imx: imx8qm: cgtqmx8: switch to binman
Subsystems (3)
PATCH 1/1 imx: imx8qm: cgtqmx8: switch to binman
Switch to use binman to pack images
Signed-off-by Oliver Graute <[email protected]>
--- arch/arm/dts/imx8qm-cgtqmx8.dts | 1 + arch/arm/mach-imx/imx8/Kconfig | 1 + board/congatec/cgtqmx8/imximage.cfg | 4 ++-- configs/cgtqmx8_defconfig | 2 +- doc/board/congatec/cgtqmx8.rst | 3 +-- 5 files changed, 6 insertions(+), 5 deletions(-)
arch/arm/dts/imx8qm-cgtqmx8.dts +1 -0
@@ -12,6 +12,7 @@ /memreserve/ 0x80000000 0x00020000; #include "fsl-imx8qm.dtsi" +#include "imx8qm-u-boot.dtsi" / { model = "Congatec QMX8 Qseven series";
arch/arm/mach-imx/imx8/Kconfig +1 -0
@@ -75,6 +75,7 @@ config TARGET_IMX8QM_MEK config TARGET_CONGA_QMX8 bool "Support congatec conga-QMX8 board" + select BINMAN select BOARD_LATE_INIT select SUPPORT_SPL select IMX8QM
board/congatec/cgtqmx8/imximage.cfg +2 -2
@@ -5,8 +5,8 @@ #define __ASSEMBLY__ -/* Boot from SD, sector size 0x400 */ -BOOT_FROM SD 0x400 +BOOT_FROM sd + /* SoC type IMX8QM */ SOC_TYPE IMX8QM /* Append seco container image */
configs/cgtqmx8_defconfig +1 -1
@@ -18,7 +18,7 @@ CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_FIT=y CONFIG_SPL_LOAD_FIT=y -CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" +# CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/congatec/cgtqmx8/imximage.cfg" CONFIG_BOOTDELAY=3 CONFIG_LOG=y
doc/board/congatec/cgtqmx8.rst +1 -2
@@ -57,8 +57,7 @@ Build U-Boot $ export ATF_LOAD_ADDR=0x80000000 $ export BL33_LOAD_ADDR=0x80020000 $ make cgtqmx8_defconfig - $ make u-boot.bin - $ make flash.bin + $ make Flash the binary into the SD card ---------------------------------
Signature · 1 line
2.17.1
Quoted 11 lines · Oliver Graute
Switch to use binman to pack images
Signed-off-by Oliver Graute <[email protected]>--- arch/arm/dts/imx8qm-cgtqmx8.dts | 1 + arch/arm/mach-imx/imx8/Kconfig | 1 + board/congatec/cgtqmx8/imximage.cfg | 4 ++-- configs/cgtqmx8_defconfig | 2 +- doc/board/congatec/cgtqmx8.rst | 3 +-- 5 files changed, 6 insertions(+), 5 deletions(-)
Reviewed-by Simon Glass <[email protected]>
Hi Oliver,
Quoted 14 lines · Simon Glass
Quoted 11 lines · Oliver Graute
Switch to use binman to pack images
Signed-off-by Oliver Graute <[email protected]>--- arch/arm/dts/imx8qm-cgtqmx8.dts | 1 + arch/arm/mach-imx/imx8/Kconfig | 1 + board/congatec/cgtqmx8/imximage.cfg | 4 ++-- configs/cgtqmx8_defconfig | 2 +- doc/board/congatec/cgtqmx8.rst | 3 +-- 5 files changed, 6 insertions(+), 5 deletions(-)
Quoted 1 line
Reviewed-by Simon Glass <[email protected]>
Applying this, build fails. Could you take a look, rebase and repost ? Thanks !
Best regards,
Stefano
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
Quoted 17 lines · Stefano Babic
Hi Oliver,
Quoted 14 lines · Simon Glass
Quoted 11 lines · Oliver Graute
Switch to use binman to pack images
Signed-off-by Oliver Graute <[email protected]>--- arch/arm/dts/imx8qm-cgtqmx8.dts | 1 + arch/arm/mach-imx/imx8/Kconfig | 1 + board/congatec/cgtqmx8/imximage.cfg | 4 ++-- configs/cgtqmx8_defconfig | 2 +- doc/board/congatec/cgtqmx8.rst | 3 +-- 5 files changed, 6 insertions(+), 5 deletions(-)
Quoted 4 lines
Quoted 1 line
Reviewed-by Simon Glass <[email protected]>Applying this, build fails. Could you take a look, rebase and repost ? Thanks !
ok, 'll do.
Best Regards,
Oliver