Skip to contentSkip to conversation

net: stmmac: Refactor FPE as a separate module

PATCH Superseded Furong Xu 2 participants 9 messages Oct 28, 2024 – Oct 30, 2024

Subsystems (4)

v5 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Furong Xu

author
#0 lore raw

v5 cover net: stmmac: Refactor FPE as a separate module

Refactor FPE implementation by moving common code for DWMAC4 and DWXGMAC into a separate FPE module.

FPE implementation for DWMAC4 and DWXGMAC differs only for:
1) Offset address of MAC_FPE_CTRL_STS and MTL_FPE_CTRL_STS
2) FPRQ(Frame Preemption Residue Queue) field in MAC_RxQ_Ctrl1
3) Bit offset of Frame Preemption Interrupt Enable

Tested on DWMAC CORE 5.20a and DWXGMAC CORE 3.20a

Changes in v5:
1. Fix build errors reported by kernel test robot:
https://lore.kernel.org/oe-kbuild-all/[email protected]/

Changes in v4:
1. Update FPE IRQ handling
2. Check fpesel bit and stmmac_fpe_reg pointer to guarantee that driver does not crash on a certain platform that FPE is to be implemented

Changes in v3:
1. Drop stmmac_fpe_ops and refactor FPE functions to generic version to avoid function pointers
2. Drop the _SHIFT macro definitions

Changes in v2:
1. Split patches to easily review
2. Use struct as function param to keep param list short
3. Typo fixes in commit message and title

Furong Xu (6):
net: stmmac: Introduce separate files for FPE implementation
net: stmmac: Rework macro definitions for gmac4 and xgmac
net: stmmac: Refactor FPE functions to generic version
net: stmmac: xgmac: Rename XGMAC_RQ to XGMAC_FPRQ
net: stmmac: xgmac: Complete FPE support
net: stmmac: xgmac: Enable FPE for tc-mqprio/tc-taprio

 drivers/net/ethernet/stmicro/stmmac/Makefile  |   2 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac4.h  |   1 -
 .../net/ethernet/stmicro/stmmac/dwmac4_core.c |  11 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac5.c  | 150 -------
 drivers/net/ethernet/stmicro/stmmac/dwmac5.h  |  26 --
 .../net/ethernet/stmicro/stmmac/dwxgmac2.h    |   6 +-
 .../ethernet/stmicro/stmmac/dwxgmac2_core.c   |  31 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.c    |   7 +
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |  20 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  11 +-
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  |   6 +-
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.c  | 412 ++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.h  |  44 ++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 157 +------
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   |   4 +-
 15 files changed, 481 insertions(+), 407 deletions(-)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h
Signature · 1 line
2.34.1
author
#1 lore raw

PATCH v5 1/6 net: stmmac: Introduce separate files for FPE implementation

By moving FPE related code info separate files, FPE implementation becomes a separate module initially.
No functional change intended.

---
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   2 +-
 .../net/ethernet/stmicro/stmmac/dwmac4_core.c |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac5.c  | 150 --------
 drivers/net/ethernet/stmicro/stmmac/dwmac5.h  |  26 --
 .../net/ethernet/stmicro/stmmac/dwxgmac2.h    |   2 -
 .../ethernet/stmicro/stmmac/dwxgmac2_core.c   |  27 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  10 -
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  |   2 +-
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.c  | 354 ++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.h  |  45 +++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 149 +-------
 11 files changed, 405 insertions(+), 363 deletions(-)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h
drivers/net/ethernet/stmicro/stmmac/Makefile +1 -1
index c2f0e91f6bf8..7e46dca90628 100644
@@ -6,7 +6,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o	\
 	      mmc_core.o stmmac_hwtstamp.o stmmac_ptp.o dwmac4_descs.o	\
 	      dwmac4_dma.o dwmac4_lib.o dwmac4_core.o dwmac5.o hwif.o \
 	      stmmac_tc.o dwxgmac2_core.o dwxgmac2_dma.o dwxgmac2_descs.o \
-	      stmmac_xdp.o stmmac_est.o \
+	      stmmac_xdp.o stmmac_est.o stmmac_fpe.o \
 	      $(stmmac-y)
 
 stmmac-$(CONFIG_STMMAC_SELFTESTS) += stmmac_selftests.o
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +1 -0
index e65a65666cc1..4d217926820a 100644
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include "stmmac.h"
+#include "stmmac_fpe.h"
 #include "stmmac_pcs.h"
 #include "dwmac4.h"
 #include "dwmac5.h"
drivers/net/ethernet/stmicro/stmmac/dwmac5.c +0 -150

153 lines not on this page · raw message

drivers/net/ethernet/stmicro/stmmac/dwmac5.h +0 -26
index 6c6eb6790e83..00b151b3b688 100644
@@ -11,15 +11,6 @@
 #define PRTYEN				BIT(1)
 #define TMOUTEN				BIT(0)
 
-#define MAC_FPE_CTRL_STS		0x00000234
-#define TRSP				BIT(19)
-#define TVER				BIT(18)
-#define RRSP				BIT(17)
-#define RVER				BIT(16)
-#define SRSP				BIT(2)
-#define SVER				BIT(1)
-#define EFPE				BIT(0)
-
 #define MAC_PPS_CONTROL			0x00000b70
 #define PPS_MAXIDX(x)			((((x) + 1) * 8) - 1)
 #define PPS_MINIDX(x)			((x) * 8)
@@ -39,12 +30,6 @@
 #define MAC_PPSx_INTERVAL(x)		(0x00000b88 + ((x) * 0x10))
 #define MAC_PPSx_WIDTH(x)		(0x00000b8c + ((x) * 0x10))
 
