Skip to contentSkip to conversation

Add device tree for Nvidia's GB200NVL BMC

PATCH Superseded Willie Thai 4 participants 10 messages Mar 24, 2025 – Apr 1, 2025

Subsystems (4)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v4 cover Add device tree for Nvidia's GB200NVL BMC

The GB200NVL BMC is an Aspeed Ast2600 based BMC for Nvidia Blackwell GB200NVL platform. Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].

---
Changes v1 -> v2:
- Fix the SOB name [Krzysztof]
- Fix warnings from scripts/checkpatch.pl run [Krzysztof]
- Fix DTS coding style [Krzysztof]
- Move pinctrl override to the bottom [Krzysztof]
- Drop bootargs [Krzysztof]
- Follow DTS coding style and change naming for leds node [Krzysztof]
- Change flash 0 status property [Krzysztof]
- Change the phy-mode to rgmii [Andrew]
- Remove the max-speed in mac0 [Andrew]
- Put gpio line name in one line per group of 8 gpios, but keep some b/c they can exceed length limit [Paul]
Changes v2 -> v3:
- Fix missing new line [Krzysztof]
- Fix missing binding define, adding it in the patch no.1 of this patch set v3 [Krzysztof, Rob]
- Fix DTS coding style [Krzysztof]
- Modify nodes name to generic name for: i2c expander pca9546, gpio expander pca9555, power monitor lm5066i, fan controller max31790 [Krzysztof]
- Skip mac setting and wait till the delay issue in phy-mode fix from Aspeed SOC vendor side [Andrew]
- Remove i2c-scl-clk-low-timeout-us which is Apseed proprietary property [Mars]
Changes v3 -> v4:
- Order binding patch first in the patch set [Andrew Jeffery]
- Make the commit message more concise [Krzysztof]
- Remove stray blank lines [Krzysztof]
- Remove unnecessary comments [Krzysztof]
- Remove underscore, repalce by dash symbol in node name [Krzysztof]
- Remove disable-master property in i2c as it is downstream added property [Rob, Andrew Jeffery]
- Remove #address-cells, #size-cells in nxp,pca9555 and maxim,max31790 as they are no longer defined [Rob, Andrew Jeffery]
---

Willie Thai (3):
dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
dt-bindings: pinctrl: aspeed,ast2600-pinctrl
ARM: dts: aspeed: Add device tree for Nvidia's GB200NVL BMC

 .../bindings/arm/aspeed/aspeed.yaml           |    1 +
 .../pinctrl/aspeed,ast2600-pinctrl.yaml       |    1 +
 arch/arm/boot/dts/aspeed/Makefile             |    1 +
 .../aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 1149 +++++++++++++++++
 4 files changed, 1152 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
Signature · 1 line
2.25.1
#1 lore raw

PATCH v4 1/3 dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC

Add Nvidia's GB200NVL BMC board compatible.

---
Changes v3 -> v4:
- Make the commit message more concise [Krzysztof]
---

---
 Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +1 -0
index 01333ac111fb..a3736f134130 100644
@@ -98,6 +98,7 @@ properties:
               - inventec,starscream-bmc
               - inventec,transformer-bmc
               - jabil,rbp-bmc
+              - nvidia,gb200nvl-bmc
               - qcom,dc-scm-v1-bmc
               - quanta,s6q-bmc
               - ufispace,ncplite-bmc
Signature · 1 line
2.25.1
#3 lore raw

PATCH v4 2/3 dt-bindings: pinctrl: aspeed,ast2600-pinctrl

In reply to Willie Thai

Add EMMCG5 enum to compatible list of pinctrl binding for emmc enabling.

Cc Andrew Jeffery <[email protected]>
---
 .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml      | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +1 -0
index 80974c46f3ef..cb75e979f5e0 100644
@@ -276,6 +276,7 @@ additionalProperties:
         - BMCINT
         - EMMCG1
         - EMMCG4
+        - EMMCG5
         - EMMCG8
         - ESPI
         - ESPIALT
Signature · 1 line
2.25.1
maintainer
#5 lore raw

Re: [PATCH v4 2/3] dt-bindings: pinctrl: aspeed,ast2600-pinctrl

In reply to Willie Thai
Quoted 21 lines · Willie Thai

Add EMMCG5 enum to compatible list of pinctrl binding for emmc enabling.

