Skip to content

Add support for ADPM12160 a DC/DC Power Module

Alexis Czezar Torreno linux-doc linux-hwmon linux-i2c lkml 3 versions – Applied

Status from this message: Applied.

Get series with b4
b4 am [email protected] change-id 20250320-dev_adpm12160-5960e77a79be

Versions newest first

  1. v3 Latest2 patches 2 repliesApplied
  2. v22 patches 2 repliesSuperseded
  3. v12 patches 3 repliesSuperseded

Changes in v3 from the cover letter

- Commit 1: MAX34451 Fix
- Removed bool pmbus_addr_fixed in max34440_data
- Reduced iout_oc_warn/fault_limit from u32 to u8
- Used >= during revision check instead of ==
- Moved the assignment of correct pmbus registers
- Commit 2: Add ADPM12160
- Adjusted code to base it on the new max34440.c
- Link to v2: https://lore.kernel.org/r/[email protected]

Patches in v3 Applied

#Subject and filesSizeRepliesApplied
1/2hwmon: (pmbus/max34440): Fix support for max34451drivers/hwmon/pmbus/max34440.c+44 -41 reply
2/2hwmon: (pmbus/max34440): add support adpm12160Documentation/hwmon/max34440.rst drivers/hwmon/pmbus/max34440.c+74 -111 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH v3 0/2] Add support for ADPM12160 a DC/DC Power Module

Before adding the support for ADPM12160, this series includes a commit to fix the issue with max34451. The family of max344** contains switched PMBUS addresses 0x46 and 0x4A. For max34451, the version MAX34451ETNA6+ and later fixed this issue and this first commit supports this. The MFR_REVISION is used to differentiate the different max34451 chips.

The second commit adds the actual driver for adpm12160. ASPM12160 is a quarter brick DC/DC Power Module. It is a high power non-isolated converter capable of delivering a fully regulated 12V, with continuous power level of 1600W with peak power at 2400W for a limited time. Uses PMBus Configuration.

---
Changes in v3:
- Commit 1: MAX34451 Fix
- Removed bool pmbus_addr_fixed in max34440_data
- Reduced iout_oc_warn/fault_limit from u32 to u8
- Used >= during revision check instead of ==
- Moved the assignment of correct pmbus registers
- Commit 2: Add ADPM12160
- Adjusted code to base it on the new max34440.c
- Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:
- Commit 1: MAX34451 Fix

-   Added a flag to denote if the device has correct pmbus address
-   Stored the pmbus address of concern inside max34440_data
-   Removed separate chip ID for max344451etna6+, detects this version

via MFR_REVISION
- Reverted max34440.rst to original. No edit deemed necessary
- Supported READ_VIN, READ_IIN, and STATUS_INPUT for max34451etna6+
- Commit 2: Add ADPM12160
- Adjusted code to base it on the new max34440.c
- Link to v1: https://lore.kernel.org/r/[email protected]

---
Alexis Czezar Torreno (2):

      hwmon: (pmbus/max34440): Fix support for max34451
      hwmon: (pmbus/max34440): add support adpm12160
 Documentation/hwmon/max34440.rst |  30 +++++++++---
 drivers/hwmon/pmbus/max34440.c   | 103 ++++++++++++++++++++++++++++++++++++---
 2 files changed, 118 insertions(+), 15 deletions(-)

---
base-commit: c812cc42f92d3d0b17c01b5db9a1dee5793a1491
change-id: 20250320-dev_adpm12160-5960e77a79be

Best regards,

Signature · 1 line
Alexis Czezar Torreno <[email protected]>