Skip to contentSkip to conversation

arm: mediatek: add mt8195 SOC support

PATCH In review Macpaul Lin 7 participants 9 messages Aug 4, 2023 – Jun 20, 2024

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v5 1/2 arm: mediatek: add mt8195 SOC support

From: Fabien Parent <[email protected]>

The MediaTek MT8195 is a ARM64-based SoC with a quad-core Cortex-A73 and a quad-core Cortex-A53. It is including UART, SPI, USB3.0 device and hosts, SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LPDDR3 and LPDDR4 options.

---
 MAINTAINERS                            |   2 +
 arch/arm/dts/mt8195.dtsi               | 370 +++++++++++++++++++++++++
 arch/arm/mach-mediatek/Kconfig         |  13 +-
 arch/arm/mach-mediatek/Makefile        |   1 +
 arch/arm/mach-mediatek/mt8195/Kconfig  |  13 +
 arch/arm/mach-mediatek/mt8195/Makefile |   3 +
 arch/arm/mach-mediatek/mt8195/init.c   |  97 +++++++
 7 files changed, 498 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/mt8195.dtsi
 create mode 100644 arch/arm/mach-mediatek/mt8195/Kconfig
 create mode 100644 arch/arm/mach-mediatek/mt8195/Makefile
 create mode 100644 arch/arm/mach-mediatek/mt8195/init.c

Changes for v2:
- Correct node name to t-phy for u3phy0.
- Add platform compatible string "mediatek,mt8195-tphy" to all usb phy nodes.
- remove clock nodes that software cannot controlled in phy nodes.
- Test and add back "mac" for HOST only xhci nodes.

Changes for v3:
- Revise device node name from "xhciX: xhciX@" to "xhciX: xhci@".

Changes for v4:
- No change.

Changes for v5:
- Fix Copyright year to 2023.
- Fix memory map in dram_init() to support 8GB onboard memory.
- Add '#if !IS_ENABLED(CONFIG_SYSRESET)' with reset_cpu().
- Correct reset_cpu() function prototype.
- rebase patchset to v2023-10.rc1
- Add missing arch/arm/mach-mediatek/mt8195/Kconfig.

MAINTAINERS +2 -0
index 47581cf6fb..4d0f017e7e 100644
@@ -369,8 +369,10 @@ ARM MEDIATEK
 M:	Ryder Lee <[email protected]>
 M:	Weijie Gao <[email protected]>
 M:	Chunfeng Yun <[email protected]>
+M:	Macpaul Lin <[email protected]>
 R:	GSS_MTK_Uboot_upstream <[email protected]>
 S:	Maintained
+F:	arch/arm/dts/mt8195.dtsi
 F:	arch/arm/mach-mediatek/
 F:	arch/arm/include/asm/arch-mediatek/
 F:	board/mediatek/
arch/arm/dts/mt8195.dtsi new file +370 -0

370 lines not on this page · raw message

arch/arm/mach-mediatek/Kconfig +12 -1
index 04aa2fd97f..3a2af1cdee 100644
@@ -67,6 +67,15 @@ config TARGET_MT8183
 	  SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LPDDR3
 	  and LPDDR4 options.
 
+config TARGET_MT8195
+	bool "MediaTek MT8195 SoC"
+	select ARM64
+	help
+	  The MediaTek MT8195 is a ARM64-based SoC with a quad-core Cortex-A73 and
+	  a quad-core Cortex-A53. It is including UART, SPI, USB3.0 device and hosts,
+	  SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LPDDR3
+	  and LPDDR4 options.
+
 config TARGET_MT8512
         bool "MediaTek MT8512 M1 Board"
         select ARM64
@@ -105,6 +114,7 @@ config SYS_BOARD
 	default "mt7981" if TARGET_MT7981
 	default "mt7986" if TARGET_MT7986
 	default "mt8183" if TARGET_MT8183
+	default "mt8195" if TARGET_MT8195
 	default "mt8512" if TARGET_MT8512
 	default "mt8516" if TARGET_MT8516
 	default "mt8518" if TARGET_MT8518
@@ -122,6 +132,7 @@ config SYS_CONFIG_NAME
 	default "mt7981" if TARGET_MT7981
 	default "mt7986" if TARGET_MT7986
 	default "mt8183" if TARGET_MT8183
+	default "mt8195" if TARGET_MT8195
 	default "mt8512" if TARGET_MT8512
 	default "mt8516" if TARGET_MT8516
 	default "mt8518" if TARGET_MT8518
@@ -134,7 +145,7 @@ config SYS_CONFIG_NAME
 config MTK_BROM_HEADER_INFO
 	string
 	default "media=nor" if TARGET_MT8518 || TARGET_MT8512 || TARGET_MT7629 || TARGET_MT7622
-	default "media=emmc" if TARGET_MT8516 || TARGET_MT8365 || TARGET_MT8183
+	default "media=emmc" if TARGET_MT8516 || TARGET_MT8365 || TARGET_MT8183 || TARGET_MT8195
 	default "media=snand;nandinfo=2k+64" if TARGET_MT7981 || TARGET_MT7986
 	default "lk=1" if TARGET_MT7623
 
arch/arm/mach-mediatek/Makefile +1 -0
index fc85293f71..fbbb5431d1 100644
@@ -10,5 +10,6 @@ obj-$(CONFIG_TARGET_MT7629) += mt7629/
 obj-$(CONFIG_TARGET_MT7981) += mt7981/
 obj-$(CONFIG_TARGET_MT7986) += mt7986/
 obj-$(CONFIG_TARGET_MT8183) += mt8183/
+obj-$(CONFIG_TARGET_MT8195) += mt8195/
 obj-$(CONFIG_TARGET_MT8516) += mt8516/
 obj-$(CONFIG_TARGET_MT8518) += mt8518/
arch/arm/mach-mediatek/mt8195/Kconfig new file +13 -0
new file mode 100644
index 0000000000..a34fa2cf2e
@@ -0,0 +1,13 @@
+if TARGET_MT8195
+
+config SYS_BOARD
+	default "mt8195"
+
+config SYS_CONFIG_NAME
+	default "mt8195"
+
+config MTK_BROM_HEADER_INFO
+	string
+	default "media=emmc"
+
+endif
arch/arm/mach-mediatek/mt8195/Makefile new file +3 -0
new file mode 100644
index 0000000000..886ab7e4eb
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier:	GPL-2.0
+
+obj-y += init.o
arch/arm/mach-mediatek/mt8195/init.c new file +97 -0

97 lines not on this page · raw message

Signature · 1 line
2.18.0
#1 lore raw

PATCH v5 2/2 board: mediatek: add mt8195 demo board

From: Fabien Parent <[email protected]>

Add mt8195-demo board support.
This demo purpose board uses MediaTek's MT8195 SoC.

