KVM: arm64: Implement PSCI SYSTEM_SUSPEND
Subsystems (9)
v3 cover KVM: arm64: Implement PSCI SYSTEM_SUSPEND
The PSCI v1.0 specification describes a call, SYSTEM_SUSPEND, which allows software to request that the system be placed into the lowest possible power state and await an IMPLEMENTATION DEFINED wakeup event. This call is optional in v1.0 and v1.1. KVM does not currently support it in the v1.0 implementation.
This series adds support for the PSCI SYSTEM_SUSPEND call to KVM/arm64. By default, KVM will treat the call as equivalent to CPU_SUSPEND, wherein KVM handles the call as a guest WFI. However, this series also introduces an opt-in for the SYSTEM_SUSPEND call to exit to userspace. VMMs may use the event as a hint to save the VM to resume at a later time, freeing up system resources. Userspace can decide at the time of the exit whether or not to honor the SYSTEM_SUSPEND call.
Patch 1 is a small cleanup already present in kvmarm/next, but the series depends on it so it has been included to guarantee the series builds.
Patches 2-3 adds an additional check to the CPU_ON PSCI call. As Reiji noted, PSCI implementations can return INVALID_ADDRESS if it is determined that the provided entry address does not exist in the guest address space.
Patch 4 is another small cleanup to generically filter SMC64 calls when running an AArch32 EL1, avoiding the need to add a special case for the new PSCI call introduced in this series.
Patches 5-6 add support for tracking a vCPU's power state using KVM_MP_STATE_* values. This is significant as the series introduces an additional power state, which cannot be represented by the vcpu->arch.power_off boolean.
Patch 7 is a nitpick regarding the naming of a KVM_REQ_ handler.
Patches 8-9 provide the default implementation of PSCI SYSTEM_SUSPEND by synchronously resetting the calling vCPU and entering WFI.
Patches 10-12 introduce a new MP state, KVM_MP_STATE_SUSPENDED, which implements 'sticky' suspension. If userspace puts a vCPU in this state, it will exit to userspace for every recognized wakeup event (pending interrupt). When userspace is satisfied that a VM should resume, it must explicitly unpark the vCPU by marking it runnable again. This is useful for userspace to implement PSCI SYSTEM_SUSPEND if it decides to trap the call.
Patch 13 extends upon the implementation of PSCI SYSTEM_SUSPEND, granting userspace the opt-in capability of exiting to userspace on such a call. *NOTE* KVM_SYSTEM_EVENT_SUSPEND breaks away from the semantics of other system events. Userspace is required to manipulate the vCPU to either reset it or reject the call. Other PSCI calls that exit set an SMCCC return value before exiting, but doing so would clobber all of the pending reset state. I wanted to avoid adding additional API to convey the reset context to userspace so it may simply be expressed in the architected state.
Patch 14 increments the reported PSCI version to 1.1, as KVM already meets the requirements.
Patches 15-18 rework the PSCI selftest to make it amenable to additional test cases
Lastly, patch 19 tests that the KVM_SYSTEM_EVENT_SUSPEND exits are working as intended, and that KVM rejects invalid calls to PSCI SYSTEM_SUSPEND.
This series applies cleanly to v5.17-rc5. Testing was performed with the included selftest and suspending a QEMU guest (i.e. no system event exits) on an Ampere Altra machine.
v2: https://patchwork.kernel.org/project/kvm/cover/20210923191610.3814698-1-oupton at google.com/
v2 -> v3:
- rebase to 5.17-rc5
- Reject CPU_ON and SYSTEM_SUSPEND calls that provide an invalid IPA (Reiji)
- do *not* defer WFI as a requested event (Marc)
- Add support for userspace filtering of wakeup events if SUSPEND exits are enabled (Marc)
- Bump the reported PSCI verision to v1.1 (Marc)
Oliver Upton (19):
KVM: arm64: Drop unused param from kvm_psci_version()
KVM: arm64: Create a helper to check if IPA is valid
KVM: arm64: Reject invalid addresses for CPU_ON PSCI call
KVM: arm64: Clean up SMC64 PSCI filtering for AArch32 guests
KVM: arm64: Dedupe vCPU power off helpers
KVM: arm64: Track vCPU power state using MP state values
KVM: arm64: Rename the KVM_REQ_SLEEP handler
KVM: arm64: Add reset helper that accepts caller-provided reset state
KVM: arm64: Implement PSCI SYSTEM_SUSPEND
KVM: Create helper for setting a system event exit
KVM: arm64: Return a value from check_vcpu_requests()
KVM: arm64: Add support for userspace to suspend a vCPU
KVM: arm64: Add support KVM_SYSTEM_EVENT_SUSPEND to PSCI
SYSTEM_SUSPEND
KVM: arm64: Raise default PSCI version to v1.1
selftests: KVM: Rename psci_cpu_on_test to psci_test
selftests: KVM: Create helper for making SMCCC calls
selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test
selftests: KVM: Refactor psci_test to make it amenable to new tests
selftests: KVM: Test SYSTEM_SUSPEND PSCI call
Documentation/virt/kvm/api.rst | 62 ++++- arch/arm64/include/asm/kvm_host.h | 27 ++- arch/arm64/include/asm/kvm_mmu.h | 9 + arch/arm64/kvm/arm.c | 88 +++++-- arch/arm64/kvm/psci.c | 129 ++++++++--- arch/arm64/kvm/reset.c | 45 ++-- arch/arm64/kvm/vgic/vgic-kvm-device.c | 2 +- arch/riscv/kvm/vcpu_sbi_v01.c | 4 +- arch/x86/kvm/x86.c | 6 +- include/kvm/arm_psci.h | 9 +- include/linux/kvm_host.h | 7 + include/uapi/linux/kvm.h | 4 + tools/testing/selftests/kvm/.gitignore | 2 +- tools/testing/selftests/kvm/Makefile | 2 +- .../selftests/kvm/aarch64/psci_cpu_on_test.c | 121 ---------- .../testing/selftests/kvm/aarch64/psci_test.c | 218 ++++++++++++++++++ .../selftests/kvm/include/aarch64/processor.h | 22 ++ .../selftests/kvm/lib/aarch64/processor.c | 25 ++ tools/testing/selftests/kvm/steal_time.c | 13 +- 19 files changed, 571 insertions(+), 224 deletions(-) delete mode 100644 tools/testing/selftests/kvm/aarch64/psci_cpu_on_test.c create mode 100644 tools/testing/selftests/kvm/aarch64/psci_test.c
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
PATCH v3 1/19 KVM: arm64: Drop unused param from kvm_psci_version()
kvm_psci_version() consumes a pointer to struct kvm in addition to a vcpu pointer. Drop the kvm pointer as it is unused. While the comment suggests the explicit kvm pointer was useful for calling from hyp, there exist no such callsite in hyp.
--- arch/arm64/kvm/psci.c | 6 +++--- include/kvm/arm_psci.h | 6 +----- 2 files changed, 4 insertions(+), 8 deletions(-)
arch/arm64/kvm/psci.c +3 -3
@@ -85,7 +85,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)if (!vcpu)return PSCI_RET_INVALID_PARAMS ;if (!vcpu->arch.power_off) { -if (kvm_psci_version (source_vcpu, kvm) !=KVM_ARM_PSCI_0_1 ) +if (kvm_psci_version (source_vcpu) !=KVM_ARM_PSCI_0_1 )return PSCI_RET_ALREADY_ON ;else return PSCI_RET_INVALID_PARAMS ;
@@ -392,7 +392,7 @@ static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)*/ int kvm_psci_call (struct kvm_vcpu *vcpu) { -switch (kvm_psci_version (vcpu, vcpu->kvm)) { +switch (kvm_psci_version (vcpu)) {case KVM_ARM_PSCI_1_0 :return kvm_psci_1_0_call (vcpu);case KVM_ARM_PSCI_0_2 :
@@ -471,7 +471,7 @@ int kvm_arm_get_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)switch (reg->id) {case KVM_REG_ARM_PSCI_VERSION : - val =kvm_psci_version (vcpu, vcpu->kvm); + val =kvm_psci_version (vcpu);break ;case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1 :case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 :
include/kvm/arm_psci.h +1 -5
@@ -16,11 +16,7 @@#define KVM_ARM_PSCI_LATEST KVM_ARM_PSCI_1_0 -/* -* We need the KVM pointer independently from the vcpu as we can call -* this from HYP, and need to apply kern_hyp_va on it... -*/ -static inline int kvm_psci_version (struct kvm_vcpu *vcpu,struct kvm *kvm) +static inline int kvm_psci_version (struct kvm_vcpu *vcpu) {/* * Our PSCI implementation stays the same across versions from
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
Re: [PATCH v3 01/19] KVM: arm64: Drop unused param from kvm_psci_version()
Quoted 8 lines · Oliver Upton
kvm_psci_version()consumes a pointer to struct kvm in addition to a vcpu pointer. Drop the kvm pointer as it is unused. While the comment suggests the explicit kvm pointer was useful for calling from hyp, there exist no such callsite in hyp.Signed-off-by Oliver Upton <[email protected]>Signed-off-by Marc Zyngier <[email protected]>
PATCH v3 2/19 KVM: arm64: Create a helper to check if IPA is valid
In reply to Oliver UptonCreate a helper that tests if a given IPA fits within the guest's address space.
--- arch/arm64/include/asm/kvm_mmu.h | 9 +++++++++ arch/arm64/kvm/vgic/vgic-kvm-device.c | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-)
arch/arm64/include/asm/kvm_mmu.h +9 -0
@@ -111,6 +111,7 @@ alternative_cb_end#else #include <linux/pgtable.h> +#include <linux/kvm_host.h> #include <asm/pgalloc.h> #include <asm/cache.h> #include <asm/cacheflush.h>
@@ -147,6 +148,14 @@ static __always_inline unsigned long __kern_hyp_va(unsigned long v)#define kvm_phys_size (kvm) (_AC(1, ULL) << kvm_phys_shift(kvm))#define kvm_phys_mask (kvm) (kvm_phys_size(kvm) - _AC(1, ULL)) +/* +* Returns true if the provided IPA exists within the VM's IPA space. +*/ +static inline bool kvm_ipa_valid (struct kvm *kvm,phys_addr_t guest_ipa) +{ +return !(guest_ipa & ~kvm_phys_mask (kvm)); +} +#include <asm/kvm_pgtable.h> #include <asm/stage2_pgtable.h>
arch/arm64/kvm/vgic/vgic-kvm-device.c +1 -1
@@ -27,7 +27,7 @@ int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr,if (addr + size < addr)return -EINVAL ; -if (addr & ~kvm_phys_mask (kvm) || addr + size >kvm_phys_size (kvm)) +if (!kvm_ipa_valid (kvm, addr) || addr + size >kvm_phys_size (kvm))return -E2BIG ;return 0 ;
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
Re: [PATCH v3 02/19] KVM: arm64: Create a helper to check if IPA is valid
Quoted 42 lines · Oliver Upton
Create a helper that tests if a given IPA fits within the guest's address space.
Signed-off-by Oliver Upton <[email protected]>--- arch/arm64/include/asm/kvm_mmu.h | 9 +++++++++ arch/arm64/kvm/vgic/vgic-kvm-device.c | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-)arch/arm64/include/asm/kvm_mmu.h +9
-0@@ -111,6 +111,7 @@ alternative_cb_end#else #include <linux/pgtable.h> +#include <linux/kvm_host.h> #include <asm/pgalloc.h> #include <asm/cache.h> #include <asm/cacheflush.h> @@ -147,6 +148,14 @@ static __always_inline unsigned long __kern_hyp_va(unsigned long v)#define kvm_phys_size (kvm) (_AC(1, ULL) << kvm_phys_shift(kvm))#define kvm_phys_mask (kvm) (kvm_phys_size(kvm) - _AC(1, ULL)) +/* +* Returns true if the provided IPA exists within the VM's IPA space. +*/ +static inline bool kvm_ipa_valid (struct kvm *kvm,phys_addr_t guest_ipa) +{ +return !(guest_ipa & ~kvm_phys_mask (kvm)); +} +#include <asm/kvm_pgtable.h> #include <asm/stage2_pgtable.h> arch/arm64/kvm/vgic/vgic-kvm-device.c +0
-0
arch/arm64/kvm/vgic/vgic-kvm-device.c int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr, · line 33
Quoted 8 lines
arch/arm64/kvm/vgic/vgic-kvm-device.c +1
-1@@ -27,7 +27,7 @@ int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr,if (addr + size < addr)return -EINVAL ; -if (addr & ~kvm_phys_mask (kvm) || addr + size >kvm_phys_size (kvm)) +if (!kvm_ipa_valid (kvm, addr) || addr + size >kvm_phys_size (kvm))return -E2BIG ;return 0 ;
It looks like we can use the helper for kvm_handle_guest_abort() in arch/arm64/kvm/mmu.c as well though.
----------
<...>
/* Userspace should not be able to register out-of-bounds IPAs */
VM_BUG_ON(fault_ipa >= kvm_phys_size(vcpu->kvm));<...>
----------
Thanks,
Reiji
Marc Zyngier
maintainerRe: [PATCH v3 02/19] KVM: arm64: Create a helper to check if IPA is valid
In reply to Oliver UptonQuoted 15 lines · Oliver Upton
Create a helper that tests if a given IPA fits within the guest's address space.
Signed-off-by Oliver Upton <[email protected]>--- arch/arm64/include/asm/kvm_mmu.h | 9 +++++++++ arch/arm64/kvm/vgic/vgic-kvm-device.c | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-)arch/arm64/include/asm/kvm_mmu.h +0
-0
arch/arm64/include/asm/kvm_mmu.h alternative_cb_end · line 114
Quoted 4 lines
arch/arm64/include/asm/kvm_mmu.h +1
-0@@ -111,6 +111,7 @@ alternative_cb_end#else #include <linux/pgtable.h> +#include <linux/kvm_host.h>
I'd rather you avoid that. This sort of linux->asm->linux transitive inclusions always lead to a terrible mess at some point. Which is why we use #defines below. And yes, the pgtable.h inclusion is a bad precedent.
Quoted 5 lines
arch/arm64/include/asm/kvm_mmu.h +0
-0#include <asm/pgalloc.h> #include <asm/cache.h> #include <asm/cacheflush.h> @@ -147,6 +148,14 @@ static __always_inline unsigned long __kern_hyp_va(unsigned long v)#define kvm_phys_size (kvm) (_AC(1, ULL) << kvm_phys_shift(kvm))
arch/arm64/include/asm/kvm_mmu.h static __always_inline unsigned long __kern_hyp_va(unsigned long v) · line 158
Quoted 10 lines
arch/arm64/include/asm/kvm_mmu.h +8
-0#define kvm_phys_mask (kvm) (kvm_phys_size(kvm) - _AC(1, ULL)) +/* +* Returns true if the provided IPA exists within the VM's IPA space. +*/ +static inline bool kvm_ipa_valid (struct kvm *kvm,phys_addr_t guest_ipa) +{ +return !(guest_ipa & ~kvm_phys_mask (kvm)); +} +
I'm all for the helper, but just make it a #define to be consistent with the rest of the code.
Quoted 8 lines
arch/arm64/include/asm/kvm_mmu.h +0
-0#include <asm/kvm_pgtable.h> #include <asm/stage2_pgtable.h> arch/arm64/kvm/vgic/vgic-kvm-device.c +0
-0
arch/arm64/kvm/vgic/vgic-kvm-device.c int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr, · line 31
Quoted 6 lines
arch/arm64/kvm/vgic/vgic-kvm-device.c +1
-1@@ -27,7 +27,7 @@ int vgic_check_iorange(struct kvm *kvm, phys_addr_t ioaddr,if (addr + size < addr)return -EINVAL ; -if (addr & ~kvm_phys_mask (kvm) || addr + size >kvm_phys_size (kvm)) +if (!kvm_ipa_valid (kvm, addr) || addr + size >kvm_phys_size (kvm))return -E2BIG ;
I think you can pretty much use this helper everywhere something is compared to kvm_phys_size(), and the above becomes:
if (!kvm_ipa_valid(kvm, addr) || !kvm_ipa_valid(kvm, addr + size - 1))
Same this goes for the couple of occurrences in arch/arm64/kvm/mmu.c.
Thanks,
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
PATCH v3 3/19 KVM: arm64: Reject invalid addresses for CPU_ON PSCI call
In reply to Oliver UptonDEN0022D.b 5.6.2 "Caller responsibilities" states that a PSCI implementation may return INVALID_ADDRESS for the CPU_ON call if the provided entry address is known to be invalid. There is an additional caveat to this rule. Prior to PSCI v1.0, the INVALID_PARAMETERS error is returned instead. Check the guest's PSCI version and return the appropriate error if the IPA is invalid.
--- arch/arm64/kvm/psci.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-)
arch/arm64/kvm/psci.c +22 -2
@@ -12,6 +12,7 @@#include <asm/cputype.h> #include <asm/kvm_emulate.h> +#include <asm/kvm_mmu.h> #include <kvm/arm_psci.h> #include <kvm/arm_hypercalls.h>
@@ -70,12 +71,31 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)struct vcpu_reset_state *reset_state;struct kvm *kvm = source_vcpu->kvm;struct kvm_vcpu *vcpu =NULL ; -unsigned long cpu_id; +unsigned long cpu_id, entry_addr; cpu_id =smccc_get_arg1 (source_vcpu);if (!kvm_psci_valid_affinity (source_vcpu, cpu_id))return PSCI_RET_INVALID_PARAMS ; +/* +* Basic sanity check: ensure the requested entry address actually +* exists within the guest's address space. +*/ + entry_addr =smccc_get_arg2 (source_vcpu); +if (!kvm_ipa_valid (kvm, entry_addr)) { + +/* +* Before PSCI v1.0, the INVALID_PARAMETERS error is returned +* instead of INVALID_ADDRESS. +* +* For more details, see ARM DEN0022D.b 5.6 "CPU_ON". +*/ +if (kvm_psci_version (source_vcpu) <KVM_ARM_PSCI_1_0 ) +return PSCI_RET_INVALID_PARAMS ; +else +return PSCI_RET_INVALID_ADDRESS ; + } + vcpu =kvm_mpidr_to_vcpu (kvm, cpu_id);/*
@@ -93,7 +113,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) reset_state = &vcpu->arch.reset_state; - reset_state->pc =smccc_get_arg2 (source_vcpu); + reset_state->pc = entry_addr;/* Propagate caller endianness */ reset_state->be =kvm_vcpu_is_be (source_vcpu);
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
Re: [PATCH v3 03/19] KVM: arm64: Reject invalid addresses for CPU_ON PSCI call
Quoted 10 lines · Oliver Upton
DEN0022D.b 5.6.2 "Caller responsibilities" states that a PSCI implementation may return
INVALID_ADDRESSfor theCPU_ONcall if the provided entry address is known to be invalid. There is an additional caveat to this rule. Prior to PSCI v1.0, theINVALID_PARAMETERSerror is returned instead. Check the guest's PSCI version and return the appropriate error if the IPA is invalid.Reported-by Reiji Watanabe <[email protected]>Signed-off-by Oliver Upton <[email protected]>
Marc Zyngier
maintainerRe: [PATCH v3 03/19] KVM: arm64: Reject invalid addresses for CPU_ON PSCI call
In reply to Oliver UptonQuoted 46 lines · Oliver Upton
DEN0022D.b 5.6.2 "Caller responsibilities" states that a PSCI implementation may return
INVALID_ADDRESSfor theCPU_ONcall if the provided entry address is known to be invalid. There is an additional caveat to this rule. Prior to PSCI v1.0, theINVALID_PARAMETERSerror is returned instead. Check the guest's PSCI version and return the appropriate error if the IPA is invalid.Reported-by Reiji Watanabe <[email protected]>Signed-off-by Oliver Upton <[email protected]>--- arch/arm64/kvm/psci.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-)arch/arm64/kvm/psci.c +11
-1@@ -12,6 +12,7 @@#include <asm/cputype.h> #include <asm/kvm_emulate.h> +#include <asm/kvm_mmu.h> #include <kvm/arm_psci.h> #include <kvm/arm_hypercalls.h> @@ -70,12 +71,31 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)struct vcpu_reset_state *reset_state;struct kvm *kvm = source_vcpu->kvm;struct kvm_vcpu *vcpu =NULL ; -unsigned long cpu_id; +unsigned long cpu_id, entry_addr; cpu_id =smccc_get_arg1 (source_vcpu);if (!kvm_psci_valid_affinity (source_vcpu, cpu_id))return PSCI_RET_INVALID_PARAMS ; +/* +* Basic sanity check: ensure the requested entry address actually +* exists within the guest's address space. +*/ + entry_addr =smccc_get_arg2 (source_vcpu); +if (!kvm_ipa_valid (kvm, entry_addr)) { + +/* +* Before PSCI v1.0, the INVALID_PARAMETERS error is returned
arch/arm64/kvm/psci.c static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) · line 98
Quoted 10 lines
arch/arm64/kvm/psci.c +10
-0+* instead of INVALID_ADDRESS. +* +* For more details, see ARM DEN0022D.b 5.6 "CPU_ON". +*/ +if (kvm_psci_version (source_vcpu) <KVM_ARM_PSCI_1_0 ) +return PSCI_RET_INVALID_PARAMS ; +else +return PSCI_RET_INVALID_ADDRESS ; + } +
If you're concerned with this, should you also check for the PC alignment, or the presence of a memslot covering the address you are branching to? Le latter is particularly hard to implement reliably.
So far, my position has been that the guest is free to shoot itself in the foot if that's what it wants to do, and that babysitting it was a waste of useful bits! ;-)
Or have you identified something that makes it a requirement to handle this case (and possibly others) in the hypervisor?
