvidia,tegra114-i2c"; reg = <0x7000d000 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -410,7 +410,7 @@ i2c@7000d000 { status = "disabled"; }; - spi@7000d400 { + spi1: spi@7000d400 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d400 0x200>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
@@ -425,7 +425,7 @@ spi@7000d400 { status = "disabled"; }; - spi@7000d600 { + spi2: spi@7000d600 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d600 0x200>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -440,7 +440,7 @@ spi@7000d600 { status = "disabled"; }; - spi@7000d800 { + spi3: spi@7000d800 { compatible = "nvidia,tegra114-spi"; reg = <0x7000d800 0x200>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -455,7 +455,7 @@ spi@7000d800 { status = "disabled"; }; - spi@7000da00 { + spi4: spi@7000da00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000da00 0x200>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -470,7 +470,7 @@ spi@7000da00 { status = "disabled"; }; - spi@7000dc00 { + spi5: spi@7000dc00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000dc00 0x200>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
@@ -485,7 +485,7 @@ spi@7000dc00 { status = "disabled"; }; - spi@7000de00 { + spi6: spi@7000de00 { compatible = "nvidia,tegra114-spi"; reg = <0x7000de00 0x200>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -500,14 +500,14 @@ spi@7000de00 { status = "disabled"; }; - rtc@7000e000 { + tegra_rtc: rtc@7000e000 { compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA114_CLK_RTC>; }; - kbc@7000e200 { + tegra_kbc: kbc@7000e200 { compatible = "nvidia,tegra114-kbc"; reg = <0x7000e200 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -646,7 +646,7 @@ mipi: mipi@700e3000 { #nvidia,mipi-calibrate-cells = <1>; }; - mmc@78000000 { + sdmmc1: mmc@78000000 { compatible = "nvidia,tegra114-sdhci"; reg = <0x78000000 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -657,7 +657,7 @@ mmc@78000000 { status = "disabled"; }; - mmc@78000200 { + sdmmc2: mmc@78000200 { compatible = "nvidia,tegra114-sdhci"; reg = <0x78000200 0x200>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -668,7 +668,7 @@ mmc@78000200 { status = "disabled"; }; - mmc@78000400 { + sdmmc3: mmc@78000400 { compatible = "nvidia,tegra114-sdhci"; reg = <0x78000400 0x200>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -679,7 +679,7 @@ mmc@78000400 { status = "disabled"; }; - mmc@78000600 { + sdmmc4: mmc@78000600 { compatible = "nvidia,tegra114-sdhci"; reg = <0x78000600 0x200>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -690,7 +690,7 @@ mmc@78000600 { status = "disabled"; }; - usb@7d000000 { + usb1: usb@7d000000 { compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci"; reg = <0x7d000000 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -698,11 +698,11 @@ usb@7d000000 { clocks = <&tegra_car TEGRA114_CLK_USBD>; resets = <&tegra_car 22>; reset-names = "usb"; - nvidia,phy = <&phy1>; + nvidia,phy = <&usb1_phy>; status = "disabled"; }; - phy1: usb-phy@7d000000 { + usb1_phy: usb-phy@7d000000 { compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x7d000000 0x4000>, <0x7d000000 0x4000>;
@@ -730,7 +730,7 @@ phy1: usb-phy@7d000000 { status = "disabled"; }; - usb@7d008000 { + usb3: usb@7d008000 { compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci"; reg = <0x7d008000 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -738,11 +738,11 @@ usb@7d008000 { clocks = <&tegra_car TEGRA114_CLK_USB3>; resets = <&tegra_car 59>; reset-names = "usb"; - nvidia,phy = <&phy3>; + nvidia,phy = <&usb3_phy>; status = "disabled"; }; - phy3: usb-phy@7d008000 { + usb3_phy: usb-phy@7d008000 { compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x7d008000 0x4000>, <0x7d000000 0x4000>;
Signature · 1 line
2.33.1
Re: [PATCH v3 03/14] ARM: tegra: Add labels to tegra114.dtsi
Quoted 5 lines · Dmitry Osipenko
From: Anton Bambura <[email protected]>
Add more labels in order to use label reference in device-specific dts files. Labels make device-trees more readable and prevent typos that are difficult to notice.
I believe that you had also a similar patch for Tegra3 (or my [1]). Could you pull it into this series to make the DT's easier to manage?
[1] https://rere.qmqm.pl/git/?p=linux;a=commitdiff;h=2c3341163b07d94d209680a22286608d0e4d711a
Best Regards
Michał Mirosław
Re: [PATCH v3 03/14] ARM: tegra: Add labels to tegra114.dtsi
28.11.2021 04:32, Michał Mirosław пишет:
Quoted 11 lines · Dmitry Osipenko
Quoted 5 lines
From: Anton Bambura <[email protected]>
Add more labels in order to use label reference in device-specific dts files. Labels make device-trees more readable and prevent typos that are difficult to notice.
I believe that you had also a similar patch for Tegra3 (or my [1]). Could you pull it into this series to make the DT's easier to manage?
[1] https://rere.qmqm.pl/git/?p=linux;a=commitdiff;h=2c3341163b07d94d209680a22286608d0e4d711a
I had a thought about including it in to this series, but we don't have a user for that patch right now, so I decided not to include it.
I'll reconsider to include it into v4, now that you're asking about it. It won't hurt to have that patch, but I really would want somebody to add a similar patch for T20 and then convert all DTs to use those labels uniformly, this will take some time and effort to type these patches.
PATCH v3 4/14 ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101
In reply to Dmitry OsipenkoFrom: Nikola Milosavljevic <[email protected]>
Add device-tree for Tegra20-based ASUS Transformer EeePad TF101.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra20-asus-tf101.dts | 1191 ++++++++++++++++++++++ 2 files changed, 1192 insertions(+) create mode 100644 arch/arm/boot/dts/tegra20-asus-tf101.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1304,6 +1304,7 @@ dtb-$(CONFIG_MACH_SUNIV) += \ suniv-f1c100s-licheepi-nano.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-acer-a500-picasso.dtb \ + tegra20-asus-tf101.dtb \ tegra20-harmony.dtb \ tegra20-colibri-eval-v3.dtb \ tegra20-colibri-iris.dtb \
arch/arm/boot/dts/tegra20-asus-tf101.dts new file +1191 -0
1,191 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH v3 5/14 ARM: tegra: Add device-tree for ASUS Transformer Prime TF201
In reply to Dmitry OsipenkoFrom: Svyatoslav Ryhel <[email protected]>
Add device-tree for ASUS Transformer Prime TF201, which is NVIDIA Tegra30-based tablet device.
--- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/tegra30-asus-lvds-display.dtsi | 46 + arch/arm/boot/dts/tegra30-asus-tf201.dts | 623 ++++++ .../dts/tegra30-asus-transformer-common.dtsi | 1741 +++++++++++++++++ 4 files changed, 2411 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi create mode 100644 arch/arm/boot/dts/tegra30-asus-tf201.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
arch/arm/boot/dts/Makefile +1 -0
@@ -1321,6 +1321,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-asus-nexus7-grouper-PM269.dtb \ tegra30-asus-nexus7-grouper-E1565.dtb \ tegra30-asus-nexus7-tilapia-E1565.dtb \ + tegra30-asus-tf201.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi new file +46 -0
46 lines not on this page · raw message
arch/arm/boot/dts/tegra30-asus-tf201.dts new file +623 -0
623 lines not on this page · raw message
arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi new file +1741 -0
1,741 lines not on this page · raw message
Signature · 1 line
2.33.1
Re: [PATCH v3 05/14] ARM: tegra: Add device-tree for ASUS Transformer Prime TF201
Quoted 10 lines · Dmitry Osipenko
From: Svyatoslav Ryhel <[email protected]>
Add device-tree for ASUS Transformer Prime TF201, which is NVIDIA Tegra30-based tablet device.