Cc Andrew Jeffery <[email protected]>

---
 .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml      | 1 +

 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600- pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600- pinctrl.yaml
index 80974c46f3ef..cb75e979f5e0 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600- pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600- pinctrl.yaml

(quoted diff) +0 -0
@@ -276,6 +276,7 @@ additionalProperties:
Quoted 4 lines

         - BMCINT
         - EMMCG1
         - EMMCG4
+        - EMMCG5

What pin configuration does this correspond to for the eMMC controller? These groups aren't arbitrary, they correspond to the 1, 4 and 8-bit bus modes.

You may have added this squash a warning, but I suspect the pinctrl configuration in your devicetree is incorrect.

Andrew

Quoted 3 lines

         - EMMCG8
         - ESPI
         - ESPIALT

#6 lore raw

Re: Re: [PATCH v4 2/3] dt-bindings: pinctrl: aspeed,ast2600-pinctrl

Quoted 30 lines
Quoted 21 lines

Add EMMCG5 enum to compatible list of pinctrl binding for emmc enabling.

Cc Andrew Jeffery <[email protected]>
---
 .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml      | 1
+
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600- pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600- pinctrl.yaml
index 80974c46f3ef..cb75e979f5e0 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600- pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600- pinctrl.yaml

Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml additionalProperties: · line 279

Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +1 -0
@@ -276,6 +276,7 @@ additionalProperties:
         - BMCINT
         - EMMCG1
         - EMMCG4
+        - EMMCG5

What pin configuration does this correspond to for the eMMC controller? These groups aren't arbitrary, they correspond to the 1, 4 and 8-bit bus modes.

Quoted 5 lines

You may have added this squash a warning, but I suspect the pinctrl configuration in your devicetree is incorrect.

Andrew

Thanks for your feedback !
We want to exclude AC5 pin in the default EMMCG4 pin group, because that pin is used for other purpose. We define a new group called EMMCG5 as:
GROUP_DECL(EMMCG5, AB4, AA4, AC4, AA5, Y5, AB5, AB6)
The bus mode is still 4-bit mode.
Could you please advise if we can use the name "EMMCG5" ?

Quoted 2 lines
Quoted 2 lines
Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +0 -0
         - EMMCG8
         - ESPI
maintainer
#7 lore raw

Re: Re: [PATCH v4 2/3] dt-bindings: pinctrl: aspeed,ast2600-pinctrl

Hi Willie,

Quoted 36 lines · Willie Thai
Quoted 36 lines
Quoted 22 lines

Add EMMCG5 enum to compatible list of pinctrl binding for emmc enabling.

Cc Andrew Jeffery <[email protected]>

---
 .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 1
+

 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600- pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600- pinctrl.yaml
index 80974c46f3ef..cb75e979f5e0 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600- pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600- pinctrl.yaml

(quoted diff) +0 -0
@@ -276,6 +276,7 @@ additionalProperties:
Quoted 4 lines

         - BMCINT
         - EMMCG1
         - EMMCG4
+        - EMMCG5

What pin configuration does this correspond to for the eMMC controller?
These groups aren't arbitrary, they correspond to the 1, 4 and 8- bit
bus modes.

You may have added this squash a warning, but I suspect the pinctrl configuration in your devicetree is incorrect.

Quoted 6 lines
Quoted 2 lines

Andrew

Thanks for your feedback !
We want to exclude AC5 pin in the default EMMCG4 pin group, because that pin is used for other purpose.

Okay, sure.

Quoted 4 lines

We define a new group called EMMCG5 as:
GROUP_DECL(EMMCG5, AB4, AA4, AC4, AA5, Y5, AB5, AB6) The bus mode is still 4-bit mode.
Could you please advise if we can use the name "EMMCG5" ?

Why is EMMCG5 an intuitive name? It doesn't make sense to me for what you're trying to achieve. It's probably better if we rethink the functions and groups to make them a little more fine-grained, perhaps

- EMMCDAT1
- EMMCDAT4
- EMMCDAT8
- EMMCWP
- EMMCCD

and then you request what's appropriate, rather than create groups that exclude a specific function/pin (such as card detect).

Maybe you should drop the eMMC node from your devicetree for now, and add it back once we've sorted out the pinctrl side of things in a separate series.

Andrew

#8 lore raw

PATCH v4 3/3 ARM: dts: aspeed: Add device tree for Nvidia's GB200NVL BMC

In reply to Willie Thai

The GB200NVL BMC is an Aspeed Ast2600 based BMC for Nvidia Blackwell GB200NVL platform. Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].

