Skip to contentSkip to conversation

RISC-V: Add CVA6 machine

PATCH In review Ben Dooks 2 participants 7 messages Jun 9, 2025

Subsystems (2)
lore
Share & tools
lore
author
#1 lore raw

PATCH v3 1/3 hw/riscv: add CVA6 machine

Add a (currently Genesy2 based) CVA6 machine.

Has SPI and UART, the GPIO and Ethernet are currently black-holed as there is no hardware model for them (lowRISC ethernet and Xilinx GPIO)

---
v3:
- fix missed plic comment
- made 64bit only for now
v2:
- whitespace fixes
- use g_autofree on plic
v1:
- squashed in fixes for sd-card and new qemu init
- move to spdx for cva6 machine
- code cleanups missed in first review

updated plic regmap

make cva6 64bit for now

---
 hw/riscv/Kconfig        |  11 ++
 hw/riscv/cva6.c         | 229 ++++++++++++++++++++++++++++++++++++++++
 hw/riscv/meson.build    |   1 +
 include/hw/riscv/cva6.h |  88 +++++++++++++++
 4 files changed, 329 insertions(+)
 create mode 100644 hw/riscv/cva6.c
 create mode 100644 include/hw/riscv/cva6.h
hw/riscv/Kconfig +11 -0
index e6a0ac1fa1..033e29dab1 100644
@@ -9,6 +9,17 @@ config IBEX
 
 # RISC-V machines in alphabetical order
 
+# technically it might be possible to build cva6 32bit
+config CVA6
+    bool
+    default y
+    depends on RISCV64
+    select DEVICE_TREE
+    select SIFIVE_PLIC
+    select XILINX_SPI
+    select RISCV_ACLINT
+    select UNIMP
+
 config MICROCHIP_PFSOC
     bool
     default y
hw/riscv/cva6.c new file +229 -0

229 lines not on this page · raw message

hw/riscv/meson.build +1 -0
index c22f3a7216..a32fffab63 100644
@@ -2,6 +2,7 @@ riscv_ss = ss.source_set()
 riscv_ss.add(files('boot.c'))
 riscv_ss.add(when: 'CONFIG_RISCV_NUMA', if_true: files('numa.c'))
 riscv_ss.add(files('riscv_hart.c'))
+riscv_ss.add(when: 'CONFIG_CVA6', if_true: files('cva6.c'))
 riscv_ss.add(when: 'CONFIG_OPENTITAN', if_true: files('opentitan.c'))
 riscv_ss.add(when: 'CONFIG_RISCV_VIRT', if_true: files('virt.c'))
 riscv_ss.add(when: 'CONFIG_SHAKTI_C', if_true: files('shakti_c.c'))
include/hw/riscv/cva6.h new file +88 -0

88 lines not on this page · raw message

Signature · 1 line
2.37.2.352.g3c44437643
#2 lore raw

Re: [PATCH v3 1/3] hw/riscv: add CVA6 machine

Quoted 108 lines · Ben Dooks

Add a (currently Genesy2 based) CVA6 machine.

Has SPI and UART, the GPIO and Ethernet are currently black-holed as there is no hardware model for them (lowRISC ethernet and Xilinx GPIO)

---
v3:
- fix missed plic comment
- made 64bit only for now
v2:
- whitespace fixes
- use g_autofree on plic
v1:
- squashed in fixes for sd-card and new qemu init
- move to spdx for cva6 machine
- code cleanups missed in first review

updated plic regmap

make cva6 64bit for now

---
 hw/riscv/Kconfig        |  11 ++
 hw/riscv/cva6.c         | 229 ++++++++++++++++++++++++++++++++++++++++
 hw/riscv/meson.build    |   1 +
 include/hw/riscv/cva6.h |  88 +++++++++++++++
 4 files changed, 329 insertions(+)
 create mode 100644 hw/riscv/cva6.c
 create mode 100644 include/hw/riscv/cva6.h
hw/riscv/Kconfig +11 -0
index e6a0ac1fa1..033e29dab1 100644
@@ -9,6 +9,17 @@ config IBEX
 
