config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm
PATCH v4 1/1 config: Add 'update_bootimg' command to update flash.bin on Phytec's imx8mm
This command allows easy update on SD card or eMMC of the flash.bin generated (with binman) during u-boot build.
---
Changes for v2:
- Remove 'update_mmc_part' variable
- Change path for hostname
- Use full version of dhcp command (${loadaddr} added)
Changes for v3:
- Remove +1 when calculating the size of binary to be written
Changes for v4:
- Replace ${hostname} with ${update_filepath}
--- include/configs/phycore_imx8mm.h | 8 ++++++++ 1 file changed, 8 insertions(+)
include/configs/phycore_imx8mm.h +8 -0
@@ -29,6 +29,14 @@ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \"mmcpart=1\0" \"mmcroot=2\0" \ +"update_offset=0x42\0" \ +"update_filename=flash.bin\0" \ +"update_bootimg=" \ +"mmc dev ${mmcdev} ; " \ +"if dhcp ${loadaddr} ${update_filepath}/${update_filename} ; then " \ +"setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ +"mmc write ${loadaddr} ${update_offset} ${fw_sz} ; " \ +"fi\0" \"mmcautodetect=yes\0" \"mmcargs=setenv bootargs console=${console} " \"root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw\0" \
Signature · 1 line
2.39.2
Quoted 4 lines · Lukasz Majewski
This command allows easy update on SD card or eMMC of the flash.bin generated (with binman) during u-boot build.
Signed-off-by Lukasz Majewski <[email protected]>
Quoted 34 lines
---
Changes for v2:
- Remove 'update_mmc_part' variable
- Change path for hostname
- Use full version of dhcp command (${loadaddr} added)Changes for v3:
- Remove +1 when calculating the size of binary to be writtenChanges for v4:
- Replace ${hostname} with ${update_filepath}--- include/configs/phycore_imx8mm.h | 8 ++++++++ 1 file changed, 8 insertions(+)include/configs/phycore_imx8mm.h +8
-0@@ -29,6 +29,14 @@ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \"mmcpart=1\0" \"mmcroot=2\0" \ +"update_offset=0x42\0" \ +"update_filename=flash.bin\0" \ +"update_bootimg=" \ +"mmc dev ${mmcdev} ; " \ +"if dhcp ${loadaddr} ${update_filepath}/${update_filename} ; then " \ +"setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ +"mmc write ${loadaddr} ${update_offset} ${fw_sz} ; " \ +"fi\0" \"mmcautodetect=yes\0" \"mmcargs=setenv bootargs console=${console} " \"root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw\0" \
Am Freitag, dem 09.08.2024 um 18:53 +0200 schrieb Lukasz Majewski:
Quoted 4 lines
This command allows easy update on SD card or eMMC of the flash.bin generated (with binman) during u-boot build.
Signed-off-by Lukasz Majewski <[email protected]>
Quoted 40 lines
---
Changes for v2:
- Remove 'update_mmc_part' variable
- Change path for hostname
- Use full version of dhcp command (${loadaddr} added)Changes for v3:
- Remove +1 when calculating the size of binary to be writtenChanges for v4:
- Replace ${hostname} with ${update_filepath}
---
include/configs/phycore_imx8mm.h | 8 ++++++++1 file changed, 8 insertions(+)include/configs/phycore_imx8mm.h +7
-0@@ -29,6 +29,14 @@"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ "mmcpart=1\0" \ "mmcroot=2\0" \ +"update_offset=0x42\0" \ +"update_filename=flash.bin\0" \ +"update_bootimg=" \ +"mmc dev ${mmcdev} ; " \ +"if dhcp ${loadaddr} ${update_filepath}/${update_filename} ; then " \ +"setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ + "mmc write ${loadaddr} ${update_offset} ${fw_sz} ;" \
+ "fi\0" \
"mmcautodetect=yes\0" \
"mmcargs=setenv bootargs console=${console} " \
"root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw\0" \
Signature · 5 lines
PHYTEC Messtechnik GmbH | Barcelona-Allee 1 | 55129 Mainz, Germany Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber, Dipl.-Ing. (FH) Markus Lickes | Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE 149059855
Quoted 5 lines · Lukasz Majewski
This command allows easy update on SD card or eMMC of the flash.bin generated (with binman) during u-boot build.
Signed-off-by Lukasz Majewski <[email protected]>
Quoted 5 lines · Lukasz Majewski
This command allows easy update on SD card or eMMC of the flash.bin generated (with binman) during u-boot build.
Signed-off-by Lukasz Majewski <[email protected]>
Applied, thanks.