-#define MTL_FPE_CTRL_STS		0x00000c90
-/* Preemption Classification */
-#define DWMAC5_PREEMPTION_CLASS		GENMASK(15, 8)
-/* Additional Fragment Size of preempted frames */
-#define DWMAC5_ADD_FRAG_SZ		GENMASK(1, 0)
-
 #define MTL_RXP_CONTROL_STATUS		0x00000ca0
 #define RXPI				BIT(31)
 #define NPE				GENMASK(23, 16)
@@ -108,16 +93,5 @@ int dwmac5_rxp_config(void __iomem *ioaddr, struct stmmac_tc_entry *entries,
 int dwmac5_flex_pps_config(void __iomem *ioaddr, int index,
 			   struct stmmac_pps_cfg *cfg, bool enable,
 			   u32 sub_second_inc, u32 systime_flags);
-void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
-			  u32 num_txq, u32 num_rxq,
-			  bool tx_enable, bool pmac_enable);
-void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
-			     struct stmmac_fpe_cfg *cfg,
-			     enum stmmac_mpacket_type type);
-int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
-int dwmac5_fpe_get_add_frag_size(const void __iomem *ioaddr);
-void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size);
-int dwmac5_fpe_map_preemption_class(struct net_device *ndev,
-				    struct netlink_ext_ack *extack, u32 pclass);
 
 #endif /* __DWMAC5_H__ */
drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h +0 -2
index 6a2c7d22df1e..917796293c26 100644
@@ -193,8 +193,6 @@
 #define XGMAC_MDIO_ADDR			0x00000200
 #define XGMAC_MDIO_DATA			0x00000204
 #define XGMAC_MDIO_C22P			0x00000220
-#define XGMAC_FPE_CTRL_STS		0x00000280
-#define XGMAC_EFPE			BIT(0)
 #define XGMAC_ADDRx_HIGH(x)		(0x00000300 + (x) * 0x8)
 #define XGMAC_ADDR_MAX			32
 #define XGMAC_AE			BIT(31)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +1 -26
index f519d43738b0..111ba5a524ed 100644
@@ -8,6 +8,7 @@
 #include <linux/crc32.h>
 #include <linux/iopoll.h>
 #include "stmmac.h"
+#include "stmmac_fpe.h"
 #include "stmmac_ptp.h"
 #include "dwxlgmac2.h"
 #include "dwxgmac2.h"
@@ -1504,32 +1505,6 @@ static void dwxgmac2_set_arp_offload(struct mac_device_info *hw, bool en,
 	writel(value, ioaddr + XGMAC_RX_CONFIG);
 }
 
-static void dwxgmac3_fpe_configure(void __iomem *ioaddr,
-				   struct stmmac_fpe_cfg *cfg,
-				   u32 num_txq, u32 num_rxq,
-				   bool tx_enable, bool pmac_enable)
-{
-	u32 value;
-
-	if (!tx_enable) {
-		value = readl(ioaddr + XGMAC_FPE_CTRL_STS);
-
-		value &= ~XGMAC_EFPE;
-
-		writel(value, ioaddr + XGMAC_FPE_CTRL_STS);
-		return;
-	}
-
-	value = readl(ioaddr + XGMAC_RXQ_CTRL1);
-	value &= ~XGMAC_RQ;
-	value |= (num_rxq - 1) << XGMAC_RQ_SHIFT;
-	writel(value, ioaddr + XGMAC_RXQ_CTRL1);
-
-	value = readl(ioaddr + XGMAC_FPE_CTRL_STS);
-	value |= XGMAC_EFPE;
-	writel(value, ioaddr + XGMAC_FPE_CTRL_STS);
-}
-
 const struct stmmac_ops dwxgmac210_ops = {
 	.core_init = dwxgmac2_core_init,
 	.set_mac = dwxgmac2_set_mac,
drivers/net/ethernet/stmicro/stmmac/stmmac.h +0 -10
index ea135203ff2e..816b979e72cc 100644
@@ -146,15 +146,6 @@ struct stmmac_channel {
 	u32 index;
 };
 
-/* FPE link-partner hand-shaking mPacket type */
-enum stmmac_mpacket_type {
-	MPACKET_VERIFY = 0,
-	MPACKET_RESPONSE = 1,
-};
-
-#define STMMAC_FPE_MM_MAX_VERIFY_RETRIES	3
-#define STMMAC_FPE_MM_MAX_VERIFY_TIME_MS	128
-
 struct stmmac_fpe_cfg {
 	/* Serialize access to MAC Merge state between ethtool requests
 	 * and link state updates.
@@ -420,7 +411,6 @@ bool stmmac_eee_init(struct stmmac_priv *priv);
 int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt);
 int stmmac_reinit_ringparam(struct net_device *dev, u32 rx_size, u32 tx_size);
 int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled);
-void stmmac_fpe_apply(struct stmmac_priv *priv);
 
 static inline bool stmmac_xdp_is_enabled(struct stmmac_priv *priv)
 {
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +1 -1
index 2a37592a6281..2792a4c6cbcd 100644
@@ -17,9 +17,9 @@
 #include <linux/net_tstamp.h>
 
 #include "stmmac.h"
+#include "stmmac_fpe.h"
 #include "dwmac_dma.h"
 #include "dwxgmac2.h"
-#include "dwmac5.h"
 
 #define REG_SPACE_SIZE	0x1060
 #define GMAC4_REG_SPACE_SIZE	0x116C
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c new file +354 -0

354 lines not on this page · raw message

drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h new file +45 -0

45 lines not on this page · raw message

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +2 -147

179 lines not on this page · raw message

Signature · 1 line
2.34.1
author
#2 lore raw

PATCH v5 2/6 net: stmmac: Rework macro definitions for gmac4 and xgmac

In reply to Furong Xu

Rename and add macro definitions to better reuse them in common code.

