Skip to contentSkip to conversation

Add support for ADPM12160 a DC/DC Power Module

PATCH Superseded Alexis Czezar Torreno 2 participants 5 messages Apr 3, 2025 – Apr 4, 2025

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover Add support for ADPM12160 a DC/DC Power Module

Before adding the support for ADPM12160, this series includes a commit to fix the issue with max34451. The family of max344** contains switched PMBUS addresses 0x46 and 0x4A. For max34451, the version MAX34451ETNA6+ and later fixed this issue and this first commit supports this. The MFR_REVISION is used to differentiate the different max34451 chips.

The second commit adds the actual driver for adpm12160. ASPM12160 is a quarter brick DC/DC Power Module. It is a high power non-isolated converter capable of delivering a fully regulated 12V, with continuous power level of 1600W with peak power at 2400W for a limited time. Uses PMBus Configuration.

---
Changes in v2:
- Commit 1: MAX34451 Fix

-   Added a flag to denote if the device has correct pmbus address
-   Stored the pmbus address of concern inside max34440_data
-   Removed separate chip ID for max344451etna6+, detects this version

via MFR_REVISION
- Reverted max34440.rst to original. No edit deemed necessary
- Supported READ_VIN, READ_IIN, and STATUS_INPUT for max34451etna6+
- Commit 2: Add ADPM12160
- Adjusted code to base it on the new max34440.c
- Link to v1: https://lore.kernel.org/r/[email protected]

---
Alexis Czezar Torreno (2):

      hwmon: (pmbus/max34440): Fix support for max34451
      hwmon: (pmbus/max3440): add support adpm12160
 Documentation/hwmon/max34440.rst |  30 ++++++++---
 drivers/hwmon/pmbus/max34440.c   | 109 ++++++++++++++++++++++++++++++++++++---
 2 files changed, 124 insertions(+), 15 deletions(-)

---
base-commit: c812cc42f92d3d0b17c01b5db9a1dee5793a1491
change-id: 20250320-dev_adpm12160-5960e77a79be

Best regards,

Signature · 1 line
Alexis Czezar Torreno <[email protected]>
#1 lore raw

PATCH v2 1/2 hwmon: (pmbus/max34440): Fix support for max34451

The max344** family has an issue with some PMBUS address being switched. This includes max34451 however version MAX34451-NA6 and later has this issue fixed and this commit supports that update.

---
 drivers/hwmon/pmbus/max34440.c | 55 +++++++++++++++++++++++++++++++++++++++---
 1 file changed, 51 insertions(+), 4 deletions(-)
drivers/hwmon/pmbus/max34440.c +51 -4
index c9dda33831ff24e7b5e2fd1956a65e6bd2bfcbb9..585746806663409bc97042647f6c0aba4c6f520a 100644
@@ -34,16 +34,22 @@ enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };
 /*
  * The whole max344* family have IOUT_OC_WARN_LIMIT and IOUT_OC_FAULT_LIMIT
  * swapped from the standard pmbus spec addresses.
+ * For max34451, version MAX34451ETNA6+ and later has this issue fixed.
  */
 #define MAX34440_IOUT_OC_WARN_LIMIT	0x46
 #define MAX34440_IOUT_OC_FAULT_LIMIT	0x4A
 
+#define MAX34451ETNA6_MFR_REV		0x0012
+
 #define MAX34451_MFR_CHANNEL_CONFIG	0xe4
 #define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK	0x3f
 
 struct max34440_data {
 	int id;
 	struct pmbus_driver_info info;
+	bool pmbus_addr_fixed;
+	u32 iout_oc_warn_limit;
+	u32 iout_oc_fault_limit;
 };
 