 # RISC-V machines in alphabetical order
 
+# technically it might be possible to build cva6 32bit
+config CVA6
+    bool
+    default y
+    depends on RISCV64
+    select DEVICE_TREE
+    select SIFIVE_PLIC
+    select XILINX_SPI
+    select RISCV_ACLINT
+    select UNIMP
+
 config MICROCHIP_PFSOC
     bool
     default y
hw/riscv/cva6.c new file +48 -0
new file mode 100644
index 0000000000..3adfa8b5cc
@@ -0,0 +1,229 @@
+/*
+ * QEMU RISC-V Board for OpenHW CVA6 SoC
+ *
+ * Copyright (c) 2025 Codethink Ltd
+ * Ben Dooks <[email protected]>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/error-report.h"
+#include "qemu/units.h"
+#include "qapi/error.h"
+#include "qapi/visitor.h"
+#include "hw/boards.h"
+#include "hw/irq.h"
+#include "hw/loader.h"
+#include "hw/sysbus.h"
+#include "hw/misc/unimp.h"
+
+#include "hw/sd/sd.h"
+#include "hw/ssi/ssi.h"
+
+#include "hw/riscv/cva6.h"
+#include "hw/riscv/boot.h"
+#include "hw/intc/riscv_aclint.h"
+
+#include "system/system.h"
+
+#include <libfdt.h>
+
+#define CVA6_ROM_BASE  0x10000
+
+static const MemMapEntry cva6_memmap[] = {
+    [CVA6_DEBUG] =              {  0x0000000,  0x1000 },
+    [CVA6_ROM] =                { CVA6_ROM_BASE, 0x10000 },
+    [CVA6_CLINT] =              {  0x2000000, 0xC0000 },
+    [CVA6_PLIC] =               {  0xC000000, 0x4000000 },
+    [CVA6_UART] =               { 0x10000000, 0x1000 },
+    [CVA6_TIMER] =              { 0x18000000, 0x10000 },
+    [CVA6_SPI] =                { 0x20000000, 0x800000 },
+    [CVA6_ETHERNET] =           { 0x30000000, 0x10000 },
+    [CVA6_GPIO] =               { 0x40000000, 0x1000 },
+    [CVA6_DRAM] =               { 0x80000000, 0x40000000 },
+};
+
+static void cva6_machine_init(MachineState *machine)
+{

hw/riscv/cva6.c line 58

Quoted 10 lines
hw/riscv/cva6.c new file +10 -0
+    MachineClass *mc = MACHINE_GET_CLASS(machine);
+    MemoryRegion *sys_mem = get_system_memory();
+    hwaddr dram_addr = cva6_memmap[CVA6_DRAM].base;
+    CVA6State *s = CVA6_MACHINE(machine);
+    RISCVBootInfo boot_info;
+
+    object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_CVA6);
+    qdev_realize(DEVICE(&s->soc), NULL, &error_fatal);
+
+    if (machine->ram_size > mc->default_ram_size) {

This should compare against cva6_memmap[CVA6_DRAM].size instead

Quoted 4 lines
hw/riscv/cva6.c new file +4 -0
+        error_report("RAM size is too big for DRAM area");
+        exit(EXIT_FAILURE);
+    }
+

hw/riscv/cva6.c line 72

Quoted 10 lines
hw/riscv/cva6.c new file +10 -0
+    memory_region_add_subregion(sys_mem, dram_addr, machine->ram);
+    riscv_boot_info_init(&boot_info, &s->soc.cpus);
+
+    if (machine->firmware) {
+         hwaddr firmware_load_addr = cva6_memmap[CVA6_ROM].base;
+         riscv_load_firmware(machine->firmware, &firmware_load_addr, NULL);
+    }
+
+     if (machine->kernel_filename) {
+         /* note - we've not tested just loading the kernel w/o uboot */

I don't think this is a useful comment, users can't see it and it seems prone to becoming stale.