Co-developed-by Ion Agorria <[email protected]>Signed-off-by Ion Agorria <[email protected]>Co-developed-by Maxim Schwalm <[email protected]>Signed-off-by Maxim Schwalm <[email protected]>Signed-off-by Svyatoslav Ryhel <[email protected]>
Quoted 9 lines
--- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/tegra30-asus-lvds-display.dtsi | 46 + arch/arm/boot/dts/tegra30-asus-tf201.dts | 623 ++++++ .../dts/tegra30-asus-transformer-common.dtsi | 1741 +++++++++++++++++ 4 files changed, 2411 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi create mode 100644 arch/arm/boot/dts/tegra30-asus-tf201.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
I think the common.dtsi is combined from all the DT authors, so they all should be mentioned in the co-developed/signed-off lines. (Or maybe just split the common part out if you want to be more specific in assigning credits?)
Quoted 3 lines
arch/arm/boot/dts/tegra30-asus-tf201.dts new file +3
-0+ i2c@7000c400 { + /* Atmel MXT768E touchscreen */ + touchscreen@4d {
[...]
arch/arm/boot/dts/tegra30-asus-tf201.dts line 66
Quoted 2 lines
arch/arm/boot/dts/tegra30-asus-tf201.dts new file +2
-0+ interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
[...]
Nit: This could use 'interrupts-extended' as it's more readable, I think. (There are similar cases in other DTs.)
Review
Quoted 2 lines
(quoted diff) +2
-0+ uartb: serial@70006040 { + compatible = "nvidia,tegra30-hsuart";
[...]
I wonder why isn't this in the tegra30.dtsi? The DT shouldn't select a driver - it should only describe the hardware.
Best Regards
Michał Mirosław
Re: [PATCH v3 05/14] ARM: tegra: Add device-tree for ASUS Transformer Prime TF201
28.11.2021 04:51, Michał Mirosław пишет:
Quoted 21 lines · Dmitry Osipenko
Quoted 10 lines
From: Svyatoslav Ryhel <[email protected]>
Add device-tree for ASUS Transformer Prime TF201, which is NVIDIA Tegra30-based tablet device.
Co-developed-by Ion Agorria <[email protected]>Signed-off-by Ion Agorria <[email protected]>Co-developed-by Maxim Schwalm <[email protected]>Signed-off-by Maxim Schwalm <[email protected]>Signed-off-by Svyatoslav Ryhel <[email protected]>Quoted 9 lines
--- arch/arm/boot/dts/Makefile | 1 + .../boot/dts/tegra30-asus-lvds-display.dtsi | 46 + arch/arm/boot/dts/tegra30-asus-tf201.dts | 623 ++++++ .../dts/tegra30-asus-transformer-common.dtsi | 1741 +++++++++++++++++ 4 files changed, 2411 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-lvds-display.dtsi create mode 100644 arch/arm/boot/dts/tegra30-asus-tf201.dts create mode 100644 arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
Quoted 4 lines
I think the
common.dtsiis combined from all the DT authors, so they all should be mentioned in the co-developed/signed-off lines. (Or maybe just split the common part out if you want to be more specific in assigning credits?)
I'll factor out the common part into separate patch and will make you the author of that patch since it really was derived from yours original TF300T DT. I actually wanted to do that previously, it's good that you reminded about it.
Quoted 10 lines
Quoted 3 lines
arch/arm/boot/dts/tegra30-asus-tf201.dts new file +3
-0+ i2c@7000c400 { + /* Atmel MXT768E touchscreen */ + touchscreen@4d {[...]
arch/arm/boot/dts/tegra30-asus-tf201.dts line 66
Quoted 2 lines
arch/arm/boot/dts/tegra30-asus-tf201.dts new file +2
-0+ interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;[...]
Nit: This could use 'interrupts-extended' as it's more readable, I think. (There are similar cases in other DTs.)
I don't have objections, although the classic variant is also good to me.
I don't think that it makes sense to change only the Transformer DTs to use 'interrupts-extended'. I'd suggest to create a followup patches that will cleanup and improve all Tegra device-trees together, making them all more uniform and nicer to look.
Quoted 6 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ uartb: serial@70006040 { + compatible = "nvidia,tegra30-hsuart";[...]
I wonder why isn't this in the
tegra30.dtsi? The DT shouldn't select a driver - it should only describe the hardware.
The "nvidia,tegra30-hsuart" implies that UART port is capable of performing the high speed transfers, which should be board dependent. Meanwhile "nvidia,tegra30-uart" should work for all hardware variants. That's how I understand it.
The comment in the Tegra dtsi really shouldn't refer to the drivers. Changing that comment should be material for a separate patch. It could become a part of the DT cleanup patches together with the 'interrupts-extended' changes.
PATCH v3 6/14 ARM: tegra: Add device-tree for ASUS Transformer Pad TF300T
In reply to Dmitry OsipenkoFrom: Michał Mirosław <[email protected]>
Add device-tree for ASUS Transformer Pad TF300T, which is NVIDIA Tegra30-based tablet device.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra30-asus-tf300t.dts | 1030 +++++++++++++++++++++ 2 files changed, 1031 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300t.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1322,6 +1322,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-asus-nexus7-grouper-E1565.dtb \ tegra30-asus-nexus7-tilapia-E1565.dtb \ tegra30-asus-tf201.dtb \ + tegra30-asus-tf300t.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf300t.dts new file +1030 -0
1,030 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH v3 7/14 ARM: tegra: Add device-tree for ASUS Transformer Pad TF300TG
In reply to Dmitry OsipenkoFrom: Svyatoslav Ryhel <[email protected]>
Add device-tree for ASUS Transformer Pad TF300TG, which is NVIDIA Tegra30-based tablet device, a variant of TF300T that has 3g modem.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra30-asus-tf300tg.dts | 1072 ++++++++++++++++++++ 2 files changed, 1073 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-tf300tg.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1323,6 +1323,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-asus-nexus7-tilapia-E1565.dtb \ tegra30-asus-tf201.dtb \ tegra30-asus-tf300t.dtb \ + tegra30-asus-tf300tg.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf300tg.dts new file +1072 -0
1,072 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH v3 8/14 ARM: tegra: Add device-tree for ASUS Transformer Infinity TF700T
In reply to Dmitry OsipenkoFrom: Svyatoslav Ryhel <[email protected]>
Add device-tree for ASUS Transformer Infinity TF700T, which is NVIDIA Tegra30-based tablet device.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra30-asus-tf700t.dts | 807 ++++++++++++++++++++++ 2 files changed, 808 insertions(+) create mode 100644 arch/arm/boot/dts/tegra30-asus-tf700t.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1324,6 +1324,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-asus-tf201.dtb \ tegra30-asus-tf300t.dtb \ tegra30-asus-tf300tg.dtb \ + tegra30-asus-tf700t.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \
arch/arm/boot/dts/tegra30-asus-tf700t.dts new file +807 -0
807 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH v3 9/14 ARM: tegra: Add device-tree for ASUS Transformer Pad TF701T
In reply to Dmitry OsipenkoFrom: Anton Bambura <[email protected]>
Add device-tree for Tegra114-based ASUS Transformer Pad TF701T (K00C) tablet.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra114-asus-tf701t.dts | 833 +++++++++++++++++++++ 2 files changed, 834 insertions(+) create mode 100644 arch/arm/boot/dts/tegra114-asus-tf701t.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1331,6 +1331,7 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-colibri-eval-v3.dtb \ tegra30-ouya.dtb dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ + tegra114-asus-tf701t.dtb \ tegra114-dalmore.dtb \ tegra114-roth.dtb \ tegra114-tn7.dtb
arch/arm/boot/dts/tegra114-asus-tf701t.dts new file +833 -0
833 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH v3 10/14 ARM: tegra: Add device-tree for Pegatron Chagall tablet
In reply to Dmitry OsipenkoFrom: Svyatoslav Ryhel <[email protected]>
Add device-tree for Pegatron Chagall, which is NVIDIA Tegra30-based Android tablet.
--- arch/arm/boot/dts/Makefile | 3 +- .../arm/boot/dts/tegra30-pegatron-chagall.dts | 2807 +++++++++++++++++ 2 files changed, 2809 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/tegra30-pegatron-chagall.dts
arch/arm/boot/dts/Makefile +2 -1
@@ -1329,7 +1329,8 @@ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ tegra30-colibri-eval-v3.dtb \ - tegra30-ouya.dtb + tegra30-ouya.dtb \ + tegra30-pegatron-chagall.dtb dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ tegra114-asus-tf701t.dtb \ tegra114-dalmore.dtb \
arch/arm/boot/dts/tegra30-pegatron-chagall.dts new file +2807 -0
2,807 lines not on this page · raw message
Signature · 1 line
2.33.1
PATCH v3 11/14 ARM: tegra: Add device-tree for 1080p version of Nyan Big
In reply to Dmitry OsipenkoAdd dedicated device-tree for 1080p version of Nyan Big in order to describe display panel properly. FHD panel doesn't support modes other than 1080p, hence it's wrong to use incompatible lower resolution panel in device-tree.