---
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.c  | 77 ++++++++++---------
 1 file changed, 39 insertions(+), 38 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +39 -38
index 0a90e8f0df29..70ea475046f0 100644
@@ -9,23 +9,23 @@
 #include "dwmac5.h"
 #include "dwxgmac2.h"
 
-#define MAC_FPE_CTRL_STS		0x00000234
-#define TRSP				BIT(19)
-#define TVER				BIT(18)
-#define RRSP				BIT(17)
-#define RVER				BIT(16)
-#define SRSP				BIT(2)
-#define SVER				BIT(1)
-#define EFPE				BIT(0)
-
-#define MTL_FPE_CTRL_STS		0x00000c90
+#define GMAC5_MAC_FPE_CTRL_STS		0x00000234
+#define XGMAC_MAC_FPE_CTRL_STS		0x00000280
+
+#define GMAC5_MTL_FPE_CTRL_STS		0x00000c90
+#define XGMAC_MTL_FPE_CTRL_STS		0x00001090
 /* Preemption Classification */
-#define DWMAC5_PREEMPTION_CLASS		GENMASK(15, 8)
+#define FPE_MTL_PREEMPTION_CLASS	GENMASK(15, 8)
 /* Additional Fragment Size of preempted frames */
-#define DWMAC5_ADD_FRAG_SZ		GENMASK(1, 0)
+#define FPE_MTL_ADD_FRAG_SZ		GENMASK(1, 0)
 
-#define XGMAC_FPE_CTRL_STS		0x00000280
-#define XGMAC_EFPE			BIT(0)
+#define STMMAC_MAC_FPE_CTRL_STS_TRSP	BIT(19)
+#define STMMAC_MAC_FPE_CTRL_STS_TVER	BIT(18)
+#define STMMAC_MAC_FPE_CTRL_STS_RRSP	BIT(17)
+#define STMMAC_MAC_FPE_CTRL_STS_RVER	BIT(16)
+#define STMMAC_MAC_FPE_CTRL_STS_SRSP	BIT(2)
+#define STMMAC_MAC_FPE_CTRL_STS_SVER	BIT(1)
+#define STMMAC_MAC_FPE_CTRL_STS_EFPE	BIT(0)
 
 void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
 {
@@ -185,7 +185,7 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 	u32 value;
 
 	if (tx_enable) {
-		cfg->fpe_csr = EFPE;
+		cfg->fpe_csr = STMMAC_MAC_FPE_CTRL_STS_EFPE;
 		value = readl(ioaddr + GMAC_RXQ_CTRL1);
 		value &= ~GMAC_RXQCTRL_FPRQ;
 		value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT;
@@ -193,14 +193,14 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 	} else {
 		cfg->fpe_csr = 0;
 	}
-	writel(cfg->fpe_csr, ioaddr + MAC_FPE_CTRL_STS);
+	writel(cfg->fpe_csr, ioaddr + GMAC5_MAC_FPE_CTRL_STS);
 
 	value = readl(ioaddr + GMAC_INT_EN);
 
 	if (pmac_enable) {
 		if (!(value & GMAC_INT_FPE_EN)) {
 			/* Dummy read to clear any pending masked interrupts */
-			readl(ioaddr + MAC_FPE_CTRL_STS);
+			readl(ioaddr + GMAC5_MAC_FPE_CTRL_STS);
 
 			value |= GMAC_INT_FPE_EN;
 		}
@@ -221,24 +221,24 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
 	/* Reads from the MAC_FPE_CTRL_STS register should only be performed
 	 * here, since the status flags of MAC_FPE_CTRL_STS are "clear on read"
 	 */
-	value = readl(ioaddr + MAC_FPE_CTRL_STS);
+	value = readl(ioaddr + GMAC5_MAC_FPE_CTRL_STS);
 
-	if (value & TRSP) {
+	if (value & STMMAC_MAC_FPE_CTRL_STS_TRSP) {
 		status |= FPE_EVENT_TRSP;
 		netdev_dbg(dev, "FPE: Respond mPacket is transmitted\n");
 	}
 
-	if (value & TVER) {
+	if (value & STMMAC_MAC_FPE_CTRL_STS_TVER) {
 		status |= FPE_EVENT_TVER;
 		netdev_dbg(dev, "FPE: Verify mPacket is transmitted\n");
 	}
 
-	if (value & RRSP) {
+	if (value & STMMAC_MAC_FPE_CTRL_STS_RRSP) {
 		status |= FPE_EVENT_RRSP;
 		netdev_dbg(dev, "FPE: Respond mPacket is received\n");
 	}
 
-	if (value & RVER) {
+	if (value & STMMAC_MAC_FPE_CTRL_STS_RVER) {
 		status |= FPE_EVENT_RVER;
 		netdev_dbg(dev, "FPE: Verify mPacket is received\n");
 	}
@@ -252,25 +252,26 @@ void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 	u32 value = cfg->fpe_csr;
 
 	if (type == MPACKET_VERIFY)
-		value |= SVER;
+		value |= STMMAC_MAC_FPE_CTRL_STS_SVER;
 	else if (type == MPACKET_RESPONSE)
-		value |= SRSP;
+		value |= STMMAC_MAC_FPE_CTRL_STS_SRSP;
 