If you want you can put something like this in the user documentation (or the wiki page) but it shouldn't be here

Quoted 104 lines
hw/riscv/cva6.c new file +104 -0
+         riscv_load_kernel(machine, &boot_info, dram_addr, false, NULL);
+    }
+
+}
+
+static void cva6_machine_class_init(ObjectClass *oc, const void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+
+    mc->desc = "RISC-V board for CVA6";
+    mc->init = cva6_machine_init;
+    mc->max_cpus = 1;
+    mc->default_ram_id = "cva6.ram";
+    /* start with "max" cpu type until we sort out CVA6 type */
+    mc->default_cpu_type = TYPE_RISCV_CPU_MAX;
+    mc->default_ram_size = cva6_memmap[CVA6_DRAM].size;
+};
+
+static void cva6_soc_init(Object *obj)
+{
+    CVA6SoCState *s = RISCV_CVA6(obj);
+
+    object_initialize_child(obj, "cpus", &s->cpus, TYPE_RISCV_HART_ARRAY);
+}
+
+static void cva6_add_spi(CVA6SoCState *s, const MemMapEntry *map)
+{
+    DriveInfo *dinfo;
+    BlockBackend *blk;
+    DeviceState *card_dev;
+    qemu_irq sd_cs;
+    DeviceState *sddev;
+    SysBusDevice *busdev;
+    DeviceState *spi_dev;
+    SSIBus *spi;
+
+    spi_dev = qdev_new("xlnx.xps-spi");
+    qdev_prop_set_uint8(spi_dev, "num-ss-bits", 1);
+    qdev_prop_set_string(spi_dev, "endianness", "little");
+
+    busdev = SYS_BUS_DEVICE(spi_dev);
+    sysbus_realize_and_unref(busdev, &error_fatal);
+    sysbus_mmio_map(busdev, 0, map->base);
+    sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(DEVICE(s->plic), CVA6_SPI_IRQ));
+
+    spi = (SSIBus *)qdev_get_child_bus(spi_dev, "spi");
+
+    sddev = ssi_create_peripheral(spi, "ssi-sd");
+    sd_cs = qdev_get_gpio_in_named(sddev, SSI_GPIO_CS, 0);
+    sysbus_connect_irq(busdev, 1, sd_cs);
+
+    dinfo = drive_get(IF_SD, 0, 0);
+    blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
+    card_dev = qdev_new(TYPE_SD_CARD_SPI);
+    qdev_prop_set_drive_err(card_dev, "drive", blk, &error_fatal);
+
+    qdev_realize_and_unref(card_dev, qdev_get_child_bus(sddev, "sd-bus"), &error_fatal);
+}
+
+static void not_implemented(const char *name, const MemMapEntry *map)
+{
+    create_unimplemented_device(name, map->base, map->size);
+}
+
+static void cva6_soc_realize(DeviceState *dev_soc, Error **errp)
+{
+    MemoryRegion *system_memory = get_system_memory();
+    MachineState *ms = MACHINE(qdev_get_machine());
+    CVA6SoCState *s = RISCV_CVA6(dev_soc);
+    const MemMapEntry *memmap = cva6_memmap;
+    MemoryRegion *rom = g_new(MemoryRegion, 1);
+    g_autofree char *plic_hart_config;
+
+    object_property_set_str(OBJECT(&s->cpus), "cpu-type", ms->cpu_type,
+                            &error_abort);
+    object_property_set_int(OBJECT(&s->cpus), "num-harts", ms->smp.cpus,
+                            &error_abort);
+    object_property_set_int(OBJECT(&s->cpus), "resetvec", CVA6_ROM_BASE,
+                            &error_abort);
+    sysbus_realize(SYS_BUS_DEVICE(&s->cpus), &error_fatal);
+
+    /* boot rom */
+    memory_region_init_rom(rom, OBJECT(dev_soc), "riscv.cva6.bootrom",
+                           memmap[CVA6_ROM].size, &error_fatal);
+    memory_region_add_subregion(system_memory, memmap[CVA6_ROM].base,
+                                rom);
+
+    /* create PLIC hart topology configuration string */
+    plic_hart_config = riscv_plic_hart_config_string(ms->smp.cpus);
+
+    /* MMIO */
+    s->plic = sifive_plic_create(memmap[CVA6_PLIC].base,
+        plic_hart_config, ms->smp.cpus, 0,
+        CVA6_PLIC_NUM_SOURCES,
+        CVA6_PLIC_NUM_PRIORITIES,
+        CVA6_PLIC_PRIORITY_BASE,
+        CVA6_PLIC_PENDING_BASE,
+        CVA6_PLIC_ENABLE_BASE,
+        CVA6_PLIC_ENABLE_STRIDE,
+        CVA6_PLIC_CONTEXT_BASE,
+        CVA6_PLIC_CONTEXT_STRIDE,
+        memmap[CVA6_PLIC].size);
+
+    riscv_aclint_swi_create(memmap[CVA6_CLINT].base, 0,