 #define to_max34440_data(x)  container_of(x, struct max34440_data, info)
@@ -60,11 +66,11 @@ static int max34440_read_word_data(struct i2c_client *client, int page,
 	switch (reg) {
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
 		ret = pmbus_read_word_data(client, page, phase,
-					   MAX34440_IOUT_OC_FAULT_LIMIT);
+					   data->iout_oc_fault_limit);
 		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
 		ret = pmbus_read_word_data(client, page, phase,
-					   MAX34440_IOUT_OC_WARN_LIMIT);
+					   data->iout_oc_warn_limit);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MIN:
 		ret = pmbus_read_word_data(client, page, phase,
@@ -133,11 +139,11 @@ static int max34440_write_word_data(struct i2c_client *client, int page,
 
 	switch (reg) {
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
-		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_FAULT_LIMIT,
+		ret = pmbus_write_word_data(client, page, data->iout_oc_fault_limit,
 					    word);
 		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
-		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_WARN_LIMIT,
+		ret = pmbus_write_word_data(client, page, data->iout_oc_warn_limit,
 					    word);
 		break;
 	case PMBUS_VIRT_RESET_POUT_HISTORY:
@@ -235,6 +241,24 @@ static int max34451_set_supported_funcs(struct i2c_client *client,
 	 */
 
 	int page, rv;
+	bool max34451_na6 = false;
+
+	rv = i2c_smbus_read_word_data(client, PMBUS_MFR_REVISION);
+	if (rv < 0)
+		return rv;
+
+	if (rv == MAX34451ETNA6_MFR_REV) {
+		max34451_na6 = true;
+		data->pmbus_addr_fixed = true;
+		data->info.format[PSC_VOLTAGE_IN] = direct;
+		data->info.format[PSC_CURRENT_IN] = direct;
+		data->info.m[PSC_VOLTAGE_IN] = 1;
+		data->info.b[PSC_VOLTAGE_IN] = 0;
+		data->info.R[PSC_VOLTAGE_IN] = 3;
+		data->info.m[PSC_CURRENT_IN] = 1;
+		data->info.b[PSC_CURRENT_IN] = 0;
+		data->info.R[PSC_CURRENT_IN] = 2;
+	}
 
 	for (page = 0; page < 16; page++) {
 		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
@@ -251,16 +275,30 @@ static int max34451_set_supported_funcs(struct i2c_client *client,
 		case 0x20:
 			data->info.func[page] = PMBUS_HAVE_VOUT |
 				PMBUS_HAVE_STATUS_VOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_VIN |
+					PMBUS_HAVE_STATUS_INPUT;
 			break;
 		case 0x21:
 			data->info.func[page] = PMBUS_HAVE_VOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_VIN;
 			break;
 		case 0x22:
 			data->info.func[page] = PMBUS_HAVE_IOUT |
 				PMBUS_HAVE_STATUS_IOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_IIN |
+					PMBUS_HAVE_STATUS_INPUT;
 			break;
 		case 0x23:
 			data->info.func[page] = PMBUS_HAVE_IOUT;
+
+			if (max34451_na6)
+				data->info.func[page] |= PMBUS_HAVE_IIN;
 			break;
 		default:
 			break;
@@ -494,6 +532,7 @@ static int max34440_probe(struct i2c_client *client)
 		return -ENOMEM;
 	data->id = i2c_match_id(max34440_id, client)->driver_data;
 	data->info = max34440_info[data->id];
+	data->pmbus_addr_fixed = false;
 
 	if (data->id == max34451) {
 		rv = max34451_set_supported_funcs(client, data);
@@ -501,6 +540,14 @@ static int max34440_probe(struct i2c_client *client)
 			return rv;
 	}
 
+	if (data->pmbus_addr_fixed) {
+		data->iout_oc_fault_limit = PMBUS_IOUT_OC_FAULT_LIMIT;
+		data->iout_oc_warn_limit = PMBUS_IOUT_OC_WARN_LIMIT;
+	} else {
+		data->iout_oc_fault_limit = MAX34440_IOUT_OC_FAULT_LIMIT;
+		data->iout_oc_warn_limit = MAX34440_IOUT_OC_WARN_LIMIT;
+	}
+
 	return pmbus_do_probe(client, &data->info);
 }
 
Signature · 1 line
2.34.1
maintainer
#2 lore raw

Re: [PATCH v2 1/2] hwmon: (pmbus/max34440): Fix support for max34451

Quoted 21 lines · Alexis Czezar Torreno

The max344** family has an issue with some PMBUS address being switched. This includes max34451 however version MAX34451-NA6 and later has this issue fixed and this commit supports that update.

