Skip to contentSkip to conversation

Add R16 Vista E board from RenewWorldOutreach

PATCH In review Suniel Mahesh 1 participant 6 messages Jul 11, 2022 – Aug 5, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v3 cover Add R16 Vista E board from RenewWorldOutreach

This patch series adds the R16-Vista-E board from RenewWorldOutreach based on allwinner R16(A33).

Patch 1/2 adds the dt-bindings for the board.

Patch 2/2 adds the board with the following below features:

General features:
- 1GB RAM
- microSD slot
- Realtek Wifi
- 1 x USB 2.0
- HDMI IN
- HDMI OUT
- Audio out
- MIPI DSI
- TI DLPC3433

It has also connectors to connect an external mini keypad.

v2 patches can be found here:
https://lore.kernel.org/all/[email protected]/

Suniel Mahesh (2):
dt-bindings: arm: sunxi: Add binding for RenewWorldOutReach
R16-Vista-E board
ARM: dts: sun8i: Add R16 Vista E board from RenewWorldOutreach

 .../devicetree/bindings/arm/sunxi.yaml        |   6 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts | 362 ++++++++++++++++++
 4 files changed, 371 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts
Signature · 1 line
2.25.1
#1 lore raw

PATCH v3 1/2 dt-bindings: arm: sunxi: Add binding for RenewWorldOutReach R16-Vista-E board

Add a binding for the RenewWorldOutReach R16-Vista-E board based on allwinner R16.

---
Changes for v3:
- As suggested by Samuel Holland:
- vendor prefix documented
- primary author of the commit should be the first signer

Changes for v2:
- Add missing compatible string
- insert missing signatures of contributors

---
 Documentation/devicetree/bindings/arm/sunxi.yaml       | 6 ++++++
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 2 files changed, 8 insertions(+)
Documentation/devicetree/bindings/arm/sunxi.yaml +6 -0
index 95278a6a9a8e..52b8c9aba6f3 100644
@@ -787,6 +787,12 @@ properties:
           - const: allwinner,r7-tv-dongle
           - const: allwinner,sun5i-a10s
 
+      - description: RenewWorldOutreach R16-Vista-E
+        items:
+          - const: renewworldoutreach,r16-vista-e
+          - const: allwinner,sun8i-r16
+          - const: allwinner,sun8i-a33
+
       - description: RerVision H3-DVK
         items:
           - const: rervision,h3-dvk
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
index 6bb20b4554d7..f5cd0acb1036 100644
@@ -1030,6 +1030,8 @@ patternProperties:
     description: reMarkable AS
   "^renesas,.*":
     description: Renesas Electronics Corporation
+  "^renewworldoutreach,.*":
+    description: RENEW WORLD OUTREACH
   "^rex,.*":
     description: iMX6 Rex Project
   "^rervision,.*":
Signature · 1 line
2.25.1
#2 lore raw

Re: [PATCH v3 1/2] dt-bindings: arm: sunxi: Add binding for RenewWorldOutReach R16-Vista-E board

Hi all,

Can you guys please review and comment for any changes.

Regards
Suniel

Quoted 57 lines · Suniel Mahesh

Add a binding for the RenewWorldOutReach R16-Vista-E board based on allwinner R16.

---
Changes for v3:
- As suggested by Samuel Holland:
- vendor prefix documented
- primary author of the commit should be the first signer

Changes for v2:
- Add missing compatible string
- insert missing signatures of contributors

---
 Documentation/devicetree/bindings/arm/sunxi.yaml       | 6 ++++++
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 2 files changed, 8 insertions(+)
Documentation/devicetree/bindings/arm/sunxi.yaml +6 -0
index 95278a6a9a8e..52b8c9aba6f3 100644
@@ -787,6 +787,12 @@ properties:
           - const: allwinner,r7-tv-dongle
           - const: allwinner,sun5i-a10s
 
