Add R16 Vista E board from RenewWorldOutreach
Subsystems (3)
v3 cover Add R16 Vista E board from RenewWorldOutreach
This patch series adds the R16-Vista-E board from RenewWorldOutreach based on allwinner R16(A33).
Patch 1/2 adds the dt-bindings for the board.
Patch 2/2 adds the board with the following below features:
General features:
- 1GB RAM
- microSD slot
- Realtek Wifi
- 1 x USB 2.0
- HDMI IN
- HDMI OUT
- Audio out
- MIPI DSI
- TI DLPC3433
It has also connectors to connect an external mini keypad.
v2 patches can be found here:
https://lore.kernel.org/all/[email protected]/
Suniel Mahesh (2):
dt-bindings: arm: sunxi: Add binding for RenewWorldOutReach
R16-Vista-E board
ARM: dts: sun8i: Add R16 Vista E board from RenewWorldOutreach
.../devicetree/bindings/arm/sunxi.yaml | 6 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts | 362 ++++++++++++++++++ 4 files changed, 371 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts
Signature · 1 line
2.25.1
PATCH v3 1/2 dt-bindings: arm: sunxi: Add binding for RenewWorldOutReach R16-Vista-E board
Add a binding for the RenewWorldOutReach R16-Vista-E board based on allwinner R16.
---
Changes for v3:
- As suggested by Samuel Holland:
- vendor prefix documented
- primary author of the commit should be the first signer
Changes for v2:
- Add missing compatible string
- insert missing signatures of contributors
--- Documentation/devicetree/bindings/arm/sunxi.yaml | 6 ++++++ Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 2 files changed, 8 insertions(+)
Documentation/devicetree/bindings/arm/sunxi.yaml +6 -0
@@ -787,6 +787,12 @@ properties: - const: allwinner,r7-tv-dongle - const: allwinner,sun5i-a10s + - description: RenewWorldOutreach R16-Vista-E + items: + - const: renewworldoutreach,r16-vista-e + - const: allwinner,sun8i-r16 + - const: allwinner,sun8i-a33 + - description: RerVision H3-DVK items: - const: rervision,h3-dvk
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -1030,6 +1030,8 @@ patternProperties: description: reMarkable AS "^renesas,.*": description: Renesas Electronics Corporation + "^renewworldoutreach,.*": + description: RENEW WORLD OUTREACH "^rex,.*": description: iMX6 Rex Project "^rervision,.*":
Signature · 1 line
2.25.1
Re: [PATCH v3 1/2] dt-bindings: arm: sunxi: Add binding for RenewWorldOutReach R16-Vista-E board
Hi all,
Can you guys please review and comment for any changes.
Regards
Suniel
Quoted 57 lines · Suniel Mahesh
Add a binding for the RenewWorldOutReach R16-Vista-E board based on allwinner R16.
Signed-off-by Suniel Mahesh <[email protected]>Signed-off-by Jagan Teki <[email protected]>Signed-off-by Christopher Vollo <[email protected]>Acked-by Rob Herring <[email protected]>---
Changes for v3:
- As suggested by Samuel Holland:
- vendor prefix documented
- primary author of the commit should be the first signerChanges for v2:
- Add missing compatible string
- insert missing signatures of contributors--- Documentation/devicetree/bindings/arm/sunxi.yaml | 6 ++++++ Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 2 files changed, 8 insertions(+)Documentation/devicetree/bindings/arm/sunxi.yaml +6
-0@@ -787,6 +787,12 @@ properties: - const: allwinner,r7-tv-dongle - const: allwinner,sun5i-a10s + - description: RenewWorldOutreach R16-Vista-E + items: + - const: renewworldoutreach,r16-vista-e + - const: allwinner,sun8i-r16 + - const: allwinner,sun8i-a33 + - description: RerVision H3-DVK items: - const: rervision,h3-dvkDocumentation/devicetree/bindings/vendor-prefixes.yaml +2
-1@@ -1030,6 +1030,8 @@ patternProperties: description: reMarkable AS "^renesas,.*": description: Renesas Electronics Corporation + "^renewworldoutreach,.*": + description: RENEW WORLD OUTREACH "^rex,.*": description: iMX6 Rex Project "^rervision,.*": --2.25.1
PATCH v3 2/2 ARM: dts: sun8i: Add R16 Vista E board from RenewWorldOutreach
In reply to Suniel MaheshThe R16-Vista-E board from RenewWorldOutreach based on allwinner R16(A33).
General features:
- 1GB RAM
- microSD slot
- Realtek Wifi
- 1 x USB 2.0
- HDMI IN
- HDMI OUT
- Audio out
- MIPI DSI
- TI DLPC3433
It has also connectors to connect an external mini keypad.
---
Changes for v3:
- As suggested by Samuel Holland:
- changed binding to gpio-fan
- changed widgets to DACL and DACR to describe audio routing
- fixed indentation
- primary author of the commit should be the first signer
Changes for v2:
- Add missing compatible string
- insert missing signatures of contributors
--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts | 362 ++++++++++++++++++ 2 files changed, 363 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -1353,6 +1353,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-r16-nintendo-nes-classic.dtb \ sun8i-r16-nintendo-super-nes-classic.dtb \ sun8i-r16-parrot.dtb \ + sun8i-r16-renew-vista-e.dtb \ sun8i-r40-bananapi-m2-ultra.dtb \ sun8i-r40-oka40i-c.dtb \ sun8i-s3-elimo-initium.dtb \
arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts new file +362 -0
362 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [PATCH v3 2/2] ARM: dts: sun8i: Add R16 Vista E board from RenewWorldOutreach
Hi all,
Can you guys please review and comment for any changes.