Thanks,
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
Re: [PATCH v3 03/19] KVM: arm64: Reject invalid addresses for CPU_ON PSCI call
Hi Marc,
Quoted 54 lines · Marc Zyngier
Quoted 52 lines · Oliver Upton
DEN0022D.b 5.6.2 "Caller responsibilities" states that a PSCI implementation may return
INVALID_ADDRESSfor theCPU_ONcall if the provided entry address is known to be invalid. There is an additional caveat to this rule. Prior to PSCI v1.0, theINVALID_PARAMETERSerror is returned instead. Check the guest's PSCI version and return the appropriate error if the IPA is invalid.Reported-by Reiji Watanabe <[email protected]>Signed-off-by Oliver Upton <[email protected]>--- arch/arm64/kvm/psci.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-)arch/arm64/kvm/psci.c +17
-1@@ -12,6 +12,7 @@#include <asm/cputype.h> #include <asm/kvm_emulate.h> +#include <asm/kvm_mmu.h> #include <kvm/arm_psci.h> #include <kvm/arm_hypercalls.h> @@ -70,12 +71,31 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)struct vcpu_reset_state *reset_state;struct kvm *kvm = source_vcpu->kvm;struct kvm_vcpu *vcpu =NULL ; -unsigned long cpu_id; +unsigned long cpu_id, entry_addr; cpu_id =smccc_get_arg1 (source_vcpu);if (!kvm_psci_valid_affinity (source_vcpu, cpu_id))return PSCI_RET_INVALID_PARAMS ; +/* +* Basic sanity check: ensure the requested entry address actually +* exists within the guest's address space. +*/ + entry_addr =smccc_get_arg2 (source_vcpu); +if (!kvm_ipa_valid (kvm, entry_addr)) { + +/* +* Before PSCI v1.0, the INVALID_PARAMETERS error is returned +* instead of INVALID_ADDRESS. +* +* For more details, see ARM DEN0022D.b 5.6 "CPU_ON". +*/ +if (kvm_psci_version (source_vcpu) <KVM_ARM_PSCI_1_0 ) +return PSCI_RET_INVALID_PARAMS ;
Quoted 8 lines
arch/arm64/kvm/psci.c static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) · line 98
Quoted 4 lines
arch/arm64/kvm/psci.c +4
-0+else +return PSCI_RET_INVALID_ADDRESS ; + } +If you're concerned with this, should you also check for the PC alignment, or the presence of a memslot covering the address you are branching to? Le latter is particularly hard to implement reliably.
Andrew, Reiji and I had a conversation regarding exactly this on the last run of this series, and concluded that checking against the IPA is probably the best KVM can do [1]. That said, alignment is also an easy thing to check.
Quoted 4 lines
So far, my position has been that the guest is free to shoot itself in the foot if that's what it wants to do, and that babysitting it was a waste of useful bits! ;-)
Agreed -- there are plenty of spectacular/hilarious ways in which the guest can mess up :-)
Quoted 2 lines
Or have you identified something that makes it a requirement to handle this case (and possibly others) in the hypervisor?
It is a lot easier to tell a guest that their software is broken if they get an error back from the hypercall, whereas a vCPU off in the weeds might need to be looked at before concluding there's a guest issue.
[1]: http://lore.kernel.org/r/20211005190153.dc2befzcisvznxq5 at gator.home
--
Oliver
Marc Zyngier
maintainerRe: [PATCH v3 03/19] KVM: arm64: Reject invalid addresses for CPU_ON PSCI call
Quoted 67 lines · Oliver Upton
Hi Marc,
Quoted 54 lines · Marc Zyngier
Quoted 52 lines · Oliver Upton
DEN0022D.b 5.6.2 "Caller responsibilities" states that a PSCI implementation may return
INVALID_ADDRESSfor theCPU_ONcall if the provided entry address is known to be invalid. There is an additional caveat to this rule. Prior to PSCI v1.0, theINVALID_PARAMETERSerror is returned instead. Check the guest's PSCI version and return the appropriate error if the IPA is invalid.Reported-by Reiji Watanabe <[email protected]>Signed-off-by Oliver Upton <[email protected]>--- arch/arm64/kvm/psci.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-)arch/arm64/kvm/psci.c +17
-1@@ -12,6 +12,7 @@#include <asm/cputype.h> #include <asm/kvm_emulate.h> +#include <asm/kvm_mmu.h> #include <kvm/arm_psci.h> #include <kvm/arm_hypercalls.h> @@ -70,12 +71,31 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)struct vcpu_reset_state *reset_state;struct kvm *kvm = source_vcpu->kvm;struct kvm_vcpu *vcpu =NULL ; -unsigned long cpu_id; +unsigned long cpu_id, entry_addr; cpu_id =smccc_get_arg1 (source_vcpu);if (!kvm_psci_valid_affinity (source_vcpu, cpu_id))return PSCI_RET_INVALID_PARAMS ; +/* +* Basic sanity check: ensure the requested entry address actually +* exists within the guest's address space. +*/ + entry_addr =smccc_get_arg2 (source_vcpu); +if (!kvm_ipa_valid (kvm, entry_addr)) { + +/* +* Before PSCI v1.0, the INVALID_PARAMETERS error is returned +* instead of INVALID_ADDRESS. +* +* For more details, see ARM DEN0022D.b 5.6 "CPU_ON". +*/ +if (kvm_psci_version (source_vcpu) <KVM_ARM_PSCI_1_0 ) +return PSCI_RET_INVALID_PARAMS ;Quoted 8 lines
arch/arm64/kvm/psci.c static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) · line 98
Quoted 4 lines
arch/arm64/kvm/psci.c +4
-0+else +return PSCI_RET_INVALID_ADDRESS ; + } +If you're concerned with this, should you also check for the PC alignment, or the presence of a memslot covering the address you are branching to? Le latter is particularly hard to implement reliably.
Quoted 4 lines
Andrew, Reiji and I had a conversation regarding exactly this on the last run of this series, and concluded that checking against the IPA is probably the best KVM can do [1]. That said, alignment is also an easy thing to check.
Until you look at Thumb-2 ;-)
Quoted 9 lines
Quoted 5 lines
So far, my position has been that the guest is free to shoot itself in the foot if that's what it wants to do, and that babysitting it was a waste of useful bits! ;-)
Agreed -- there are plenty of spectacular/hilarious ways in which the guest can mess up :-)
Quoted 6 lines
Quoted 2 lines
Or have you identified something that makes it a requirement to handle this case (and possibly others) in the hypervisor?
It is a lot easier to tell a guest that their software is broken if they get an error back from the hypercall, whereas a vCPU off in the weeds might need to be looked at before concluding there's a guest issue.
Fair enough. I'm not fundamentally against this patch. It is just a bit out of context in this series.
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
PATCH v3 4/19 KVM: arm64: Clean up SMC64 PSCI filtering for AArch32 guests
In reply to Oliver UptonThe only valid calling SMC calling convention from an AArch32 state is SMC32. Disallow any PSCI function that sets the SMC64 function ID bit when called from AArch32 rather than comparing against known SMC64 PSCI functions.
--- arch/arm64/kvm/psci.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-)
arch/arm64/kvm/psci.c +5 -9
@@ -229,15 +229,11 @@ static void kvm_psci_narrow_to_32bit(struct kvm_vcpu *vcpu)static unsigned long kvm_psci_check_allowed_function (struct kvm_vcpu *vcpu,u32 fn) { -switch (fn) { -case PSCI_0_2_FN64_CPU_SUSPEND : -case PSCI_0_2_FN64_CPU_ON : -case PSCI_0_2_FN64_AFFINITY_INFO : -/* Disallow these functions for 32bit guests */ -if (vcpu_mode_is_32bit (vcpu)) -return PSCI_RET_NOT_SUPPORTED ; -break ; - } +/* +* Prevent 32 bit guests from calling 64 bit PSCI functions. +*/ +if ((fn &PSCI_0_2_64BIT ) &&vcpu_mode_is_32bit (vcpu)) +return PSCI_RET_NOT_SUPPORTED ;return 0 ; }
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
PATCH v3 5/19 KVM: arm64: Dedupe vCPU power off helpers
In reply to Oliver Uptonvcpu_power_off() and kvm_psci_vcpu_off() are equivalent; rename the former and replace all callsites to the latter.
No functional change intended.
--- arch/arm64/include/asm/kvm_host.h | 2 ++ arch/arm64/kvm/arm.c | 6 +++--- arch/arm64/kvm/psci.c | 11 ++--------- 3 files changed, 7 insertions(+), 12 deletions(-)
arch/arm64/include/asm/kvm_host.h +2 -0
@@ -799,4 +799,6 @@ void __init kvm_hyp_reserve(void);static inline void kvm_hyp_reserve (void ) { }#endif +void kvm_arm_vcpu_power_off (struct kvm_vcpu *vcpu); +#endif /* __ARM64_KVM_HOST_H__ */
arch/arm64/kvm/arm.c +3 -3
@@ -426,7 +426,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) vcpu->cpu =-1 ; } -static void vcpu_power_off (struct kvm_vcpu *vcpu) +void kvm_arm_vcpu_power_off (struct kvm_vcpu *vcpu) { vcpu->arch.power_off = true;kvm_make_request (KVM_REQ_SLEEP , vcpu);
@@ -454,7 +454,7 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, vcpu->arch.power_off = false;break ;case KVM_MP_STATE_STOPPED : -vcpu_power_off (vcpu); +kvm_arm_vcpu_power_off (vcpu);break ;default : ret = -EINVAL ;
@@ -1179,7 +1179,7 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,* Handle the "start in power-off" case. */ if (test_bit (KVM_ARM_VCPU_POWER_OFF , vcpu->arch.features)) -vcpu_power_off (vcpu); +kvm_arm_vcpu_power_off (vcpu);else vcpu->arch.power_off = false;
arch/arm64/kvm/psci.c +2 -9
@@ -53,13 +53,6 @@ static unsigned long kvm_psci_vcpu_suspend(struct kvm_vcpu *vcpu)return PSCI_RET_SUCCESS ; } -static void kvm_psci_vcpu_off (struct kvm_vcpu *vcpu) -{ - vcpu->arch.power_off = true; -kvm_make_request (KVM_REQ_SLEEP , vcpu); -kvm_vcpu_kick (vcpu); -} -static inline bool kvm_psci_valid_affinity (struct kvm_vcpu *vcpu,unsigned long affinity) {
@@ -262,7 +255,7 @@ static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu) val =kvm_psci_vcpu_suspend (vcpu);break ;case PSCI_0_2_FN_CPU_OFF : -kvm_psci_vcpu_off (vcpu); +kvm_arm_vcpu_power_off (vcpu); val =PSCI_RET_SUCCESS ;break ;case PSCI_0_2_FN_CPU_ON :
@@ -375,7 +368,7 @@ static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)switch (psci_fn) {case KVM_PSCI_FN_CPU_OFF : -kvm_psci_vcpu_off (vcpu); +kvm_arm_vcpu_power_off (vcpu); val =PSCI_RET_SUCCESS ;break ;case KVM_PSCI_FN_CPU_ON :
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
Re: [PATCH v3 05/19] KVM: arm64: Dedupe vCPU power off helpers
Quoted 7 lines · Oliver Upton
vcpu_power_off()andkvm_psci_vcpu_off()are equivalent; rename the former and replace all callsites to the latter.No functional change intended.
Signed-off-by Oliver Upton <[email protected]>
PATCH v3 6/19 KVM: arm64: Track vCPU power state using MP state values
In reply to Oliver UptonA subsequent change to KVM will add support for additional power states. Store the MP state by value rather than keeping track of it as a boolean.
No functional change intended.
--- arch/arm64/include/asm/kvm_host.h | 5 +++-- arch/arm64/kvm/arm.c | 22 ++++++++++++---------- arch/arm64/kvm/psci.c | 10 +++++----- 3 files changed, 20 insertions(+), 17 deletions(-)
arch/arm64/include/asm/kvm_host.h +3 -2
@@ -350,8 +350,8 @@ struct kvm_vcpu_arch {u32 mdscr_el1; } guest_debug_preserved; -/* vcpu power-off state */ -bool power_off; +/* vcpu power state */ +u32 mp_state;/* Don't run the guest (internal implementation need) */ bool pause;
@@ -800,5 +800,6 @@ static inline void kvm_hyp_reserve(void) { }#endif void kvm_arm_vcpu_power_off (struct kvm_vcpu *vcpu); +bool kvm_arm_vcpu_powered_off (struct kvm_vcpu *vcpu);#endif /* __ARM64_KVM_HOST_H__ */
arch/arm64/kvm/arm.c +12 -10
@@ -428,18 +428,20 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)void kvm_arm_vcpu_power_off (struct kvm_vcpu *vcpu) { - vcpu->arch.power_off = true; + vcpu->arch.mp_state =KVM_MP_STATE_STOPPED ;kvm_make_request (KVM_REQ_SLEEP , vcpu);kvm_vcpu_kick (vcpu); } +bool kvm_arm_vcpu_powered_off (struct kvm_vcpu *vcpu) +{ +return vcpu->arch.mp_state ==KVM_MP_STATE_STOPPED ; +} +int kvm_arch_vcpu_ioctl_get_mpstate (struct kvm_vcpu *vcpu,struct kvm_mp_state *mp_state) { -if (vcpu->arch.power_off) - mp_state->mp_state =KVM_MP_STATE_STOPPED ; -else - mp_state->mp_state =KVM_MP_STATE_RUNNABLE ; + mp_state->mp_state = vcpu->arch.mp_state;return 0 ; }
@@ -451,7 +453,7 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,switch (mp_state->mp_state) {case KVM_MP_STATE_RUNNABLE : - vcpu->arch.power_off = false; + vcpu->arch.mp_state = mp_state->mp_state;break ;case KVM_MP_STATE_STOPPED :kvm_arm_vcpu_power_off (vcpu);
@@ -474,7 +476,7 @@ int kvm_arch_vcpu_runnable(struct kvm_vcpu *v) {bool irq_lines = *vcpu_hcr (v) & (HCR_VI |HCR_VF );return ((irq_lines ||kvm_vgic_vcpu_pending_irq (v)) - && !v->arch.power_off && !v->arch.pause); + && !kvm_arm_vcpu_powered_off (v) && !v->arch.pause); }bool kvm_arch_vcpu_in_kernel (struct kvm_vcpu *vcpu)
@@ -668,10 +670,10 @@ static void vcpu_req_sleep(struct kvm_vcpu *vcpu)struct rcuwait *wait =kvm_arch_vcpu_get_wait (vcpu);rcuwait_wait_event (wait, - (!vcpu->arch.power_off) &&(!vcpu->arch.pause), + (!kvm_arm_vcpu_powered_off (vcpu)) && (!vcpu->arch.pause),TASK_INTERRUPTIBLE ); -if (vcpu->arch.power_off || vcpu->arch.pause) { +if (kvm_arm_vcpu_powered_off (vcpu) || vcpu->arch.pause) {/* Awaken to handle a signal, request we sleep again later. */ kvm_make_request (KVM_REQ_SLEEP , vcpu); }
@@ -1181,7 +1183,7 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,if (test_bit (KVM_ARM_VCPU_POWER_OFF , vcpu->arch.features))kvm_arm_vcpu_power_off (vcpu);else - vcpu->arch.power_off = false; + vcpu->arch.mp_state =KVM_MP_STATE_RUNNABLE ;return 0 ; }
arch/arm64/kvm/psci.c +5 -5
@@ -97,7 +97,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)*/ if (!vcpu)return PSCI_RET_INVALID_PARAMS ; -if (!vcpu->arch.power_off) { +if (!kvm_arm_vcpu_powered_off (vcpu)) {if (kvm_psci_version (source_vcpu) !=KVM_ARM_PSCI_0_1 )return PSCI_RET_ALREADY_ON ;else
@@ -122,11 +122,11 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)/* * Make sure the reset request is observed if the change to -* power_off is observed. +* mp_state is observed. */ smp_wmb (); - vcpu->arch.power_off = false; + vcpu->arch.mp_state =KVM_MP_STATE_RUNNABLE ;kvm_vcpu_wake_up (vcpu);return PSCI_RET_SUCCESS ;
@@ -164,7 +164,7 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu) mpidr =kvm_vcpu_get_mpidr_aff (tmp);if ((mpidr & target_affinity_mask) == target_affinity) { matching_cpus++; -if (!tmp->arch.power_off) +if (!kvm_arm_vcpu_powered_off (tmp))return PSCI_0_2_AFFINITY_LEVEL_ON ; } }
@@ -190,7 +190,7 @@ static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type)* re-initialized. */ kvm_for_each_vcpu (i, tmp, vcpu->kvm) - tmp->arch.power_off = true; + tmp->arch.mp_state =KVM_MP_STATE_STOPPED ;kvm_make_all_cpus_request (vcpu->kvm,KVM_REQ_SLEEP );memset (&vcpu->run->system_event,0 ,sizeof (vcpu->run->system_event));
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
Marc Zyngier
maintainerRe: [PATCH v3 06/19] KVM: arm64: Track vCPU power state using MP state values
Quoted 19 lines · Oliver Upton
A subsequent change to KVM will add support for additional power states. Store the MP state by value rather than keeping track of it as a boolean.
No functional change intended.
Signed-off-by Oliver Upton <[email protected]>--- arch/arm64/include/asm/kvm_host.h | 5 +++-- arch/arm64/kvm/arm.c | 22 ++++++++++++---------- arch/arm64/kvm/psci.c | 10 +++++----- 3 files changed, 20 insertions(+), 17 deletions(-)arch/arm64/include/asm/kvm_host.h +0
-0
arch/arm64/include/asm/kvm_host.h struct kvm_vcpu_arch { · line 354
Quoted 7 lines
arch/arm64/include/asm/kvm_host.h +2
-2@@ -350,8 +350,8 @@ struct kvm_vcpu_arch {u32 mdscr_el1; } guest_debug_preserved; -/* vcpu power-off state */ -bool power_off; +/* vcpu power state */ +u32 mp_state;
nit: why don't you just carry a kvm_mp_state structure instead of open-coding a u32? Same size, stronger typing.
Quoted 17 lines
arch/arm64/include/asm/kvm_host.h +1
-0/* Don't run the guest (internal implementation need) */ bool pause;@@ -800,5 +800,6 @@ static inline void kvm_hyp_reserve(void) { }#endif void kvm_arm_vcpu_power_off (struct kvm_vcpu *vcpu); +bool kvm_arm_vcpu_powered_off (struct kvm_vcpu *vcpu);#endif /* __ARM64_KVM_HOST_H__ */ arch/arm64/kvm/arm.c +0
-0@@ -428,18 +428,20 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)void kvm_arm_vcpu_power_off (struct kvm_vcpu *vcpu)
arch/arm64/kvm/arm.c void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) · line 438
Quoted 10 lines
arch/arm64/kvm/arm.c +4
-1{ - vcpu->arch.power_off = true; + vcpu->arch.mp_state =KVM_MP_STATE_STOPPED ;kvm_make_request (KVM_REQ_SLEEP , vcpu);kvm_vcpu_kick (vcpu); } +bool kvm_arm_vcpu_powered_off (struct kvm_vcpu *vcpu) +{ +return vcpu->arch.mp_state ==KVM_MP_STATE_STOPPED ;
nit: if we're fully embracing the MP_STATE concept, just renamed this to kvm_arm_vcpu_stopped().
Quoted 67 lines
arch/arm64/kvm/arm.c +8
-9+} +int kvm_arch_vcpu_ioctl_get_mpstate (struct kvm_vcpu *vcpu,struct kvm_mp_state *mp_state) { -if (vcpu->arch.power_off) - mp_state->mp_state =KVM_MP_STATE_STOPPED ; -else - mp_state->mp_state =KVM_MP_STATE_RUNNABLE ; + mp_state->mp_state = vcpu->arch.mp_state;return 0 ; }@@ -451,7 +453,7 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,switch (mp_state->mp_state) {case KVM_MP_STATE_RUNNABLE : - vcpu->arch.power_off = false; + vcpu->arch.mp_state = mp_state->mp_state;break ;case KVM_MP_STATE_STOPPED :kvm_arm_vcpu_power_off (vcpu);@@ -474,7 +476,7 @@ int kvm_arch_vcpu_runnable(struct kvm_vcpu *v) {bool irq_lines = *vcpu_hcr (v) & (HCR_VI |HCR_VF );return ((irq_lines ||kvm_vgic_vcpu_pending_irq (v)) - && !v->arch.power_off && !v->arch.pause); + && !kvm_arm_vcpu_powered_off (v) && !v->arch.pause); }bool kvm_arch_vcpu_in_kernel (struct kvm_vcpu *vcpu)@@ -668,10 +670,10 @@ static void vcpu_req_sleep(struct kvm_vcpu *vcpu)struct rcuwait *wait =kvm_arch_vcpu_get_wait (vcpu);rcuwait_wait_event (wait, - (!vcpu->arch.power_off) &&(!vcpu->arch.pause), + (!kvm_arm_vcpu_powered_off (vcpu)) && (!vcpu->arch.pause),TASK_INTERRUPTIBLE ); -if (vcpu->arch.power_off || vcpu->arch.pause) { +if (kvm_arm_vcpu_powered_off (vcpu) || vcpu->arch.pause) {/* Awaken to handle a signal, request we sleep again later. */ kvm_make_request (KVM_REQ_SLEEP , vcpu); }@@ -1181,7 +1183,7 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,if (test_bit (KVM_ARM_VCPU_POWER_OFF , vcpu->arch.features))kvm_arm_vcpu_power_off (vcpu);else - vcpu->arch.power_off = false; + vcpu->arch.mp_state =KVM_MP_STATE_RUNNABLE ;return 0 ; }arch/arm64/kvm/psci.c +1
-1@@ -97,7 +97,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)*/ if (!vcpu)return PSCI_RET_INVALID_PARAMS ; -if (!vcpu->arch.power_off) { +if (!kvm_arm_vcpu_powered_off (vcpu)) {if (kvm_psci_version (source_vcpu) !=KVM_ARM_PSCI_0_1 )return PSCI_RET_ALREADY_ON ;else
arch/arm64/kvm/psci.c static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) · line 125
Quoted 5 lines
arch/arm64/kvm/psci.c +1
-1@@ -122,11 +122,11 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)/* * Make sure the reset request is observed if the change to -* power_off is observed. +* mp_state is observed.
