configs/friendlyarm_nanopi_r2s: new defconfig
PATCH v2 1/1 configs/friendlyarm_nanopi_r2s: new defconfig
The NanoPi R2S is a FriendlyElec mini-router based on:
- Rockchip RK3328 SoC
- 1GB (or 2GB) DDR4 RAM
- Gigabit Ethernet (WAN)
- Gigabit Ethernet (USB3) (LAN)
- USB 2.0 Host Port
- MicroSD slot
- Reset button
- WAN - LAN - SYS LED
https://www.friendlyarm.com/index.php?route=product/product&path=69&product_id=282
--- DEVELOPERS | 2 + board/friendlyarm/nanopi-r2s/extlinux.conf | 4 ++ board/friendlyarm/nanopi-r2s/genimage.cfg | 22 +++++++++ board/friendlyarm/nanopi-r2s/post-build.sh | 5 ++ board/friendlyarm/nanopi-r2s/readme.txt | 57 ++++++++++++++++++++++ configs/friendlyarm_nanopi_r2s_defconfig | 34 +++++++++++++ 6 files changed, 124 insertions(+) create mode 100644 board/friendlyarm/nanopi-r2s/extlinux.conf create mode 100644 board/friendlyarm/nanopi-r2s/genimage.cfg create mode 100755 board/friendlyarm/nanopi-r2s/post-build.sh create mode 100644 board/friendlyarm/nanopi-r2s/readme.txt create mode 100644 configs/friendlyarm_nanopi_r2s_defconfig
DEVELOPERS +2 -0
@@ -1073,7 +1073,9 @@ F: configs/qemu_* N: Gilles Talis <[email protected]> F: board/freescale/imx8mmevk/ +F: board/friendlyarm/nanopi-r2s/ F: configs/freescale_imx8mmevk_defconfig +F: configs/friendlyarm_nanopi_r2s_defconfig F: package/cctz/ F: package/faad2/ F: package/fdk-aac/
board/friendlyarm/nanopi-r2s/extlinux.conf new file +4 -0
@@ -0,0 +1,4 @@ +label NanoPi R2S linux + kernel /boot/Image + devicetree /boot/rk3328-nanopi-r2s.dtb + append root=/dev/mmcblk0p1 rw rootwait
board/friendlyarm/nanopi-r2s/genimage.cfg new file +22 -0
@@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "idbloader.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot.itb" + offset = 8M + } + + partition rootfs { + partition-type = 0x83 + offset = 16M + image = "rootfs.ext4" + } +}
board/friendlyarm/nanopi-r2s/post-build.sh new file +5 -0
@@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/friendlyarm/nanopi-r2s/readme.txt new file +57 -0
57 lines not on this page · raw message
configs/friendlyarm_nanopi_r2s_defconfig new file +34 -0
@@ -0,0 +1,34 @@ +BR2_aarch64=y +BR2_ARM_FPU_VFPV4=y +BR2_TARGET_GENERIC_HOSTNAME="rk3328-nanopi-r2s" +BR2_TARGET_GENERIC_ISSUE="Welcome to Nanopi R2S RK3328" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-r2s/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-r2s/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-nanopi-r2s" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-r2s-rk3328" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y
Signature · 6 lines
2.32.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Hello Gilles,
Quoted 24 lines · On Sat, 15 Jan 2022 21:26:17 +0100 Gilles Talis <[email protected]> wrote:
configs/friendlyarm_nanopi_r2s_defconfig new file +24
-0+BR2_aarch64=y +BR2_ARM_FPU_VFPV4=y +BR2_TARGET_GENERIC_HOSTNAME="rk3328-nanopi-r2s" +BR2_TARGET_GENERIC_ISSUE="Welcome to Nanopi R2S RK3328" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-r2s/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-r2s/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-nanopi-r2s" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-r2s-rk3328" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
configs/friendlyarm_nanopi_r2s_defconfig line 34
Quoted 10 lines
configs/friendlyarm_nanopi_r2s_defconfig new file +10
-0+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y
Thanks for this v2. Unfortunately, there is one thing I did not notice when reviewing v1: you should use fixed versions of the Linux kernel, U-Boot and TF-A. Here your defconfig uses whatever is the latest, which is not the policy we have chosen for our defconfigs.
Could you fix that up by using fixed versions?
Thanks a lot!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Hi Thomas,
thanks for the review.
Quoted 46 lines · Thomas Petazzoni
Hello Gilles,
Quoted 24 lines · On Sat, 15 Jan 2022 21:26:17 +0100 Gilles Talis <[email protected]> wrote:
configs/friendlyarm_nanopi_r2s_defconfig new file +24
-0+BR2_aarch64=y +BR2_ARM_FPU_VFPV4=y +BR2_TARGET_GENERIC_HOSTNAME="rk3328-nanopi-r2s" +BR2_TARGET_GENERIC_ISSUE="Welcome to Nanopi R2S RK3328" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-r2s/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-r2s/genimage.cfg" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3328-nanopi-r2s" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="120M" +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3328" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-r2s-rk3328" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=yconfigs/friendlyarm_nanopi_r2s_defconfig line 34
Quoted 10 lines
configs/friendlyarm_nanopi_r2s_defconfig new file +10
-0+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=yThanks for this v2. Unfortunately, there is one thing I did not notice when reviewing v1: you should use fixed versions of the Linux kernel, U-Boot and TF-A. Here your defconfig uses whatever is the latest, which is not the policy we have chosen for our defconfigs.
Quoted 1 line
Could you fix that up by using fixed versions?
Yes. Will send a v3 shortly.
Quoted 8 lines
Thanks a lot!
Thomas
--
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training
https://bootlin.com
Thanks!
Gilles.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot