Skip to contentSkip to conversation

int3472: Support GPIO con_id based on _HID

PATCH Superseded Sakari Ailus 3 participants 9 messages Jan 31, 2025

Subsystems (3)

v4 of 7 Superseded Latest is v7 →

lore
Share & tools
lore

Sakari Ailus

author maintainer
#0 lore raw

v4 cover int3472: Support GPIO con_id based on _HID

Hi folks,

One patch turned into a set, the second patch being the original one.

since v3:

- Add a patch (first one) to switch to unsigned long type for polarity field and renames it as gpio_flags.

- Use a polarity_low boolean field for indicating the GPIO polarity. This is turned to gpio_flags in int3472_get_con_id_and_polarity().

- Put the new polarity_low bool field next to the u8's for better struct packing.

- Add a patch (last one) to rename "func" as "con_id" which is used throughout the GPIO framework.

Sakari Ailus (3):
platform/x86: int3472: Use correct type for "polarity", call it
gpio_flags
platform/x86: int3472: Call "reset" GPIO "enable" for INT347E platform/x86: int3472: Call "func" "con_id" instead

 drivers/platform/x86/intel/int3472/discrete.c | 98 +++++++++++++------
 1 file changed, 68 insertions(+), 30 deletions(-)
Signature · 1 line
2.39.5
author maintainer
#1 lore raw

PATCH v4 1/3 platform/x86: int3472: Use correct type for "polarity", call it gpio_flags

Struct gpiod_lookup flags field's type is unsigned long. Thus use unsigned long for values to be assigned to that field. Similarly, also call the field gpio_flags which it really is.

---
 drivers/platform/x86/intel/int3472/discrete.c | 39 ++++++++++---------
 1 file changed, 20 insertions(+), 19 deletions(-)
drivers/platform/x86/intel/int3472/discrete.c +20 -19
index d881b2cfcdfc..3f7624714869 100644
@@ -55,7 +55,7 @@ static void skl_int3472_log_sensor_module_name(struct int3472_discrete_device *i
 
 static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry,
 					 struct acpi_resource_gpio *agpio,
-					 const char *func, u32 polarity)
+					 const char *func, unsigned long gpio_flags)
 {
 	char *path = agpio->resource_source.string_ptr;
 	struct acpi_device *adev;
@@ -70,14 +70,14 @@ static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry,
 	if (!adev)
 		return -ENODEV;
 
-	*table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], func, polarity);
+	*table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], func, gpio_flags);
 
 	return 0;
 }
 
 static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472,
 					  struct acpi_resource_gpio *agpio,
-					  const char *func, u32 polarity)
+					  const char *func, unsigned long gpio_flags)
 {
 	int ret;
 
@@ -87,7 +87,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 	}
 
 	ret = skl_int3472_fill_gpiod_lookup(&int3472->gpios.table[int3472->n_sensor_gpios],
-					    agpio, func, polarity);
+					    agpio, func, gpio_flags);
 	if (ret)
 		return ret;
 
@@ -100,7 +100,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 static struct gpio_desc *
 skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 				       struct acpi_resource_gpio *agpio,
-				       const char *func, u32 polarity)
+				       const char *func, unsigned long gpio_flags)
 {
 	struct gpio_desc *desc;
 	int ret;
@@ -111,7 +111,7 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 		return ERR_PTR(-ENOMEM);
 
 	lookup->dev_id = dev_name(int3472->dev);
-	ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, func, polarity);
+	ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, func, gpio_flags);
 	if (ret)
 		return ERR_PTR(ret);
 
@@ -122,32 +122,33 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 	return desc;
 }
 
-static void int3472_get_func_and_polarity(u8 type, const char **func, u32 *polarity)
+static void int3472_get_func_and_polarity(u8 type, const char **func,
+					  unsigned long *gpio_flags)
 {
 	switch (type) {
 	case INT3472_GPIO_TYPE_RESET:
 		*func = "reset";
-		*polarity = GPIO_ACTIVE_LOW;
+		*gpio_flags = GPIO_ACTIVE_LOW;
 		break;
 	case INT3472_GPIO_TYPE_POWERDOWN:
 		*func = "powerdown";
-		*polarity = GPIO_ACTIVE_LOW;
+		*gpio_flags = GPIO_ACTIVE_LOW;
 		break;
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
 		*func = "clk-enable";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
 		*func = "privacy-led";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
 		*func = "power-enable";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	default:
 		*func = "unknown";
-		*polarity = GPIO_ACTIVE_HIGH;
+		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	}
 }
@@ -194,7 +195,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	struct gpio_desc *gpio;
 	const char *err_msg;
 	const char *func;
-	u32 polarity;
+	unsigned long gpio_flags;
 	int ret;
 
 	if (!acpi_gpio_get_io_resource(ares, &agpio))
@@ -217,7 +218,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value);
 
-	int3472_get_func_and_polarity(type, &func, &polarity);
+	int3472_get_func_and_polarity(type, &func, &gpio_flags);
 
 	pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value);
 	if (pin != agpio->pin_table[0])
@@ -227,16 +228,16 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	active_value = FIELD_GET(INT3472_GPIO_DSM_SENSOR_ON_VAL, obj->integer.value);
 	if (!active_value)
-		polarity ^= GPIO_ACTIVE_LOW;
+		gpio_flags ^= GPIO_ACTIVE_LOW;
 
 	dev_dbg(int3472->dev, "%s %s pin %d active-%s\n", func,
 		agpio->resource_source.string_ptr, agpio->pin_table[0],
-		str_high_low(polarity == GPIO_ACTIVE_HIGH));
+		str_high_low(gpio_flags == GPIO_ACTIVE_HIGH));
 
 	switch (type) {
 	case INT3472_GPIO_TYPE_RESET:
 	case INT3472_GPIO_TYPE_POWERDOWN:
-		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, func, polarity);
+		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, func, gpio_flags);
 		if (ret)
 			err_msg = "Failed to map GPIO pin to sensor\n";
 
@@ -244,7 +245,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
-		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, func, polarity);
+		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, func, gpio_flags);
 		if (IS_ERR(gpio)) {
 			ret = PTR_ERR(gpio);
 			err_msg = "Failed to get GPIO\n";
Signature · 1 line
2.39.5
author maintainer
#2 lore raw

PATCH v4 2/3 platform/x86: int3472: Call "reset" GPIO "enable" for INT347E

In reply to Sakari Ailus

The DT bindings for ov7251 specify "enable" GPIO (xshutdown in documentation) but the int3472 indiscriminately provides this as a "reset" GPIO to sensor drivers. Take this into account by assigning it as "enable" with active high polarity for INT347E devices, i.e. ov7251. "reset" with active low polarity remains the default GPIO name for other devices.

---
 drivers/platform/x86/intel/int3472/discrete.c | 45 +++++++++++++++++--
 1 file changed, 41 insertions(+), 4 deletions(-)
drivers/platform/x86/intel/int3472/discrete.c +41 -4
index 3f7624714869..3f3f50ce431c 100644
@@ -2,6 +2,7 @@
 /* Author: Dan Scally <[email protected]> */
 
 #include <linux/acpi.h>
+#include <linux/array_size.h>
 #include <linux/bitfield.h>
 #include <linux/device.h>
 #include <linux/gpio/consumer.h>
@@ -122,10 +123,46 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 	return desc;
 }
 
-static void int3472_get_func_and_polarity(u8 type, const char **func,
-					  unsigned long *gpio_flags)
+/**
+ * struct int3472_gpio_map - Map GPIOs to whatever is expected by the
+ * sensor driver (as in DT bindings)
+ * @hid: The ACPI HID of the device without the instance number e.g. INT347E
+ * @type_from: The GPIO type from ACPI ?SDT
+ * @type_to: The assigned GPIO type, typically same as @type_from
+ * @func: The function, e.g. "enable"
+ * @polarity_low: GPIO_ACTIVE_LOW true if the @polarity_low is true,
+ * GPIO_ACTIVE_HIGH otherwise
+ */
+struct int3472_gpio_map {
+	const char *hid;
+	u8 type_from;
+	u8 type_to;
+	bool polarity_low;
+	const char *func;
+};
+
+static const struct int3472_gpio_map int3472_gpio_map[] = {
+	{ "INT347E", INT3472_GPIO_TYPE_RESET, INT3472_GPIO_TYPE_RESET, false, "enable" },
+};
+
+static void int3472_get_func_and_polarity(struct acpi_device *adev, u8 *type,
+					  const char **func, unsigned long *gpio_flags)
 {
-	switch (type) {
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(int3472_gpio_map); i++) {
+		if (*type != int3472_gpio_map[i].type_from ||
+		    !acpi_dev_hid_uid_match(adev, int3472_gpio_map[i].hid, NULL))
+			continue;
+
+		*type = int3472_gpio_map[i].type_to;
+		*gpio_flags = int3472_gpio_map[i].polarity_low ?
+			GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH;
+		*func = int3472_gpio_map[i].func;
+		return;
+	}
+
+	switch (*type) {
 	case INT3472_GPIO_TYPE_RESET:
 		*func = "reset";
 		*gpio_flags = GPIO_ACTIVE_LOW;
@@ -218,7 +255,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value);
 
-	int3472_get_func_and_polarity(type, &func, &gpio_flags);
+	int3472_get_func_and_polarity(int3472->sensor, &type, &func, &gpio_flags);
 
 	pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value);
 	if (pin != agpio->pin_table[0])
Signature · 1 line
2.39.5
#3 lore raw

Re: [PATCH v4 2/3] platform/x86: int3472: Call "reset" GPIO "enable" for INT347E

Quoted 5 lines · Sakari Ailus

The DT bindings for ov7251 specify "enable" GPIO (xshutdown in documentation) but the int3472 indiscriminately provides this as a "reset" GPIO to sensor drivers. Take this into account by assigning it as "enable" with active high polarity for INT347E devices, i.e. ov7251. "reset" with active low polarity remains the default GPIO name for other devices.

...

drivers/platform/x86/intel/int3472/discrete.c skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472, · line 156

Quoted 11 lines
drivers/platform/x86/intel/int3472/discrete.c +8 -1
+static void int3472_get_func_and_polarity(struct acpi_device *adev, u8 *type,
+					  const char **func, unsigned long *gpio_flags)
 {
-	switch (type) {
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(int3472_gpio_map); i++) {
 
+		if (*type != int3472_gpio_map[i].type_from ||
+		    !acpi_dev_hid_uid_match(adev, int3472_gpio_map[i].hid, NULL))
+			continue;

I think in a split form it is easier to read and maintain:

		if (!acpi_dev_hid_uid_match(adev, int3472_gpio_map[i].hid, NULL))
			continue;

		if (*type != int3472_gpio_map[i].type_from)
			continue;

drivers/platform/x86/intel/int3472/discrete.c skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472, · line 160

Quoted 4 lines
drivers/platform/x86/intel/int3472/discrete.c +3 -0
+		*type = int3472_gpio_map[i].type_to;
 
+		*gpio_flags = int3472_gpio_map[i].polarity_low ?
+			GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH;

Still can be one line (100 characters). But in this case I have no strong preference. Up to Hans.

Quoted 3 lines
drivers/platform/x86/intel/int3472/discrete.c +3 -0
+		*func = int3472_gpio_map[i].func;
+		return;
+	}
Signature · 2 lines
With Best Regards,
Andy Shevchenko
author maintainer
#4 lore raw

Re: [PATCH v4 2/3] platform/x86: int3472: Call "reset" GPIO "enable" for INT347E

Hi Andy,

Quoted 23 lines · Andy Shevchenko
Quoted 5 lines · Sakari Ailus

The DT bindings for ov7251 specify "enable" GPIO (xshutdown in documentation) but the int3472 indiscriminately provides this as a "reset" GPIO to sensor drivers. Take this into account by assigning it as "enable" with active high polarity for INT347E devices, i.e. ov7251. "reset" with active low polarity remains the default GPIO name for other devices.