-	writel(value, ioaddr + MAC_FPE_CTRL_STS);
+	writel(value, ioaddr + GMAC5_MAC_FPE_CTRL_STS);
 }
 
 int dwmac5_fpe_get_add_frag_size(const void __iomem *ioaddr)
 {
-	return FIELD_GET(DWMAC5_ADD_FRAG_SZ, readl(ioaddr + MTL_FPE_CTRL_STS));
+	return FIELD_GET(FPE_MTL_ADD_FRAG_SZ,
+			 readl(ioaddr + GMAC5_MTL_FPE_CTRL_STS));
 }
 
 void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size)
 {
 	u32 value;
 
-	value = readl(ioaddr + MTL_FPE_CTRL_STS);
-	writel(u32_replace_bits(value, add_frag_size, DWMAC5_ADD_FRAG_SZ),
-	       ioaddr + MTL_FPE_CTRL_STS);
+	value = readl(ioaddr + GMAC5_MTL_FPE_CTRL_STS);
+	writel(u32_replace_bits(value, add_frag_size, FPE_MTL_ADD_FRAG_SZ),
+	       ioaddr + GMAC5_MTL_FPE_CTRL_STS);
 }
 
 #define ALG_ERR_MSG "TX algorithm SP is not suitable for one-to-many mapping"
@@ -321,9 +322,9 @@ int dwmac5_fpe_map_preemption_class(struct net_device *ndev,
 	}
 
 update_mapping:
-	val = readl(priv->ioaddr + MTL_FPE_CTRL_STS);
-	writel(u32_replace_bits(val, preemptible_txqs, DWMAC5_PREEMPTION_CLASS),
-	       priv->ioaddr + MTL_FPE_CTRL_STS);
+	val = readl(priv->ioaddr + GMAC5_MTL_FPE_CTRL_STS);
+	writel(u32_replace_bits(val, preemptible_txqs, FPE_MTL_PREEMPTION_CLASS),
+	       priv->ioaddr + GMAC5_MTL_FPE_CTRL_STS);
 
 	return 0;
 }
@@ -335,11 +336,11 @@ void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 	u32 value;
 
 	if (!tx_enable) {
-		value = readl(ioaddr + XGMAC_FPE_CTRL_STS);
+		value = readl(ioaddr + XGMAC_MAC_FPE_CTRL_STS);
 
-		value &= ~XGMAC_EFPE;
+		value &= ~STMMAC_MAC_FPE_CTRL_STS_EFPE;
 
-		writel(value, ioaddr + XGMAC_FPE_CTRL_STS);
+		writel(value, ioaddr + XGMAC_MAC_FPE_CTRL_STS);
 		return;
 	}
 
@@ -348,7 +349,7 @@ void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 	value |= (num_rxq - 1) << XGMAC_RQ_SHIFT;
 	writel(value, ioaddr + XGMAC_RXQ_CTRL1);
 
-	value = readl(ioaddr + XGMAC_FPE_CTRL_STS);
-	value |= XGMAC_EFPE;
-	writel(value, ioaddr + XGMAC_FPE_CTRL_STS);
+	value = readl(ioaddr + XGMAC_MAC_FPE_CTRL_STS);
+	value |= STMMAC_MAC_FPE_CTRL_STS_EFPE;
+	writel(value, ioaddr + XGMAC_MAC_FPE_CTRL_STS);
 }
Signature · 1 line
2.34.1
author
#3 lore raw

PATCH v5 3/6 net: stmmac: Refactor FPE functions to generic version

In reply to Furong Xu

FPE implementation for DWMAC4 and DWXGMAC differs only for:
1) Offset address of MAC_FPE_CTRL_STS and MTL_FPE_CTRL_STS
2) FPRQ(Frame Preemption Residue Queue) field in MAC_RxQ_Ctrl1
3) Bit offset of Frame Preemption Interrupt Enable

Refactor FPE functions to avoid code duplication.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac4.h  |   1 -
 .../net/ethernet/stmicro/stmmac/dwmac4_core.c |  10 --
 .../net/ethernet/stmicro/stmmac/dwxgmac2.h    |   2 +-
 .../ethernet/stmicro/stmmac/dwxgmac2_core.c   |   2 -
 drivers/net/ethernet/stmicro/stmmac/hwif.c    |   7 +
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |  20 +--
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |   1 +
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  |   4 +-
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.c  | 144 ++++++++++--------
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.h  |  20 +--
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |   8 +-
 11 files changed, 101 insertions(+), 118 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac4.h +0 -1
index 28fff6cab812..0c050324997a 100644
@@ -69,7 +69,6 @@
 #define GMAC_RXQCTRL_TACPQE		BIT(21)
 #define GMAC_RXQCTRL_TACPQE_SHIFT	21
 #define GMAC_RXQCTRL_FPRQ		GENMASK(26, 24)
-#define GMAC_RXQCTRL_FPRQ_SHIFT		24
 
