Add device tree for IBM system1 BMC
Subsystems (3)
v3 cover Add device tree for IBM system1 BMC
This patchset adds device tree for IBM system1 bmc board.
Change log:
v1:
- Added device binding for IBM system1-bmc
- Added device binding for TIS I2C devices
- Added device tree for IBM system1 BMC board
- Added i2c and muxes
- Added voltage regulators
- Added GPIO, Fan ctrl, Led
- Added more compatible strings for tpm_tis_i2c
- Added power supplies, sensors, EEPROMS, TPM and more
v2:
- Incorporated review comments from Conor Dooley, Jarkko Sakkinen, Guenter Roeck, Rob Herring, Krzysztof Kozlowski
- Merge all patches into single patch.
- Split the trivial device patch.
- Cleanup commit messages.
- Fixed bootargs string.
- Fixed node names.
- Dropped tpm schema patch as it is covered by Lukas's patch.
- Dropped "tpm: tis-i2c: Add more compatible strings" patch and send it as a separate patch.
v3:
- Fixed voltage-regulators names.
- Updated commit message about TPM compatibility string.
Andrew Geissler (1):
ARM: dts: aspeed: System1: IBM system1 BMC board
Ninad Palsule (2):
dt-bindings: arm: aspeed: add IBM system1-bmc
dt-bindings: Add DPS310 as trivial device
.../bindings/arm/aspeed/aspeed.yaml | 1 + .../devicetree/bindings/trivial-devices.yaml | 2 + arch/arm/boot/dts/aspeed/Makefile | 1 + .../dts/aspeed/aspeed-bmc-ibm-system1.dts | 1623 +++++++++++++++++ 4 files changed, 1627 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
Signature · 1 line
2.39.2
PATCH v3 1/3 dt-bindings: arm: aspeed: add IBM system1-bmc
Document the new compatibles used on IBM system1-bmc
--- Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +1 -0
@@ -82,6 +82,7 @@ properties: - facebook,yosemite4-bmc - ibm,everest-bmc - ibm,rainier-bmc + - ibm,system1-bmc - ibm,tacoma-bmc - inventec,starscream-bmc - inventec,transformer-bmc
Signature · 1 line
2.39.2
Re: [PATCH v3 1/3] dt-bindings: arm: aspeed: add IBM system1-bmc
Quoted 6 lines · Ninad Palsule
Document the new compatibles used on IBM system1-bmc
Signed-off-by Ninad Palsule <[email protected]>--- Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 + 1 file changed, 1 insertion(+)
This is a friendly reminder during the review process.
It looks like you received a tag and forgot to add it.
If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions, under or above your Signed-off-by tag. Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply.
https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
If a tag was not added on purpose, please state why and what changed.
Best regards,
Krzysztof
Re: [PATCH v3 1/3] dt-bindings: arm: aspeed: add IBM system1-bmc
Hi Krzysztof,
Quoted 19 lines · Krzysztof Kozlowski
Quoted 6 lines · Ninad Palsule
Document the new compatibles used on IBM system1-bmc
Signed-off-by Ninad Palsule <[email protected]>--- Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 + 1 file changed, 1 insertion(+)This is a friendly reminder during the review process.
It looks like you received a tag and forgot to add it.
If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions, under or above your Signed-off-by tag. Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply.
Quoted 3 lines
https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
If a tag was not added on purpose, please state why and what changed.
This is a mistake from my side. Sorry about that. I will remember it next time.
Thanks & Regards,
Ninad
PATCH v3 2/3 dt-bindings: Add DPS310 as trivial device
In reply to Ninad PalsuleInfineon DPS310 is a barometric pressure and temperature sensor.
--- Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/trivial-devices.yaml +2 -0
@@ -133,6 +133,8 @@ properties: - ibm,cffps1 # IBM Common Form Factor Power Supply Versions 2 - ibm,cffps2 + # Infineon barometric pressure and temperature sensor + - infineon,dps310 # Infineon IR36021 digital POL buck controller - infineon,ir36021 # Infineon IR38060 Voltage Regulator
Signature · 1 line
2.39.2
Re: [PATCH v3 2/3] dt-bindings: Add DPS310 as trivial device
Quoted 3 lines · Ninad Palsule
Infineon DPS310 is a barometric pressure and temperature sensor.
Signed-off-by Ninad Palsule <[email protected]>
This is a friendly reminder during the review process.
It looks like you received a tag and forgot to add it.
If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions, under or above your Signed-off-by tag. Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply.
https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
If a tag was not added on purpose, please state why and what changed.
Best regards,
Krzysztof
Re: [PATCH v3 2/3] dt-bindings: Add DPS310 as trivial device
Hello Krzysztof,
Quoted 16 lines · Krzysztof Kozlowski
Quoted 3 lines · Ninad Palsule
Infineon DPS310 is a barometric pressure and temperature sensor.
Signed-off-by Ninad Palsule <[email protected]>This is a friendly reminder during the review process.
It looks like you received a tag and forgot to add it.
If you do not know the process, here is a short explanation:
Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions, under or above your Signed-off-by tag. Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply.
Quoted 3 lines
https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
If a tag was not added on purpose, please state why and what changed.
This is a mistake from my side. Sorry about that. I will remember it next time.
Thanks & Regards,
Ninad
PATCH v3 3/3 ARM: dts: aspeed: System1: IBM system1 BMC board
In reply to Ninad PalsuleFrom: Andrew Geissler <[email protected]>
Add a device tree for IBM system1 BMC board. It uses AST2600 SOC.
- Added base board
- Added i2c devices and muxes.
- Added different voltage regulators.
- Added GPIO pin assignements, GPIO expansion devices
- Added LED brinker devices
- Added Fan controllers
- Added EEPROM/VPD
- Added Power supplies
- Added Humidity, pressure and temperature sensors.
- Added Trusted platform module(TPM) chip.
Tested:
This board is tested using the simics simulator.
---
The compatibility string and schema for tpm device is documented in the
following patch series:
-https://lore.kernel.org/all/77fe0ccd-53ff-4773-9787-0d038434297f at linux.ibm.com/ -https://lore.kernel.org/all/3f56f0a2bb90697a23e83583a21684b75dc7eea2.1701093036.git.lukas at wunner.de/
v3:
- Fixed the voltage-regulator names.
v2:
- Incorporated review comments from Conor Dooley, Jarkko Sakkinen, Guenter Roeck, Rob Herring, Krzysztof Kozlowski
- Merge all patches into single patch.
- Split the trivial device patch.
- Cleanup commit messages.
- Fixed bootargs string.
- Fixed node names.
- Dropped tpm schema patch as it is covered by Lukas's patch.
- Dropped "tpm: tis-i2c: Add more compatible strings" patch and send it as a separate patch.
--- arch/arm/boot/dts/aspeed/Makefile | 1 + .../dts/aspeed/aspeed-bmc-ibm-system1.dts | 1623 +++++++++++++++++ 2 files changed, 1624 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
arch/arm/boot/dts/aspeed/Makefile +1 -0
@@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-ibm-rainier.dtb \ aspeed-bmc-ibm-rainier-1s4u.dtb \ aspeed-bmc-ibm-rainier-4u.dtb \ + aspeed-bmc-ibm-system1.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-inspur-fp5280g2.dtb \ aspeed-bmc-inspur-nf5280m6.dtb \
arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts new file +1623 -0
1,623 lines not on this page · raw message
Signature · 1 line
2.39.2