...

drivers/platform/x86/intel/int3472/discrete.c skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472, · line 156

Quoted 11 lines
drivers/platform/x86/intel/int3472/discrete.c +8 -1
+static void int3472_get_func_and_polarity(struct acpi_device *adev, u8 *type,
+					  const char **func, unsigned long *gpio_flags)
 {
-	switch (type) {
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(int3472_gpio_map); i++) {
 
+		if (*type != int3472_gpio_map[i].type_from ||
+		    !acpi_dev_hid_uid_match(adev, int3472_gpio_map[i].hid, NULL))
+			continue;

I think in a split form it is easier to read and maintain:

Quoted 5 lines
		if (!acpi_dev_hid_uid_match(adev, int3472_gpio_map[i].hid, NULL))
			continue;

		if (*type != int3472_gpio_map[i].type_from)
			continue;

Works for me, with the order reverted. I'll send v5.

Quoted 13 lines

drivers/platform/x86/intel/int3472/discrete.c skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472, · line 160

Quoted 5 lines
drivers/platform/x86/intel/int3472/discrete.c +3 -0
+		*type = int3472_gpio_map[i].type_to;
 
+		*gpio_flags = int3472_gpio_map[i].polarity_low ?
+			GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH;

Still can be one line (100 characters). But in this case I have no strong preference. Up to Hans.

Quoted 3 lines
drivers/platform/x86/intel/int3472/discrete.c +3 -0
+		*func = int3472_gpio_map[i].func;
+		return;
+	}
Signature · 3 lines
Regards,

Sakari Ailus
#5 lore raw

Re: [PATCH v4 2/3] platform/x86: int3472: Call "reset" GPIO "enable" for INT347E

Quoted 2 lines · Sakari Ailus
Quoted 1 line · Andy Shevchenko

On Fri, Jan 31, 2025 at 09:37:06AM +0200, Sakari Ailus wrote:

...

Quoted 6 lines
Quoted 6 lines

drivers/platform/x86/intel/int3472/discrete.c skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472, · line 156

Quoted 3 lines
drivers/platform/x86/intel/int3472/discrete.c +3 -0
+		if (*type != int3472_gpio_map[i].type_from ||
+		    !acpi_dev_hid_uid_match(adev, int3472_gpio_map[i].hid, NULL))
+			continue;

I think in a split form it is easier to read and maintain:

Quoted 7 lines
Quoted 5 lines
		if (!acpi_dev_hid_uid_match(adev, int3472_gpio_map[i].hid, NULL))
			continue;

		if (*type != int3472_gpio_map[i].type_from)
			continue;

Works for me, with the order reverted. I'll send v5.

Hmm... I don't think the provided order is understandable. But let's continue discussion in v5 thread.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
author maintainer
#6 lore raw

PATCH v4 3/3 platform/x86: int3472: Call "func" "con_id" instead

In reply to Sakari Ailus

"con_id" is an established variable name for the GPIO naming for drivers. Use it instead of "func" in the int3472 driver, too.

---
 drivers/platform/x86/intel/int3472/discrete.c | 48 +++++++++----------
 1 file changed, 24 insertions(+), 24 deletions(-)
drivers/platform/x86/intel/int3472/discrete.c +24 -24
index 3f3f50ce431c..4b0c72595c2b 100644
@@ -56,7 +56,7 @@ static void skl_int3472_log_sensor_module_name(struct int3472_discrete_device *i
 
 static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry,
 					 struct acpi_resource_gpio *agpio,
-					 const char *func, unsigned long gpio_flags)
+					 const char *con_id, unsigned long gpio_flags)
 {
 	char *path = agpio->resource_source.string_ptr;
 	struct acpi_device *adev;
@@ -71,14 +71,14 @@ static int skl_int3472_fill_gpiod_lookup(struct gpiod_lookup *table_entry,
 	if (!adev)
 		return -ENODEV;
 