 /* MAC Packet Filtering */
 #define GMAC_PACKET_FILTER_PR		BIT(0)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +0 -10
index 4d217926820a..c25781874aa7 100644
@@ -1262,11 +1262,6 @@ const struct stmmac_ops dwmac410_ops = {
 	.set_arp_offload = dwmac4_set_arp_offload,
 	.config_l3_filter = dwmac4_config_l3_filter,
 	.config_l4_filter = dwmac4_config_l4_filter,
-	.fpe_configure = dwmac5_fpe_configure,
-	.fpe_send_mpacket = dwmac5_fpe_send_mpacket,
-	.fpe_irq_status = dwmac5_fpe_irq_status,
-	.fpe_get_add_frag_size = dwmac5_fpe_get_add_frag_size,
-	.fpe_set_add_frag_size = dwmac5_fpe_set_add_frag_size,
 	.fpe_map_preemption_class = dwmac5_fpe_map_preemption_class,
 	.add_hw_vlan_rx_fltr = dwmac4_add_hw_vlan_rx_fltr,
 	.del_hw_vlan_rx_fltr = dwmac4_del_hw_vlan_rx_fltr,
@@ -1317,11 +1312,6 @@ const struct stmmac_ops dwmac510_ops = {
 	.set_arp_offload = dwmac4_set_arp_offload,
 	.config_l3_filter = dwmac4_config_l3_filter,
 	.config_l4_filter = dwmac4_config_l4_filter,
-	.fpe_configure = dwmac5_fpe_configure,
-	.fpe_send_mpacket = dwmac5_fpe_send_mpacket,
-	.fpe_irq_status = dwmac5_fpe_irq_status,
-	.fpe_get_add_frag_size = dwmac5_fpe_get_add_frag_size,
-	.fpe_set_add_frag_size = dwmac5_fpe_set_add_frag_size,
 	.fpe_map_preemption_class = dwmac5_fpe_map_preemption_class,
 	.add_hw_vlan_rx_fltr = dwmac4_add_hw_vlan_rx_fltr,
 	.del_hw_vlan_rx_fltr = dwmac4_del_hw_vlan_rx_fltr,
drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h +1 -1
index 917796293c26..efd47db05dbc 100644
@@ -85,7 +85,6 @@
 #define XGMAC_MCBCQ			GENMASK(11, 8)
 #define XGMAC_MCBCQ_SHIFT		8
 #define XGMAC_RQ			GENMASK(7, 4)
-#define XGMAC_RQ_SHIFT			4
 #define XGMAC_UPQ			GENMASK(3, 0)
 #define XGMAC_UPQ_SHIFT			0
 #define XGMAC_RXQ_CTRL2			0x000000a8
@@ -96,6 +95,7 @@
 #define XGMAC_LPIIS			BIT(5)
 #define XGMAC_PMTIS			BIT(4)
 #define XGMAC_INT_EN			0x000000b4
+#define XGMAC_FPEIE			BIT(15)
 #define XGMAC_TSIE			BIT(12)
 #define XGMAC_LPIIE			BIT(5)
 #define XGMAC_PMTIE			BIT(4)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +0 -2
index 111ba5a524ed..de6ffda31a80 100644
@@ -1545,7 +1545,6 @@ const struct stmmac_ops dwxgmac210_ops = {
 	.config_l3_filter = dwxgmac2_config_l3_filter,
 	.config_l4_filter = dwxgmac2_config_l4_filter,
 	.set_arp_offload = dwxgmac2_set_arp_offload,
-	.fpe_configure = dwxgmac3_fpe_configure,
 };
 
 static void dwxlgmac2_rx_queue_enable(struct mac_device_info *hw, u8 mode,
@@ -1602,7 +1601,6 @@ const struct stmmac_ops dwxlgmac2_ops = {
 	.config_l3_filter = dwxgmac2_config_l3_filter,
 	.config_l4_filter = dwxgmac2_config_l4_filter,
 	.set_arp_offload = dwxgmac2_set_arp_offload,
-	.fpe_configure = dwxgmac3_fpe_configure,
 };
 
 int dwxgmac2_setup(struct stmmac_priv *priv)
drivers/net/ethernet/stmicro/stmmac/hwif.c +7 -0
index 88cce28b2f98..cfc50289aed6 100644
@@ -6,6 +6,7 @@
 
 #include "common.h"
 #include "stmmac.h"
+#include "stmmac_fpe.h"
 #include "stmmac_ptp.h"
 #include "stmmac_est.h"
 
@@ -185,6 +186,7 @@ static const struct stmmac_hwif_entry {
 			.ptp_off = PTP_GMAC4_OFFSET,
 			.mmc_off = MMC_GMAC4_OFFSET,
 			.est_off = EST_GMAC4_OFFSET,
+			.fpe_reg = &dwmac5_fpe_reg,
 		},
 		.desc = &dwmac4_desc_ops,
 		.dma = &dwmac4_dma_ops,
@@ -205,6 +207,7 @@ static const struct stmmac_hwif_entry {
 			.ptp_off = PTP_GMAC4_OFFSET,
 			.mmc_off = MMC_GMAC4_OFFSET,
 			.est_off = EST_GMAC4_OFFSET,
+			.fpe_reg = &dwmac5_fpe_reg,
 		},
 		.desc = &dwmac4_desc_ops,
 		.dma = &dwmac410_dma_ops,
@@ -225,6 +228,7 @@ static const struct stmmac_hwif_entry {
 			.ptp_off = PTP_GMAC4_OFFSET,
 			.mmc_off = MMC_GMAC4_OFFSET,
 			.est_off = EST_GMAC4_OFFSET,
+			.fpe_reg = &dwmac5_fpe_reg,
 		},
 		.desc = &dwmac4_desc_ops,
 		.dma = &dwmac410_dma_ops,
@@ -246,6 +250,7 @@ static const struct stmmac_hwif_entry {
 			.ptp_off = PTP_XGMAC_OFFSET,
 			.mmc_off = MMC_XGMAC_OFFSET,
 			.est_off = EST_XGMAC_OFFSET,
+			.fpe_reg = &dwxgmac3_fpe_reg,
 		},
 		.desc = &dwxgmac210_desc_ops,
 		.dma = &dwxgmac210_dma_ops,
@@ -267,6 +272,7 @@ static const struct stmmac_hwif_entry {
 			.ptp_off = PTP_XGMAC_OFFSET,
 			.mmc_off = MMC_XGMAC_OFFSET,
 			.est_off = EST_XGMAC_OFFSET,
+			.fpe_reg = &dwxgmac3_fpe_reg,
 		},
 		.desc = &dwxgmac210_desc_ops,
 		.dma = &dwxgmac210_dma_ops,
@@ -353,6 +359,7 @@ int stmmac_hwif_init(struct stmmac_priv *priv)
 		mac->est = mac->est ? : entry->est;
 