hw/riscv/cva6.c line 186

Quoted 10 lines
hw/riscv/cva6.c new file +10 -0
+                            ms->smp.cpus, false);
+
+    riscv_aclint_mtimer_create(
+        memmap[CVA6_CLINT].base + RISCV_ACLINT_SWI_SIZE,
+        RISCV_ACLINT_DEFAULT_MTIMER_SIZE, 0, ms->smp.cpus,
+        RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME,
+        CLINT_TIMEBASE_FREQ, true);
+
+    /* something in cva6-sdk uboot seems to prod the debug
+     * unit by accident, so make it not implemented */

The comment should follow the QEMU code style

https://www.qemu.org/docs/master/devel/style.html#comment-style

Quoted 7 lines
hw/riscv/cva6.c new file +7 -0
+    not_implemented("debug", &memmap[CVA6_DEBUG]);
+
+    /* 16550 uart, one 32bit register per 32bit word */
+
+    serial_mm_init(system_memory, memmap[CVA6_UART].base, 2,
+                   qdev_get_gpio_in(DEVICE(s->plic), CVA6_UART_IRQ),
+                   50*1000*10000,

hw/riscv/cva6.c line 203

Quoted 10 lines
hw/riscv/cva6.c new file +10 -0
+                   serial_hd(0), DEVICE_LITTLE_ENDIAN);
+
+    /* just unimplement the timers, network and gpio here for now.
+     * no-one seems to be using the apb timer block anyway*/
+    not_implemented("net", &memmap[CVA6_ETHERNET]);
+    not_implemented("gpio", &memmap[CVA6_GPIO]);
+    not_implemented("timer", &memmap[CVA6_TIMER]);
+
+    /* connect xilinx spi block here */
+    cva6_add_spi(s, &memmap[CVA6_SPI]);

Is the SPI really part of the SoC? Usually SPI blocks are part of the machine/board.

