Add support for ADPM12160 a DC/DC Power Module
Subsystems (3)
v3 cover Add support for ADPM12160 a DC/DC Power Module
Before adding the support for ADPM12160, this series includes a commit to fix the issue with max34451. The family of max344** contains switched PMBUS addresses 0x46 and 0x4A. For max34451, the version MAX34451ETNA6+ and later fixed this issue and this first commit supports this. The MFR_REVISION is used to differentiate the different max34451 chips.
The second commit adds the actual driver for adpm12160. ASPM12160 is a quarter brick DC/DC Power Module. It is a high power non-isolated converter capable of delivering a fully regulated 12V, with continuous power level of 1600W with peak power at 2400W for a limited time. Uses PMBus Configuration.
---
Changes in v3:
- Commit 1: MAX34451 Fix
- Removed bool pmbus_addr_fixed in max34440_data
- Reduced iout_oc_warn/fault_limit from u32 to u8
- Used >= during revision check instead of ==
- Moved the assignment of correct pmbus registers
- Commit 2: Add ADPM12160
- Adjusted code to base it on the new max34440.c
- Link to v2: https://lore.kernel.org/r/[email protected]
Changes in v2:
- Commit 1: MAX34451 Fix
- Added a flag to denote if the device has correct pmbus address - Stored the pmbus address of concern inside max34440_data - Removed separate chip ID for max344451etna6+, detects this version
via MFR_REVISION
- Reverted max34440.rst to original. No edit deemed necessary
- Supported READ_VIN, READ_IIN, and STATUS_INPUT for max34451etna6+
- Commit 2: Add ADPM12160
- Adjusted code to base it on the new max34440.c
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Alexis Czezar Torreno (2):
hwmon: (pmbus/max34440): Fix support for max34451
hwmon: (pmbus/max34440): add support adpm12160Documentation/hwmon/max34440.rst | 30 +++++++++--- drivers/hwmon/pmbus/max34440.c | 103 ++++++++++++++++++++++++++++++++++++--- 2 files changed, 118 insertions(+), 15 deletions(-)
---
base-commit: c812cc42f92d3d0b17c01b5db9a1dee5793a1491
change-id: 20250320-dev_adpm12160-5960e77a79be
Best regards,
Signature · 1 line
Alexis Czezar Torreno <[email protected]>
PATCH v3 1/2 hwmon: (pmbus/max34440): Fix support for max34451
The max344** family has an issue with some PMBUS address being switched. This includes max34451 however version MAX34451-NA6 and later has this issue fixed and this commit supports that update.
--- drivers/hwmon/pmbus/max34440.c | 48 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 44 insertions(+), 4 deletions(-)
drivers/hwmon/pmbus/max34440.c +44 -4
@@ -34,16 +34,21 @@ enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };/* * The whole max344* family have IOUT_OC_WARN_LIMIT and IOUT_OC_FAULT_LIMIT * swapped from the standard pmbus spec addresses. +* For max34451, version MAX34451ETNA6+ and later has this issue fixed. */ #define MAX34440_IOUT_OC_WARN_LIMIT 0x46#define MAX34440_IOUT_OC_FAULT_LIMIT 0x4A +#define MAX34451ETNA6_MFR_REV 0x0012 +#define MAX34451_MFR_CHANNEL_CONFIG 0xe4#define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK 0x3fstruct max34440_data {int id;struct pmbus_driver_info info; +u8 iout_oc_warn_limit; +u8 iout_oc_fault_limit; };#define to_max34440_data (x) container_of(x, struct max34440_data, info)
@@ -60,11 +65,11 @@ static int max34440_read_word_data(struct i2c_client *client, int page,switch (reg) {case PMBUS_IOUT_OC_FAULT_LIMIT : ret =pmbus_read_word_data (client, page, phase, -MAX34440_IOUT_OC_FAULT_LIMIT ); + data->iout_oc_fault_limit);break ;case PMBUS_IOUT_OC_WARN_LIMIT : ret =pmbus_read_word_data (client, page, phase, -MAX34440_IOUT_OC_WARN_LIMIT ); + data->iout_oc_warn_limit);break ;case PMBUS_VIRT_READ_VOUT_MIN : ret = pmbus_read_word_data(client, page, phase,
@@ -133,11 +138,11 @@ static int max34440_write_word_data(struct i2c_client *client, int page,switch (reg) {case PMBUS_IOUT_OC_FAULT_LIMIT : - ret =pmbus_write_word_data (client, page,MAX34440_IOUT_OC_FAULT_LIMIT , + ret =pmbus_write_word_data (client, page, data->iout_oc_fault_limit, word);break ;case PMBUS_IOUT_OC_WARN_LIMIT : - ret =pmbus_write_word_data (client, page,MAX34440_IOUT_OC_WARN_LIMIT , + ret =pmbus_write_word_data (client, page, data->iout_oc_warn_limit, word);break ;case PMBUS_VIRT_RESET_POUT_HISTORY :
@@ -235,6 +240,25 @@ static int max34451_set_supported_funcs(struct i2c_client *client,*/ int page, rv; +bool max34451_na6 = false; + + rv =i2c_smbus_read_word_data (client,PMBUS_MFR_REVISION ); +if (rv <0 ) +return rv; + +if (rv >=MAX34451ETNA6_MFR_REV ) { + max34451_na6 = true; + data->info.format[PSC_VOLTAGE_IN ] = direct; + data->info.format[PSC_CURRENT_IN ] = direct; + data->info.m[PSC_VOLTAGE_IN ] =1 ; + data->info.b[PSC_VOLTAGE_IN ] =0 ; + data->info.R[PSC_VOLTAGE_IN ] =3 ; + data->info.m[PSC_CURRENT_IN ] =1 ; + data->info.b[PSC_CURRENT_IN ] =0 ; + data->info.R[PSC_CURRENT_IN ] =2 ; + data->iout_oc_fault_limit =PMBUS_IOUT_OC_FAULT_LIMIT ; + data->iout_oc_warn_limit =PMBUS_IOUT_OC_WARN_LIMIT ; + }for (page =0 ; page <16 ; page++) { rv =i2c_smbus_write_byte_data (client,PMBUS_PAGE , page);
@@ -251,16 +275,30 @@ static int max34451_set_supported_funcs(struct i2c_client *client,case 0x20 : data->info.func[page] =PMBUS_HAVE_VOUT |PMBUS_HAVE_STATUS_VOUT ; + +if (max34451_na6) + data->info.func[page] |=PMBUS_HAVE_VIN | +PMBUS_HAVE_STATUS_INPUT ;break ;case 0x21 : data->info.func[page] =PMBUS_HAVE_VOUT ; + +if (max34451_na6) + data->info.func[page] |=PMBUS_HAVE_VIN ;break ;case 0x22 : data->info.func[page] =PMBUS_HAVE_IOUT |PMBUS_HAVE_STATUS_IOUT ; + +if (max34451_na6) + data->info.func[page] |=PMBUS_HAVE_IIN | +PMBUS_HAVE_STATUS_INPUT ;break ;case 0x23 : data->info.func[page] =PMBUS_HAVE_IOUT ; + +if (max34451_na6) + data->info.func[page] |=PMBUS_HAVE_IIN ;break ;default :break ;
@@ -494,6 +532,8 @@ static int max34440_probe(struct i2c_client *client)return -ENOMEM ; data->id =i2c_match_id (max34440_id, client)->driver_data; data->info = max34440_info[data->id]; + data->iout_oc_fault_limit =MAX34440_IOUT_OC_FAULT_LIMIT ; + data->iout_oc_warn_limit =MAX34440_IOUT_OC_WARN_LIMIT ;if (data->id == max34451) { rv =max34451_set_supported_funcs (client, data);
Signature · 1 line
2.34.1
Re: [PATCH v3 1/2] hwmon: (pmbus/max34440): Fix support for max34451
Quoted 5 lines · Alexis Czezar Torreno
The max344** family has an issue with some PMBUS address being switched. This includes max34451 however version MAX34451-NA6 and later has this issue fixed and this commit supports that update.