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/tegra124-nyan-big-fhd.dts | 11 +++++++++++ 2 files changed, 12 insertions(+) create mode 100644 arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1341,6 +1341,7 @@ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \ tegra124-apalis-v1.2-eval.dtb \ tegra124-jetson-tk1.dtb \ tegra124-nyan-big.dtb \ + tegra124-nyan-big-fhd.dtb \ tegra124-nyan-blaze.dtb \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_U8500) += \
arch/arm/boot/dts/tegra124-nyan-big-fhd.dts new file +11 -0
@@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra124-nyan-big.dts" + +/ { + /* Version of Nyan Big with 1080p panel */ + panel { + compatible = "auo,b133htn01"; + }; +};
Signature · 1 line
2.33.1
PATCH v3 12/14 ARM: tegra: Name clock and regulator nodes according to DT-schema
In reply to Dmitry OsipenkoFrom: David Heidelberg <[email protected]>
Name clocks and regulators according to DT-schema to fix warnings such as:
arch/arm/boot/dts/tegra20-acer-a500-picasso.dt.yaml: /: clock@0: 'anyOf' conditional failed, one must be fixed:
'reg' is a required property
'ranges' is a required property
From schema: /home/runner/.local/lib/python3.8/site-packages/dtschema/schemas/root-node.yaml
--- arch/arm/boot/dts/tegra114-dalmore.dts | 16 +++++------ arch/arm/boot/dts/tegra114-roth.dts | 14 +++++----- arch/arm/boot/dts/tegra114-tn7.dts | 8 +++--- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 26 ++++++++--------- arch/arm/boot/dts/tegra124-nyan.dtsi | 28 +++++++++---------- arch/arm/boot/dts/tegra124-venice2.dts | 28 +++++++++---------- .../boot/dts/tegra20-acer-a500-picasso.dts | 12 ++++---- arch/arm/boot/dts/tegra20-harmony.dts | 16 +++++------ arch/arm/boot/dts/tegra20-medcom-wide.dts | 8 +++--- arch/arm/boot/dts/tegra20-paz00.dts | 6 ++-- arch/arm/boot/dts/tegra20-plutux.dts | 8 +++--- arch/arm/boot/dts/tegra20-seaboard.dts | 16 +++++------ arch/arm/boot/dts/tegra20-tamonten.dtsi | 4 +-- arch/arm/boot/dts/tegra20-tec.dts | 8 +++--- arch/arm/boot/dts/tegra20-trimslice.dts | 12 ++++---- arch/arm/boot/dts/tegra20-ventana.dts | 12 ++++---- .../tegra30-asus-nexus7-grouper-common.dtsi | 10 +++---- ...egra30-asus-nexus7-grouper-maxim-pmic.dtsi | 4 +-- .../tegra30-asus-nexus7-grouper-ti-pmic.dtsi | 2 +- arch/arm/boot/dts/tegra30-beaver.dts | 20 ++++++------- arch/arm/boot/dts/tegra30-cardhu-a02.dts | 12 ++++---- arch/arm/boot/dts/tegra30-cardhu-a04.dts | 14 +++++----- arch/arm/boot/dts/tegra30-cardhu.dtsi | 28 +++++++++---------- 23 files changed, 156 insertions(+), 156 deletions(-)
arch/arm/boot/dts/tegra114-dalmore.dts +8 -8
@@ -1151,7 +1151,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1186,7 +1186,7 @@ volume_up { }; }; - vdd_ac_bat_reg: regulator@0 { + vdd_ac_bat_reg: regulator-acbat { compatible = "regulator-fixed"; regulator-name = "vdd_ac_bat"; regulator-min-microvolt = <5000000>;
@@ -1194,7 +1194,7 @@ vdd_ac_bat_reg: regulator@0 { regulator-always-on; }; - dvdd_ts_reg: regulator@1 { + dvdd_ts_reg: regulator-ts { compatible = "regulator-fixed"; regulator-name = "dvdd_ts"; regulator-min-microvolt = <1800000>;
@@ -1203,7 +1203,7 @@ dvdd_ts_reg: regulator@1 { gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; }; - usb1_vbus_reg: regulator@3 { + usb1_vbus_reg: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -1214,7 +1214,7 @@ usb1_vbus_reg: regulator@3 { vin-supply = <&tps65090_dcdc1_reg>; }; - usb3_vbus_reg: regulator@4 { + usb3_vbus_reg: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "usb2_vbus"; regulator-min-microvolt = <5000000>;
@@ -1225,7 +1225,7 @@ usb3_vbus_reg: regulator@4 { vin-supply = <&tps65090_dcdc1_reg>; }; - vdd_hdmi_reg: regulator@5 { + vdd_hdmi_reg: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "vdd_hdmi_5v0"; regulator-min-microvolt = <5000000>;
@@ -1233,7 +1233,7 @@ vdd_hdmi_reg: regulator@5 { vin-supply = <&tps65090_dcdc1_reg>; }; - vdd_cam_1v8_reg: regulator@6 { + vdd_cam_1v8_reg: regulator-cam { compatible = "regulator-fixed"; regulator-name = "vdd_cam_1v8_reg"; regulator-min-microvolt = <1800000>;
@@ -1242,7 +1242,7 @@ vdd_cam_1v8_reg: regulator@6 { gpio = <&palmas_gpio 6 0>; }; - vdd_5v0_hdmi: regulator@7 { + vdd_5v0_hdmi: regulator-hdmicon { compatible = "regulator-fixed"; regulator-name = "VDD_5V0_HDMI_CON"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra114-roth.dts +7 -7
@@ -1016,7 +1016,7 @@ backlight: backlight { enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1045,7 +1045,7 @@ power { }; }; - lcd_bl_en: regulator@0 { + lcd_bl_en: regulator-lcden { compatible = "regulator-fixed"; regulator-name = "lcd_bl_en"; regulator-min-microvolt = <5000000>;
@@ -1053,7 +1053,7 @@ lcd_bl_en: regulator@0 { regulator-boot-on; }; - vdd_lcd: regulator@1 { + vdd_lcd: regulator-lcd { compatible = "regulator-fixed"; regulator-name = "vdd_lcd_1v8"; regulator-min-microvolt = <1800000>;
@@ -1064,7 +1064,7 @@ vdd_lcd: regulator@1 { regulator-boot-on; }; - regulator@2 { + regulator-1v8ts { compatible = "regulator-fixed"; regulator-name = "vdd_1v8_ts"; regulator-min-microvolt = <1800000>;
@@ -1073,7 +1073,7 @@ regulator@2 { regulator-boot-on; }; - regulator@3 { + regulator-3v3ts { compatible = "regulator-fixed"; regulator-name = "vdd_3v3_ts"; regulator-min-microvolt = <3300000>;
@@ -1083,7 +1083,7 @@ regulator@3 { regulator-boot-on; }; - regulator@4 { + regulator-1v8com { compatible = "regulator-fixed"; regulator-name = "vdd_1v8_com"; regulator-min-microvolt = <1800000>;
@@ -1094,7 +1094,7 @@ regulator@4 { regulator-boot-on; }; - regulator@5 { + regulator-3v3com { compatible = "regulator-fixed"; regulator-name = "vdd_3v3_com"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra114-tn7.dts +4 -4
@@ -273,7 +273,7 @@ backlight: backlight { power-supply = <&lcd_bl_en>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -303,7 +303,7 @@ volume_up { }; /* FIXME: output of BQ24192 */ - vs_sys: regulator@0 { + vs_sys: regulator-vs { compatible = "regulator-fixed"; regulator-name = "VS_SYS"; regulator-min-microvolt = <4200000>;
@@ -312,7 +312,7 @@ vs_sys: regulator@0 { regulator-boot-on; }; - lcd_bl_en: regulator@1 { + lcd_bl_en: regulator-lcden { compatible = "regulator-fixed"; regulator-name = "VDD_LCD_BL"; regulator-min-microvolt = <16500000>;
@@ -323,7 +323,7 @@ lcd_bl_en: regulator@1 { regulator-boot-on; }; - vdd_lcd: regulator@2 { + vdd_lcd: regulator-lcd { compatible = "regulator-fixed"; regulator-name = "VD_LCD_1V8"; regulator-min-microvolt = <1800000>;
arch/arm/boot/dts/tegra124-jetson-tk1.dts +13 -13