---
 MAINTAINERS                         |   1 +
 arch/arm/dts/Makefile               |   1 +
 arch/arm/dts/mt8195-demo.dts        | 122 ++++++++++++++++++++++++++++
 board/mediatek/mt8195/MAINTAINERS   |   6 ++
 board/mediatek/mt8195/Makefile      |   3 +
 board/mediatek/mt8195/README        |  65 +++++++++++++++
 board/mediatek/mt8195/mt8195_demo.c |  38 +++++++++
 configs/mt8195_demo_defconfig       |  99 ++++++++++++++++++++++
 include/configs/mt8195.h            |  46 +++++++++++
 9 files changed, 381 insertions(+)
 create mode 100644 arch/arm/dts/mt8195-demo.dts
 create mode 100644 board/mediatek/mt8195/MAINTAINERS
 create mode 100644 board/mediatek/mt8195/Makefile
 create mode 100644 board/mediatek/mt8195/README
 create mode 100644 board/mediatek/mt8195/mt8195_demo.c
 create mode 100644 configs/mt8195_demo_defconfig
 create mode 100644 include/configs/mt8195.h

Changes for v2 and v3:
- no change.

Changes for v4:
- Remove CONFIG_SYS_NS16550 related settings in mt8195.h.

Changes for v5:
- Fix Copyright year to 2023.
- Fix build error by adding 'CONFIG_TEXT_BASE' in defconfig.
- Add README for mt8195-demo board includes toolchain setting 'CROSS_COMPILE=aarch64-linux-gnu-'
- Fix 'CONFIG_EXTRA_ENV_SETTINGS' with 'CFG_EXTRA_ENV_SETTINGS' according to checkpatch error.
- Update dram to 8GB size.
- dts
- Add optee and pcsi support in firmware section.
- mt8195_demo_defconfig
- enable I2C, DFU, GPT, MBR support
- enable some USB ethernet adaptors
- rebase patchset to v2023-10.rc1

MAINTAINERS +1 -0
index 4d0f017e7e..454d3615f4 100644
@@ -396,6 +396,7 @@ F:	drivers/watchdog/mtk_wdt.c
 F:	drivers/net/mtk_eth.c
 F:	drivers/net/mtk_eth.h
 F:	drivers/reset/reset-mediatek.c
+F:	include/configs/mt8195.h
 F:	tools/mtk_image.c
 F:	tools/mtk_image.h
 F:	tools/mtk_nand_headers.c
arch/arm/dts/Makefile +1 -0
index e66c32e268..d7104b77bf 100644
@@ -1342,6 +1342,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt7986a-emmc-rfb.dtb \
 	mt7986b-emmc-rfb.dtb \
 	mt8183-pumpkin.dtb \
+	mt8195-demo.dtb \
 	mt8512-bm1-emmc.dtb \
 	mt8516-pumpkin.dtb \
 	mt8518-ap1-emmc.dtb
arch/arm/dts/mt8195-demo.dts new file +122 -0

122 lines not on this page · raw message

board/mediatek/mt8195/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000000..01fa25115d
@@ -0,0 +1,6 @@
+MT8195 Demo
+M:	Macpaul Lin <[email protected]>
+S:	Maintained
+F:	board/mediatek/mt8195
+F:	include/configs/mt8195.h
+F:	configs/mt8195_demo_defconfig
board/mediatek/mt8195/Makefile new file +3 -0
new file mode 100644
index 0000000000..7e94a87aea
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier:	GPL-2.0
+
+obj-y += mt8195_demo.o
board/mediatek/mt8195/README new file +65 -0

65 lines not on this page · raw message

board/mediatek/mt8195/mt8195_demo.c new file +38 -0
new file mode 100644
index 0000000000..27e16ad2fe
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 BayLibre SAS
+ * Author: Fabien Parent <[email protected]>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <net.h>
+#include <asm/io.h>
+
+int board_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	if (CONFIG_IS_ENABLED(USB_GADGET)) {
+		ret = uclass_get_device(UCLASS_USB_GADGET_GENERIC, 0, &dev);
+		if (ret) {
+			pr_err("%s: Cannot find USB device\n", __func__);
+			return ret;
+		}
+	}
+
+	if (CONFIG_IS_ENABLED(USB_ETHER))
+		usb_ether_init();
+
+	printf("Disabling WDT\n");
+	writel(0, 0x10007000);
+
+	printf("Enabling SCP SRAM\n");
+	for (unsigned int val = 0xFFFFFFFF; val != 0U;) {
+		val = val >> 1;
+		writel(val, 0x1072102C);
+	}
+
+	return 0;
+}
configs/mt8195_demo_defconfig new file +99 -0

99 lines not on this page · raw message

include/configs/mt8195.h new file +46 -0

46 lines not on this page · raw message

Signature · 1 line
2.18.0
#2 lore raw

Re: [PATCH v5 2/2] board: mediatek: add mt8195 demo board

Quoted 8 lines · Macpaul Lin

From: Fabien Parent <[email protected]>

Add mt8195-demo board support.
This demo purpose board uses MediaTek's MT8195 SoC.

[snip]

board/mediatek/mt8195/MAINTAINERS line 6

Quoted 12 lines
board/mediatek/mt8195/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000000..01fa25115d
@@ -0,0 +1,6 @@
+MT8195 Demo
+M:	Macpaul Lin <[email protected]>
+S:	Maintained
+F:	board/mediatek/mt8195
+F:	include/configs/mt8195.h
+F:	configs/mt8195_demo_defconfig

Please list the dts files here too, and these are being synced with Linux, yes?

[snip]

Quoted 10 lines
include/configs/mt8195.h new file +4 -0
new file mode 100644
index 0000000000..7af06da6ea
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration for MT8195 based boards
+ *

include/configs/mt8195.h line 14

Quoted 10 lines
include/configs/mt8195.h new file +10 -0
+ * Copyright (C) 2023 MediaTek Inc.
+ * Copyright (C) 2023 BayLibre, SAS
+ * Author: Macpaul Lin <[email protected]>
+ * Author: Fabien Parent <[email protected]>
+ */
+
+#ifndef __MT8195_H
+#define __MT8195_H
+
+#include <linux/sizes.h>

Drop this, especially as there was just some time spent fixing "need <linux/size.h> in a generic header" mediatek code.

Quoted 19 lines
include/configs/mt8195.h new file +19 -0
+/* Environment settings */
+#include <config_distro_bootcmd.h>
+
+#if IS_ENABLED(CONFIG_CMD_MMC)
+#define BOOT_TARGET_MMC(func) func(MMC, mmc, 0)
+#else
+#define BOOT_TARGET_MMC(func)
+#endif
+
+#if IS_ENABLED(CONFIG_CMD_USB)
+#define BOOT_TARGET_USB(func) func(USB, usb, 0)
+#else
+#define BOOT_TARGET_USB(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+	BOOT_TARGET_MMC(func) \
+	BOOT_TARGET_USB(func)
+

include/configs/mt8195.h line 44

Quoted 10 lines
include/configs/mt8195.h new file +10 -0
+#if !defined(CFG_EXTRA_ENV_SETTINGS)
+#define CFG_EXTRA_ENV_SETTINGS \
+	"scriptaddr=0x40000000\0" \
+	"fdt_addr_r=0x44000000\0" \
+	"fdtoverlay_addr_r=0x44c00000\0" \
+	"kernel_addr_r=0x45000000\0" \
+	"ramdisk_addr_r=0x46000000\0" \
+	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+	BOOTENV
+#endif

Please look at moving to plain text environment, thanks.

