Add device tree for Nvidia's GB200NVL BMC
Subsystems (2)
v5 cover Add device tree for Nvidia's GB200NVL BMC
The GB200NVL BMC is an Aspeed Ast2600 based BMC for Nvidia Blackwell GB200NVL platform. Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].
---
Changes v1 -> v2:
- Fix the SOB name [Krzysztof]
- Fix warnings from scripts/checkpatch.pl run [Krzysztof]
- Fix DTS coding style [Krzysztof]
- Move pinctrl override to the bottom [Krzysztof]
- Drop bootargs [Krzysztof]
- Follow DTS coding style and change naming for leds node [Krzysztof]
- Change flash 0 status property [Krzysztof]
- Change the phy-mode to rgmii [Andrew]
- Remove the max-speed in mac0 [Andrew]
- Put gpio line name in one line per group of 8 gpios, but keep some b/c they can exceed length limit [Paul]
Changes v2 -> v3:
- Fix missing new line [Krzysztof]
- Fix missing binding define, adding it in the patch no.1 of this patch set v3 [Krzysztof, Rob]
- Fix DTS coding style [Krzysztof]
- Modify nodes name to generic name for: i2c expander pca9546, gpio expander pca9555, power monitor lm5066i, fan controller max31790 [Krzysztof]
- Skip mac setting and wait till the delay issue in phy-mode fix from Aspeed SOC vendor side [Andrew]
- Remove i2c-scl-clk-low-timeout-us which is Apseed proprietary property [Mars]
Changes v3 -> v4:
- Order binding patch first in the patch set [Andrew Jeffery]
- Make the commit message more concise [Krzysztof]
- Remove stray blank lines [Krzysztof]
- Remove unnecessary comments [Krzysztof]
- Remove underscore, repalce by dash symbol in node name [Krzysztof]
- Remove disable-master property in i2c as it is downstream added property [Rob, Andrew Jeffery]
- Remove #address-cells, #size-cells in nxp,pca9555 and maxim,max31790 as they are no longer defined [Rob, Andrew Jeffery]
Changes v4 -> v5:
- Drop emmc node for now as it requires specific pin configuration [Andrew Jeffery]
---
Willie Thai (2):
dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
ARM: dts: aspeed: Add device tree for Nvidia's GB200NVL BMC
.../bindings/arm/aspeed/aspeed.yaml | 1 + arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 1128 +++++++++++++++++ 3 files changed, 1130 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
Signature · 1 line
2.25.1
PATCH v5 1/2 dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
Add Nvidia's GB200NVL BMC board compatible.
--- Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +1 -0
@@ -98,6 +98,7 @@ properties: - inventec,starscream-bmc - inventec,transformer-bmc - jabil,rbp-bmc + - nvidia,gb200nvl-bmc - qcom,dc-scm-v1-bmc - quanta,s6q-bmc - ufispace,ncplite-bmc
Signature · 1 line
2.25.1
Re: [PATCH v5 1/2] dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
Quoted 5 lines · Willie Thai
Add Nvidia's GB200NVL BMC board compatible.
Co-developed-by Mars Yang <[email protected]>Signed-off-by Mars Yang <[email protected]>
Why are you faking tags/email addresses? Read carefully submitting patches. I really suggest using b4 instead of manually editing things. And if you decide for manual way, you must never, *never* edit people's tag. You can only copy and paste it.
Best regards,
Krzysztof
Re: [PATCH v5 1/2] dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
Quoted 10 lines · Willie Thai
Quoted 5 lines
Add Nvidia's GB200NVL BMC board compatible.
Co-developed-by Mars Yang <[email protected]>Signed-off-by Mars Yang <[email protected]>Why are you faking tags/email addresses? Read carefully submitting patches. I really suggest using b4 instead of manually editing things. And if you decide for manual way, you must never, *never* edit people's tag. You can only copy and paste it.
Thanks for the quick response, this is not faking tags/email address, I should have copied your whole ack tag.
Andrew Jeffery
maintainerRe: [PATCH v5 1/2] dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
In reply to Krzysztof KozlowskiQuoted 7 lines · Krzysztof Kozlowski
Quoted 5 lines · Willie Thai
Add Nvidia's GB200NVL BMC board compatible.
Co-developed-by Mars Yang <[email protected]>Signed-off-by Mars Yang <[email protected]>
Quoted 6 lines
Why are you faking tags/email addresses? Read carefully submitting patches. I really suggest using b4 instead of manually editing things.
And if you decide for manual way, you must never, *never* edit people's
tag. You can only copy and paste it.
I've applied the series, fixing the tag in the process, along with the line-wrapping of the commit message in the second patch.
Willie: scripts/checkpatch.pl warns of some of these things. Please make sure to use it in the future, or if you adopt b4 as Krzysztof suggests, use b4 prep --check.
Andrew
Re: [PATCH v5 1/2] dt-bindings: arm: aspeed: add Nvidia's GB200NVL BMC
Quoted 15 lines · Krzysztof Kozlowski
Quoted 7 lines · Willie Thai
Quoted 5 lines
Add Nvidia's GB200NVL BMC board compatible.
Co-developed-by Mars Yang <[email protected]>Signed-off-by Mars Yang <[email protected]>Quoted 6 lines
Why are you faking tags/email addresses? Read carefully submitting patches. I really suggest using b4 instead of manually editing things.
And if you decide for manual way, you must never, *never* edit people's
tag. You can only copy and paste it.
Quoted 6 lines
I've applied the series, fixing the tag in the process, along with the line-wrapping of the commit message in the second patch.
Willie:
scripts/checkpatch.plwarns of some of these things. Please make sure to use it in the future, or if you adopt b4 as Krzysztof suggests, useb4 prep --check.
Thanks Andrew !
PATCH v5 2/2 ARM: dts: aspeed: Add device tree for Nvidia's GB200NVL BMC
In reply to Willie ThaiThe GB200NVL BMC is an Aspeed Ast2600 based BMC for Nvidia Blackwell GB200NVL platform. Reference to Ast2600 SOC [1].
Reference to Blackwell GB200NVL Platform [2].
---
Changes v4 -> v5:
- Drop emmc node for now as it requires specific pin configuration [Andrew Jeffery]
---
--- arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts | 1128 +++++++++++++++++ 2 files changed, 1129 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
arch/arm/boot/dts/aspeed/Makefile +1 -0
@@ -50,6 +50,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-lenovo-hr630.dtb \ aspeed-bmc-lenovo-hr855xg2.dtb \ aspeed-bmc-microsoft-olympus.dtb \ + aspeed-bmc-nvidia-gb200nvl-bmc.dtb \ aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-mowgli.dtb \ aspeed-bmc-opp-nicole.dtb \
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts new file +1128 -0
1,128 lines not on this page · raw message
Signature · 1 line
2.25.1