You want to expand this comment a bit, as this is not strictly a binary state anymore.
Quoted 18 lines
arch/arm64/kvm/psci.c +2
-2*/ smp_wmb (); - vcpu->arch.power_off = false; + vcpu->arch.mp_state =KVM_MP_STATE_RUNNABLE ;kvm_vcpu_wake_up (vcpu);return PSCI_RET_SUCCESS ;@@ -164,7 +164,7 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu) mpidr =kvm_vcpu_get_mpidr_aff (tmp);if ((mpidr & target_affinity_mask) == target_affinity) { matching_cpus++; -if (!tmp->arch.power_off) +if (!kvm_arm_vcpu_powered_off (tmp))return PSCI_0_2_AFFINITY_LEVEL_ON ; } }
arch/arm64/kvm/psci.c static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type) · line 196
Quoted 8 lines
arch/arm64/kvm/psci.c +1
-1@@ -190,7 +190,7 @@ static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type)* re-initialized. */ kvm_for_each_vcpu (i, tmp, vcpu->kvm) - tmp->arch.power_off = true; + tmp->arch.mp_state =KVM_MP_STATE_STOPPED ;kvm_make_all_cpus_request (vcpu->kvm,KVM_REQ_SLEEP );memset (&vcpu->run->system_event,0 ,sizeof (vcpu->run->system_event));
You also may want to initialise the mp_state to RUNNABLE by default in kvm_arch_vcpu_create(). We are currently relying on power_off to be false thanks to the vcpu struct being zeroed, but we may as well make it clearer (RUNNABLE is also 0, so there is no actual bug here).
Otherwise, looks good.
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
Re: [PATCH v3 06/19] KVM: arm64: Track vCPU power state using MP state values
Hi Marc,
On Thu, Feb 24, 2022 at 01:25:04PM +0000, Marc Zyngier wrote:
[...]
Quoted 8 lines
Quoted 8 lines
arch/arm64/kvm/psci.c +1
-1@@ -190,7 +190,7 @@ static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type)* re-initialized. */ kvm_for_each_vcpu (i, tmp, vcpu->kvm) - tmp->arch.power_off = true; + tmp->arch.mp_state =KVM_MP_STATE_STOPPED ;kvm_make_all_cpus_request (vcpu->kvm,KVM_REQ_SLEEP );
Quoted 6 lines
arch/arm64/kvm/psci.c static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type) · line 196
Quoted 1 line
arch/arm64/kvm/psci.c +0
-0memset (&vcpu->run->system_event,0 ,sizeof (vcpu->run->system_event));You also may want to initialise the
mp_stateto RUNNABLE by default inkvm_arch_vcpu_create(). We are currently relying onpower_offto be false thanks to the vcpu struct being zeroed, but we may as well make it clearer (RUNNABLE is also 0, so there is no actual bug here).
We unconditionally initialize power_off in kvm_arch_vcpu_ioctl_vcpu_init(), and do the same in this patch for mp_state, depending on if KVM_ARM_VCPU_POWER_OFF is set.
Any objections to leaving that as-is? I can move the RUNNABLE case into kvm_arch_vcpu_create() as you've suggested, too.
--
Thanks,
Oliver
Marc Zyngier
maintainerRe: [PATCH v3 06/19] KVM: arm64: Track vCPU power state using MP state values
Quoted 22 lines · Oliver Upton
Hi Marc,
On Thu, Feb 24, 2022 at 01:25:04PM +0000, Marc Zyngier wrote:
[...]
Quoted 8 lines
Quoted 8 lines
arch/arm64/kvm/psci.c +1
-1@@ -190,7 +190,7 @@ static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type)* re-initialized. */ kvm_for_each_vcpu (i, tmp, vcpu->kvm) - tmp->arch.power_off = true; + tmp->arch.mp_state =KVM_MP_STATE_STOPPED ;kvm_make_all_cpus_request (vcpu->kvm,KVM_REQ_SLEEP );Quoted 6 lines
arch/arm64/kvm/psci.c static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type) · line 196
Quoted 1 line
arch/arm64/kvm/psci.c +0
-0memset (&vcpu->run->system_event,0 ,sizeof (vcpu->run->system_event));You also may want to initialise the
mp_stateto RUNNABLE by default inkvm_arch_vcpu_create(). We are currently relying onpower_offto be false thanks to the vcpu struct being zeroed, but we may as well make it clearer (RUNNABLE is also 0, so there is no actual bug here).
Quoted 3 lines
We unconditionally initialize
power_offinkvm_arch_vcpu_ioctl_vcpu_init(), and do the same in this patch formp_state, depending on ifKVM_ARM_VCPU_POWER_OFFis set.
Ah, I missed that. Thanks for the heads up.
Quoted 2 lines
Any objections to leaving that as-is? I can move the RUNNABLE case into
kvm_arch_vcpu_create()as you've suggested, too.
No, that's just a brain fart on my part. Leave it as is.
Thanks,
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
PATCH v3 7/19 KVM: arm64: Rename the KVM_REQ_SLEEP handler
In reply to Oliver UptonThe naming of the kvm_req_sleep function is confusing: the function itself sleeps the vCPU, it does not request such an event. Rename the function to make its purpose more clear.
No functional change intended.
--- arch/arm64/kvm/arm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/kvm/arm.c +2 -2
@@ -665,7 +665,7 @@ void kvm_arm_resume_guest(struct kvm *kvm) } } -static void vcpu_req_sleep (struct kvm_vcpu *vcpu) +static void kvm_vcpu_sleep (struct kvm_vcpu *vcpu) {struct rcuwait *wait =kvm_arch_vcpu_get_wait (vcpu);
@@ -723,7 +723,7 @@ static void check_vcpu_requests(struct kvm_vcpu *vcpu) {if (kvm_request_pending (vcpu)) {if (kvm_check_request (KVM_REQ_SLEEP , vcpu)) -vcpu_req_sleep (vcpu); +kvm_vcpu_sleep (vcpu);if (kvm_check_request (KVM_REQ_VCPU_RESET , vcpu))kvm_reset_vcpu (vcpu);
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
PATCH v3 8/19 KVM: arm64: Add reset helper that accepts caller-provided reset state
In reply to Oliver UptonTo date, struct vcpu_reset_state has been used to implement PSCI CPU_ON, as callers of this function provide context for the targeted vCPU. A subsequent change to KVM will require that a vCPU can populate its own reset context.
Extract the vCPU reset implementation into a new function to separate the locked read of shared data (vcpu->arch.reset_state) from the use of the reset context.
No functional change intended.
--- arch/arm64/include/asm/kvm_host.h | 16 ++++++----- arch/arm64/kvm/reset.c | 44 +++++++++++++++++++------------ 2 files changed, 36 insertions(+), 24 deletions(-)
arch/arm64/include/asm/kvm_host.h +9 -7
@@ -67,6 +67,15 @@ extern unsigned int kvm_sve_max_vl;int kvm_arm_init_sve (void ); u32 __attribute_const__ kvm_target_cpu(void); + +struct vcpu_reset_state { +unsigned long pc; +unsigned long r0; +bool be; +bool reset; +}; + +int __kvm_reset_vcpu (struct kvm_vcpu *vcpu,struct vcpu_reset_state *reset_state);int kvm_reset_vcpu (struct kvm_vcpu *vcpu);void kvm_arm_vcpu_destroy (struct kvm_vcpu *vcpu);
@@ -271,13 +280,6 @@ extern s64 kvm_nvhe_sym(hyp_physvirt_offset);extern u64 kvm_nvhe_sym (hyp_cpu_logical_map )[NR_CPUS ];#define hyp_cpu_logical_map CHOOSE_NVHE_SYM(hyp_cpu_logical_map) -struct vcpu_reset_state { -unsigned long pc; -unsigned long r0; -bool be; -bool reset; -}; -struct kvm_vcpu_arch {struct kvm_cpu_context ctxt;void *sve_state;
arch/arm64/kvm/reset.c +27 -17
87 lines not on this page · raw message
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
PATCH v3 9/19 KVM: arm64: Implement PSCI SYSTEM_SUSPEND
In reply to Oliver UptonARM DEN0022D.b 5.19 "SYSTEM_SUSPEND" describes a PSCI call that allows software to request that a system be placed in the deepest possible low-power state. Effectively, software can use this to suspend itself to RAM. Note that the semantics of this PSCI call are very similar to CPU_SUSPEND, which is already implemented in KVM.
Implement the SYSTEM_SUSPEND in KVM. Similar to CPU_SUSPEND, the low-power state is implemented as a guest WFI. Synchronously reset the calling CPU before entering the WFI, such that the vCPU may immediately resume execution when a wakeup event is recognized.
--- arch/arm64/kvm/psci.c | 51 ++++++++++++++++++++++++++++++++++++++++++ arch/arm64/kvm/reset.c | 3 ++- 2 files changed, 53 insertions(+), 1 deletion(-)
arch/arm64/kvm/psci.c +51 -0
@@ -208,6 +208,50 @@ static void kvm_psci_system_reset(struct kvm_vcpu *vcpu)kvm_prepare_system_event (vcpu,KVM_SYSTEM_EVENT_RESET ); } +static int kvm_psci_system_suspend (struct kvm_vcpu *vcpu) +{ +struct vcpu_reset_state reset_state; +struct kvm *kvm = vcpu->kvm; +struct kvm_vcpu *tmp; +bool denied = false; +unsigned long i; + + reset_state.pc =smccc_get_arg1 (vcpu); +if (!kvm_ipa_valid (kvm, reset_state.pc)) { +smccc_set_retval (vcpu,PSCI_RET_INVALID_ADDRESS ,0 ,0 ,0 ); +return 1 ; + } + + reset_state.r0 =smccc_get_arg2 (vcpu); + reset_state.be =kvm_vcpu_is_be (vcpu); + reset_state.reset = true; + +/* +* The SYSTEM_SUSPEND PSCI call requires that all vCPUs (except the +* calling vCPU) be in an OFF state, as determined by the +* implementation. +* +* See ARM DEN0022D, 5.19 "SYSTEM_SUSPEND" for more details. +*/ +mutex_lock (&kvm->lock); +kvm_for_each_vcpu (i, tmp, kvm) { +if (tmp != vcpu && !kvm_arm_vcpu_powered_off (tmp)) { + denied = true; +break ; + } + } +mutex_unlock (&kvm->lock); + +if (denied) { +smccc_set_retval (vcpu,PSCI_RET_DENIED ,0 ,0 ,0 ); +return 1 ; + } + +__kvm_reset_vcpu (vcpu, &reset_state); +kvm_vcpu_wfi (vcpu); +return 1 ; +} +static void kvm_psci_narrow_to_32bit (struct kvm_vcpu *vcpu) {int i;
@@ -343,6 +387,8 @@ static int kvm_psci_1_0_call(struct kvm_vcpu *vcpu)case PSCI_0_2_FN_MIGRATE_INFO_TYPE :case PSCI_0_2_FN_SYSTEM_OFF :case PSCI_0_2_FN_SYSTEM_RESET : +case PSCI_1_0_FN_SYSTEM_SUSPEND : +case PSCI_1_0_FN64_SYSTEM_SUSPEND :case PSCI_1_0_FN_PSCI_FEATURES :case ARM_SMCCC_VERSION_FUNC_ID : val =0 ;
@@ -352,6 +398,11 @@ static int kvm_psci_1_0_call(struct kvm_vcpu *vcpu)break ; }break ; +case PSCI_1_0_FN_SYSTEM_SUSPEND : +kvm_psci_narrow_to_32bit (vcpu); + fallthrough; +case PSCI_1_0_FN64_SYSTEM_SUSPEND : +return kvm_psci_system_suspend (vcpu);default :return kvm_psci_0_2_call (vcpu); }
arch/arm64/kvm/reset.c +2 -1
@@ -215,7 +215,8 @@ static bool vcpu_allowed_register_width(struct kvm_vcpu *vcpu)* * Note: This function can be called from two paths: * - The KVM_ARM_VCPU_INIT ioctl -* - handling a request issued by another VCPU in the PSCI handling code +* - handling a request issued by possibly another VCPU in the PSCI handling +* code * * In the first case, the VCPU will not be loaded, and in the second case the * VCPU will be loaded. Because this function operates purely on the
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
Marc Zyngier
maintainerQuoted 49 lines · Oliver Upton
ARM DEN0022D.b 5.19 "
SYSTEM_SUSPEND" describes a PSCI call that allows software to request that a system be placed in the deepest possible low-power state. Effectively, software can use this to suspend itself to RAM. Note that the semantics of this PSCI call are very similar toCPU_SUSPEND, which is already implemented in KVM.Implement the
SYSTEM_SUSPENDin KVM. Similar toCPU_SUSPEND, the low-power state is implemented as a guest WFI. Synchronously reset the calling CPU before entering the WFI, such that the vCPU may immediately resume execution when a wakeup event is recognized.Signed-off-by Oliver Upton <[email protected]>--- arch/arm64/kvm/psci.c | 51 ++++++++++++++++++++++++++++++++++++++++++ arch/arm64/kvm/reset.c | 3 ++- 2 files changed, 53 insertions(+), 1 deletion(-)arch/arm64/kvm/psci.c +23
-0@@ -208,6 +208,50 @@ static void kvm_psci_system_reset(struct kvm_vcpu *vcpu)kvm_prepare_system_event (vcpu,KVM_SYSTEM_EVENT_RESET ); } +static int kvm_psci_system_suspend (struct kvm_vcpu *vcpu) +{ +struct vcpu_reset_state reset_state; +struct kvm *kvm = vcpu->kvm; +struct kvm_vcpu *tmp; +bool denied = false; +unsigned long i; + + reset_state.pc =smccc_get_arg1 (vcpu); +if (!kvm_ipa_valid (kvm, reset_state.pc)) { +smccc_set_retval (vcpu,PSCI_RET_INVALID_ADDRESS ,0 ,0 ,0 ); +return 1 ; + } + + reset_state.r0 =smccc_get_arg2 (vcpu); + reset_state.be =kvm_vcpu_is_be (vcpu); + reset_state.reset = true; + +/* +* The SYSTEM_SUSPEND PSCI call requires that all vCPUs (except the +* calling vCPU) be in an OFF state, as determined by the +* implementation. +*
arch/arm64/kvm/psci.c static void kvm_psci_system_reset(struct kvm_vcpu *vcpu) · line 243
Quoted 10 lines
arch/arm64/kvm/psci.c +10
-0+* See ARM DEN0022D, 5.19 "SYSTEM_SUSPEND" for more details. +*/ +mutex_lock (&kvm->lock); +kvm_for_each_vcpu (i, tmp, kvm) { +if (tmp != vcpu && !kvm_arm_vcpu_powered_off (tmp)) { + denied = true; +break ; + } + } +mutex_unlock (&kvm->lock);
This looks dodgy. Nothing seems to prevent userspace from setting the mp_state to RUNNING in parallel with this, as only the vcpu mutex is held when this ioctl is issued.
It looks to me that what you want is what lock_all_vcpus() does (Alexandru has a patch moving it out of the vgic code as part of his SPE series).
It is also pretty unclear what the interaction with userspace is once you have released the lock. If the VMM starts a vcpu other than the suspending one, what is its state? The spec doesn't see to help here. I can see two options:
- either all the vcpus have the same reset state applied to them as they come up, unless they are started with CPU_ON by a vcpu that has already booted (but there is a single 'context_id' provided, and I fear this is going to confuse the OS)...
- or only the suspending vcpu can resume the system, and we must fail a change of mp_state for the other vcpus.
What do you think?
arch/arm64/kvm/psci.c static void kvm_psci_system_reset(struct kvm_vcpu *vcpu) · line 251
Quoted 8 lines
arch/arm64/kvm/psci.c +8
-0+ +if (denied) { +smccc_set_retval (vcpu,PSCI_RET_DENIED ,0 ,0 ,0 ); +return 1 ; + } + +__kvm_reset_vcpu (vcpu, &reset_state); +kvm_vcpu_wfi (vcpu);
I have mixed feelings about this. The vcpu has reset before being in WFI, while it really should be the other way around and userspace could rely on observing the transition.
What breaks if you change this?
Thanks,
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
Hi Marc,
Thanks for reviewing the series. ACK to the nits and smaller comments you've made, I'll incorporate that feedback in the next series.
Quoted 80 lines · Marc Zyngier
Quoted 49 lines · Oliver Upton
ARM DEN0022D.b 5.19 "
SYSTEM_SUSPEND" describes a PSCI call that allows software to request that a system be placed in the deepest possible low-power state. Effectively, software can use this to suspend itself to RAM. Note that the semantics of this PSCI call are very similar toCPU_SUSPEND, which is already implemented in KVM.Implement the
SYSTEM_SUSPENDin KVM. Similar toCPU_SUSPEND, the low-power state is implemented as a guest WFI. Synchronously reset the calling CPU before entering the WFI, such that the vCPU may immediately resume execution when a wakeup event is recognized.Signed-off-by Oliver Upton <[email protected]>--- arch/arm64/kvm/psci.c | 51 ++++++++++++++++++++++++++++++++++++++++++ arch/arm64/kvm/reset.c | 3 ++- 2 files changed, 53 insertions(+), 1 deletion(-)arch/arm64/kvm/psci.c +23
-0@@ -208,6 +208,50 @@ static void kvm_psci_system_reset(struct kvm_vcpu *vcpu)kvm_prepare_system_event (vcpu,KVM_SYSTEM_EVENT_RESET ); } +static int kvm_psci_system_suspend (struct kvm_vcpu *vcpu) +{ +struct vcpu_reset_state reset_state; +struct kvm *kvm = vcpu->kvm; +struct kvm_vcpu *tmp; +bool denied = false; +unsigned long i; + + reset_state.pc =smccc_get_arg1 (vcpu); +if (!kvm_ipa_valid (kvm, reset_state.pc)) { +smccc_set_retval (vcpu,PSCI_RET_INVALID_ADDRESS ,0 ,0 ,0 ); +return 1 ; + } + + reset_state.r0 =smccc_get_arg2 (vcpu); + reset_state.be =kvm_vcpu_is_be (vcpu); + reset_state.reset = true; + +/* +* The SYSTEM_SUSPEND PSCI call requires that all vCPUs (except the +* calling vCPU) be in an OFF state, as determined by the +* implementation. +* arch/arm64/kvm/psci.c static void kvm_psci_system_reset(struct kvm_vcpu *vcpu) · line 243
Quoted 10 lines
arch/arm64/kvm/psci.c +10
-0+* See ARM DEN0022D, 5.19 "SYSTEM_SUSPEND" for more details. +*/ +mutex_lock (&kvm->lock); +kvm_for_each_vcpu (i, tmp, kvm) { +if (tmp != vcpu && !kvm_arm_vcpu_powered_off (tmp)) { + denied = true; +break ; + } + } +mutex_unlock (&kvm->lock);This looks dodgy. Nothing seems to prevent userspace from setting the
mp_stateto RUNNING in parallel with this, as only the vcpu mutex is held when this ioctl is issued.It looks to me that what you want is what
lock_all_vcpus()does (Alexandru has a patch moving it out of the vgic code as part of his SPE series).It is also pretty unclear what the interaction with userspace is once you have released the lock. If the VMM starts a vcpu other than the suspending one, what is its state? The spec doesn't see to help here. I can see two options:
- either all the vcpus have the same reset state applied to them as they come up, unless they are started with
CPU_ONby a vcpu that has already booted (but there is a single 'context_id' provided, and I fear this is going to confuse the OS)...
Quoted 4 lines
- or only the suspending vcpu can resume the system, and we must fail a change of
mp_statefor the other vcpus.What do you think?
Definitely the latter. The documentation of SYSTEM_SUSPEND is quite shaky on this, but it would appear that the intention is for the caller to be the first CPU to wake up.
Quoted 13 lines
arch/arm64/kvm/psci.c static void kvm_psci_system_reset(struct kvm_vcpu *vcpu) · line 251
Quoted 8 lines
arch/arm64/kvm/psci.c +8
-0+ +if (denied) { +smccc_set_retval (vcpu,PSCI_RET_DENIED ,0 ,0 ,0 ); +return 1 ; + } + +__kvm_reset_vcpu (vcpu, &reset_state); +kvm_vcpu_wfi (vcpu);I have mixed feelings about this. The vcpu has reset before being in WFI, while it really should be the other way around and userspace could rely on observing the transition.
Quoted 1 line
What breaks if you change this?
I don't think that userspace would be able to observe the transition even if we WFI before the reset. I imagine that would take the form of setting KVM_REQ_VCPU_RESET, which we explicitly handle before letting userspace access the vCPU's state as of commit 6826c6849b46 ("KVM: arm64: Handle PSCI resets before userspace touches vCPU state").
Given this, I felt it was probably best to avoid all the indirection and just do the vCPU reset in the handling of SYSTEM_SUSPEND. It does, however, imply that we have slightly different behavior when userspace exits are enabled, as that will happen pre-reset and pre-WFI.
--
Oliver
Marc Zyngier
maintainerQuoted 87 lines · Oliver Upton
Hi Marc,
Thanks for reviewing the series. ACK to the nits and smaller comments you've made, I'll incorporate that feedback in the next series.
