Skip to content

Add device tree for Nvidia's GB200NVL BMC

Willie Thai linux-arm-kernel linux-aspeed linux-devicetree linux-hardening lkml openbmc 8 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest2 patches 4 repliesIn review
  2. v43 patches 6 repliesSuperseded
  3. v3 posting 2/22 patches 7 repliesSuperseded
Earlier versions · 5
VersionPostedPatchesRepliesStatus
v2 posting 3/31 patch0 repliesSuperseded
v2 posting 2/31 patch1 replySuperseded
v3 posting 1/21 patch0 repliesSuperseded
v2 posting 1/31 patch3 repliesSuperseded
v11 patch3 repliesSuperseded

Changes in v5 from the cover letter

- Drop emmc node for now as it requires specific pin configuration [Andrew Jeffery]
---

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMCDocumentation/devicetree/bindings/arm/aspeed/aspeed.yaml+1 -04 replies
2/2ARM: dts: aspeed: Add device tree for Nvidia's GB200NVL BMCarch/arm/boot/dts/aspeed/Makefile arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts+1129 -00 replies

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchKrzysztof KozlowskiAndrew Lunn
SeriesA-b R-b
1/2A-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [PATCH v5 0/2] Add device tree for Nvidia's GB200NVL BMC

The GB200NVL BMC is an Aspeed Ast2600 based BMC for Nvidia Blackwell GB200NVL platform. Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].

---
Changes v1 -> v2:
- Fix the SOB name [Krzysztof]
- Fix warnings from scripts/checkpatch.pl run [Krzysztof]
- Fix DTS coding style [Krzysztof]
- Move pinctrl override to the bottom [Krzysztof]
- Drop bootargs [Krzysztof]
- Follow DTS coding style and change naming for leds node [Krzysztof]
- Change flash 0 status property [Krzysztof]
- Change the phy-mode to rgmii [Andrew]
- Remove the max-speed in mac0 [Andrew]
- Put gpio line name in one line per group of 8 gpios, but keep some b/c they can exceed length limit [Paul]
Changes v2 -> v3:
- Fix missing new line [Krzysztof]
- Fix missing binding define, adding it in the patch no.1 of this patch set v3 [Krzysztof, Rob]
- Fix DTS coding style [Krzysztof]
- Modify nodes name to generic name for: i2c expander pca9546, gpio expander pca9555, power monitor lm5066i, fan controller max31790 [Krzysztof]
- Skip mac setting and wait till the delay issue in phy-mode fix from Aspeed SOC vendor side [Andrew]
- Remove i2c-scl-clk-low-timeout-us which is Apseed proprietary property [Mars]
Changes v3 -> v4:
- Order binding patch first in the patch set [Andrew Jeffery]
- Make the commit message more concise [Krzysztof]
- Remove stray blank lines [Krzysztof]
- Remove unnecessary comments [Krzysztof]
- Remove underscore, repalce by dash symbol in node name [Krzysztof]
- Remove disable-master property in i2c as it is downstream added property [Rob, Andrew Jeffery]
- Remove #address-cells, #size-cells in nxp,pca9555 and maxim,max31790 as they are no longer defined [Rob, Andrew Jeffery]
Changes v4 -> v5:
- Drop emmc node for now as it requires specific pin configuration [Andrew Jeffery]
---

Willie Thai (2):
dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
ARM: dts: aspeed: Add device tree for Nvidia's GB200NVL BMC

 .../bindings/arm/aspeed/aspeed.yaml           |    1 +
 arch/arm/boot/dts/aspeed/Makefile             |    1 +
 .../aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 1128 +++++++++++++++++
 3 files changed, 1130 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
Signature · 1 line
2.25.1