@@ -1868,7 +1868,7 @@ usb-phy@7d008000 { vbus-supply = <&vdd_usb3_vbus>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1892,7 +1892,7 @@ power { }; }; - vdd_mux: regulator@0 { + vdd_mux: regulator-mux { compatible = "regulator-fixed"; regulator-name = "+VDD_MUX"; regulator-min-microvolt = <12000000>;
@@ -1901,7 +1901,7 @@ vdd_mux: regulator@0 { regulator-boot-on; }; - vdd_5v0_sys: regulator@1 { + vdd_5v0_sys: regulator-5v0sys { compatible = "regulator-fixed"; regulator-name = "+5V_SYS"; regulator-min-microvolt = <5000000>;
@@ -1911,7 +1911,7 @@ vdd_5v0_sys: regulator@1 { vin-supply = <&vdd_mux>; }; - vdd_3v3_sys: regulator@2 { + vdd_3v3_sys: regulator-3v3sys { compatible = "regulator-fixed"; regulator-name = "+3.3V_SYS"; regulator-min-microvolt = <3300000>;
@@ -1921,7 +1921,7 @@ vdd_3v3_sys: regulator@2 { vin-supply = <&vdd_mux>; }; - vdd_3v3_run: regulator@3 { + vdd_3v3_run: regulator-3v3run { compatible = "regulator-fixed"; regulator-name = "+3.3V_RUN"; regulator-min-microvolt = <3300000>;
@@ -1933,7 +1933,7 @@ vdd_3v3_run: regulator@3 { vin-supply = <&vdd_3v3_sys>; }; - vdd_3v3_hdmi: regulator@4 { + vdd_3v3_hdmi: regulator-3v3hdmi { compatible = "regulator-fixed"; regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; regulator-min-microvolt = <3300000>;
@@ -1941,7 +1941,7 @@ vdd_3v3_hdmi: regulator@4 { vin-supply = <&vdd_3v3_run>; }; - vdd_usb1_vbus: regulator@5 { + vdd_usb1_vbus: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "+USB0_VBUS_SW"; regulator-min-microvolt = <5000000>;
@@ -1952,7 +1952,7 @@ vdd_usb1_vbus: regulator@5 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb3_vbus: regulator@6 { + vdd_usb3_vbus: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_HS"; regulator-min-microvolt = <5000000>;
@@ -1963,7 +1963,7 @@ vdd_usb3_vbus: regulator@6 { vin-supply = <&vdd_5v0_sys>; }; - vdd_3v3_lp0: regulator@7 { + vdd_3v3_lp0: regulator-lp0 { compatible = "regulator-fixed"; regulator-name = "+3.3V_LP0"; regulator-min-microvolt = <3300000>;
@@ -1975,7 +1975,7 @@ vdd_3v3_lp0: regulator@7 { vin-supply = <&vdd_3v3_sys>; }; - vdd_hdmi_pll: regulator@8 { + vdd_hdmi_pll: regulator-hdmipll { compatible = "regulator-fixed"; regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; regulator-min-microvolt = <1050000>;
@@ -1984,7 +1984,7 @@ vdd_hdmi_pll: regulator@8 { vin-supply = <&vdd_1v05_run>; }; - vdd_5v0_hdmi: regulator@9 { + vdd_5v0_hdmi: regulator-hdmicon { compatible = "regulator-fixed"; regulator-name = "+5V_HDMI_CON"; regulator-min-microvolt = <5000000>;
@@ -1995,7 +1995,7 @@ vdd_5v0_hdmi: regulator@9 { }; /* Molex power connector */ - vdd_5v0_sata: regulator@10 { + vdd_5v0_sata: regulator-5v0sata { compatible = "regulator-fixed"; regulator-name = "+5V_SATA"; regulator-min-microvolt = <5000000>;
@@ -2005,7 +2005,7 @@ vdd_5v0_sata: regulator@10 { vin-supply = <&vdd_5v0_sys>; }; - vdd_12v0_sata: regulator@11 { + vdd_12v0_sata: regulator-12v0sata { compatible = "regulator-fixed"; regulator-name = "+12V_SATA"; regulator-min-microvolt = <12000000>;
arch/arm/boot/dts/tegra124-nyan.dtsi +14 -14
@@ -582,7 +582,7 @@ backlight: backlight { 256>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -615,7 +615,7 @@ power { }; }; - vdd_mux: regulator@0 { + vdd_mux: regulator-mux { compatible = "regulator-fixed"; regulator-name = "+VDD_MUX"; regulator-min-microvolt = <12000000>;
@@ -624,7 +624,7 @@ vdd_mux: regulator@0 { regulator-boot-on; }; - vdd_5v0_sys: regulator@1 { + vdd_5v0_sys: regulator-5v0sys { compatible = "regulator-fixed"; regulator-name = "+5V_SYS"; regulator-min-microvolt = <5000000>;
@@ -634,7 +634,7 @@ vdd_5v0_sys: regulator@1 { vin-supply = <&vdd_mux>; }; - vdd_3v3_sys: regulator@2 { + vdd_3v3_sys: regulator-3v3sys { compatible = "regulator-fixed"; regulator-name = "+3.3V_SYS"; regulator-min-microvolt = <3300000>;
@@ -644,7 +644,7 @@ vdd_3v3_sys: regulator@2 { vin-supply = <&vdd_mux>; }; - vdd_3v3_run: regulator@3 { + vdd_3v3_run: regulator-3v3run { compatible = "regulator-fixed"; regulator-name = "+3.3V_RUN"; regulator-min-microvolt = <3300000>;
@@ -656,7 +656,7 @@ vdd_3v3_run: regulator@3 { vin-supply = <&vdd_3v3_sys>; }; - vdd_3v3_hdmi: regulator@4 { + vdd_3v3_hdmi: regulator-3v3hdmi { compatible = "regulator-fixed"; regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; regulator-min-microvolt = <3300000>;
@@ -664,7 +664,7 @@ vdd_3v3_hdmi: regulator@4 { vin-supply = <&vdd_3v3_run>; }; - vdd_led: regulator@5 { + vdd_led: regulator-led { compatible = "regulator-fixed"; regulator-name = "+VDD_LED"; gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
@@ -672,7 +672,7 @@ vdd_led: regulator@5 { vin-supply = <&vdd_mux>; }; - vdd_5v0_ts: regulator@6 { + vdd_5v0_ts: regulator-ts { compatible = "regulator-fixed"; regulator-name = "+5V_VDD_TS_SW"; regulator-min-microvolt = <5000000>;
@@ -683,7 +683,7 @@ vdd_5v0_ts: regulator@6 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb1_vbus: regulator@7 { + vdd_usb1_vbus: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_HS"; regulator-min-microvolt = <5000000>;
@@ -694,7 +694,7 @@ vdd_usb1_vbus: regulator@7 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb3_vbus: regulator@8 { + vdd_usb3_vbus: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_SS"; regulator-min-microvolt = <5000000>;
@@ -705,7 +705,7 @@ vdd_usb3_vbus: regulator@8 { vin-supply = <&vdd_5v0_sys>; }; - vdd_3v3_panel: regulator@9 { + vdd_3v3_panel: regulator-panel { compatible = "regulator-fixed"; regulator-name = "+3.3V_PANEL"; regulator-min-microvolt = <3300000>;
@@ -715,7 +715,7 @@ vdd_3v3_panel: regulator@9 { vin-supply = <&vdd_3v3_run>; }; - vdd_3v3_lp0: regulator@10 { + vdd_3v3_lp0: regulator-lp0 { compatible = "regulator-fixed"; regulator-name = "+3.3V_LP0"; regulator-min-microvolt = <3300000>;
@@ -730,7 +730,7 @@ vdd_3v3_lp0: regulator@10 { vin-supply = <&vdd_3v3_sys>; }; - vdd_hdmi_pll: regulator@11 { + vdd_hdmi_pll: regulator-hdmipll { compatible = "regulator-fixed"; regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; regulator-min-microvolt = <1050000>;
@@ -739,7 +739,7 @@ vdd_hdmi_pll: regulator@11 { vin-supply = <&vdd_1v05_run>; }; - vdd_5v0_hdmi: regulator@12 { + vdd_5v0_hdmi: regulator-hdmicon { compatible = "regulator-fixed"; regulator-name = "+5V_HDMI_CON"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra124-venice2.dts +14 -14
@@ -1061,7 +1061,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1086,7 +1086,7 @@ panel: panel { ddc-i2c-bus = <&dpaux>; }; - vdd_mux: regulator@0 { + vdd_mux: regulator-mux { compatible = "regulator-fixed"; regulator-name = "+VDD_MUX"; regulator-min-microvolt = <12000000>;
