RISC-V: Add CVA6 machine
Subsystems (2)
Add the CVA6 (the corev_apu from the fpga) model from
https://github.com/openhwgroup/cva6
Tree at:
https://gitlab.com/CodethinkLabs/qemu/-/tree/bjdooks/cva6-send-8jun2025?ref_type=heads
Fixes:
v3:
- fix missing file source
- set 64bit only for now
v2:
- rebased and fixed whitespace issues
PATCH v3 1/3 hw/riscv: add CVA6 machine
Add a (currently Genesy2 based) CVA6 machine.
Has SPI and UART, the GPIO and Ethernet are currently black-holed as there is no hardware model for them (lowRISC ethernet and Xilinx GPIO)
---
v3:
- fix missed plic comment
- made 64bit only for now
v2:
- whitespace fixes
- use g_autofree on plic
v1:
- squashed in fixes for sd-card and new qemu init
- move to spdx for cva6 machine
- code cleanups missed in first review
updated plic regmap
make cva6 64bit for now
--- hw/riscv/Kconfig | 11 ++ hw/riscv/cva6.c | 229 ++++++++++++++++++++++++++++++++++++++++ hw/riscv/meson.build | 1 + include/hw/riscv/cva6.h | 88 +++++++++++++++ 4 files changed, 329 insertions(+) create mode 100644 hw/riscv/cva6.c create mode 100644 include/hw/riscv/cva6.h
hw/riscv/Kconfig +11 -0
@@ -9,6 +9,17 @@ config IBEX # RISC-V machines in alphabetical order +# technically it might be possible to build cva6 32bit +config CVA6 + bool + default y + depends on RISCV64 + select DEVICE_TREE + select SIFIVE_PLIC + select XILINX_SPI + select RISCV_ACLINT + select UNIMP + config MICROCHIP_PFSOC bool default y
hw/riscv/cva6.c new file +229 -0
229 lines not on this page · raw message
hw/riscv/meson.build +1 -0
@@ -2,6 +2,7 @@ riscv_ss = ss.source_set() riscv_ss.add(files('boot.c')) riscv_ss.add(when: 'CONFIG_RISCV_NUMA', if_true: files('numa.c')) riscv_ss.add(files('riscv_hart.c')) +riscv_ss.add(when: 'CONFIG_CVA6', if_true: files('cva6.c')) riscv_ss.add(when: 'CONFIG_OPENTITAN', if_true: files('opentitan.c')) riscv_ss.add(when: 'CONFIG_RISCV_VIRT', if_true: files('virt.c')) riscv_ss.add(when: 'CONFIG_SHAKTI_C', if_true: files('shakti_c.c'))
include/hw/riscv/cva6.h new file +88 -0
88 lines not on this page · raw message
Signature · 1 line
2.37.2.352.g3c44437643
Re: [PATCH v3 1/3] hw/riscv: add CVA6 machine
Quoted 108 lines · Ben Dooks
Add a (currently Genesy2 based) CVA6 machine.
Has SPI and UART, the GPIO and Ethernet are currently black-holed as there is no hardware model for them (lowRISC ethernet and Xilinx GPIO)
Signed-off-by Ben Dooks <[email protected]>---
v3:
- fix missed plic comment
- made 64bit only for now
v2:
- whitespace fixes
- useg_autofreeon plic
v1:
- squashed in fixes for sd-card and new qemu init
- move to spdx for cva6 machine
- code cleanups missed in first reviewupdated plic regmap
make cva6 64bit for now
--- hw/riscv/Kconfig | 11 ++ hw/riscv/cva6.c | 229 ++++++++++++++++++++++++++++++++++++++++ hw/riscv/meson.build | 1 + include/hw/riscv/cva6.h | 88 +++++++++++++++ 4 files changed, 329 insertions(+) create mode 100644 hw/riscv/cva6.c create mode 100644 include/hw/riscv/cva6.hhw/riscv/Kconfig +11