Signature · 1 line
Tom
#3 lore raw

Re: [PATCH v5 2/2] board: mediatek: add mt8195 demo board

In reply to Macpaul Lin

Hi,

board/mediatek/mt8195/mt8195_demo.c line 29

Quoted 2 lines
board/mediatek/mt8195/mt8195_demo.c new file +2 -0
+	printf("Disabling WDT\n");
+	writel(0, 0x10007000);

Please don't use magic numbers. Also, I guess this should be a real watchdog driver and u-boot will take care of disabling it if the user wants to.

board/mediatek/mt8195/mt8195_demo.c line 34

Quoted 5 lines
board/mediatek/mt8195/mt8195_demo.c new file +5 -0
+
+	printf("Enabling SCP SRAM\n");
+	for (unsigned int val = 0xFFFFFFFF; val != 0U;) {
+		val = val >> 1;
+		writel(val, 0x1072102C);

Even more magic numbers.

Review

Quoted 1 line
(quoted diff) +1 -0
+	}

Thanks,
-michael

#4 lore raw

Re: [PATCH v5 2/2] board: mediatek: add mt8195 demo board

In reply to Macpaul Lin

Hi Fabien and Macpaul

Thanks for your patch set.

Quoted 8 lines · Macpaul Lin

From: Fabien Parent <[email protected]>

Add mt8195-demo board support.
This demo purpose board uses MediaTek's MT8195 SoC.

Quoted 7 lines

---
 MAINTAINERS                         |   1 + arch/arm/dts/Makefile               |   1 + arch/arm/dts/mt8195-demo.dts        | 122 ++++++++++++++++++++++++++++ board/mediatek/mt8195/MAINTAINERS   |   6 ++ board/mediatek/mt8195/Makefile      |   3 + board/mediatek/mt8195/README        |  65 +++++++++++++++

Rather than such scattered README files nowadays it is preferred adding such documentation at doc/board/mediatek.

Quoted 470 lines

 board/mediatek/mt8195/mt8195_demo.c |  38 +++++++++ configs/mt8195_demo_defconfig       |  99 ++++++++++++++++++++++ include/configs/mt8195.h            |  46 +++++++++++

 9 files changed, 381 insertions(+)

 create mode 100644 arch/arm/dts/mt8195-demo.dts create mode 100644 board/mediatek/mt8195/MAINTAINERS create mode 100644 board/mediatek/mt8195/Makefile create mode 100644 board/mediatek/mt8195/README create mode 100644 board/mediatek/mt8195/mt8195_demo.c create mode 100644 configs/mt8195_demo_defconfig create mode 100644 include/configs/mt8195.h

Changes for v2 and v3:
 - no change.

Changes for v4:
 - Remove CONFIG_SYS_NS16550 related settings in mt8195.h.

Changes for v5:
 - Fix Copyright year to 2023.
 - Fix build error by adding 'CONFIG_TEXT_BASE' in defconfig.
 - Add README for mt8195-demo board includes toolchain setting 'CROSS_COMPILE=aarch64-linux-gnu-'
 - Fix 'CONFIG_EXTRA_ENV_SETTINGS' with 'CFG_EXTRA_ENV_SETTINGS' according to checkpatch error.
 - Update dram to 8GB size.
 - dts
  - Add optee and pcsi support in firmware section.
 - mt8195_demo_defconfig
  - enable I2C, DFU, GPT, MBR support
  - enable some USB ethernet adaptors
 - rebase patchset to v2023-10.rc1

MAINTAINERS +0 -0
index 4d0f017e7e..454d3615f4 100644
@@ -396,6 +396,7 @@ F:	drivers/watchdog/mtk_wdt.c

 F: drivers/net/mtk_eth.c
 F: drivers/net/mtk_eth.h
 F: drivers/reset/reset-mediatek.c
+F: include/configs/mt8195.h
 F: tools/mtk_image.c
 F: tools/mtk_image.h
 F: tools/mtk_nand_headers.c

arch/arm/dts/Makefile +1 -0
index e66c32e268..d7104b77bf 100644
@@ -1342,6 +1342,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
  	mt7986a-emmc-rfb.dtb \
  	mt7986b-emmc-rfb.dtb \
  	mt8183-pumpkin.dtb \
+	mt8195-demo.dtb \
  	mt8512-bm1-emmc.dtb \
  	mt8516-pumpkin.dtb \

  mt8518-ap1-emmc.dtb

arch/arm/dts/mt8195-demo.dts new file +122 -0
new file mode 100644
index 0000000000..e4063cd143
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Copyright (C) 2023 BayLibre SAS.
+ * Author: Macpaul Lin <[email protected]>
+ * Author: Fabien Parent <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <config.h>
+#include "mt8195.dtsi"
+
+/ {
+	model = "MediaTek MT8195 demo board";
+	compatible = "mediatek,mt8195-demo", "mediatek,mt8195";
+
+	memory@40000000 {
+		/* 8GB */
+		device_type = "memory";
+		reg = <0 0x40000000 2 0x00000000>;
+	};
+
+	firmware: firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@54600000 {
+			no-map;
+			reg = <0 0x54600000 0x0 0x200000>;
+		};
+
+		/* 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	cap-mmc-hw-reset;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+};
+
+&ssusb {
+	mediatek,force-vbus;
+	maximum-speed = "high-speed";
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci3 {
+	status = "okay";
+};
board/mediatek/mt8195/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000000..01fa25115d
@@ -0,0 +1,6 @@
+MT8195 Demo
+M:	Macpaul Lin <[email protected]>
+S:	Maintained
+F:	board/mediatek/mt8195
+F:	include/configs/mt8195.h
+F:	configs/mt8195_demo_defconfig
board/mediatek/mt8195/Makefile new file +3 -0
new file mode 100644
index 0000000000..7e94a87aea
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier:	GPL-2.0
+
+obj-y += mt8195_demo.o
board/mediatek/mt8195/README new file +64 -0
new file mode 100644
index 0000000000..27ac56e077
@@ -0,0 +1,65 @@
+Introduction
+============
+
+The Genio 1200-Demo (mt8195-demo) board is featuring the MediaTek
+MT8195/MT8395 Family SoC.
+
+Genio 1200-Demo board features:
+	* CPU: ARMv8 64bit Big-Little architecture,
+		* Big: quad-core Cortex-A73
+		* Little: quad-core Cortex-A53
+	* DRAM: 2x 4GB dual-channel
+	* eMMC: onboard eMMC
+	* SD/MMC
+	* GbE (onboard RTL8211F) Gigabit ethernet PHY
+	* PCIE: 2-lane M.2 E-Key
+	* USB:
+		* USB3.0 dual role port
+		* 1x USB3.0 host, 2x USB2.0 host
+	* Display: HDMI/eDP/MIPI
+	* Camera: 3x 4-lane CSI
+	* APU
+
+Here is the step-by-step to boot to U-Boot on Genio 1200-Demo (mt8195-demo)
+board.
+
+Get the Source from Genio IOT Yocto
+===================================
+
+To download the Genio IOT Yocto source code, please follow the instructions
+in [1]. With the full source code, developers can easily build the boot chain,
+which includes components such as TF-A, u-boot, kernel, and the complete
+Genio IOT Yocto image.
+
+Compile the U-Boot
+==================
+
+Linux native build with latest U-Boot.
+
+  > cd u-boot
+  > make CROSS_COMPILE=aarch64-linux-gnu- mt8195_demo_defconfig all
+
+Genio IOT Yocto build with latest U-boot or Genio IOT Yocto's U-boot.
+
+  > DISTRO=rity-demo MACHINE=i1200-demo bitbake u-boot
+
+Genio IOT Yocto build TF-A and package U-boot into bl31 together.
+
+  > DISTRO=rity-demo MACHINE=i1200-demo bitbake trusted-firmware-a
+
+Flash the image
+===============
+
+MediaTek currently support the use of the Genio IOT Yocto toolset with the
+'genio-flash' USB download tool for flashing images. To install 'genio-flash',
+use Python's 'pip' package manager. Then, follow the instructions provided
+in [2] to flash u-boot with the IOT Yocto image.
+
+   > pip install genio-flash
+
+cd into the folder contains Genio IOT Yocto image, then run 'genio-flash'.
+
+   > genio-flash
+
+[1]