Quoted 80 lines · Marc Zyngier
Quoted 49 lines · Oliver Upton
ARM DEN0022D.b 5.19 "
SYSTEM_SUSPEND" describes a PSCI call that allows software to request that a system be placed in the deepest possible low-power state. Effectively, software can use this to suspend itself to RAM. Note that the semantics of this PSCI call are very similar toCPU_SUSPEND, which is already implemented in KVM.Implement the
SYSTEM_SUSPENDin KVM. Similar toCPU_SUSPEND, the low-power state is implemented as a guest WFI. Synchronously reset the calling CPU before entering the WFI, such that the vCPU may immediately resume execution when a wakeup event is recognized.Signed-off-by Oliver Upton <[email protected]>--- arch/arm64/kvm/psci.c | 51 ++++++++++++++++++++++++++++++++++++++++++ arch/arm64/kvm/reset.c | 3 ++- 2 files changed, 53 insertions(+), 1 deletion(-)arch/arm64/kvm/psci.c +23
-0@@ -208,6 +208,50 @@ static void kvm_psci_system_reset(struct kvm_vcpu *vcpu)kvm_prepare_system_event (vcpu,KVM_SYSTEM_EVENT_RESET ); } +static int kvm_psci_system_suspend (struct kvm_vcpu *vcpu) +{ +struct vcpu_reset_state reset_state; +struct kvm *kvm = vcpu->kvm; +struct kvm_vcpu *tmp; +bool denied = false; +unsigned long i; + + reset_state.pc =smccc_get_arg1 (vcpu); +if (!kvm_ipa_valid (kvm, reset_state.pc)) { +smccc_set_retval (vcpu,PSCI_RET_INVALID_ADDRESS ,0 ,0 ,0 ); +return 1 ; + } + + reset_state.r0 =smccc_get_arg2 (vcpu); + reset_state.be =kvm_vcpu_is_be (vcpu); + reset_state.reset = true; + +/* +* The SYSTEM_SUSPEND PSCI call requires that all vCPUs (except the +* calling vCPU) be in an OFF state, as determined by the +* implementation. +* arch/arm64/kvm/psci.c static void kvm_psci_system_reset(struct kvm_vcpu *vcpu) · line 243
Quoted 10 lines
arch/arm64/kvm/psci.c +10
-0+* See ARM DEN0022D, 5.19 "SYSTEM_SUSPEND" for more details. +*/ +mutex_lock (&kvm->lock); +kvm_for_each_vcpu (i, tmp, kvm) { +if (tmp != vcpu && !kvm_arm_vcpu_powered_off (tmp)) { + denied = true; +break ; + } + } +mutex_unlock (&kvm->lock);This looks dodgy. Nothing seems to prevent userspace from setting the
mp_stateto RUNNING in parallel with this, as only the vcpu mutex is held when this ioctl is issued.It looks to me that what you want is what
lock_all_vcpus()does (Alexandru has a patch moving it out of the vgic code as part of his SPE series).It is also pretty unclear what the interaction with userspace is once you have released the lock. If the VMM starts a vcpu other than the suspending one, what is its state? The spec doesn't see to help here. I can see two options:
- either all the vcpus have the same reset state applied to them as they come up, unless they are started with
CPU_ONby a vcpu that has already booted (but there is a single 'context_id' provided, and I fear this is going to confuse the OS)...
Quoted 8 lines
Quoted 4 lines
- or only the suspending vcpu can resume the system, and we must fail a change of
mp_statefor the other vcpus.What do you think?
Definitely the latter. The documentation of
SYSTEM_SUSPENDis quite shaky on this, but it would appear that the intention is for the caller to be the first CPU to wake up.
Yup. We now have clarification on the intent of the spec (only the caller CPU can resume the system), and this needs to be tightened.
Quoted 14 lines
Quoted 14 lines
arch/arm64/kvm/psci.c static void kvm_psci_system_reset(struct kvm_vcpu *vcpu) · line 251
Quoted 9 lines
arch/arm64/kvm/psci.c +8
-0+ +if (denied) { +smccc_set_retval (vcpu,PSCI_RET_DENIED ,0 ,0 ,0 ); +return 1 ; + } + +__kvm_reset_vcpu (vcpu, &reset_state); +kvm_vcpu_wfi (vcpu);I have mixed feelings about this. The vcpu has reset before being in WFI, while it really should be the other way around and userspace could rely on observing the transition.
Quoted 4 lines
Quoted 1 line
What breaks if you change this?
I don't think that userspace would be able to observe the transition even if we WFI before the reset.
I disagree. At any point can userspace issue a signal which would trigger a return from WFI and an exit to userspace, and I don't think this should result in a reset being observed.
This also means that SYSTEM_SUSPEND must be robust wrt signal delivery, which it doesn't seem to be.
Quoted 5 lines
I imagine that would take the form
of settingKVM_REQ_VCPU_RESET, which we explicitly handle before letting userspace access the vCPU's state as of commit6826c6849b46("KVM: arm64: Handle PSCI resets before userspace touches vCPU state").
In that case, the vcpu is ready to run, and is not blocked by anything, so this is quite different.
Quoted 5 lines
Given this, I felt it was probably best to avoid all the indirection and just do the vCPU reset in the handling of
SYSTEM_SUSPEND. It does, however, imply that we have slightly different behavior when userspace exits are enabled, as that will happen pre-reset and pre-WFI.
And that's exactly the sort of behaviour I'd like to avoid if at all possible. But maybe we don't need to support the standalone version that doesn't involve userspace?
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
Quoted 92 lines · Marc Zyngier
Quoted 90 lines · Oliver Upton
Hi Marc,
Thanks for reviewing the series. ACK to the nits and smaller comments you've made, I'll incorporate that feedback in the next series.
Quoted 83 lines · Marc Zyngier
Quoted 49 lines · Oliver Upton
ARM DEN0022D.b 5.19 "
SYSTEM_SUSPEND" describes a PSCI call that allows software to request that a system be placed in the deepest possible low-power state. Effectively, software can use this to suspend itself to RAM. Note that the semantics of this PSCI call are very similar toCPU_SUSPEND, which is already implemented in KVM.Implement the
SYSTEM_SUSPENDin KVM. Similar toCPU_SUSPEND, the low-power state is implemented as a guest WFI. Synchronously reset the calling CPU before entering the WFI, such that the vCPU may immediately resume execution when a wakeup event is recognized.Signed-off-by Oliver Upton <[email protected]>--- arch/arm64/kvm/psci.c | 51 ++++++++++++++++++++++++++++++++++++++++++ arch/arm64/kvm/reset.c | 3 ++- 2 files changed, 53 insertions(+), 1 deletion(-)arch/arm64/kvm/psci.c +23
-0@@ -208,6 +208,50 @@ static void kvm_psci_system_reset(struct kvm_vcpu *vcpu)kvm_prepare_system_event (vcpu,KVM_SYSTEM_EVENT_RESET ); } +static int kvm_psci_system_suspend (struct kvm_vcpu *vcpu) +{ +struct vcpu_reset_state reset_state; +struct kvm *kvm = vcpu->kvm; +struct kvm_vcpu *tmp; +bool denied = false; +unsigned long i; + + reset_state.pc =smccc_get_arg1 (vcpu); +if (!kvm_ipa_valid (kvm, reset_state.pc)) { +smccc_set_retval (vcpu,PSCI_RET_INVALID_ADDRESS ,0 ,0 ,0 ); +return 1 ; + } + + reset_state.r0 =smccc_get_arg2 (vcpu); + reset_state.be =kvm_vcpu_is_be (vcpu); + reset_state.reset = true; + +/* +* The SYSTEM_SUSPEND PSCI call requires that all vCPUs (except the +* calling vCPU) be in an OFF state, as determined by the +* implementation. +* arch/arm64/kvm/psci.c static void kvm_psci_system_reset(struct kvm_vcpu *vcpu) · line 243
Quoted 10 lines
arch/arm64/kvm/psci.c +10
-0+* See ARM DEN0022D, 5.19 "SYSTEM_SUSPEND" for more details. +*/ +mutex_lock (&kvm->lock); +kvm_for_each_vcpu (i, tmp, kvm) { +if (tmp != vcpu && !kvm_arm_vcpu_powered_off (tmp)) { + denied = true; +break ; + } + } +mutex_unlock (&kvm->lock);This looks dodgy. Nothing seems to prevent userspace from setting the
mp_stateto RUNNING in parallel with this, as only the vcpu mutex is held when this ioctl is issued.It looks to me that what you want is what
lock_all_vcpus()does (Alexandru has a patch moving it out of the vgic code as part of his SPE series).It is also pretty unclear what the interaction with userspace is once you have released the lock. If the VMM starts a vcpu other than the suspending one, what is its state? The spec doesn't see to help here. I can see two options:
- either all the vcpus have the same reset state applied to them as they come up, unless they are started with
CPU_ONby a vcpu that has already booted (but there is a single 'context_id' provided, and I fear this is going to confuse the OS)...- or only the suspending vcpu can resume the system, and we must fail a change of
mp_statefor the other vcpus.
Quoted 9 lines
Quoted 5 lines
Quoted 1 line
What do you think?
Definitely the latter. The documentation of
SYSTEM_SUSPENDis quite shaky on this, but it would appear that the intention is for the caller to be the first CPU to wake up.Yup. We now have clarification on the intent of the spec (only the caller CPU can resume the system), and this needs to be tightened.
I'm beginning to wonder if the VMM/KVM split implementation of system-scoped PSCI calls can ever be right. There exists a critical section in all system-wide PSCI calls that currently spans an exit to userspace. I cannot devise a sane way to guard such a critical section when we are returning control to userspace.
For example, KVM offlines all of the CPUs except for the exiting CPU when handling SYSTEM_RESET or SYSTEM_OFF, but nothing prevents an interleaving KVM_ARM_VCPU_INIT or KVM_SET_MP_STATE from disturbing the state of the VM. Couldn't even say its a userspace bug, either, because a different vCPU could do something before the caller has exited. Even if we grab all the vCPU mutexes, we'd need to drop them before exiting to userspace.
If userspace decides to reject the PSCI call, we're giving control back to the guest in a wildly different state than it had making the PSCI call. Again, the PSCI spec is vague on this matter, but I believe the intuitive answer is that we should not change the VM state if the call is rejected. This could upset an otherwise well-behaved KVM guest.
Doing SYSTEM_SUSPEND in userspace is better, as KVM avoids mucking with the VM state before the PSCI call is actually accepted. However, any of the consistency checks in the kernel for SYSTEM_SUSPEND are entirely moot. Anything can happen between the exit to userspace and the moment userspace actually recognizes the SYSTEM_SUSPEND call on the exiting CPU.
KVM rejecting attempts to resume vCPUs besides the caller will break a correct userspace, given the inherent race that crops up when exiting. Blocking attempts to resume other vCPUs could have unintented consequences as well. It seems that we'd need to prevent KVM_ARM_VCPU_INIT calls as well as KVM_SET_MP_STATE, even though the former could be used in a valid SYSTEM_SUSPEND implementation.
I really do hate to go back to the drawing board on the PSCI stuff again, but there seems to be a fundamental issue in how system-scoped calls are handled. Userspace is probably the only place where we could quiesce the VM state, assess if the PSCI call should be accepted, and change the VM state.
Do you think all of this is an issue as well?
--
Oliver
Marc Zyngier
maintainerQuoted 16 lines · Oliver Upton
I'm beginning to wonder if the VMM/KVM split implementation of system-scoped PSCI calls can ever be right. There exists a critical section in all system-wide PSCI calls that currently spans an exit to userspace. I cannot devise a sane way to guard such a critical section when we are returning control to userspace.
For example, KVM offlines all of the CPUs except for the exiting CPU when handling
SYSTEM_RESETorSYSTEM_OFF, but nothing prevents an interleavingKVM_ARM_VCPU_INITorKVM_SET_MP_STATEfrom disturbing the state of the VM. Couldn't even say its a userspace bug, either, because a different vCPU could do something before the caller has exited. Even if we grab all the vCPU mutexes, we'd need to drop them before exiting to userspace.
Quoted 5 lines
If userspace decides to reject the PSCI call, we're giving control back to the guest in a wildly different state than it had making the PSCI call. Again, the PSCI spec is vague on this matter, but I believe the intuitive answer is that we should not change the VM state if the call is rejected. This could upset an otherwise well-behaved KVM guest.
Sure. But this is the equivalent of a buggy firmware/hardware, and a failing PSCI reboot is likely to have had destructive effects. Is it nice? Absolutely not. Is it a problem in practice? It hasn't in the 10+ years this API has been implemented.
The alternative is to be able to forward all the PSCI events to userspace and let it deal with it. It has long been at the back of my mind to allow userspace to request ranges of hypercalls to be forwarded directly, without any in-kernel handling. I'm all for it, but this must be a buy-in from the VMM.
Quoted 6 lines
Doing
SYSTEM_SUSPENDin userspace is better, as KVM avoids mucking with the VM state before the PSCI call is actually accepted. However, any of the consistency checks in the kernel forSYSTEM_SUSPENDare entirely moot. Anything can happen between the exit to userspace and the moment userspace actually recognizes theSYSTEM_SUSPENDcall on the exiting CPU.
I agree. Maybe we just don't do any and only exit to userspace on the calling vcpu. It then becomes the responsibility of userspace to take the other vcpus out of the kernel and change their state if required.
Quoted 7 lines
KVM rejecting attempts to resume vCPUs besides the caller will break a correct userspace, given the inherent race that crops up when exiting. Blocking attempts to resume other vCPUs could have unintented consequences as well. It seems that we'd need to prevent
KVM_ARM_VCPU_INITcalls as well asKVM_SET_MP_STATE, even though the former could be used in a validSYSTEM_SUSPENDimplementation.
I don't think we need to enforce this if we leave suspend entirely to userspace. At the end of the day, we rely on the VMM not to screw up the guest. If the VMM restarts the wrong vcpu, that's bad behaviour, but there are a million other ways for the VMM to mess the guess up.
Quoted 7 lines
I really do hate to go back to the drawing board on the PSCI stuff again, but there seems to be a fundamental issue in how system-scoped calls are handled. Userspace is probably the only place where we could quiesce the VM state, assess if the PSCI call should be accepted, and change the VM state.
Do you think all of this is an issue as well?
I don't think we should worry too much about the other system events. They are now ABI, and changing them is tricky. For suspend, I think punting the whole thing to userspace is doable. Otherwise, the alternative is to implement full userspace PSCI support, which is going to be a lot of work (and a lot of ABI discussions...).
Thanks,
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
PATCH v3 10/19 KVM: Create helper for setting a system event exit
In reply to Oliver UptonCreate a helper that appropriately configures kvm_run for a system event exit.
No functional change intended.
--- arch/arm64/kvm/psci.c | 4 +--- arch/riscv/kvm/vcpu_sbi_v01.c | 4 +--- arch/x86/kvm/x86.c | 6 ++---- include/linux/kvm_host.h | 7 +++++++ 4 files changed, 11 insertions(+), 10 deletions(-)
arch/arm64/kvm/psci.c +1 -3
@@ -193,9 +193,7 @@ static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type) tmp->arch.mp_state =KVM_MP_STATE_STOPPED ;kvm_make_all_cpus_request (vcpu->kvm,KVM_REQ_SLEEP ); -memset (&vcpu->run->system_event,0 ,sizeof (vcpu->run->system_event)); - vcpu->run->system_event.type = type; - vcpu->run->exit_reason =KVM_EXIT_SYSTEM_EVENT ; +kvm_vcpu_set_system_event_exit (vcpu, type); }static void kvm_psci_system_off (struct kvm_vcpu *vcpu)
arch/riscv/kvm/vcpu_sbi_v01.c +1 -3
@@ -24,9 +24,7 @@ static void kvm_sbi_system_shutdown(struct kvm_vcpu *vcpu, tmp->arch.power_off = true;kvm_make_all_cpus_request (vcpu->kvm,KVM_REQ_SLEEP ); -memset (&run->system_event,0 ,sizeof (run->system_event)); - run->system_event.type = type; - run->exit_reason =KVM_EXIT_SYSTEM_EVENT ; +kvm_vcpu_set_system_event_exit (vcpu, type); } static int kvm_sbi_ext_v01_handler(struct kvm_vcpu *vcpu, struct kvm_run *run,
arch/x86/kvm/x86.c +2 -4
@@ -9903,14 +9903,12 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)if (kvm_check_request (KVM_REQ_APIC_PAGE_RELOAD , vcpu))kvm_vcpu_reload_apic_access_page (vcpu);if (kvm_check_request (KVM_REQ_HV_CRASH , vcpu)) { - vcpu->run->exit_reason =KVM_EXIT_SYSTEM_EVENT ; - vcpu->run->system_event.type =KVM_SYSTEM_EVENT_CRASH ; +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_CRASH ); r =0 ; goto out; }if (kvm_check_request (KVM_REQ_HV_RESET , vcpu)) { - vcpu->run->exit_reason =KVM_EXIT_SYSTEM_EVENT ; - vcpu->run->system_event.type =KVM_SYSTEM_EVENT_RESET ; +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_RESET ); r =0 ; goto out; }
include/linux/kvm_host.h +7 -0
@@ -2202,6 +2202,13 @@ static inline void kvm_handle_signal_exit(struct kvm_vcpu *vcpu) }#endif /* CONFIG_KVM_XFER_TO_GUEST_WORK */ +static inline void kvm_vcpu_set_system_event_exit (struct kvm_vcpu *vcpu,u32 type) +{ +memset (&vcpu->run->system_event,0 ,sizeof (vcpu->run->system_event)); + vcpu->run->system_event.type = type; + vcpu->run->exit_reason =KVM_EXIT_SYSTEM_EVENT ; +} +/* * This defines how many reserved entries we want to keep before we * kick the vcpu to the userspace to avoid dirty ring full. This
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
Re: [PATCH v3 10/19] KVM: Create helper for setting a system event exit
Quoted 8 lines · Oliver Upton
Create a helper that appropriately configures
kvm_runfor a system event exit.No functional change intended.
Suggested-by Marc Zyngier <[email protected]>Signed-off-by Oliver Upton <[email protected]>
Looks good to me.
For KVM RISC-V:
Regards,
Anup
Quoted 79 lines
--- arch/arm64/kvm/psci.c | 4 +--- arch/riscv/kvm/vcpu_sbi_v01.c | 4 +--- arch/x86/kvm/x86.c | 6 ++---- include/linux/kvm_host.h | 7 +++++++ 4 files changed, 11 insertions(+), 10 deletions(-)arch/arm64/kvm/psci.c +1
-3@@ -193,9 +193,7 @@ static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type) tmp->arch.mp_state =KVM_MP_STATE_STOPPED ;kvm_make_all_cpus_request (vcpu->kvm,KVM_REQ_SLEEP ); -memset (&vcpu->run->system_event,0 ,sizeof (vcpu->run->system_event)); - vcpu->run->system_event.type = type; - vcpu->run->exit_reason =KVM_EXIT_SYSTEM_EVENT ; +kvm_vcpu_set_system_event_exit (vcpu, type); }static void kvm_psci_system_off (struct kvm_vcpu *vcpu)arch/riscv/kvm/vcpu_sbi_v01.c +1
-3@@ -24,9 +24,7 @@ static void kvm_sbi_system_shutdown(struct kvm_vcpu *vcpu, tmp->arch.power_off = true;kvm_make_all_cpus_request (vcpu->kvm,KVM_REQ_SLEEP ); -memset (&run->system_event,0 ,sizeof (run->system_event)); - run->system_event.type = type; - run->exit_reason =KVM_EXIT_SYSTEM_EVENT ; +kvm_vcpu_set_system_event_exit (vcpu, type); } static int kvm_sbi_ext_v01_handler(struct kvm_vcpu *vcpu, struct kvm_run *run,arch/x86/kvm/x86.c +2
-4@@ -9903,14 +9903,12 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)if (kvm_check_request (KVM_REQ_APIC_PAGE_RELOAD , vcpu))kvm_vcpu_reload_apic_access_page (vcpu);if (kvm_check_request (KVM_REQ_HV_CRASH , vcpu)) { - vcpu->run->exit_reason =KVM_EXIT_SYSTEM_EVENT ; - vcpu->run->system_event.type =KVM_SYSTEM_EVENT_CRASH ; +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_CRASH ); r =0 ; goto out; }if (kvm_check_request (KVM_REQ_HV_RESET , vcpu)) { - vcpu->run->exit_reason =KVM_EXIT_SYSTEM_EVENT ; - vcpu->run->system_event.type =KVM_SYSTEM_EVENT_RESET ; +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_RESET ); r =0 ; goto out; }include/linux/kvm_host.h +7
-1@@ -2202,6 +2202,13 @@ static inline void kvm_handle_signal_exit(struct kvm_vcpu *vcpu) }#endif /* CONFIG_KVM_XFER_TO_GUEST_WORK */ +static inline void kvm_vcpu_set_system_event_exit (struct kvm_vcpu *vcpu,u32 type) +{ +memset (&vcpu->run->system_event,0 ,sizeof (vcpu->run->system_event)); + vcpu->run->system_event.type = type; + vcpu->run->exit_reason =KVM_EXIT_SYSTEM_EVENT ; +} +/* * This defines how many reserved entries we want to keep before we * kick the vcpu to the userspace to avoid dirty ring full. This -- 2.35.1.473.g83b2b277ed-goog
Marc Zyngier
maintainerRe: [PATCH v3 10/19] KVM: Create helper for setting a system event exit
In reply to Oliver UptonQuoted 5 lines · Oliver Upton
include/linux/kvm_host.h +0
-0
include/linux/kvm_host.h static inline void kvm_handle_signal_exit(struct kvm_vcpu *vcpu) · line 2211
Quoted 10 lines
include/linux/kvm_host.h +7
-0@@ -2202,6 +2202,13 @@ static inline void kvm_handle_signal_exit(struct kvm_vcpu *vcpu) }#endif /* CONFIG_KVM_XFER_TO_GUEST_WORK */ +static inline void kvm_vcpu_set_system_event_exit (struct kvm_vcpu *vcpu,u32 type) +{ +memset (&vcpu->run->system_event,0 ,sizeof (vcpu->run->system_event)); + vcpu->run->system_event.type = type; + vcpu->run->exit_reason =KVM_EXIT_SYSTEM_EVENT ; +} +
nit: does this really deserve an inline function? I'd stick that in kvm_main.c, really. Or is that getting in the way of building KVM as a module on 'the other architecture'?