@@ -1095,7 +1095,7 @@ vdd_mux: regulator@0 { regulator-boot-on; }; - vdd_5v0_sys: regulator@1 { + vdd_5v0_sys: regulator-5v0sys { compatible = "regulator-fixed"; regulator-name = "+5V_SYS"; regulator-min-microvolt = <5000000>;
@@ -1105,7 +1105,7 @@ vdd_5v0_sys: regulator@1 { vin-supply = <&vdd_mux>; }; - vdd_3v3_sys: regulator@2 { + vdd_3v3_sys: regulator-3v3sys { compatible = "regulator-fixed"; regulator-name = "+3.3V_SYS"; regulator-min-microvolt = <3300000>;
@@ -1115,7 +1115,7 @@ vdd_3v3_sys: regulator@2 { vin-supply = <&vdd_mux>; }; - vdd_3v3_run: regulator@3 { + vdd_3v3_run: regulator-3v3run { compatible = "regulator-fixed"; regulator-name = "+3.3V_RUN"; regulator-min-microvolt = <3300000>;
@@ -1127,7 +1127,7 @@ vdd_3v3_run: regulator@3 { vin-supply = <&vdd_3v3_sys>; }; - vdd_3v3_hdmi: regulator@4 { + vdd_3v3_hdmi: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; regulator-min-microvolt = <3300000>;
@@ -1135,7 +1135,7 @@ vdd_3v3_hdmi: regulator@4 { vin-supply = <&vdd_3v3_run>; }; - vdd_led: regulator@5 { + vdd_led: regulator-led { compatible = "regulator-fixed"; regulator-name = "+VDD_LED"; regulator-min-microvolt = <3300000>;
@@ -1145,7 +1145,7 @@ vdd_led: regulator@5 { vin-supply = <&vdd_mux>; }; - vdd_5v0_ts: regulator@6 { + vdd_5v0_ts: regulator-ts { compatible = "regulator-fixed"; regulator-name = "+5V_VDD_TS_SW"; regulator-min-microvolt = <5000000>;
@@ -1156,7 +1156,7 @@ vdd_5v0_ts: regulator@6 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb1_vbus: regulator@7 { + vdd_usb1_vbus: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_HS"; regulator-min-microvolt = <5000000>;
@@ -1167,7 +1167,7 @@ vdd_usb1_vbus: regulator@7 { vin-supply = <&vdd_5v0_sys>; }; - vdd_usb3_vbus: regulator@8 { + vdd_usb3_vbus: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "+5V_USB_SS"; regulator-min-microvolt = <5000000>;
@@ -1178,7 +1178,7 @@ vdd_usb3_vbus: regulator@8 { vin-supply = <&vdd_5v0_sys>; }; - vdd_3v3_panel: regulator@9 { + vdd_3v3_panel: regulator-panel { compatible = "regulator-fixed"; regulator-name = "+3.3V_PANEL"; regulator-min-microvolt = <3300000>;
@@ -1188,7 +1188,7 @@ vdd_3v3_panel: regulator@9 { vin-supply = <&vdd_3v3_run>; }; - vdd_3v3_lp0: regulator@10 { + vdd_3v3_lp0: regulator-lp0 { compatible = "regulator-fixed"; regulator-name = "+3.3V_LP0"; regulator-min-microvolt = <3300000>;
@@ -1203,7 +1203,7 @@ vdd_3v3_lp0: regulator@10 { vin-supply = <&vdd_3v3_sys>; }; - vdd_hdmi_pll: regulator@11 { + vdd_hdmi_pll: regulator-hdmipll { compatible = "regulator-fixed"; regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; regulator-min-microvolt = <1050000>;
@@ -1212,7 +1212,7 @@ vdd_hdmi_pll: regulator@11 { vin-supply = <&vdd_1v05_run>; }; - vdd_5v0_hdmi: regulator@12 { + vdd_5v0_hdmi: regulator-hdmicon { compatible = "regulator-fixed"; regulator-name = "+5V_HDMI_CON"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +6 -6
@@ -827,7 +827,7 @@ bat1010: battery-2s1p { }; /* PMIC has a built-in 32KHz oscillator which is used by PMC */ - clk32k_in: clock@0 { + clk32k_in: clock-32k-in { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>;
@@ -839,7 +839,7 @@ clk32k_in: clock@0 { * oscillator is used as a reference clock-source by the * Azurewave WiFi/BT module. */ - rtc_32k_wifi: clock@1 { + rtc_32k_wifi: clock-32k-wifi { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>;
@@ -964,7 +964,7 @@ lvds_encoder_output: endpoint { }; }; - vdd_5v0_sys: regulator@0 { + vdd_5v0_sys: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -972,7 +972,7 @@ vdd_5v0_sys: regulator@0 { regulator-always-on; }; - vdd_3v3_sys: regulator@1 { + vdd_3v3_sys: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3_vs"; regulator-min-microvolt = <3300000>;
@@ -981,7 +981,7 @@ vdd_3v3_sys: regulator@1 { vin-supply = <&vdd_5v0_sys>; }; - vdd_1v8_sys: regulator@2 { + vdd_1v8_sys: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8_vs"; regulator-min-microvolt = <1800000>;
@@ -990,7 +990,7 @@ vdd_1v8_sys: regulator@2 { vin-supply = <&vdd_5v0_sys>; }; - vdd_pnl: regulator@3 { + vdd_pnl: regulator-panel { compatible = "regulator-fixed"; regulator-name = "vdd_panel"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra20-harmony.dts +8 -8
@@ -640,7 +640,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -666,7 +666,7 @@ panel: panel { backlight = <&backlight>; }; - vdd_5v0_reg: regulator@0 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -674,7 +674,7 @@ vdd_5v0_reg: regulator@0 { regulator-always-on; }; - regulator@1 { + regulator-1v5 { compatible = "regulator-fixed"; regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>;
@@ -682,7 +682,7 @@ regulator@1 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - regulator@2 { + regulator-1v2 { compatible = "regulator-fixed"; regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>;
@@ -691,7 +691,7 @@ regulator@2 { enable-active-high; }; - pci_vdd_reg: regulator@3 { + pci_vdd_reg: regulator-1v05 { compatible = "regulator-fixed"; regulator-name = "vdd_1v05"; regulator-min-microvolt = <1050000>;
@@ -700,7 +700,7 @@ pci_vdd_reg: regulator@3 { enable-active-high; }; - vdd_pnl_reg: regulator@4 { + vdd_pnl_reg: regulator-pn1 { compatible = "regulator-fixed"; regulator-name = "vdd_pnl"; regulator-min-microvolt = <2800000>;
@@ -709,7 +709,7 @@ vdd_pnl_reg: regulator@4 { enable-active-high; }; - vdd_bl_reg: regulator@5 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <2800000>;
@@ -718,7 +718,7 @@ vdd_bl_reg: regulator@5 { enable-active-high; }; - vdd_5v0_hdmi: regulator@6 { + vdd_5v0_hdmi: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "VDDIO_HDMI"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra20-medcom-wide.dts +4 -4
@@ -92,7 +92,7 @@ sound { clock-names = "pll_a", "pll_a_out0", "mclk"; }; - vcc_24v_reg: regulator@100 { + vcc_24v_reg: regulator-24v0 { compatible = "regulator-fixed"; regulator-name = "vcc_24v"; regulator-min-microvolt = <24000000>;
@@ -100,7 +100,7 @@ vcc_24v_reg: regulator@100 { regulator-always-on; }; - vdd_5v0_reg: regulator@101 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; vin-supply = <&vcc_24v_reg>;
@@ -109,7 +109,7 @@ vdd_5v0_reg: regulator@101 { regulator-always-on; }; - vdd_3v3_reg: regulator@102 { + vdd_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; vin-supply = <&vcc_24v_reg>;
@@ -118,7 +118,7 @@ vdd_3v3_reg: regulator@102 { regulator-always-on; }; - vdd_1v8_reg: regulator@103 { + vdd_1v8_reg: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8"; vin-supply = <&vdd_3v3_reg>;
arch/arm/boot/dts/tegra20-paz00.dts +3 -3
