Add device tree for Nvidia's GB200NVL BMC
v4 cover Add device tree for Nvidia's GB200NVL BMC
The GB200NVL BMC is an Aspeed Ast2600 based BMC for Nvidia Blackwell GB200NVL platform. Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].
---
Changes v1 -> v2:
- Fix the SOB name [Krzysztof]
- Fix warnings from scripts/checkpatch.pl run [Krzysztof]
- Fix DTS coding style [Krzysztof]
- Move pinctrl override to the bottom [Krzysztof]
- Drop bootargs [Krzysztof]
- Follow DTS coding style and change naming for leds node [Krzysztof]
- Change flash 0 status property [Krzysztof]
- Change the phy-mode to rgmii [Andrew]
- Remove the max-speed in mac0 [Andrew]
- Put gpio line name in one line per group of 8 gpios, but keep some b/c they can exceed length limit [Paul]
Changes v2 -> v3:
- Fix missing new line [Krzysztof]
- Fix missing binding define, adding it in the patch no.1 of this patch set v3 [Krzysztof, Rob]
- Fix DTS coding style [Krzysztof]
- Modify nodes name to generic name for: i2c expander pca9546, gpio expander pca9555, power monitor lm5066i, fan controller max31790 [Krzysztof]
- Skip mac setting and wait till the delay issue in phy-mode fix from Aspeed SOC vendor side [Andrew]
- Remove i2c-scl-clk-low-timeout-us which is Apseed proprietary property [Mars]
Changes v3 -> v4:
- Order binding patch first in the patch set [Andrew Jeffery]
- Make the commit message more concise [Krzysztof]
- Remove stray blank lines [Krzysztof]
- Remove unnecessary comments [Krzysztof]
- Remove underscore, repalce by dash symbol in node name [Krzysztof]
- Remove disable-master property in i2c as it is downstream added property [Rob, Andrew Jeffery]
- Remove #address-cells, #size-cells in nxp,pca9555 and maxim,max31790 as they are no longer defined [Rob, Andrew Jeffery]
---
Willie Thai (3):
dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
dt-bindings: pinctrl: aspeed,ast2600-pinctrl
ARM: dts: aspeed: Add device tree for Nvidia's GB200NVL BMC
.../bindings/arm/aspeed/aspeed.yaml | 1 + .../pinctrl/aspeed,ast2600-pinctrl.yaml | 1 + arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 1149 +++++++++++++++++ 4 files changed, 1152 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
Signature · 1 line
2.25.1
PATCH v4 1/3 dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
Add Nvidia's GB200NVL BMC board compatible.
---
Changes v3 -> v4:
- Make the commit message more concise [Krzysztof]
---
--- Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +1 -0
@@ -98,6 +98,7 @@ properties: - inventec,starscream-bmc - inventec,transformer-bmc - jabil,rbp-bmc + - nvidia,gb200nvl-bmc - qcom,dc-scm-v1-bmc - quanta,s6q-bmc - ufispace,ncplite-bmc
Signature · 1 line
2.25.1
Re: [PATCH v4 1/3] dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
Quoted 7 lines · Willie Thai
Add Nvidia's GB200NVL BMC board compatible.
Co-developed-by Mars Yang <[email protected]>Signed-off-by Mars Yang <[email protected]>Cc Krzysztof Kozlowski <[email protected]>Signed-off-by Willie Thai <[email protected]>---
Best regards,
Krzysztof
PATCH v4 2/3 dt-bindings: pinctrl: aspeed,ast2600-pinctrl
In reply to Willie ThaiAdd EMMCG5 enum to compatible list of pinctrl binding for emmc enabling.
--- .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +1 -0
@@ -276,6 +276,7 @@ additionalProperties: - BMCINT - EMMCG1 - EMMCG4 + - EMMCG5 - EMMCG8 - ESPI - ESPIALT
Signature · 1 line
2.25.1
Re: [PATCH v4 2/3] dt-bindings: pinctrl: aspeed,ast2600-pinctrl
Quoted 5 lines · Willie Thai
Add EMMCG5 enum to compatible list of pinctrl binding for emmc enabling.
Cc Andrew Jeffery <[email protected]>Signed-off-by Willie Thai <[email protected]>---
Best regards,
Krzysztof
Andrew Jeffery
maintainerRe: [PATCH v4 2/3] dt-bindings: pinctrl: aspeed,ast2600-pinctrl
In reply to Willie ThaiQuoted 21 lines · Willie Thai
Add EMMCG5 enum to compatible list of pinctrl binding for emmc enabling.