Alistair

Quoted 136 lines
hw/riscv/cva6.c new file +26 -0
+}
+
+static void cva6_soc_class_init(ObjectClass *oc, const void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(oc);
+
+    dc->realize = cva6_soc_realize;
+    dc->user_creatable = false;
+};
+
+static const TypeInfo cva6_types[] = {
+    {
+        .name           = TYPE_RISCV_CVA6,
+        .parent         = TYPE_DEVICE,
+        .instance_size  = sizeof(CVA6SoCState),
+        .instance_init  = cva6_soc_init,
+        .class_init     = cva6_soc_class_init,
+    }, {
+        .name           = TYPE_CVA6_MACHINE,
+        .parent         = TYPE_MACHINE,
+        .instance_size  = sizeof(CVA6State),
+        .class_init     = cva6_machine_class_init,
+    }
+};
+
+DEFINE_TYPES(cva6_types)
hw/riscv/meson.build +1 -0
index c22f3a7216..a32fffab63 100644
@@ -2,6 +2,7 @@ riscv_ss = ss.source_set()
 riscv_ss.add(files('boot.c'))
 riscv_ss.add(when: 'CONFIG_RISCV_NUMA', if_true: files('numa.c'))
 riscv_ss.add(files('riscv_hart.c'))
+riscv_ss.add(when: 'CONFIG_CVA6', if_true: files('cva6.c'))
 riscv_ss.add(when: 'CONFIG_OPENTITAN', if_true: files('opentitan.c'))
 riscv_ss.add(when: 'CONFIG_RISCV_VIRT', if_true: files('virt.c'))
 riscv_ss.add(when: 'CONFIG_SHAKTI_C', if_true: files('shakti_c.c'))
include/hw/riscv/cva6.h new file +88 -1
new file mode 100644
index 0000000000..48e0979a0a
@@ -0,0 +1,88 @@
+/*
+ * QEMU RISC-V Board for OpenHW CVA6 SoC
+ * https://github.com/openhwgroup/cva6/tree/master/corev_apu
+ *
+ * Copyright (c) 2025 Codethink Ltd
+ * Ben Dooks <[email protected]>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#ifndef HW_CVA6_H
+#define HW_CVA6_H
+
+#include "hw/riscv/riscv_hart.h"
+#include "hw/intc/sifive_plic.h"
+#include "hw/char/serial-mm.h"
+
+#include "hw/boards.h"
+#include "hw/sysbus.h"
+#include "qom/object.h"
+
+#define TYPE_RISCV_CVA6 "riscv.cva6.soc"
+OBJECT_DECLARE_SIMPLE_TYPE(CVA6SoCState, RISCV_CVA6)
+
+typedef struct CVA6SoCState {
+    /*< private >*/
+    DeviceState parent_obj;
+
+    /*< public >*/
+    RISCVHartArrayState cpus;
+    DeviceState *plic;
+    MemoryRegion rom;
+
+    uint32_t resetvec;
+} CVA6SoCState;
+
+#define TYPE_CVA6_MACHINE MACHINE_TYPE_NAME("cva6")
+OBJECT_DECLARE_SIMPLE_TYPE(CVA6State, CVA6_MACHINE)
+
+typedef struct CVA6State {
+    /*< private >*/
+    MachineState parent_obj;
+
+    /*< public >*/
+    CVA6SoCState soc;
+}
+CVA6State;
+
+enum {
+    CVA6_DEBUG,
+    CVA6_ROM,
+    CVA6_CLINT,
+    CVA6_PLIC,
+    CVA6_UART,
+    CVA6_TIMER,
+    CVA6_SPI,
+    CVA6_ETHERNET,
+    CVA6_GPIO,
+    CVA6_DRAM,
+};
+
+enum {
+    CVA6_UART_IRQ       = 1,
+    CVA6_SPI_IRQ        = 2,
+    CVA6_ETH_IRQ        = 3,
+    CVA6_TIMER0_OVF_IRQ = 4,
+    CVA6_TIMER0_CMP_IRQ = 5,
+    CVA6_TIMER1_OVF_IRQ = 6,
+    CVA6_TIMER1_CMP_IRQ = 7,
+};
+
+#define CLINT_TIMEBASE_FREQ 25000000
+
+/*
+ * plic register interface in corev_apu/rv_plic/rtl/plic_regmap.sv
+ * https://github.com/pulp-platform/rv_plic/blob/master/rtl/plic_regmap.sv
+*/
+
+#define CVA6_PLIC_NUM_SOURCES           32
+#define CVA6_PLIC_NUM_PRIORITIES        7
+#define CVA6_PLIC_PRIORITY_BASE         0x0000
+#define CVA6_PLIC_PENDING_BASE          0x1000
+#define CVA6_PLIC_ENABLE_BASE           0x2000
+#define CVA6_PLIC_ENABLE_STRIDE         0x80
+#define CVA6_PLIC_CONTEXT_BASE          0x200000
+#define CVA6_PLIC_CONTEXT_STRIDE        0x1000
+
+#endif /* HW_CVA6_H */
--