@@ -575,7 +575,7 @@ backlight: backlight { default-brightness-level = <10>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -612,7 +612,7 @@ panel: panel { backlight = <&backlight>; }; - p5valw_reg: regulator@0 { + p5valw_reg: regulator-5v0alw { compatible = "regulator-fixed"; regulator-name = "+5valw"; regulator-min-microvolt = <5000000>;
@@ -620,7 +620,7 @@ p5valw_reg: regulator@0 { regulator-always-on; }; - vdd_pnl_reg: regulator@1 { + vdd_pnl_reg: regulator-3v0 { compatible = "regulator-fixed"; regulator-name = "+3VS,vdd_pnl"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra20-plutux.dts +4 -4
@@ -60,7 +60,7 @@ sound { clock-names = "pll_a", "pll_a_out0", "mclk"; }; - vcc_24v_reg: regulator@100 { + vcc_24v_reg: regulator-24v0 { compatible = "regulator-fixed"; regulator-name = "vcc_24v"; regulator-min-microvolt = <24000000>;
@@ -68,7 +68,7 @@ vcc_24v_reg: regulator@100 { regulator-always-on; }; - vdd_5v0_reg: regulator@101 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; vin-supply = <&vcc_24v_reg>;
@@ -77,7 +77,7 @@ vdd_5v0_reg: regulator@101 { regulator-always-on; }; - vdd_3v3_reg: regulator@102 { + vdd_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@ vdd_3v3_reg: regulator@102 { regulator-always-on; }; - vdd_1v8_reg: regulator@103 { + vdd_1v8_reg: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8"; vin-supply = <&vdd_3v3_reg>;
arch/arm/boot/dts/tegra20-seaboard.dts +8 -8
@@ -792,7 +792,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -828,7 +828,7 @@ panel: panel { ddc-i2c-bus = <&lvds_ddc>; }; - vdd_5v0_reg: regulator@0 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -836,7 +836,7 @@ vdd_5v0_reg: regulator@0 { regulator-always-on; }; - regulator@1 { + regulator-1v5 { compatible = "regulator-fixed"; regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>;
@@ -844,7 +844,7 @@ regulator@1 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - regulator@2 { + regulator-1v2 { compatible = "regulator-fixed"; regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>;
@@ -853,7 +853,7 @@ regulator@2 { enable-active-high; }; - vbus_reg: regulator@3 { + vbus_reg: regulator-vbus { compatible = "regulator-fixed"; regulator-name = "vdd_vbus_wup1"; regulator-min-microvolt = <5000000>;
@@ -864,7 +864,7 @@ vbus_reg: regulator@3 { regulator-boot-on; }; - vdd_pnl_reg: regulator@4 { + vdd_pnl_reg: regulator-pnl { compatible = "regulator-fixed"; regulator-name = "vdd_pnl"; regulator-min-microvolt = <2800000>;
@@ -873,7 +873,7 @@ vdd_pnl_reg: regulator@4 { enable-active-high; }; - vdd_bl_reg: regulator@5 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <2800000>;
@@ -882,7 +882,7 @@ vdd_bl_reg: regulator@5 { enable-active-high; }; - vdd_hdmi: regulator@6 { + vdd_hdmi: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "VDDIO_HDMI"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra20-tamonten.dtsi +2 -2
@@ -502,13 +502,13 @@ mmc@c8000600 { status = "okay"; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>; }; - pci_vdd_reg: regulator@1 { + pci_vdd_reg: regulator-1v05 { compatible = "regulator-fixed"; regulator-name = "vdd_1v05"; regulator-min-microvolt = <1050000>;
arch/arm/boot/dts/tegra20-tec.dts +4 -4
@@ -69,7 +69,7 @@ sound { clock-names = "pll_a", "pll_a_out0", "mclk"; }; - vcc_24v_reg: regulator@100 { + vcc_24v_reg: regulator-24v { compatible = "regulator-fixed"; regulator-name = "vcc_24v"; regulator-min-microvolt = <24000000>;
@@ -77,7 +77,7 @@ vcc_24v_reg: regulator@100 { regulator-always-on; }; - vdd_5v0_reg: regulator@101 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; vin-supply = <&vcc_24v_reg>;
@@ -86,7 +86,7 @@ vdd_5v0_reg: regulator@101 { regulator-always-on; }; - vdd_3v3_reg: regulator@102 { + vdd_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; vin-supply = <&vcc_24v_reg>;
@@ -95,7 +95,7 @@ vdd_3v3_reg: regulator@102 { regulator-always-on; }; - vdd_1v8_reg: regulator@103 { + vdd_1v8_reg: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "vdd_1v8"; vin-supply = <&vdd_3v3_reg>;
arch/arm/boot/dts/tegra20-trimslice.dts +6 -6
@@ -379,7 +379,7 @@ mmc@c8000600 { bus-width = <4>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -401,7 +401,7 @@ poweroff { gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; }; - hdmi_vdd_reg: regulator@0 { + hdmi_vdd_reg: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "avdd_hdmi"; regulator-min-microvolt = <3300000>;
@@ -409,7 +409,7 @@ hdmi_vdd_reg: regulator@0 { regulator-always-on; }; - hdmi_pll_reg: regulator@1 { + hdmi_pll_reg: regulator-hdmipll { compatible = "regulator-fixed"; regulator-name = "avdd_hdmi_pll"; regulator-min-microvolt = <1800000>;
@@ -417,7 +417,7 @@ hdmi_pll_reg: regulator@1 { regulator-always-on; }; - vbus_reg: regulator@2 { + vbus_reg: regulator-vbus { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -428,7 +428,7 @@ vbus_reg: regulator@2 { regulator-boot-on; }; - pci_clk_reg: regulator@3 { + pci_clk_reg: regulator-pciclk { compatible = "regulator-fixed"; regulator-name = "pci_clk"; regulator-min-microvolt = <3300000>;
@@ -436,7 +436,7 @@ pci_clk_reg: regulator@3 { regulator-always-on; }; - pci_vdd_reg: regulator@4 { + pci_vdd_reg: regulator-pcivdd { compatible = "regulator-fixed"; regulator-name = "pci_vdd"; regulator-min-microvolt = <1050000>;
arch/arm/boot/dts/tegra20-ventana.dts +6 -6
@@ -606,7 +606,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -647,7 +647,7 @@ panel: panel { ddc-i2c-bus = <&lvds_ddc>; }; - vdd_5v0_reg: regulator@0 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -655,7 +655,7 @@ vdd_5v0_reg: regulator@0 { regulator-always-on; }; - regulator@1 { + regulator-1v5 { compatible = "regulator-fixed"; regulator-name = "vdd_1v5"; regulator-min-microvolt = <1500000>;
@@ -663,7 +663,7 @@ regulator@1 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - regulator@2 { + regulator-1v2 { compatible = "regulator-fixed"; regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>;
@@ -672,7 +672,7 @@ regulator@2 { enable-active-high; }; - vdd_pnl_reg: regulator@3 { + vdd_pnl_reg: regulator-pnl { compatible = "regulator-fixed"; regulator-name = "vdd_pnl"; regulator-min-microvolt = <2800000>;
@@ -681,7 +681,7 @@ vdd_pnl_reg: regulator@3 { enable-active-high; }; - vdd_bl_reg: regulator@4 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <2800000>;
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +5 -5
@@ -1069,7 +1069,7 @@ battery_cell: battery-cell { }; /* PMIC has a built-in 32KHz oscillator which is used by PMC */ - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>;