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
PATCH v3 11/19 KVM: arm64: Return a value from check_vcpu_requests()
In reply to Oliver UptonA subsequent change to KVM will introduce a vCPU request that could result in an exit to userspace. Change check_vcpu_requests() to return a value and document the function. Unconditionally return 1 for now.
--- arch/arm64/kvm/arm.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
arch/arm64/kvm/arm.c +14 -2
@@ -719,7 +719,16 @@ void kvm_vcpu_wfi(struct kvm_vcpu *vcpu)preempt_enable (); } -static void check_vcpu_requests (struct kvm_vcpu *vcpu) +/** +* check_vcpu_requests - check and handle pending vCPU requests +* @vcpu: the VCPU pointer +* +* Return: 1 if we should enter the guest +* 0 if we should exit to userspace +* <= 0 if we should exit to userspace, where the return value indicates +* an error +*/ +static int check_vcpu_requests (struct kvm_vcpu *vcpu) {if (kvm_request_pending (vcpu)) {if (kvm_check_request (KVM_REQ_SLEEP , vcpu))
@@ -749,6 +758,8 @@ static void check_vcpu_requests(struct kvm_vcpu *vcpu)kvm_pmu_handle_pmcr (vcpu,__vcpu_sys_reg (vcpu,PMCR_EL0 )); } + +return 1 ; }static bool vcpu_mode_is_bad_32bit (struct kvm_vcpu *vcpu)
@@ -859,7 +870,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)update_vmid (&vcpu->arch.hw_mmu->vmid); -check_vcpu_requests (vcpu); +if (ret >0 ) + ret =check_vcpu_requests (vcpu);/* * Preparing the interrupts to be injected also
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
PATCH v3 12/19 KVM: arm64: Add support for userspace to suspend a vCPU
In reply to Oliver UptonIntroduce a new MP state, KVM_MP_STATE_SUSPENDED, which indicates a vCPU is in a suspended state. In the suspended state the vCPU will block until a wakeup event (pending interrupt) is recognized.
Add a new system event type, KVM_SYSTEM_EVENT_WAKEUP, to indicate to userspace that KVM has recognized one such wakeup event. It is the responsibility of userspace to then make the vCPU runnable, or leave it suspended until the next wakeup event.
--- Documentation/virt/kvm/api.rst | 23 ++++++++++++++++++-- arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/kvm/arm.c | 35 +++++++++++++++++++++++++++++++ include/uapi/linux/kvm.h | 2 ++ 4 files changed, 59 insertions(+), 2 deletions(-)
Documentation/virt/kvm/api.rst +21 -2
@@ -1482,14 +1482,29 @@ Possible values are: [s390] KVM_MP_STATE_LOAD the vcpu is in a special load/startup state [s390] + KVM_MP_STATE_SUSPENDED the vcpu is in a suspend state and is waiting + for a wakeup event [arm/arm64] ========================== =============================================== On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel irqchip, the multiprocessing state must be maintained by userspace on these architectures. -For arm/arm64/riscv: -^^^^^^^^^^^^^^^^^^^^ +For arm/arm64: +^^^^^^^^^^^^^^ + +If a vCPU is in the KVM_MP_STATE_SUSPENDED state, KVM will block the vCPU +thread and wait for a wakeup event. A wakeup event is defined as a pending +interrupt for the guest. + +If a wakeup event is recognized, KVM will exit to userspace with a +KVM_SYSTEM_EVENT exit, where the event type is KVM_SYSTEM_EVENT_WAKEUP. If +userspace wants to honor the wakeup, it must set the vCPU's MP state to +KVM_MP_STATE_RUNNABLE. If it does not, KVM will continue to await a wakeup +event in subsequent calls to KVM_RUN. + +For riscv: +^^^^^^^^^^ The only states that are valid are KVM_MP_STATE_STOPPED and KVM_MP_STATE_RUNNABLE which reflect if the vcpu is paused or not.
@@ -5914,6 +5929,7 @@ should put the acknowledged interrupt vector into the 'epr' field. #define KVM_SYSTEM_EVENT_SHUTDOWN 1 #define KVM_SYSTEM_EVENT_RESET 2 #define KVM_SYSTEM_EVENT_CRASH 3 + #define KVM_SYSTEM_EVENT_WAKEUP 4 __u32 type; __u64 flags; } system_event;
@@ -5938,6 +5954,9 @@ Valid values for 'type' are: has requested a crash condition maintenance. Userspace can choose to ignore the request, or to gather VM memory core dump and/or reset/shutdown of the VM. + - KVM_SYSTEM_EVENT_WAKEUP -- the guest is in a suspended state and KVM + has recognized a wakeup event. Userspace may honor this event by marking + the exiting vCPU as runnable, or deny it and call KVM_RUN again. ::
arch/arm64/include/asm/kvm_host.h +1 -0
@@ -46,6 +46,7 @@#define KVM_REQ_RECORD_STEAL KVM_ARCH_REQ(3)#define KVM_REQ_RELOAD_GICv4 KVM_ARCH_REQ(4)#define KVM_REQ_RELOAD_PMU KVM_ARCH_REQ(5) +#define KVM_REQ_SUSPEND KVM_ARCH_REQ(6)#define KVM_DIRTY_LOG_MANUAL_CAPS (KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE | \ KVM_DIRTY_LOG_INITIALLY_SET)
arch/arm64/kvm/arm.c +35 -0
@@ -438,6 +438,18 @@ bool kvm_arm_vcpu_powered_off(struct kvm_vcpu *vcpu)return vcpu->arch.mp_state ==KVM_MP_STATE_STOPPED ; } +static void kvm_arm_vcpu_suspend (struct kvm_vcpu *vcpu) +{ + vcpu->arch.mp_state =KVM_MP_STATE_SUSPENDED ; +kvm_make_request (KVM_REQ_SUSPEND , vcpu); +kvm_vcpu_kick (vcpu); +} + +bool kvm_arm_vcpu_suspended (struct kvm_vcpu *vcpu) +{ +return vcpu->arch.mp_state ==KVM_MP_STATE_SUSPENDED ; +} +int kvm_arch_vcpu_ioctl_get_mpstate (struct kvm_vcpu *vcpu,struct kvm_mp_state *mp_state) {
@@ -458,6 +470,9 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,case KVM_MP_STATE_STOPPED :kvm_arm_vcpu_power_off (vcpu);break ; +case KVM_MP_STATE_SUSPENDED : +kvm_arm_vcpu_suspend (vcpu); +break ;default : ret = -EINVAL ; }
@@ -719,6 +734,23 @@ void kvm_vcpu_wfi(struct kvm_vcpu *vcpu)preempt_enable (); } +static int kvm_vcpu_suspend (struct kvm_vcpu *vcpu) +{ +if (!kvm_arm_vcpu_suspended (vcpu)) +return 1 ; + +kvm_vcpu_wfi (vcpu); + +/* +* The suspend state is sticky; we do not leave it until userspace +* explicitly marks the vCPU as runnable. Request that we suspend again +* later. +*/ +kvm_make_request (KVM_REQ_SUSPEND , vcpu); +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_WAKEUP ); +return 0 ; +} +/** * check_vcpu_requests - check and handle pending vCPU requests * @vcpu: the VCPU pointer
@@ -757,6 +789,9 @@ static int check_vcpu_requests(struct kvm_vcpu *vcpu)if (kvm_check_request (KVM_REQ_RELOAD_PMU , vcpu))kvm_pmu_handle_pmcr (vcpu,__vcpu_sys_reg (vcpu,PMCR_EL0 )); + +if (kvm_check_request (KVM_REQ_SUSPEND , vcpu)) +return kvm_vcpu_suspend (vcpu); }return 1 ;
include/uapi/linux/kvm.h +2 -0
@@ -444,6 +444,7 @@ struct kvm_run {#define KVM_SYSTEM_EVENT_SHUTDOWN 1#define KVM_SYSTEM_EVENT_RESET 2#define KVM_SYSTEM_EVENT_CRASH 3 +#define KVM_SYSTEM_EVENT_WAKEUP 4__u32 type;__u64 flags; } system_event;
@@ -634,6 +635,7 @@ struct kvm_vapic_addr {#define KVM_MP_STATE_OPERATING 7#define KVM_MP_STATE_LOAD 8#define KVM_MP_STATE_AP_RESET_HOLD 9 +#define KVM_MP_STATE_SUSPENDED 10struct kvm_mp_state {__u32 mp_state;
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
Marc Zyngier
maintainerRe: [PATCH v3 12/19] KVM: arm64: Add support for userspace to suspend a vCPU
Quoted 23 lines · Oliver Upton
Introduce a new MP state,
KVM_MP_STATE_SUSPENDED, which indicates a vCPU is in a suspended state. In the suspended state the vCPU will block until a wakeup event (pending interrupt) is recognized.Add a new system event type,
KVM_SYSTEM_EVENT_WAKEUP, to indicate to userspace that KVM has recognized one such wakeup event. It is the responsibility of userspace to then make the vCPU runnable, or leave it suspended until the next wakeup event.Signed-off-by Oliver Upton <[email protected]>--- Documentation/virt/kvm/api.rst | 23 ++++++++++++++++++-- arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/kvm/arm.c | 35 +++++++++++++++++++++++++++++++ include/uapi/linux/kvm.h | 2 ++ 4 files changed, 59 insertions(+), 2 deletions(-)Documentation/virt/kvm/api.rst +0
-0
Documentation/virt/kvm/api.rst Possible values are: · line 1486
Quoted 5 lines
Documentation/virt/kvm/api.rst +2
-0@@ -1482,14 +1482,29 @@ Possible values are: [s390] KVM_MP_STATE_LOAD the vcpu is in a special load/startup state [s390] + KVM_MP_STATE_SUSPENDED the vcpu is in a suspend state and is waiting + for a wakeup event [arm/arm64]
nit: arm64 only (these are host architectures, not guest). Eventually, someone needs to do a bit of cleanup in the docs to remove any trace of ye olde 32bit stuff.
Quoted 4 lines
Documentation/virt/kvm/api.rst +0
-0========================== =============================================== On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel irqchip, the multiprocessing state must be maintained by userspace on
Documentation/virt/kvm/api.rst Possible values are: · line 1498
Quoted 10 lines
Documentation/virt/kvm/api.rst +6
-2these architectures. -For arm/arm64/riscv: -^^^^^^^^^^^^^^^^^^^^ +For arm/arm64: +^^^^^^^^^^^^^^ + +If a vCPU is in the KVM_MP_STATE_SUSPENDED state, KVM will block the vCPU +thread and wait for a wakeup event. A wakeup event is defined as a pending +interrupt for the guest.
nit: a pending interrupt that the guest can actually handle (a masked interrupt can be pending). It'd be more accurate to describe this state as the architectural execution of a WFI instruction.
Documentation/virt/kvm/api.rst Possible values are: · line 1504
Quoted 6 lines
Documentation/virt/kvm/api.rst +6
-0+ +If a wakeup event is recognized, KVM will exit to userspace with a +KVM_SYSTEM_EVENT exit, where the event type is KVM_SYSTEM_EVENT_WAKEUP. If +userspace wants to honor the wakeup, it must set the vCPU's MP state to +KVM_MP_STATE_RUNNABLE. If it does not, KVM will continue to await a wakeup +event in subsequent calls to KVM_RUN.
I can see a potential 'gotcha' here. If the VMM doesn't want to set the vcpu as runnable, but doesn't take action on the source of the wake-up (masking the interrupt), you'll get an immediate wake-up event again. The VMM is now eating 100% of the CPU and not making forward progress. Luser error, but you may want to capture the failure mode and make it crystal clear in the doc.
It also mean that at the point where it decides to restart the guest for real, it must restore the interrupt state as it initially found it.
Quoted 41 lines
Documentation/virt/kvm/api.rst +7
-0+ +For riscv: +^^^^^^^^^^ The only states that are valid are KVM_MP_STATE_STOPPED and KVM_MP_STATE_RUNNABLE which reflect if the vcpu is paused or not.@@ -5914,6 +5929,7 @@ should put the acknowledged interrupt vector into the 'epr' field. #define KVM_SYSTEM_EVENT_SHUTDOWN 1 #define KVM_SYSTEM_EVENT_RESET 2 #define KVM_SYSTEM_EVENT_CRASH 3 + #define KVM_SYSTEM_EVENT_WAKEUP 4 __u32 type; __u64 flags; } system_event;@@ -5938,6 +5954,9 @@ Valid values for 'type' are: has requested a crash condition maintenance. Userspace can choose to ignore the request, or to gather VM memory core dump and/or reset/shutdown of the VM. + - KVM_SYSTEM_EVENT_WAKEUP -- the guest is in a suspended state and KVM + has recognized a wakeup event. Userspace may honor this event by marking + the exiting vCPU as runnable, or deny it and call KVM_RUN again. ::arch/arm64/include/asm/kvm_host.h +1
-0@@ -46,6 +46,7 @@#define KVM_REQ_RECORD_STEAL KVM_ARCH_REQ(3)#define KVM_REQ_RELOAD_GICv4 KVM_ARCH_REQ(4)#define KVM_REQ_RELOAD_PMU KVM_ARCH_REQ(5) +#define KVM_REQ_SUSPEND KVM_ARCH_REQ(6)#define KVM_DIRTY_LOG_MANUAL_CAPS (KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE | \ KVM_DIRTY_LOG_INITIALLY_SET)arch/arm64/kvm/arm.c +0
-0
arch/arm64/kvm/arm.c bool kvm_arm_vcpu_powered_off(struct kvm_vcpu *vcpu) · line 445
Quoted 8 lines
arch/arm64/kvm/arm.c +5
-0@@ -438,6 +438,18 @@ bool kvm_arm_vcpu_powered_off(struct kvm_vcpu *vcpu)return vcpu->arch.mp_state ==KVM_MP_STATE_STOPPED ; } +static void kvm_arm_vcpu_suspend (struct kvm_vcpu *vcpu) +{ + vcpu->arch.mp_state =KVM_MP_STATE_SUSPENDED ; +kvm_make_request (KVM_REQ_SUSPEND , vcpu); +kvm_vcpu_kick (vcpu);
I wonder whether this kvm_vcpu_kick() is simply cargo-culted. The mp_state calls can only be done from the vcpu fd, and thus the vcpu cannot be running, so there is nothing to kick. Not a big deal, but something we may want to look at later on.
arch/arm64/kvm/arm.c bool kvm_arm_vcpu_powered_off(struct kvm_vcpu *vcpu) · line 448
Quoted 3 lines
arch/arm64/kvm/arm.c +3
-0+} + +bool kvm_arm_vcpu_suspended (struct kvm_vcpu *vcpu)
static?
Quoted 64 lines
arch/arm64/kvm/arm.c +27
-0+{ +return vcpu->arch.mp_state ==KVM_MP_STATE_SUSPENDED ; +} +int kvm_arch_vcpu_ioctl_get_mpstate (struct kvm_vcpu *vcpu,struct kvm_mp_state *mp_state) {@@ -458,6 +470,9 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,case KVM_MP_STATE_STOPPED :kvm_arm_vcpu_power_off (vcpu);break ; +case KVM_MP_STATE_SUSPENDED : +kvm_arm_vcpu_suspend (vcpu); +break ;default : ret = -EINVAL ; }@@ -719,6 +734,23 @@ void kvm_vcpu_wfi(struct kvm_vcpu *vcpu)preempt_enable (); } +static int kvm_vcpu_suspend (struct kvm_vcpu *vcpu) +{ +if (!kvm_arm_vcpu_suspended (vcpu)) +return 1 ; + +kvm_vcpu_wfi (vcpu); + +/* +* The suspend state is sticky; we do not leave it until userspace +* explicitly marks the vCPU as runnable. Request that we suspend again +* later. +*/ +kvm_make_request (KVM_REQ_SUSPEND , vcpu); +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_WAKEUP ); +return 0 ; +} +/** * check_vcpu_requests - check and handle pending vCPU requests * @vcpu: the VCPU pointer @@ -757,6 +789,9 @@ static int check_vcpu_requests(struct kvm_vcpu *vcpu)if (kvm_check_request (KVM_REQ_RELOAD_PMU , vcpu))kvm_pmu_handle_pmcr (vcpu,__vcpu_sys_reg (vcpu,PMCR_EL0 )); + +if (kvm_check_request (KVM_REQ_SUSPEND , vcpu)) +return kvm_vcpu_suspend (vcpu); }return 1 ;include/uapi/linux/kvm.h +1
-0@@ -444,6 +444,7 @@ struct kvm_run {#define KVM_SYSTEM_EVENT_SHUTDOWN 1#define KVM_SYSTEM_EVENT_RESET 2#define KVM_SYSTEM_EVENT_CRASH 3 +#define KVM_SYSTEM_EVENT_WAKEUP 4__u32 type;__u64 flags; } system_event;
include/uapi/linux/kvm.h struct kvm_vapic_addr { · line 641
Quoted 7 lines
include/uapi/linux/kvm.h +1
-0@@ -634,6 +635,7 @@ struct kvm_vapic_addr {#define KVM_MP_STATE_OPERATING 7#define KVM_MP_STATE_LOAD 8#define KVM_MP_STATE_AP_RESET_HOLD 9 +#define KVM_MP_STATE_SUSPENDED 10struct kvm_mp_state {__u32 mp_state;
This patch looks OK as is, but it is the interactions with PSCI that concern me. What we have here is per-CPU suspend triggered by userspace. PSCI OTOH offers two variants of suspend triggered by the guest. All of them get different implementations, and I have a hard time figuring out how they all interact...
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
Re: [PATCH v3 12/19] KVM: arm64: Add support for userspace to suspend a vCPU
Quoted 20 lines · Marc Zyngier
Quoted 18 lines · Oliver Upton
Introduce a new MP state,
KVM_MP_STATE_SUSPENDED, which indicates a vCPU is in a suspended state. In the suspended state the vCPU will block until a wakeup event (pending interrupt) is recognized.Add a new system event type,
KVM_SYSTEM_EVENT_WAKEUP, to indicate to userspace that KVM has recognized one such wakeup event. It is the responsibility of userspace to then make the vCPU runnable, or leave it suspended until the next wakeup event.Signed-off-by Oliver Upton <[email protected]>--- Documentation/virt/kvm/api.rst | 23 ++++++++++++++++++-- arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/kvm/arm.c | 35 +++++++++++++++++++++++++++++++ include/uapi/linux/kvm.h | 2 ++ 4 files changed, 59 insertions(+), 2 deletions(-)
Quoted 12 lines
Documentation/virt/kvm/api.rst Possible values are: · line 1486
Quoted 10 lines
Documentation/virt/kvm/api.rst +2
-0@@ -1482,14 +1482,29 @@ Possible values are: [s390] KVM_MP_STATE_LOAD the vcpu is in a special load/startup state [s390] + KVM_MP_STATE_SUSPENDED the vcpu is in a suspend state and is waiting + for a wakeup event [arm/arm64]nit: arm64 only (these are host architectures, not guest).
Roger that.
Quoted 3 lines
Eventually, someone needs to do a bit of cleanup in the docs to remove any trace of ye olde 32bit stuff.
I'm just going to act like I didn't read this ;-)
Quoted 7 lines
Quoted 7 lines
Documentation/virt/kvm/api.rst +0
-0========================== =============================================== On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel irqchip, the multiprocessing state must be maintained by userspace on these architectures.
Quoted 13 lines
Documentation/virt/kvm/api.rst Possible values are: · line 1498
Quoted 8 lines
Documentation/virt/kvm/api.rst +6
-2-For arm/arm64/riscv: -^^^^^^^^^^^^^^^^^^^^ +For arm/arm64: +^^^^^^^^^^^^^^ + +If a vCPU is in the KVM_MP_STATE_SUSPENDED state, KVM will block the vCPU +thread and wait for a wakeup event. A wakeup event is defined as a pending +interrupt for the guest.nit: a pending interrupt that the guest can actually handle (a masked interrupt can be pending). It'd be more accurate to describe this state as the architectural execution of a WFI instruction.
Yeah, probably better than paraphrasing.
Quoted 14 lines
Documentation/virt/kvm/api.rst Possible values are: · line 1504
Quoted 6 lines
Documentation/virt/kvm/api.rst +6
-0+ +If a wakeup event is recognized, KVM will exit to userspace with a +KVM_SYSTEM_EVENT exit, where the event type is KVM_SYSTEM_EVENT_WAKEUP. If +userspace wants to honor the wakeup, it must set the vCPU's MP state to +KVM_MP_STATE_RUNNABLE. If it does not, KVM will continue to await a wakeup +event in subsequent calls to KVM_RUN.I can see a potential 'gotcha' here. If the VMM doesn't want to set the vcpu as runnable, but doesn't take action on the source of the wake-up (masking the interrupt), you'll get an immediate wake-up event again. The VMM is now eating 100% of the CPU and not making forward progress. Luser error, but you may want to capture the failure mode and make it crystal clear in the doc.
Quoted 4 lines
It also mean that at the point where it decides to restart the guest for real, it must restore the interrupt state as it initially found it.
Yeah, I had realized this when working on the series, but lazily swept it under the rug of user error. But, it is probably better to be more descriptive in the documentation, so I'll adopt the suggestion. Thanks!