-	*table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], func, gpio_flags);
+	*table_entry = GPIO_LOOKUP(acpi_dev_name(adev), agpio->pin_table[0], con_id, gpio_flags);
 
 	return 0;
 }
 
 static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int3472,
 					  struct acpi_resource_gpio *agpio,
-					  const char *func, unsigned long gpio_flags)
+					  const char *con_id, unsigned long gpio_flags)
 {
 	int ret;
 
@@ -88,7 +88,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 	}
 
 	ret = skl_int3472_fill_gpiod_lookup(&int3472->gpios.table[int3472->n_sensor_gpios],
-					    agpio, func, gpio_flags);
+					    agpio, con_id, gpio_flags);
 	if (ret)
 		return ret;
 
@@ -101,7 +101,7 @@ static int skl_int3472_map_gpio_to_sensor(struct int3472_discrete_device *int347
 static struct gpio_desc *
 skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 				       struct acpi_resource_gpio *agpio,
-				       const char *func, unsigned long gpio_flags)
+				       const char *con_id, unsigned long gpio_flags)
 {
 	struct gpio_desc *desc;
 	int ret;
@@ -112,12 +112,12 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
 		return ERR_PTR(-ENOMEM);
 
 	lookup->dev_id = dev_name(int3472->dev);
-	ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, func, gpio_flags);
+	ret = skl_int3472_fill_gpiod_lookup(&lookup->table[0], agpio, con_id, gpio_flags);
 	if (ret)
 		return ERR_PTR(ret);
 
 	gpiod_add_lookup_table(lookup);
-	desc = devm_gpiod_get(int3472->dev, func, GPIOD_OUT_LOW);
+	desc = devm_gpiod_get(int3472->dev, con_id, GPIOD_OUT_LOW);
 	gpiod_remove_lookup_table(lookup);
 
 	return desc;
@@ -129,7 +129,7 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
  * @hid: The ACPI HID of the device without the instance number e.g. INT347E
  * @type_from: The GPIO type from ACPI ?SDT
  * @type_to: The assigned GPIO type, typically same as @type_from
- * @func: The function, e.g. "enable"
+ * @con_id: The name of the GPIO for the device
  * @polarity_low: GPIO_ACTIVE_LOW true if the @polarity_low is true,
  * GPIO_ACTIVE_HIGH otherwise
  */
@@ -138,15 +138,15 @@ struct int3472_gpio_map {
 	u8 type_from;
 	u8 type_to;
 	bool polarity_low;
-	const char *func;
+	const char *con_id;
 };
 
 static const struct int3472_gpio_map int3472_gpio_map[] = {
 	{ "INT347E", INT3472_GPIO_TYPE_RESET, INT3472_GPIO_TYPE_RESET, false, "enable" },
 };
 
-static void int3472_get_func_and_polarity(struct acpi_device *adev, u8 *type,
-					  const char **func, unsigned long *gpio_flags)
+static void int3472_get_con_id_and_polarity(struct acpi_device *adev, u8 *type,
+					    const char **con_id, unsigned long *gpio_flags)
 {
 	unsigned int i;
 
@@ -158,33 +158,33 @@ static void int3472_get_func_and_polarity(struct acpi_device *adev, u8 *type,
 		*type = int3472_gpio_map[i].type_to;
 		*gpio_flags = int3472_gpio_map[i].polarity_low ?
 			GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH;
-		*func = int3472_gpio_map[i].func;
+		*con_id = int3472_gpio_map[i].con_id;
 		return;
 	}
 
 	switch (*type) {
 	case INT3472_GPIO_TYPE_RESET:
-		*func = "reset";
+		*con_id = "reset";
 		*gpio_flags = GPIO_ACTIVE_LOW;
 		break;
 	case INT3472_GPIO_TYPE_POWERDOWN:
-		*func = "powerdown";
+		*con_id = "powerdown";
 		*gpio_flags = GPIO_ACTIVE_LOW;
 		break;
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
-		*func = "clk-enable";
+		*con_id = "clk-enable";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
-		*func = "privacy-led";
+		*con_id = "privacy-led";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
-		*func = "power-enable";
+		*con_id = "power-enable";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	default:
-		*func = "unknown";
+		*con_id = "unknown";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	}
@@ -231,7 +231,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	union acpi_object *obj;
 	struct gpio_desc *gpio;
 	const char *err_msg;
-	const char *func;
+	const char *con_id;
 	unsigned long gpio_flags;
 	int ret;
 