---
 drivers/hwmon/pmbus/max34440.c | 55 +++++++++++++++++++++++++++++++++++++++---
 1 file changed, 51 insertions(+), 4 deletions(-)
drivers/hwmon/pmbus/max34440.c +1 -0
index c9dda33831ff24e7b5e2fd1956a65e6bd2bfcbb9..585746806663409bc97042647f6c0aba4c6f520a 100644
@@ -34,16 +34,22 @@ enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };
 /*
  * The whole max344* family have IOUT_OC_WARN_LIMIT and IOUT_OC_FAULT_LIMIT
  * swapped from the standard pmbus spec addresses.
+ * For max34451, version MAX34451ETNA6+ and later has this issue fixed.
  */
 #define MAX34440_IOUT_OC_WARN_LIMIT	0x46
 #define MAX34440_IOUT_OC_FAULT_LIMIT	0x4A

drivers/hwmon/pmbus/max34440.c enum chips { max34440, max34441, max34446, max34451, max34460, max34461 }; · line 50

Quoted 10 lines
drivers/hwmon/pmbus/max34440.c +3 -0
 
+#define MAX34451ETNA6_MFR_REV		0x0012
+
 #define MAX34451_MFR_CHANNEL_CONFIG	0xe4
 #define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK	0x3f
 
 struct max34440_data {
 	int id;
 	struct pmbus_driver_info info;
+	bool pmbus_addr_fixed;

Unnecessary. See below.

drivers/hwmon/pmbus/max34440.c enum chips { max34440, max34441, max34446, max34451, max34460, max34461 }; · line 52

Quoted 2 lines
drivers/hwmon/pmbus/max34440.c +2 -0
+	u32 iout_oc_warn_limit;
+	u32 iout_oc_fault_limit;

u8 would be sufficient.

Quoted 32 lines
drivers/hwmon/pmbus/max34440.c +4 -4
 };
 
 #define to_max34440_data(x)  container_of(x, struct max34440_data, info)
@@ -60,11 +66,11 @@ static int max34440_read_word_data(struct i2c_client *client, int page,
 	switch (reg) {
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
 		ret = pmbus_read_word_data(client, page, phase,
-					   MAX34440_IOUT_OC_FAULT_LIMIT);
+					   data->iout_oc_fault_limit);
 		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
 		ret = pmbus_read_word_data(client, page, phase,
-					   MAX34440_IOUT_OC_WARN_LIMIT);
+					   data->iout_oc_warn_limit);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MIN:
 		ret = pmbus_read_word_data(client, page, phase,
@@ -133,11 +139,11 @@ static int max34440_write_word_data(struct i2c_client *client, int page,
 
 	switch (reg) {
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
-		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_FAULT_LIMIT,
+		ret = pmbus_write_word_data(client, page, data->iout_oc_fault_limit,
 					    word);
 		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
-		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_WARN_LIMIT,
+		ret = pmbus_write_word_data(client, page, data->iout_oc_warn_limit,
 					    word);
 		break;
 	case PMBUS_VIRT_RESET_POUT_HISTORY:

drivers/hwmon/pmbus/max34440.c static int max34451_set_supported_funcs(struct i2c_client *client, · line 250

Quoted 10 lines
drivers/hwmon/pmbus/max34440.c +7 -0
@@ -235,6 +241,24 @@ static int max34451_set_supported_funcs(struct i2c_client *client,
 	 */
 
 	int page, rv;
+	bool max34451_na6 = false;
+
+	rv = i2c_smbus_read_word_data(client, PMBUS_MFR_REVISION);
+	if (rv < 0)
+		return rv;
+
+	if (rv == MAX34451ETNA6_MFR_REV) {

Sure that this is only one revision ?
Would it be better to use ">=" instead of "==" ?

drivers/hwmon/pmbus/max34440.c static int max34451_set_supported_funcs(struct i2c_client *client, · line 260

Quoted 10 lines
drivers/hwmon/pmbus/max34440.c +10 -0
+		max34451_na6 = true;
+		data->pmbus_addr_fixed = true;
+		data->info.format[PSC_VOLTAGE_IN] = direct;
+		data->info.format[PSC_CURRENT_IN] = direct;
+		data->info.m[PSC_VOLTAGE_IN] = 1;
+		data->info.b[PSC_VOLTAGE_IN] = 0;
+		data->info.R[PSC_VOLTAGE_IN] = 3;
+		data->info.m[PSC_CURRENT_IN] = 1;
+		data->info.b[PSC_CURRENT_IN] = 0;
+		data->info.R[PSC_CURRENT_IN] = 2;

Assign register addresses directly here.

		data->iout_oc_fault_limit = PMBUS_IOUT_OC_FAULT_LIMIT;
		data->iout_oc_warn_limit = PMBUS_IOUT_OC_WARN_LIMIT;
	} else {
		data->iout_oc_fault_limit = MAX34440_IOUT_OC_FAULT_LIMIT;
		data->iout_oc_warn_limit = MAX34440_IOUT_OC_WARN_LIMIT;

drivers/hwmon/pmbus/max34440.c static int max34451_set_supported_funcs(struct i2c_client *client, · line 261

Quoted 1 line
drivers/hwmon/pmbus/max34440.c +1 -0
+	}

Thanks,
Guenter

#3 lore raw

RE: [PATCH v2 1/2] hwmon: (pmbus/max34440): Fix support for max34451

Quoted 57 lines

-----Original Message-----
From: Guenter Roeck <[email protected]> On Behalf Of Guenter Roeck
Sent: Friday, April 4, 2025 12:33 AM
To: Torreno, Alexis Czezar <[email protected]>
Cc: Jean Delvare <[email protected]>; Jonathan Corbet <[email protected]>; Delphine CC Chiu <[email protected]>; linux- [email protected]; [email protected]; linux- [email protected]; [email protected]
Subject: Re: [PATCH v2 1/2] hwmon: (pmbus/max34440): Fix support for max34451

[External]

Quoted 4 lines · Alexis Czezar Torreno

The max344** family has an issue with some PMBUS address being switched. This includes max34451 however version MAX34451-NA6 and later has this issue fixed and this commit supports that update.

Quoted 9 lines
---
 drivers/hwmon/pmbus/max34440.c | 55
+++++++++++++++++++++++++++++++++++++++---
 1 file changed, 51 insertions(+), 4 deletions(-)
(quoted diff) +0 -0

b/drivers/hwmon/pmbus/max34440.c index

c9dda33831ff24e7b5e2fd1956a65e6bd2bfcbb9..585746806663409bc970426 47f6c

drivers/hwmon/pmbus/max34440.c enum chips { max34440, max34441, max34446, · line 36

Quoted 7 lines

0aba4c6f520a 100644

drivers/hwmon/pmbus/max34440.c +0 -0
@@ -34,16 +34,22 @@ enum chips { max34440, max34441, max34446,
 max34451, max34460, max34461 };
 /*
  * The whole max344* family have IOUT_OC_WARN_LIMIT and

IOUT_OC_FAULT_LIMIT

Quoted 5 lines
drivers/hwmon/pmbus/max34440.c +1 -0
  * swapped from the standard pmbus spec addresses.
+ * For max34451, version MAX34451ETNA6+ and later has this issue fixed.
  */
 #define MAX34440_IOUT_OC_WARN_LIMIT	0x46
 #define MAX34440_IOUT_OC_FAULT_LIMIT	0x4A

drivers/hwmon/pmbus/max34440.c enum chips { max34440, max34441, max34446, max34451, max34460, max34461 }; · line 50

Quoted 10 lines
drivers/hwmon/pmbus/max34440.c +3 -0
 
+#define MAX34451ETNA6_MFR_REV		0x0012
+
 #define MAX34451_MFR_CHANNEL_CONFIG	0xe4
 #define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK	0x3f
 
 struct max34440_data {
 	int id;
 	struct pmbus_driver_info info;
+	bool pmbus_addr_fixed;

Unnecessary. See below.

Quoted 4 lines

drivers/hwmon/pmbus/max34440.c enum chips { max34440, max34441, max34446, max34451, max34460, max34461 }; · line 52

Quoted 2 lines
drivers/hwmon/pmbus/max34440.c +2 -0
+	u32 iout_oc_warn_limit;
+	u32 iout_oc_fault_limit;

u8 would be sufficient.