Quoted 44 lines
Quoted 44 lines
Documentation/virt/kvm/api.rst +7
-0+ +For riscv: +^^^^^^^^^^ The only states that are valid are KVM_MP_STATE_STOPPED and KVM_MP_STATE_RUNNABLE which reflect if the vcpu is paused or not.@@ -5914,6 +5929,7 @@ should put the acknowledged interrupt vector into the 'epr' field. #define KVM_SYSTEM_EVENT_SHUTDOWN 1 #define KVM_SYSTEM_EVENT_RESET 2 #define KVM_SYSTEM_EVENT_CRASH 3 + #define KVM_SYSTEM_EVENT_WAKEUP 4 __u32 type; __u64 flags; } system_event;@@ -5938,6 +5954,9 @@ Valid values for 'type' are: has requested a crash condition maintenance. Userspace can choose to ignore the request, or to gather VM memory core dump and/or reset/shutdown of the VM. + - KVM_SYSTEM_EVENT_WAKEUP -- the guest is in a suspended state and KVM + has recognized a wakeup event. Userspace may honor this event by marking + the exiting vCPU as runnable, or deny it and call KVM_RUN again. ::arch/arm64/include/asm/kvm_host.h +1
-0@@ -46,6 +46,7 @@#define KVM_REQ_RECORD_STEAL KVM_ARCH_REQ(3)#define KVM_REQ_RELOAD_GICv4 KVM_ARCH_REQ(4)#define KVM_REQ_RELOAD_PMU KVM_ARCH_REQ(5) +#define KVM_REQ_SUSPEND KVM_ARCH_REQ(6)#define KVM_DIRTY_LOG_MANUAL_CAPS (KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE | \ KVM_DIRTY_LOG_INITIALLY_SET)arch/arm64/kvm/arm.c +0
-0@@ -438,6 +438,18 @@ bool kvm_arm_vcpu_powered_off(struct kvm_vcpu *vcpu)return vcpu->arch.mp_state ==KVM_MP_STATE_STOPPED ; }
Quoted 11 lines
arch/arm64/kvm/arm.c bool kvm_arm_vcpu_powered_off(struct kvm_vcpu *vcpu) · line 445
Quoted 5 lines
arch/arm64/kvm/arm.c +5
-0+static void kvm_arm_vcpu_suspend (struct kvm_vcpu *vcpu) +{ + vcpu->arch.mp_state =KVM_MP_STATE_SUSPENDED ; +kvm_make_request (KVM_REQ_SUSPEND , vcpu); +kvm_vcpu_kick (vcpu);I wonder whether this
kvm_vcpu_kick()is simply cargo-culted. Themp_statecalls can only be done from the vcpu fd, and thus the vcpu cannot be running, so there is nothing to kick. Not a big deal, but something we may want to look at later on.
True, and hopefully this isn't an open invitation to add support for vCPUs suspending other vCPUs, which would be a mess.
Quoted 75 lines
arch/arm64/kvm/arm.c bool kvm_arm_vcpu_powered_off(struct kvm_vcpu *vcpu) · line 448
Quoted 3 lines
arch/arm64/kvm/arm.c +3
-0+} + +bool kvm_arm_vcpu_suspended (struct kvm_vcpu *vcpu)static?
Quoted 69 lines
arch/arm64/kvm/arm.c +27
-0+{ +return vcpu->arch.mp_state ==KVM_MP_STATE_SUSPENDED ; +} +int kvm_arch_vcpu_ioctl_get_mpstate (struct kvm_vcpu *vcpu,struct kvm_mp_state *mp_state) {@@ -458,6 +470,9 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,case KVM_MP_STATE_STOPPED :kvm_arm_vcpu_power_off (vcpu);break ; +case KVM_MP_STATE_SUSPENDED : +kvm_arm_vcpu_suspend (vcpu); +break ;default : ret = -EINVAL ; }@@ -719,6 +734,23 @@ void kvm_vcpu_wfi(struct kvm_vcpu *vcpu)preempt_enable (); } +static int kvm_vcpu_suspend (struct kvm_vcpu *vcpu) +{ +if (!kvm_arm_vcpu_suspended (vcpu)) +return 1 ; + +kvm_vcpu_wfi (vcpu); + +/* +* The suspend state is sticky; we do not leave it until userspace +* explicitly marks the vCPU as runnable. Request that we suspend again +* later. +*/ +kvm_make_request (KVM_REQ_SUSPEND , vcpu); +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_WAKEUP ); +return 0 ; +} +/** * check_vcpu_requests - check and handle pending vCPU requests * @vcpu: the VCPU pointer @@ -757,6 +789,9 @@ static int check_vcpu_requests(struct kvm_vcpu *vcpu)if (kvm_check_request (KVM_REQ_RELOAD_PMU , vcpu))kvm_pmu_handle_pmcr (vcpu,__vcpu_sys_reg (vcpu,PMCR_EL0 )); + +if (kvm_check_request (KVM_REQ_SUSPEND , vcpu)) +return kvm_vcpu_suspend (vcpu); }return 1 ;include/uapi/linux/kvm.h +2
-0@@ -444,6 +444,7 @@ struct kvm_run {#define KVM_SYSTEM_EVENT_SHUTDOWN 1#define KVM_SYSTEM_EVENT_RESET 2#define KVM_SYSTEM_EVENT_CRASH 3 +#define KVM_SYSTEM_EVENT_WAKEUP 4__u32 type;__u64 flags; } system_event;@@ -634,6 +635,7 @@ struct kvm_vapic_addr {#define KVM_MP_STATE_OPERATING 7#define KVM_MP_STATE_LOAD 8#define KVM_MP_STATE_AP_RESET_HOLD 9 +#define KVM_MP_STATE_SUSPENDED 10
Quoted 8 lines
include/uapi/linux/kvm.h struct kvm_vapic_addr { · line 641
Quoted 2 lines
include/uapi/linux/kvm.h +0
-0struct kvm_mp_state {__u32 mp_state;This patch looks OK as is, but it is the interactions with PSCI that concern me. What we have here is per-CPU suspend triggered by userspace. PSCI OTOH offers two variants of suspend triggered by the guest. All of them get different implementations, and I have a hard time figuring out how they all interact...
Yeah, all of this suspend logic could become a tangle.
There is likely an opportunity to share some bits between CPU_SUSPEND and SYSTEM_SUSPEND, but userspace-directed suspends are different enough that it warrants a different implmentation.
Thanks again for the review!
--
Oliver
PATCH v3 13/19 KVM: arm64: Add support KVM_SYSTEM_EVENT_SUSPEND to PSCI SYSTEM_SUSPEND
In reply to Oliver UptonAdd a new system event type, KVM_SYSTEM_EVENT_SUSPEND, which indicates to userspace that the guest has requested the VM be suspended. Userspace can decide whether or not it wants to honor the guest's request by changing the MP state of the vCPU. If it does not, userspace is responsible for configuring the vCPU to return an error to the guest. Document these expectations in the KVM API documentation.
To preserve ABI, this new exit requires explicit opt-in from userspace. Add KVM_CAP_ARM_SYSTEM_SUSPEND which grants userspace the ability to opt-in to these exits on a per-VM basis.
--- Documentation/virt/kvm/api.rst | 39 +++++++++++++++++++++++++++++++ arch/arm64/include/asm/kvm_host.h | 3 +++ arch/arm64/kvm/arm.c | 5 ++++ arch/arm64/kvm/psci.c | 5 ++++ include/uapi/linux/kvm.h | 2 ++ 5 files changed, 54 insertions(+)
Documentation/virt/kvm/api.rst +39 -0
@@ -5930,6 +5930,7 @@ should put the acknowledged interrupt vector into the 'epr' field. #define KVM_SYSTEM_EVENT_RESET 2 #define KVM_SYSTEM_EVENT_CRASH 3 #define KVM_SYSTEM_EVENT_WAKEUP 4 + #define KVM_SYSTEM_EVENT_SUSPENDED 5 __u32 type; __u64 flags; } system_event;
@@ -5957,6 +5958,34 @@ Valid values for 'type' are: - KVM_SYSTEM_EVENT_WAKEUP -- the guest is in a suspended state and KVM has recognized a wakeup event. Userspace may honor this event by marking the exiting vCPU as runnable, or deny it and call KVM_RUN again. + - KVM_SYSTEM_EVENT_SUSPENDED -- the guest has requested a suspension of + the VM. + +For arm/arm64: +^^^^^^^^^^^^^^ + + KVM_SYSTEM_EVENT_SUSPENDED exits are enabled with the + KVM_CAP_ARM_SYSTEM_SUSPEND VM capability. If a guest successfully + invokes the PSCI SYSTEM_SUSPEND function, KVM will exit to userspace + with this event type. + + The guest's x2 register contains the 'entry_address' where execution + should resume when the VM is brought out of suspend. The guest's x3 + register contains the 'context_id' corresponding to the request. When + the guest resumes execution at 'entry_address', x0 should contain the + 'context_id'. For more details on the SYSTEM_SUSPEND PSCI call, see + ARM DEN0022D.b 5.19 "SYSTEM_SUSPEND". + + Userspace is _required_ to take action for such an exit. It must + either: + + - Honor the guest request to suspend the VM. Userspace must reset + the calling vCPU, then set PC to 'entry_address' and x0 to + 'context_id'. Userspace may request in-kernel emulation of the + suspension by setting the vCPU's state to KVM_MP_STATE_SUSPENDED. + + - Deny the guest request to suspend the VM. Userspace must set + registers x1-x3 to 0 and set x0 to PSCI_RET_INTERNAL_ERROR (-6). ::
@@ -7580,3 +7609,13 @@ The argument to KVM_ENABLE_CAP is also a bitmask, and must be a subset of the result of KVM_CHECK_EXTENSION. KVM will forward to userspace the hypercalls whose corresponding bit is in the argument, and return ENOSYS for the others. + +8.35 KVM_CAP_ARM_SYSTEM_SUSPEND +------------------------------- + +:Capability: KVM_CAP_ARM_SYSTEM_SUSPEND +:Architectures: arm64 +:Type: vm + +When enabled, KVM will exit to userspace with KVM_EXIT_SYSTEM_EVENT of +type KVM_SYSTEM_EVENT_SUSPEND to process the guest suspend request.
arch/arm64/include/asm/kvm_host.h +3 -0
@@ -146,6 +146,9 @@ struct kvm_arch {/* Memory Tagging Extension enabled for the guest */ bool mte_enabled; + +/* System Suspend Event exits enabled for the VM */ +bool system_suspend_exits; };struct kvm_vcpu_fault_info {
arch/arm64/kvm/arm.c +5 -0
@@ -101,6 +101,10 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm, }mutex_unlock (&kvm->lock);break ; +case KVM_CAP_ARM_SYSTEM_SUSPEND : + r =0 ; + kvm->arch.system_suspend_exits = true; +break ;default : r = -EINVAL ;break ;
@@ -209,6 +213,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)case KVM_CAP_SET_GUEST_DEBUG :case KVM_CAP_VCPU_ATTRIBUTES :case KVM_CAP_PTP_KVM : +case KVM_CAP_ARM_SYSTEM_SUSPEND : r =1 ;break ;case KVM_CAP_SET_GUEST_DEBUG2 :
arch/arm64/kvm/psci.c +5 -0
@@ -245,6 +245,11 @@ static int kvm_psci_system_suspend(struct kvm_vcpu *vcpu)return 1 ; } +if (kvm->arch.system_suspend_exits) { +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_SUSPEND ); +return 0 ; + } +__kvm_reset_vcpu (vcpu, &reset_state);kvm_vcpu_wfi (vcpu);return 1 ;
include/uapi/linux/kvm.h +2 -0
@@ -445,6 +445,7 @@ struct kvm_run {#define KVM_SYSTEM_EVENT_RESET 2#define KVM_SYSTEM_EVENT_CRASH 3#define KVM_SYSTEM_EVENT_WAKEUP 4 +#define KVM_SYSTEM_EVENT_SUSPEND 5__u32 type;__u64 flags; } system_event;
@@ -1136,6 +1137,7 @@ struct kvm_ppc_resize_hpt {#define KVM_CAP_VM_GPA_BITS 207#define KVM_CAP_XSAVE2 208#define KVM_CAP_SYS_ATTRIBUTES 209 +#define KVM_CAP_ARM_SYSTEM_SUSPEND 210#ifdef KVM_CAP_IRQ_ROUTING
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
Marc Zyngier
maintainerRe: [PATCH v3 13/19] KVM: arm64: Add support KVM_SYSTEM_EVENT_SUSPEND to PSCI SYSTEM_SUSPEND
Quoted 39 lines · Oliver Upton
Add a new system event type,
KVM_SYSTEM_EVENT_SUSPEND, which indicates to userspace that the guest has requested the VM be suspended. Userspace can decide whether or not it wants to honor the guest's request by changing the MP state of the vCPU. If it does not, userspace is responsible for configuring the vCPU to return an error to the guest. Document these expectations in the KVM API documentation.To preserve ABI, this new exit requires explicit opt-in from userspace. Add
KVM_CAP_ARM_SYSTEM_SUSPENDwhich grants userspace the ability to opt-in to these exits on a per-VM basis.Signed-off-by Oliver Upton <[email protected]>--- Documentation/virt/kvm/api.rst | 39 +++++++++++++++++++++++++++++++ arch/arm64/include/asm/kvm_host.h | 3 +++ arch/arm64/kvm/arm.c | 5 ++++ arch/arm64/kvm/psci.c | 5 ++++ include/uapi/linux/kvm.h | 2 ++ 5 files changed, 54 insertions(+)Documentation/virt/kvm/api.rst +3
-0@@ -5930,6 +5930,7 @@ should put the acknowledged interrupt vector into the 'epr' field. #define KVM_SYSTEM_EVENT_RESET 2 #define KVM_SYSTEM_EVENT_CRASH 3 #define KVM_SYSTEM_EVENT_WAKEUP 4 + #define KVM_SYSTEM_EVENT_SUSPENDED 5 __u32 type; __u64 flags; } system_event;@@ -5957,6 +5958,34 @@ Valid values for 'type' are: - KVM_SYSTEM_EVENT_WAKEUP -- the guest is in a suspended state and KVM has recognized a wakeup event. Userspace may honor this event by marking the exiting vCPU as runnable, or deny it and call KVM_RUN again. + - KVM_SYSTEM_EVENT_SUSPENDED -- the guest has requested a suspension of + the VM.
Documentation/virt/kvm/api.rst Valid values for 'type' are: · line 5972
Quoted 10 lines
Documentation/virt/kvm/api.rst +10
-0+ +For arm/arm64: +^^^^^^^^^^^^^^ + + KVM_SYSTEM_EVENT_SUSPENDED exits are enabled with the + KVM_CAP_ARM_SYSTEM_SUSPEND VM capability. If a guest successfully + invokes the PSCI SYSTEM_SUSPEND function, KVM will exit to userspace + with this event type. + + The guest's x2 register contains the 'entry_address' where execution
x1?
Documentation/virt/kvm/api.rst Valid values for 'type' are: · line 5973
Quoted 1 line
Documentation/virt/kvm/api.rst +1
-0+ should resume when the VM is brought out of suspend. The guest's x3
x2?
Documentation/virt/kvm/api.rst Valid values for 'type' are: · line 5977
Quoted 4 lines
Documentation/virt/kvm/api.rst +4
-0+ register contains the 'context_id' corresponding to the request. When + the guest resumes execution at 'entry_address', x0 should contain the + 'context_id'. For more details on the SYSTEM_SUSPEND PSCI call, see + ARM DEN0022D.b 5.19 "SYSTEM_SUSPEND".
I'd refrain from paraphrasing too much of the spec, and direct the user to it. It will also avoid introducing bugs... ;-)
Overall, "the guest" is super ambiguous, and echoes the questions I had earlier about what this means for an SMP system. Only one vcpu can restart the system, but which one?
Documentation/virt/kvm/api.rst Valid values for 'type' are: · line 5985
Quoted 8 lines
Documentation/virt/kvm/api.rst +8
-0+ + Userspace is _required_ to take action for such an exit. It must + either: + + - Honor the guest request to suspend the VM. Userspace must reset + the calling vCPU, then set PC to 'entry_address' and x0 to + 'context_id'. Userspace may request in-kernel emulation of the + suspension by setting the vCPU's state to KVM_MP_STATE_SUSPENDED.
So here, you are actively saying that the calling vcpu should be the one being resumed. If that's the case (and assuming that this is a behaviour intended by the spec), something should prevent the other vcpus from being started.
Documentation/virt/kvm/api.rst Valid values for 'type' are: · line 5988
Quoted 3 lines
Documentation/virt/kvm/api.rst +3
-0+ + - Deny the guest request to suspend the VM. Userspace must set + registers x1-x3 to 0 and set x0 to PSCI_RET_INTERNAL_ERROR (-6).
Do you have any sort of userspace code that demonstrates this? It'd be super useful to see how that works on any publicly available VMM (qemu, kvmtool, or any of the ferric oxide based monsters).
Quoted 22 lines
Documentation/virt/kvm/api.rst +10
-0::@@ -7580,3 +7609,13 @@ The argument to KVM_ENABLE_CAP is also a bitmask, and must be a subset of the result of KVM_CHECK_EXTENSION. KVM will forward to userspace the hypercalls whose corresponding bit is in the argument, and return ENOSYS for the others. + +8.35 KVM_CAP_ARM_SYSTEM_SUSPEND +------------------------------- + +:Capability: KVM_CAP_ARM_SYSTEM_SUSPEND +:Architectures: arm64 +:Type: vm + +When enabled, KVM will exit to userspace with KVM_EXIT_SYSTEM_EVENT of +type KVM_SYSTEM_EVENT_SUSPEND to process the guest suspend request.arch/arm64/include/asm/kvm_host.h +0
-0
arch/arm64/include/asm/kvm_host.h struct kvm_arch { · line 151
Quoted 6 lines
arch/arm64/include/asm/kvm_host.h +3
-0@@ -146,6 +146,9 @@ struct kvm_arch {/* Memory Tagging Extension enabled for the guest */ bool mte_enabled; + +/* System Suspend Event exits enabled for the VM */ +bool system_suspend_exits;
Gah... More of these. Please pick this patch:
Quoted 31 lines
arch/arm64/include/asm/kvm_host.h +0
-0};struct kvm_vcpu_fault_info {arch/arm64/kvm/arm.c +5
-0@@ -101,6 +101,10 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm, }mutex_unlock (&kvm->lock);break ; +case KVM_CAP_ARM_SYSTEM_SUSPEND : + r =0 ; + kvm->arch.system_suspend_exits = true; +break ;default : r = -EINVAL ;break ;@@ -209,6 +213,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)case KVM_CAP_SET_GUEST_DEBUG :case KVM_CAP_VCPU_ATTRIBUTES :case KVM_CAP_PTP_KVM : +case KVM_CAP_ARM_SYSTEM_SUSPEND : r =1 ;break ;case KVM_CAP_SET_GUEST_DEBUG2 :arch/arm64/kvm/psci.c +0
-0
arch/arm64/kvm/psci.c static int kvm_psci_system_suspend(struct kvm_vcpu *vcpu) · line 252
Quoted 8 lines
arch/arm64/kvm/psci.c +5
-0@@ -245,6 +245,11 @@ static int kvm_psci_system_suspend(struct kvm_vcpu *vcpu)return 1 ; } +if (kvm->arch.system_suspend_exits) { +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_SUSPEND ); +return 0 ; + } +
So there really is a difference in behaviour here. Userspace sees the WFI behaviour before reset (it implements it), while when not using the SUSPEND event, reset occurs before anything else.
They really should behave in a similar way (WFI first, reset next).
Quoted 16 lines
arch/arm64/kvm/psci.c +0
-0__kvm_reset_vcpu (vcpu, &reset_state);kvm_vcpu_wfi (vcpu);return 1 ;include/uapi/linux/kvm.h +1
-0@@ -445,6 +445,7 @@ struct kvm_run {#define KVM_SYSTEM_EVENT_RESET 2#define KVM_SYSTEM_EVENT_CRASH 3#define KVM_SYSTEM_EVENT_WAKEUP 4 +#define KVM_SYSTEM_EVENT_SUSPEND 5__u32 type;__u64 flags; } system_event;
include/uapi/linux/kvm.h struct kvm_ppc_resize_hpt { · line 1142
Quoted 6 lines
include/uapi/linux/kvm.h +1
-0@@ -1136,6 +1137,7 @@ struct kvm_ppc_resize_hpt {#define KVM_CAP_VM_GPA_BITS 207#define KVM_CAP_XSAVE2 208#define KVM_CAP_SYS_ATTRIBUTES 209 +#define KVM_CAP_ARM_SYSTEM_SUSPEND 210#ifdef KVM_CAP_IRQ_ROUTING
Thanks,
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
Re: [PATCH v3 13/19] KVM: arm64: Add support KVM_SYSTEM_EVENT_SUSPEND to PSCI SYSTEM_SUSPEND
Quoted 169 lines · Marc Zyngier
Quoted 39 lines · Oliver Upton
Add a new system event type,
KVM_SYSTEM_EVENT_SUSPEND, which indicates to userspace that the guest has requested the VM be suspended. Userspace can decide whether or not it wants to honor the guest's request by changing the MP state of the vCPU. If it does not, userspace is responsible for configuring the vCPU to return an error to the guest. Document these expectations in the KVM API documentation.To preserve ABI, this new exit requires explicit opt-in from userspace. Add
KVM_CAP_ARM_SYSTEM_SUSPENDwhich grants userspace the ability to opt-in to these exits on a per-VM basis.Signed-off-by Oliver Upton <[email protected]>--- Documentation/virt/kvm/api.rst | 39 +++++++++++++++++++++++++++++++ arch/arm64/include/asm/kvm_host.h | 3 +++ arch/arm64/kvm/arm.c | 5 ++++ arch/arm64/kvm/psci.c | 5 ++++ include/uapi/linux/kvm.h | 2 ++ 5 files changed, 54 insertions(+)Documentation/virt/kvm/api.rst +3
-0@@ -5930,6 +5930,7 @@ should put the acknowledged interrupt vector into the 'epr' field. #define KVM_SYSTEM_EVENT_RESET 2 #define KVM_SYSTEM_EVENT_CRASH 3 #define KVM_SYSTEM_EVENT_WAKEUP 4 + #define KVM_SYSTEM_EVENT_SUSPENDED 5 __u32 type; __u64 flags; } system_event;@@ -5957,6 +5958,34 @@ Valid values for 'type' are: - KVM_SYSTEM_EVENT_WAKEUP -- the guest is in a suspended state and KVM has recognized a wakeup event. Userspace may honor this event by marking the exiting vCPU as runnable, or deny it and call KVM_RUN again. + - KVM_SYSTEM_EVENT_SUSPENDED -- the guest has requested a suspension of + the VM.Documentation/virt/kvm/api.rst Valid values for 'type' are: · line 5972
Quoted 10 lines
Documentation/virt/kvm/api.rst +10
-0+ +For arm/arm64: +^^^^^^^^^^^^^^ + + KVM_SYSTEM_EVENT_SUSPENDED exits are enabled with the + KVM_CAP_ARM_SYSTEM_SUSPEND VM capability. If a guest successfully + invokes the PSCI SYSTEM_SUSPEND function, KVM will exit to userspace + with this event type. + + The guest's x2 register contains the 'entry_address' where executionx1?