2.37.2.352.g3c44437643

author
#3 lore raw

PATCH v3 2/3 target/riscv: add cva6 core type

In reply to Ben Dooks

Add TYPE_RISCV_CPU_CVA6 for the CVA6 core

---
 target/riscv/cpu-qom.h |  1 +
 target/riscv/cpu.c     | 11 +++++++++++
 2 files changed, 12 insertions(+)
target/riscv/cpu-qom.h +1 -0
index 1ee05eb393..3daf75568c 100644
@@ -34,6 +34,7 @@
 #define TYPE_RISCV_CPU_BASE32           RISCV_CPU_TYPE_NAME("rv32")
 #define TYPE_RISCV_CPU_BASE64           RISCV_CPU_TYPE_NAME("rv64")
 #define TYPE_RISCV_CPU_BASE128          RISCV_CPU_TYPE_NAME("x-rv128")
+#define TYPE_RISCV_CPU_CVA6             RISCV_CPU_TYPE_NAME("cva6")
 #define TYPE_RISCV_CPU_RV32I            RISCV_CPU_TYPE_NAME("rv32i")
 #define TYPE_RISCV_CPU_RV32E            RISCV_CPU_TYPE_NAME("rv32e")
 #define TYPE_RISCV_CPU_RV64I            RISCV_CPU_TYPE_NAME("rv64i")
target/riscv/cpu.c +11 -0
index 629ac37501..fca45dc9d9 100644
@@ -3009,6 +3009,17 @@ static const TypeInfo riscv_cpu_type_infos[] = {
         .misa_mxl_max = MXL_RV64,
     ),
 
+    DEFINE_RISCV_CPU(TYPE_RISCV_CPU_CVA6, TYPE_RISCV_VENDOR_CPU,
+        .misa_ext = RVI | RVM | RVA | RVF | RVD | RVC | RVB | RVS | RVU,
+        .misa_mxl_max = MXL_RV64,
+        .cfg.max_satp_mode = VM_1_10_SV39,
+        .priv_spec = PRIV_VERSION_1_12_0,
+        .cfg.pmp = true,
+        .cfg.mmu = true,
+        .cfg.ext_zifencei = true,
+        .cfg.ext_zicsr = true,
+    ),
+
     DEFINE_RISCV_CPU(TYPE_RISCV_CPU_SIFIVE_E51, TYPE_RISCV_CPU_SIFIVE_E,
         .misa_mxl_max = MXL_RV64
     ),
Signature · 1 line
2.37.2.352.g3c44437643
Acked-by on v3 2/3
#4 lore raw