@@ -1207,7 +1207,7 @@ lvds_encoder_output: endpoint { }; }; - vdd_5v0_sys: regulator@0 { + vdd_5v0_sys: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v0"; regulator-min-microvolt = <5000000>;
@@ -1216,7 +1216,7 @@ vdd_5v0_sys: regulator@0 { regulator-boot-on; }; - vdd_3v3_sys: regulator@1 { + vdd_3v3_sys: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "vdd_3v3"; regulator-min-microvolt = <3300000>;
@@ -1226,7 +1226,7 @@ vdd_3v3_sys: regulator@1 { vin-supply = <&vdd_5v0_sys>; }; - vdd_pnl: regulator@2 { + vdd_pnl: regulator-panel { compatible = "regulator-fixed"; regulator-name = "vdd_panel"; regulator-min-microvolt = <3300000>;
@@ -1237,7 +1237,7 @@ vdd_pnl: regulator@2 { vin-supply = <&vdd_3v3_sys>; }; - vcc_3v3_ts: regulator@3 { + vcc_3v3_ts: regulator-ts { compatible = "regulator-fixed"; regulator-name = "ldo_s-1167_3v3"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi +2 -2
@@ -166,12 +166,12 @@ ldo8 { }; }; - vdd_3v3_sys: regulator@1 { + vdd_3v3_sys: regulator-3v3 { gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; - regulator@4 { + regulator-usb { compatible = "regulator-fixed"; regulator-name = "avdd_usb"; regulator-min-microvolt = <3300000>;
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi +1 -1
@@ -143,7 +143,7 @@ vdd_core: core-regulator@60 { }; }; - vdd_3v3_sys: regulator@1 { + vdd_3v3_sys: regulator-3v3 { gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; enable-active-high; };
arch/arm/boot/dts/tegra30-beaver.dts +10 -10
@@ -1966,7 +1966,7 @@ usb-phy@7d008000 { status = "okay"; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -1985,7 +1985,7 @@ gpled2 { }; }; - vdd_5v_in_reg: regulator@0 { + vdd_5v_in_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "vdd_5v_in"; regulator-min-microvolt = <5000000>;
@@ -1993,7 +1993,7 @@ vdd_5v_in_reg: regulator@0 { regulator-always-on; }; - chargepump_5v_reg: regulator@1 { + chargepump_5v_reg: regulator-chargepump { compatible = "regulator-fixed"; regulator-name = "chargepump_5v"; regulator-min-microvolt = <5000000>;
@@ -2004,7 +2004,7 @@ chargepump_5v_reg: regulator@1 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - ddr_reg: regulator@2 { + ddr_reg: regulator-ddr { compatible = "regulator-fixed"; regulator-name = "vdd_ddr"; regulator-min-microvolt = <1500000>;
@@ -2016,7 +2016,7 @@ ddr_reg: regulator@2 { vin-supply = <&vdd_5v_in_reg>; }; - vdd_5v_sata_reg: regulator@3 { + vdd_5v_sata_reg: regulator-sata { compatible = "regulator-fixed"; regulator-name = "vdd_5v_sata"; regulator-min-microvolt = <5000000>;
@@ -2028,7 +2028,7 @@ vdd_5v_sata_reg: regulator@3 { vin-supply = <&vdd_5v_in_reg>; }; - usb1_vbus_reg: regulator@4 { + usb1_vbus_reg: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -2039,7 +2039,7 @@ usb1_vbus_reg: regulator@4 { vin-supply = <&vdd_5v_in_reg>; }; - usb3_vbus_reg: regulator@5 { + usb3_vbus_reg: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "usb3_vbus"; regulator-min-microvolt = <5000000>;
@@ -2050,7 +2050,7 @@ usb3_vbus_reg: regulator@5 { vin-supply = <&vdd_5v_in_reg>; }; - sys_3v3_reg: regulator@6 { + sys_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "sys_3v3,vdd_3v3_alw"; regulator-min-microvolt = <3300000>;
@@ -2062,7 +2062,7 @@ sys_3v3_reg: regulator@6 { vin-supply = <&vdd_5v_in_reg>; }; - sys_3v3_pexs_reg: regulator@7 { + sys_3v3_pexs_reg: regulator-pexs { compatible = "regulator-fixed"; regulator-name = "sys_3v3_pexs"; regulator-min-microvolt = <3300000>;
@@ -2074,7 +2074,7 @@ sys_3v3_pexs_reg: regulator@7 { vin-supply = <&sys_3v3_reg>; }; - vdd_5v0_hdmi: regulator@8 { + vdd_5v0_hdmi: regulator-hdmi { compatible = "regulator-fixed"; regulator-name = "+VDD_5V_HDMI"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra30-cardhu-a02.dts +6 -6
@@ -16,7 +16,7 @@ mmc@78000400 { keep-power-in-suspend; }; - ddr_reg: regulator@100 { + ddr_reg: regulator-ddr { compatible = "regulator-fixed"; regulator-name = "vdd_ddr"; regulator-min-microvolt = <1500000>;
@@ -27,7 +27,7 @@ ddr_reg: regulator@100 { gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; }; - sys_3v3_reg: regulator@101 { + sys_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "sys_3v3"; regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@ sys_3v3_reg: regulator@101 { gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; }; - usb1_vbus_reg: regulator@102 { + usb1_vbus_reg: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -49,7 +49,7 @@ usb1_vbus_reg: regulator@102 { vin-supply = <&vdd_5v0_reg>; }; - usb3_vbus_reg: regulator@103 { + usb3_vbus_reg: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "usb3_vbus"; regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@ usb3_vbus_reg: regulator@103 { vin-supply = <&vdd_5v0_reg>; }; - vdd_5v0_reg: regulator@104 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "5v0"; regulator-min-microvolt = <5000000>;
@@ -69,7 +69,7 @@ vdd_5v0_reg: regulator@104 { gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; }; - vdd_bl_reg: regulator@105 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra30-cardhu-a04.dts +7 -7
@@ -16,7 +16,7 @@ mmc@78000400 { keep-power-in-suspend; }; - ddr_reg: regulator@100 { + ddr_reg: regulator-ddr { compatible = "regulator-fixed"; regulator-name = "ddr"; regulator-min-microvolt = <1500000>;
@@ -27,7 +27,7 @@ ddr_reg: regulator@100 { gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; }; - sys_3v3_reg: regulator@101 { + sys_3v3_reg: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "sys_3v3"; regulator-min-microvolt = <3300000>;
@@ -38,7 +38,7 @@ sys_3v3_reg: regulator@101 { gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; }; - usb1_vbus_reg: regulator@102 { + usb1_vbus_reg: regulator-usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>;
@@ -49,7 +49,7 @@ usb1_vbus_reg: regulator@102 { vin-supply = <&vdd_5v0_reg>; }; - usb3_vbus_reg: regulator@103 { + usb3_vbus_reg: regulator-usb3 { compatible = "regulator-fixed"; regulator-name = "usb3_vbus"; regulator-min-microvolt = <5000000>;
@@ -60,7 +60,7 @@ usb3_vbus_reg: regulator@103 { vin-supply = <&vdd_5v0_reg>; }; - vdd_5v0_reg: regulator@104 { + vdd_5v0_reg: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "5v0"; regulator-min-microvolt = <5000000>;
@@ -69,7 +69,7 @@ vdd_5v0_reg: regulator@104 { gpio = <&pmic 8 GPIO_ACTIVE_HIGH>; }; - vdd_bl_reg: regulator@105 { + vdd_bl_reg: regulator-bl { compatible = "regulator-fixed"; regulator-name = "vdd_bl"; regulator-min-microvolt = <5000000>;
@@ -80,7 +80,7 @@ vdd_bl_reg: regulator@105 { gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; }; - vdd_bl2_reg: regulator@106 { + vdd_bl2_reg: regulator-bl2 { compatible = "regulator-fixed"; regulator-name = "vdd_bl2"; regulator-min-microvolt = <5000000>;
