Add FriendlyElec NanoPi M5 support for Rockchip RK3576
Subsystems (2)
v2 cover Add FriendlyElec NanoPi M5 support for Rockchip RK3576
This series adds device tree support for the FriendlyElec NanoPi M5 board, powered by the Rockchip RK3576 SoC (4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). The patches enable basic booting and connectivity, including dual 1Gbps Ethernet, USB 3.2, microSD, M.2 PCIe NVMe, and HDMI.
Changes in v2:
- Fixed DT schema warnings (Rob Herring):
- Renamed spi-nor@0 to flash@0
- Renamed pmic@23 pinctrl nodes to end with -pins
- Renamed hym8563@51 to rtc@51 and removed clock-frequency
- Renamed button@1 to button-user
- Addressed Heiko Stuebner's feedback:
- Sorted non-addressed nodes alphabetically
- Added blank lines in regulator nodes
- Improved fspi1m1_pins comment to clarify SPI NOR flash pinmux
- Moved status property in saradc to last
Patch 1: Updates DT bindings in rockchip.yaml Patch 2: Adds NanoPi M5 device tree and Makefile entry
No MAINTAINERS update needed, as the new file is covered by the existing ARM/Rockchip SoC entry.
Tested on NanoPi M5 with successful boot and feature validation.
---
John Clark (2):
dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board
arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support
.../devicetree/bindings/arm/rockchip.yaml | 6 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3576-nanopi-m5.dts | 1001 +++++++++++++++++ 3 files changed, 1008 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts
Signature · 1 line
2.39.5
PATCH v2 1/2 dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board
Add device tree documentation for rk3576-nanopi-m5
--- Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/arm/rockchip.yaml +6 -0
@@ -295,6 +295,12 @@ properties: - friendlyarm,nanopi-r4s-enterprise - const: rockchip,rk3399 + - description: FriendlyElec NanoPi M5 series boards + items: + - enum: + - friendlyarm,nanopi-m5 + - const: rockchip,rk3576 + - description: FriendlyElec NanoPi R5 series boards items: - enum:
Signature · 1 line
2.39.5
PATCH v2 2/2 arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support
In reply to John ClarkAdd device tree for FriendlyElec NanoPi M5 with Rockchip RK3576 SoC (4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). Enables basic booting and connectivity.
Supported features:
- RK3576 SoC
- 4GB/8GB/16GB LPDDR4X/LPDDR5 RAM
- 16MB SPI Nor Flash
- 2x 1Gbps Ethernet
- 2x USB 3.2 Gen 1 Type-A ports
- microSD UHS-I
- M.2 M-Key PCIe 2.1 x1 NVMe support
- HDMI 1.4/2.0 (up to 4096x2304@60Hz)
- 30-pin GPIO (2x SPI, 4x UART, 3x I2C, 5x PWM, 20x GPIO)
- Debug UART
- RTC with HYM8563TS
- Power via USB-C (PD, 6V~20V)
--- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3576-nanopi-m5.dts | 1001 +++++++++++++++++ 2 files changed, 1002 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts
arch/arm64/boot/dts/rockchip/Makefile +1 -0
@@ -148,6 +148,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-luckfox-omni3576.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-m5.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb
arch/arm64/boot/dts/rockchip/rk3576-nanopi-m5.dts new file +1001 -0
1,001 lines not on this page · raw message
Signature · 1 line
2.39.5