Re: [PATCH v3 2/3] target/riscv: add cva6 core type

Quoted 4 lines · Ben Dooks

Add TYPE_RISCV_CPU_CVA6 for the CVA6 core

Alistair

Quoted 43 lines
---
 target/riscv/cpu-qom.h |  1 +
 target/riscv/cpu.c     | 11 +++++++++++
 2 files changed, 12 insertions(+)
target/riscv/cpu-qom.h +1 -0
index 1ee05eb393..3daf75568c 100644
@@ -34,6 +34,7 @@
 #define TYPE_RISCV_CPU_BASE32           RISCV_CPU_TYPE_NAME("rv32")
 #define TYPE_RISCV_CPU_BASE64           RISCV_CPU_TYPE_NAME("rv64")
 #define TYPE_RISCV_CPU_BASE128          RISCV_CPU_TYPE_NAME("x-rv128")
+#define TYPE_RISCV_CPU_CVA6             RISCV_CPU_TYPE_NAME("cva6")
 #define TYPE_RISCV_CPU_RV32I            RISCV_CPU_TYPE_NAME("rv32i")
 #define TYPE_RISCV_CPU_RV32E            RISCV_CPU_TYPE_NAME("rv32e")
 #define TYPE_RISCV_CPU_RV64I            RISCV_CPU_TYPE_NAME("rv64i")
target/riscv/cpu.c +11 -1
index 629ac37501..fca45dc9d9 100644
@@ -3009,6 +3009,17 @@ static const TypeInfo riscv_cpu_type_infos[] = {
         .misa_mxl_max = MXL_RV64,
     ),
 
+    DEFINE_RISCV_CPU(TYPE_RISCV_CPU_CVA6, TYPE_RISCV_VENDOR_CPU,
+        .misa_ext = RVI | RVM | RVA | RVF | RVD | RVC | RVB | RVS | RVU,
+        .misa_mxl_max = MXL_RV64,
+        .cfg.max_satp_mode = VM_1_10_SV39,
+        .priv_spec = PRIV_VERSION_1_12_0,
+        .cfg.pmp = true,
+        .cfg.mmu = true,
+        .cfg.ext_zifencei = true,
+        .cfg.ext_zicsr = true,
+    ),
+
     DEFINE_RISCV_CPU(TYPE_RISCV_CPU_SIFIVE_E51, TYPE_RISCV_CPU_SIFIVE_E,
         .misa_mxl_max = MXL_RV64
     ),
--

2.37.2.352.g3c44437643

author
#5 lore raw

PATCH v3 3/3 hw/riscv: set cva6 to use TYPE_RISCV_CPU_CVA6

In reply to Ben Dooks

Change to using TYPE_RISCV_CPU_CVA6 once this is merged.

---
 hw/riscv/cva6.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
hw/riscv/cva6.c +1 -2
index 3adfa8b5cc..e6fd0ebafc 100644
@@ -83,8 +83,7 @@ static void cva6_machine_class_init(ObjectClass *oc, const void *data)
     mc->init = cva6_machine_init;
     mc->max_cpus = 1;
     mc->default_ram_id = "cva6.ram";
-    /* start with "max" cpu type until we sort out CVA6 type */
-    mc->default_cpu_type = TYPE_RISCV_CPU_MAX;
+    mc->default_cpu_type = TYPE_RISCV_CPU_CVA6;
     mc->default_ram_size = cva6_memmap[CVA6_DRAM].size;
 };
 
Signature · 1 line
2.37.2.352.g3c44437643
Reviewed-by on v3 3/3
#6 lore raw

Re: [PATCH v3 3/3] hw/riscv: set cva6 to use TYPE_RISCV_CPU_CVA6

Quoted 2 lines · Ben Dooks

Change to using TYPE_RISCV_CPU_CVA6 once this is merged.

You can also just change the patch order to not require this patch

Quoted 2 lines

Alistair

Quoted 22 lines
---
 hw/riscv/cva6.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
hw/riscv/cva6.c +1 -3
index 3adfa8b5cc..e6fd0ebafc 100644
@@ -83,8 +83,7 @@ static void cva6_machine_class_init(ObjectClass *oc, const void *data)
     mc->init = cva6_machine_init;
     mc->max_cpus = 1;
     mc->default_ram_id = "cva6.ram";
-    /* start with "max" cpu type until we sort out CVA6 type */
-    mc->default_cpu_type = TYPE_RISCV_CPU_MAX;
+    mc->default_cpu_type = TYPE_RISCV_CPU_CVA6;
     mc->default_ram_size = cva6_memmap[CVA6_DRAM].size;
 };
 
--

2.37.2.352.g3c44437643