Regards
Suniel
Quoted 423 lines · Suniel Mahesh
The R16-Vista-E board from RenewWorldOutreach based on allwinner R16(A33).
General features:
- 1GB RAM
- microSD slot
- Realtek Wifi
- 1 x USB 2.0
- HDMI IN
- HDMI OUT
- Audio out
- MIPI DSI
- TI DLPC3433It has also connectors to connect an external mini keypad.
Signed-off-by Suniel Mahesh <[email protected]>Signed-off-by Jagan Teki <[email protected]>Signed-off-by Christopher Vollo <[email protected]>---
Changes for v3:
- As suggested by Samuel Holland:
- changed binding to gpio-fan
- changed widgets to DACL and DACR to describe audio routing
- fixed indentation
- primary author of the commit should be the first signerChanges for v2:
- Add missing compatible string
- insert missing signatures of contributors--- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts | 362 ++++++++++++++++++ 2 files changed, 363 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-r16-renew-vista-e.dtsarch/arm/boot/dts/Makefile +1
-0@@ -1353,6 +1353,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-r16-nintendo-nes-classic.dtb \ sun8i-r16-nintendo-super-nes-classic.dtb \ sun8i-r16-parrot.dtb \ + sun8i-r16-renew-vista-e.dtb \ sun8i-r40-bananapi-m2-ultra.dtb \ sun8i-r40-oka40i-c.dtb \ sun8i-s3-elimo-initium.dtb \arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts new file +16
-0@@ -0,0 +1,362 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2022 RenewWorldOutreach + * Copyright (C) 2022 Amarula Solutions(India) + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "RenewWorldOutreach R16-Vista-E"; + compatible = "renewworldoutreach,r16-vista-e","allwinner,sun8i-r16", "allwinner,sun8i-a33";
arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts new file +131
-0+ + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + ok { + label = "ok"; + linux,code = <KEY_ENTER>; + gpios = <&pio 4 0 GPIO_ACTIVE_LOW>; + }; + + left { + label = "left"; + linux,code = <KEY_LEFT>; + gpios = <&pio 4 1 GPIO_ACTIVE_LOW>; + }; + + right { + label = "right"; + linux,code = <KEY_RIGHT>; + gpios = <&pio 4 2 GPIO_ACTIVE_LOW>; + }; + + up { + label = "up"; + linux,code = <KEY_UP>; + gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; + }; + + down { + label = "down"; + linux,code = <KEY_DOWN>; + gpios = <&pio 4 4 GPIO_ACTIVE_LOW>; + }; + + back { + label = "back"; + linux,code = <KEY_BACK>; + gpios = <&pio 4 5 GPIO_ACTIVE_LOW>; + }; + + power { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&pio 4 6 GPIO_ACTIVE_LOW>; + }; + + vol-down { + label = "vol-down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pio 7 3 GPIO_ACTIVE_LOW>; + }; + + vol-up { + label = "vol-up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + battery-led0 { + label = "renew-e:battery-led0"; + gpios = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; + }; + + battery-led1 { + label = "renew-e:battery-led1"; + gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; + }; + + battery-led2 { + label = "renew-e:battery-led2"; + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; + }; + + battery-led3 { + label = "renew-e:battery-led3"; + gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; + }; + + battery-led4 { + label = "renew-e:battery-led4"; + gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; + }; + + volume-led0 { + label = "renew-e:volume-led0"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + }; + + volume-led1 { + label = "renew-e:volume-led1"; + gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; + }; + + volume-led2 { + label = "renew-e:volume-led2"; + gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; + }; + + volume-led3 { + label = "renew-e:volume-led3"; + gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; + }; + + volume-led4 { + label = "renew-e:volume-led4"; + gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; + }; + + led-pad-intz { + label = "renew-e:led-pad-intz"; + gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* FAN_ON/OFF: PE14*/
arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts new file +215
-1+ gpio-fan,speed-map = <0 0 6000 1>; + }; + + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + +&cpu0_opp_table { + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <1320000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1320000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; +}; + +&dai { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&dphy { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pg_pins>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp223.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-main1"; +}; + +®_dldo2 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-main2"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-main3"; +}; + +®_dldo4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-main4"; +}; + +®_eldo1 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hdmi"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&sound { + status = "okay"; + simple-audio-card,routing = + "Left DAC", "DACL", + "Right DAC", "DACR"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + /* VBUS is always on because it is wired to the power supply */ + usb0_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; --2.25.1
Hi all,
Can you guys please review and comment for any changes.
Regards
Suniel
Quoted 40 lines · Suniel Mahesh
This patch series adds the R16-Vista-E board from RenewWorldOutreach based on allwinner R16(A33).
Patch 1/2 adds the dt-bindings for the board.
Patch 2/2 adds the board with the following below features:
General features:
- 1GB RAM
- microSD slot
- Realtek Wifi
- 1 x USB 2.0
- HDMI IN
- HDMI OUT
- Audio out
- MIPI DSI
- TI DLPC3433It has also connectors to connect an external mini keypad.
v2 patches can be found here:
https://lore.kernel.org/all/[email protected]/
Suniel Mahesh (2):
dt-bindings: arm: sunxi: Add binding for RenewWorldOutReach
R16-Vista-E board
ARM: dts: sun8i: Add R16 Vista E board from RenewWorldOutreach.../devicetree/bindings/arm/sunxi.yaml | 6 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts | 362 ++++++++++++++++++ 4 files changed, 371 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts--
2.25.1