 		priv->hw = mac;
+		priv->fpe_cfg.reg = entry->regs.fpe_reg;
 		priv->ptpaddr = priv->ioaddr + entry->regs.ptp_off;
 		priv->mmcaddr = priv->ioaddr + entry->regs.mmc_off;
 		if (entry->est)
drivers/net/ethernet/stmicro/stmmac/hwif.h +1 -19
index d5a9f01ecac5..64f8ed67dcc4 100644
@@ -420,15 +420,6 @@ struct stmmac_ops {
 				bool en, bool udp, bool sa, bool inv,
 				u32 match);
 	void (*set_arp_offload)(struct mac_device_info *hw, bool en, u32 addr);
-	void (*fpe_configure)(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
-			      u32 num_txq, u32 num_rxq,
-			      bool tx_enable, bool pmac_enable);
-	void (*fpe_send_mpacket)(void __iomem *ioaddr,
-				 struct stmmac_fpe_cfg *cfg,
-				 enum stmmac_mpacket_type type);
-	int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
-	int (*fpe_get_add_frag_size)(const void __iomem *ioaddr);
-	void (*fpe_set_add_frag_size)(void __iomem *ioaddr, u32 add_frag_size);
 	int (*fpe_map_preemption_class)(struct net_device *ndev,
 					struct netlink_ext_ack *extack,
 					u32 pclass);
@@ -530,16 +521,6 @@ struct stmmac_ops {
 	stmmac_do_callback(__priv, mac, config_l4_filter, __args)
 #define stmmac_set_arp_offload(__priv, __args...) \
 	stmmac_do_void_callback(__priv, mac, set_arp_offload, __args)
-#define stmmac_fpe_configure(__priv, __args...) \
-	stmmac_do_void_callback(__priv, mac, fpe_configure, __args)
-#define stmmac_fpe_send_mpacket(__priv, __args...) \
-	stmmac_do_void_callback(__priv, mac, fpe_send_mpacket, __args)
-#define stmmac_fpe_irq_status(__priv, __args...) \
-	stmmac_do_callback(__priv, mac, fpe_irq_status, __args)
-#define stmmac_fpe_get_add_frag_size(__priv, __args...) \
-	stmmac_do_callback(__priv, mac, fpe_get_add_frag_size, __args)
-#define stmmac_fpe_set_add_frag_size(__priv, __args...) \
-	stmmac_do_void_callback(__priv, mac, fpe_set_add_frag_size, __args)
 #define stmmac_fpe_map_preemption_class(__priv, __args...) \
 	stmmac_do_void_callback(__priv, mac, fpe_map_preemption_class, __args)
 
@@ -678,6 +659,7 @@ struct stmmac_est_ops {
 	stmmac_do_void_callback(__priv, est, irq_status, __args)
 
 struct stmmac_regs_off {
+	const struct stmmac_fpe_reg *fpe_reg;
 	u32 ptp_off;
 	u32 mmc_off;
 	u32 est_off;
drivers/net/ethernet/stmicro/stmmac/stmmac.h +1 -0
index 816b979e72cc..1d86439b8a14 100644
@@ -152,6 +152,7 @@ struct stmmac_fpe_cfg {
 	 */
 	spinlock_t lock;
 
+	const struct stmmac_fpe_reg *reg;
 	u32 fpe_csr;				/* MAC_FPE_CTRL_STS reg cache */
 
 	enum ethtool_mm_verify_status status;
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +2 -2
index 2792a4c6cbcd..f2783f7c46f3 100644
@@ -1294,7 +1294,7 @@ static int stmmac_get_mm(struct net_device *ndev,
 	else
 		state->tx_active = false;
 
-	frag_size = stmmac_fpe_get_add_frag_size(priv, priv->ioaddr);
+	frag_size = stmmac_fpe_get_add_frag_size(priv);
 	state->tx_min_frag_size = ethtool_mm_frag_size_add_to_min(frag_size);
 
 	spin_unlock_irqrestore(&priv->fpe_cfg.lock, flags);
@@ -1329,7 +1329,7 @@ static int stmmac_set_mm(struct net_device *ndev, struct ethtool_mm_cfg *cfg,
 	if (!cfg->verify_enabled)
 		fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_DISABLED;
 
-	stmmac_fpe_set_add_frag_size(priv, priv->ioaddr, frag_size);
+	stmmac_fpe_set_add_frag_size(priv, frag_size);
 	stmmac_fpe_apply(priv);
 
 	spin_unlock_irqrestore(&fpe_cfg->lock, flags);
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +79 -65

263 lines not on this page · raw message

drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h +8 -12
index 25725fd5182f..0b601a9fd805 100644
@@ -22,24 +22,20 @@ struct stmmac_priv;
 struct stmmac_fpe_cfg;
 
 void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up);
-void stmmac_fpe_event_status(struct stmmac_priv *priv, int status);
 void stmmac_fpe_init(struct stmmac_priv *priv);
 void stmmac_fpe_apply(struct stmmac_priv *priv);
-
-void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
-			  u32 num_txq, u32 num_rxq,
+void stmmac_fpe_configure(struct stmmac_priv *priv, u32 num_txq, u32 num_rxq,
 			  bool tx_enable, bool pmac_enable);
-void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
-			     struct stmmac_fpe_cfg *cfg,
+void stmmac_fpe_send_mpacket(struct stmmac_priv *priv,
 			     enum stmmac_mpacket_type type);
-int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
-int dwmac5_fpe_get_add_frag_size(const void __iomem *ioaddr);
-void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size);
+void stmmac_fpe_irq_status(struct stmmac_priv *priv);
+int stmmac_fpe_get_add_frag_size(struct stmmac_priv *priv);
+void stmmac_fpe_set_add_frag_size(struct stmmac_priv *priv, u32 add_frag_size);
+
 int dwmac5_fpe_map_preemption_class(struct net_device *ndev,
 				    struct netlink_ext_ack *extack, u32 pclass);
 
