imx8mn-venice-u-boot: Fix broken boot
Subsystems (2)
PATCH v2 1/1 imx8mn-venice-u-boot: Fix broken boot
When the imx8mn.dtsi file was pulled in from Linux, the UARTs were moved into an spba sub-node which wasn't being included in the SPL device tree. This meant the references to the UART weren't being handled properly and when booting the system would constantly reboot. Fix this by adding the spba node to the spl device tree to restore normal booting.
Based on the patch from Adam Ford for the imx8mn-beacon-kit-u-boot board.
---
Changes since v1:
- Fix typo in commit log: imx8mm.dtsi--> imx8mn.dtsi
Hi Tim,
Could you please test this patch?
It fixes boot regression on imx8mn-evk and imx8mn-beacon.
arch/arm/dts/imx8mn-venice-u-boot.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/dts/imx8mn-venice-u-boot.dtsi +4 -0
@@ -20,6 +20,10 @@ u-boot,dm-spl; }; +&spba1 { + u-boot,dm-spl; +}; + &clk { u-boot,dm-spl; u-boot,dm-pre-reloc;
Signature · 1 line
2.25.1
Quoted 7 lines · Fabio Estevam
When the
imx8mn.dtsifile was pulled in from Linux, the UARTs were moved into an spba sub-node which wasn't being included in the SPL device tree. This meant the references to the UART weren't being handled properly and when booting the system would constantly reboot. Fix this by adding the spba node to the spl device tree to restore normal booting.
Quoted 5 lines
Based on the patch from Adam Ford for the imx8mn-beacon-kit-u-boot board.
Fixes 4e5114daf9eb ("imx8mn: synchronise device tree with linux")Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom