RZN1 USB Host support

deleted file mode 100644
index aeba38f0a387..000000000000
@@ -1,84 +0,0 @@
-Renesas AHB to PCI bridge
--------------------------
-
-This is the bridge used internally to connect the USB controllers to the
-AHB. There is one bridge instance per USB port connected to the internal
-OHCI and EHCI controllers.
-
-Required properties:
-- compatible: "renesas,pci-r8a7742" for the R8A7742 SoC;
-	      "renesas,pci-r8a7743" for the R8A7743 SoC;
-	      "renesas,pci-r8a7744" for the R8A7744 SoC;
-	      "renesas,pci-r8a7745" for the R8A7745 SoC;
-	      "renesas,pci-r8a7790" for the R8A7790 SoC;
-	      "renesas,pci-r8a7791" for the R8A7791 SoC;
-	      "renesas,pci-r8a7793" for the R8A7793 SoC;
-	      "renesas,pci-r8a7794" for the R8A7794 SoC;
-	      "renesas,pci-rcar-gen2" for a generic R-Car Gen2 or
-				      RZ/G1 compatible device.
-
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg:	A list of physical regions to access the device: the first is
-	the operational registers for the OHCI/EHCI controllers and the
-	second is for the bridge configuration and control registers.
-- interrupts: interrupt for the device.
-- clocks: The reference to the device clock.
-- bus-range: The PCI bus number range; as this is a single bus, the range
-	     should be specified as the same value twice.
-- #address-cells: must be 3.
-- #size-cells: must be 2.
-- #interrupt-cells: must be 1.
-- interrupt-map: standard property used to define the mapping of the PCI
-  interrupts to the GIC interrupts.
-- interrupt-map-mask: standard property that helps to define the interrupt
-  mapping.
-
-Optional properties:
-- dma-ranges: a single range for the inbound memory region. If not supplied,
-  defaults to 1GiB at 0x40000000. Note there are hardware restrictions on the
-  allowed combinations of address and size.
-
-Example SoC configuration:
-
-	pci0: pci@ee090000  {
-		compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
-		reg = <0x0 0xee090000 0x0 0xc00>,
-		      <0x0 0xee080000 0x0 0x1100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
-
-		usb@1,0 {
-			reg = <0x800 0 0 0 0>;
-			phys = <&usb0 0>;
-			phy-names = "usb";
-		};
-
-		usb@2,0 {
-			reg = <0x1000 0 0 0 0>;
-			phys = <&usb0 0>;
-			phy-names = "usb";
-		};
-	};
-
-Example board setup:
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};

156 lines not on this page · raw message

index 494eb975c146..90b42d44c582 100644
@@ -32,6 +32,10 @@ properties:
               - renesas,pci-r8a7793      # R-Car M2-N
               - renesas,pci-r8a7794      # R-Car E2
           - const: renesas,pci-rcar-gen2 # R-Car Gen2 and RZ/G1
+      - items:
+          - enum:
+              - renesas,pci-r9a06g032     # RZ/N1D
+          - const: renesas,pci-rzn1       # RZ/N1
 
   reg:
     items:

@@ -41,13 +45,9 @@ properties:
   interrupts:
     maxItems: 1
 
-  clocks:
-    items:
-      - description: Device clock
+  clocks: true
 
-  clock-names:
-    items:
-      - const: pclk
+  clock-names: true
 
   resets:
     maxItems: 1

@@ -106,13 +106,45 @@ required:
   - interrupt-map
   - interrupt-map-mask
   - clocks
-  - resets
   - power-domains
   - bus-range
   - "#address-cells"
   - "#size-cells"
   - "#interrupt-cells"
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,pci-rzn1
+
+then:
+  properties:
+    clocks:
+      items:
+        - description: Internal bus clock (AHB) for HOST
+        - description: Internal bus clock (AHB) Power Management
+        - description: PCI clock for USB subsystem
+    clock-names:
+      items:
+        - const: usb_hclkh
+        - const: usb_hclkpm
+        - const: usb_pciclk
+  required:
+    - clock-names
+
+else:
+  properties:
+    clocks:
+      items:
+        - description: Device clock
+    clock-names:
+      items:
+        - const: pclk
+  required:
+    - resets
+
 unevaluatedProperties: false
 
 examples:

index 636a6ab31c58..a11a50426a8e 100644
@@ -93,6 +93,35 @@ sysctrl: system-controller@4000c000 {
 			clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
 		};
 
+		pci_usb: pci@40030000 {
+			compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1";
+			device_type = "pci";
+			clocks = <&sysctrl R9A06G032_HCLK_USBH>,
+				 <&sysctrl R9A06G032_HCLK_USBPM>,
+				 <&sysctrl R9A06G032_CLK_PCI_USB>;
+			clock-names = "usb_hclkh", "usb_hclkpm", "usb_pciclk";
+			power-domains = <&sysctrl>;
+			reg = <0x40030000 0xc00>,
+			      <0x40020000 0x1100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>;
+			/* Should map all possible DDR as inbound ranges, but
+			 * the IP only supports a 256MB, 512MB, or 1GB window.
+			 * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit)
+			 */
+			dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
+					 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
+					 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		uart0: serial@40060000 {
 			compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
 			reg = <0x40060000 0x400>;

index a11a50426a8e..dd4b1ddd3601 100644
@@ -254,4 +254,10 @@ timer {
 			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 	};
+
+	usbphy: usb-phy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		status = "disabled";
+	};
 };

index dd4b1ddd3601..ad04093b01f4 100644
@@ -120,6 +120,18 @@ pci_usb: pci@40030000 {
 			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
 					 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
 					 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usbphy>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usbphy>;
+				phy-names = "usb";
+			};
 		};
 
 		uart0: serial@40060000 {