Signed-off-by Alexis Czezar Torreno <[email protected]>
Applied.
Thanks,
Guenter
PATCH v3 2/2 hwmon: (pmbus/max34440): add support adpm12160
In reply to Alexis Czezar TorrenoASPM12160 is a quarter brick DC/DC Power Module. It is a high power non-isolated converter capable of delivering a fully regulated 12V, with continuous power level of 1600W with peak power at 2400W for a limited time. Uses PMBus Configuration.
--- Documentation/hwmon/max34440.rst | 30 ++++++++++++++++------ drivers/hwmon/pmbus/max34440.c | 55 +++++++++++++++++++++++++++++++++++++--- 2 files changed, 74 insertions(+), 11 deletions(-)
Documentation/hwmon/max34440.rst +22 -8
@@ -3,6 +3,14 @@ Kernel driver max34440 Supported chips: + * ADI ADPM12160 + + Prefixes: 'adpm12160' + + Addresses scanned: - + + Datasheet: - + * Maxim MAX34440 Prefixes: 'max34440'
@@ -67,13 +75,14 @@ Author: Guenter Roeck <[email protected]> Description ----------- -This driver supports hardware monitoring for Maxim MAX34440 PMBus 6-Channel -Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager -and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger. -It also supports the MAX34451, MAX34460, and MAX34461 PMBus Voltage Monitor & -Sequencers. The MAX34451 supports monitoring voltage or current of 12 channels -based on GIN pins. The MAX34460 supports 12 voltage channels, and the MAX34461 -supports 16 voltage channels. +This driver supports multiple devices: hardware monitoring for Maxim MAX34440 +PMBus 6-Channel Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply +Manager and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data +Logger; PMBus Voltage Monitor and Sequencers for MAX34451, MAX34460, and +MAX34461; PMBus DC/DC Power Module ADPM12160. The MAX34451 supports monitoring +voltage or current of 12 channels based on GIN pins. The MAX34460 supports 12 +voltage channels, and the MAX34461 supports 16 voltage channels. The ADPM1260 +also monitors both input and output of voltage and current. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
@@ -128,7 +137,10 @@ in[1-6]_highest Historical maximum voltage. in[1-6]_reset_history Write any value to reset history. ======================= ======================================================= -.. note:: MAX34446 only supports in[1-4]. +.. note:: + + - MAX34446 only supports in[1-4]. + - ADPM12160 only supports in[1-2]. Label is "vin1" and "vout1" respectively. Curr ~~~~
@@ -150,6 +162,7 @@ curr[1-6]_reset_history Write any value to reset history. - in6 and curr6 attributes only exist for MAX34440. - MAX34446 only supports curr[1-4]. + - For ADPM12160, curr[1] is "iin1" and curr[2-6] are "iout[1-5]. Power ~~~~~
@@ -185,6 +198,7 @@ temp[1-8]_reset_history Write any value to reset history. .. note:: - temp7 and temp8 attributes only exist for MAX34440. - MAX34446 only supports temp[1-3]. + - ADPM12160 only supports temp[1]. .. note::
drivers/hwmon/pmbus/max34440.c +52 -3
91 lines not on this page · raw message
Signature · 1 line
2.34.1
Re: [PATCH v3 2/2] hwmon: (pmbus/max34440): add support adpm12160
Quoted 6 lines · Alexis Czezar Torreno
ASPM12160 is a quarter brick DC/DC Power Module. It is a high power non-isolated converter capable of delivering a fully regulated 12V, with continuous power level of 1600W with peak power at 2400W for a limited time. Uses PMBus Configuration.
Signed-off-by Alexis Czezar Torreno <[email protected]>
Applied.
Thanks,
Guenter