Cc Andrew Jeffery <[email protected]>Signed-off-by Willie Thai <[email protected]>---
.../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 1 +1 file changed, 1 insertion(+)diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-
pinctrl.yamlb/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index80974c46f3ef..cb75e979f5e0100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml(quoted diff) +0
-0@@ -276,6 +276,7 @@ additionalProperties:
Quoted 4 lines
- BMCINT
- EMMCG1
- EMMCG4
+ - EMMCG5
What pin configuration does this correspond to for the eMMC controller? These groups aren't arbitrary, they correspond to the 1, 4 and 8-bit bus modes.
You may have added this squash a warning, but I suspect the pinctrl configuration in your devicetree is incorrect.
Andrew
Quoted 3 lines
- EMMCG8
- ESPI
- ESPIALT
Re: Re: [PATCH v4 2/3] dt-bindings: pinctrl: aspeed,ast2600-pinctrl
Quoted 30 lines
Quoted 21 lines
Add EMMCG5 enum to compatible list of pinctrl binding for emmc enabling.
Cc Andrew Jeffery <[email protected]>Signed-off-by Willie Thai <[email protected]>--- .../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 1 + 1 file changed, 1 insertion(+)diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-
pinctrl.yamlb/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index80974c46f3ef..cb75e979f5e0100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yamlDocumentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml additionalProperties: · line 279
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +1
-0@@ -276,6 +276,7 @@ additionalProperties: - BMCINT - EMMCG1 - EMMCG4 + - EMMCG5What pin configuration does this correspond to for the eMMC controller? These groups aren't arbitrary, they correspond to the 1, 4 and 8-bit bus modes.
Quoted 5 lines
You may have added this squash a warning, but I suspect the pinctrl configuration in your devicetree is incorrect.
Andrew
Thanks for your feedback !
We want to exclude AC5 pin in the default EMMCG4 pin group, because that pin is used for other purpose. We define a new group called EMMCG5 as:GROUP_DECL(EMMCG5, AB4, AA4, AC4, AA5, Y5, AB5, AB6)
The bus mode is still 4-bit mode.
Could you please advise if we can use the name "EMMCG5" ?
Quoted 2 lines
Quoted 2 lines
Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +0
-0- EMMCG8 - ESPI
Andrew Jeffery
maintainerRe: Re: [PATCH v4 2/3] dt-bindings: pinctrl: aspeed,ast2600-pinctrl
Hi Willie,
Quoted 36 lines · Willie Thai
Quoted 36 lines
Quoted 22 lines
Add EMMCG5 enum to compatible list of pinctrl binding for emmc enabling.
Cc Andrew Jeffery <[email protected]>Signed-off-by Willie Thai <[email protected]>---
.../devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml | 1
+1 file changed, 1 insertion(+)diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-
pinctrl.yamlb/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index80974c46f3ef..cb75e979f5e0100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml(quoted diff) +0
-0@@ -276,6 +276,7 @@ additionalProperties:Quoted 4 lines
- BMCINT
- EMMCG1
- EMMCG4
+ - EMMCG5What pin configuration does this correspond to for the eMMC controller?
These groups aren't arbitrary, they correspond to the 1, 4 and 8- bit
bus modes.You may have added this squash a warning, but I suspect the pinctrl configuration in your devicetree is incorrect.
Quoted 6 lines
Quoted 2 lines
Andrew
Thanks for your feedback !
We want to exclude AC5 pin in the default EMMCG4 pin group, because that pin is used for other purpose.
Okay, sure.
Quoted 4 lines
We define a new group called EMMCG5 as:
GROUP_DECL(EMMCG5, AB4, AA4, AC4, AA5, Y5, AB5, AB6)The bus mode is still 4-bit mode.
Could you please advise if we can use the name "EMMCG5" ?
Why is EMMCG5 an intuitive name? It doesn't make sense to me for what you're trying to achieve. It's probably better if we rethink the functions and groups to make them a little more fine-grained, perhaps
- EMMCDAT1
- EMMCDAT4
- EMMCDAT8
- EMMCWP
- EMMCCD
and then you request what's appropriate, rather than create groups that exclude a specific function/pin (such as card detect).
Maybe you should drop the eMMC node from your devicetree for now, and add it back once we've sorted out the pinctrl side of things in a separate series.
Andrew
PATCH v4 3/3 ARM: dts: aspeed: Add device tree for Nvidia's GB200NVL BMC
In reply to Willie ThaiThe GB200NVL BMC is an Aspeed Ast2600 based BMC for Nvidia Blackwell GB200NVL platform. Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].