https://mediatek.gitlab.io/aiot/doc/aiot-dev-guide/release/v22.2/sw/yocto/get-started/build-code.html#genio-1200-demo-board
+[2]
https://mediatek.gitlab.io/aiot/doc/aiot-dev-guide/master/sw/yocto/get-started/flash/flash-i1200-demo.html

board/mediatek/mt8195/mt8195_demo.c new file +38 -0
new file mode 100644
index 0000000000..27e16ad2fe
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 BayLibre SAS
+ * Author: Fabien Parent <[email protected]>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <net.h>
+#include <asm/io.h>
+
+int board_init(void)
+{
+	struct udevice *dev;
+	int ret;
+
+	if (CONFIG_IS_ENABLED(USB_GADGET)) {
+		ret = uclass_get_device(UCLASS_USB_GADGET_GENERIC, 0, &dev);
+		if (ret) {
+			pr_err("%s: Cannot find USB device\n", __func__);
+			return ret;
+		}
+	}
+
+	if (CONFIG_IS_ENABLED(USB_ETHER))
+		usb_ether_init();
+
+	printf("Disabling WDT\n");
+	writel(0, 0x10007000);
+
+	printf("Enabling SCP SRAM\n");
+	for (unsigned int val = 0xFFFFFFFF; val != 0U;) {
+		val = val >> 1;
+		writel(val, 0x1072102C);
+	}
+
+	return 0;
+}
configs/mt8195_demo_defconfig new file +99 -0
new file mode 100644
index 0000000000..7e6c02a742
@@ -0,0 +1,99 @@
+CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=13000000
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_TEXT_BASE=0x4c000000
+CONFIG_SYS_MALLOC_LEN=0x500000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x1000
+CONFIG_ENV_OFFSET=0x0
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="mt8195-demo"
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_TARGET_MT8195=y
+CONFIG_DEBUG_UART_BASE=0x11001100
+CONFIG_DEBUG_UART_CLOCK=26000000
+CONFIG_ARMV8_CRYPTO=y
+CONFIG_SYS_LOAD_ADDR=0x4c000000
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_DEFAULT_FDT_FILE="mt8195-demo"
+# CONFIG_DISPLAY_BOARDINFO is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_BOOTD is not set
+CONFIG_CMD_BOOTEFI_SELFTEST=y
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CMD_NVEDIT_INFO=y
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_GPT_RENAME=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MBR=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_BLOCK_CACHE is not set
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_MMC_ENV_PART=2
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_ENV_IMPORT_FDT=y
+CONFIG_DEVRES=y
+CONFIG_CLK=y
+CONFIG_DFU_MMC=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
+CONFIG_SYS_DFU_MAX_FILE_SIZE=0x200000
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x4d000000
+CONFIG_FASTBOOT_BUF_SIZE=0x8000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MTK=y
+# CONFIG_INPUT is not set
+# CONFIG_MMC_QUIRKS is not set
+CONFIG_MMC_MTK=y
+CONFIG_PHY=y
+CONFIG_PHY_MTK_TPHY=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_EMULATION=y
+CONFIG_BAUDRATE=921600
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_MTK_SERIAL=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_MTK=y
+CONFIG_USB_MTU3=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x0e8d
+CONFIG_USB_GADGET_PRODUCT_NUM=0x201c
+CONFIG_USB_ETHER=y
+CONFIG_WDT=y
+CONFIG_EFI_SET_TIME=y
include/configs/mt8195.h new file +36 -0
new file mode 100644
index 0000000000..7af06da6ea
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration for MT8195 based boards
+ *
+ * Copyright (C) 2023 MediaTek Inc.
+ * Copyright (C) 2023 BayLibre, SAS
+ * Author: Macpaul Lin <[email protected]>
+ * Author: Fabien Parent <[email protected]>
+ */
+
+#ifndef __MT8195_H
+#define __MT8195_H
+
+#include <linux/sizes.h>
+
+/* Environment settings */
+#include <config_distro_bootcmd.h>
+
+#if IS_ENABLED(CONFIG_CMD_MMC)
+#define BOOT_TARGET_MMC(func) func(MMC, mmc, 0)
+#else
+#define BOOT_TARGET_MMC(func)
+#endif
+
+#if IS_ENABLED(CONFIG_CMD_USB)
+#define BOOT_TARGET_USB(func) func(USB, usb, 0)
+#else
+#define BOOT_TARGET_USB(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+	BOOT_TARGET_MMC(func) \
+	BOOT_TARGET_USB(func)
+
+#if !defined(CFG_EXTRA_ENV_SETTINGS)
+#define CFG_EXTRA_ENV_SETTINGS \

include/configs/mt8195.h line 46

Quoted 10 lines
include/configs/mt8195.h new file +10 -0
+	"scriptaddr=0x40000000\0" \
+	"fdt_addr_r=0x44000000\0" \
+	"fdtoverlay_addr_r=0x44c00000\0" \
+	"kernel_addr_r=0x45000000\0" \
+	"ramdisk_addr_r=0x46000000\0" \
+	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+	BOOTENV
+#endif
+
+#endif

Cheers

Marcel

#5 lore raw
In reply to Macpaul Lin

Hi guys

Quoted 35 lines · Macpaul Lin

From: Fabien Parent <[email protected]>

The MediaTek MT8195 is a ARM64-based SoC with a quad-core Cortex-A73 and a quad-core Cortex-A53. It is including UART, SPI, USB3.0 device and hosts, SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LPDDR3 and LPDDR4 options.