---
Changes v3 -> v4:
- Remove stray blank lines [Krzysztof]
- Remove unnecessary comments [Krzysztof]
- Remove underscore, repalce by dash symbol in node name [Krzysztof]
- Remove disable-master property in i2c as it is downstream added property [Rob, Andrew Jeffery]
- Remove #address-cells, #size-cells in nxp,pca9555 and maxim,max31790 as they are no longer defined [Rob, Andrew Jeffery]
---

---
 arch/arm/boot/dts/aspeed/Makefile             |    1 +
 .../aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 1149 +++++++++++++++++
 2 files changed, 1150 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
arch/arm/boot/dts/aspeed/Makefile +1 -0
index 2e5f4833a073..20fd357a1ee9 100644
@@ -50,6 +50,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-lenovo-hr630.dtb \
 	aspeed-bmc-lenovo-hr855xg2.dtb \
 	aspeed-bmc-microsoft-olympus.dtb \
+	aspeed-bmc-nvidia-gb200nvl-bmc.dtb \
 	aspeed-bmc-opp-lanyang.dtb \
 	aspeed-bmc-opp-mowgli.dtb \
 	aspeed-bmc-opp-nicole.dtb \
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts new file +1149 -0

1,149 lines not on this page · raw message

Signature · 1 line
2.25.1
#9 lore raw
In reply to Willie Thai
Quoted 56 lines · Willie Thai

The GB200NVL BMC is an Aspeed Ast2600 based BMC for Nvidia Blackwell GB200NVL platform. Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].

---
Changes v1 -> v2:
- Fix the SOB name [Krzysztof]
- Fix warnings from scripts/checkpatch.pl run [Krzysztof]
- Fix DTS coding style [Krzysztof]
- Move pinctrl override to the bottom [Krzysztof]
- Drop bootargs [Krzysztof]
- Follow DTS coding style and change naming for leds node [Krzysztof]
- Change flash 0 status property [Krzysztof]
- Change the phy-mode to rgmii [Andrew]
- Remove the max-speed in mac0 [Andrew]
- Put gpio line name in one line per group of 8 gpios, but keep some b/c they can exceed length limit [Paul]
Changes v2 -> v3:
- Fix missing new line [Krzysztof]
- Fix missing binding define, adding it in the patch no.1 of this patch set v3 [Krzysztof, Rob]
- Fix DTS coding style [Krzysztof]
- Modify nodes name to generic name for: i2c expander pca9546, gpio expander pca9555, power monitor lm5066i, fan controller max31790 [Krzysztof]
- Skip mac setting and wait till the delay issue in phy-mode fix from Aspeed SOC vendor side [Andrew]
- Remove i2c-scl-clk-low-timeout-us which is Apseed proprietary property [Mars]
Changes v3 -> v4:
- Order binding patch first in the patch set [Andrew Jeffery]
- Make the commit message more concise [Krzysztof]
- Remove stray blank lines [Krzysztof]
- Remove unnecessary comments [Krzysztof]
- Remove underscore, repalce by dash symbol in node name [Krzysztof]
- Remove disable-master property in i2c as it is downstream added property [Rob, Andrew Jeffery]
- Remove #address-cells, #size-cells in nxp,pca9555 and maxim,max31790 as they are no longer defined [Rob, Andrew Jeffery]
---

Willie Thai (3):
dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
dt-bindings: pinctrl: aspeed,ast2600-pinctrl
ARM: dts: aspeed: Add device tree for Nvidia's GB200NVL BMC

 .../bindings/arm/aspeed/aspeed.yaml           |    1 +
 .../pinctrl/aspeed,ast2600-pinctrl.yaml       |    1 +
 arch/arm/boot/dts/aspeed/Makefile             |    1 +
 .../aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 1149 +++++++++++++++++
 4 files changed, 1152 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
Quoted 5 lines

--
2.25.1

My bot found new DTB warnings on the .dts files added or changed in this series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date:

  pip3 install dtschema --upgrade

New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for [email protected]:

arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: syscon@1e6e2000: 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/interrupt-controller@560: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic0'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/interrupt-controller@570: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic1'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e6e0000/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: adc@1e6e9000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: adc@1e6e9100: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: crypto@1e6fa000: 'aspeed,ahbc' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: sdc@1e740000: sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: sdc@1e740000: sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e780000/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: lpc@1e789000: lpc-snoop@80: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: lpc@1e789000: reg-io-width: 4 is not of type 'object'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: kcs@24: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: kcs@28: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: kcs@2c: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: kcs@114: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e780000/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e780000/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: fsi@1e79b000: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e790000/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: fsi@1e79b100: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e790000/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e790000/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']