-void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
-			    u32 num_txq, u32 num_rxq,
-			    bool tx_enable, bool pmac_enable);
+extern const struct stmmac_fpe_reg dwmac5_fpe_reg;
+extern const struct stmmac_fpe_reg dwxgmac3_fpe_reg;
 
 #endif
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +2 -6
index ab547430a717..9fcf2df099ec 100644
@@ -5943,12 +5943,8 @@ static void stmmac_common_interrupt(struct stmmac_priv *priv)
 		stmmac_est_irq_status(priv, priv, priv->dev,
 				      &priv->xstats, tx_cnt);
 
-	if (priv->dma_cap.fpesel) {
-		int status = stmmac_fpe_irq_status(priv, priv->ioaddr,
-						   priv->dev);
-
-		stmmac_fpe_event_status(priv, status);
-	}
+	if (priv->dma_cap.fpesel)
+		stmmac_fpe_irq_status(priv);
 
 	/* To handle GMAC own interrupts */
 	if ((priv->plat->has_gmac) || xmac) {
Signature · 1 line
2.34.1
#4 lore raw

Re: [PATCH net-next v5 3/6] net: stmmac: Refactor FPE functions to generic version

drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c line 46

Quoted 8 lines · Furong Xu

void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up) {

drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +3 -0
 	struct stmmac_fpe_cfg *fpe_cfg = &priv->fpe_cfg;
 	unsigned long flags;
 
+	if (!priv->dma_cap.fpesel)
+		return;
+

Minor nitpick: all call sites also have this test already.

Quoted 13 lines
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +1 -2
 	timer_shutdown_sync(&fpe_cfg->verify_timer);
 
 	spin_lock_irqsave(&fpe_cfg->lock, flags);
 
 	if (is_up && fpe_cfg->pmac_enabled) {
 		/* VERIFY process requires pmac enabled when NIC comes up */
-		stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
-				     priv->plat->tx_queues_to_use,
+		stmmac_fpe_configure(priv, priv->plat->tx_queues_to_use,
 				     priv->plat->rx_queues_to_use,
 				     false, true);

drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c void stmmac_fpe_init(struct stmmac_priv *priv) · line 168

Quoted 8 lines
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +5 -0
@@ -154,6 +161,11 @@ void stmmac_fpe_init(struct stmmac_priv *priv)
 	priv->fpe_cfg.status = ETHTOOL_MM_VERIFY_STATUS_DISABLED;
 	timer_setup(&priv->fpe_cfg.verify_timer, stmmac_fpe_verify_timer, 0);
 	spin_lock_init(&priv->fpe_cfg.lock);
+
+	if (priv->dma_cap.fpesel && !priv->fpe_cfg.reg) {
+		dev_warn(priv->device, "FPE on this MAC is not supported by driver, force disable it.\n");
+		priv->dma_cap.fpesel = 0;
+	}

Let's not change the output of stmmac_dma_cap_show() sysfs attribute if we don't have to. Who knows what depends on that. It's better to introduce stmmac_fpe_supported(), which tests for both conditions, and use it throughout (except, of course, for the sysfs, which should still print the raw DMA capability).

Which devices would those even be, which support FPE but the driver doesn't deal with them (after your XGMAC addition), do you have any idea?

Quoted 14 lines
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +1 -2
 }
 
 void stmmac_fpe_apply(struct stmmac_priv *priv)
@@ -164,8 +176,7 @@ void stmmac_fpe_apply(struct stmmac_priv *priv)
 	 * Otherwise let the timer code do it.
 	 */
 	if (!fpe_cfg->verify_enabled) {
-		stmmac_fpe_configure(priv, priv->ioaddr, fpe_cfg,
-				     priv->plat->tx_queues_to_use,
+		stmmac_fpe_configure(priv, priv->plat->tx_queues_to_use,
 				     priv->plat->rx_queues_to_use,
 				     fpe_cfg->tx_enabled,
 				     fpe_cfg->pmac_enabled);

drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c void stmmac_fpe_apply(struct stmmac_priv *priv) · line 193

Quoted 7 lines
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +1 -2
@@ -178,50 +189,54 @@ void stmmac_fpe_apply(struct stmmac_priv *priv)
 	}
 }
 
-void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
-			  u32 num_txq, u32 num_rxq,
+void stmmac_fpe_configure(struct stmmac_priv *priv, u32 num_txq, u32 num_rxq,
 			  bool tx_enable, bool pmac_enable)

num_txq? not used anywhere. num_rxq? can be retrieved from the "priv" pointer already provided.

The rest of the series looks good, I have no other comments.

author
#5 lore raw

Re: [PATCH net-next v5 3/6] net: stmmac: Refactor FPE functions to generic version

Hi Vladimir,

Quoted 5 lines · Vladimir Oltean

Let's not change the output of stmmac_dma_cap_show() sysfs attribute if we don't have to. Who knows what depends on that. It's better to introduce stmmac_fpe_supported(), which tests for both conditions, and use it throughout (except, of course, for the sysfs, which should still print the raw DMA capability).

stmmac_fpe_supported() is a better option, thanks.