---
 MAINTAINERS                            |   2 + arch/arm/dts/mt8195.dtsi               | 370 +++++++++++++++++++++++++ arch/arm/mach-mediatek/Kconfig         |  13 +- arch/arm/mach-mediatek/Makefile        |   1 + arch/arm/mach-mediatek/mt8195/Kconfig  |  13 + arch/arm/mach-mediatek/mt8195/Makefile |   3 + arch/arm/mach-mediatek/mt8195/init.c   |  97 +++++++

 7 files changed, 498 insertions(+), 1 deletion(-)

 create mode 100644 arch/arm/dts/mt8195.dtsi create mode 100644 arch/arm/mach-mediatek/mt8195/Kconfig create mode 100644 arch/arm/mach-mediatek/mt8195/Makefile create mode 100644 arch/arm/mach-mediatek/mt8195/init.c

Changes for v2:
 - Correct node name to t-phy for u3phy0.
 - Add platform compatible string "mediatek,mt8195-tphy" to all usb phy nodes.
 - remove clock nodes that software cannot controlled in phy nodes.
 - Test and add back "mac" for HOST only xhci nodes.

Changes for v3:
 - Revise device node name from "xhciX: xhciX@" to "xhciX: xhci@".

Changes for v4:
 - No change.

Quoted 7 lines

Changes for v5:
 - Fix Copyright year to 2023.
 - Fix memory map in dram_init() to support 8GB onboard memory.
 - Add '#if !IS_ENABLED(CONFIG_SYSRESET)' with reset_cpu().
 - Correct reset_cpu() function prototype.
 - rebase patchset to v2023-10.rc1
 - Add missing arch/arm/mach-mediatek/mt8195/Kconfig.

[snip]

I finally got my hands on an EVK and gave this a try. However, I did not get that far. This is with latest downstream TF-A as I still struggle with upstream there as well. Any ideas?

U-Boot 2024.01-rc1-00056-g5237f2b48bb (Nov 10 2023 - 15:33:34 +0100)

CPU:   MediaTek MT8195
DRAM:  8 GiB

mtu3 usb@11200000: clks of sts1 are not stable! mtu3-peripheral ssusb@11200000: device enable failed -110 mtu3-peripheral ssusb@11200000: mtu3 hw init failed:-110
board_init: Cannot find USB device
initcall failed at call 00000000ffe46a50 (err=-110) ### ERROR ### Please RESET the board ###

Cheers

Marcel

#6 lore raw

Marcel Ziswiler <[email protected]> 於 2023年11月11日 週六 上午4:24寫道:

Quoted 1 line

[snip]

Quoted 24 lines
Quoted 7 lines

Changes for v5:
- Fix Copyright year to 2023.
- Fix memory map in dram_init() to support 8GB onboard memory.
- Add '#if !IS_ENABLED(CONFIG_SYSRESET)' with reset_cpu().
- Correct reset_cpu() function prototype.
- rebase patchset to v2023-10.rc1
- Add missing arch/arm/mach-mediatek/mt8195/Kconfig.

[snip]

I finally got my hands on an EVK and gave this a try. However, I did not get that far. This is with latest downstream TF-A as I still struggle with upstream there as well. Any ideas?

U-Boot 2024.01-rc1-00056-g5237f2b48bb (Nov 10 2023 - 15:33:34 +0100)

CPU:   MediaTek MT8195
DRAM:  8 GiB

mtu3 usb@11200000: clks of sts1 are not stable! mtu3-peripheral ssusb@11200000: device enable failed -110 mtu3-peripheral ssusb@11200000: mtu3 hw init failed:-110
board_init: Cannot find USB device
initcall failed at call 00000000ffe46a50 (err=-110) ### ERROR ### Please RESET the board ###

Quoted 3 lines

Cheers

Marcel

I'm glad you've get a board and tested our patches. Currently we're busy on other tasks so the improvement to the patch v5 has been postponed. :~(

These error is because the power supplement settings are in the later patches. Hence the clock might not stable for the cold boot up.
You can just press the key on the board and warm reset it, the clock issue should be disappear.

Quoted 2 lines

mtu3-peripheral ssusb@11200000: device enable failed -110 mtu3-peripheral ssusb@11200000: mtu3 hw init failed:-110

You can refer to the user guide and public domain code.
https://mediatek.gitlab.io/aiot/doc/aiot-dev-guide/master/sw/yocto/get-started.html
https://mediatek.gitlab.io/aiot/doc/aiot-dev-guide/master/sw/yocto/get-started/build-code/build-steps.html

The latest u-boot code is here.
https://gitlab.com/mediatek/aiot/bsp/u-boot/-/tree/mtk-v2022.10?ref_type=heads

Signature · 2 lines
Best regards,
Macpaul Lin
Reviewed-by on v5 1/2
#7 lore raw
In reply to Macpaul Lin

Hi,

Quoted 10 lines · Macpaul Lin

From: Fabien Parent <[email protected]>

The MediaTek MT8195 is a ARM64-based SoC with a quad-core Cortex-A73 and a quad-core Cortex-A53. It is including UART, SPI, USB3.0 device and hosts, SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LPDDR3 and LPDDR4 options.

Quoted 13 lines
---
 MAINTAINERS                            |   2 +
 arch/arm/dts/mt8195.dtsi               | 370 +++++++++++++++++++++++++
 arch/arm/mach-mediatek/Kconfig         |  13 +-
 arch/arm/mach-mediatek/Makefile        |   1 +
 arch/arm/mach-mediatek/mt8195/Kconfig  |  13 +
 arch/arm/mach-mediatek/mt8195/Makefile |   3 +
 arch/arm/mach-mediatek/mt8195/init.c   |  97 +++++++
 7 files changed, 498 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/mt8195.dtsi
 create mode 100644 arch/arm/mach-mediatek/mt8195/Kconfig
 create mode 100644 arch/arm/mach-mediatek/mt8195/Makefile
 create mode 100644 arch/arm/mach-mediatek/mt8195/init.c

nits below

Quoted 153 lines

Changes for v2:
- Correct node name to t-phy for u3phy0.
- Add platform compatible string "mediatek,mt8195-tphy" to all usb phy nodes.
- remove clock nodes that software cannot controlled in phy nodes.
- Test and add back "mac" for HOST only xhci nodes.

Changes for v3:
- Revise device node name from "xhciX: xhciX@" to "xhciX: xhci@".

Changes for v4:
- No change.

Changes for v5:
- Fix Copyright year to 2023.
- Fix memory map in dram_init() to support 8GB onboard memory.
- Add '#if !IS_ENABLED(CONFIG_SYSRESET)' with reset_cpu().
- Correct reset_cpu() function prototype.
- rebase patchset to v2023-10.rc1
- Add missing arch/arm/mach-mediatek/mt8195/Kconfig.