-0@@ -9,6 +9,17 @@ config IBEX # RISC-V machines in alphabetical order +# technically it might be possible to build cva6 32bit +config CVA6 + bool + default y + depends on RISCV64 + select DEVICE_TREE + select SIFIVE_PLIC + select XILINX_SPI + select RISCV_ACLINT + select UNIMP + config MICROCHIP_PFSOC bool default yhw/riscv/cva6.c new file +48
-0@@ -0,0 +1,229 @@ +/* +* QEMU RISC-V Board for OpenHW CVA6 SoC +* +* Copyright (c) 2025 Codethink Ltd +* Ben Dooks <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include "qemu/osdep.h" +#include "qemu/error-report.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "qapi/visitor.h" +#include "hw/boards.h" +#include "hw/irq.h" +#include "hw/loader.h" +#include "hw/sysbus.h" +#include "hw/misc/unimp.h" + +#include "hw/sd/sd.h" +#include "hw/ssi/ssi.h" + +#include "hw/riscv/cva6.h" +#include "hw/riscv/boot.h" +#include "hw/intc/riscv_aclint.h" + +#include "system/system.h" + +#include <libfdt.h> + +#define CVA6_ROM_BASE 0x10000 + +static const MemMapEntry cva6_memmap[] = { + [CVA6_DEBUG ] = {0x0000000 ,0x1000 }, + [CVA6_ROM ] = {CVA6_ROM_BASE ,0x10000 }, + [CVA6_CLINT ] = {0x2000000 ,0xC0000 }, + [CVA6_PLIC ] = {0xC000000 ,0x4000000 }, + [CVA6_UART ] = {0x10000000 ,0x1000 }, + [CVA6_TIMER ] = {0x18000000 ,0x10000 }, + [CVA6_SPI ] = {0x20000000 ,0x800000 }, + [CVA6_ETHERNET ] = {0x30000000 ,0x10000 }, + [CVA6_GPIO ] = {0x40000000 ,0x1000 }, + [CVA6_DRAM ] = {0x80000000 ,0x40000000 }, +}; + +static void cva6_machine_init (MachineState *machine) +{
hw/riscv/cva6.c line 58
Quoted 10 lines
hw/riscv/cva6.c new file +10
-0+MachineClass *mc =MACHINE_GET_CLASS (machine); +MemoryRegion *sys_mem =get_system_memory (); +hwaddr dram_addr = cva6_memmap[CVA6_DRAM ].base; +CVA6State *s =CVA6_MACHINE (machine); +RISCVBootInfo boot_info; + +object_initialize_child (OBJECT (machine),"soc" , &s->soc,TYPE_RISCV_CVA6 ); +qdev_realize (DEVICE (&s->soc),NULL , &error_fatal); + +if (machine->ram_size > mc->default_ram_size) {
This should compare against cva6_memmap[CVA6_DRAM].size instead
Quoted 4 lines
hw/riscv/cva6.c new file +4
-0+error_report ("RAM size is too big for DRAM area" ); +exit (EXIT_FAILURE ); + } +
hw/riscv/cva6.c line 72
Quoted 10 lines
hw/riscv/cva6.c new file +10
-0+memory_region_add_subregion (sys_mem, dram_addr, machine->ram); +riscv_boot_info_init (&boot_info, &s->soc.cpus); + +if (machine->firmware) { +hwaddr firmware_load_addr = cva6_memmap[CVA6_ROM ].base; +riscv_load_firmware (machine->firmware, &firmware_load_addr,NULL ); + } + +if (machine->kernel_filename) { +/* note - we've not tested just loading the kernel w/o uboot */
I don't think this is a useful comment, users can't see it and it seems prone to becoming stale.