+      - description: RenewWorldOutreach R16-Vista-E
+        items:
+          - const: renewworldoutreach,r16-vista-e
+          - const: allwinner,sun8i-r16
+          - const: allwinner,sun8i-a33
+
       - description: RerVision H3-DVK
         items:
           - const: rervision,h3-dvk
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -1
index 6bb20b4554d7..f5cd0acb1036 100644
@@ -1030,6 +1030,8 @@ patternProperties:
     description: reMarkable AS
   "^renesas,.*":
     description: Renesas Electronics Corporation
+  "^renewworldoutreach,.*":
+    description: RENEW WORLD OUTREACH
   "^rex,.*":
     description: iMX6 Rex Project
   "^rervision,.*":
--

2.25.1

#3 lore raw

PATCH v3 2/2 ARM: dts: sun8i: Add R16 Vista E board from RenewWorldOutreach

In reply to Suniel Mahesh

The R16-Vista-E board from RenewWorldOutreach based on allwinner R16(A33).

General features:
- 1GB RAM
- microSD slot
- Realtek Wifi
- 1 x USB 2.0
- HDMI IN
- HDMI OUT
- Audio out
- MIPI DSI
- TI DLPC3433

It has also connectors to connect an external mini keypad.

---
Changes for v3:
- As suggested by Samuel Holland:
- changed binding to gpio-fan
- changed widgets to DACL and DACR to describe audio routing
- fixed indentation
- primary author of the commit should be the first signer

Changes for v2:
- Add missing compatible string
- insert missing signatures of contributors

---
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts | 362 ++++++++++++++++++
 2 files changed, 363 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts
arch/arm/boot/dts/Makefile +1 -0
index 184899808ee7..b5966c0742e1 100644
@@ -1353,6 +1353,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-r16-nintendo-nes-classic.dtb \
 	sun8i-r16-nintendo-super-nes-classic.dtb \
 	sun8i-r16-parrot.dtb \
+	sun8i-r16-renew-vista-e.dtb \
 	sun8i-r40-bananapi-m2-ultra.dtb \
 	sun8i-r40-oka40i-c.dtb \
 	sun8i-s3-elimo-initium.dtb \
arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts new file +362 -0

362 lines not on this page · raw message

Signature · 1 line
2.25.1
#4 lore raw

Re: [PATCH v3 2/2] ARM: dts: sun8i: Add R16 Vista E board from RenewWorldOutreach

Hi all,

Can you guys please review and comment for any changes.

Regards
Suniel

Quoted 423 lines · Suniel Mahesh

The R16-Vista-E board from RenewWorldOutreach based on allwinner R16(A33).

General features:
- 1GB RAM
- microSD slot
- Realtek Wifi
- 1 x USB 2.0
- HDMI IN
- HDMI OUT
- Audio out
- MIPI DSI
- TI DLPC3433

It has also connectors to connect an external mini keypad.

---
Changes for v3:
- As suggested by Samuel Holland:
- changed binding to gpio-fan
- changed widgets to DACL and DACR to describe audio routing
- fixed indentation
- primary author of the commit should be the first signer

Changes for v2:
- Add missing compatible string
- insert missing signatures of contributors

---
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts | 362 ++++++++++++++++++
 2 files changed, 363 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts
arch/arm/boot/dts/Makefile +1 -0
index 184899808ee7..b5966c0742e1 100644
@@ -1353,6 +1353,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
        sun8i-r16-nintendo-nes-classic.dtb \
        sun8i-r16-nintendo-super-nes-classic.dtb \
        sun8i-r16-parrot.dtb \
+       sun8i-r16-renew-vista-e.dtb \
        sun8i-r40-bananapi-m2-ultra.dtb \
        sun8i-r40-oka40i-c.dtb \
        sun8i-s3-elimo-initium.dtb \
arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts new file +16 -0
new file mode 100644
index 000000000000..ff72914eb110
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2022 RenewWorldOutreach
+ * Copyright (C) 2022 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+       model = "RenewWorldOutreach R16-Vista-E";
+       compatible = "renewworldoutreach,r16-vista-e",