MAINTAINERS +2 -0
index 47581cf6fb..4d0f017e7e 100644
@@ -369,8 +369,10 @@ ARM MEDIATEK
 M:     Ryder Lee <[email protected]>
 M:     Weijie Gao <[email protected]>
 M:     Chunfeng Yun <[email protected]>
+M:     Macpaul Lin <[email protected]>
 R:     GSS_MTK_Uboot_upstream <[email protected]>
 S:     Maintained
+F:     arch/arm/dts/mt8195.dtsi
 F:     arch/arm/mach-mediatek/
 F:     arch/arm/include/asm/arch-mediatek/
 F:     board/mediatek/
arch/arm/mach-mediatek/Kconfig +12 -1
index 04aa2fd97f..3a2af1cdee 100644
@@ -67,6 +67,15 @@ config TARGET_MT8183
          SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LPDDR3
          and LPDDR4 options.
 
+config TARGET_MT8195
+       bool "MediaTek MT8195 SoC"
+       select ARM64
+       help
+         The MediaTek MT8195 is a ARM64-based SoC with a quad-core Cortex-A73 and
+         a quad-core Cortex-A53. It is including UART, SPI, USB3.0 device and hosts,
+         SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LPDDR3
+         and LPDDR4 options.
+
 config TARGET_MT8512
         bool "MediaTek MT8512 M1 Board"
         select ARM64
@@ -105,6 +114,7 @@ config SYS_BOARD
        default "mt7981" if TARGET_MT7981
        default "mt7986" if TARGET_MT7986
        default "mt8183" if TARGET_MT8183
+       default "mt8195" if TARGET_MT8195
        default "mt8512" if TARGET_MT8512
        default "mt8516" if TARGET_MT8516
        default "mt8518" if TARGET_MT8518
@@ -122,6 +132,7 @@ config SYS_CONFIG_NAME
        default "mt7981" if TARGET_MT7981
        default "mt7986" if TARGET_MT7986
        default "mt8183" if TARGET_MT8183
+       default "mt8195" if TARGET_MT8195
        default "mt8512" if TARGET_MT8512
        default "mt8516" if TARGET_MT8516
        default "mt8518" if TARGET_MT8518
@@ -134,7 +145,7 @@ config SYS_CONFIG_NAME
 config MTK_BROM_HEADER_INFO
        string
        default "media=nor" if TARGET_MT8518 || TARGET_MT8512 || TARGET_MT7629 || TARGET_MT7622
-       default "media=emmc" if TARGET_MT8516 || TARGET_MT8365 || TARGET_MT8183
+       default "media=emmc" if TARGET_MT8516 || TARGET_MT8365 || TARGET_MT8183 || TARGET_MT8195
        default "media=snand;nandinfo=2k+64" if TARGET_MT7981 || TARGET_MT7986
        default "lk=1" if TARGET_MT7623
 
arch/arm/mach-mediatek/Makefile +1 -0
index fc85293f71..fbbb5431d1 100644
@@ -10,5 +10,6 @@ obj-$(CONFIG_TARGET_MT7629) += mt7629/
 obj-$(CONFIG_TARGET_MT7981) += mt7981/
 obj-$(CONFIG_TARGET_MT7986) += mt7986/
 obj-$(CONFIG_TARGET_MT8183) += mt8183/
+obj-$(CONFIG_TARGET_MT8195) += mt8195/
 obj-$(CONFIG_TARGET_MT8516) += mt8516/
 obj-$(CONFIG_TARGET_MT8518) += mt8518/
arch/arm/mach-mediatek/mt8195/Kconfig new file +13 -0
new file mode 100644
index 0000000000..a34fa2cf2e
@@ -0,0 +1,13 @@
+if TARGET_MT8195
+
+config SYS_BOARD
+       default "mt8195"
+
+config SYS_CONFIG_NAME
+       default "mt8195"
+
+config MTK_BROM_HEADER_INFO
+       string
+       default "media=emmc"
+
+endif
arch/arm/mach-mediatek/mt8195/Makefile new file +3 -0
new file mode 100644
index 0000000000..886ab7e4eb
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier:     GPL-2.0
+
+obj-y += init.o
arch/arm/mach-mediatek/mt8195/init.c new file +25 -0
new file mode 100644
index 0000000000..8d6b700e7e
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Copyright (C) 2023 BayLibre, SAS
+ * Author: Macpaul Lin <[email protected]>
+ * Author: Fabien Parent <[email protected]>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <ram.h>
+#include <asm/arch/misc.h>
+#include <asm/armv8/mmu.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <dm/uclass.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+       int ret;

arch/arm/mach-mediatek/mt8195/init.c line 35

Quoted 10 lines
arch/arm/mach-mediatek/mt8195/init.c new file +10 -0
+
+       ret = fdtdec_setup_memory_banksize();
+       if (ret)
+               return ret;
+
+       fdtdec_setup_mem_size_base();
+
+       /*
+        * Limit gd->ram_top not exceeding SZ_4G.
+        * Because some periphals like mmc requires DMA buffer

spelling

arch/arm/mach-mediatek/mt8195/init.c line 36

Quoted 1 line
arch/arm/mach-mediatek/mt8195/init.c new file +1 -0
+        * allocaed below SZ_4G.

spelling

Also please don't put punctuation after SZ_4G as it makes it harder for people to select it and search

Quoted 29 lines
arch/arm/mach-mediatek/mt8195/init.c new file +29 -0
+        *
+        * Note: SZ_2M is for adjusting gd->relocaddr,
+        *       the reserved memory for u-boot itself.
+        */
+       if (gd->ram_base + gd->ram_size >= SZ_4G)
+               gd->mon_len = SZ_4G + gd->ram_base + SZ_2M;
+
+       return 0;
+}
+
+int dram_init_banksize(void)
+{
+       gd->bd->bi_dram[0].start = gd->ram_base;
+       gd->bd->bi_dram[0].size = gd->ram_size;
+
+       return 0;
+}
+
+int mtk_pll_early_init(void)
+{
+       return 0;
+}
+
+int mtk_soc_early_init(void)
+{
+       return 0;
+}
+
+#if !IS_ENABLED(CONFIG_SYSRESET)

arch/arm/mach-mediatek/mt8195/init.c line 75

Quoted 10 lines
arch/arm/mach-mediatek/mt8195/init.c new file +10 -0
+void reset_cpu(void)
+{
+       psci_system_reset();
+}
+#endif
+
+int print_cpuinfo(void)
+{
+       printf("CPU:   MediaTek MT8195\n");
+       return 0;

You should use a sysinfo driver to provide this information

Quoted 23 lines
arch/arm/mach-mediatek/mt8195/init.c new file +22 -1
+}
+
+static struct mm_region mt8195_mem_map[] = {
+       {
+               /* DDR */
+               .virt = 0x40000000UL,
+               .phys = 0x40000000UL,
+               .size = 0x200000000UL,
+               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
+       }, {
+               .virt = 0x00000000UL,
+               .phys = 0x00000000UL,
+               .size = 0x20000000UL,
+               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+                        PTE_BLOCK_NON_SHARE |
+                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
+       }, {
+               0,
+       }
+};
+
+struct mm_region *mem_map = mt8195_mem_map;
--
Quoted 2 lines

2.18.0

Regards,
Simon

#8 lore raw
In reply to Macpaul Lin

Hello,

What happened to this series? Has it been abandoned? Also, is it possible to get memory size installed to the board dynamically?