If you want you can put something like this in the user documentation (or the wiki page) but it shouldn't be here
Quoted 104 lines
hw/riscv/cva6.c new file +104
-0+riscv_load_kernel (machine, &boot_info, dram_addr, false,NULL ); + } + +} + +static void cva6_machine_class_init (ObjectClass *oc,const void *data) +{ +MachineClass *mc =MACHINE_CLASS (oc); + + mc->desc ="RISC-V board for CVA6" ; + mc->init = cva6_machine_init; + mc->max_cpus =1 ; + mc->default_ram_id ="cva6.ram" ; +/* start with "max" cpu type until we sort out CVA6 type */ + mc->default_cpu_type =TYPE_RISCV_CPU_MAX ; + mc->default_ram_size = cva6_memmap[CVA6_DRAM ].size; +}; + +static void cva6_soc_init (Object *obj) +{ +CVA6SoCState *s =RISCV_CVA6 (obj); + +object_initialize_child (obj,"cpus" , &s->cpus,TYPE_RISCV_HART_ARRAY ); +} + +static void cva6_add_spi (CVA6SoCState *s,const MemMapEntry *map) +{ +DriveInfo *dinfo; +BlockBackend *blk; +DeviceState *card_dev; +qemu_irq sd_cs; +DeviceState *sddev; +SysBusDevice *busdev; +DeviceState *spi_dev; +SSIBus *spi; + + spi_dev =qdev_new ("xlnx.xps-spi" ); +qdev_prop_set_uint8 (spi_dev,"num-ss-bits" ,1 ); +qdev_prop_set_string (spi_dev,"endianness" ,"little" ); + + busdev =SYS_BUS_DEVICE (spi_dev); +sysbus_realize_and_unref (busdev, &error_fatal); +sysbus_mmio_map (busdev,0 , map->base); +sysbus_connect_irq (busdev,0 ,qdev_get_gpio_in (DEVICE (s->plic),CVA6_SPI_IRQ )); + + spi = (SSIBus *)qdev_get_child_bus (spi_dev,"spi" ); + + sddev =ssi_create_peripheral (spi,"ssi-sd" ); + sd_cs =qdev_get_gpio_in_named (sddev,SSI_GPIO_CS ,0 ); +sysbus_connect_irq (busdev,1 , sd_cs); + + dinfo =drive_get (IF_SD ,0 ,0 ); + blk = dinfo ?blk_by_legacy_dinfo (dinfo) :NULL ; + card_dev =qdev_new (TYPE_SD_CARD_SPI ); +qdev_prop_set_drive_err (card_dev,"drive" , blk, &error_fatal); + +qdev_realize_and_unref (card_dev,qdev_get_child_bus (sddev,"sd-bus" ), &error_fatal); +} + +static void not_implemented (const char *name,const MemMapEntry *map) +{ +create_unimplemented_device (name, map->base, map->size); +} + +static void cva6_soc_realize (DeviceState *dev_soc,Error **errp) +{ +MemoryRegion *system_memory =get_system_memory (); +MachineState *ms =MACHINE (qdev_get_machine ()); +CVA6SoCState *s =RISCV_CVA6 (dev_soc); +const MemMapEntry *memmap = cva6_memmap; +MemoryRegion *rom =g_new (MemoryRegion,1 ); + g_autofree char *plic_hart_config; + +object_property_set_str (OBJECT (&s->cpus),"cpu-type" , ms->cpu_type, + &error_abort); +object_property_set_int (OBJECT (&s->cpus),"num-harts" , ms->smp.cpus, + &error_abort); +object_property_set_int (OBJECT (&s->cpus),"resetvec" ,CVA6_ROM_BASE , + &error_abort); +sysbus_realize (SYS_BUS_DEVICE (&s->cpus), &error_fatal); + +/* boot rom */ +memory_region_init_rom (rom,OBJECT (dev_soc),"riscv.cva6.bootrom" , + memmap[CVA6_ROM ].size, &error_fatal); +memory_region_add_subregion (system_memory, memmap[CVA6_ROM ].base, + rom); + +/* create PLIC hart topology configuration string */ + plic_hart_config =riscv_plic_hart_config_string (ms->smp.cpus); + +/* MMIO */ + s->plic =sifive_plic_create (memmap[CVA6_PLIC ].base, + plic_hart_config, ms->smp.cpus,0 , +CVA6_PLIC_NUM_SOURCES , +CVA6_PLIC_NUM_PRIORITIES , +CVA6_PLIC_PRIORITY_BASE , +CVA6_PLIC_PENDING_BASE , +CVA6_PLIC_ENABLE_BASE , +CVA6_PLIC_ENABLE_STRIDE , +CVA6_PLIC_CONTEXT_BASE , +CVA6_PLIC_CONTEXT_STRIDE , + memmap[CVA6_PLIC ].size); + + riscv_aclint_swi_create(memmap[CVA6_CLINT].base, 0,
hw/riscv/cva6.c line 186
Quoted 10 lines
hw/riscv/cva6.c new file +10
-0+ ms->smp.cpus, false); + +riscv_aclint_mtimer_create ( + memmap[CVA6_CLINT ].base +RISCV_ACLINT_SWI_SIZE , +RISCV_ACLINT_DEFAULT_MTIMER_SIZE ,0 , ms->smp.cpus, +RISCV_ACLINT_DEFAULT_MTIMECMP ,RISCV_ACLINT_DEFAULT_MTIME , +CLINT_TIMEBASE_FREQ , true); + +/* something in cva6-sdk uboot seems to prod the debug +* unit by accident, so make it not implemented */
The comment should follow the QEMU code style
https://www.qemu.org/docs/master/devel/style.html#comment-style
Quoted 7 lines
hw/riscv/cva6.c new file +7
-0+not_implemented ("debug" , &memmap[CVA6_DEBUG ]); + +/* 16550 uart, one 32bit register per 32bit word */ + + serial_mm_init(system_memory, memmap[CVA6_UART].base, 2, + qdev_get_gpio_in(DEVICE(s->plic), CVA6_UART_IRQ), + 50*1000*10000,
hw/riscv/cva6.c line 203
Quoted 10 lines
hw/riscv/cva6.c new file +10
-0+ serial_hd(0), DEVICE_LITTLE_ENDIAN); + +/* just unimplement the timers, network and gpio here for now. +* no-one seems to be using the apb timer block anyway*/ +not_implemented ("net" , &memmap[CVA6_ETHERNET ]); +not_implemented ("gpio" , &memmap[CVA6_GPIO ]); +not_implemented ("timer" , &memmap[CVA6_TIMER ]); + +/* connect xilinx spi block here */ +cva6_add_spi (s, &memmap[CVA6_SPI ]);
Is the SPI really part of the SoC? Usually SPI blocks are part of the machine/board.
Alistair
Quoted 136 lines
hw/riscv/cva6.c new file +26
-0+} + +static void cva6_soc_class_init (ObjectClass *oc,const void *data) +{ +DeviceClass *dc =DEVICE_CLASS (oc); + + dc->realize = cva6_soc_realize; + dc->user_creatable = false; +}; + +static const TypeInfo cva6_types[] = { + { + .name =TYPE_RISCV_CVA6 , + .parent =TYPE_DEVICE , + .instance_size =sizeof (CVA6SoCState), + .instance_init = cva6_soc_init, + .class_init = cva6_soc_class_init, + }, { + .name =TYPE_CVA6_MACHINE , + .parent =TYPE_MACHINE , + .instance_size =sizeof (CVA6State), + .class_init = cva6_machine_class_init, + } +}; + +DEFINE_TYPES (cva6_types)hw/riscv/meson.build +1
-0@@ -2,6 +2,7 @@ riscv_ss = ss.source_set() riscv_ss.add(files('boot.c')) riscv_ss.add(when: 'CONFIG_RISCV_NUMA', if_true: files('numa.c')) riscv_ss.add(files('riscv_hart.c')) +riscv_ss.add(when: 'CONFIG_CVA6', if_true: files('cva6.c')) riscv_ss.add(when: 'CONFIG_OPENTITAN', if_true: files('opentitan.c')) riscv_ss.add(when: 'CONFIG_RISCV_VIRT', if_true: files('virt.c')) riscv_ss.add(when: 'CONFIG_SHAKTI_C', if_true: files('shakti_c.c'))include/hw/riscv/cva6.h new file +88