@@ -255,26 +255,26 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value);
 
-	int3472_get_func_and_polarity(int3472->sensor, &type, &func, &gpio_flags);
+	int3472_get_con_id_and_polarity(int3472->sensor, &type, &con_id, &gpio_flags);
 
 	pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value);
 	if (pin != agpio->pin_table[0])
 		dev_warn(int3472->dev, "%s %s pin number mismatch _DSM %d resource %d\n",
-			 func, agpio->resource_source.string_ptr, pin,
+			 con_id, agpio->resource_source.string_ptr, pin,
 			 agpio->pin_table[0]);
 
 	active_value = FIELD_GET(INT3472_GPIO_DSM_SENSOR_ON_VAL, obj->integer.value);
 	if (!active_value)
 		gpio_flags ^= GPIO_ACTIVE_LOW;
 
-	dev_dbg(int3472->dev, "%s %s pin %d active-%s\n", func,
+	dev_dbg(int3472->dev, "%s %s pin %d active-%s\n", con_id,
 		agpio->resource_source.string_ptr, agpio->pin_table[0],
 		str_high_low(gpio_flags == GPIO_ACTIVE_HIGH));
 
 	switch (type) {
 	case INT3472_GPIO_TYPE_RESET:
 	case INT3472_GPIO_TYPE_POWERDOWN:
-		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, func, gpio_flags);
+		ret = skl_int3472_map_gpio_to_sensor(int3472, agpio, con_id, gpio_flags);
 		if (ret)
 			err_msg = "Failed to map GPIO pin to sensor\n";
 
@@ -282,7 +282,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
-		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, func, gpio_flags);
+		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, con_id, gpio_flags);
 		if (IS_ERR(gpio)) {
 			ret = PTR_ERR(gpio);
 			err_msg = "Failed to get GPIO\n";
Signature · 1 line
2.39.5
Reviewed-by on the v4 series
#7 lore raw
In reply to Sakari Ailus

Hi,

Quoted 9 lines · Sakari Ailus

Hi folks,

One patch turned into a set, the second patch being the original one.

since v3:

- Add a patch (first one) to switch to unsigned long type for polarity field and renames it as gpio_flags.

Quoted 8 lines

- Use a polarity_low boolean field for indicating the GPIO polarity. This is turned to gpio_flags in int3472_get_con_id_and_polarity().

- Put the new polarity_low bool field next to the u8's for better struct packing.

- Add a patch (last one) to rename "func" as "con_id" which is used throughout the GPIO framework.

Thanks the whole series looks good to me:

for the series.

Regards,

Hans

p.s.

Did you see my remarks about rewriting the INT3472 code to have it do all the power-sequencing itself in the "RFC: How to deal with the INT3472 handshake GPIO found on Intel IPU6 MTL?" thread ?

Reviewed-by on the v4 series
#8 lore raw
In reply to Sakari Ailus
Quoted 9 lines · Sakari Ailus

Hi folks,

One patch turned into a set, the second patch being the original one.

since v3:

- Add a patch (first one) to switch to unsigned long type for polarity field and renames it as gpio_flags.

Quoted 8 lines

- Use a polarity_low boolean field for indicating the GPIO polarity. This is turned to gpio_flags in int3472_get_con_id_and_polarity().

- Put the new polarity_low bool field next to the u8's for better struct packing.

- Add a patch (last one) to rename "func" as "con_id" which is used throughout the GPIO framework.

With a comment addressed in patch 2,

Signature · 2 lines
With Best Regards,
Andy Shevchenko