arch/arm/boot/dts/tegra30-cardhu.dtsi +14 -14
@@ -433,7 +433,7 @@ backlight: backlight { default-brightness-level = <6>; }; - clk32k_in: clock@0 { + clk32k_in: clock-32k { compatible = "fixed-clock"; clock-frequency = <32768>; #clock-cells = <0>;
@@ -475,7 +475,7 @@ panel: panel { backlight = <&backlight>; }; - vdd_ac_bat_reg: regulator@0 { + vdd_ac_bat_reg: regulator-acbat { compatible = "regulator-fixed"; regulator-name = "vdd_ac_bat"; regulator-min-microvolt = <5000000>;
@@ -483,7 +483,7 @@ vdd_ac_bat_reg: regulator@0 { regulator-always-on; }; - cam_1v8_reg: regulator@1 { + cam_1v8_reg: regulator-cam { compatible = "regulator-fixed"; regulator-name = "cam_1v8"; regulator-min-microvolt = <1800000>;
@@ -493,7 +493,7 @@ cam_1v8_reg: regulator@1 { vin-supply = <&vio_reg>; }; - cp_5v_reg: regulator@2 { + cp_5v_reg: regulator-5v0cp { compatible = "regulator-fixed"; regulator-name = "cp_5v"; regulator-min-microvolt = <5000000>;
@@ -504,7 +504,7 @@ cp_5v_reg: regulator@2 { gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - emmc_3v3_reg: regulator@3 { + emmc_3v3_reg: regulator-emmc { compatible = "regulator-fixed"; regulator-name = "emmc_3v3"; regulator-min-microvolt = <3300000>;
@@ -516,7 +516,7 @@ emmc_3v3_reg: regulator@3 { vin-supply = <&sys_3v3_reg>; }; - modem_3v3_reg: regulator@4 { + modem_3v3_reg: regulator-modem { compatible = "regulator-fixed"; regulator-name = "modem_3v3"; regulator-min-microvolt = <3300000>;
@@ -525,7 +525,7 @@ modem_3v3_reg: regulator@4 { gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>; }; - pex_hvdd_3v3_reg: regulator@5 { + pex_hvdd_3v3_reg: regulator-pex { compatible = "regulator-fixed"; regulator-name = "pex_hvdd_3v3"; regulator-min-microvolt = <3300000>;
@@ -535,7 +535,7 @@ pex_hvdd_3v3_reg: regulator@5 { vin-supply = <&sys_3v3_reg>; }; - vdd_cam1_ldo_reg: regulator@6 { + vdd_cam1_ldo_reg: regulator-cam1 { compatible = "regulator-fixed"; regulator-name = "vdd_cam1_ldo"; regulator-min-microvolt = <2800000>;
@@ -545,7 +545,7 @@ vdd_cam1_ldo_reg: regulator@6 { vin-supply = <&sys_3v3_reg>; }; - vdd_cam2_ldo_reg: regulator@7 { + vdd_cam2_ldo_reg: regulator-cam2 { compatible = "regulator-fixed"; regulator-name = "vdd_cam2_ldo"; regulator-min-microvolt = <2800000>;
@@ -555,7 +555,7 @@ vdd_cam2_ldo_reg: regulator@7 { vin-supply = <&sys_3v3_reg>; }; - vdd_cam3_ldo_reg: regulator@8 { + vdd_cam3_ldo_reg: regulator-cam3 { compatible = "regulator-fixed"; regulator-name = "vdd_cam3_ldo"; regulator-min-microvolt = <3300000>;
@@ -565,7 +565,7 @@ vdd_cam3_ldo_reg: regulator@8 { vin-supply = <&sys_3v3_reg>; }; - vdd_com_reg: regulator@9 { + vdd_com_reg: regulator-com { compatible = "regulator-fixed"; regulator-name = "vdd_com"; regulator-min-microvolt = <3300000>;
@@ -577,7 +577,7 @@ vdd_com_reg: regulator@9 { vin-supply = <&sys_3v3_reg>; }; - vdd_fuse_3v3_reg: regulator@10 { + vdd_fuse_3v3_reg: regulator-fuse { compatible = "regulator-fixed"; regulator-name = "vdd_fuse_3v3"; regulator-min-microvolt = <3300000>;
@@ -587,7 +587,7 @@ vdd_fuse_3v3_reg: regulator@10 { vin-supply = <&sys_3v3_reg>; }; - vdd_pnl1_reg: regulator@11 { + vdd_pnl1_reg: regulator-pnl1 { compatible = "regulator-fixed"; regulator-name = "vdd_pnl1"; regulator-min-microvolt = <3300000>;
@@ -599,7 +599,7 @@ vdd_pnl1_reg: regulator@11 { vin-supply = <&sys_3v3_reg>; }; - vdd_vid_reg: regulator@12 { + vdd_vid_reg: regulator-vid { compatible = "regulator-fixed"; regulator-name = "vddio_vid"; regulator-min-microvolt = <5000000>;
Signature · 1 line
2.33.1
PATCH v3 13/14 ARM: tegra: nexus7: Drop clock-frequency from NFC node
In reply to Dmitry OsipenkoFrom: David Heidelberg <[email protected]>
The clock-frequency property was never used and is deprecated now. Remove it from Nexus 7 device-tree.
--- arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi | 1 - arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi | 2 -- 2 files changed, 3 deletions(-)
arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi +0 -1
@@ -137,7 +137,6 @@ i2c@7000c500 { nfc@28 { compatible = "nxp,pn544-i2c"; reg = <0x28>; - clock-frequency = <100000>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_EDGE_RISING>;
arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi +0 -2
@@ -223,8 +223,6 @@ nfc@2a { compatible = "nxp,pn544-i2c"; reg = <0x2a>; - clock-frequency = <100000>; - interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
Signature · 1 line
2.33.1
PATCH v3 14/14 ARM: tegra: Enable video decoder on Tegra114
In reply to Dmitry OsipenkoFrom: Anton Bambura <[email protected]>
Add Video Decoder Engine node to Tegra114 device-tree.
--- arch/arm/boot/dts/tegra114.dtsi | 38 +++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)
arch/arm/boot/dts/tegra114.dtsi +38 -0
@@ -17,6 +17,19 @@ memory@80000000 { reg = <0x80000000 0x0>; }; + sram@40000000 { + compatible = "mmio-sram"; + reg = <0x40000000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000000 0x40000>; + + vde_pool: sram@400 { + reg = <0x400 0x3fc00>; + pool; + }; + }; + host1x@50000000 { compatible = "nvidia,tegra114-host1x"; reg = <0x50000000 0x00028000>;
@@ -253,6 +266,30 @@ gpio: gpio@6000d000 { */ }; + vde@6001a000 { + compatible = "nvidia,tegra114-vde"; + reg = <0x6001a000 0x1000>, /* Syntax Engine */ + <0x6001b000 0x1000>, /* Video Bitstream Engine */ + <0x6001c000 0x100>, /* Macroblock Engine */ + <0x6001c200 0x100>, /* Post-processing Engine */ + <0x6001c400 0x100>, /* Motion Compensation Engine */ + <0x6001c600 0x100>, /* Transform Engine */ + <0x6001c800 0x100>, /* Pixel prediction block */ + <0x6001ca00 0x100>, /* Video DMA */ + <0x6001d800 0x400>; /* Video frame controls */ + reg-names = "sxe", "bsev", "mbe", "ppe", "mce", + "tfe", "ppb", "vdma", "frameid"; + iram = <&vde_pool>; /* IRAM region */ + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */ + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */ + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */ + interrupt-names = "sync-token", "bsev", "sxe"; + clocks = <&tegra_car TEGRA114_CLK_VDE>; + reset-names = "vde", "mc"; + resets = <&tegra_car 61>, <&mc TEGRA114_MC_RESET_VDE>; + iommus = <&mc TEGRA_SWGROUP_VDE>; + }; + apbmisc@70000800 { compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc"; reg = <0x70000800 0x64>, /* Chip revision */
@@ -543,6 +580,7 @@ mc: memory-controller@70019000 { interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #iommu-cells = <1>; + #reset-cells = <1>; }; ahub@70080000 {
Signature · 1 line
2.33.1