Documentation/virt/kvm/api.rst Valid values for 'type' are: · line 5973
Quoted 1 line
Documentation/virt/kvm/api.rst +1
-0+ should resume when the VM is brought out of suspend. The guest's x3x2?
Documentation/virt/kvm/api.rst Valid values for 'type' are: · line 5977
Quoted 4 lines
Documentation/virt/kvm/api.rst +4
-0+ register contains the 'context_id' corresponding to the request. When + the guest resumes execution at 'entry_address', x0 should contain the + 'context_id'. For more details on the SYSTEM_SUSPEND PSCI call, see + ARM DEN0022D.b 5.19 "SYSTEM_SUSPEND".I'd refrain from paraphrasing too much of the spec, and direct the user to it. It will also avoid introducing bugs... ;-)
Overall, "the guest" is super ambiguous, and echoes the questions I had earlier about what this means for an SMP system. Only one vcpu can restart the system, but which one?
Documentation/virt/kvm/api.rst Valid values for 'type' are: · line 5985
Quoted 8 lines
Documentation/virt/kvm/api.rst +8
-0+ + Userspace is _required_ to take action for such an exit. It must + either: + + - Honor the guest request to suspend the VM. Userspace must reset + the calling vCPU, then set PC to 'entry_address' and x0 to + 'context_id'. Userspace may request in-kernel emulation of the + suspension by setting the vCPU's state to KVM_MP_STATE_SUSPENDED.So here, you are actively saying that the calling vcpu should be the one being resumed. If that's the case (and assuming that this is a behaviour intended by the spec), something should prevent the other vcpus from being started.
Documentation/virt/kvm/api.rst Valid values for 'type' are: · line 5988
Quoted 3 lines
Documentation/virt/kvm/api.rst +3
-0+ + - Deny the guest request to suspend the VM. Userspace must set + registers x1-x3 to 0 and set x0 to PSCI_RET_INTERNAL_ERROR (-6).Do you have any sort of userspace code that demonstrates this? It'd be super useful to see how that works on any publicly available VMM (qemu, kvmtool, or any of the ferric oxide based monsters).
Quoted 22 lines
Documentation/virt/kvm/api.rst +10
-0::@@ -7580,3 +7609,13 @@ The argument to KVM_ENABLE_CAP is also a bitmask, and must be a subset of the result of KVM_CHECK_EXTENSION. KVM will forward to userspace the hypercalls whose corresponding bit is in the argument, and return ENOSYS for the others. + +8.35 KVM_CAP_ARM_SYSTEM_SUSPEND +------------------------------- + +:Capability: KVM_CAP_ARM_SYSTEM_SUSPEND +:Architectures: arm64 +:Type: vm + +When enabled, KVM will exit to userspace with KVM_EXIT_SYSTEM_EVENT of +type KVM_SYSTEM_EVENT_SUSPEND to process the guest suspend request.arch/arm64/include/asm/kvm_host.h +0
-0arch/arm64/include/asm/kvm_host.h struct kvm_arch { · line 151
Quoted 6 lines
arch/arm64/include/asm/kvm_host.h +3
-0@@ -146,6 +146,9 @@ struct kvm_arch {/* Memory Tagging Extension enabled for the guest */ bool mte_enabled; + +/* System Suspend Event exits enabled for the VM */ +bool system_suspend_exits;Gah... More of these. Please pick this patch:
Quoted 31 lines
arch/arm64/include/asm/kvm_host.h +0
-0};struct kvm_vcpu_fault_info {arch/arm64/kvm/arm.c +5
-0@@ -101,6 +101,10 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm, }mutex_unlock (&kvm->lock);break ; +case KVM_CAP_ARM_SYSTEM_SUSPEND : + r =0 ; + kvm->arch.system_suspend_exits = true; +break ;default : r = -EINVAL ;break ;@@ -209,6 +213,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)case KVM_CAP_SET_GUEST_DEBUG :case KVM_CAP_VCPU_ATTRIBUTES :case KVM_CAP_PTP_KVM : +case KVM_CAP_ARM_SYSTEM_SUSPEND : r =1 ;break ;case KVM_CAP_SET_GUEST_DEBUG2 :arch/arm64/kvm/psci.c +0
-0arch/arm64/kvm/psci.c static int kvm_psci_system_suspend(struct kvm_vcpu *vcpu) · line 252
Quoted 8 lines
arch/arm64/kvm/psci.c +5
-0@@ -245,6 +245,11 @@ static int kvm_psci_system_suspend(struct kvm_vcpu *vcpu)return 1 ; } +if (kvm->arch.system_suspend_exits) { +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_SUSPEND ); +return 0 ; + } +So there really is a difference in behaviour here. Userspace sees the WFI behaviour before reset (it implements it), while when not using the SUSPEND event, reset occurs before anything else.
Quoted 1 line
They really should behave in a similar way (WFI first, reset next).
I mentioned this on the other patch, but I think the conversation should continue here as UAPI context is in this one.
If SUSPEND exits are disabled and SYSTEM_SUSPEND is implemented in the kernel, userspace cannot observe any intermediate state. I think it is necessary for migration, otherwise if userspace were to save the vCPU post-WFI, pre-reset the pending reset would get lost along the way.
As far as userspace is concerned, I think the WFI+reset operation is atomic. SUSPEND exits just allow userspace to intervene before said atomic operation.
Perhaps I'm missing something: assuming SUSPEND exits are disabled, what value is provided to userspace if it can see WFI behavior before the reset?
--
Thanks,
Oliver
Marc Zyngier
maintainerRe: [PATCH v3 13/19] KVM: arm64: Add support KVM_SYSTEM_EVENT_SUSPEND to PSCI SYSTEM_SUSPEND
Quoted 30 lines · Oliver Upton
Quoted 18 lines · Marc Zyngier
arch/arm64/kvm/psci.c static int kvm_psci_system_suspend(struct kvm_vcpu *vcpu) · line 252
Quoted 13 lines
arch/arm64/kvm/psci.c +5
-0@@ -245,6 +245,11 @@ static int kvm_psci_system_suspend(struct kvm_vcpu *vcpu)return 1 ; } +if (kvm->arch.system_suspend_exits) { +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_SUSPEND ); +return 0 ; + } +So there really is a difference in behaviour here. Userspace sees the WFI behaviour before reset (it implements it), while when not using the SUSPEND event, reset occurs before anything else.
Quoted 1 line
They really should behave in a similar way (WFI first, reset next).
I mentioned this on the other patch, but I think the conversation should continue here as UAPI context is in this one.
If SUSPEND exits are disabled and
SYSTEM_SUSPENDis implemented in the kernel, userspace cannot observe any intermediate state. I think it is necessary for migration, otherwise if userspace were to save the vCPU post-WFI, pre-reset the pending reset would get lost along the way.
Quoted 7 lines
As far as userspace is concerned, I think the WFI+reset operation is atomic. SUSPEND exits just allow userspace to intervene before said atomic operation.
Perhaps I'm missing something: assuming SUSPEND exits are disabled, what value is provided to userspace if it can see WFI behavior before the reset?
Signals get in the way, and break the notion of atomicity. Userspace *will* observe this.
I agree that save/restore is an important point, and that snapshoting the guest at this stage should capture the reset value. But it is the asymmetry of the behaviours that I find jarring:
- if you ask for userspace exit, no reset value is applied and you need to implement the reset in userspace
- if you *don't* ask for a userspace exit, the reset values are applied, and a signal while in WFI will result in this reset being observed
Why can't the userspace exit path also apply the reset values *before* exiting? After all, you can model this exit to userspace as reset+WFI+'spurious exit from WFI'. This would at least unify the two behaviours.
I still dislike the reset state being applied early, but consistency (and save/restore) trumps taste here. I know I'm being pedantic here, but we've been burned with loosely defined semantics in the past, and I want to get this right. Or less wrong.
Thanks,
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
Re: [PATCH v3 13/19] KVM: arm64: Add support KVM_SYSTEM_EVENT_SUSPEND to PSCI SYSTEM_SUSPEND
Quoted 51 lines · Marc Zyngier
Quoted 30 lines · Oliver Upton
Quoted 18 lines · Marc Zyngier
arch/arm64/kvm/psci.c static int kvm_psci_system_suspend(struct kvm_vcpu *vcpu) · line 252
Quoted 13 lines
arch/arm64/kvm/psci.c +5
-0@@ -245,6 +245,11 @@ static int kvm_psci_system_suspend(struct kvm_vcpu *vcpu)return 1 ; } +if (kvm->arch.system_suspend_exits) { +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_SUSPEND ); +return 0 ; + } +So there really is a difference in behaviour here. Userspace sees the WFI behaviour before reset (it implements it), while when not using the SUSPEND event, reset occurs before anything else.
Quoted 1 line
They really should behave in a similar way (WFI first, reset next).
I mentioned this on the other patch, but I think the conversation should continue here as UAPI context is in this one.
If SUSPEND exits are disabled and
SYSTEM_SUSPENDis implemented in the kernel, userspace cannot observe any intermediate state. I think it is necessary for migration, otherwise if userspace were to save the vCPU post-WFI, pre-reset the pending reset would get lost along the way.Quoted 7 lines
As far as userspace is concerned, I think the WFI+reset operation is atomic. SUSPEND exits just allow userspace to intervene before said atomic operation.
Perhaps I'm missing something: assuming SUSPEND exits are disabled, what value is provided to userspace if it can see WFI behavior before the reset?
Signals get in the way, and break the notion of atomicity. Userspace *will* observe this.
I agree that save/restore is an important point, and that snapshoting the guest at this stage should capture the reset value. But it is the asymmetry of the behaviours that I find jarring:
- if you ask for userspace exit, no reset value is applied and you need to implement the reset in userspace
Quoted 8 lines
- if you *don't* ask for a userspace exit, the reset values are applied, and a signal while in WFI will result in this reset being observed
Why can't the userspace exit path also apply the reset values *before* exiting? After all, you can model this exit to userspace as reset+WFI+'spurious exit from WFI'. This would at least unify the two behaviours.
I hesitated applying the reset context to the CPU before the userspace exit because that would be wildly different from the other system events. Userspace wouldn't have much choice but to comply with the guest request at that point.
What about adopting the following:
- Drop the in-kernel SYSTEM_SUSPEND emulation. I think you were
getting at this point in [1], and I'd certainly be open to it. Without a userspace exit, I don't think there is anything meaningfully different between this call and a WFI instruction.
- Add data to the kvm_run structure to convey the reset state for aSYSTEM_SUSPEND exit. There's plenty of room left in the structure for more, and can be done generically (just an array of data) for future expansion. We already are going to need a code change in userspace to do this right, so may as well update its view of kvm_run along the way.
- Exit to userspace with PSCI_RET_INTERNAL_FAILURE queued up for the
guest. Doing so keeps the exits consistent with the other system exits, and affords userspace the ability to deny the call when it wants to.
[1]: http://lore.kernel.org/r/87fso63ha2.wl-maz at kernel.org
Quoted 4 lines
I still dislike the reset state being applied early, but consistency (and save/restore) trumps taste here. I know I'm being pedantic here, but we've been burned with loosely defined semantics in the past, and I want to get this right. Or less wrong.
I completely agree with you. The semantics are a bit funky, and I really do wonder if the easiest way around that is to just make the implementation a userspace problem.
--
Oliver
Marc Zyngier
maintainerRe: [PATCH v3 13/19] KVM: arm64: Add support KVM_SYSTEM_EVENT_SUSPEND to PSCI SYSTEM_SUSPEND
Quoted 67 lines · Oliver Upton
Quoted 51 lines · Marc Zyngier
Quoted 30 lines · Oliver Upton
Quoted 18 lines · Marc Zyngier
arch/arm64/kvm/psci.c static int kvm_psci_system_suspend(struct kvm_vcpu *vcpu) · line 252
Quoted 13 lines
arch/arm64/kvm/psci.c +5
-0@@ -245,6 +245,11 @@ static int kvm_psci_system_suspend(struct kvm_vcpu *vcpu)return 1 ; } +if (kvm->arch.system_suspend_exits) { +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_SUSPEND ); +return 0 ; + } +So there really is a difference in behaviour here. Userspace sees the WFI behaviour before reset (it implements it), while when not using the SUSPEND event, reset occurs before anything else.
Quoted 1 line
They really should behave in a similar way (WFI first, reset next).
I mentioned this on the other patch, but I think the conversation should continue here as UAPI context is in this one.
If SUSPEND exits are disabled and
SYSTEM_SUSPENDis implemented in the kernel, userspace cannot observe any intermediate state. I think it is necessary for migration, otherwise if userspace were to save the vCPU post-WFI, pre-reset the pending reset would get lost along the way.Quoted 7 lines
As far as userspace is concerned, I think the WFI+reset operation is atomic. SUSPEND exits just allow userspace to intervene before said atomic operation.
Perhaps I'm missing something: assuming SUSPEND exits are disabled, what value is provided to userspace if it can see WFI behavior before the reset?
Signals get in the way, and break the notion of atomicity. Userspace *will* observe this.
I agree that save/restore is an important point, and that snapshoting the guest at this stage should capture the reset value. But it is the asymmetry of the behaviours that I find jarring:
- if you ask for userspace exit, no reset value is applied and you need to implement the reset in userspace
Quoted 8 lines
- if you *don't* ask for a userspace exit, the reset values are applied, and a signal while in WFI will result in this reset being observed
Why can't the userspace exit path also apply the reset values *before* exiting? After all, you can model this exit to userspace as reset+WFI+'spurious exit from WFI'. This would at least unify the two behaviours.
I hesitated applying the reset context to the CPU before the userspace exit because that would be wildly different from the other system events. Userspace wouldn't have much choice but to comply with the guest request at that point.
Quoted 6 lines
What about adopting the following:
- Drop the in-kernel
SYSTEM_SUSPENDemulation. I think you were
getting at this point in [1], and I'd certainly be open to it. Without a userspace exit, I don't think there is anything meaningfully different between this call and a WFI instruction.
The only difference is the reset part. And I agree, it only makes the kernel part more complicated than we strictly need it to be. It also slightly clashes with the rest of the system events, in the sense that it is the only one that would have an in-kernel implementation (both reboot and power-off are entirely implemented in userspace).
So I definitely agree about dropping this.
Quoted 7 lines
- Add data to the
kvm_runstructure to convey the reset state for aSYSTEM_SUSPENDexit. There's plenty of room left in the structure for more, and can be done generically (just an array of data) for future expansion. We already are going to need a code change in userspace to do this right, so may as well update its view ofkvm_runalong the way.
The reset state is already available in the guest registers, which are available to userspace. What else do we need to expose?
Quoted 4 lines
- Exit to userspace with
PSCI_RET_INTERNAL_FAILUREqueued up for the
guest. Doing so keeps the exits consistent with the other system exits, and affords userspace the ability to deny the call when it wants to.
Yup, that's what I like about pushing this completely to userspace.
Quoted 11 lines
[1]: http://lore.kernel.org/r/87fso63ha2.wl-maz at kernel.org
Quoted 4 lines
I still dislike the reset state being applied early, but consistency (and save/restore) trumps taste here. I know I'm being pedantic here, but we've been burned with loosely defined semantics in the past, and I want to get this right. Or less wrong.
I completely agree with you. The semantics are a bit funky, and I really do wonder if the easiest way around that is to just make the implementation a userspace problem.
We're in violent agreement. It means that we only need the MP_STATE part to implement WFI from userspace.
Could you try and respin this? Also, it'd be good to see a prototype of userspace code using this, as this is a new API.
Thanks,
M.
Signature · 1 line
Without deviation from the norm, progress is not possible.
Re: [PATCH v3 13/19] KVM: arm64: Add support KVM_SYSTEM_EVENT_SUSPEND to PSCI SYSTEM_SUSPEND
Quoted 93 lines · Marc Zyngier
Quoted 67 lines · Oliver Upton
Quoted 51 lines · Marc Zyngier
Quoted 30 lines · Oliver Upton
Quoted 18 lines · Marc Zyngier
arch/arm64/kvm/psci.c static int kvm_psci_system_suspend(struct kvm_vcpu *vcpu) · line 252
Quoted 13 lines
arch/arm64/kvm/psci.c +5
-0@@ -245,6 +245,11 @@ static int kvm_psci_system_suspend(struct kvm_vcpu *vcpu)return 1 ; } +if (kvm->arch.system_suspend_exits) { +kvm_vcpu_set_system_event_exit (vcpu,KVM_SYSTEM_EVENT_SUSPEND ); +return 0 ; + } +So there really is a difference in behaviour here. Userspace sees the WFI behaviour before reset (it implements it), while when not using the SUSPEND event, reset occurs before anything else.
Quoted 1 line
They really should behave in a similar way (WFI first, reset next).
I mentioned this on the other patch, but I think the conversation should continue here as UAPI context is in this one.
If SUSPEND exits are disabled and
SYSTEM_SUSPENDis implemented in the kernel, userspace cannot observe any intermediate state. I think it is necessary for migration, otherwise if userspace were to save the vCPU post-WFI, pre-reset the pending reset would get lost along the way.Quoted 7 lines
As far as userspace is concerned, I think the WFI+reset operation is atomic. SUSPEND exits just allow userspace to intervene before said atomic operation.
Perhaps I'm missing something: assuming SUSPEND exits are disabled, what value is provided to userspace if it can see WFI behavior before the reset?
Signals get in the way, and break the notion of atomicity. Userspace *will* observe this.
I agree that save/restore is an important point, and that snapshoting the guest at this stage should capture the reset value. But it is the asymmetry of the behaviours that I find jarring:
- if you ask for userspace exit, no reset value is applied and you need to implement the reset in userspace
Quoted 8 lines
- if you *don't* ask for a userspace exit, the reset values are applied, and a signal while in WFI will result in this reset being observed
Why can't the userspace exit path also apply the reset values *before* exiting? After all, you can model this exit to userspace as reset+WFI+'spurious exit from WFI'. This would at least unify the two behaviours.
I hesitated applying the reset context to the CPU before the userspace exit because that would be wildly different from the other system events. Userspace wouldn't have much choice but to comply with the guest request at that point.
Quoted 6 lines
What about adopting the following:
- Drop the in-kernel
SYSTEM_SUSPENDemulation. I think you were
getting at this point in [1], and I'd certainly be open to it. Without a userspace exit, I don't think there is anything meaningfully different between this call and a WFI instruction.The only difference is the reset part. And I agree, it only makes the kernel part more complicated than we strictly need it to be. It also slightly clashes with the rest of the system events, in the sense that it is the only one that would have an in-kernel implementation (both reboot and power-off are entirely implemented in userspace).
So I definitely agree about dropping this.
Quoted 7 lines
- Add data to the
kvm_runstructure to convey the reset state for aSYSTEM_SUSPENDexit. There's plenty of room left in the structure for more, and can be done generically (just an array of data) for future expansion. We already are going to need a code change in userspace to do this right, so may as well update its view ofkvm_runalong the way.
Quoted 2 lines
The reset state is already available in the guest registers, which are available to userspace. What else do we need to expose?
Nothing. It is just a slight nitnoid thing for me where KVM_EXIT_SYSTEM_SUSPEND behaves a bit differently than the others. If a VMM wants to reject the call, it needs to manually set up the SMCCC return value, whereas on the others a naive call to KVM_RUN will do the job since KVM already sets up the failure value.
Unsure if this warrants a kvm_run change, leaning towards no if it is well documented.
Quoted 15 lines
Quoted 4 lines
- Exit to userspace with
PSCI_RET_INTERNAL_FAILUREqueued up for the
guest. Doing so keeps the exits consistent with the other system exits, and affords userspace the ability to deny the call when it wants to.Yup, that's what I like about pushing this completely to userspace.
Quoted 8 lines
[1]: http://lore.kernel.org/r/87fso63ha2.wl-maz at kernel.org
Quoted 4 lines
I still dislike the reset state being applied early, but consistency (and save/restore) trumps taste here. I know I'm being pedantic here, but we've been burned with loosely defined semantics in the past, and I want to get this right. Or less wrong.
Quoted 5 lines
Quoted 3 lines
I completely agree with you. The semantics are a bit funky, and I really do wonder if the easiest way around that is to just make the implementation a userspace problem.
We're in violent agreement.
Lol
Quoted 5 lines
It means that we only need the
MP_STATE
part to implement WFI from userspace.Could you try and respin this? Also, it'd be good to see a prototype of userspace code using this, as this is a new API.
Sure thing. I'll keep it to kvmtool, since that's the most familiar to me. Also, I think I had an RFC for kvmtool many moons ago...
--
Oliver
PATCH v3 14/19 KVM: arm64: Raise default PSCI version to v1.1
In reply to Oliver UptonAs it turns out, KVM already implements the requirements of PSCI v1.1. Raise the default PSCI version to v1.1 to actually advertise as such.