-1@@ -0,0 +1,88 @@ +/* +* QEMU RISC-V Board for OpenHW CVA6 SoC +* https://github.com/openhwgroup/cva6/tree/master/corev_apu +* +* Copyright (c) 2025 Codethink Ltd +* Ben Dooks <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#ifndef HW_CVA6_H +#define HW_CVA6_H + +#include "hw/riscv/riscv_hart.h" +#include "hw/intc/sifive_plic.h" +#include "hw/char/serial-mm.h" + +#include "hw/boards.h" +#include "hw/sysbus.h" +#include "qom/object.h" + +#define TYPE_RISCV_CVA6 "riscv.cva6.soc" +OBJECT_DECLARE_SIMPLE_TYPE(CVA6SoCState, RISCV_CVA6) + +typedef struct CVA6SoCState { +/*< private >*/ +DeviceState parent_obj; + +/*< public >*/ +RISCVHartArrayState cpus; +DeviceState *plic; +MemoryRegion rom; + +uint32_t resetvec; +}CVA6SoCState ; + +#define TYPE_CVA6_MACHINE MACHINE_TYPE_NAME("cva6") +OBJECT_DECLARE_SIMPLE_TYPE(CVA6State, CVA6_MACHINE) + +typedef struct CVA6State { +/*< private >*/ +MachineState parent_obj; + +/*< public >*/ +CVA6SoCState soc; +} +CVA6State ; + +enum { +CVA6_DEBUG , +CVA6_ROM , +CVA6_CLINT , +CVA6_PLIC , +CVA6_UART , +CVA6_TIMER , +CVA6_SPI , +CVA6_ETHERNET , +CVA6_GPIO , +CVA6_DRAM , +}; + +enum { +CVA6_UART_IRQ =1 , +CVA6_SPI_IRQ =2 , +CVA6_ETH_IRQ =3 , +CVA6_TIMER0_OVF_IRQ =4 , +CVA6_TIMER0_CMP_IRQ =5 , +CVA6_TIMER1_OVF_IRQ =6 , +CVA6_TIMER1_CMP_IRQ =7 , +}; + +#define CLINT_TIMEBASE_FREQ 25000000 + +/* +* plic register interface in corev_apu/rv_plic/rtl/plic_regmap.sv +* https://github.com/pulp-platform/rv_plic/blob/master/rtl/plic_regmap.sv +*/ + +#define CVA6_PLIC_NUM_SOURCES 32 +#define CVA6_PLIC_NUM_PRIORITIES 7 +#define CVA6_PLIC_PRIORITY_BASE 0x0000 +#define CVA6_PLIC_PENDING_BASE 0x1000 +#define CVA6_PLIC_ENABLE_BASE 0x2000 +#define CVA6_PLIC_ENABLE_STRIDE 0x80 +#define CVA6_PLIC_CONTEXT_BASE 0x200000 +#define CVA6_PLIC_CONTEXT_STRIDE 0x1000 + +#endif /* HW_CVA6_H */ --2.37.2.352.g3c44437643
PATCH v3 2/3 target/riscv: add cva6 core type
In reply to Ben DooksAdd TYPE_RISCV_CPU_CVA6 for the CVA6 core
--- target/riscv/cpu-qom.h | 1 + target/riscv/cpu.c | 11 +++++++++++ 2 files changed, 12 insertions(+)
target/riscv/cpu-qom.h +1 -0
@@ -34,6 +34,7 @@#define TYPE_RISCV_CPU_BASE32 RISCV_CPU_TYPE_NAME("rv32")#define TYPE_RISCV_CPU_BASE64 RISCV_CPU_TYPE_NAME("rv64")#define TYPE_RISCV_CPU_BASE128 RISCV_CPU_TYPE_NAME("x-rv128") +#define TYPE_RISCV_CPU_CVA6 RISCV_CPU_TYPE_NAME("cva6")#define TYPE_RISCV_CPU_RV32I RISCV_CPU_TYPE_NAME("rv32i")#define TYPE_RISCV_CPU_RV32E RISCV_CPU_TYPE_NAME("rv32e")#define TYPE_RISCV_CPU_RV64I RISCV_CPU_TYPE_NAME("rv64i")
target/riscv/cpu.c +11 -0
@@ -3009,6 +3009,17 @@ static const TypeInfo riscv_cpu_type_infos[] = { .misa_mxl_max = MXL_RV64, ), +DEFINE_RISCV_CPU (TYPE_RISCV_CPU_CVA6 ,TYPE_RISCV_VENDOR_CPU , + .misa_ext = RVI | RVM | RVA | RVF | RVD | RVC | RVB | RVS | RVU, + .misa_mxl_max = MXL_RV64, + .cfg.max_satp_mode = VM_1_10_SV39, + .priv_spec = PRIV_VERSION_1_12_0, + .cfg.pmp = true, + .cfg.mmu = true, + .cfg.ext_zifencei = true, + .cfg.ext_zicsr = true, + ), +DEFINE_RISCV_CPU (TYPE_RISCV_CPU_SIFIVE_E51 ,TYPE_RISCV_CPU_SIFIVE_E , .misa_mxl_max = MXL_RV64 ),
