Skip to contentSkip to conversation

config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm

PATCH Applied Lukasz Majewski 4 participants 5 messages Aug 9, 2024 – Aug 23, 2024 Arm i.MX and Layerscape

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm

This command allows easy update on SD card or eMMC of the flash.bin generated (with binman) during u-boot build.

---
Changes for v2:
- Remove 'update_mmc_part' variable
- Change path for hostname
- Use full version of dhcp command (${loadaddr} added)

Changes for v3:
- Remove +1 when calculating the size of binary to be written

Changes for v4:
- Replace ${hostname} with ${update_filepath}

---
 include/configs/phycore_imx8mm.h | 8 ++++++++
 1 file changed, 8 insertions(+)
include/configs/phycore_imx8mm.h +8 -0
index dd7cfdba52..0910ae2d87 100644
@@ -29,6 +29,14 @@
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 	"mmcpart=1\0" \
 	"mmcroot=2\0" \
+	"update_offset=0x42\0" \
+	"update_filename=flash.bin\0" \
+	"update_bootimg="						\
+		"mmc dev ${mmcdev} ; "		\
+		"if dhcp ${loadaddr} ${update_filepath}/${update_filename} ; then "	\
+		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
+		"mmc write ${loadaddr} ${update_offset} ${fw_sz} ; "	\
+		"fi\0" \
 	"mmcautodetect=yes\0" \
 	"mmcargs=setenv bootargs console=${console} " \
 		"root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw\0" \
Signature · 1 line
2.39.2
Reviewed-by on v4 1/1
#1 lore raw
Quoted 4 lines · Lukasz Majewski

This command allows easy update on SD card or eMMC of the flash.bin generated (with binman) during u-boot build.

Quoted 34 lines

---
Changes for v2:
- Remove 'update_mmc_part' variable
- Change path for hostname
- Use full version of dhcp command (${loadaddr} added)

Changes for v3:
- Remove +1 when calculating the size of binary to be written

Changes for v4:
- Replace ${hostname} with ${update_filepath}

---
  include/configs/phycore_imx8mm.h | 8 ++++++++
  1 file changed, 8 insertions(+)
include/configs/phycore_imx8mm.h +8 -0
index dd7cfdba52..0910ae2d87 100644
@@ -29,6 +29,14 @@
  	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  	"mmcpart=1\0" \
  	"mmcroot=2\0" \
+	"update_offset=0x42\0" \
+	"update_filename=flash.bin\0" \
+	"update_bootimg="						\
+		"mmc dev ${mmcdev} ; "		\
+		"if dhcp ${loadaddr} ${update_filepath}/${update_filename} ; then "	\
+		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
+		"mmc write ${loadaddr} ${update_offset} ${fw_sz} ; "	\
+		"fi\0" \
  	"mmcautodetect=yes\0" \
  	"mmcargs=setenv bootargs console=${console} " \
  		"root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw\0" \
Tested-by on v4 1/1
#2 lore raw
In reply to Lukasz Majewski

Am Freitag, dem 09.08.2024 um 18:53 +0200 schrieb Lukasz Majewski:

Quoted 4 lines

This command allows easy update on SD card or eMMC of the flash.bin generated (with binman) during u-boot build.

Quoted 40 lines

---
Changes for v2:
- Remove 'update_mmc_part' variable
- Change path for hostname
- Use full version of dhcp command (${loadaddr} added)

Changes for v3:
- Remove +1 when calculating the size of binary to be written

Changes for v4:
- Replace ${hostname} with ${update_filepath}
---
 include/configs/phycore_imx8mm.h | 8 ++++++++

 1 file changed, 8 insertions(+)
include/configs/phycore_imx8mm.h +7 -0
index dd7cfdba52..0910ae2d87 100644
@@ -29,6 +29,14 @@
         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
         "mmcpart=1\0" \
         "mmcroot=2\0" \
+       "update_offset=0x42\0" \
+       "update_filename=flash.bin\0" \
+       "update_bootimg="                                            
    \
+               "mmc dev ${mmcdev} ; "          \
+               "if dhcp ${loadaddr}
 ${update_filepath}/${update_filename} ; then "     \
+               "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block
 size */ \
+               "mmc write ${loadaddr} ${update_offset} ${fw_sz} ;

"    \
+               "fi\0" \
        "mmcautodetect=yes\0" \
        "mmcargs=setenv bootargs console=${console} " \
                "root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw\0" \

Signature · 5 lines
PHYTEC Messtechnik GmbH | Barcelona-Allee 1 | 55129 Mainz, Germany

Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber,
Dipl.-Ing. (FH) Markus Lickes | Handelsregister Mainz HRB 4656 |
Finanzamt Mainz | St.Nr. 266500608, DE 149059855