---
Changes v3 -> v4:
- Remove stray blank lines [Krzysztof]
- Remove unnecessary comments [Krzysztof]
- Remove underscore, repalce by dash symbol in node name [Krzysztof]
- Remove disable-master property in i2c as it is downstream added property [Rob, Andrew Jeffery]
- Remove #address-cells, #size-cells in nxp,pca9555 and maxim,max31790 as they are no longer defined [Rob, Andrew Jeffery]
---
--- arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 1149 +++++++++++++++++ 2 files changed, 1150 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
arch/arm/boot/dts/aspeed/Makefile +1 -0
@@ -50,6 +50,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-lenovo-hr630.dtb \ aspeed-bmc-lenovo-hr855xg2.dtb \ aspeed-bmc-microsoft-olympus.dtb \ + aspeed-bmc-nvidia-gb200nvl-bmc.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mowgli.dtb \ aspeed-bmc-opp-nicole.dtb \
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts new file +1149 -0
1,149 lines not on this page · raw message
Signature · 1 line
2.25.1
Rob Herring (Arm)
maintainerQuoted 56 lines · Willie Thai
The GB200NVL BMC is an Aspeed Ast2600 based BMC for Nvidia Blackwell GB200NVL platform. Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].Co-developed-by Mars Yang <[email protected]>Signed-off-by Mars Yang <[email protected]>Cc Krzysztof Kozlowski <[email protected]>Cc Andrew Lunn <[email protected]>Cc Rob Herring <[email protected]>Cc Paul Menzel <[email protected]>Reviewed-by Andrew Lunn <[email protected]>Signed-off-by Willie Thai <[email protected]>---
Changes v1 -> v2:
- Fix the SOB name [Krzysztof]
- Fix warnings fromscripts/checkpatch.plrun [Krzysztof]
- Fix DTS coding style [Krzysztof]
- Move pinctrl override to the bottom [Krzysztof]
- Drop bootargs [Krzysztof]
- Follow DTS coding style and change naming for leds node [Krzysztof]
- Change flash 0 status property [Krzysztof]
- Change the phy-mode to rgmii [Andrew]
- Remove the max-speed in mac0 [Andrew]
- Put gpio line name in one line per group of 8 gpios, but keep some b/c they can exceed length limit [Paul]
Changes v2 -> v3:
- Fix missing new line [Krzysztof]
- Fix missing binding define, adding it in the patch no.1 of this patch set v3 [Krzysztof, Rob]
- Fix DTS coding style [Krzysztof]
- Modify nodes name to generic name for: i2c expander pca9546, gpio expander pca9555, power monitor lm5066i, fan controller max31790 [Krzysztof]
- Skip mac setting and wait till the delay issue in phy-mode fix from Aspeed SOC vendor side [Andrew]
- Remove i2c-scl-clk-low-timeout-us which is Apseed proprietary property [Mars]
Changes v3 -> v4:
- Order binding patch first in the patch set [Andrew Jeffery]
- Make the commit message more concise [Krzysztof]
- Remove stray blank lines [Krzysztof]
- Remove unnecessary comments [Krzysztof]
- Remove underscore, repalce by dash symbol in node name [Krzysztof]
- Remove disable-master property in i2c as it is downstream added property [Rob, Andrew Jeffery]
- Remove #address-cells, #size-cells in nxp,pca9555 and maxim,max31790 as they are no longer defined [Rob, Andrew Jeffery]
---Willie Thai (3):
dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
dt-bindings: pinctrl: aspeed,ast2600-pinctrl
ARM: dts: aspeed: Add device tree for Nvidia's GB200NVL BMC.../bindings/arm/aspeed/aspeed.yaml | 1 + .../pinctrl/aspeed,ast2600-pinctrl.yaml | 1 + arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 1149 +++++++++++++++++ 4 files changed, 1152 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
Quoted 5 lines
--
2.25.1
My bot found new DTB warnings on the .dts files added or changed in this series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for [email protected]:
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: syscon@1e6e2000: 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/interrupt-controller@560: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic0'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e6e0000/syscon@1e6e2000/interrupt-controller@570: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic1'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e6e0000/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: adc@1e6e9000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: adc@1e6e9100: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: crypto@1e6fa000: 'aspeed,ahbc' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: sdc@1e740000: sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: sdc@1e740000: sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e780000/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: lpc@1e789000: lpc-snoop@80: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: lpc@1e789000: reg-io-width: 4 is not of type 'object'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: kcs@24: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: kcs@28: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: kcs@2c: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: kcs@114: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e780000/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e780000/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: fsi@1e79b000: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e790000/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: fsi@1e79b100: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e790000/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dtb: /ahb/apb@1e790000/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']