*** Add support for phyCORE-AM62x ***
Subsystems (2)
v3 cover *** Add support for phyCORE-AM62x ***
v3:
- Add boot modes chapter
- Reference tiboot3.bin instead of GP binary for default flashing
- Minor spelling fixes
- Pick up Reviewed-by: Dhruva Gole <[email protected]>
v2: https://lists.denx.de/pipermail/u-boot/2023-November/538971.html
v1: https://lists.denx.de/pipermail/u-boot/2023-October/535750.html
Wadim Egorov (2):
board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM
doc: board: phytec: Add phyCORE-AM62x
arch/arm/dts/Makefile | 4 +- .../arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsi | 2190 +++++++++++++++++ arch/arm/dts/k3-am62-phycore-som.dtsi | 324 +++ .../k3-am625-phyboard-lyra-rdk-u-boot.dtsi | 166 ++ arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts | 266 ++ arch/arm/dts/k3-am625-phycore-som-binman.dtsi | 380 +++ arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts | 119 + arch/arm/mach-k3/am62x/Kconfig | 17 + board/phytec/phycore_am62x/Kconfig | 33 + board/phytec/phycore_am62x/MAINTAINERS | 15 + board/phytec/phycore_am62x/Makefile | 8 + board/phytec/phycore_am62x/board-cfg.yaml | 36 + board/phytec/phycore_am62x/phycore-am62x.c | 59 + board/phytec/phycore_am62x/phycore_am62x.env | 23 + board/phytec/phycore_am62x/pm-cfg.yaml | 12 + board/phytec/phycore_am62x/rm-cfg.yaml | 1088 ++++++++ board/phytec/phycore_am62x/sec-cfg.yaml | 379 +++ configs/phycore_am62x_a53_defconfig | 115 + configs/phycore_am62x_r5_defconfig | 130 + doc/board/phytec/index.rst | 1 + doc/board/phytec/phycore-am62x.rst | 158 ++ doc/board/ti/k3.rst | 1 + include/configs/phycore_am62x.h | 15 + 23 files changed, 5538 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsi create mode 100644 arch/arm/dts/k3-am62-phycore-som.dtsi create mode 100644 arch/arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsi create mode 100644 arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts create mode 100644 arch/arm/dts/k3-am625-phycore-som-binman.dtsi create mode 100644 arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts create mode 100644 board/phytec/phycore_am62x/Kconfig create mode 100644 board/phytec/phycore_am62x/MAINTAINERS create mode 100644 board/phytec/phycore_am62x/Makefile create mode 100644 board/phytec/phycore_am62x/board-cfg.yaml create mode 100644 board/phytec/phycore_am62x/phycore-am62x.c create mode 100644 board/phytec/phycore_am62x/phycore_am62x.env create mode 100644 board/phytec/phycore_am62x/pm-cfg.yaml create mode 100644 board/phytec/phycore_am62x/rm-cfg.yaml create mode 100644 board/phytec/phycore_am62x/sec-cfg.yaml create mode 100644 configs/phycore_am62x_a53_defconfig create mode 100644 configs/phycore_am62x_r5_defconfig create mode 100644 doc/board/phytec/phycore-am62x.rst create mode 100644 include/configs/phycore_am62x.h
Signature · 1 line
2.34.1
PATCH v3 1/2 board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM
Add basic support for PHYTEC phyCORE-AM62x SoM.
Supported features:
- 2GB DDR4 RAM
- eMMC Flash
- OSPI NOR Flash
- external uSD
- Ethernet
- debug UART
Product page SoM: https://www.phytec.com/product/phycore-am62x
Device trees were taken from Linux v6.7-rc3.
---
v3:
- Pick up Reviewed-by: Dhruva Gole <[email protected]>
--- arch/arm/dts/Makefile | 4 +- .../arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsi | 2190 +++++++++++++++++ arch/arm/dts/k3-am62-phycore-som.dtsi | 324 +++ .../k3-am625-phyboard-lyra-rdk-u-boot.dtsi | 166 ++ arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts | 266 ++ arch/arm/dts/k3-am625-phycore-som-binman.dtsi | 380 +++ arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts | 119 + arch/arm/mach-k3/am62x/Kconfig | 17 + board/phytec/phycore_am62x/Kconfig | 33 + board/phytec/phycore_am62x/MAINTAINERS | 15 + board/phytec/phycore_am62x/Makefile | 8 + board/phytec/phycore_am62x/board-cfg.yaml | 36 + board/phytec/phycore_am62x/phycore-am62x.c | 59 + board/phytec/phycore_am62x/phycore_am62x.env | 23 + board/phytec/phycore_am62x/pm-cfg.yaml | 12 + board/phytec/phycore_am62x/rm-cfg.yaml | 1088 ++++++++ board/phytec/phycore_am62x/sec-cfg.yaml | 379 +++ configs/phycore_am62x_a53_defconfig | 115 + configs/phycore_am62x_r5_defconfig | 130 + include/configs/phycore_am62x.h | 15 + 20 files changed, 5378 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsi create mode 100644 arch/arm/dts/k3-am62-phycore-som.dtsi create mode 100644 arch/arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsi create mode 100644 arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts create mode 100644 arch/arm/dts/k3-am625-phycore-som-binman.dtsi create mode 100644 arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts create mode 100644 board/phytec/phycore_am62x/Kconfig create mode 100644 board/phytec/phycore_am62x/MAINTAINERS create mode 100644 board/phytec/phycore_am62x/Makefile create mode 100644 board/phytec/phycore_am62x/board-cfg.yaml create mode 100644 board/phytec/phycore_am62x/phycore-am62x.c create mode 100644 board/phytec/phycore_am62x/phycore_am62x.env create mode 100644 board/phytec/phycore_am62x/pm-cfg.yaml create mode 100644 board/phytec/phycore_am62x/rm-cfg.yaml create mode 100644 board/phytec/phycore_am62x/sec-cfg.yaml create mode 100644 configs/phycore_am62x_a53_defconfig create mode 100644 configs/phycore_am62x_r5_defconfig create mode 100644 include/configs/phycore_am62x.h
arch/arm/dts/Makefile +3 -1
@@ -1418,7 +1418,9 @@ dtb-$(CONFIG_SOC_K3_AM625) += k3-am625-sk.dtb \ k3-am625-beagleplay.dtb \ k3-am625-r5-beagleplay.dtb \ k3-am625-verdin-wifi-dev.dtb \ - k3-am625-verdin-r5.dtb + k3-am625-verdin-r5.dtb \ + k3-am625-phyboard-lyra-rdk.dtb \ + k3-am625-r5-phycore-som-2gb.dtb dtb-$(CONFIG_SOC_K3_AM62A7) += k3-am62a7-sk.dtb \ k3-am62a7-r5-sk.dtb
arch/arm/dts/k3-am62-phycore-som-ddr4-2gb.dtsi new file +2190 -0
2,190 lines not on this page · raw message
arch/arm/dts/k3-am62-phycore-som.dtsi new file +324 -0
324 lines not on this page · raw message
arch/arm/dts/k3-am625-phyboard-lyra-rdk-u-boot.dtsi new file +166 -0
166 lines not on this page · raw message
arch/arm/dts/k3-am625-phyboard-lyra-rdk.dts new file +266 -0
266 lines not on this page · raw message
arch/arm/dts/k3-am625-phycore-som-binman.dtsi new file +380 -0
44 lines not on this page · raw message
arch/arm/dts/k3-am625-r5-phycore-som-2gb.dts new file +119 -0
119 lines not on this page · raw message
board/phytec/phycore_am62x/Kconfig new file +33 -0
Lines of this file are not shown. View the raw message.
board/phytec/phycore_am62x/MAINTAINERS new file +15 -0
Lines of this file are not shown. View the raw message.
board/phytec/phycore_am62x/Makefile new file +8 -0
Lines of this file are not shown. View the raw message.
board/phytec/phycore_am62x/board-cfg.yaml new file +36 -0
Lines of this file are not shown. View the raw message.
board/phytec/phycore_am62x/phycore-am62x.c new file +59 -0
59 lines not on this page · raw message
board/phytec/phycore_am62x/phycore_am62x.env new file +23 -0
Lines of this file are not shown. View the raw message.
board/phytec/phycore_am62x/pm-cfg.yaml new file +12 -0
Lines of this file are not shown. View the raw message.
board/phytec/phycore_am62x/rm-cfg.yaml new file +1088 -0
1,088 lines not on this page · raw message
board/phytec/phycore_am62x/sec-cfg.yaml new file +379 -0
379 lines not on this page · raw message
configs/phycore_am62x_a53_defconfig new file +115 -0
115 lines not on this page · raw message
configs/phycore_am62x_r5_defconfig new file +130 -0
130 lines not on this page · raw message
include/configs/phycore_am62x.h new file +15 -0
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.34.1
Part of the diff is not shown here. View the raw message.
Re: [PATCH v3 1/2] board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM
Quoted 10 lines · Wadim Egorov
Add basic support for PHYTEC phyCORE-AM62x SoM.
Supported features:
- 2GB DDR4 RAM
- eMMC Flash
- OSPI NOR Flash
- external uSD
- Ethernet
- debug UART
Quoted 6 lines
Product page SoM: https://www.phytec.com/product/phycore-am62x
Device trees were taken from Linux v6.7-rc3.
Signed-off-by Wadim Egorov <[email protected]>Reviewed-by Dhruva Gole <[email protected]>
Please rebase this on current -next as phycore_am62x_r5 fails to build due to yaml schema moving around, thanks.
Signature · 1 line
Tom
PATCH v3 2/2 doc: board: phytec: Add phyCORE-AM62x
In reply to Wadim EgorovAdd documentation for PHYTEC phyCORE-AM62x SoM.
---
v3:
- Add boot modes chapter
- Reference tiboot3.bin instead of GP binary for default flashing
- Minor spelling fixes
- Pick up Reviewed-by: Dhruva Gole <[email protected]>
--- doc/board/phytec/index.rst | 1 + doc/board/phytec/phycore-am62x.rst | 158 +++++++++++++++++++++++++++++ doc/board/ti/k3.rst | 1 + 3 files changed, 160 insertions(+) create mode 100644 doc/board/phytec/phycore-am62x.rst
doc/board/phytec/index.rst +1 -0
@@ -6,5 +6,6 @@ PHYTEC .. toctree:: :maxdepth: 2 + phycore-am62x phycore-imx8mm phycore-imx8mp
doc/board/phytec/phycore-am62x.rst new file +158 -0
158 lines not on this page · raw message
doc/board/ti/k3.rst +1 -0
@@ -33,6 +33,7 @@ K3 Based SoCs am62ax_sk am62x_sk ../beagle/am62x_beagleplay + ../phytec/phycore-am62x ../toradex/verdin-am62 am64x_evm am65x_evm
Signature · 1 line
2.34.1