"allwinner,sun8i-r16", "allwinner,sun8i-a33";

arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts new file +131 -0
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               poll-interval = <100>;
+
+               ok {
+                       label = "ok";
+                       linux,code = <KEY_ENTER>;
+                       gpios = <&pio 4 0 GPIO_ACTIVE_LOW>;
+               };
+
+               left {
+                       label = "left";
+                       linux,code = <KEY_LEFT>;
+                       gpios = <&pio 4 1 GPIO_ACTIVE_LOW>;
+               };
+
+               right {
+                       label = "right";
+                       linux,code = <KEY_RIGHT>;
+                       gpios = <&pio 4 2 GPIO_ACTIVE_LOW>;
+               };
+
+               up {
+                       label = "up";
+                       linux,code = <KEY_UP>;
+                       gpios = <&pio 4 3 GPIO_ACTIVE_LOW>;
+               };
+
+               down {
+                       label = "down";
+                       linux,code = <KEY_DOWN>;
+                       gpios = <&pio 4 4 GPIO_ACTIVE_LOW>;
+               };
+
+               back {
+                       label = "back";
+                       linux,code = <KEY_BACK>;
+                       gpios = <&pio 4 5 GPIO_ACTIVE_LOW>;
+               };
+
+               power {
+                       label = "power";
+                       linux,code = <KEY_POWER>;
+                       gpios = <&pio 4 6 GPIO_ACTIVE_LOW>;
+               };
+
+               vol-down {
+                       label = "vol-down";
+                       linux,code = <KEY_VOLUMEDOWN>;
+                       gpios = <&pio 7 3 GPIO_ACTIVE_LOW>;
+               };
+
+               vol-up {
+                       label = "vol-up";
+                       linux,code = <KEY_VOLUMEUP>;
+                       gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               battery-led0 {
+                       label = "renew-e:battery-led0";
+                       gpios = <&r_pio 0 2 GPIO_ACTIVE_HIGH>;
+               };
+
+               battery-led1 {
+                       label = "renew-e:battery-led1";
+                       gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>;
+               };
+
+               battery-led2 {
+                       label = "renew-e:battery-led2";
+                       gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>;
+               };
+
+               battery-led3 {
+                       label = "renew-e:battery-led3";
+                       gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
+               };
+
+               battery-led4 {
+                       label = "renew-e:battery-led4";
+                       gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
+               };
+
+               volume-led0 {
+                       label = "renew-e:volume-led0";
+                       gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+               };
+
+               volume-led1 {
+                       label = "renew-e:volume-led1";
+                       gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+               };
+
+               volume-led2 {
+                       label = "renew-e:volume-led2";
+                       gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>;
+               };
+
+               volume-led3 {
+                       label = "renew-e:volume-led3";
+                       gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+               };
+
+               volume-led4 {
+                       label = "renew-e:volume-led4";
+                       gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>;
+               };
+
+               led-pad-intz {
+                       label = "renew-e:led-pad-intz";
+                       gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+       };
+
+       gpio-fan {
+               compatible = "gpio-fan";
+               gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* FAN_ON/OFF: PE14