Best regards,
Shengyu

Quoted 622 lines · Macpaul Lin

From: Fabien Parent <[email protected]>

The MediaTek MT8195 is a ARM64-based SoC with a quad-core Cortex-A73 and a quad-core Cortex-A53. It is including UART, SPI, USB3.0 device and hosts, SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LPDDR3 and LPDDR4 options.

---
  MAINTAINERS                            |   2 +
  arch/arm/dts/mt8195.dtsi               | 370 +++++++++++++++++++++++++
  arch/arm/mach-mediatek/Kconfig         |  13 +-
  arch/arm/mach-mediatek/Makefile        |   1 +
  arch/arm/mach-mediatek/mt8195/Kconfig  |  13 +
  arch/arm/mach-mediatek/mt8195/Makefile |   3 +
  arch/arm/mach-mediatek/mt8195/init.c   |  97 +++++++
  7 files changed, 498 insertions(+), 1 deletion(-)

create mode 100644 arch/arm/dts/mt8195.dtsi create mode 100644 arch/arm/mach-mediatek/mt8195/Kconfig create mode 100644 arch/arm/mach-mediatek/mt8195/Makefile create mode 100644 arch/arm/mach-mediatek/mt8195/init.c

Changes for v2:
- Correct node name to t-phy for u3phy0.
- Add platform compatible string "mediatek,mt8195-tphy" to all usb phy nodes.
- remove clock nodes that software cannot controlled in phy nodes.
- Test and add back "mac" for HOST only xhci nodes.

Changes for v3:
- Revise device node name from "xhciX: xhciX@" to "xhciX: xhci@".

Changes for v4:
- No change.

Changes for v5:
- Fix Copyright year to 2023.
- Fix memory map in dram_init() to support 8GB onboard memory.
- Add '#if !IS_ENABLED(CONFIG_SYSRESET)' with reset_cpu().
- Correct reset_cpu() function prototype.
- rebase patchset to v2023-10.rc1
- Add missing arch/arm/mach-mediatek/mt8195/Kconfig.

MAINTAINERS +2 -0
index 47581cf6fb..4d0f017e7e 100644
@@ -369,8 +369,10 @@ ARM MEDIATEK
  M:	Ryder Lee <[email protected]>
  M:	Weijie Gao <[email protected]>
  M:	Chunfeng Yun <[email protected]>
+M:	Macpaul Lin <[email protected]>
  R:	GSS_MTK_Uboot_upstream <[email protected]>
  S:	Maintained
+F:	arch/arm/dts/mt8195.dtsi
  F:	arch/arm/mach-mediatek/
  F:	arch/arm/include/asm/arch-mediatek/
  F:	board/mediatek/
arch/arm/dts/mt8195.dtsi new file +370 -0
new file mode 100644
index 0000000000..14cb28d008
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Copyright (C) 2023 BayLibre, SAS
+ * Author: Ben Ho <[email protected]>
+ *         Erin Lo <[email protected]>
+ *         Fabien Parent <[email protected]>
+ *         Macpaul Lin <[email protected]>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	compatible = "mediatek,mt8195";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x002>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x003>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <741>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+		};
+	};
+
+	clk26m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	mmc_source_clk: mmc-source-clk{
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <400000000>;
+		clock-output-names = "mmc_source_clk";
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8195-wdt",
+				      "mediatek,wdt";
+			reg = <0 0x10007000 0 0x100>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,  /* GICD */
+			      <0 0x0c100000 0 0x200000>, /* GICR */
+			      <0 0x0c400000 0 0x2000>,   /* GICC */
+			      <0 0x0c410000 0 0x1000>,   /* GICH */
+			      <0 0x0c420000 0 0x2000>;   /* GICV */
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
+				};
+			};
+		};
+
+		sysirq: interrupt-controller@c530a80 {
+			compatible = "mediatek,mt8195-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x0c530a80 0 0x50>;
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8195-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt8195-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8195-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial@11001100 {
+			compatible = "mediatek,mt8195-uart",
+				     "mediatek,hsuart";
+			reg = <0 0x11001100 0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+			clock-frequency = <26000000>;
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "baud", "bus";
+			status = "disabled";
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8195-mmc",
+				     "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11f50000 0 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&mmc_source_clk>,
+				 <&clk26m>,
+				 <&clk26m>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		u3phy0: t-phy@11f40000 {
+			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e40000 0xe00>;
+			status = "okay";
+
+			u2port0: usb-phy@0 {
+				reg = <0 0x700>;
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy@700 {
+				reg = <0x700 0x700>;
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		usb: usb@11200000 {
+			compatible ="mediatek,mt8195-mtu3", "mediatek,mtu3";
+			reg = <0 0x11203e00 0 0x0100>;
+			reg-names = "ippc";
+			phys = <&u2port0 PHY_TYPE_USB2>;
+			clocks = <&clk26m>,
+				 <&clk26m>,
+				 <&clk26m>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			ssusb: ssusb@11200000 {
+				compatible = "mediatek,ssusb";
+				reg = <0 0x11200000 0 0x3e00>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>;
+				status = "disabled";
+			};
+
+			xhci0: xhci@11200000 {
+				compatible = "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&clk26m>,
+					 <&clk26m>,
+					 <&clk26m>,
+					 <&clk26m>;
+				clock-names = "sys_ck", "xhci_ck", "ref_ck", "mcu_ck";
+				status = "disabled";
+			};
+		};
+
+		u3phy1: t-phy@11e30000 {
+			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11e30000 0xe00>;
+			status = "disabled";
+
+			u2port1: usb-phy@0 {
+				reg = <0x0 0x700>;
+				#phy-cells = <1>;
+			};
+
+			u3port1: usb-phy@700 {
+				reg = <0x700 0x700>;
+				#phy-cells = <1>;
+			};
+		};
+
+		xhci1: xhci@11290000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x11290000 0 0x1000>,
+			      <0 0x11293e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&u2port1 PHY_TYPE_USB2>;
+			clocks = <&clk26m>,
+				 <&clk26m>,
+				 <&clk26m>,
+				 <&clk26m>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck", "mcu_ck";
+			status = "disabled";
+		};
+
+		u3phy2: t-phy@11c40000 {
+			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11c40000 0x700>;
+			status = "disabled";
+
+			u2port2: usb-phy@0 {
+				reg = <0x0 0x700>;
+				#phy-cells = <1>;
+			};
+		};
+
+		xhci2: xhci@112a0000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112a0000 0 0x1000>,
+			      <0 0x112a3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&u2port2 PHY_TYPE_USB2>;
+			clocks = <&clk26m>,
+				 <&clk26m>,
+				 <&clk26m>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			status = "disabled";
+		};
+
+		u3phy3: t-phy@11c50000 {
+			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11c50000 0x700>;
+			status = "okay";
+
+			u2port3: usb-phy@0 {
+				reg = <0x0 0x700>;
+				#phy-cells = <1>;
+			};
+		};
+
+		xhci3: xhci@112b0000 {
+			compatible = "mediatek,mt8195-xhci",
+				     "mediatek,mtk-xhci";
+			reg = <0 0x112b0000 0 0x1000>,
+			      <0 0x112b3e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&u2port3 PHY_TYPE_USB2>;
+			clocks = <&clk26m>,
+				 <&clk26m>,
+				 <&clk26m>;
+			clock-names = "sys_ck", "xhci_ck", "ref_ck";
+			usb2-lpm-disable;
+			status = "disabled";
+		};
+	};
+};
arch/arm/mach-mediatek/Kconfig +12 -1
index 04aa2fd97f..3a2af1cdee 100644
@@ -67,6 +67,15 @@ config TARGET_MT8183
  	  SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LPDDR3
  	  and LPDDR4 options.
 