Quoted 4 lines

Which devices would those even be, which support FPE but the driver doesn't deal with them (after your XGMAC addition), do you have any idea?

Well, nobody can tell that but only Synopsys, as you can see that stmmac_hwif_entry in hwif.c defines quite a few MAC cores.

Since FPE have been an optional implementation for MAC cores, so I think we should not convert FPE implementation from optional to mandatory for new MAC cores, for example, a new MAC support is pending for merge:
https://lore.kernel.org/netdev/[email protected]/

stmmac_fpe_supported() is a perfect option to handle these concerns.

author
#6 lore raw

PATCH v5 4/6 net: stmmac: xgmac: Rename XGMAC_RQ to XGMAC_FPRQ

In reply to Furong Xu

Synopsys XGMAC Databook defines MAC_RxQ_Ctrl1 register:
RQ: Frame Preemption Residue Queue

XGMAC_FPRQ is more readable and more consistent with GMAC4.

---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h   | 2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h +1 -1
index efd47db05dbc..a04a79003692 100644
@@ -84,7 +84,7 @@
 #define XGMAC_MCBCQEN			BIT(15)
 #define XGMAC_MCBCQ			GENMASK(11, 8)
 #define XGMAC_MCBCQ_SHIFT		8
-#define XGMAC_RQ			GENMASK(7, 4)
+#define XGMAC_FPRQ			GENMASK(7, 4)
 #define XGMAC_UPQ			GENMASK(3, 0)
 #define XGMAC_UPQ_SHIFT			0
 #define XGMAC_RXQ_CTRL2			0x000000a8
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +1 -1
index 05a0e1a22155..ce5dc896f9d8 100644
@@ -363,7 +363,7 @@ const struct stmmac_fpe_reg dwxgmac3_fpe_reg = {
 	.mac_fpe_reg = XGMAC_MAC_FPE_CTRL_STS,
 	.mtl_fpe_reg = XGMAC_MTL_FPE_CTRL_STS,
 	.rxq_ctrl1_reg = XGMAC_RXQ_CTRL1,
-	.fprq_mask = XGMAC_RQ,
+	.fprq_mask = XGMAC_FPRQ,
 	.int_en_reg = XGMAC_INT_EN,
 	.int_en_bit = XGMAC_FPEIE,
 };
Signature · 1 line
2.34.1
author
#7 lore raw

PATCH v5 5/6 net: stmmac: xgmac: Complete FPE support

In reply to Furong Xu

Implement the necessary fpe_map_preemption_class callback for xgmac.

---
 .../ethernet/stmicro/stmmac/dwxgmac2_core.c   |  2 +
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.c  | 43 +++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.h  |  3 ++
 3 files changed, 48 insertions(+)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +2 -0
index de6ffda31a80..9a60a6e8f633 100644
@@ -1545,6 +1545,7 @@ const struct stmmac_ops dwxgmac210_ops = {
 	.config_l3_filter = dwxgmac2_config_l3_filter,
 	.config_l4_filter = dwxgmac2_config_l4_filter,
 	.set_arp_offload = dwxgmac2_set_arp_offload,
+	.fpe_map_preemption_class = dwxgmac3_fpe_map_preemption_class,
 };
 
 static void dwxlgmac2_rx_queue_enable(struct mac_device_info *hw, u8 mode,
@@ -1601,6 +1602,7 @@ const struct stmmac_ops dwxlgmac2_ops = {
 	.config_l3_filter = dwxgmac2_config_l3_filter,
 	.config_l4_filter = dwxgmac2_config_l4_filter,
 	.set_arp_offload = dwxgmac2_set_arp_offload,
+	.fpe_map_preemption_class = dwxgmac3_fpe_map_preemption_class,
 };
 
 int dwxgmac2_setup(struct stmmac_priv *priv)
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +43 -0

49 lines not on this page · raw message

drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h +3 -0
index 0b601a9fd805..ea18ea738da6 100644
@@ -34,6 +34,9 @@ void stmmac_fpe_set_add_frag_size(struct stmmac_priv *priv, u32 add_frag_size);
 
 int dwmac5_fpe_map_preemption_class(struct net_device *ndev,
 				    struct netlink_ext_ack *extack, u32 pclass);
+int dwxgmac3_fpe_map_preemption_class(struct net_device *ndev,
+				      struct netlink_ext_ack *extack,
+				      u32 pclass);
 
 extern const struct stmmac_fpe_reg dwmac5_fpe_reg;
 extern const struct stmmac_fpe_reg dwxgmac3_fpe_reg;
Signature · 1 line
2.34.1
author
#8 lore raw

PATCH v5 6/6 net: stmmac: xgmac: Enable FPE for tc-mqprio/tc-taprio

In reply to Furong Xu

The FPE on XGMAC is ready, it is time to update dwxgmac_tc_ops to let user configure FPE via tc-mqprio/tc-taprio.

---
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +2 -2
index 75ad2da1a37f..6a79e6a111ed 100644
@@ -1290,8 +1290,8 @@ const struct stmmac_tc_ops dwxgmac_tc_ops = {
 	.setup_cls_u32 = tc_setup_cls_u32,
 	.setup_cbs = tc_setup_cbs,
 	.setup_cls = tc_setup_cls,
-	.setup_taprio = tc_setup_taprio_without_fpe,
+	.setup_taprio = tc_setup_taprio,
 	.setup_etf = tc_setup_etf,
 	.query_caps = tc_query_caps,
-	.setup_mqprio = tc_setup_mqprio_unimplemented,
+	.setup_mqprio = tc_setup_dwmac510_mqprio,
 };
Signature · 1 line
2.34.1