--- arch/arm64/kvm/psci.c | 4 +++- include/kvm/arm_psci.h | 3 ++- 2 files changed, 5 insertions(+), 2 deletions(-)
arch/arm64/kvm/psci.c +3 -1
@@ -370,7 +370,7 @@ static int kvm_psci_1_0_call(struct kvm_vcpu *vcpu)switch (psci_fn) {case PSCI_0_2_FN_PSCI_VERSION : - val =KVM_ARM_PSCI_1_0 ; + val =kvm_psci_version (vcpu);break ;case PSCI_1_0_FN_PSCI_FEATURES : feature =smccc_get_arg1 (vcpu);
@@ -456,6 +456,7 @@ static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu)int kvm_psci_call (struct kvm_vcpu *vcpu) {switch (kvm_psci_version (vcpu)) { +case KVM_ARM_PSCI_1_1 :case KVM_ARM_PSCI_1_0 :return kvm_psci_1_0_call (vcpu);case KVM_ARM_PSCI_0_2 :
@@ -574,6 +575,7 @@ int kvm_arm_set_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)return 0 ;case KVM_ARM_PSCI_0_2 :case KVM_ARM_PSCI_1_0 : +case KVM_ARM_PSCI_1_1 :if (!wants_02)return -EINVAL ; vcpu->kvm->arch.psci_version = val;
include/kvm/arm_psci.h +2 -1
@@ -13,8 +13,9 @@#define KVM_ARM_PSCI_0_1 PSCI_VERSION(0, 1)#define KVM_ARM_PSCI_0_2 PSCI_VERSION(0, 2)#define KVM_ARM_PSCI_1_0 PSCI_VERSION(1, 0) +#define KVM_ARM_PSCI_1_1 PSCI_VERSION(1, 1) -#define KVM_ARM_PSCI_LATEST KVM_ARM_PSCI_1_0 +#define KVM_ARM_PSCI_LATEST KVM_ARM_PSCI_1_1static inline int kvm_psci_version (struct kvm_vcpu *vcpu) {
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
Re: [PATCH v3 14/19] KVM: arm64: Raise default PSCI version to v1.1
Quoted 6 lines · Oliver Upton
As it turns out, KVM already implements the requirements of PSCI v1.1. Raise the default PSCI version to v1.1 to actually advertise as such.
Suggested-by Marc Zyngier <[email protected]>Signed-off-by Oliver Upton <[email protected]>
Ah, looks like this is already in /next, courtesy of Will :-)
https://lore.kernel.org/all/20220221153524.15397-2-will at kernel.org/
--
Thanks,
Oliver
PATCH v3 15/19 selftests: KVM: Rename psci_cpu_on_test to psci_test
In reply to Oliver UptonThere are other interactions with PSCI worth testing; rename the PSCI test to make it more generic.
No functional change intended.
---
tools/testing/selftests/kvm/.gitignore | 2 +-
tools/testing/selftests/kvm/Makefile | 2 +-
.../selftests/kvm/aarch64/{psci_cpu_on_test.c => psci_test.c} | 0
3 files changed, 2 insertions(+), 2 deletions(-)
rename tools/testing/selftests/kvm/aarch64/{psci_cpu_on_test.c => psci_test.c} (100%)tools/testing/selftests/kvm/.gitignore +1 -1
@@ -2,7 +2,7 @@ /aarch64/arch_timer /aarch64/debug-exceptions /aarch64/get-reg-list -/aarch64/psci_cpu_on_test +/aarch64/psci_test /aarch64/vgic_init /aarch64/vgic_irq /s390x/memop
tools/testing/selftests/kvm/Makefile +1 -1
@@ -103,7 +103,7 @@ TEST_GEN_PROGS_x86_64 += system_counter_offset_test TEST_GEN_PROGS_aarch64 += aarch64/arch_timer TEST_GEN_PROGS_aarch64 += aarch64/debug-exceptions TEST_GEN_PROGS_aarch64 += aarch64/get-reg-list -TEST_GEN_PROGS_aarch64 += aarch64/psci_cpu_on_test +TEST_GEN_PROGS_aarch64 += aarch64/psci_test TEST_GEN_PROGS_aarch64 += aarch64/vgic_init TEST_GEN_PROGS_aarch64 += aarch64/vgic_irq TEST_GEN_PROGS_aarch64 += demand_paging_test
tools/testing/selftests/kvm/aarch64/psci_test.c renamed from tools/testing/selftests/kvm/aarch64/psci_cpu_on_test.c +0 -0
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
PATCH v3 16/19 selftests: KVM: Create helper for making SMCCC calls
In reply to Oliver UptonThe PSCI and PV stolen time tests both need to make SMCCC calls within the guest. Create a helper for making SMCCC calls and rework the existing tests to use the library function.
--- .../testing/selftests/kvm/aarch64/psci_test.c | 25 ++++++------------- .../selftests/kvm/include/aarch64/processor.h | 22 ++++++++++++++++ .../selftests/kvm/lib/aarch64/processor.c | 25 +++++++++++++++++++ tools/testing/selftests/kvm/steal_time.c | 13 +++------- 4 files changed, 58 insertions(+), 27 deletions(-)
tools/testing/selftests/kvm/aarch64/psci_test.c +8 -17
@@ -26,32 +26,23 @@static uint64_t psci_cpu_on (uint64_t target_cpu,uint64_t entry_addr,uint64_t context_id) { - register uint64_t x0 asm("x0") = PSCI_0_2_FN64_CPU_ON; - register uint64_t x1 asm("x1") = target_cpu; - register uint64_t x2 asm("x2") = entry_addr; - register uint64_t x3 asm("x3") = context_id; +struct arm_smccc_res res; - asm("hvc #0" - :"=r" (x0) - :"r" (x0),"r" (x1),"r" (x2),"r" (x3) - :"memory" ); +smccc_hvc (PSCI_0_2_FN64_CPU_ON , target_cpu, entry_addr, context_id, +0 ,0 ,0 ,0 , &res); -return x0; +return res.a0; }static uint64_t psci_affinity_info (uint64_t target_affinity,uint64_t lowest_affinity_level) { - register uint64_t x0 asm("x0") = PSCI_0_2_FN64_AFFINITY_INFO; - register uint64_t x1 asm("x1") = target_affinity; - register uint64_t x2 asm("x2") = lowest_affinity_level; +struct arm_smccc_res res; - asm("hvc #0" - :"=r" (x0) - :"r" (x0),"r" (x1),"r" (x2) - :"memory" ); +smccc_hvc (PSCI_0_2_FN64_AFFINITY_INFO , target_affinity, lowest_affinity_level, +0 ,0 ,0 ,0 ,0 , &res); -return x0; +return res.a0; }static void guest_main (uint64_t target_cpu)
tools/testing/selftests/kvm/include/aarch64/processor.h +22 -0
@@ -185,4 +185,26 @@ static inline void local_irq_disable(void) asm volatile("msr daifset, #3" : : : "memory"); } +/** +* struct arm_smccc_res - Result from SMC/HVC call +* @a0-a3 result values from registers 0 to 3 +*/ +struct arm_smccc_res { +unsigned long a0; +unsigned long a1; +unsigned long a2; +unsigned long a3; +}; + +/** +* smccc_hvc - Invoke a SMCCC function using the hvc conduit +* @function_id: the SMCCC function to be called +* @arg0-arg6: SMCCC function arguments, corresponding to registers x1-x7 +* @res: pointer to write the return values from registers x0-x3 +* +*/ +void smccc_hvc (uint32_t function_id,uint64_t arg0,uint64_t arg1, +uint64_t arg2,uint64_t arg3,uint64_t arg4,uint64_t arg5, +uint64_t arg6,struct arm_smccc_res *res); +#endif /* SELFTEST_KVM_PROCESSOR_H */
tools/testing/selftests/kvm/lib/aarch64/processor.c +25 -0
@@ -500,3 +500,28 @@ void __attribute__((constructor)) init_guest_modes(void) {guest_modes_append_default (); } + +void smccc_hvc (uint32_t function_id,uint64_t arg0,uint64_t arg1, +uint64_t arg2,uint64_t arg3,uint64_t arg4,uint64_t arg5, +uint64_t arg6,struct arm_smccc_res *res) +{ + asmvolatile ("mov w0, %w[function_id]\n" +"mov x1, %[arg0]\n" +"mov x2, %[arg1]\n" +"mov x3, %[arg2]\n" +"mov x4, %[arg3]\n" +"mov x5, %[arg4]\n" +"mov x6, %[arg5]\n" +"mov x7, %[arg6]\n" +"hvc #0\n" +"mov %[res0], x0\n" +"mov %[res1], x1\n" +"mov %[res2], x2\n" +"mov %[res3], x3\n" + : [res0]"=r" (res->a0), [res1]"=r" (res->a1), + [res2]"=r" (res->a2), [res3]"=r" (res->a3) + : [function_id]"r" (function_id), [arg0]"r" (arg0), + [arg1]"r" (arg1), [arg2]"r" (arg2), [arg3]"r" (arg3), + [arg4]"r" (arg4), [arg5]"r" (arg5), [arg6]"r" (arg6) + :"x0" ,"x1" ,"x2" ,"x3" ,"x4" ,"x5" ,"x6" ,"x7" ); +}
tools/testing/selftests/kvm/steal_time.c +3 -10
@@ -118,17 +118,10 @@ struct st_time {static int64_t smccc (uint32_t func,uint64_t arg) { -unsigned long ret; +struct arm_smccc_res res; - asmvolatile ( -"mov w0, %w1\n" -"mov x1, %2\n" -"hvc #0\n" -"mov %0, x0\n" - :"=r" (ret) :"r" (func),"r" (arg) : -"x0" ,"x1" ,"x2" ,"x3" ); - -return ret; +smccc_hvc (func, arg,0 ,0 ,0 ,0 ,0 ,0 , &res); +return res.a0; }static void check_status (struct st_time *st)
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
PATCH v3 17/19 selftests: KVM: Use KVM_SET_MP_STATE to power off vCPU in psci_test
In reply to Oliver UptonSetting a vCPU's MP state to KVM_MP_STATE_STOPPED has the effect of powering off the vCPU. Rather than using the vCPU init feature flag, use the KVM_SET_MP_STATE ioctl to power off the target vCPU.
--- tools/testing/selftests/kvm/aarch64/psci_test.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
tools/testing/selftests/kvm/aarch64/psci_test.c +11 -2
@@ -60,6 +60,15 @@ static void guest_main(uint64_t target_cpu)GUEST_DONE (); } +static void vcpu_power_off (struct kvm_vm *vm,uint32_t vcpuid) +{ +struct kvm_mp_state mp_state = { + .mp_state =KVM_MP_STATE_STOPPED , + }; + +vcpu_set_mp_state (vm, vcpuid, &mp_state); +} +int main (void ) {uint64_t target_mpidr, obs_pc, obs_x0;
@@ -75,12 +84,12 @@ int main(void) init.features[0 ] |= (1 <<KVM_ARM_VCPU_PSCI_0_2 );aarch64_vcpu_add_default (vm,VCPU_ID_SOURCE , &init, guest_main); +aarch64_vcpu_add_default (vm,VCPU_ID_TARGET , &init, guest_main);/* * make sure the target is already off when executing the test. */ - init.features[0 ] |= (1 <<KVM_ARM_VCPU_POWER_OFF ); -aarch64_vcpu_add_default (vm,VCPU_ID_TARGET , &init, guest_main); +vcpu_power_off (vm,VCPU_ID_TARGET );get_reg (vm,VCPU_ID_TARGET ,KVM_ARM64_SYS_REG (SYS_MPIDR_EL1 ), &target_mpidr);vcpu_args_set (vm,VCPU_ID_SOURCE ,1 , target_mpidr &MPIDR_HWID_BITMASK );
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
PATCH v3 18/19 selftests: KVM: Refactor psci_test to make it amenable to new tests
In reply to Oliver UptonSplit up the current test into several helpers that will be useful to subsequent test cases added to the PSCI test suite.
--- .../testing/selftests/kvm/aarch64/psci_test.c | 97 ++++++++++++------- 1 file changed, 60 insertions(+), 37 deletions(-)
tools/testing/selftests/kvm/aarch64/psci_test.c +60 -37
@@ -45,21 +45,6 @@ static uint64_t psci_affinity_info(uint64_t target_affinity,return res.a0; } -static void guest_main (uint64_t target_cpu) -{ -GUEST_ASSERT (!psci_cpu_on (target_cpu,CPU_ON_ENTRY_ADDR ,CPU_ON_CONTEXT_ID )); -uint64_t target_state; - -do { - target_state =psci_affinity_info (target_cpu,0 ); - -GUEST_ASSERT ((target_state ==PSCI_0_2_AFFINITY_LEVEL_ON ) || - (target_state ==PSCI_0_2_AFFINITY_LEVEL_OFF )); - }while (target_state !=PSCI_0_2_AFFINITY_LEVEL_ON ); - -GUEST_DONE (); -} -static void vcpu_power_off (struct kvm_vm *vm,uint32_t vcpuid) {struct kvm_mp_state mp_state = {
@@ -69,12 +54,10 @@ static void vcpu_power_off(struct kvm_vm *vm, uint32_t vcpuid)vcpu_set_mp_state (vm, vcpuid, &mp_state); } -int main (void ) +static struct kvm_vm *setup_vm (void *guest_code) { -uint64_t target_mpidr, obs_pc, obs_x0;struct kvm_vcpu_init init;struct kvm_vm *vm; -struct ucall uc; vm =vm_create (VM_MODE_DEFAULT ,DEFAULT_GUEST_PHY_PAGES ,O_RDWR );kvm_vm_elf_load (vm, program_invocation_name);
@@ -83,31 +66,28 @@ int main(void)vm_ioctl (vm,KVM_ARM_PREFERRED_TARGET , &init); init.features[0 ] |= (1 <<KVM_ARM_VCPU_PSCI_0_2 ); -aarch64_vcpu_add_default (vm,VCPU_ID_SOURCE , &init, guest_main); -aarch64_vcpu_add_default (vm,VCPU_ID_TARGET , &init, guest_main); +aarch64_vcpu_add_default (vm,VCPU_ID_SOURCE , &init, guest_code); +aarch64_vcpu_add_default (vm,VCPU_ID_TARGET , &init, guest_code); -/* -* make sure the target is already off when executing the test. -*/ -vcpu_power_off (vm,VCPU_ID_TARGET ); +return vm; +} -get_reg (vm,VCPU_ID_TARGET ,KVM_ARM64_SYS_REG (SYS_MPIDR_EL1 ), &target_mpidr); -vcpu_args_set (vm,VCPU_ID_SOURCE ,1 , target_mpidr &MPIDR_HWID_BITMASK ); -vcpu_run (vm,VCPU_ID_SOURCE ); +static void enter_guest (struct kvm_vm *vm,uint32_t vcpuid) +{ +struct ucall uc; -switch (get_ucall (vm,VCPU_ID_SOURCE , &uc)) { -case UCALL_DONE : -break ; -case UCALL_ABORT : +vcpu_run (vm, vcpuid); +if (get_ucall (vm, vcpuid, &uc) ==UCALL_ABORT )TEST_FAIL ("%s@%s:%ld" , (const char *)uc.args[0 ], __FILE__, uc.args[1 ]); -break ; -default : -TEST_FAIL ("Unhandled ucall: %lu" , uc.cmd); - } +} + +static void assert_vcpu_reset (struct kvm_vm *vm,uint32_t vcpuid) +{ +uint64_t obs_pc, obs_x0; -get_reg (vm,VCPU_ID_TARGET ,ARM64_CORE_REG (regs.pc), &obs_pc); -get_reg (vm,VCPU_ID_TARGET ,ARM64_CORE_REG (regs.regs[0 ]), &obs_x0); +get_reg (vm, vcpuid,ARM64_CORE_REG (regs.pc), &obs_pc); +get_reg (vm, vcpuid,ARM64_CORE_REG (regs.regs[0 ]), &obs_x0); TEST_ASSERT(obs_pc == CPU_ON_ENTRY_ADDR, "unexpected target cpu pc: %lx (expected: %lx)",
@@ -115,7 +95,50 @@ int main(void)TEST_ASSERT (obs_x0 ==CPU_ON_CONTEXT_ID ,"unexpected target context id: %lx (expected: %lx)" , obs_x0,CPU_ON_CONTEXT_ID ); +} + +static void guest_test_cpu_on (uint64_t target_cpu) +{ +uint64_t target_state; + +GUEST_ASSERT (!psci_cpu_on (target_cpu,CPU_ON_ENTRY_ADDR ,CPU_ON_CONTEXT_ID )); + +do { + target_state =psci_affinity_info (target_cpu,0 ); + +GUEST_ASSERT ((target_state ==PSCI_0_2_AFFINITY_LEVEL_ON ) || + (target_state ==PSCI_0_2_AFFINITY_LEVEL_OFF )); + }while (target_state !=PSCI_0_2_AFFINITY_LEVEL_ON ); + +GUEST_DONE (); +} + +static void host_test_cpu_on (void ) +{ +uint64_t target_mpidr; +struct kvm_vm *vm; +struct ucall uc; + + vm =setup_vm (guest_test_cpu_on); + +/* +* make sure the target is already off when executing the test. +*/ +vcpu_power_off (vm,VCPU_ID_TARGET ); + +get_reg (vm,VCPU_ID_TARGET ,KVM_ARM64_SYS_REG (SYS_MPIDR_EL1 ), &target_mpidr); +vcpu_args_set (vm,VCPU_ID_SOURCE ,1 , target_mpidr &MPIDR_HWID_BITMASK ); +enter_guest (vm,VCPU_ID_SOURCE ); + +if (get_ucall (vm,VCPU_ID_SOURCE , &uc) !=UCALL_DONE ) +TEST_FAIL ("Unhandled ucall: %lu" , uc.cmd); +assert_vcpu_reset (vm,VCPU_ID_TARGET );kvm_vm_free (vm); +} + +int main (void ) +{ +host_test_cpu_on ();return 0 ; }
Signature · 1 line
2.35.1.473.g83b2b277ed-goog
PATCH v3 19/19 selftests: KVM: Test SYSTEM_SUSPEND PSCI call
In reply to Oliver UptonAssert that the vCPU exits to userspace with KVM_SYSTEM_EVENT_SUSPEND if it correctly executes the SYSTEM_SUSPEND PSCI call. Additionally, assert that the guest PSCI call fails if preconditions are not met (more than 1 running vCPU).
--- .../testing/selftests/kvm/aarch64/psci_test.c | 74 +++++++++++++++++++ 1 file changed, 74 insertions(+)
tools/testing/selftests/kvm/aarch64/psci_test.c +74 -0
@@ -45,6 +45,16 @@ static uint64_t psci_affinity_info(uint64_t target_affinity,return res.a0; } +static uint64_t psci_system_suspend (uint64_t entry_addr,uint64_t context_id) +{ +struct arm_smccc_res res; + +smccc_hvc (PSCI_1_0_FN64_SYSTEM_SUSPEND , entry_addr, context_id, +0 ,0 ,0 ,0 ,0 , &res); + +return res.a0; +} +static void vcpu_power_off (struct kvm_vm *vm,uint32_t vcpuid) {struct kvm_mp_state mp_state = {
@@ -137,8 +147,72 @@ static void host_test_cpu_on(void)kvm_vm_free (vm); } +static void enable_system_suspend (struct kvm_vm *vm) +{ +struct kvm_enable_cap cap = { + .cap =KVM_CAP_ARM_SYSTEM_SUSPEND , + }; + +vm_enable_cap (vm, &cap); +} + +static void guest_test_system_suspend (void ) +{ +uint64_t r =psci_system_suspend (CPU_ON_ENTRY_ADDR ,CPU_ON_CONTEXT_ID ); + +GUEST_SYNC (r); +} + +static void host_test_system_suspend (void ) +{ +struct kvm_run *run; +struct kvm_vm *vm; + + vm =setup_vm (guest_test_system_suspend); +enable_system_suspend (vm); + +vcpu_power_off (vm,VCPU_ID_TARGET ); + run =vcpu_state (vm,VCPU_ID_SOURCE ); + +enter_guest (vm,VCPU_ID_SOURCE ); + +TEST_ASSERT (run->exit_reason ==KVM_EXIT_SYSTEM_EVENT , +"Unhandled exit reason: %u (%s)" , + run->exit_reason,exit_reason_str (run->exit_reason)); +TEST_ASSERT (run->system_event.type ==KVM_SYSTEM_EVENT_SUSPEND , +"Unhandled system event: %u (expected: %u)" , + run->system_event.type,KVM_SYSTEM_EVENT_SUSPEND ); + +kvm_vm_free (vm); +} + +static void host_test_system_suspend_fails (void ) +{ +struct kvm_vm *vm; +struct ucall uc; + + vm =setup_vm (guest_test_system_suspend); +enable_system_suspend (vm); + +enter_guest (vm,VCPU_ID_SOURCE ); +TEST_ASSERT (get_ucall (vm,VCPU_ID_SOURCE , &uc) ==UCALL_SYNC , +"Unhandled ucall: %lu" , uc.cmd); +TEST_ASSERT (uc.args[1 ] ==PSCI_RET_DENIED , +"Unrecognized PSCI return code: %lu (expected: %u)" , + uc.args[1 ],PSCI_RET_DENIED ); + +kvm_vm_free (vm); +} +int main (void ) { +if (!kvm_check_cap (KVM_CAP_ARM_SYSTEM_SUSPEND )) { +print_skip ("KVM_CAP_ARM_SYSTEM_SUSPEND not supported" ); +exit (KSFT_SKIP ); + } +host_test_cpu_on (); +host_test_system_suspend (); +host_test_system_suspend_fails ();return 0 ; }
Signature · 1 line
2.35.1.473.g83b2b277ed-goog