+config TARGET_MT8195
+	bool "MediaTek MT8195 SoC"
+	select ARM64
+	help
+	  The MediaTek MT8195 is a ARM64-based SoC with a quad-core Cortex-A73 and
+	  a quad-core Cortex-A53. It is including UART, SPI, USB3.0 device and hosts,
+	  SD and MMC cards, UFS, PWM, I2C, I2S, S/PDIF, and several LPDDR3
+	  and LPDDR4 options.
+
  config TARGET_MT8512
          bool "MediaTek MT8512 M1 Board"
          select ARM64
@@ -105,6 +114,7 @@ config SYS_BOARD
  	default "mt7981" if TARGET_MT7981
  	default "mt7986" if TARGET_MT7986
  	default "mt8183" if TARGET_MT8183
+	default "mt8195" if TARGET_MT8195
  	default "mt8512" if TARGET_MT8512
  	default "mt8516" if TARGET_MT8516
  	default "mt8518" if TARGET_MT8518
@@ -122,6 +132,7 @@ config SYS_CONFIG_NAME
  	default "mt7981" if TARGET_MT7981
  	default "mt7986" if TARGET_MT7986
  	default "mt8183" if TARGET_MT8183
+	default "mt8195" if TARGET_MT8195
  	default "mt8512" if TARGET_MT8512
  	default "mt8516" if TARGET_MT8516
  	default "mt8518" if TARGET_MT8518
@@ -134,7 +145,7 @@ config SYS_CONFIG_NAME
  config MTK_BROM_HEADER_INFO
  	string
  	default "media=nor" if TARGET_MT8518 || TARGET_MT8512 || TARGET_MT7629 || TARGET_MT7622
-	default "media=emmc" if TARGET_MT8516 || TARGET_MT8365 || TARGET_MT8183
+	default "media=emmc" if TARGET_MT8516 || TARGET_MT8365 || TARGET_MT8183 || TARGET_MT8195
  	default "media=snand;nandinfo=2k+64" if TARGET_MT7981 || TARGET_MT7986
  	default "lk=1" if TARGET_MT7623
 
arch/arm/mach-mediatek/Makefile +1 -0
index fc85293f71..fbbb5431d1 100644
@@ -10,5 +10,6 @@ obj-$(CONFIG_TARGET_MT7629) += mt7629/
  obj-$(CONFIG_TARGET_MT7981) += mt7981/
  obj-$(CONFIG_TARGET_MT7986) += mt7986/
  obj-$(CONFIG_TARGET_MT8183) += mt8183/
+obj-$(CONFIG_TARGET_MT8195) += mt8195/
  obj-$(CONFIG_TARGET_MT8516) += mt8516/
  obj-$(CONFIG_TARGET_MT8518) += mt8518/
arch/arm/mach-mediatek/mt8195/Kconfig new file +13 -0
new file mode 100644
index 0000000000..a34fa2cf2e
@@ -0,0 +1,13 @@
+if TARGET_MT8195
+
+config SYS_BOARD
+	default "mt8195"
+
+config SYS_CONFIG_NAME
+	default "mt8195"
+
+config MTK_BROM_HEADER_INFO
+	string
+	default "media=emmc"
+
+endif
arch/arm/mach-mediatek/mt8195/Makefile new file +3 -0
new file mode 100644
index 0000000000..886ab7e4eb
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier:	GPL-2.0
+
+obj-y += init.o
arch/arm/mach-mediatek/mt8195/init.c new file +97 -0
new file mode 100644
index 0000000000..8d6b700e7e
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 MediaTek Inc.
+ * Copyright (C) 2023 BayLibre, SAS
+ * Author: Macpaul Lin <[email protected]>
+ * Author: Fabien Parent <[email protected]>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <cpu_func.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <ram.h>
+#include <asm/arch/misc.h>
+#include <asm/armv8/mmu.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <dm/uclass.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	int ret;
+
+	ret = fdtdec_setup_memory_banksize();
+	if (ret)
+		return ret;
+
+	fdtdec_setup_mem_size_base();
+
+	/*
+	 * Limit gd->ram_top not exceeding SZ_4G.
+	 * Because some periphals like mmc requires DMA buffer
+	 * allocaed below SZ_4G.
+	 *
+	 * Note: SZ_2M is for adjusting gd->relocaddr,
+	 *       the reserved memory for u-boot itself.
+	 */
+	if (gd->ram_base + gd->ram_size >= SZ_4G)
+		gd->mon_len = SZ_4G + gd->ram_base + SZ_2M;
+
+	return 0;
+}
+
+int dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = gd->ram_base;
+	gd->bd->bi_dram[0].size = gd->ram_size;
+
+	return 0;
+}
+
+int mtk_pll_early_init(void)
+{
+	return 0;
+}
+
+int mtk_soc_early_init(void)
+{
+	return 0;
+}
+
+#if !IS_ENABLED(CONFIG_SYSRESET)
+void reset_cpu(void)
+{
+	psci_system_reset();
+}
+#endif
+
+int print_cpuinfo(void)
+{
+	printf("CPU:   MediaTek MT8195\n");
+	return 0;
+}
+
+static struct mm_region mt8195_mem_map[] = {
+	{
+		/* DDR */
+		.virt = 0x40000000UL,
+		.phys = 0x40000000UL,
+		.size = 0x200000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE,
+	}, {
+		.virt = 0x00000000UL,
+		.phys = 0x00000000UL,
+		.size = 0x20000000UL,
+		.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+			 PTE_BLOCK_NON_SHARE |
+			 PTE_BLOCK_PXN | PTE_BLOCK_UXN
+	}, {
+		0,
+	}
+};
+
+struct mm_region *mem_map = mt8195_mem_map;