Will change

Quoted 45 lines
Quoted 5 lines
drivers/hwmon/pmbus/max34440.c +0 -0
 };
 

#define to_max34440_data(x) container_of(x, struct max34440_data,
info) @@ -60,11 +66,11 @@ static int max34440_read_word_data(struct

i2c_client *client, int page,

drivers/hwmon/pmbus/max34440.c static int max34440_read_word_data(struct i2c_client *client, int page,

Quoted 4 lines
drivers/hwmon/pmbus/max34440.c +0 -1
 	switch (reg) {
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
 		ret = pmbus_read_word_data(client, page, phase,
-

MAX34440_IOUT_OC_FAULT_LIMIT);

drivers/hwmon/pmbus/max34440.c static int max34440_read_word_data(struct i2c_client *client, int page,

Quoted 5 lines
drivers/hwmon/pmbus/max34440.c +1 -1
+					   data->iout_oc_fault_limit);
 		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
 		ret = pmbus_read_word_data(client, page, phase,
-

MAX34440_IOUT_OC_WARN_LIMIT);

drivers/hwmon/pmbus/max34440.c static int max34440_read_word_data(struct i2c_client *client, int page,

Quoted 4 lines
drivers/hwmon/pmbus/max34440.c +1 -0
+					   data->iout_oc_warn_limit);
 		break;
 	case PMBUS_VIRT_READ_VOUT_MIN:
 		ret = pmbus_read_word_data(client, page, phase, @@ -133,11

+139,11

drivers/hwmon/pmbus/max34440.c static int max34440_read_word_data(struct i2c_client *client, int page,

Quoted 6 lines

@@ static int max34440_write_word_data(struct i2c_client *client, int page,

drivers/hwmon/pmbus/max34440.c +0 -1
 	switch (reg) {
 	case PMBUS_IOUT_OC_FAULT_LIMIT:
-		ret = pmbus_write_word_data(client, page,

MAX34440_IOUT_OC_FAULT_LIMIT,

drivers/hwmon/pmbus/max34440.c static int max34440_write_word_data(struct i2c_client *client, int page,

Quoted 6 lines
drivers/hwmon/pmbus/max34440.c +2 -1
+		ret = pmbus_write_word_data(client, page,
+data->iout_oc_fault_limit,
 					    word);
 		break;
 	case PMBUS_IOUT_OC_WARN_LIMIT:
-		ret = pmbus_write_word_data(client, page,

MAX34440_IOUT_OC_WARN_LIMIT,

drivers/hwmon/pmbus/max34440.c static int max34451_set_supported_funcs(struct

Quoted 6 lines
drivers/hwmon/pmbus/max34440.c +1 -0
+		ret = pmbus_write_word_data(client, page, data-

iout_oc_warn_limit,

drivers/hwmon/pmbus/max34440.c +0 -0
 					    word);
 		break;
 	case PMBUS_VIRT_RESET_POUT_HISTORY:
@@ -235,6 +241,24 @@ static int max34451_set_supported_funcs(struct

i2c_client *client,

Quoted 2 lines
drivers/hwmon/pmbus/max34440.c +0 -0
 	 */
 
Quoted 11 lines

drivers/hwmon/pmbus/max34440.c static int max34451_set_supported_funcs(struct i2c_client *client, · line 250

Quoted 8 lines
drivers/hwmon/pmbus/max34440.c +7 -0
 	int page, rv;
+	bool max34451_na6 = false;
+
+	rv = i2c_smbus_read_word_data(client, PMBUS_MFR_REVISION);
+	if (rv < 0)
+		return rv;
+
+	if (rv == MAX34451ETNA6_MFR_REV) {

Sure that this is only one revision ?
Would it be better to use ">=" instead of "==" ?

Currently yes this is the only revision and the latest It is nice to future proof this just in case so will change to >=

Quoted 13 lines

drivers/hwmon/pmbus/max34440.c static int max34451_set_supported_funcs(struct i2c_client *client, · line 260

Quoted 11 lines
drivers/hwmon/pmbus/max34440.c +10 -0
+		max34451_na6 = true;
+		data->pmbus_addr_fixed = true;
+		data->info.format[PSC_VOLTAGE_IN] = direct;
+		data->info.format[PSC_CURRENT_IN] = direct;
+		data->info.m[PSC_VOLTAGE_IN] = 1;
+		data->info.b[PSC_VOLTAGE_IN] = 0;
+		data->info.R[PSC_VOLTAGE_IN] = 3;
+		data->info.m[PSC_CURRENT_IN] = 1;
+		data->info.b[PSC_CURRENT_IN] = 0;
+		data->info.R[PSC_CURRENT_IN] = 2;

Assign register addresses directly here.