Signature · 1 line
2.37.2.352.g3c44437643
Re: [PATCH v3 2/3] target/riscv: add cva6 core type
Quoted 4 lines · Ben Dooks
Add
TYPE_RISCV_CPU_CVA6for the CVA6 coreSigned-off-by Ben Dooks <[email protected]>
Alistair
Quoted 43 lines
--- target/riscv/cpu-qom.h | 1 + target/riscv/cpu.c | 11 +++++++++++ 2 files changed, 12 insertions(+)target/riscv/cpu-qom.h +1
-0@@ -34,6 +34,7 @@#define TYPE_RISCV_CPU_BASE32 RISCV_CPU_TYPE_NAME("rv32")#define TYPE_RISCV_CPU_BASE64 RISCV_CPU_TYPE_NAME("rv64")#define TYPE_RISCV_CPU_BASE128 RISCV_CPU_TYPE_NAME("x-rv128") +#define TYPE_RISCV_CPU_CVA6 RISCV_CPU_TYPE_NAME("cva6")#define TYPE_RISCV_CPU_RV32I RISCV_CPU_TYPE_NAME("rv32i")#define TYPE_RISCV_CPU_RV32E RISCV_CPU_TYPE_NAME("rv32e")#define TYPE_RISCV_CPU_RV64I RISCV_CPU_TYPE_NAME("rv64i")target/riscv/cpu.c +11
-1@@ -3009,6 +3009,17 @@ static const TypeInfo riscv_cpu_type_infos[] = { .misa_mxl_max = MXL_RV64, ), +DEFINE_RISCV_CPU (TYPE_RISCV_CPU_CVA6 ,TYPE_RISCV_VENDOR_CPU , + .misa_ext = RVI | RVM | RVA | RVF | RVD | RVC | RVB | RVS | RVU, + .misa_mxl_max = MXL_RV64, + .cfg.max_satp_mode = VM_1_10_SV39, + .priv_spec = PRIV_VERSION_1_12_0, + .cfg.pmp = true, + .cfg.mmu = true, + .cfg.ext_zifencei = true, + .cfg.ext_zicsr = true, + ), +DEFINE_RISCV_CPU (TYPE_RISCV_CPU_SIFIVE_E51 ,TYPE_RISCV_CPU_SIFIVE_E , .misa_mxl_max = MXL_RV64 ), --2.37.2.352.g3c44437643
PATCH v3 3/3 hw/riscv: set cva6 to use TYPE_RISCV_CPU_CVA6
In reply to Ben DooksChange to using TYPE_RISCV_CPU_CVA6 once this is merged.
--- hw/riscv/cva6.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
hw/riscv/cva6.c +1 -2
@@ -83,8 +83,7 @@ static void cva6_machine_class_init(ObjectClass *oc, const void *data) mc->init = cva6_machine_init; mc->max_cpus =1 ; mc->default_ram_id ="cva6.ram" ; -/* start with "max" cpu type until we sort out CVA6 type */ - mc->default_cpu_type =TYPE_RISCV_CPU_MAX ; + mc->default_cpu_type =TYPE_RISCV_CPU_CVA6 ; mc->default_ram_size = cva6_memmap[CVA6_DRAM ].size; };
Signature · 1 line
2.37.2.352.g3c44437643
Re: [PATCH v3 3/3] hw/riscv: set cva6 to use TYPE_RISCV_CPU_CVA6
Quoted 2 lines · Ben Dooks
Change to using
TYPE_RISCV_CPU_CVA6once this is merged.
You can also just change the patch order to not require this patch
Quoted 2 lines
Signed-off-by Ben Dooks <[email protected]>
Alistair
Quoted 22 lines
--- hw/riscv/cva6.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)hw/riscv/cva6.c +1
-3@@ -83,8 +83,7 @@ static void cva6_machine_class_init(ObjectClass *oc, const void *data) mc->init = cva6_machine_init; mc->max_cpus =1 ; mc->default_ram_id ="cva6.ram" ; -/* start with "max" cpu type until we sort out CVA6 type */ - mc->default_cpu_type =TYPE_RISCV_CPU_MAX ; + mc->default_cpu_type =TYPE_RISCV_CPU_CVA6 ; mc->default_ram_size = cva6_memmap[CVA6_DRAM ].size; }; --2.37.2.352.g3c44437643