*/

arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts new file +215 -1
+               gpio-fan,speed-map = <0 0 6000 1>;
+       };
+
+       reg_vcc5v0: vcc5v0 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc5v0";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+       };
+};
+
+&codec {
+       status = "okay";
+};
+
+&cpu0 {
+       cpu-supply = <&reg_dcdc3>;
+};
+
+&cpu0_opp_table {
+       opp-1104000000 {
+               opp-hz = /bits/ 64 <1104000000>;
+               opp-microvolt = <1320000>;
+               clock-latency-ns = <244144>; /* 8 32k periods */
+       };
+
+       opp-1200000000 {
+               opp-hz = /bits/ 64 <1200000000>;
+               opp-microvolt = <1320000>;
+               clock-latency-ns = <244144>; /* 8 32k periods */
+       };
+};
+
+&dai {
+       status = "okay";
+};
+
+&de {
+       status = "okay";
+};
+
+&dphy {
+       status = "okay";
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&mmc0 {
+       vmmc-supply = <&reg_dcdc1>;
+       bus-width = <4>;
+       non-removable;
+       status = "okay";
+};
+
+&mmc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc1_pg_pins>;
+       vmmc-supply = <&reg_dcdc1>;
+       bus-width = <4>;
+       broken-cd;
+       status = "okay";
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&r_rsb {
+       status = "okay";
+
+       axp22x: pmic@3a3 {
+               compatible = "x-powers,axp223";
+               reg = <0x3a3>;
+               interrupt-parent = <&r_intc>;
+               interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+               eldoin-supply = <&reg_dcdc1>;
+               x-powers,drive-vbus-en;
+       };
+};
+
+#include "axp223.dtsi"
+
+&ac_power_supply {
+       status = "okay";
+};
+
+&reg_aldo1 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <2500000>;
+       regulator-max-microvolt = <2500000>;
+       regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+       regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+       regulator-always-on;
+       regulator-min-microvolt = <900000>;
+       regulator-max-microvolt = <1400000>;
+       regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+       regulator-always-on;
+       regulator-min-microvolt = <900000>;
+       regulator-max-microvolt = <1400000>;
+       regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+       regulator-always-on;
+       regulator-min-microvolt = <900000>;
+       regulator-max-microvolt = <1400000>;
+       regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+       regulator-always-on;
+       regulator-min-microvolt = <1500000>;
+       regulator-max-microvolt = <1500000>;
+       regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+       regulator-always-on;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-3v3-main1";
+};
+
+&reg_dldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-3v3-main2";
+};
+
+&reg_dldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-3v3-main3";
+};
+
+&reg_dldo4 {
+       regulator-always-on;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-3v3-main4";
+};
+
+&reg_eldo1 {
+       regulator-always-on;
+       regulator-min-microvolt = <1200000>;
+       regulator-max-microvolt = <1200000>;
+       regulator-name = "vcc-1v2-hdmi";
+};
+
+&reg_drivevbus {
+       regulator-name = "usb0-vbus";
+       status = "okay";
+};
+
+&reg_rtc_ldo {
+       regulator-name = "vcc-rtc";
+};
+
+&sound {
+       status = "okay";
+       simple-audio-card,routing =
+               "Left DAC", "DACL",
+               "Right DAC", "DACR";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pb_pins>;
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "host";
+       status = "okay";
+};
+
+&usbphy {
+       /* VBUS is always on because it is wired to the power supply */
+       usb0_vbus-supply = <&reg_vcc5v0>;
+       status = "okay";
+};
--

2.25.1

#5 lore raw
In reply to Suniel Mahesh

Hi all,

Can you guys please review and comment for any changes.

Regards
Suniel

Quoted 40 lines · Suniel Mahesh

This patch series adds the R16-Vista-E board from RenewWorldOutreach based on allwinner R16(A33).

Patch 1/2 adds the dt-bindings for the board.

Patch 2/2 adds the board with the following below features:

General features:
- 1GB RAM
- microSD slot
- Realtek Wifi
- 1 x USB 2.0
- HDMI IN
- HDMI OUT
- Audio out
- MIPI DSI
- TI DLPC3433

It has also connectors to connect an external mini keypad.

v2 patches can be found here:

https://lore.kernel.org/all/[email protected]/

Suniel Mahesh (2):
dt-bindings: arm: sunxi: Add binding for RenewWorldOutReach
R16-Vista-E board
ARM: dts: sun8i: Add R16 Vista E board from RenewWorldOutreach

 .../devicetree/bindings/arm/sunxi.yaml        |   6 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   1 +
 arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts | 362 ++++++++++++++++++
 4 files changed, 371 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-r16-renew-vista-e.dts

--
2.25.1