Ah I see, will move.

Thanks!

Quoted 13 lines
		data->iout_oc_fault_limit = PMBUS_IOUT_OC_FAULT_LIMIT;
		data->iout_oc_warn_limit = PMBUS_IOUT_OC_WARN_LIMIT;
	} else {
		data->iout_oc_fault_limit =
MAX34440_IOUT_OC_FAULT_LIMIT;
		data->iout_oc_warn_limit =

MAX34440_IOUT_OC_WARN_LIMIT;

drivers/hwmon/pmbus/max34440.c static int max34451_set_supported_funcs(struct · line 261

Quoted 1 line
drivers/hwmon/pmbus/max34440.c +1 -0
+	}

Thanks,
Guenter

#4 lore raw

PATCH v2 2/2 hwmon: (pmbus/max3440): add support adpm12160

In reply to Alexis Czezar Torreno

ASPM12160 is a quarter brick DC/DC Power Module. It is a high power non-isolated converter capable of delivering a fully regulated 12V, with continuous power level of 1600W with peak power at 2400W for a limited time. Uses PMBus Configuration.

---
 Documentation/hwmon/max34440.rst | 30 ++++++++++++++++------
 drivers/hwmon/pmbus/max34440.c   | 54 +++++++++++++++++++++++++++++++++++++---
 2 files changed, 73 insertions(+), 11 deletions(-)
Documentation/hwmon/max34440.rst +22 -8
index 162d289f08140341e8e76ab7033834ba07a8b935..8591a7152ce580a04b6965301f9bacd9b0a1a661 100644
@@ -3,6 +3,14 @@ Kernel driver max34440
 
 Supported chips:
 
+  * ADI ADPM12160
+
+    Prefixes: 'adpm12160'
+
+    Addresses scanned: -
+
+    Datasheet: -
+
   * Maxim MAX34440
 
     Prefixes: 'max34440'
@@ -67,13 +75,14 @@ Author: Guenter Roeck <[email protected]>
 Description
 -----------
 
-This driver supports hardware monitoring for Maxim MAX34440 PMBus 6-Channel
-Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager
-and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger.
-It also supports the MAX34451, MAX34460, and MAX34461 PMBus Voltage Monitor &
-Sequencers. The MAX34451 supports monitoring voltage or current of 12 channels
-based on GIN pins. The MAX34460 supports 12 voltage channels, and the MAX34461
-supports 16 voltage channels.
+This driver supports multiple devices: hardware monitoring for Maxim MAX34440
+PMBus 6-Channel Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply
+Manager and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data
+Logger; PMBus Voltage Monitor and Sequencers for MAX34451, MAX34460, and
+MAX34461; PMBus DC/DC Power Module ADPM12160. The MAX34451 supports monitoring
+voltage or current of 12 channels based on GIN pins. The MAX34460 supports 12
+voltage channels, and the MAX34461 supports 16 voltage channels. The ADPM1260
+also monitors both input and output of voltage and current.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
@@ -128,7 +137,10 @@ in[1-6]_highest		Historical maximum voltage.
 in[1-6]_reset_history	Write any value to reset history.
 ======================= =======================================================
 
-.. note:: MAX34446 only supports in[1-4].
+.. note::
+
+    - MAX34446 only supports in[1-4].
+    - ADPM12160 only supports in[1-2]. Label is "vin1" and "vout1" respectively.
 
 Curr
 ~~~~
@@ -150,6 +162,7 @@ curr[1-6]_reset_history	Write any value to reset history.
 
     - in6 and curr6 attributes only exist for MAX34440.
     - MAX34446 only supports curr[1-4].
+    - For ADPM12160, curr[1] is "iin1" and curr[2-6] are "iout[1-5].
 
 Power
 ~~~~~
@@ -185,6 +198,7 @@ temp[1-8]_reset_history	Write any value to reset history.
 .. note::
    - temp7 and temp8 attributes only exist for MAX34440.
    - MAX34446 only supports temp[1-3].
+   - ADPM12160 only supports temp[1].
 
 
 .. note::
drivers/hwmon/pmbus/max34440.c +51 -3

90 lines not on this page · raw message

Signature · 1 line
2.34.1